This medical bureau / cabinet shows several signs of being used for a different purpose before being a medical bureau. It once had the words "GENUINE PURE QUALITY" lettered across the top of the front, as can been still seen from the impression left behind in the stained timber. On each drawer above the handle is a faint impression of something long and rectangular, as though there had been a label attached. The front panel of the drawers is made of the same wood as the rest of the outer cabinet, most probably blackwood. The handles on the drawers are not the original handles either. There are 3 filled-in holes that would form the corners of a triangle, apex at the top, around the perimeter of the current handles. The sides of the drawers are made from plywood and the base made from alternating lengthwise strips of oak and beech wood pressed together, rounded corners at the back and joined to the front panel with metal brackets. The backs of the base of the drawers have four round impressions in them. Along the back edge of the base, in the centre, is a rectangular hole. Between the front pair of round holes is a faint black rounded marking, like the impression made by rubber. The cabinet may have once been a filing cabinet, with the drawers used as document drawers, each with a spring-loaded clamp attached to the back of them to secure documents within. The original handles could have been the half-cup type used for filing cabinets. The construction and use of plywood could place this cabinet in about 1950's.Chest of drawers (or Medical Bureau, or Apothecary Chest, or Filing Cabinet) wooden, dark stained, with 30 small drawers (10 rows, 3 columns). The outer wood of cabinet is possibly blackwood and the edges of top and sides have carved wood decoration. Drawer fronts have bevelled edges and round silver-coloured metal knobs. Drawers have plywood sides, and oak and beech wood bases/, Each drawer has four round depressions (in a square-shaped arrangement) at the back plus a small rectangular hole cut in the centre back of base. A faint impression from previous lettering is evident in the wood stain across top front of cabinet.Impression of previous lettering across top front of cabinet "GENUINE PURE QUALITY". flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, drawers, bureau, cabinet, chest of drawers, furniture, bedroom furniture, household storage, medical bureau, apothecary cabinet, document drawers, filing cabinet

Set of 10 Digital Images of the work involved in the repairs to tram No. 40 during the period 7/8/2004 to 26/12/2004. .1 - No. 1 end panel removed .2 - work to sand down underway - not top gutter rail. .3 - Trolley with trolley pole bases .4 - damaged to gutter metal work .5 - close up showing the rust to the metalwork at No. 1 end drivers dash .6 - removed panels .7 - rust to the gutter metal work .8 - Alastair Reither sanding one of the pillars .9 - ditto .10 - work progressing with undercoat and new timber panel - ex the packing case that arrived with the Isolating Transformer.trams, tramways, btm, maintenance, painting, tramcars, trolley poles, tram 40

Thomas Stoddart (1828 - 1905) bought 12 white marble statues during a visit to Italy. Stoddart arranged for them to be shipped to Victoria and placed on pedestals of Sicilian marble and on bases of Victorian granite. These statues were unveiled in the gardens on Queen Victoria's birthday, 24th May, 1884. His intention was for the statues to adorn and add interest to the gardens. Roman goddess of flowers is watering flowers at her feet and is dressed in a classical garment. Flora is considered by many to be the masterpiece of the twelve because of the fi ne detail which creates such a pretty picture in stone. This portrayal of the Roman goddess of flowers shows her watering a pot of luscious blooms with a basket of flowers on her arm. Her position is a highly visible one between the Statuary Pavilion and the fernery pond.The artwork is of historic and aesthetic significance to the people of BallaratWhite marble figure of a woman who is watering flowers at her feet and is dressed in a classical garmentFloraflora, stoddard

The Australian Service Canteen Organisation operated from 1959 - 1979 and served troops throughout Australia, Papua New Guinea and Vietnam by providing services such as canteens, bulk stores, snack bars, news agencies and bank agencies. ASCO became the Army Air Force Canteen Service [AAFCANS] in 1979. This included provision of services in Army bases such as the barracks at Bandiana, Victoria outside of Wodonga. Noritake is a well-known producer of a wide range of merchandise including high quality, western-style dinnerware for export. On January 1, 1904 the Nippon Toki Kaisha Ltd - the forerunner to the present Noritake Company - was formed in a small town near Nagoya, Japan. The maker's mark "Noritake N Japan" mark has been used since 1968.A china dinner plate bearing the logo of Australian Organization Services Canteens in gold paint. The maker's mark of Noritake Japan is printed underneath the plate.Logo - Australian Organization Services Canteens Maker's Mark - Noritake ® JAPANnoritake, australian services canteens, chinaware

The patches and insignia belonged to Arthur COWLEY RAAF. He enlisted on 22.1.1942 age 18 years 6 months as No 50704 which was a ground staff No. From 12.2.1942 to 12.9.43 he went through various courses at Sale, Lake Boga, Somerset, Richmond and Adelaide. Finally accepted into Aircrew he embarked from Melbourne for Canada for training as a Bomb Aimer on 27.9.1943, arriving Canada via San Francisco 19.10.1943. He then attended Bomb Aimers Courses at Mossbank and Edmonton. Granted a Commission as a Flying Officer on 24.3.1943, embark for England 10.4.1944 and posted to various bases for advanced training. Finally on 7.3.1945 he is posted to No 462 Sqd RAAF flying Halifax Bombers in Bomber Command and begins operations from Foulsham. Arthur completes 8 missions before the war is over with Germany. Departs England 28.11.1945 for Australia and is discharged on 11.1.1946. .1) Bomb Aimers Wings, Cloth, dark blue background with White "B" and Wing. .2) Shoulder Badge, cloth, dark blue with light blue "Australia"& Eagle. .3) Rank Badge, light blue propellor on dark blue background. .4) Badge Shoulder, cloth, Australia light blue on a dark background. .5) Badge Shoulder, cloth, light blue eagle on a dark blue background.air force, raaf, badges uniform

Image depicting the explosion of a ship, filled with TNT and ammunition, hit during the first Japanese air raid on Australia's mainland, at Darwin on 19 February 1942. In the foreground is HMAS Deloraine which survived unscathed. On that day, 236 people were killed when 242 Japanese aircraft, in two separate raids, attacked the town, ships in Darwin's harbour and the town's two airfields in an attempt to prevent the Allies from using them as bases to contest the invasion of Timor and Java during World War II. MV Neptuna was a 5,952 ton cargo motor vessel. and was 1 of 11 sunk during the Japanese air raid on Darwin on 19 February 1942. In January 1942 HMAS Deloraine evaded an attack by the Japanese submarine I-124 north-west of Darwin and was jointly credited with the submarines' sinking after she inflicted the initial damage. The Bombing of Darwin, also known as the Battle of Darwin, on 19 February 1942 was the largest single attack ever mounted by a foreign power on Australia. Brown timber frame containing blue black and white print of ships being bombed.February 19th 1942, Darwin Harbour In the foreground the corvette HMAS Deloraine. Smoke billowing in the background is from burning oil tanks on shore, the mushroom cloud is from the explosionof the ammunition ship Neptuna. Watercolour by Tom Offordbombing of darwin, battle of darwin, 19 february 1942, ww2, mv neptuna, hmas deloraine

The Answer is a newsletter in magazine format that is sent to the widows that are helped by Melbourne Legacy. For the widows who are sight impaired a copy of the newsletter is audio described onto CD by Vision Australia and posted to them. It contains information about meetings and activities. This edition contained articles on Prince Philip and his involvement with Legacy. Also Legacy's role in building the Shrine of Remembrance. An article outlining how our archive project led to the chance reconnection of a long lost diary to the family of Priscilla Wardle - a World War 1 nurse. An article on Youth Programs and camps. Legacy Week 2021 was again held in lockdown conditions in Victoria so there was a emphasis on a Legacy Teddy Bear Picnic and Legacy Bear Hunt. Other virtual fundraisers were 'Battle of the Bases' and 'Lunge for Legacy'. Plus photos of our programs such as the walking group, the stamp ladies, and widows club gatherings.A record that Melbourne Legacy helps coordinate and organise events and activities for the widows, and provides items of interest for their enjoyment.Compact disc x 2 in a case that contains the audio recording of The Answer from Oct/Nov 2021.activities, answer, widows

Zilles Printers was begun by Lewis Zilles in the early 1930s. It was in McKenzie Street Ballarat. His son Jeffrey also became a printer - letterpress, offset and screen printer. The business became Zilles Printers/Graphics and was in Armstrong Street and later Bell Street Ballarat. Items are work done for the Australian Defence Force bases at Portsea and Queenscliff. They were training bases - Officer Cadet School and Australian Staff College. Originally the base at Portsea was the Quarantine Station established in the late 1800s. International protocols required captains of arriving ships to provide a clean bill of health from the last port of call. If this was not possible all on board would be transferred to the Quarantine Station by boat for observations. This was to stop the spread of diseases such as cholera, small pox, typhoid fever, influenza and the plague. In 1952 it became a military training base - Officer Cadet School. The quarantine station still operated and the Army had to be prepared to evacuated in an emergency. This occurred in 1954 when 113 passengers on board the Strathaird were quarantined with smallpox. Cadets and staff came with their families and was a small township. Training for the Vietnam War was here, Now gone the remnants of the quarantine station and army activites can be seen. Under Point Nepean Community Trust. Fort Queenscliff dates from 1860 when it was an open battery known as Shortlands Bluff. The Garrison included volunteer artillery, engineers and infantry. It was a Coastal Defence Installation from 1883-1946. The base on Swan Island was part of this and soldiers from the Fort would go on detail to the Island each day. A permanent group with their families were housed there. The children would attend the local school in Queenscliff. It eventually became and still is a restricted area. In 1946 the Fort became home of the Army Command and Staff College. Officers came from overseas to train. Families would come with them and be accommodated in the main officers residence "Maytone" or private housing rented by the Army. Their children would attend local schools. Staff Colleges were all moved to Canberra. The Fort is now the Army Soldiers Career Management Agency and houses all historical documents related to the Army. .1 Off-white card with gold badge and black writing. .2 White card with separate page held together with blue and red ribbon. Badge in gold on front. Two Officer Cadet School flags - crossed and Christmas Greeting in blue inside card. .3 Off-white paper with Australian Staff College emblem. Blue print.2 Officer Cadet School emblem - lion and crown in centre. Flags - British and Australian .3 Emblem - crossed swords, owl and crownzilles printers, australian defence force, quarantine station portsea, officer cadet school, fort queenscliff, open battery, swan island, staff college, army command, zilles collection

Popularly known today as Z Special Unit, or by the wartime cover names of Inter-Allied Services Department (ISD) and Services Reconnaissance Department (SRD), Special Operations Australia (SOA) was the Special Operations component of the US-led Allied Intelligence Bureau in the Pacific Theatre during the Second World War. The first in a set of five, Volume 1 – Organization tells the story of the establishment, organisation and function of SOA from its earliest days as a direct offshoot of the British Special Operations Executive, until the organisation’s disbandment after a long, brutal and bloody conflict. Introduced by clandestine operations and espionage writer C.A. Brown, Volume 1 tells the story of the establishment of SOA and its fight for survival as a British-oriented Special Ops organisation under American command, while giving the Imperial Japanese invaders a bloody nose all the way from New Guinea to Indochina. Covering in detail the major personalities, departments, directorates, training and operational bases of SOA, Volume 1.Soft cover with 200 pagesaustralian commandos, special operations, special forces, world war ii

Some ecological bases for Australian tribal boundaries /? Norman B. Tindale Man and ecology in the highlands of southeastern Australia : a case study /? Josephine Flood The natural and cultural areas of Aboriginal Australia : a preliminary analysis of population groupings with adaptive significance /? Nicolas Peterson 'The chain of connection' : the material evidence /? D.J. Mulvaney Realities and transformations : the tribes of the Western Desert of Australia /? Joseph B. Birdsell Structure, event and ecology in Aboriginal Australia : a comparative viewpoint /? Aram A. Yengoyan Territoriality and the problem of demarcating sociocultural space /? Ronald M. Berndt Communication and change in mythology /? Kenneth Maddock Levels of organisation and communication in Aboriginal Australia /? D.H. Turner Boundaries and kinship systems in Aboriginal Australia /? F.G.G. Rose Tribes, languages and other boundaries in northeast Queensland /? R.M.W. Dixon Aboriginal language distribution in the Northern Territory /? E.P. Milliken.maps, b&w photographs, diagramsecology, environment, sociology, kinship systems, language distribution

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top. An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Iron; small flat domestic iron.Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, iron, flat iron, domestic iron, laundery, ironing equipment, sad iron

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today.Clothes Iron, wedge shaped, cast iron painted black with cylindrical handle small funnel through centre of handle.Noneflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry equipment, sad iron, domestic object

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with traces of original black finish on handle. Noneflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose

Blacksmiths started forging simple flat irons in the late Middle Ages. Plain metal irons were heated by a fire or on a stove. Some were made of stone. Earthenware and terracotta were also used, from the Middle East to France and the Netherlands. Flat irons were also called sad irons or smoothing irons. Metal handles had to be gripped in a pad or thick rag. Some irons had cool wooden handles and in 1870 a detachable handle was patented in the US. This stayed cool while the metal bases were heated and the idea was widely imitated. Cool handles stayed even cooler in "asbestos sad irons". The sad in sad iron (or sadiron) is an old word for solid, and in some contexts this name suggests something bigger and heavier than a flat iron. Goose or tailor's goose was another iron name, and this came from the goose-neck curve in some handles. In Scotland people spoke of gusing (goosing) irons. At least two irons were needed on the go together for an effective system, one would be in use, and the other re-heating. Large households with servants had a special ironing-stove for this purpose. Some were fitted with slots for several irons, and a water-jug on top.An early domestic object that gives an insight into how the ironing of clothes was done before the electric type irons we use and take for granted today. Flat iron cast iron with stand None item too badly corrodedflagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, iron, flat iron, laundry, clothes ironing, sad iron, tailors goose

Old Ballarat Pottery was set up by John Gilbert as part of the Old Ballarat Village, opposite Sovereign Hill. Gilbert had lectured at Ballarat College of Advanced Education before establishing the Edinburgh Pottery at Sovereign Hill in 1972 to enable visitors to see traditional trades at work. The Old Ballarat Pottery was a much larger concern, producing wares for sale through department stores and on party plan via Faberware as well as through the village. Early works looked as though they might have been made in the 1850s, with unturned bases, crude marks and dark treacle-like glazes. Peter Pilven, one of Gilbert's students, worked there after graduating from the Ballarat College of Advanced Education, teaching throwing to students like the potter John Ferguson, who was there from 1978-79. Potters were initially employed by Gilbert's company Pontresina Pty Ltd, registered in 1973. (The Old Ballarat Pottery was registered as a company from 1984-1994.) Early works are marked with an impressed long-tailed 'B', or an 'OB' on either side of a mine tower. A printed stamp also features a mine tower surrounded by the text 'Old Ballarat Pottery Made in Australia'. Later work is impressed 'Stoneware Old Ballarat Pottery Australia' with a kangaroo.Hand thrown blue glazed jug.Stamped 'Stoneware Old Ballarat Pottery?old ballarat pottery, australian studio pottery, jug, pontresina, ceramics

Old Ballarat Pottery was set up by John Gilbert as part of the Old Ballarat Village, opposite Sovereign Hill. Gilbert had lectured at Ballarat College of Advanced Education before establishing the Edinburgh Pottery at Sovereign Hill in 1972 to enable visitors to see traditional trades at work. The Old Ballarat Pottery was a much larger concern, producing wares for sale through department stores and on party plan via Faberware as well as through the village. Early works looked as though they might have been made in the 1850s, with unturned bases, crude marks and dark treacle-like glazes. Peter Pilven, one of Gilbert's students, worked there after graduating from the Ballarat College of Advanced Education, teaching throwing to students like the potter John Ferguson, who was there from 1978-79. Potters were initially employed by Gilbert's company Pontresina Pty Ltd, registered in 1973. (The Old Ballarat Pottery was registered as a company from 1984-1994.) Early works are marked with an impressed long-tailed 'B', or an 'OB' on either side of a mine tower. A printed stamp also features a mine tower surrounded by the text 'Old Ballarat Pottery Made in Australia'. Later work is impressed 'Stoneware Old Ballarat Pottery Australia' with a kangaroo.Hand thrown black glazed bottle with lip. Stamped 'Stoneware Old Ballarat Pottery' and impressed with a long tailed B.old ballarat pottery, australian studio pottery, pontresina, bottle

The two hand-held, portable kerosene lamps each have green enamel caps over the glass. They were used from around the 1930s until 1993, and one is now located on the groundfloor level of the lighthouse and the other is in the assistant lightkeeper’s quarters. The brand name of the Point Hicks lamp, while not stated is probably Coleman, Tilley or Austramax, which were all similarly made, portable pressurised kerosene lamps. Coleman brand pressure lamps and lanterns were first made in about 1905 by American, William Coleman, and their English competitor was the firm, Tilley. The Australian company Austramax began manufacturing kerosene pressure lamps in Brunswick in 1946, making the bases and the workings by hand, turning out 1000s of lamps each week. Portable lamps were used worldwide where bright light was needed and they became essential as an emergency back-up source of light for the lightstation as well as the lantern room. Through the multiplication of light by the lighthouse lenses, they could provide a tower with a 26 nautical mile range. Lamps similar to the two Point Hicks examples can be found at Gabo Island, one of which is a green enamelled Austramax lamp; Cape Nelson (Austramax), and similar lamps are held at Cape Schanck and Cape Otway. The two Point Hicks lamps have first level contributory significance for their historic value and provenance, and as representative examples of lamps that were widely used in Australian lightstations between the 1930s and 1960s.PHLS0008.1 & PHLS0008.2 Pressurised kerosene lamp, cover over glass is made of green enamelled metal.

Eleven photocopies of Plaza Theatre Bendigo images including documentation. 1 Plaza Theatre Bendigo upstairs auditorium, 2 Ground floor entrance Plaza Bendigo 1936 and name of film starring Gary Grant Constance Bennett 'Big Brown Eyes', 3 Plaza Theatre Mitchell Street Bendigo 1953 film 'Warpath' Edmund O' Brien Dean jagger forest tucker Harry Carey 'Thunder in the East' Alan Ladd Deborah Kerr Charles Boger Phyllis Calvert nearby residents Hamptons Newsagency Melody Bar Pearse dentist Quins bluebird fruit shop Norris's Menswear Matchetts grocery, 'Port Hole Paradise' My Days as an Assistant Projectionist by Micheal Purdon 6 pages, copy of a glass advertising slide, cinema glass advertising slide late 40's early 50's, Plaza theatre Auditorium 1935, Plaza Bendigo 1967 Projector 2X Cummings & Wilson Western Electric Sound Bases Peerless Magnarc Carbon Arc Lamps.bendigo, buildings, plaza theatre

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. The designation "Nippon porcelain" refers to porcelain made in Japan for export to the west, and stamped with the word Nippon on their bases. This practice began in 1891 in response to the U.S. McKinley Tariff Act, which forbade the import of items that weren't "plainly marked, stamped, branded, or labelled in legible English words." Unfortunately, many reproduction or fake pieces were also produced. In 1921 "Nippon" was no longer accepted by U.S. Customs Agents as the correct name of origin so from then on, imported Japanese porcelain was supposed to be marked "Japan". This information helps us to establish provenance of this item as after 1921.This item comes from a collection used by a prominent citizen of Wodonga. It is also an excellent example of Japanese porcelain of the early 20th century.A small teacup and saucer with a design of a couple in a garden. The design is repeated on the saucer. There is a circular pattern in red and gold around top of the cup and the rim of the saucer. Gilt decorations are included on the handle and around the inside of the cup.Under the saucer: Maker's mark inside a triangular shape and below a crown: "FINE CHINA/ Royal Nippon/ MADE IN JAPAN"domestic items, chinaware

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. The designation "Nippon porcelain" refers to porcelain made in Japan for export to the west, and stamped with the word Nippon on their bases. This practice began in 1891 in response to the U.S. McKinley Tariff Act, which forbade the import of items that weren't "plainly marked, stamped, branded, or labelled in legible English words." Unfortunately, many reproduction or fake pieces were also produced. In 1921 "Nippon" was no longer accepted by U.S. Customs Agents as the correct name of origin so from then on, imported Japanese porcelain was supposed to be marked "Japan". This information helps us to establish provenance of this item.This item comes from a collection used by a prominent citizen of Wodonga. It is also an excellent example of Japanese porcelain of the early 20th century.A hand painted coffee cup and saucer with gold trim and floral design. The image includes tones of green shading and pink flowers.The cup and saucer have a gold trim. There are also embossed flowers on the saucer.Under saucer- Backmark - An hourglass surrounded by an upside down laurel wreath. Above the laurel wreath; "Hand Painted" Beneath the laurel wreath "NIPPON"domestic items, japanese porcelain

Original ship - 11,741 gross tons. 589' x 70' x 30' (179.5 x 21.34 x 9.14m). Oil tanker built by Eriksberg Motor Vessels at Gottenburg, Sweden in 1951 for Hjalmar Bjorge of Norway as the Storheim. Purchased November 1964 and renamed R W MILLER. Had a crew of 39 seamen, including the officers. 1973 sold to Independent Shipping Company Pty Ltd of Singapore. Renamed Cherry Victor. Scrapped 1979. Robert Miller traded under the name R W Miller and Company from early 1912. One of Miller's first contracts was to pick up overburden and spoil from the sinking of the Balmain Colliery shaft and dump it at sea. Miller saw the opportunity to sell this material and he ended up getting a sixpence a ton from a local council and other contractors for use as road bases and building foundations. This close association with coal led to Robert W Miller on 15th January 1913 being given the contract for coal distribution from Sydney Harbour Colliery (Balmain mine). So began a long association with coal. Miller built a fleet of lighters that were used to transport blue metal, sand and coal around Sydney Harbour. This introduction into coal transport opened a prospect for him to enter the larger coal shipping transport. During 1917 Miller purchased a vessel, the taking over 1985 by Howard Smith Industries Pty Ltd, Melbourne. Build date 1951-1979. Ship builders model of the tanker R W Miller in a glass case. The body is painted in colours of maroon, green and grey, the deck with detailed fittings and superstructure, an Australian merchant flag flying from the stern, within a mahogany framed glazed display casePlaque at foot of model: M/T R.W. MIILRT/ BUILT GOT. 1951/ OWNERS R.W. MILLER & CO. PTY. LTD/ LENGTH OVERALL 559.04"/ LENGTH BETWEEN P.P 526.06"/ EXTREME BREADTH 70.00"/ MOULDED DEPTH 39.03"/ DEADWEIGHT TONNAGE 18,500/ MACHINERY B & W TYPE A I.H.P 7, 600" on model: "R.W Miller" painted in black

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker