A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc.Draw knife with metal blade and two wooden handlesMarkings on blade unreadable flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw knife with metal blade and two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

A draw knife or drawing knife, draw shave, shaving knife is a traditional woodworking hand tool used to shape wood by removing shavings. It consists of a blade with a handle at each end. The blade is much longer along the cutting edge than it is deep (from cutting edge to back edge). It is pulled or "drawn" toward the user. A draw knife is commonly used to remove large slices of wood for flat faceted work, to debark trees, or to create roughly rounded or cylindrical billets for further work on a lathe, or it can shave like a spokeshave plane, where finer finishing is less of concern than a rapid result. The thin blade lends itself to create complex concave or convex curves such as in making staves for barrels.A specialised tool used in many different types of wood working and in the making of barrels, this type of tool has been used for many hundreds of years by coopers and other woodworking craftsmen all around the world. It is a tool that has not changed in design during this time and is still used today by craftsmen in the making of wooden barrels for the storage of wines etc. However this item at this time cannot be associated with an historical event, person or place, provenance is unknown, item assessed as a collection asset as it is believed to have been produced before 1950.Draw Knife bent blade, metal with two wooden handlesNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, draw knife, coopers tools, woodworking tools, knife, cooperage

Neville Barnes obstetric forceps have a cephalic and pelvic curve and are used for delivery of babies presenting as occipitoanterior. The left blade is put on first, followed by the right blade – the baby is then pulled down until the occiput is under the symphysis, then pulled around. This particular set of Barnes forceps is unusual because it has handles/grips associated with Simpson type obstetrical forceps, making it a combination of styles. These forceps are similar in appearance to a style of 19th century forceps known as Hensoldt's forceps, made by Jetter and Scheerer, c. 1899. These are pictured as Fig. 771 in the Sir Kenardatth Das catalogue (see references). J. Gray & Son, Sheffield, were in operation from 1849 to 1962, so these forceps date from this time period.Set of obstetric forceps. Consists of a set of stainless steel blades, with black bakelite hand grip attachment. Forceps are engraved with the text 'J.GREY & SON" and "SHEFFIELD". The number '4' is engraved on the inner aspect of the blade, at the join point.'J.GREY & SON/SHEFFIELD'obstetric delivery

Photo sent to Mary Jack, Pittsburgh USA by Charles Schwerkolt. Accompanying text sent by Charles - 'This is the end facing Deep Creek Road. You will notice the wood boards are all curved. The floor is all eaten away with white ants and is all levels and the weatherboards have fallen at the ends. The roof is very bad also the gable of the stone looks not so good. The wooden kitchen is about 6 inches away from the stone house all the way around. You will notice the roof of the stone house is all colours with rust and paint. You will notice there are no spouts to take the water away. I took another photo but the light got into the lens of my camera so they would not print a photo from it.Black and white photo of Schwerkolt Cottage. The condition of the Kitchen roof is visible. The floor was ant eaten and a 6"' gap separated the Kitchen from the Cottage. Thin Black Border.schwerkolt cottage, schwerkolt, charles clarence victor, whalen, rosalie, jackschowsky, mary elizabeth

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. The V&A's history of fashion describes 1930s dresses as characterised by '... a slinky femininity... Parisian couturiers introduced the bias-cut into their designs, which caused the fabric to skim over the body's curves. Long, simple and clinging evening gowns, made of satin were popular. Often the dresses had low scooping backs'. This dress was made for an aunt of the donor, who was the daughter and sister of well-known male Melbourne architects in the Smart family. Long floral green crepe georgette dress.women's clothing, dresses, australian fashion - 1930s

The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories.The V&A's history of fashion describes 1930s dresses as characterised by '... a slinky femininity... Parisian couturiers introduced the bias-cut into their designs, which caused the fabric to skim over the body's curves. Long, simple and clinging evening gowns, made of satin were popular. Often the dresses had low scooping backs'. This dress was made for an aunt of the donor, who was the daughter and sister of well-known male Melbourne architects in the Smart family.Long cream and orange floral crepe georgette evening dresswomen's clothing, australian fashion - 1930s, fashion and textiles collection, rosemary smart

One of a pair of posed photographs of Car 7 in Corio Tce. prior to opening day. The tramline curves to the right into the depot whose entrance lies between Blakiston & Co on the right and the MESCo's offices on the corner of Yarra St., to the left. Note its ornamental turret, removed in the 20s. The carefully arranged poseurs are employees of the Company, recognisable from the other photographs. The second photograph (Item No. 8617 - large print on wall in board room) shows the opposite end of the tram with the Geelong Club and Mac's Hotel in the background. The same characters are aboard, differently arranged. Early 1912. Note also the front destination box (mechanism unknown) that was replaced with roller destination blinds with a set of four coloured lights above.Black and white print on paperNoi. 1 inside a circle and 13-9 written on the reverse in ink. GRS710/13/1/9 written on the reverse in pencilgeelong tramway car no. 7, geelong streetscape c.1912

Relaying tram tracks at the eastern end of Aphrasia St., Newtown, looking east. The location is immediately west of the Pleasant St. intersection, soon after Aphrasia St. was extended from Pleasant St. to Pakington St. so that the three sharp curves for trams into Retreat Road, Pleasant St. and then Aphrasia St. were reduced to one, from Pakington into Aphrasia St. May 1914. Note that sleepers are being used 8in the construction. All the original tracks were laid as a "stringer" construction, as seen in items 9271 and 9214, with tie bars and continuous concrete about 50cm wide under each rail. The overhead is being worked on in two ways; safely with the horse drawn tower wagon, or less so by ladder.Black and white print on paper.GSR710/25/1/8 and 25-8, written on the reverse in pencil. The No. 1 in a circle written on reverse in ink.geelong tramway, relaying stringer tram tracks in geelong, stringer tram tracks, aphrasia st.

The design of this set of four lightweight chairs is based on Thonet’s bentwood designs, which are still some of the best-selling designs for café and restaurant owners. It is elegant, sophisticated and durable. Some of these chairs still have their original seat, under which the letters “TH” or “RSL” are hand written. Flagstaff Hill has several bentwood chairs with these letters on them, in either chalk, black paint, or both. It is believed that the chairs were used in the original Warrnambool Town Hall, and later the RSL. The Town Hall was completed in 1891, built on the corners of Timor and Liebig Streets. (In 1977 the Town Hall was declared unsafe and was later replaced by the Warrnambool Performing Arts Centre.) Some of the chairs have marks, paper labels and symbols on them that show that the maker was Josef Jaworek, who had a small furniture factory in east Sinensia, which was at that time in Austria, from 1907 - 1914. Bentwood chairs are made by a process of wetting wood in water, bending it into curved shapes, then allowing it to dry so that the shape becomes permanent. This process originated by Michael Thonet, who had been given the right to bend wood into desired curves by the Austrian Courts in 1842. In 1856 he was granted a 13 year patent to manufacture chairs and table legs of bent wood treated by steam or boiling water. In 1859 his company Gebruder Thonet produced his original design. Thonet’s early designs also featured hand carved or laminated wooden seats. His Model No. 14 was produced in the 1850’s and his most popular design. After Michael’s death in 1871 the family went on designing and producing chairs. These bentwood chairs are believed to be associated with the original Warrnambool Town Hall. The Warrnambool Town Hall played a significant role in the both the local government and the social events of local and district areas. It was a place for Council meetings, community events and entertainment, theatrical and musical.Bentwood chair (4 of 4), painted black, inner back is curled loop, seat has leather cover attached with studs, ventilation holes under seat, legs are splayed and have a bracing ring. Marks: under seat, handwritten and stamped into wood.Marked with handwritten "TH", in both black paint & white chalk. Under rim is label printed "65" Stamped into wood on rim under chair "95".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bentwood chair, café chair, restaurant chair, josef jaworek, austrian chairs, furniture

The design of this set of four lightweight chairs is based on Thonet’s bentwood designs, which are still some of the best-selling designs for café and restaurant owners. It is elegant, sophisticated and durable. Some of these chairs still have their original seat, under which the letters “TH” or “RSL” are hand written. Flagstaff Hill has several bentwood chairs with these letters on them, in either chalk, black paint, or both. It is believed that the chairs were used in the original Warrnambool Town Hall, and later the RSL. The Town Hall was completed in 1891, built on the corners of Timor and Liebig Streets. (In 1977 the Town Hall was declared unsafe and was later replaced by the Warrnambool Performing Arts Centre.) Some of the chairs have marks, paper labels and symbols on them that show that the maker was Josef Jaworek, who had a small furniture factory in east Sinensia, which was at that time in Austria, from 1907 - 1914. Bentwood chairs are made by a process of wetting wood in water, bending it into curved shapes, then allowing it to dry so that the shape becomes permanent. This process originated by Michael Thonet, who had been given the right to bend wood into desired curves by the Austrian Courts in 1842. In 1856 he was granted a 13 year patent to manufacture chairs and table legs of bent wood treated by steam or boiling water. In 1859 his company Gebruder Thonet produced his original design. Thonet’s early designs also featured hand carved or laminated wooden seats. His Model No. 14 was produced in the 1850’s and his most popular design. After Michael’s death in 1871 the family went on designing and producing chairs. These bentwood chairs are believed to be associated with the original Warrnambool Town Hall. The Warrnambool Town Hall played a significant role in the both the local government and the social events of local and district areas. It was a place for Council meetings, community events and entertainment, theatrical and musical.Bentwood chair (1 of 4), painted black, inner back is curled loop. Seat is padded leather, attached by studs. Splayed legs. Patterned ventilation holes under seat. Under seat are various Marks; hand painted, printed on small piece of paper, stamped in wood.Under seat are various Marks; hand painted in black "TH", printed on small piece of paper "400", stamped in wood "400" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bentwood chair, café chair, restaurant chair, josef jaworek, austrian chairs

A laryngoscope is an instrument used to view the larynx (voice box), which is the opening to the trachea and lungs. It consists of a “blade,” which goes into the patient’s mouth, and a handle. Prior to 1943 when Macintosh introduced his curved blade, most laryngoscope blades were long and straight. The straight blades were used to directly hold the epiglottis. Macintosh’s curved blade works differently: it indirectly opens the epiglottis by applying pressure to a space between the root of the tongue and epiglottis, called the vallecula. The flange running along the left lower edge of Macintosh’s blade was also a novel innovation. It was designed to move the tongue to the side, which improved the view of the larynx and made more room for a breathing tube. The Macintosh Laryngoscope remains one of the most popular blades worldwide. (Source: Wood Library Museum) This laryngoscope was previously owned by John Mainland, as evidenced by the name etched into the handle. Mainland graduated from the University of Melbourne in 1950 with a Bachelor of Science degree. After researching and completing his medical degree, Mainland entered into the field of anaesthetics, training at the Royal Women's and Royal Children's Hospitals, later Alfred Hospital, in 1959. He completed training in 1964 and remained at the Alfred Hospital. During his career, he also became the first anaesthetist appointed to the position of Professor in Victoria. His other achievements include manufacturing a respiratory monitoring module that accompanied astronauts on the United States moon landing and developing a stimulator to lessen the risk of deep vein thrombosis in surgical patients. Mainland became a Fellow of the Australian and New Zealand College of Anaesthetists in 1992, retiring from the profession in 1997.Oblong shaped handle with textured grip. Attached is a laryngoscope blade in a cruved shaped with light tube running through one side.Etched into top of handle: J.F. MAINLAND •Stamped into top of handle: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into base of handle: CLOSE [arrow] •Etched into base of blade: MAC / 4 •Stamped into side of blade: REGD TRADE MARK / PENLON / MADE IN ENGLAND •Stamped into side of blade: STAINLESSmacintosh, robert reynolds, new zealand, laryngoscope, mainland, john, alfred hospital, moon landing

This music stand belonged to Eva Veronica Gaspar. Miss Gaspar (1913 -1978) was one of Warrnambool's most notable musicians and photographers. She gave free music lessons to Warrnambool and district children, organised choral festivals and ran a printing business. She was a life member of the Warrnambool Music Society and organized the Mozart Music Festival for many years. She was a Warrnambool Citizen of the Year 1956 and was awarded a British Empire Medal in 1972 for her services to music. She also conducted the Warrnambool Civic Orchestra, St. Joseph's church choir, junior choirs and recorder groups. In 1977 she held an exhibition at the Warrnambool Art Gallery of her photographs, drawings and monochromes. This music stand was used by Eva Gaspar mainly in Mozart Hall in Gilles Street. This stand is of interest as a memento of the work of Eva Gaspar an important musician in Warrnambool in the twentieth century.This is a wooden music stand with a circular base on four feet. The base has an outer ridge with a shallow indent and a domed top into which the pedestal is attached. The pedestal has decorative features . The ledge at the top is rectangular shaped with a projecting curved edge at the base. The top has a compartment for holding music and/or notes. The pedestal is attached to the top tray with a circular brace and metal screws. The whole item has been varnished but is stained and rubbed. Underneath the tray are stencilled letters in white paint.C. W. M.S.eva gaspar, music stand

These items come from the house "BIRCHWOOD" in Koroit Street, Warrnambool belonging to Dr. Angus and family. Dr. William Roy Angus (1901-1970) practised in Warrnambool from 1939 to 1970. In his later years Dr. Angus was an important ophthalmologist. He was prominent in Warrnambool in both medical and community affairs. The Angus home "BIRCHWOOD" at 214 Koroit Street (the site of the Warrnambool Police station today) was noted for its beautiful garden, lawns and croquet court and used as a meeting place and entertainment centre for vice-regal personnel and community organisations.These items are of considerable interest as they are connected to a well known doctor in Warrnambool and a notable house..1,.2,.3 These are three wooden door plates with a fine ridged front and a curved top and base. They have four holes to be used with nails to attach to the door. .4, .5 These are two wooden key hole covers with half spherical shapes at the top, ridging and carving towards a tapered base. .4 has a brass circular plate at the back with two small decorations protruding at the top. The screw attaching it to the front is broken..5 As for .4 but the brass section is missing and the screw is intact..2 East side door, front passage. .3 West side door dr. angus warrnambool, birchwood warrnambool, door plates, key hole covers, warrnambool, warrnambool history

Items issued to Frederick Ernest ADDLEM VX142253. Refer Cat No 432.2 for his service history and 937P..1) Badge, shoulder blackend brass "Australia" curved with 2 lugs on rear with clip .2) same as above with only one clip .3) Badge, Lapel, blackend brass. Rising Sun with Kings crown centre, scroll at bottom, rear has 2 lugs .4) Same as above with 2 x clips on lugs .5) Badge "Returned from Active Service." Kings Crown over wings, Rising sun, Anchor, boomerang at bottom with writing.3)/.4) "Australian Commonwealth Military Forces" .5) On Rear "244157 - issued by the C.wealth Govt"badges, military

Tin container (cylinder), soldered joints. Flat bottomed. Curved top. WW1. One end has sloping surfaced. One end is open. Originally covered with leather and strapping. The interior used to have a soft lining. Numerous holes or various shape in sloping end. The tine is rusty and most leather has perished away. Lid to suit container originally leather covered. The original display card states "dug up in France. Believe to be some type of field telephone container. containers, equipment

This machine was made in Baden, Germany, for the Ward Brothers of Melbourne, who imported machines from various manufacturers and had them branded with their Ward Brothers decals. This machine is most likely dated before 1911, when the Ward Brothers became two separate businesses, as one of the decals appears to have been deliberately removed. The case is made in an attractive design and the machine itself has decorations that are pleasant to the eye. Even the metal cover of the folding handle has a swirling design on it. The machine has the added bonus of a ruler along the front base. Many sewing machine manufacturers in Germany produced their machines specifically for export. A company could mass-produce its machines and give the same product several different brand names, according to their overseas buyers. There was a huge market for domestic machines as it enabled tailored clothing to be made in households at a fraction of the retail prices. Ward Brothers began in Australia in the late 1890s and early sewing machines sold by them had the three brothers on their decals. In 1911 the brothers divided into two separate firms, one operating on his own, the other two remaining together, and all still operating in Melbourne and at first still using the name Ward Brothers.This sewing machine is one of two hand-operated Ward Brothers machines in our collection that were made in Baden, Germany, and the only one that has had the three Ward Brothers on its decal, and that has front and rear slide plates. This machine represents the early domestic market for sewing machines, making it possible for the everyday homemaker to produce fashionable garments and linen ware that was affordable. The owner of this machine could work at more than one location as it was portable and did not require a large space to set up. The machine is associated with the well-known Ward Brothers of Melbourne, who sold imported sewing machines that were branded with their own name. Sewing machine, hand operated, in wooden case. The machine is painted black with gold decals, and front and rear slide plates. The wooden base of the machine has an inlaid ruler. The case has curved sides and shaped ends, decorative woodwork on corners, an inlaid diamond pattern on top, and a folding metal handle. Accessories are included. The decals include doves, inscriptions and swirls, and there is a map of Australia with two portraits of men. The machine was made in Baden, Germany, for Ward Brothers, Melbourne. Images: Map of Australia with States marked, and with portraits of two men. [A portrait-sized area on the left of the men has had the image removed.] Text in printed script: "Specially / Made in Baden" "WARD BROTHERS / MELBOURNE" " with a Logo is a map of Australia,flagstaff hill, warrnambool, great ocean road, sewing machine, hand operated, pre-1911, domestic sewing, homemade clothing, fashion, ward brothers, made in germany, baden, front and rear slide plates, crank handle, hand crank sewing machine

Cardboard white box with decorated coloured flowery sides which curve over the edge to frame the top of the box. Top of the box has a picture of a smart fashionable lady wearing a broad brimmed black hat with a pink rose and seemingly wearing a white fur shawl. Her body is not shown. The inside of the box is divided into 4 equal compartments - 1 across and 3 in a row lengthwise. 15 metal black hairpins are in 3 of the compartments and 2 brown plastic hairpins in the other. Base if the box - "Finest selected / Hairpins. / Black / Made in England hair pins, make-up, personal item, hairdressing, toiletries, bathroom

Bullock drays were commonly used to transport heavy loads, such as the wool clip from a large property, across long distances.In the 19th century. The yoke is worn on the neck of the bullocks and is secured by a belt around the neck. The bullocks push the yoke with their shoulders, hump and neck; therefore, the work is performed.This yoke seems to be handmade on a farm. It was used in the Kiewa ValleyA wooden bar behind a harnessed horse. It is used to balance the pull of a draught horse or other draft animal (bullock) when pulling a vehicle like a plough. A yoke is an interface between bullock power and actual work to be performed.This yoke is timber with a shape to form curved depressions that allow it to rest across the necks of two bullocks to keep them together.The bullocks were chained to the steel oblong ring - one at each end of the yoke. The middle ring was attached to the bullock or vehicle in front of them.bullock yoke, swingletree, farm equipment, plough

Black and white photo copy: image shows two-storey brick building, curved windows on lower storey, square on top Building is situated on corner of Williamson Street and Pall Mall. Written on extreme left hand side of building on single storey portion ' Bank of Australasia' below ' .. Assay Office' Men are standing on corner in front of building and on right hand side. J. Hold. Chemist & ' written on verandah of building on right hand side. Batchelder cart on RH side.Batchelderplace, building, bank of australasia, williamson st., bendigo, sandhurst, bank of australasia, williamson street, chemist

Black and white photo: two storey building with central tower with round clockface. Pointed parapets each end of building and curved trim to upper balcony and lower entrance. Cenotaph centre front. Single storey brick building on right cured tops to windows. Two storey building on left and tram line and overhead wires visible. Verandah and balcony of building on front right. On back in pencil ' Eaglehawk Town Hall' 'Eaglehawk Town Hall ( 198 ) James Lerk 5.11.1999.? Leo Hughes, photographer ( Aylene Kirkwood 17.7.2000 )buildings, town hall

Object. A 4.5 cm long suspended from a brass curved and decorated clasp at the top, to which is attached at the back, a 6.5 cm long pin , to attach to the wearers garment. This shaped brass clasp is repeated at the lower edge of the ribbon. Two Lodge symbols attached to the centre of the ribbon in a Xshape. Suspended from the lower brass clasp, which is scroll shape, is a brass fitting, from which hangs a perspex four sided shape, with lodge symbols printed on each side.organisation, masonic lodge, brass, perspex and ribbon lapel badge

Clothing. Elbow length, fine cream coloured kid leather gloves. Top edge is curved and is not hemmed. A plackett at the wrist is finely bound in the leather, and is 11.5 cm long. It fastens with three tiny 8 mm diameter pearl shell buttons, and bound button holes. The gloves are machine stitched, and it would appear that the long full-length side seam has been placed side by side, and then 'overlocked'. Three rows of angled stitching fans out over the back of the hand.costume accessories, female, kid leather gloves

Black single breasted tail coat.Jacket cut away and squared at waistline, two X 2 cm buttons on either side of front opening. Long sleeves with three V buttons and vent at wrist level 1.5cm. Single vent at back to waistline forming two tails falling to the back of the knee, tapering to a curve at the bottom. Fully lined with polished cotton-black in body of the coat with white lining in the sleeves. Section of the lining around the arm is quilted. Worn with matching trousers 11400.671.costume, male, black tail coat

Object. eight ribbed parasol. Black silk satin, and black cotton lace in a floral design. Eight peaks around the perimeter of the umbrella, attached to the double layer of fabric in the main body of the umbrella-an outer layer of silk, satin, and an inner layer of cotton. This lining is hand stitched. Frame, including handle of lacquered wood. Handle is graciously curved and carved like a feather. Top is finished with lace and a decorative satin ribbon-(5cms wide) bow with five loops, and nine cm tails.costume accessories, female, victorian black silk and lace umbrella

Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s. A metal pipe three centimetres diameter, 50 centimetres long has a cap screwed to the top which has a one centimetre diameter 13 centimetre long curved tube coming from the side of it. From the top of it a half centimetre diameter metal rod in a triangle six centimetres by nine centimetres by six centimetres pulls out and would have an attachment on to draw out the liquid. There is an attachment that slides on the pipe and has a screw cap on it to screw the pump to a container. Part of the Harris Collection.harris collection, kerosene pump