Used in Horse tackle during 19th and 20th century by Holden and FrostImported and used by Holden and Frost Circa 1900Square shaped Link as used by Holden and Frost in Equine strappingequine military, civilian, agriculture ca1900, buckle

Used on horse tackle during the 19th and 20th centuries for military useRetailed by Holden and Frost for military use during c1910Nickel plated military horse bitequine, military, civilian ca1900, horse bit

Owned and used by the late Mr W.T. Sebire 1900. The frame was rebuilt by Russell Sebire.A large sandstone grinding stone disc with a pale blue wooden frame and metal turning handle/ It was used for sharpening tools such as axes in the late 19th or early 20th Century. grinding stones, sandstone, equipment, sharpeners, sharpening stones, steel, wood

This map shows the plans by eminent harbour engineer, Sir John Coode in 1879. Construction of the breakwater commenced in 1884 and was completed in 1890. Coode first visited Australia in 1872 when he commenced work with the Melbourne Harbour Trust to report on ways to improve Melbourne Port. He is considered one of the most eminent harbour engineers of the 19th century. His original plans for Warrnambool were revised because of cost but then subsequently found to be inadequate and later extended. This was not successful either and the harbour continues to have silting problems to this day. The Warrnambool Breakwater is of historical importance to Victoria and as this map depicts the original plans, it too has great historical significance. It is also significant with its association with Sir John Coode, who was one of the most important port engineers of the 19th century. He worked to improve ports along the Victorian coast including Portland, Geelong, Port Fairy and Lakes Entrance. While this map demonstrates the engineering skills of the era, it also reflects the limitations when natural elements are involved. Its Historical importance also lies in the depiction of items on the map which relate to Warrnambool’s early history. Paper on linen map coloured, and depicting the harbour area of Warrnambool with the proposed breakwater plan in red. It has Victorian Harbours information in oval at top of map. It shows depths of some areas.In oval at top, “Victorian Harbours Warrnambool plan to accompany Sir John Coode report dated 28th Feb 1879. Drawing No 2. Scale 500 feet to 1 inch at bottom centre. Sir John Coode signature in bottom left corner. A 33 A on bottom left reversesir john goode, warrnambool harbour map, warrnambool harbour map 1879, port of warrnambool map 1879

This book was given in 1929 to Alma McCullagh by the Dennington Sabbath (Sunday) School with the teacher being R. Conn. The Dennington Presbyterian Church was originally established in Drummond Street in 1918. In 1951 it was moved to Lindsay Street and demolished in 1968. R. Conn may be Ruby Conn who was born in Warrnambool in 1890 to Joseph and Ann Conn. Joseph Conn was a blacksmith from Illowa in the late 19th century (today in that area we have Conn’s Corner and Conn’s Lane). The McCullagh family had a property in Yangery named Oak Grove.This book is of interest because of the 1920s connection to the Dennington Presbyterian Church, the Conn family and the McCullagh families.This is a hard cover book of 256 pages. The cover is green with red and black lettering and an image of two men and two women inside a building. The cover is torn away on the back right hand corner. There are five full page black and white illustrations scattered throughout the text. The inscriptions are handwritten in black ink. There is a stamp of a lion on the first page.‘Presbyterian Sabbath School Dennington, Prize awarded to Alma McCullagh, January 1929, R. Conn, Teacher’ ‘Alma McCullagh Dennington’ ‘Alma McCullagh’ alma mccullagh, joseph conn, illowa, history of warrnambool

This is an early school reader and the name, ‘B. Morris’, suggests that it belonged to Bruce Morris, the editor of the Warrnambool Standard newspaper from 1946 to 1968. Bruce Morris was prominent in Warrnambool as the writer of a great number of historical articles in the Warrnambool Standard and as a passionate supporter of regional Victoria. He was the son of Frederick and Sarah Morris and the grandson of George Lance, prominent in 19th century Warrnambool as a plumber, inventor, musician, artist and writer. Lance is regarded as the founder of the Warrnambool Art Gallery. Bruce Morris helped to establish the Warrnambool Rostrum Club. This book is of interest because it is an early 20th century example of a school reading book. If it belonged to Bruce Morris then it is of greater interest. Bruce Morris rates with Richard Osburne, Edward Vidler and Henri Worland as a significant promoter of, and writer on, Warrnambool’s history. This is a soft cover book of 16 pages. It has a pinkish-red cover with a black and white illustration of The Three Bears story on the front cover and the titles in black print. The back cover has advertisements for other books by the same publisher (Macmillan and Co.). The inscription and some other writing on the front cover are handwritten in blue ink. The cover is a little faded and has partly come away from the pages. ‘B.Morris’ bruce morris, history of warrnambool

This book contains passages from literature for use in the teaching of Pitman’s shorthand. Isaac Pitman (1813-1897) was an English educator who invented in 1837 the shorthand system named after him. Pitman’s shorthand was the most widely used shorthand system in the 19th century and early to mid 20th century. Pupils studying commercial subjects learned Pitman’s shorthand until it was replaced in the second half of the 20th century in Victorian State schools by Dacomb’s shorthand system. No information has been found on D. Vickers.This book is of interest as an example of the type of shorthand tcxt books used early in the 20th century. It is useful for display.This is a soft cover book of 63 pages. It has a green cover with blue binding and black printing on the front cover with a printed signature of Isaac Pitman enclosed by an ornamental border. The back page has printed information about other Isaac Pitman books. The front cover has a circular black and green label pasted on. The pages are slightly detached from the binding. The inscription is handwritten in black ink and pencil.‘D.McK. Vickers’ pitman’s shorthand, history of education

This book is a reprint of a rare 19th catalogue of Australian tradesmen’s tokens. A token was a coin to the value of one penny produced in the mid 19th century to benefit businesses at a time when there was a shortage of English pennies. The token or penny had the name, business and date on the coin and could only be used in that particular business. In Warrnambool two businesses, those of William Jamieson of Liebig Street and William Bateman of Banyan Street, had tokens (1855 and 1862). Today examples of these local tokens are highly valued because of their historical interest. This book is of interest as a reprint of a 19th century catalogue of Australian token coins. It will be useful as a reference book.This is a soft cover book of 80 pages. It has a yellow cover with black print within a white background frame. The text contains many black and white images of tokens.tradesmen’s tokens in australia

This button has come from an item of clothing made by George Wardrop, a well-known Victorian tailor who was apprenticed to a Mr J. Jones in Smith Street Collingwood in the late 19th century. George Wardrop was a partner in the Jones firm for seven years before opening his own tailoring business in Collingwood and later in Northcote. The business expanded, with a major store in Melbourne established in the 1930s, (Wardrops, My Tailor) and other stores opening in suburban and regional areas in Victoria. The business lasted until the early 1970s. This button is of interest as it was found in a Warrnambool garden and perhaps came from an item of clothing owned by a local resident and purchased from a Wardrop tailoring shop early in the 20th century.This is a round buff-coloured button with an eyelet and printing around the button edge. The item is slightly bent and discoloured.‘G. Wardrop Collingwood’wardrop, tailor

This meat safe has no known local provenance but it would be typical of the safes used in a domestic situation to house fresh meat. Usually the safe was hung in a house corridor or verandah or outside in a cool place where there was a breeze that passed through the mesh and kept the contents cool. The mesh also prevented flies and other insects from getting into the safe. Meat safes were widely used in Australian homes in the 19th century and early to mid 20th century, sometimes in conjunction with ice chests, until they were replaced by refrigerators. This item is retained for display purposes as an example of domestic food preservation in Australia 80 to 100 years ago.This is a metal box with a rectangular-shape base and a semi-circular top. All sides except the top and the bottom are made of fine metal mesh. The front is reinforced with metal strips and has a metal clip. The curved top is ridged and has a metal clip.The safe is somewhat rusted and damaged. Registered under Commonwealth Act Nos. 101-102-103 G.W.Rowleyfood preservation – australia, warrnambool, history of warrnambool

Bentleigh Presbyterian Church Calisthenics Group was established following the popularity of physical education programs for women that began in the 19th century. Following World War 11, the population of the City of Moorabbin increased rapidly as the market gardens were divided into housing lots and sold to returned Soldiers who began to establish their families in the area. The 'Baby Boomers' were born and schools, churches, sporting clubs were overflowing with young members. Judy Clark joined this Calisthenics Group c1964 and enjoyed the exercise, companionship and presentation of displays for the local communityGladys Reed was a member of the Ormond Choral Society c 1950. who performed plays and musicals the City of Moorabbin and she was an accomplished dressmaker and made this outfit for her daughter Judy.c1964Calisthenics uniform made of white cotton sleeveless dress with side opening fastened by press studs and bloomers moorabbin, bentleigh, ormond , clothing, physical education, calisthenics, presbyrterian church bentleigh, reed gladys, clark judy, post world war 2 estates,

The museum houses an extensive collection. It provides educational programmes for schools and other groups. There is a unique collection of 19th century guild banners representing Weavers, the Shoemakers, and the Carpenters. Trade banners also represent the Brick and Stonemasons, Farm Labourers and the Boyne Fishermen. The Old Drogheda Society founded in 1964 by a group of concerned citizens for the preservation of Drogheda's historical monuments and the collection and recording of historical material relating to the town and surrounding area established the award winning museum. The Museum was opened in 1974 and in 2013 achieved full accreditation by the Heritage Council.

Wax matches also known as 'strike anywhere' were invented in 1826 by William Newton in England. It consisted of a wax stem with embedded cotton threads and a tip of phosphorus. Cases of various styles were introduced to protect against accidental combustion. This simple but robust metal cylindrical box with close fitting cap made it attractive to soldiers in World War One. Bryant & May was a British company created in the mid-19th century specifically to make matches. In 1901 they acquired the rights to the Swan Vesta process.Match cylinder with press on lid.On cap " Bryant & Mays Wax Vesta London"match, bryant & may

Variably described as mantel hangings, pelmets or valances, these became a common form of Victorian interior decoration in the second half of the 19th century. The hanging uses arrasene embroidery which was introduced for artistic embroidery c.1883. Arrasene embroidery was a variation of chenille embroidery and was mainly used for curtain borders, mantel hangings and screens. When used to embroider flowers on velvet or plush, it was sewn upon the surface without being ‘drawn through’. Madonna lilies, irises, daffodils and narcissi were commonly used in designs of mantel hangings.Velvet mantel hanging embroidered with chenille thread. The scalloped edge of the pelmet is bordered by multicoloured silk cording. This example was owned by Netty Cornish of 15 Peel Street, Kew, and donated by her daughter, Mrs F Plumridge in 1980. The embroidered flowers in this example include narcissi and roses.mantel pelmet, peel street, kew, nettie cornish, mary plumridge

The Henty family and their descendants were notable settlers in Australia, initially in Western Australia, then in Launceston and finally in Victoria. While most family members settled in Victoria from 1834, others remained in England and in Tasmania. The identity of the sitters in this mid 19th century pair of portraits is as yet unidentified. The locket was purchased by the Society as part of a small collection of Henty memorabilia and portraits from the owner of Moorabool Antiques, Geelong in 2021, which had in turn acquired the item from the estate of Dennis Alston of Alston's Antiques in Hamilton, Victoria.Members of the extended Henty family were notable British settlers of southeastern and southwestern Australia. The connection to Kew (Vic.) is that members of the Henty family owned important mansions in Kew in the 19th century. Stephen George Henty's family lived at 'Findon', and Francis Henty of 'Merino Downs' in the Western District lived in his final years at 'Field Place', Kew. Numerous members of the Henty family are buried in the Boroondara General Cemetery.Small hinged locket made of tortoiseshell inlaid with mother-of-pearl, silver and gold. The locket is designed to be worn as a pendant. The two hand-tinted encased oval portraits are of an elderly woman on the left and an elderly bearded man on the right. The inlaid locket is probably Indian given the style of the floral inlay on the front and reverse. The portraits do not appear to be daguerreotypes, ambrotypes or tintypes and require further technical investigation.henty family, australia - early settlers

The Taylor Slate was developed by Rev. William Taylor in England in the mid 19th century it was in common use until the early 1970's and enabled blind or vision impaired students to do maths calculations by arranging metal pegs in the slate. The main part of the slate is a metal sheet with 432, 8 sided holes which small metal pegs are inserted. The pegs have different shapes on their ends. These are used to represent different numbers and symbols depending on the way the pegs are placed in the slate and which combinations of pegs are used.39 sliver rectangular cubed pegs braille equipment, education

THE CARRON COMPANY The Carron Company established its ironworks on the banks of the River Carron in Falkirk, Stirlingshire, Scotland, in 1759, and became an incorporated company in 1773. The company was the largest ironworks in Europe during the 19th century. It supplied ammunition and armaments, steamboat engines, pig iron, cast iron goods such as flat irons, balustrades, fire grates and bath tubs, pillar boxes and telephone boxes, and even cast iron rings for underground tunnels. In 1982 it became insolvent and was taken over by the Franke Corporation, using the brand Carron Phoenix.This iron is representative of the domestic appliances used throughout Australia up until electricity became widely available for domestic use.An antique Carron iron made of solid cast iron. These types of iron were nicknamed "sad irons" from the Old English where "sad" was originally a word which meant "heavy and solid". Typically, there would be two irons simultaneously in use: one to iron with and one being heated up on the stove or in the fire. This iron has a flat bottom and back and it curves to a point at the front. It has a goose neck handle which has a twist. Irons such as this were often given the name "goose" irons. Near the front of the iron on its top '11' is marked. These irons were used from the late 18th to mid 20th centuries before electricity was widely available in all areas, particularly in rural environments.On top of iron "CARRON"flat irons, domestic appliances

Edward Whitehead was a printer and publisher active in Melbourne during the latter half of the 19th century. Whitehead founded his printing business at 67 Collins Street East in 1864 and, though not focused on maps, began publishing his own series of maps of Victoria in 1867. He focussed on producing highly detailed folding maps of Victoria which included a very detailed index of place names. His series of maps of Victoria became one of the most successful and most profitable series of regional maps of Australia ever produced.This is a very early map of Victoria showing Belvoir (Wodonga)A detailed early map of Victoria with counties clearly marked and shaded and a detailed index. It also shows roads, post office towns, railways, telegraphs, gold mining areas and notes on topography. Relief shown by hachures and spot heights. Includes a list of towns with distances from Melbourne on 3 sides of map. It is produced on paper mounted on linen.victoria cartography, rare maps victoria, whiteheads maps

Mat making was an essential part of many workshops staffed by blind or vision impaired employees since the 19th century. In Australia, it was a skill taught in along the eastern seaboard until the supply of cheaper mats from Asian sources rendered it financially non-viable as a source of employment. These examples were made in the RVIB workshops and demonstrate the variety that could be made, with a plain mat, one printed 'RVIB' in black on one side and in in reverse in various colours on the other, and the other with 'Welcome' on the front and 'Made by the blind' on the reverse.3 coir mats made by RVIB workersRVIB Made by the blindemployment, royal victorian institute for the blind

The Taylor Slate was developed by Rev. William Taylor in England in the mid 19th century it was in common use until the early 1970's and enabled blind or vision impaired students to do maths calculations by arranging metal pegs in the slate. The main part of the slate is a metal sheet with 432, 8 sided holes which small metal pegs are inserted. The pegs have different shapes on their ends. These are used to represent different numbers and symbols depending on the way the pegs are placed in the slate and which combinations of pegs are used.1 silver rectangular metal mathematical slate including tray braille equipment, education

The Australian magpie is a passerine native to Australia and southern New Guinea. Renowned for its black and white plumage and distinctive song, the Australian magpie has also established populations in New Zealand and on the Fijian island of Taveuni, where it was introduced during the 19th century. Previously classified as three distinct species, it is now recognized as a single species comprising nine subspecies. Belonging to the family Artamidae, the Australian magpie is the sole member of the genus Gymnorhina and shares its closest relation with the black butcherbird (Melloria quoyi). Unlike the Eurasian magpie, it is not part of the Corvidae family. This specimen is part of a collection of almost 200 animal specimens that were originally acquired as skins from various institutions across Australia, including the Australian Museum in Sydney and the National Museum of Victoria (known as Museums Victoria since 1983), as well as individuals such as amateur anthropologist Reynell Eveleigh Johns between 1860-1880. These skins were then mounted by members of the Burke Museum Committee and put-on display in the formal space of the Museum’s original exhibition hall where they continue to be on display. This display of taxidermy mounts initially served to instruct visitors to the Burke Museum of the natural world around them, today it serves as an insight into the collecting habits of the 19th century. This specimen is part of a significant and rare taxidermy mount collection in the Burke Museum. This collection is scientifically and culturally important for reminding us of how science continues to shape our understanding of the modern world. They demonstrate a capacity to hold evidence of how Australia’s fauna history existed in the past and are potentially important for future environmental research. This collection continues to be on display in the Museum and has become a key part to interpreting the collecting habits of the 19th century.This specimen an Australian Magpie with black and white plumage over the body, mounted on a cedar stand. The specimen has a large straight beak and is in an unusual pose for a magpie, compressing the white patch on the back of the neck. The beak has turned yellow where originally grey, potentially leading to a previous misidentification as a white-winged chough.taxidermy mount, taxidermy, animalia, burke museum, beechworth, australian museum, skin, reynell eveleigh johns, bird, australian magpie, ornithological, ornithology

This wooden table is a classic, simple design seen in kitchens in the 19th and 20th centuryThe table is representative of furniture of the 19th and 20th centuryTable; wooden with four wooden turned legs, varnished, and unvarnished top. flagstaff hill, warrnambool, maritime museum, maritime village, flagstaff hill maritime museum and village, furniture, table, kitchen table, dining

The Padbury family were the dominant funeral directors in Kew in the 19th and 20th centuries. Sepia photographic positive of Mrs Emmeline Lovell Ratten (nee Padbury) (1860-1941). It would appear that the later inscription on the reverse is incorrect as Frederick Ratten married Emmeline Padbury in 1885.Postcard format: "Auntie Ratten (nee Florence Padbury) wife of Fred Ratten - Kew councillor. Florence Avenue named in her honour". Stamp upper left: "The Allen Studio, 318 Smith Street, Collingwood." Postcard stamp upper right: "Kodak Australia".padbury family, ratten family, florence padbury, florence ratten, florence avenue -- kew (vic.)

Manufactured by Holden and Frost during 19th and 20th century, Civilian and Military useManufactured and sold by Holden and FrostNickel plated horse bit with four ringsequine, horse bit, military, civilian

Used on horse tackle during the 19th and 20th centuries and imported by Holden and Frost Sold by Holden and Frost for. agriculture and civilian use c1900Nickel plated roller half buckle equine, agriculture, civilian, military c1900, buckle half

Used on horse tackle during the 19th and 20th centuries and imported by Holden and Frost Imported c1900 and retailed by Holden and Frost for military agricultural and civilian use c1910Nickel plated roller half buckle equine, military, agriculture, civilian ca 1910, buckle half

Used on horse tackle during 19th and 20th centuries and manufactured by Holden and FrostSold by Holden and Frost for military agricultural and civilian use65 ml ring made from brassNilequine, military, agriculture, civilian ca1910, brass ring

Used on horse tackle during the 19th and 20th centuries and imported by Holden and FrostSold by Holden and Frost for military agricultural and civilian useNickel plated covert snap used on horse tackleequine, military, agriculture, c1900, covert snap