Used on a farm in the late 19th or early 20th century.A pair of shaped steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts, nuts and rivets and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.Indicipherable inscriptionhorses, horse accessories, harness, animal accessories, farm equipment, hames

BHS CollectionFox fur stole - mid brown colour. Wider at centre back than at ends.Each end has six short tassels ( 8cms). Fully lined with brown satin fabric. Fastened at front with cotton covered hook and eye. Centre back has pleated ruffle at neckline. False pocket at centre front on LHS. Stole made up from six long strips of fur. Stole worn by maternal grandmother of Barbara Filcock at Barbara's wedding to Kevin Gallagher 20/08/1960. The fur stole was owned by Bernadine Filcock of Bendigo. It was purchased at Myer Bendigo. The stole was worn for many years to family weddings and on a sea voyage in 1970. See also 11400.327 & 11400.328.Name tags stitched at each end ''B.Filcock'' Hand written.costume accessories, female, fox fur stole

Series of nine (9) Colour photographs, postcard size, of the replacement of trolley wire north of Gardens Loop by BTM crews 4/3/1997. Photos taken on the first day of the work. 722.1 - lifting new wire into position 722.2 - lifting new wire into position with the hook style showing 722.3 - unreeling the new wire from the trailer and wire drum 722.4 - lowering the old wire down onto the road 722.5 - unreeling the new wire from the trailer 722.6 - lifting new wire into position 722.7 - cutting up the old wire 722.8 - lifting new wire into position 722.9 - running old wire onto the roadway. See March 1997 Fares Please!On rear of all photos in blue biro " 4.3.97" and "Photo Carolyn Dean"trolley wire, wendouree parade, btm, repairs

Framed black and white photograph of the interchange between cable and horse trams at Moreland Road and Sydney Road Brunswick for the Coburg horse tram line. Has two cable tram sets in the background. Horse Tram No. 4, with the now Moreland Hotel in the background. Date around 1900, prior to the introduction of bogie trailers. Frame - brown varnished timber frame, glazed with clear glass, white card backing with brown tape on rear, brass wire hanging wire with small eye hooks the side. Framed by Conroy-Moffatt Pty Ltd of 316 Kings St Melbourne. See Reg Item 2312i3 and 6353 for another similar view which provides a date of 1890.trams, tramways, cable trams, coburg, brunswick, moreland rd, horse trams, tram 4

Instruction Book - 20 pages, within manila card covers, titled ""How to become an efficient conductor", published by the Melbourne and Metropolitan Tramways Board. Gives details on how to be a conductor safely, collect fares, disputes, school concessions, ticket cancellation, accidents, and conduct. A list of dos and donts' employee benefits summary and two drawings showing the consequences of not securing the trolley pole under the hook and step accidents. No date on the documents - assumed 1950's. Second copy added 15/1/2015 from donation of Lindsay Rickard. 739.1 - Second copy added 3/12/15 from donation of Gary Butler - has a green ink printed cover and printed on gloss paper.trams, tramways, mmtb, conductors, instructions, melbourne, depot

Clothing. Ladies' collar. Net fabric, entirely sewn into 'pin-tucks' .5 cm deep in the high stand-up collar, and increasing to 7.5 cm at the lower edge of the jabot front. Opening at the back, the jabot is fastened by nine metal hooks, and hand-stitched loops. Collar has a tightly gathered double frill of the tulle fabric, at neck and is held up right by five 'covered' 'bones'. The lower edge of the front and back is edged with a 1.5 cm wide silk fabric frill. Centre lower edge of back has two 59 cm long silk ribbon ties. This ribbon is also attached to the lower edge of the jabot 58 cm and 60 cm long - presumably for the wearer to tie firmly in place. Neckline seam is re-inforced and neatened by an organdie type fabric, hand-stitched in place. Two fine elastic loops (now perished) one 52 cm, one 58 cm would once have helped to hold the jabot in place, with the arms passing through the loops, to keep the jabot in place. Detached sleeves. Net fabric, entirely sewn into .5 cm tucks. Reaching from the wrist to above the elbow. A double net frill edges the wrists, where a 6.5 cm opening, fastens with metal hooks and hand-stitched loops. A cotton tape, .5 cm wide neatens and re-infrces this seam, and a row of chain stitch, in silk thread embellishes the outer side of the seam. Upper edge of the sleeve has a fine binding of silk ribbon.costume, female, cream tucked net collar and jabot

It is a woolen khaki green great coat, with inter shoulder lining of khaki green canvas. There are back belt loop holes in the interior, lined by the same canvas. The pockets are made of the same canvas and are not sew to the interior of the coat at the bottom. The insides of the sleeves are lined with a more beige khaki green material. There is a split flap that is 500mm long in the middle at the bottom of the coat, which is fixed shut with two brown plastic buttons and a metal hook and eye at the bottom. The construction of the jacket is four panels and has been taken in at the waist for form above both pockets. The jacket has a back pleat from below the triangle stitching below the nape of the neck. The back belt has three metal insignia buttons, and the backside is lined with canvas. On both shoulders, there are epaulettes which have one metal insignia button each. On the front, there are three metal buttons on each on flap, and when the jacket is done up, the left flap goes on top. It has three button holes on the left flap and one button hole on the right flap for a large brown button on the inside of the left flap. There are two outer pockets on either side of the jacket. Beneath the jacket lapels, on either side there are metal buttons, and there are button holes for them in the middle of the bottom lapel. Where the upper and lower lapels are split, there is a hook and eye. There is a brown plastic button on the underside of both the upper lapels, which is where the extra flap of fabric on the inside of the left jacket flap, can be fixed as a face protector. The tag on the inside reads; DAVID KLEIN PTY. LTD. Victoria 1967 An arrow (Department of defence symbol) SIZE 6 CLASS 8405 66.012.0494 REGIMENTAL NO................... NAME......................... The regimantal number section had a number filled in but then scribbled out and another number written above, which is 359282. The name section was filled in with B.R.MIER. The name and regimental numbers were done in black marker pen. All the metal buttons are decorated with the medical corps symbol, which is a serpent-entwined rod (Rod of Asclepius) surrounded by a laurel wreath and above the rod is a crown (St Edward’s Crown). On the outside of the upper sleeves, just below the shoulder, there is two patches that signifies the rank of Staff Sergeant. The top patch is an embroided St Edward’s Crown and represents the staff rank. It is 47mm wide and 45mm. Below this there is a patch depicting the three stripes/ chevorns of the sergeant rank. The chevorn’s points face down, and the sides measure 66mm, while the depth down to the point is 86mm. The bottom lengths is 100mm on both sides and the top lengths are 9mm. coat, trench coat, great coat, medical corps, staff sergeant, b.p. mier, 359282, david klein pty. ltd., 1967

The Chinese School was attached/run by the Town Mission. "THE CHINESE SUNDAY SCHOOL . The opening services of the newly erected Chinese Sunday school building in connection with the Town Mission, were brought to a close on Monday night by a tea and public meeting, held in the Mission Hall. The now building, which presents a very nice appearance, and is an improvement to that part of the Main road, was erected at a cost of £95 ; Mr H. R. Caselli acting as honorary architect, kindly prepared plans, etc. A new front fence was erected at a cost of £l6, which, with all other expenses, amounted to £126 3s 6d. Previously to the present effort collections and subscriptions were obtained as follow; —Mr Burnett's service, £l8 11s 5d; Chinese Sunday school anniversary, £9 16s 10d; concert on Easter Monday, £8 15s; Phoenix Foundry, per Mr Pethard, £7; sub scriptions, £23 8s 6d, leaving a debtor balance of £57 7s 9d. The. collections on Sunday were good. Mr Lee Young, of the Chinese store, Main road, kindly gave the tea, whioh was a valuable donation. The proceeds of the tea meeting will be about £l0. The building was prettily decorated by Mr Chessell, Mrs King Hook, and the gir!s.connected with the sohool. Mr Moorshead, the caterer, gave all the school children tea gratis- Mrs Lee Young, Miss Emma Lee Young. Miss G. Kay, Miss J. Hong Gong, Mrs King Hook, Mrs Stoneman, and Mrs Pethard waited at tables. Mr M. D. Morgan presided at the public meeting in the Mission Hall, and was supported platform by the Mayor of Ballarat East, the Revs. J. White, J. J. Perrin, and E. Turner, who delivered excellent and suitable speeches; but previously, however, offers of donations - to clear off the debt were made by Mr D. Ham, £10; the chairman, £5; Mr and Mrs Whitrick, £2 17s; a number of donors of £1 each, and less sums, which, with the collec tions, amounted to £58 16s 7d. This sum, with the sale of the cottage.on the ground, clears the debt, and leaves the com mittee a few pounds in hand towards lining and seating the building. A pleas ing feature in the meeting was the hearty giving of several Chinese Christians, including Mr Le Young; also singing by the Chinese chil dren, led by Mr Pethard. When the result was made known tbe whole, meeting stood and sang —“ Praise God from whom all blessings flow," for the success in having the place opened free of debt. Votes of thanks were passed to Mr Caselli, and all who took part in the effort: and one of the happiest meetings ever hold by the mission was brought to a close by again singing the doxology and the benediction." Ballarat Star, 27 February 1885)Black and white image of a weather board school known as the Chinese School, Ballarat.chinese school, ballarat, ballarat town and city mission, chinese, education, school, chinese sunday school

This object was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s SS Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Surgical instrument set in wooden case contains instruments for ophthalmic (eye) surgery. Case has hinged lid, lock, removable compartment; inlaid brass strips, nameplate on lid, brass hook closures. Lined with purple fabric and fitted to hold surgical instruments; brass protective strip under tips of sharp instruments. Contains 8 fine instruments and 3 long, glass head pins. Scissors have corrosion. (Set is incomplete). Inlaid cream strip along inside edge with black print "ARNOLD & SONS" WEST SMITHFIELD LONDON" Instrument have varying impressed marks "MAYER & MELTZER, LONDON or "M&M LONDON" or "M&M Co" or "GRESCOE" (W.R. Angus Collection) Inlaid cream strip along inside edge with black print "ARNOLD & SONS" WEST SMITHFIELD LONDON" Instrument have varying impressed marks "MAYER & MELTZER, LONDON or "M&M LONDON" or "M&M Co" or "GRESCOE"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, surgical instrument set, dr w r angus, medical equipment, surgical instrument, dr ryan, ophthalmology, s.s. largs bay, warrnambool base hospital, nhill base hospital, flying doctor, medical history, medical treatment, mira hospital, medical education, medical text book

This Edwardian era mourning outfit was worn by a wealthy woman from the rural area of Willaura, southeast of the Grampians. It was inherited by the donor from his mother, who had purchased it from a clearing sale in the 1960s. The jacket has a peplum or flounce below the waistline, a fashion that was seen in the 1860s and is still around in the 1900s. The outfit represents the female mourning fashion and wardrobe from the late 19th to early 20th centuries. Such garments were a necessary inclusion as death occurred often to the young, due to illness, accidents and hard work - it was a regular part of life in rural Victoria. Mourning outfits were a part of a person’s wardrobe and often passed from one generation to the next. This particular outfit appears to have been adjusted at some stage to allow for a wider waistline. The original skirt may have been replaced by the one that is now part of this outfit; the skirt is all machine-sewn, unlike the jacket and petticoat. The fabric of the skirt may be silk or it could be a synthetic fibre such as artificial silk or rayon; both were available in the 1800s,but nylon wasn’t invented until the 1930s. This skirt has sunray pleating, which was advertised on skirts for sale in the 1890s, and 1909, and was part of a fashionable bridal gown train in the 1930s. The mourning of death was part of both family and community life, particularly in rural and remote areas. People were bonded through work, religion, disasters, tragedy and social activities, supporting one another. They came together from near and far on such an occasion, giving each other the care that was needed and showing respect for the member who had passed away.This three-piece silk Edwardian mourning outfit is significant historically for its connection with rural Victoria and the social and religious customs surrounding the death of a family or community member. The high-quality outfit is also significant for representing the financial management of the times, being tailored by a dressmaker for a person of means and then adjusted to fit at least one different-sized person. The black silk tailor-made jacket is one of three pieces of a ladies’ Edwardian mourning outfit. It has long sleeves, a stand-up collar trimmed with appliqued black crochet lace, and pleated sashes on the left and right sides from front to back fastened at the shoulder and waist. The jacket has a peplum or flounce below the waistline. The front of the jacket has brass hooks and fabric eye fastenings. The back of the jacket has two tails. The jacket is lined and the shoulders are padded. It has been machine sewn and finished with hand stitching. A white card is tied with a ribbon inside and has an inscription. The poplin skirt on the jacket has been cut up to the waist at the side seams. There is an attached card with an inscription, handwritten in ballpoint pen.“Jenny” and “Mrs Sheila Handscombe, Wallaura, Jenny”flagstaff hill maritime museum and village, warrnambool, shipwreck coast, edwardian era, tailor-made, dressmaker, mourning outfit, handmade garment, mourning dress, death mourning, sunray pleats, sunburst pleats, western district victoria, mourning jacket

Clothing. Rounded neckline at the back, deeply scooped at front. Back fastens with 12 metal hooks and eyes. Back hemline is slightly shirred to nip in the 67 cm waistline, which is peaked at the cntre front. ''Leg-o-mutton'' type sleeves are gathered at the shoulder, and above the elbow, and finished with an 8 cm band of beading and sequin embroidery and a 4.5 cm black silk frill, and a frill of black lace, with an exquisite fruit and floral woven pattern. The neckline is trimmed with a deep lace and sequined silk overlay. Three velvet ''rosettes'' trim the centre front of the overlay. The silk bodice is shirred from just below the shoulders, to give fullness for the bustline sequins, tiny beads, velvet rosettes, silk chiffon frills.costume, female, black silk boned bodice with lace

Cream silk, woven in a jacquard style, featuring a floral design. Fully lined with cream silk satin. A 4cm deep, stand-up mandarin style collar. Eight metal hook and eyes fasten the front in a concealed way. Heavy cording, finished with pearl trimmed tassels,a double inverted pleat, 22cm long at the centre back hemline. Three darts at shoulders giving a 'sleeve-like' shape. Lower edges of which are elaborately corded. A 12cm'slit' at the lower edge seam with the front panel gives more flexibilty to the wearer. Tassel head and decorative 1.5cm ''ball'' are woven in a ''turks head'' style. A 2.5cm wide silk ribbon, attached at centre back, and possibly tied around the waist.A card with the cape is hand written - ''For Historical Soc.if wanted, From M.Bush's Collection. Could have been from Mrs. Mueller's. Gift from Mrs. E.G.JARRETT''costume, female, cream silk evening cape

Hurley, Sir Thomas Ernest Victor (1888-1958) was gifted this Probyn Williams inhaler in 1914. After studying at Melbourne University, Victorian-born Hurley was a Medical Officer at the Royal Melbourne Hospital until he commenced private practice in Collins Street. He was appointed Captain Australian Army Medical Corps, AIF and served in Gallipoli with the 2nd Field Ambulance. He served in Enypt, London, and the Western Front during World War 1. He gained a Companion of the Order of St George and St Michael in 1917. Upon return to Melbourne he held positions such as surgeon to Victoria Police (1928-1956), elected to Council of the Victorian branch of the British Medical Association, member of the Charities Board of Victoria and foundation member of the Royal Australasian College of Surgeons and chaired the Flying Personnel Research Committee m a consulting surgeon at the Royal Melbourne Hospital. This apparatus is transitional between Clover's and Hewitt's having Clover's narrow "ways" and compact size, but using Hewitt's ether-control lever.Black round topped box with brass hooks [missing] at front and brass hinges at rear. The initials T.E.V.H. are printed in gold leaf on the front. There is a black fabric handle on the top. Inside the box is black padding with the manufacturer's logo printed in gold leaf. There is a square section in the base of the box for holding the square clear glass bottle for ether. The pear-shaped mask is made of metal. There is also a metal ether measure for pouring the ether. The metal inhaler is ovoid shaped. The rotating gauge has a series of numbers engraved onto the inhaler for measurement. There is an elbow joint attaching a re-breather bag, with a small amount of waxy paper remaining attached with a thin ribbon. There is a small glass bulb encased in a metal housing. Printed in gold leaf on front of box: T.E.V.H. •Printed in gold leaf on inside lid of box: MAYER & MELTZER / LONDON / MELBOURNE & CAPE TOWN •Engraved on side of inhaler: PRESENTED / TO / T.E.V. Hurley Esq.,M.D.M.S. / by / THE M.S.S. / 15.6.14. •Engraved on reverse side of inhaler: PROBYN WILLIAMS / ETHER INHALER •Moulded into connector on elbow joint: MAYER & MELTZER •Stamped into base of metal pourer: MAYER & MELTZER / LONDON •Blue sticker with white printed text on front of inhaler: O.2.21.hurley, thomas ernest victor, probyn williams, university of melbourne, world war 1, wwi, gallipoli, australian army medical corps, medical student society, mayer & meltzer, clover, joseph, hewitt, fredrick william

Card board box containing 3 individual envelopes (originally held 6) that hold one piece transparent plastic eye shield visors mounted on leather band with felt forehead comfort strip held by 3 staples. At the end of the leather band two lengths of black elastic material straps with one having a small hook and the other having small ring and when joined secure the shield to the wearers head. The elastic bands are secured to the leather using press studs which clip into two studs in the plastic visor to make the visor fit around the wearers face. The cardboard box is made of heavy duty cardboard with opening at one end to access the envelopes. The envelopes are beige manila type and not sealed. On cardboard Box a label - EYESHIELDS,ANTI-GAS, MK11 AIR SPRAY Action to be taken within ten minutes in the following order to prevent blisters--. 1. COTTON WASTE: Swab liquid off exposed skin. 2. OINTMENT: Rub hard on exposed skin for 1 minute. 3. EYESHIELD: Change. 4. CLOTHING: If detector shows large drops, remove or cut away as necessary. If cape "worn" swab off liquid. SMALL drops :no action. 5. OINTMENT: Rub on skin now exposed. 6. DETECTORS: If possible, remove and renew. (Tippet or Armlet). 7. WEAPONS: Decontaminate. 8. OINTMENT: Re-apply to hands. A.F.A.& CO. 1941

This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles at the top. Both buckles are made of brass. The straps then tuck under four final leather loops, two of which are bolted to the legging with three corroded nails. Top of legging also carries a small brass hook.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war

Set of four Black and White photograph of recovery equipment for tramcars. Two prints of each except - .4 .1 - steel beam shown in position in the saloon portion of a tram used to secure a bogie to the body of tram with steel section over transom and showing lifting hooks and securing or lifting bolts. Shown in position where the tramcar body floor was above that of the tramcar transom. .2 - ditto, but on an angle in a wide body tram where the top of the transom matched the top of the floor. The bogies are on an angle. .3 - brackets in position for securing the body spring on the truck fitted to tram 980 to the body of the tram. .4 - brackets shown stored inside the cabin of the tram. Mid 1970's? Photographer likely MMTBtrams, tramways, recovery, accidents, tramcars, sw6 class, pcc class, w2 class, tram 980, st. louis b3

Mrs Martha Closter ( Kloster), of Oakleigh purchased the Melber Sewing Machine in 1909 and gave it to her daughter Mary when she and Alonzo Box married in 1918 and settled in Moorabbin Shire. This document was donated by a descendant of the Box family in 1985.William and Elizabeth Box purchased 'Box Cottage' in 1865 from a pioneer settler who had bought part of the land noted in Dendy's Special Survey 1841 Brighton. They raised their family there and established a market garden to supply produce to the population of Melbourne. Their nephew Alonzo married Mary Kloster/ Closter in 1918 and she brought with her this 'Melber' sewing machine that she used to provide clothing for the family The original, hand written, Guarantee for the Melber Sewing Machine purchased by Mrs Martha Closter of Oakleigh in July 15th 1909 at Powell & Candy, Importers of Chapel Street, Prahran, Melbourne. MEMORANDUM / From / Powell & Candy/ IMPORTERS / ‘ July 19th 1909 ‘ ( hand written) / To M / The Melbourne Sewing Machine / Exchange, / 154 CHAPEL STREET, PRAHRAN / Guarantee ( hand written) / “ We hereby guarantee the Melber Rotary Hook / Drop Head Sewing Machine Sold by us to / Mrs Closter of Oakleigh, to be free from defects / in regard to material & workmanship & will / make good any defects not caused “be” / accident, rough usage or neglect at any time / within Five (5) years of date of purchase . viz. / July 15th 1909. / All parts to be submitted to us at our place / of business for inspection before any claim / is allowed. / Powell & Candy / per ……..” ( all hand written ) victoria, melbourne, clothing, brighton, moorabbin, pioneers, sewing, box elizabeth, box alonzo, closter mary, oakleigh, kentucky, early settlers, america, craftwork, sewing machines, melber company, u s a, prahran, kloster martha

During the Great Depression from 1929 to 1932, rabbit trapping was a means of survival for many people. Rabbits provided meat and pelts which were sold for making felt hats such as the Akubra. Rabbit populations are controlled in the 21st century by poisoning, destroying or 'ripping' burrows (warrens), biological control with rabbit haemorrhagic disease and myxomatosis, and by shooting. Rabbit-proof fences also prevent the spread of rabbits into some areas. (ref. Powerhouse Museum) Steel-jawed rabbit traps were widely used in urban and rural Australia from 1880 to 1980. This trap is symbolic of the battle that Australians have waged against burgeoning rabbit populations for over a century. Rabbits cause enormous damage to Australian soils and biodiversity. The introduction of rabbits to this country was an environmental disaster.Two iron rabbit traps. Each consists of a pair of jaws held closed by spring tension and a triggering mechanism. When the trap is triggered the jaws close over the top of the bridge, plate and tongue mechanism that is designed to trigger the trap. A chain is attached by a hook on the bent end of the trap's spring with a long steel spike looped over the last link of the other end of the chain. The trap is designed so that the metal jaws snap shut against each other when the trap is activated by the application of weight to the pressure plate. In use, traps are set with open jaws, buried lightly just below the surface of the earth. When an animal steps on the pressure plate, the jagged teeth of the jaws snap around the animal's leg, usually breaking bone and sinew. Thus the animal is immobilised.rabbits rural trapping

During the Great Depression from 1929 to 1932, rabbit trapping was a means of survival for many people. Rabbits provided meat and pelts which were sold for making felt hats such as the Akubra. Rabbit populations are controlled in the 21st century by poisoning, destroying or 'ripping' burrows (warrens), biological control with rabbit haemorrhagic disease and myxomatosis, and by shooting. Rabbit-proof fences also prevent the spread of rabbits into some areas. (ref. Powerhouse Museum) This trap was used in the Orbost district. Steel-jawed rabbit traps were widely used in urban and rural Australia from 1880 to 1980. This trap is symbolic of the battle that Australians have waged against burgeoning rabbit populations for over a century. Rabbits cause enormous damage to Australian soils and biodiversity. The introduction of rabbits to this country was an environmental disaster.A rusted iron rabbit trap which consists of a pair of jaws held closed by spring tension and a triggering mechanism. When the trap is triggered the jaws close over the top of the bridge, plate and tongue mechanism that is designed to trigger the trap. A chain is attached by a hook on the bent end of the trap's spring with a long steel spike looped over the last link of the other end of the chain. The trap is designed so that the metal jaws snap shut against each other when the trap is activated by the application of weight to the pressure plate. In use, traps are set with open jaws, buried lightly just below the surface of the earth. When an animal steps on the pressure plate, the jagged teeth of the jaws snap around the animal's leg, usually breaking bone and sinew. Thus the animal is immobilised. rabbit-trap rural

Uniform issued to SGT. "McCLAREN M". Reg No. 3/52075 2 FLO REGT R.A.A. 1. Coat - khaki colour wool fabric uniform great coat. Double breasted with six buttons. Collar which fastens with buttons and metal hook and eye fastener. Shoulder epaulettes with button. Back has full length inverted pleat and lower vent with two buttons concealed closure. Buttons are gold coloured plastic with metal shank with raised emblem - crown over cannon carriages artillery. Double half belt with three buttons back at waist. Two front inset pockets with flap. Manufacturers stamp on light brown coloured cotton half lining, sleeves beige colour lining. 2. Beret - black colour wool felt with black colour cotton fabric lining and black colour leather trim. Two white cotton manufacturers labels inside on lining.Manufacturers infrmation. 1. Purple ink stamp "46/^" Black ink stamp "D^D". 2. Crown label - black embroidery "BERET/ Mnfrs/Pty Ltd/ Victoria/Australia. SIZE 7 1/2 " . Side label - black embroidery "REGIMENTAL NO/ NAME" Handwritten black ink "3/52075/SGT McLAREN. M./ 2 FLO REGT. R.A.A." uniform, army, great coat, m. mclaren

HMAS BENDIGO (J187) was an Australian made "Corvette" which served throughout WW2 until 'paid off' on 27 September 1946. The Bendigo Military Museum also holds the last ensign of HMAS BENDIGO, it has a large number of auto graphs. We also hold the wooden crest and Battle Honours Board, this is on loan for 5 years. Refer to Cat 4546 Ensign.1. This is a medium size ships bell. It is cast from Brass. It has a protrusion on the top with a hole in it, used for mounting. The words HMAS BENDIGO 1941 are engraved into the side and painted black. The exterior surface has a few pits, but has been polished numerous times. The interior surface is rough cast, with a large quantity of dints, where it has been struck by the clapper. 2. This is the clapper. There is a steel hook under which is a weight of steel. Under that is a ring. Suspended from the bottom ring is the rope handle. This is an excellent example of navy rope work. At the top of it is a metal ring. Under that is a white and red stylised crown. Under the 'headband' of the crown is a white rope handle with blue inserts. At the bottom is a large rope "Ball" with numerous rope threads of about 180mm length.ww2, ran, hmas bendigo

For Service History Refer Cat No. 7877.61. Jacket - white colour polyester viscose fabric, mess dress style - Summer. Collar and long lapels. Shoulder tapes for epaulettes. Gold colour plastic buttons with shank and metal pin. Raised emlem, crown and wings - RAAF. Lining - white colour polyester fabric. White cotton manufacturers label inside right side of jacket. 2. Shirt - white colour polyester/cotton fabric, dress shirt, collar, stiff front with buttonholes for studs and long sleeves with double cuff and buttonholes for cufflinks. White colour plastic buttons. White colour polyester manufacturers label, below collar inside. 3. Bowtie - black colour polyester/cotton fabric. Bowtie is prefolded and stitches on ribbon with black metal hook and ring closer.Manufacturers information - black ink print. 1. "ADI/ VICTORIA/ 1993^/ 8405-66-131. 8010/ SIZE 110R/ TO FIT CHEST 110/ SERVICE NO/ NAME/ 65% Poly 35% Visc/ Dry Clean Only". 2. "RA/ PHILIPPE ANTON/ MADE IN AUSTRALIA/ 44".uniform, raaf, mess dress, summer

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record..1) Brown leather Sam Browne belt fitted with a double clawed brass buckle. A brass stud and leather loop secure the free end of the belt tongue. A pair of brass rings are attached to the top edge of the belt for the attachment of the shoulder strap. A pair of squared “D”rings and a brass flat hook are located on the lower edge of the belt on the left side for the attachment of a sword frog. .2) Brown leather shoulder strap is attached at the front and rear of the belt by a brass stud and eyelet. Adjustment via a brass buckle. .3) Brown leather sword frog stitched on both sides with a brass “D” ring attached to the top. A brass post is placed at the centre where the supporting straps meet in a V. Two straps for attaching to the belt have two brass buckles for adjustment.sam browne, uniform, sword frog, kevin john herdman

Through the address on the box, this dress has a local connection. Miss Mavis Hedrick operated a dress salon at 162 Liebig St Warrnambool in the 1940's. Her parents lived at various houses in Warrnambool, including Skene, Spence and Princess Sts. She married John William Freeman in 1942 and left Warrnambool some time after that date. From wedding reports of the day it doesn't seem that this is Miss Hedrick's wedding dress. It seems more likely that it was purchased from her frock salon in Liebig St Warrnambool.While the owner and original wearer of this dress has eluded us, the dress has a strong link to Warrnambool through the original box with its identifying labels. The dress is very much in the style of the era of Miss Hedrick's dress shop..This cream silk wedding dress and slip was donated in original cardboard box with the address written in large letters on the front. The dress is cream silk with gold metallic trim in two lines across the bodice.There are silk covered buttons on the front and back of the bodice and it has a high rounded V neckline.It has long lily point sleeves .There is a side opening with hook and eye fastening.The skirt is cut on the cross and a small train flows from the back of the dress. A simple A line slip accompanies the dress. It has ribbon shoulder straps and the top is edged in a fine narrow lace. The large box is rectangular and grey in colour. The addressee's name is written in large lettering in black (possibly crayon) . A label is pasted to the top right hand corner. A Victorian Railways stamp is loose with the item.On the Box : Miss Hedrick Frock Salon Warrnambool On Label in top RH corner: Mollard & Williams 238 Flinders Lane Melbourne. Stamp: Victorian Railways Parcel stamp 8d Melbournewarrnambool, 1940's wedding dress, mavis hedrick, mollard and williams, 238 flinders lane melbourne, miss hedricks frock salon

This dress belonged to Dorothy May Mortlock (VF518245), who served as a Sapper with the Australian Women’s Army Service from 27 July 1945 to 1 August 1946.Light brown coloured woven cotton dress with button-up front secured by 6 metal buttons. Dress constructed of a skirt element attached to a short sleeve shirt-style torso section, a hook and eye sits on interior of two sections to fasten left and right sides together. One square topstitched pocket on the left chest and two angled hip pockets on front. Fabric belt with metal buckle held in place by fabric loops on both left and right side. Fabric epaulette passes through loop on both left and right side and secured with metal button. Two loops on interior left and right shoulders, left loop with inscription; woven label stitched to interior left side underneath which is a stamped motif.Ink inscription on interior loop difficult to read, “VF518245” and 5-6 indiscernible characters. Button reads “AUSTRALIAN MILITARY FORCES” below an embossed image of Australia with the King George V crown on top. Stamped motif reads “[broad arrow]/S.D.”women, wwii, world war two, second world war, australian womens army service, awas

This slouch hat belonged to Royal Australian Air Force serviceman/woman Forsyth. Khaki-coloured slouch hat with folded cotton band with blue strip around brim; gold coloured badge depicting a wreath with crown atop and ornamental letters “RAAF”. Four plastic eyelets at crow of hat and signature fold on crown. Wide brim edged with brown coloured binding. A hook on the left crown and left brim attach together to lift one side of the hat. On interior, brown leather chinstrap with metal adjustable buckle ad black leather sweatband stitched in with zig-zag black stitching and secured by khaki silk bow at back. Bow attaches a card reading “58” in a circle. Sticker on interior centre in brown and metallic gold. Size sticker hidden underneath sweatband reads “58 7 1/8”Label on interior of cotton band reads “A.G.C.F./VIC 1989 [broad arrow]/SIZE. 58/8405-66.[crossed out 109-5392]033-5309”. Handwritten on interior brim “FORSYTH”. Size labels read “58” and “58 7 1/8”. Sticker reads “COMMANDO/WOOL SLOUCH HAT/MELBOURNE”uniform, royal australian air force, raaf, r.a.a.f., slouch hat, 1980s

The Chancellor of the University of Ballarat in 2005 was Robert H.T. Smith. Blue soft covered annual book of 52 pages. The contents include, establishment of the University of Ballarat, the University Council, organisational Structure. Academic Board, Financial Summary, Technology Park, IBM regional Software, Eureka Encyclopaedia. Images include: University Council, Robert H.T. Smith, Kerry Cox, Maria Stickland, John McClure, Alla Wolf-Tasker, Henlen Kinlock, Michelle Mcfarland, Simone Heeney, Robert Hook, Garry Menz, Daniel Collings, Lynette Barr, Melissa Stojanovic, Dennis Olmstead, Clare Gervasoni, Dorothy Wickham, Geoffrey Blainey, Carolyn Taylor, Christine Nixon, Paul Lambeth, Bill Llwellyn, Betty Collier, Jennifer Elshaug, Helen Thompson. Krystal Newman, Joel Epstein, Gerrie Carr-McFieuniversity of ballarat, bracks, gervasoni, smith, cox, taylor,

This set of taps and dies tools was owned by Frederick William McDowell (Fred) (1880 to 15-6-1967). He was a wheelwright by trade. He made and repaired vehicles such gigs, buggies, jinkers, sulkeys, spring carts and farm wagons. His workshop was on the corner of Cramer Street and Raglan Parade in Warrnambool., previously the site of Fotheringhams, and after McDowell's, and still in 2023, occupied by Reece Plumbing Fred's workplace prior to retiring was at Bryant & Waterson's in Kepler Street, opposite the Criterian Hotel, making rubber tyred horse-driven farm wagons. This Wiley and Russell hand operated, thread cutting Die and Stock, or Die and Tap, set’s patent carries the description “The taper-headed screws adjust the size; the four side screws hold the cutters firmly in the holder. Marketed as the Wiley & Russell LIGHTNING SCREW PLATE. The taper-headed screws are carried over from the J.J. Grant October 21, 1871 patent (no. 120,266). This patent was improved by Smart's Oct. 21, 1884 patent (no. 306,783).” Dies are used to cut external screw thread, stocks are the tools that hold the dies in place with countersunk adjustable screws, and taps are the tools that make the internal threads. The tools would be used by farriers, blacksmiths, wheelwrights sailing and steam ship engineers for making new, or repairing old, threads in metal. WILEY AND RUSSELL Manufacturing Company The company Wiley and Russell was established in 1872 by Solon Wiley and Charles P Russell, whose uncle founded the J. Russell Cutlery Co. The company began with the purpose of manufacturing thread cutting tools in Green River U.S. This tap and die set is an example of tools used by blacksmiths, farriers, wheelwrights and engineers on sailing and steam ships. It is also an example of early U.S. made engineering tools.Tap, Die, Die Stock set of industrial tools, fitted inside original timber box with three instruction labels attached inside lid. The set is the “Wiley and Russell LIGHTNING SCREW PLATE Pat. Aug. 5, 1884”. The lid has three metal hinges and is secured by two metal hook and eye fittings. This set of Whitworth standard threads has metal die and stocks (seven), and taps (three - the case has provision for four more die). The manufacturer’s details and the sizes of the threads are impressed into the tools. The paper labels have instructions and a diagram for the use and care of the tools. Tools have a protective oil coating. Made by Wiley and Russell Manufacturing Co. of Greenfield, Massachusetts, U.S., c. 1884; the tools were patented in August 1884, U.S. Patent 303,060. “Wiley & Russell MFG.CO, Greenfield, Mass, Pat Aug 5 1884.” “WHIT. STD.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tap and die set, 1884 engineering tools, wiley and russell mfg co, lightning tap and die set, tap, die and stock set, screw thread cutting tools, taps and dies, stocks and dies, lightning screw plate, cutters, j.j. grant, patent no. 120266, solon wiley and charles p russell, wiley and russell, j. russell cutlery co, green river u.s, whitworth thread, fred mcdowell, frederick mcdowell, wheelwright, gig, buggy, jinker, sulkey, spring cart, farm wagon, 2-wheeled cart, horse cart, horse cart parts, jinker buggy, transport, vehicle, horse drawn, horse jinker, bryant & waterson

Clothing. Wedding Dress - Bodice.Cream coloured bodice of wedding dress. ''Japanese silk with transparent yolk of chiffon tucked Russian Body'' ( Quote from newspaper of the day).Long pintucked sleeves. Fine ribbon trim and bows at wrists. Two flounces of silk, trimmed with ribbon at elbows. Front panel fastened at side with metal hooks and hand made loops, to show a centre panel trimmed with chiffon frills. Pearl beaded motifs at front. Sash at waistline ties at the side - finished with pearl beading, and and a stand up chiffon collar. Worn by Mary Smith who was the daughter of Felix Smith. He built the Wycheproof Court House, Post Office and Royal Mail Hotel. Mary and John Keane lived in a mud brick house after they their marriage. See also 11400.75, & 11400.77.costume, female, wedding dress bodice

Cream coloured knee length dress of crimplene fabric. Fabric has all over pattern of horizontal rows of looped knot pattern. Fabric also has silver thread woven into fabric. Dress has a high round neckline both front and back. Dress is A line, with front having side darts at bust line and two 30cm darts – vertical on either side of centre front from bust line to hip line. At lower end of each dart is a false pocket flap (11cm x 5cm). Back opening from centre neckline has 54cm nylon zipper with hook and loop at neckline. Back has two vertical darts on either side of centre back. Dress has short set-in cap sleeves. Part of ensemble with 11400.521.Top inside back below neckline: Fashioned by Gina of Melbourne Registered TMS Crimplene. Made from terylene polyester fibre. Wash by hand or machine in warm water. Rinse thoroughly. Gently squeeze out surplus water. Drip dry.costume, female daywear, dress