Heyfield Butter Factory Company was formed as a private company in 1890, and became a co-operative in 1891. About 1915 it established an electricity generation unit in the factory, which supplied the town until about 1924, when it was taken over by the State Electricity Commission. The company became part of South Eastern Milk Products in 1960, and Gippsland Consolidated Milk in 1971. In 1973 GCM became part of Murray Goulburn, and was closed in May 1973. This seal was used to stamp (and therefore authenticate) red paper seals on share scripts for the company, from c.1915 to 1960.Important historically as the ultimate authority for the identity of a company that was an important factor in the commercial life of Heyfield and the surrounding district for over eighty years. It has community significance as the ultimate legal authority for issuing shares in a large, locally controlled co-operative.A metal seal / stamp for the Heyfield Butter Factory and Electricity Supply Co. It consists of a short arm that pivots above two round dies.The whole is in black metal on a rectangular base, with remnant transfers.dairy factories, electricity supply

List of volunteers from Kardella and Kardella School in the Australian Imperial Forces during WWI.One of the few remaining historic items from the hamlet of Kardella near Korumburra in Gippsland, Victoria.Honour roll made of varnished wood, with two panels, a triangular pediment and side columns tapering at top and base, text in black and gold. Kardella State School No.3196, Honor Roll 1914 The Great War 1919, Duty Nobly Done. * Died in service. Allcorn H., * Ambler L., Ambler, M., Barns C., * Blackmore H., Brydon A., Brydon T., * Cartright J., Chisholm E., Cosson H., Cullen A., * Cullen F., Cullen W., Curran J., Curran R., * Dick A., Dick H., * Dick J., Drownley C., * Dryden H., Elmore A., Elmore G., * Elmore T., Gravell W., Griffin A., Hastings F., Hort S., * Le Maitre A., Mitchell H., Mitchell S., Murray D., Murray E., * McNair A., McNair W., McNaughton D., Paterson B., * Richards H., Richards L., Simpson J., Spry L., Stubbs A., Stubbs B., Stubbs G., Thompson H., Tolson C., * Walker T., Wilkinson A., * Wilkinson R., Wilkinson S., Wilson R., Wynne G.kardella, w.w.i, school, honour roll

Printed copy of testimonials of Geo. Albert Pethard R.H.A. submitted by: B.G. Humfrey, Major Commanding C./14th R.A. - F.G.E. Warren, Lt.Col. R. A. Late Commanding C/B. R.H.A. - J. Ross Murray M.D. Surgeon Major, In Medical Charge, R.A. Division. - T. Langrish, Q.M.R.H.A. Acting Adjt. R.A. Rawal Pindi, Dn. - G. A. Wilson, Capt. Station Staff Officer. Dated Ootacamund, 29th July 1880. Also an handwritten copy of radio broadcast by 3BO 26/09/57 at 10.20 pm.

Newspaper cuttings (Argus,8 July 1861) re Murray River Railway. enclosed in a buff envelope 'The Australasian T.& G. Mutual Life, Assurance Society Ltd.letterhead on exterior. a. 'Progress of the works' 2/7/1861; b. 'Opening of the line to Woodend' 8/7/1861; c. Paragraph on first official train trip to Woodend (Argus? 7/1861) Connection to Watson family possibly through mention of Mr. G.W. Knight, the district engineer of the Sunbury section of the railway.person, individual, basil watson

Reproduction done for Port of Echuca c.1980 heritage project. Henry Hopwood who founded Echuca in 1853, made the following charges for the use of his punt across the Murray River utiliising his own tokens. Charges - one penny for 2 sheep, six pence for 1 cow or head of cattle, ninepende for 1 horse, 18 pence for 1 horseman, "footmen" were free. 2 reproduction Hopwood Pennies, in frame with gold surrounds, pennies in centre of frameInscription BRIDGE HOTEL 1858 on one penny shows scene of Bridge Hotel and the other has inscripition HOPWOODS PUNT ECHUCA 1857 One Penny and scene of same.

Typed and handwritten notes. Mentioned are: - Some Notes Concerning The Eaglehawk Logs, Damaging the Stormwater Channel, where some Chinese were digging away the Creek, the cutting down of the giant gum tree which gave One Tree Hill its name, How Anthony Trollope saw Bendigo in the 1870's, A Proposed Horse Tramway to Golden Square, Society’s' Trip to Bridgewater Flour Mill, A talk on a trip to Malaya by Mr D Hester, Society News and Happenings, Old Bendigonians and Safety Cages,document, various notes, eaglehawk logs, bendigo advertiser 19/10/1858, damaging the stormwater channel, bendigo advertiser 11/8/1872, harneys bridge, gas works, constable rogers, constable james bradley, joch, john o'c hattam, one tree hill, ryan, trollope's fabulous bendigo, anthony trollope, 'trollope’s australia', nelson press, alex h stone, bendigo advertiser 5/7/1897, mr peter ellis, cr hoskins, horse tramway, historical society, water wheel flour mill, june parry, mr pat wodetzki, mr leo wodetzki, neil murray, mr k hester, mr wes harry, mr i hendry, mr henry jackson, mr connelly, mr irons, mr harney, dr smith, dr hoyle, rev dr bachaus, rev dr nish, rev joseph dare, hon angus mackay, mr haverfield, mr j k robshaw, w p neal, mr george lansell, hon j h abbott, m l c, mr j casey, dr james boyd, dr atkinson, dr easie, mr t h henderson, old beehive, francis brothers, mr john crowley, mr jacob cohn, art gallery, mr hugh mcdevitt, mr alexander bayne, mr f sciallero, camp reserve, hon w i winter-irvine, mr george avery fletcher, great central goldfield of victoria, safety cages, bendigo advertiser, j h seymour, mr horwood, new chum and victoria tribute company, james watson, seymour's patent safety cage, londerry tribute, national show sandhurst, h banfield, mr a llewllyn, 'dear old bendigo', thomas bracken, mr william heffernan, mr edward (ned) ryan, mr samuel bastard, mr charles bird, mcpherson and co, fern hill club, mr george tolhurst, tolhurst brothers, union bank, mr lawrence ryan, mr shadrack jones, charley armstrong, armstrong brothers, mr abraham solomen, mr bladiere mr r t wheeler

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

The original sketches were used by Tatura Museum for an exhibition c.1997, and were photographed before their return to Wittenberg's nephew, who verbally approved of the use of these copies for any purpose.Timber frame with glass front containing four A4 size photographs of sketches. Four sketches by Emil wittenberg depicting conditions on the "Dunera" and in internment camps at Hay and Tatura.The "Dunera" Story. Sketches by Emil Wittenberg."dunera", hay internment camp, tatura internment camps, world war ii, internment camps, emil wittenberg, sketches

Original photograph donated. Tatura Fruit Preserving Cannery located in Brown Street, c.1920. T. Edwards & Manafer E. Quine.Original photograph of Two men standing in front of the Tatura Preserving Cannery building, professionally mounted in B. & W.On back- Tatura Cannery. T.Edwards; E. Quine (Manager).tatura cannery

The original sketches were used by the Tatura Museum for an exhibition c.1997, and were photographed before their return to Wittenberg's nephew, who verbally approved of the use of these copies for any purpose by the Society.23 15 x 10 cms photos of shetches of life as a "Dunera" internee at Hay and Tatura in silver glass fronted frame. Colour sketches of prisoners, their quarters, barracks, suggested coat of arms and banknotes.dunera, hay internment camp, camp 2 internment camp, tatura, internment camp money, internee coat of arms, internment camps, world war ii

Else Oertel was an internee in Camp 3A from 1940-1945. Else (a German) was interned in the same compound as many Italians. Her Italian neighbours, Mr & Mrs Manlio & Henrietta Pecchioni presented this prayer book to her in memory of their internment together. This & other items were donated by her daughter, Else-Lore.Prayer book in Italian language. Book with black cover. Red writing on front cover: "L'Amico del Prigioniero". 486 pages.Inside front cover: C/O of D. Mazzieri Via Vittorio Emanuele 42 Parma Italia|Frontispage: To my Friend with my love. Eta(?) Pecchioni.|Frontispage, again: Inscription in Italian, believed to read "To our dear, kind Friend & companion of misadventure", M. Pecchioni, (internment number) 25234, Tatura 26.7.43tatura, ww2, italian language, camp 3, internment, internee camps, prayer book, books, religion

The original sketches were used by the Tatura Museum for an exhibition c.1997, and were photographed before their return to Wittenberg's nephew, who verbally approved of the use of these copies for any purpose by the Society.Four A4 photographs of colour sketches mounted in a timber frame with glass front. Photo of sketches displaying life on the "Dunera" barracks, bunks and toilet facilities in the internment camps.The "Dunera" Story, Sketches by Emil Wittenberg."dunera", hay internment camp, internment camps, tatura, camp 2, world war ii, emil wittenberg

Tatura Methodist Church c.1950methodist church, photograph, people

Tatura Methodist Church c.1910methodist church, photograph, people

Tatura Cricket Team c.1920tatura cricket team c1920, cricket team, photograph, people