Small Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, htt

coated metal with painted surfaceReturned Sailors & (reverse) Soldiers Imperial League Australia 1918.(front) 53212 & Stokes and sons Melbourne (reverse)

This cable tram Gripman’s badge, or driver’s badge, was part of a tram driver’s uniform. The inscriptions on the front of the badge identify it as belonging to Gripman number 14, at the South Melbourne Car House depot of the Tramways Board. The Gripman Badge would be re-issued whenever another Gripman takes over the position. Cable trams were invented in America in 1873. In Melbourne, cable trams were in use from 1885 until 1940, with a network of up to 1200 cable cars or 'dummies' and trailers travelling at around 9.5 miles (15km) per hour along 46 miles (74km) of double tracks. The Gripman drove the dummy car, operating the heavy levers to connect the gripping gears to the cable installed in a slot in the road. To turn at intersections he would skilfully disconnect, freewheel around the corner and carefully reconnect to the continuously operating steel cable. Large winding gears in an Engine House along the line pulled the cable along, powered by steam engines and later electric engines. The gripping gears were in the centre of the car's floor with seating all around the sides, a dangerous place for curious children. , whose worried parents would guide them into the tram that was towed behind the dummy car. The Melbourne Tramways Board operated the cable trams between July 1916 and November 1919 after taking over from the privately operated Melbourne Tramway and Omnibus Company. In 1919, the Melbourne and Metropolitan Tramways Board (MMTB) took over the Tramways Board. Stokes & Sons: - The maker of the badge, Thomas Stokes, migrated to Melbourne from Birmingham in 1854 and set up business in Mincer Lane as a die-sinker, producing medals, tokens, buttons and silverware, and an engraving service. He moved to Flinders Lane in 1856. After a time, in 1894, the business became Stokes & Sons Pty: Ltd, electroplates and badge makers at Post Office Place in Melbourne. The maker's mark 'Stokes & Sons' was made on badges until 1962. LOCAL CONNECTION: -t was common practice to recycle the used cables from the tramway. For example, the Wollaston Bridge in Warrnambool, Victoria, is suspended by recycled cable tram Melbourne. (Other recycled cables were used for fencing wire.) -Portland's cable tram is an example of the cable trams used in Melbourne from 1885 to 1940.This badge was used to identify a Gripman who operated a cable car tram's dummy car for the Tramways Board in Melbourne between 1916 and 1919. It represents the need for people to be able to identify workers in the service industry, a need still addressed today by staff ID badges and digital identification. The badge also represents the period in Melbourne's history when cable cars were used for public transport for over four decades, gradually changing from steam to electric power. Trams still have an important role in Melbourne's public transport. Badge, round hollow metal dome with two open metal guides on the back. A cable tram Gripman (driver) badge with embossed inscriptions on the front and stamped on the back. There is a logo of entwined letters T and B on the front. It identifies Gripman number 14, South Melbourne, Tramway Board. It was made by Stokes & Sons of Melbourne. Impressed into the front: "S / 14 / M" "GRIPMAN" Logo intertwined "T" and "B" Embossed on reverse "STOKES &o SONS"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, badge, gripman, stokes & sons, numesmatics, tramway, tram, tram driver, uniform, cable tram, identification, cable car driver, tramway board, south melbourne, melbourne tramways board, tb, mtb, mmtb, melbourne and metropolitan tramways board, tramway button, gripman button, id, identification badg, staff badge, name badge, employee, grip car, dummy car

Historical information: this medallion has historical details on three fronts. Firstly the Villiers & Heytesbury Agricultural Association. This association began with the first meeting held on May 17th 1853 at Woodford. The minutes of that meeting read “That in the opinion of this meeting, the formation of an agricultural association would be of great benefit to persons in this district engaged in farming and pastoral pursuits. It initially embraced the following: ploughing, agricultural produce, machines and implements, and livestock of all descriptions. The first show was held at Warrnambool on April 10th 1855 on a green bounded by Fairy, Henna, and Koroit Streets. It was held there until 1875 when it moved to the present Showgrounds site in Koroit Street. At the 37th Annual show in 1890 Warrnambool held its first Grand National Show, being granted by the Chamber of Agriculture in turn, in Victoria. It became known as the Warrnambool Agricultural Society in 1911. Secondly the winner, Mr Hugh Lennon. He was one of the most successful innovators and manufacturers of agricultural implements in early Australia. Although born in Ireland, he served an apprenticeship in Scotland in mechanical engineering. The Lennon plough became known Australia wide. For many years he operated his business at the northern of Elizabeth Street in Melbourne. He was active in local affairs. He died in 1886 at the age of 52. Thirdly, Stokes and Martin. Thomas Stokes came to Australia in the 1850’s and established a successful business at Mincing Lane Melbourne, manufacturing buttons, medals and tokens. Martin joined the partnership in 1873, which lasted until a disastrous fire in 1893. The business was renamed Stokes & Sons Pty Ltd and it became a public company in 1962. It is currently situated at Ringwood in the business of spare parts for electrical equipment The Villiers and Heytesbury Agricultural Association was a significant event and organisation within the Western District over a large number of years. It was one of the earliest organisations in the district and is testament to its importance to the agricultural, social, and cultural life of the district. It is significant that this particular medallion was awarded to an innovator in the ploughing industry and that it was made by a company which is still in business 130 years later. Circular copper medallion cast with Villiers & Heytesbury Agricultural Assoctn around edge with winner and event details engraved in centre. The reverse is cast with horse, cow and sheep standing above wheat sheaf and farm implements. The edge of the medallion is plain.Villiers & Heytesbury Agricultl Assoctn around rim. 1st Prize awarded to Hugh Lennon for double furrow plough, Warrnambool Oct 19 1880. Stokes & Martin Melbourne in small lettering on the reverse.warrnambool, villiers & heytesbury, hugh lennon, stokes & martin, lennon plow, lennon plough

badgeAustralian coat of arms, munitions worker, Australia, issued by Department of Defence (reverse),Stokes and Sons Melbourne (reverse), 357munitions worker badge, metal

Part of the Cooper Collection.Collection of three large and twelve small copper coloured army uniform buttons. Each features a raised map of 'Australia below a Kings Crown. Word 'Australian Military Forces' written around the edge of each button. metal loop on the back of each for attaching to a ubniform.Various Manufacturers names stamped on back: AJ. PARKES, BRISBANE STOKES & SONS, MELBOURNE J.R. GAUNT & SON LD, LONDON P.J. KING PRY LTD, MELBOURNE, K.G. LUKE PTY LTDcooper collection, buttons, uniform, australian military forces

These medals were issued to Returned Discharged Soldiers. The Medals were first issued in 1916, to approximately 267,300 personnel. There were medal makers for each state this medal was produced by Stokes & Son, Melbourne, thus made and issued in Victoria. As the medals were issued a record of issue to recipient was kept - however it was not follow the logic that the No 1 badge went to the first person discharged.This Badge was issued to a Returned Soldier of the AIF.A bronze colour round badge.A crown, a rising sun with AIF printed underneath, printed around the edge of the badge - Issued by Dept of Defence, Returned from Active Service.badge, aif, discharged returned soldier badge

items in collection relating to the JACKSON Family..1) - .3) Three buttons, two silver one brown all Australian. .4) One Officers rank badge pressed metal. .5) Button gold coloured with American Eagle on..1) - .3) Brown button on rear, "P.J.King PTY LTD". Silver button, "Stokes and Son Melbourne" .5) On rear, "VAM"badges, buttons

"A limited number of Centenary Medallions designed by Mr. V. Greenhalgh were produced by Stokes & Son, Melbourne to commemorate the Centenary of the School. The medallion was produced from copper base metal with a silver oxide finish and has been well received by past student, present students, staff members and the general public. A quantity of 50 medallions have been reserved for presentation purposes on special occasions."26 silver medals in a black hinged box. The medal struck for the Ballarat School of Mines centenary. . The School of Mines and Industries Ballarat 1870-1870 Verso Ingenio Effodere Opes A Centenary of Educaiton in Technology Science & Art ballarat school of mines centenary medal, centenary, anniversary, victor greenhalgh, stokes & son, medallion

"A limited number of Centenary Medallions designed by Mr. V. Greenhalgh were produced by Stokes & Son, Melbourne to commemorate the Centenary of the School. The medallion was produced from copper base metal with a silver oxide finish and has been well received by past student, present students, staff members and the general public. A quantity of 50 medallions have been reserved for presentation purposes on special occasions."Medal struck for the Ballarat School of Mines centenary. .1) Two framed centenary medals, showing both sides of the medal .2) Sterling silver medal in a black hinged box. .3) Booklet listing receipients of Centenary Medallion .1) Presented to Professor Geoffrey Blainey, AO Guest Speaker Founders Day 26 October 1995"ballarat school of mines centenary medal, centenary, anniversary, victor greenhalgh, geoffrey blainey, stokes & son, e.j. barker, g. biddington, e.j. tippett, sir paul hasluck, l.j.f. hillman, miss b. archdale, sir douglas menzies, h.j trudinger, m.b. john, b.r. hames, v. grennhalgh, r.w. richards, a. senior, j. clark, n. crouch, h. dixon, p. law, nigel bowen, peter lees, mrs j. lawn, dr. j birrell, d. kellock, g. dixon, john baker, k. kelly, w. anderson, w titteridge, a.e. stohr, r. chambers, g. smith, m.g. beanland, j.v. robertson, v. white, mrs m. scott, r cairns, p. zass, j. england, h. sienering, i.g. whitcher, v. lisle, edith lawn, dr stephen murray smith

Button - brass - The MTA (Metropolitan Transit Authority) of The Met logo with a raised metal finish - made by Stokes and Sons Melbourne - approx. 23mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, the met, mta

Used by the MMTB to indicate to Inspectors and the public, the driver or conductor traffic number or their personnel number. This number would appear on all reporting documents.Demonstrates a MMTB employee or traffic number badge.Badge number, MMTB style, "1469", plated brass to give a gold finish, with the numbers fixed to a bar top and bottom and two lugs on the rear to clip into a cap. Made by Stokes and Sons Melbourne - has been stamped onto the rear. Has one of the lugs missing. tramways, trams, mmtb, operations, badges, crews, drivers, conductors, personnel, employees

Manufactured for the Hawthorn Tramways Trust for use on Uniform Jackets and Great Coats. Demonstrates a button made for the HTT Set of four Coat buttons for the Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and has the name of the manufacturer stamped on the rear part. See item 581 for another example, smaller in diameter. tramways, trams, badges, uniforms, hawthorn, htt, buttons

Set of three coat buttons: 1 - Small Prahran and Malvern Tramways Trust - PMTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. 2 - Large PMTT - heavily worn - made by Stokes and Sons Melbourne - approx. 26mm dia - missing lug. 3 - MMTB button or Badge - damaged - made by Buttons of Birmingham UK - approx. 25mm dia. Each button has a backing piece on rear with a lug (except for 2) for sewing onto a jacket and have name of manufacturer stamped on rear part. "Buttons Ltd" of Birmingham, England has their trade mark, a pair of fully opened scissors.trams, tramways, mmtb, melbourne tramways, uniforms, buttons, pmtt

To mark the diamond jubilee of Queen Victoria reigning as the monarchy for 60 years. She died four years later in 1901. These medals were mass produces by Stokes & Sons of Melbourne, many of the local government bodies had them made.Marking the 60 years that Queen Victoria was on the throne. A round medal with a young and older faced Queen Victoria on one side. And on the other side is the Shire of Ballarat 's "Coat of Arm". This medal was issued by the Ballarat Shire as did many of the local government bodiesThe two faces of Queen Victoria, one as a young woman, the other later in life with the words, "QUEEN VICTORIA'S 60th YEAR OF REIGN. 1837 TO 1897". On the front. On the back is written "SHIRE OF BALLARAT. E.BUTLER. PRESIDENT". Also there is the Ballarat Shire "Coat of Arms", written underneath is the words "BY THESE WE FLOURISH".queen victoria, shire of ballarat, diamond jubilee

Used by the MMTB to indicate to Inspectors and the public, the driver or conductor traffic number or their personnel number. This number would appear on all reporting documents.Demonstrates a MMTB employee or traffic number badge.Set of two badges - numbered, "2116" and "2119", nickel plated brass to give a silver finish, with the numbers fixed to a bar top and bottom and two lugs on the rear to clip into a cap. Have been mounted onto a card with the clips used in practice. Made by Stokes and Sons Melbourne - has been stamped onto the rear. tramways, trams, mmtb, operations, badges, crews, drivers, conductors, personnel, employees

Each button has the logo of the Melbourne Tramway and Omnibus Co. pressed into the front of the badge - a M interwoven with a T. All made by Stokes and Sons of Melbourne. Worn by Cable Tram employeesDemonstrates buttons worn by the MTOCo staff.Set of five MTOCo coat buttons fitted with hooks - nickel plated brass - 3 large coat, 2 small sleeve or cap.trams, tramways, cable trams, mto co, buttons, uniforms

These medals were produced for Anzac Day 1918 by the Education Department of Victoria and made by the Melbourne firm, Stokes and Son. They were issued to Victorian school children and also sold to aid the war effort. These medals have no particular local provenance but are retained for display purposes..1 A silver-coloured metal medal with an image of an A.I F. soldier and printed words on the obverse side and a banner and decorative leaves and printed words on the reverse side. The medal has a metal circular piece at the top for attachment to a ribbon or cord. .2 as above except that the medal is bronze-coloured. EDV Gallipoli France Palestine Anzac Day 1918 Honor to the AIF S & S world war one, history of warrnambool, anzac day

Set of seven nickel silver MMTB Coat buttons and two brass. Buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne. The badge backing piece is nickel silver or brass. They are fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Three of the Stokes and Sons badges have one two small hole,trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Use to identify a tramway employee - a trackman - Track maintainer. Would have allowed free travel when on duty and to and from work. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921 or when a different identification system was implemented. Made by Stokes and Sons Melbourne.Demonstrates the method of identifying cable tram employees. Round pressed brass badge with the words "Trackman" and number "240" pressed into the centre of the badge around the top half of the badge "All Lines" with small horizontal lines within the individual letters. Has the Tramways Board logo on the lower part of the badge. On the rear of the badge, two metal lugs have been soldered onto the badge and a single-piece leather strap with a buttonhole cut into it to enable it to be worn on a uniform. The leather strap appears to have been refitted at one stage - marks on rear from previous straps. badges, tramways, trams, employee pass, tramway board, track cleaner, track maintenance

This medallion was awarded by the Commissioners of the Warrnambool Industrial & Art Exhibition to ten boys from the Kew Asylum who sent handmade items (basketware, matwork etc ) for display at the Education Court of the Exhibition. The Warrnambool Industrial & Art Exhibition, held in Warrnambool from December 1896 to March 1897, partly to commemorate Queen Victoria's Diamond Jubilee, was a signal event in Warrnambool's history, with one report suggesting that over 70,000 people attended the various activities held over these months. These included concerts, operas, displays, business stands, sporting events and competitions. The earliest surviving voice recordings made in Australia were produced in Warrnambool at this Exhibition and there were various other 'firsts'. The medallion awarded to the boys at the Asylum for the high quality of their work, was made by the Melboune firm of Stokes and Sons who had a stall and machinery at the Exhibition and made small souvenir Exhibition coins on the spot for visitors to buy. As well as the gold medallion the boys were also given by the Commissioners some small souvenirs to the total value of 12 shillings. This medallion is of great historical value as it is a precious and rare memento of the 1896-7 Warrnambool Industrial & Art Exhibition, an important event in Warrnambool's history..1 A round gilt-bronze medallion with a bust image of Queen Victoria and lettering on one side and a laurel wreath and lettering on the other side .2 A square black box with a metal hinge and clasp. The inside is lined with dark blue satin and silk and has a sunken area to hold a medallion. The maker's name is printed in gold lettering on the inside top of the lid.Warrnambool Industrial & Art Exhibition 1896-7 Diamond Jubilee Awarded to Idiot Asylum Kew For excellence of Workmanship Basket & Matwork & Photos of Asylum Stokes & Sons Medallists Melbournewarrnambool industrial & art exhibition, kew asylum medallion, medallion, 19th c exhibition warrnambool, warrnambool, warrnambool history

The medallion states that Patrick O. Sullivan arrived in Victorian in 1854. Patrick Sullivan arrived on the “Violet” in 1854. (PROV, Book 10 pp425.) The silver medals for members were created by Stokes and Martin, of Melbourne in 1988. Photograph of a medal associated with the Old Colonists' Association Ballarat. Hand engraved into the medal is "Patrick O. Sullivan arrived Melbourne 1854"patrick o'sullivan, patrick sullivan, patrick o. sullivan, numismatics, old colonists' association, ballarat, immigration

Silver medallion with inscription featuring image of the city of Melbourne verso is blank. Sits in black box with black felt.on medallion: "SPORT/ MUSIC/ ART/ DRAMA/ CARNIVAL/ LITERATURE/ MELBOURNE MOOMBA FESTIVAL" "PMA 0279/1" on box: "STOKES (A'ASIA) LTD, MELBOURNE AUSTRALIA/ ESTB. 1856" "PMA 0279/2"

Set of eight small silver MMTB Coat buttons with brass backs and hooks. Five of the buttons (approx. 16mm dia) are made by Stokes and Sons Melbourne and three by Buttons of Birmingham UK One of the button has a metal clip in the rear. Four large, one brass finished and three nickel silver buttons, 23mm dia. with brass backs and hooks. Two by Stokes and Sons and two by Buttons of Birmingham.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in gold finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "91" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ See Reg Item 395 for another example.trams, tramways, badges, inspectors, mmtb

Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in silver finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "5" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES & SONS MELBOURNE" stamped into . Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat.\ Badge was used by the Donor as part of his work uniform. See Reg Item 6010 for another example.trams, tramways, badges, inspectors, mmtb

Set of two tram crew number badges, used by MMTB drivers and conductors or other uniformed employees. .1 - "08" - made from two cast numbers fixed to a bar top and bottom - may have been part of a larger item, given to the left hand side of the item. Made by Stokes and Sons Melbourne. .2 - "3" - made from brass, gold plated? Has two small clips on the rear and fitted with two clips for fitting to a uniform.trams, tramways, mmtb, badges, crews, drivers, conductors, personnel

This is an original policeman’s helmet, known as a ‘Wolsley’. The design was in use by Victoria Police from 1877 to 1947 then replaced by more suitable caps. The helmets were made in Ballarat by the Victoria Police's official supplier, A W Sudweeks. Some of these helmets were re-sold at Stokes and Sons in Melbourne and would carry that company’s name. This Victoria Police helmet represents an early era in its uniforms, from 1877 to 1947, when the design was based on the English versions. The design was later replaced by head wear that better suited the local climate and conditions. Helmets of a similar shape to this one were worn by the local Volunteer Corps.Policeman’s helmet, Victoria Police. The black, stiffened canvas hat has a high crown and a leather chin strap. The five panels of stiffened canvas are stitched together. The helmet has a metal ventilation dome at the top. The two small holes at the front are for the officer’s identification badge. The helmet has a leather sweatband, and the brim and sweatband are lined with beige fabric. The helmet’s brim is wider at the front. A maker’s label in the shape of a shield is attached inside the helmet, which is made by A.W. Sudweeks of Ballarat. "A. W. SUDWEEKS / MANUFACTURER / BALLARAT"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, police, victoria police, police uniform, policeman's hat, helmet, policeman's helmet, wolsley, law and order, victorian government, bobby, stokes and sons, official supplier, government supplier, a w sudweeks, ballarat