Showing 142 items
matching electrical supply
-
Ballarat Tramway Museum
Manual - The Melbourne Electric Supply Co. Service and Wiring Rules, Melbourne Electric Supply Co. (MESCo), 1918
The Melbourne Electric Supply Co. operated a Power Station in Richmond and provided power to the Prahran and Malvern Tramways Trust and the Hawthorn Tramways Trust. They also provided power to Geelong and operated the Geelong Tramway system. MESCo Geelong and Richmond operations were taken over the SECV in 1930. The book gives the requirements for wiring of building and switchboard. Yields information on the electrical requirements that electricians were required to work to where MESCo supplied electricity. It would have been used in the development of the SEC rules. Has a strong association with one of the MESCo Electrical Inspectors.Book - The Melbourne Electric Supply Co. Service and Wiring Rules - 64 pages, centre stapled, dark fawn covers. Provides rules for the Melbourne (Richmond) and Geelong undertakings. Dated 1/4/1918. Has a number of printed updates pasted into the book along with a typed and hand witten note. Price 6d. Has an index.Some hand written notes on the various clauses. Has the stamp of "Electric Inspector" in the top right hand corner. Numerous marks of red and blue pencil to high light specific clauses.rules, wiring, electrical, regulations, mesco, geelong, tramways -
Ballarat Tramway Museum
Document - Instruction, Melbourne Electric Supply Co. (MESCo), " Geelong Tramways July 1924 Instructions to Motormen in Charge of Birney Safety Cars", 14/08/1924 12:00:00 AM
Demonstrates and instruction issued by the operator of the Geelong tramways (MESCo) at the time of the introduction of the new Birney Safety car, which allowed one man operation of trams. Gives details of the operating procedures of the tram.Two page typed foolscap document titled " Geelong Tramways July 1924 Instructions to Motormen in Charge of Birney Safety Cars" and dated 14-8-1924. Gives simple instructions on the Birney Safety Cars which were new to Geelong at the time. Includes notes electrical and air systems, procedures for running out, passenger capacity (max 60), testing equipment and running in. Original was pinned together in top left hand corner.In top right hand corner in ink "BTPS 401"trams, tramways, birney, geelong, instructions, safety -
Ballarat Tramway Museum
Document - Instruction, Melbourne Electric Supply Co. (MESCo), "Questions to be answered by Birney Car Students", 1/08/1924 12:00:00 AM
Yields information about the training of crews.Instruction or question sheet - foolscap carbon copy, titled "Questions to be answered by Birney Car Students", giving 18 questions, about electrical path, controllers, lighting, stopping the tram, faults, sand, leaving the tram, draw bar, purpose of the two trolley poles. Two copies - one copy dated 15/8/19245 - suggesting it was made for Geelong by MESCotrams, tramways, birney, mesco, instructions, training -
Ballarat Tramway Museum
Photograph - Geelong Tram Depot, Melbourne Electric Supply Co. (MESCo), 1911
... , and trucks supplied by the Brush Electrical Engineering Company..., and trucks supplied by the Brush Electrical Engineering Company ...Completed depot shed with trams being assembled from parts railed to Geelong from Duncan and Fraser, coachbuilders, Adelaide, and trucks supplied by the Brush Electrical Engineering Company of Loughborough, England. Chimney to the left is part of the Melbourne Electric Supply Company's coal-fired power station at the SW corner of Corio Tce. and Yarra St. 1911Yields information on the early development of Geelong Tramways infrastructure.Black and white print on paper.Plate 3-1 Spare written in ink on the back of the photograph.geelong tramway depot shed, tramway assembly, duncan and fraser coachbuilders, brush electrical engineering company, geelong mesco power station -
Wodonga & District Historical Society Inc
Domestic object - Kerosene Lamp, early 20th Century
... throughout Australia prior to the supply of domestic electrical... throughout Australia prior to the supply of domestic electrical ...Kerosene lamps were used as a main source of lighting throughout Australia prior to the supply of domestic electrical services. This was obviously later in many rural areas. This lamp was used in the home of Mrs. Laura Flower nee Sommer wife of Mr. Stanley Flower of Wodonga.This lamp is representative of the lamps used throughout Australia prior to the introduction of domestic electricity supplies. It was used in the home of a Wodonga resident.This item has a cast iron base in a pyramidal shape with the four sides having an identical leaf and flower design. A piece of brass attaches the base to a clear glass bowl. The bowl contains a white wick. The brass wick holder has an external knob for regulating the light intensity. There is more brass between the bowl and the mantle which is made of plain glass.Inside the base of the lamp: an Rd No which is uncleardomestic appliances, kerosene lamp -
Ballarat Tramway Museum
Photograph - Geelong Tram Depot, Melbourne Electric Supply Co. (MESCo), c.1910
... , and trucks supplied by the Brush Electrical Engineering Company..., and trucks supplied by the Brush Electrical Engineering Company ...Completed depot shed with trams being assembled from parts railed to Geelong from Duncan and Fraser, coachbuilders, Adelaide, and trucks supplied by the Brush Electrical Engineering Company of Loughborough, England. Chimney to the left is part of the Melbourne Electric Supply Company's coal-fired power station at the SW corner of Corio Tce. and Yarra St. 1911Yields information regarding the early development of tramway infrastructure in Geelong.Black and white print on paperPlate 3-2 Spare written in ink on the back of the photograph.geelong tramway depot shed, duncan and fraser, brush electrical engineering company, mesco power station -
Ballarat Tramway Museum
Document - Form/s, State Electricity Commission of Victoria (SECV), "Motorman - Conductor's Daily Report as to Condition of Car", c1942
Yields information about the layout and detail of the form used by crews to report defects. Significance reduced as to missing portion and damage.Form - SEC Electricity Supply Department, form number TYE 1 - 13, titled "Motorman - Conductor's Daily Report as to Condition of Car", listing details of the use of the car and lists electrical equipment and car body -not complete and no signature block. Has been torn in half, Completed for 10-10-1942 for use of No. 14 between Lydiard St and the City. On the rear are sketches for the field coils of a motortrams, tramways, tramcar components, forms, motormen, conductors, tramcars, records, sec -
Bacchus Marsh & District Historical Society
Radio, Marshman Music Master, Ca 1946-1950
This radio set was designed and manufactured in Bacchus Marsh from 1946 and into the 1950s. In 1946 a local company Arbee Supply Co Pty Ltd acquired from Mr. R. C. Butler the business of wholesale and retail distributors of electrical goods carried on by him for some years at Bacchus Marsh. The company manufactured at Bacchus Marsh Marshman radio and electrical equipment for a number of years.A relatively rare example of a locally designed and produced new consumer technology product. Bakelite tabletop radio, small box, camel-coloured leatherette covered, glass front, three dialsIn blue print "MARSHMAN MUSIC MASTER" radios, manufacturing industries -
Bendigo Historical Society Inc.
Photograph - BASIL MILLER COLLECTION: PRESIDENTS CONFERENCE CAR LABEL
Handwritten in blue pen on the reverse of Electricity Supply Department Tram Mileage Record, 'Introducing the Presidents Conference Car Silent in Running Magnetic and Electrical Braking'.basil miller, bendigo trams -
Melbourne Tram Museum
Book, The Electrical Review Limited, "The Electric Tramcar Handbook", 1920
Book titled "The Electric Tramcar Handbook" written by W.A. Agnew. Book has dark red cloth covers, gold block titled on front only, with tipped in end papers, title page, contents pages, three introductory pages by author, 127 pages of text, five index pages and six folded sheets interspersed in book with wiring or controller diagrams. Book finished with red tinted edging. Book published by The Electrical Review Limited, London in 1920, 8th edition. On the inside front cover has the stamp of the Australian Electric Traction Association and office stamp of "The Melbourne Electric Supply Company Limited" which has been crossed out. Primary contents chapters include: The Electric Circuit Electric Tramways Electric Tramcars Controllers Brakes On the Road Faults and Breakdowns.See images i2 and i3 showing notes and AETA stamp and MESCo stamp.trams, tramways, tramcars, tramways, technical books, handbooks, mesco -
Melbourne Tram Museum
Document - Report, Willits H. Sawyer, "Report on the Status and Affairs of the State Electricity Commission of Victoria", 1926
Report - 32 pages centre stapled, printed on foolscap paper, has an index (see image i2), report of the Royal Commissioner Sawyer titled "Report on the Status and Affairs of the State Electricity Commission of Victoria and the scope and working of the State Electricity Commission Acts". Looks at the financial situation of the Commission, its management, equipment, power supply systems, Newport, technical issues, hydro power stations, Yallourn, problems with brown coal, use of Richmond Power station Signed by author on rear page. Note: At the time of cataloguing very little found on Mr. W. Sawyer - see reference in Trove for meeting with Sir John Monash - http://trove.nla.gov.au/newspaper/article/3737172/446386 and International Electrical Engineers - http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=5217646, that he died 1/3/1966, age 93 - had been associated with Electric Street Railway companies, the Railway Engineering Department of General Electric and the firm Ford Bacon and Davis in New York City. For scan of full document see htd2104i3.pdf - downloaded from the Parliamentary web site - 29/7/2018.In the top right hand sector "J.P.S. just to let you know that I have appreciated your many courtesies and kindnesses HHS - 28/5/26". On rear page, has been signed by Willits H. Sawyer.trams, tramways, secv, power supply, royal commission, newport power station, richmond power station -
Melbourne Tram Museum
Document - Report, Melbourne & Metropolitan Tramways Board (MMTB), "Modern tramcar with PCC Equipment", 24/07/1950 12:00:00 AM
Report - 3 foolscap typed sheets, titled , dated 24 July 1950. Document details the PCC tram for an article describing in detail the tram, the seating, floor, ceiling, strap hangers, PCC equipment, supplied St Louis Car Company, bogies, electrical equipment, controllers, general description, equipment compartments, doors, trolley pole and a list of principal dimensions. Signed A. Stephenson 24/7/50.trams, tramways, pcc, new trams, manufacturing, licence fees, agreements, bogies, controllers -
Melbourne Tram Museum
Photograph - Black & White Photograph/s, c1940
Photo of Harry Parris, who became the MMTB Distribution Engineer late 1940s. Scanned from a supplied print of A4 size. Part of the file loaned to the Museum for scanning - details some of the history of Harry's qualifications and work with the MMTB. See htd4574doc for a list of the file contents provided by Peter Hogan.trams, tramways, mmtb, electrical engineering, mmtb, engineers, personnel -
Melbourne Tram Museum
Legal record, Christie & Gardiner, Consulting Engineer', "Contract between Footscray Tramway Trust and The Australian General Electric, 31/07/1919 12:00:00 AM
Set of documents sewn within a green folder titled "Contract between The Chairman and Members of the Footscray Tramway Trust and The Australian General Electric Co. Queen St Melbourne for the supply, delivery and Erection of Rotary Converters, Transformers and Switchgear for the Footscray Tramway Trust" containing: 1 - "Footscray Tramways Trust - General Conditions, Specifications and Forms for Tendering - Tender for the Supply Delivery and Erection of Rotary Converters, Transformers and Switchgear", Schedule of Prices, Tender Form, Schedule of documents, contract dated 31/7/1919, includes the seal of the FTT and copies of some 10 letters clarifying matters between the time of the tender and documentation. Documents have been signed and sealed. See page 5 bottom right hand corner for the FTT Seal. Documents prepared by Christie & Gardiner, Consulting Engineers, 97 Queen St Melbourne. Parts of the document have scanned to pdf.Has in pencil in the top right hand corner "49"trams, tramways, ftt, footscray, rotary converters, electrical engineering, electrical equipment, tenders, contracts -
Melbourne Tram Museum
Book, Eugene C Parham, John C Shedd, "Miscellaneous Tests on Car Equipment", 1910
Book - 170 pages, 10 sections sewn and bound into heavy green card covers cloth covered with glued end pages. Title "Miscellaneous Tests on Car Equipment" for electric street car or trams written by Eugene C Parham and John C Shedd, published by McGraw Hill Book Co. of New York, dated 1910. Has a table of contents, index at the rear, and index of Rules for determining sizes of electrical equipment and tramcar horsepower and kilowatts, traction and speeds. Cover sheets, table of contents and indexes scanned to a pdf file.In a number of places "The Electric Supply Company of Victoria Limited" stamped throughout the book.trams, tramways, electrical engineering, electrical equipment, tramcars, maintenance, motors -
Melbourne Tram Museum
Document - Instruction Book, Melbourne & Metropolitan Tramways Board (MMTB), "Electrical Distribution Branch - Instructions and Regulations", mid 1920's
Instruction book - dark red Rexene covers + 26 pages + 1 sheet which has been added after original publication, sewn with cotton thread into cover which was printed with gold blocking - titled "Electrical Distribution Branch - Instructions and Regulations". Page corners have been rounded. Produced by the MMTB Chief Engineer's Dept, mid 1920's? Provides guidance, rules, instructions for distribution employees in the management of sub-stations, safety. Includes reference to specific employees in the instructions and on the rear page has a single line diagram of Connections for Tramways Board supply from Angliss to Tramways Substation. Angliss was provided with power from, the VR Railways 20000V bus and has specific instructions in the document. Includes reference to Carlton Control. Document issued under the order of T.P. Strickland as Chief Engineer and has been issued to J. F. S. Phiddian - a shift electrician.trams, tramways, electrical engineering, electrical switching, electrical systems, substation, mmtb, instructions, footscray, tower wagon, vr -
Melbourne Tram Museum
Book, David Keenan, "Melbourne's Tramways", 1985
Book - 84 pages black and white on gloss paper + colour card covers, centre stapled, titled "Melbourne's Tramways", written by David Keenan, published by Transit Press's in 1985. Gives an overview of the Melbourne, tramway development, the system itself including operation, fares, tickets, crew training, tramcars and their maintenance, track, power supply, tram routes, depots and allocation at the time. Has maps of the system, Preston workshops, depots, tramway track types, electrical system and services details of routes, running times and service frequencies along with many photographs. Includes photos of emergencies, track work and other aspects of the system in 1984. 'Has a sticker in the top right hand corner "TDO $12.00"trams, tramways, melbourne, tramways, history, trackwork, depots, fares, tickets, training, tram routes, tramcars, maintenance, power supply, maps, operations -
Melbourne Tram Museum
Letter - From HTT to PMTT re welding of bonds, McCarty Underwood & Co, 24/2/1916
Letter dated 24/2/1916 from F A McCarty HTT Engineer and Manager to Jas R Henderson, Construction Engineer PMTT about the supply and possibly welding the bonds between track joints to ensure electrical continuity.Has a close association with the two engineers named and their correspondence re working.Letter typed on HTT letterhead watermarked - "Sovereign Ultra Strong" and "British Made"tramways, htt, pmtt, electrical engineering, track work. -
Melbourne Tram Museum
Document - Specification - set of 3 - Air Compressors and equipment, Melbourne & Metropolitan Tramways Board (MMTB), mid 1950s
Three documents for the purchase of air compressors and associated equipment 1 - "Three (3) engine-driven portable air compressors" - 11 sheets, undated 2 - "Five (5) electrically driven portable air compressors" - 9 sheets + small sheet - undated - draft with handwritten notes. 3 - "Supply and delivery of pneumatic tools" - 6 sheets with handwritten notes.Yields information about the MMTB tender for pneumatic equipment.Set of three documents - foolscap sheets stapled in top left hand corner and hole punched along the top edge.mmtb, tramways, contracts, purchases, trackwork, tools, air compressors -
Melbourne Tram Museum
Booklet, Melbourne & Metropolitan Tramways Board (MMTB), "Statistical Information re Electric Services", June 1955
Booklet titled "Statistical Information re Electric Services" - dated June 1955, providing details of the MMTB tram system, tramcars, tramcar description, wheels and brakes, electricity supply, per way or track, and East Preston Depot. It would have been issued at the time of the opening of the Bourke St lines. There are number of corrections marked in the booklet in ink.Demonstrates a MMTB publication giving statistics of the tramway system in 1955. Booklet - manila card covers, stapled on left hand side containing 6 duplicated sheets. Two copies held.m&mtb, statistics, track, electrical engineering, overhead, tramcars, wheels, brakes, east preston depot -
Victorian Railway History Library
Booklet, Australian Electrical Industries Pty Ltd, Metropolitan Vickers 46 Class Co+Co Electric Locomotive, 1956
... for the New South Wales Railways supplied by Australian Electrical ...A brochure describing the new 46 class co-co electric locomotive from Metropolitan Vickers for the New South Wales Railways supplied by Australian Electrical Industries Pty Ltd.ill, p.8.non-fictionA brochure describing the new 46 class co-co electric locomotive from Metropolitan Vickers for the New South Wales Railways supplied by Australian Electrical Industries Pty Ltd.electric locomotives - new south wales - history, electric trains - australia- history -
Ballarat Tramway Museum
Newspaper, The Courier Ballarat, "No review of SEC Tariffs while trams stay", 3-1-1963
Newspaper cutting from The Courier, 3-1-1963 titled "No review of SEC Tariffs while trams stay", about there will be no reduction in power tariffs in the region while the Ballarat trams continue to operate. Gives details on additional customers in the region, tariffs were reduced in Geelong after the closure of trams there. Quotes the Minister of Electrical Undertakings, Mr. Reid, following Murray Byrne, MLC.Yields information about the cost of power in the Ballarat area.Newspaper cutting from The Courier, Ballarat, taped to a quarto sheet with rounded corners.In ink "Courier 3/1/63"secv, ballarat, trams, tramways, closure, power supply, power costs