Set of four Black and White photograph of recovery equipment for tramcars. Two prints of each except - .4 .1 - steel beam shown in position in the saloon portion of a tram used to secure a bogie to the body of tram with steel section over transom and showing lifting hooks and securing or lifting bolts. Shown in position where the tramcar body floor was above that of the tramcar transom. .2 - ditto, but on an angle in a wide body tram where the top of the transom matched the top of the floor. The bogies are on an angle. .3 - brackets in position for securing the body spring on the truck fitted to tram 980 to the body of the tram. .4 - brackets shown stored inside the cabin of the tram. Mid 1970's? Photographer likely MMTBtrams, tramways, recovery, accidents, tramcars, sw6 class, pcc class, w2 class, tram 980, st. louis b3

Mrs Martha Closter ( Kloster), of Oakleigh purchased the Melber Sewing Machine in 1909 and gave it to her daughter Mary when she and Alonzo Box married in 1918 and settled in Moorabbin Shire. This document was donated by a descendant of the Box family in 1985.William and Elizabeth Box purchased 'Box Cottage' in 1865 from a pioneer settler who had bought part of the land noted in Dendy's Special Survey 1841 Brighton. They raised their family there and established a market garden to supply produce to the population of Melbourne. Their nephew Alonzo married Mary Kloster/ Closter in 1918 and she brought with her this 'Melber' sewing machine that she used to provide clothing for the family The original, hand written, Guarantee for the Melber Sewing Machine purchased by Mrs Martha Closter of Oakleigh in July 15th 1909 at Powell & Candy, Importers of Chapel Street, Prahran, Melbourne. MEMORANDUM / From / Powell & Candy/ IMPORTERS / ‘ July 19th 1909 ‘ ( hand written) / To M / The Melbourne Sewing Machine / Exchange, / 154 CHAPEL STREET, PRAHRAN / Guarantee ( hand written) / “ We hereby guarantee the Melber Rotary Hook / Drop Head Sewing Machine Sold by us to / Mrs Closter of Oakleigh, to be free from defects / in regard to material & workmanship & will / make good any defects not caused “be” / accident, rough usage or neglect at any time / within Five (5) years of date of purchase . viz. / July 15th 1909. / All parts to be submitted to us at our place / of business for inspection before any claim / is allowed. / Powell & Candy / per ……..” ( all hand written ) victoria, melbourne, clothing, brighton, moorabbin, pioneers, sewing, box elizabeth, box alonzo, closter mary, oakleigh, kentucky, early settlers, america, craftwork, sewing machines, melber company, u s a, prahran, kloster martha

During the Great Depression from 1929 to 1932, rabbit trapping was a means of survival for many people. Rabbits provided meat and pelts which were sold for making felt hats such as the Akubra. Rabbit populations are controlled in the 21st century by poisoning, destroying or 'ripping' burrows (warrens), biological control with rabbit haemorrhagic disease and myxomatosis, and by shooting. Rabbit-proof fences also prevent the spread of rabbits into some areas. (ref. Powerhouse Museum) Steel-jawed rabbit traps were widely used in urban and rural Australia from 1880 to 1980. This trap is symbolic of the battle that Australians have waged against burgeoning rabbit populations for over a century. Rabbits cause enormous damage to Australian soils and biodiversity. The introduction of rabbits to this country was an environmental disaster.Two iron rabbit traps. Each consists of a pair of jaws held closed by spring tension and a triggering mechanism. When the trap is triggered the jaws close over the top of the bridge, plate and tongue mechanism that is designed to trigger the trap. A chain is attached by a hook on the bent end of the trap's spring with a long steel spike looped over the last link of the other end of the chain. The trap is designed so that the metal jaws snap shut against each other when the trap is activated by the application of weight to the pressure plate. In use, traps are set with open jaws, buried lightly just below the surface of the earth. When an animal steps on the pressure plate, the jagged teeth of the jaws snap around the animal's leg, usually breaking bone and sinew. Thus the animal is immobilised.rabbits rural trapping

During the Great Depression from 1929 to 1932, rabbit trapping was a means of survival for many people. Rabbits provided meat and pelts which were sold for making felt hats such as the Akubra. Rabbit populations are controlled in the 21st century by poisoning, destroying or 'ripping' burrows (warrens), biological control with rabbit haemorrhagic disease and myxomatosis, and by shooting. Rabbit-proof fences also prevent the spread of rabbits into some areas. (ref. Powerhouse Museum) This trap was used in the Orbost district. Steel-jawed rabbit traps were widely used in urban and rural Australia from 1880 to 1980. This trap is symbolic of the battle that Australians have waged against burgeoning rabbit populations for over a century. Rabbits cause enormous damage to Australian soils and biodiversity. The introduction of rabbits to this country was an environmental disaster.A rusted iron rabbit trap which consists of a pair of jaws held closed by spring tension and a triggering mechanism. When the trap is triggered the jaws close over the top of the bridge, plate and tongue mechanism that is designed to trigger the trap. A chain is attached by a hook on the bent end of the trap's spring with a long steel spike looped over the last link of the other end of the chain. The trap is designed so that the metal jaws snap shut against each other when the trap is activated by the application of weight to the pressure plate. In use, traps are set with open jaws, buried lightly just below the surface of the earth. When an animal steps on the pressure plate, the jagged teeth of the jaws snap around the animal's leg, usually breaking bone and sinew. Thus the animal is immobilised. rabbit-trap rural

Uniform issued to SGT. "McCLAREN M". Reg No. 3/52075 2 FLO REGT R.A.A. 1. Coat - khaki colour wool fabric uniform great coat. Double breasted with six buttons. Collar which fastens with buttons and metal hook and eye fastener. Shoulder epaulettes with button. Back has full length inverted pleat and lower vent with two buttons concealed closure. Buttons are gold coloured plastic with metal shank with raised emblem - crown over cannon carriages artillery. Double half belt with three buttons back at waist. Two front inset pockets with flap. Manufacturers stamp on light brown coloured cotton half lining, sleeves beige colour lining. 2. Beret - black colour wool felt with black colour cotton fabric lining and black colour leather trim. Two white cotton manufacturers labels inside on lining.Manufacturers infrmation. 1. Purple ink stamp "46/^" Black ink stamp "D^D". 2. Crown label - black embroidery "BERET/ Mnfrs/Pty Ltd/ Victoria/Australia. SIZE 7 1/2 " . Side label - black embroidery "REGIMENTAL NO/ NAME" Handwritten black ink "3/52075/SGT McLAREN. M./ 2 FLO REGT. R.A.A." uniform, army, great coat, m. mclaren

HMAS BENDIGO (J187) was an Australian made "Corvette" which served throughout WW2 until 'paid off' on 27 September 1946. The Bendigo Military Museum also holds the last ensign of HMAS BENDIGO, it has a large number of auto graphs. We also hold the wooden crest and Battle Honours Board, this is on loan for 5 years. Refer to Cat 4546 Ensign.1. This is a medium size ships bell. It is cast from Brass. It has a protrusion on the top with a hole in it, used for mounting. The words HMAS BENDIGO 1941 are engraved into the side and painted black. The exterior surface has a few pits, but has been polished numerous times. The interior surface is rough cast, with a large quantity of dints, where it has been struck by the clapper. 2. This is the clapper. There is a steel hook under which is a weight of steel. Under that is a ring. Suspended from the bottom ring is the rope handle. This is an excellent example of navy rope work. At the top of it is a metal ring. Under that is a white and red stylised crown. Under the 'headband' of the crown is a white rope handle with blue inserts. At the bottom is a large rope "Ball" with numerous rope threads of about 180mm length.ww2, ran, hmas bendigo

For Service History Refer Cat No. 7877.61. Jacket - white colour polyester viscose fabric, mess dress style - Summer. Collar and long lapels. Shoulder tapes for epaulettes. Gold colour plastic buttons with shank and metal pin. Raised emlem, crown and wings - RAAF. Lining - white colour polyester fabric. White cotton manufacturers label inside right side of jacket. 2. Shirt - white colour polyester/cotton fabric, dress shirt, collar, stiff front with buttonholes for studs and long sleeves with double cuff and buttonholes for cufflinks. White colour plastic buttons. White colour polyester manufacturers label, below collar inside. 3. Bowtie - black colour polyester/cotton fabric. Bowtie is prefolded and stitches on ribbon with black metal hook and ring closer.Manufacturers information - black ink print. 1. "ADI/ VICTORIA/ 1993^/ 8405-66-131. 8010/ SIZE 110R/ TO FIT CHEST 110/ SERVICE NO/ NAME/ 65% Poly 35% Visc/ Dry Clean Only". 2. "RA/ PHILIPPE ANTON/ MADE IN AUSTRALIA/ 44".uniform, raaf, mess dress, summer

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record..1) Brown leather Sam Browne belt fitted with a double clawed brass buckle. A brass stud and leather loop secure the free end of the belt tongue. A pair of brass rings are attached to the top edge of the belt for the attachment of the shoulder strap. A pair of squared “D”rings and a brass flat hook are located on the lower edge of the belt on the left side for the attachment of a sword frog. .2) Brown leather shoulder strap is attached at the front and rear of the belt by a brass stud and eyelet. Adjustment via a brass buckle. .3) Brown leather sword frog stitched on both sides with a brass “D” ring attached to the top. A brass post is placed at the centre where the supporting straps meet in a V. Two straps for attaching to the belt have two brass buckles for adjustment.sam browne, uniform, sword frog, kevin john herdman

Through the address on the box, this dress has a local connection. Miss Mavis Hedrick operated a dress salon at 162 Liebig St Warrnambool in the 1940's. Her parents lived at various houses in Warrnambool, including Skene, Spence and Princess Sts. She married John William Freeman in 1942 and left Warrnambool some time after that date. From wedding reports of the day it doesn't seem that this is Miss Hedrick's wedding dress. It seems more likely that it was purchased from her frock salon in Liebig St Warrnambool.While the owner and original wearer of this dress has eluded us, the dress has a strong link to Warrnambool through the original box with its identifying labels. The dress is very much in the style of the era of Miss Hedrick's dress shop..This cream silk wedding dress and slip was donated in original cardboard box with the address written in large letters on the front. The dress is cream silk with gold metallic trim in two lines across the bodice.There are silk covered buttons on the front and back of the bodice and it has a high rounded V neckline.It has long lily point sleeves .There is a side opening with hook and eye fastening.The skirt is cut on the cross and a small train flows from the back of the dress. A simple A line slip accompanies the dress. It has ribbon shoulder straps and the top is edged in a fine narrow lace. The large box is rectangular and grey in colour. The addressee's name is written in large lettering in black (possibly crayon) . A label is pasted to the top right hand corner. A Victorian Railways stamp is loose with the item.On the Box : Miss Hedrick Frock Salon Warrnambool On Label in top RH corner: Mollard & Williams 238 Flinders Lane Melbourne. Stamp: Victorian Railways Parcel stamp 8d Melbournewarrnambool, 1940's wedding dress, mavis hedrick, mollard and williams, 238 flinders lane melbourne, miss hedricks frock salon

This dress belonged to Dorothy May Mortlock (VF518245), who served as a Sapper with the Australian Women’s Army Service from 27 July 1945 to 1 August 1946.Light brown coloured woven cotton dress with button-up front secured by 6 metal buttons. Dress constructed of a skirt element attached to a short sleeve shirt-style torso section, a hook and eye sits on interior of two sections to fasten left and right sides together. One square topstitched pocket on the left chest and two angled hip pockets on front. Fabric belt with metal buckle held in place by fabric loops on both left and right side. Fabric epaulette passes through loop on both left and right side and secured with metal button. Two loops on interior left and right shoulders, left loop with inscription; woven label stitched to interior left side underneath which is a stamped motif.Ink inscription on interior loop difficult to read, “VF518245” and 5-6 indiscernible characters. Button reads “AUSTRALIAN MILITARY FORCES” below an embossed image of Australia with the King George V crown on top. Stamped motif reads “[broad arrow]/S.D.”women, wwii, world war two, second world war, australian womens army service, awas

This slouch hat belonged to Royal Australian Air Force serviceman/woman Forsyth. Khaki-coloured slouch hat with folded cotton band with blue strip around brim; gold coloured badge depicting a wreath with crown atop and ornamental letters “RAAF”. Four plastic eyelets at crow of hat and signature fold on crown. Wide brim edged with brown coloured binding. A hook on the left crown and left brim attach together to lift one side of the hat. On interior, brown leather chinstrap with metal adjustable buckle ad black leather sweatband stitched in with zig-zag black stitching and secured by khaki silk bow at back. Bow attaches a card reading “58” in a circle. Sticker on interior centre in brown and metallic gold. Size sticker hidden underneath sweatband reads “58 7 1/8”Label on interior of cotton band reads “A.G.C.F./VIC 1989 [broad arrow]/SIZE. 58/8405-66.[crossed out 109-5392]033-5309”. Handwritten on interior brim “FORSYTH”. Size labels read “58” and “58 7 1/8”. Sticker reads “COMMANDO/WOOL SLOUCH HAT/MELBOURNE”uniform, royal australian air force, raaf, r.a.a.f., slouch hat, 1980s

The Chancellor of the University of Ballarat in 2005 was Robert H.T. Smith. Blue soft covered annual book of 52 pages. The contents include, establishment of the University of Ballarat, the University Council, organisational Structure. Academic Board, Financial Summary, Technology Park, IBM regional Software, Eureka Encyclopaedia. Images include: University Council, Robert H.T. Smith, Kerry Cox, Maria Stickland, John McClure, Alla Wolf-Tasker, Henlen Kinlock, Michelle Mcfarland, Simone Heeney, Robert Hook, Garry Menz, Daniel Collings, Lynette Barr, Melissa Stojanovic, Dennis Olmstead, Clare Gervasoni, Dorothy Wickham, Geoffrey Blainey, Carolyn Taylor, Christine Nixon, Paul Lambeth, Bill Llwellyn, Betty Collier, Jennifer Elshaug, Helen Thompson. Krystal Newman, Joel Epstein, Gerrie Carr-McFieuniversity of ballarat, bracks, gervasoni, smith, cox, taylor,

This set of taps and dies tools was owned by Frederick William McDowell (Fred) (1880 to 15-6-1967). He was a wheelwright by trade. He made and repaired vehicles such gigs, buggies, jinkers, sulkeys, spring carts and farm wagons. His workshop was on the corner of Cramer Street and Raglan Parade in Warrnambool., previously the site of Fotheringhams, and after McDowell's, and still in 2023, occupied by Reece Plumbing Fred's workplace prior to retiring was at Bryant & Waterson's in Kepler Street, opposite the Criterian Hotel, making rubber tyred horse-driven farm wagons. This Wiley and Russell hand operated, thread cutting Die and Stock, or Die and Tap, set’s patent carries the description “The taper-headed screws adjust the size; the four side screws hold the cutters firmly in the holder. Marketed as the Wiley & Russell LIGHTNING SCREW PLATE. The taper-headed screws are carried over from the J.J. Grant October 21, 1871 patent (no. 120,266). This patent was improved by Smart's Oct. 21, 1884 patent (no. 306,783).” Dies are used to cut external screw thread, stocks are the tools that hold the dies in place with countersunk adjustable screws, and taps are the tools that make the internal threads. The tools would be used by farriers, blacksmiths, wheelwrights sailing and steam ship engineers for making new, or repairing old, threads in metal. WILEY AND RUSSELL Manufacturing Company The company Wiley and Russell was established in 1872 by Solon Wiley and Charles P Russell, whose uncle founded the J. Russell Cutlery Co. The company began with the purpose of manufacturing thread cutting tools in Green River U.S. This tap and die set is an example of tools used by blacksmiths, farriers, wheelwrights and engineers on sailing and steam ships. It is also an example of early U.S. made engineering tools.Tap, Die, Die Stock set of industrial tools, fitted inside original timber box with three instruction labels attached inside lid. The set is the “Wiley and Russell LIGHTNING SCREW PLATE Pat. Aug. 5, 1884”. The lid has three metal hinges and is secured by two metal hook and eye fittings. This set of Whitworth standard threads has metal die and stocks (seven), and taps (three - the case has provision for four more die). The manufacturer’s details and the sizes of the threads are impressed into the tools. The paper labels have instructions and a diagram for the use and care of the tools. Tools have a protective oil coating. Made by Wiley and Russell Manufacturing Co. of Greenfield, Massachusetts, U.S., c. 1884; the tools were patented in August 1884, U.S. Patent 303,060. “Wiley & Russell MFG.CO, Greenfield, Mass, Pat Aug 5 1884.” “WHIT. STD.”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tap and die set, 1884 engineering tools, wiley and russell mfg co, lightning tap and die set, tap, die and stock set, screw thread cutting tools, taps and dies, stocks and dies, lightning screw plate, cutters, j.j. grant, patent no. 120266, solon wiley and charles p russell, wiley and russell, j. russell cutlery co, green river u.s, whitworth thread, fred mcdowell, frederick mcdowell, wheelwright, gig, buggy, jinker, sulkey, spring cart, farm wagon, 2-wheeled cart, horse cart, horse cart parts, jinker buggy, transport, vehicle, horse drawn, horse jinker, bryant & waterson

Clothing. Wedding Dress - Bodice.Cream coloured bodice of wedding dress. ''Japanese silk with transparent yolk of chiffon tucked Russian Body'' ( Quote from newspaper of the day).Long pintucked sleeves. Fine ribbon trim and bows at wrists. Two flounces of silk, trimmed with ribbon at elbows. Front panel fastened at side with metal hooks and hand made loops, to show a centre panel trimmed with chiffon frills. Pearl beaded motifs at front. Sash at waistline ties at the side - finished with pearl beading, and and a stand up chiffon collar. Worn by Mary Smith who was the daughter of Felix Smith. He built the Wycheproof Court House, Post Office and Royal Mail Hotel. Mary and John Keane lived in a mud brick house after they their marriage. See also 11400.75, & 11400.77.costume, female, wedding dress bodice

Cream coloured knee length dress of crimplene fabric. Fabric has all over pattern of horizontal rows of looped knot pattern. Fabric also has silver thread woven into fabric. Dress has a high round neckline both front and back. Dress is A line, with front having side darts at bust line and two 30cm darts – vertical on either side of centre front from bust line to hip line. At lower end of each dart is a false pocket flap (11cm x 5cm). Back opening from centre neckline has 54cm nylon zipper with hook and loop at neckline. Back has two vertical darts on either side of centre back. Dress has short set-in cap sleeves. Part of ensemble with 11400.521.Top inside back below neckline: Fashioned by Gina of Melbourne Registered TMS Crimplene. Made from terylene polyester fibre. Wash by hand or machine in warm water. Rinse thoroughly. Gently squeeze out surplus water. Drip dry.costume, female daywear, dress

A Line cream coloured knee length coat of crimplene fabric. Fabric has all over pattern of horizontal rows of looped knot pattern. Fabric also has silver thread woven into fabric. High round neck with stand-up collar - 4.3cm. Two press studs at top below collar, plus one hook and loop to close the collar. Full length front opening with 4.5cm band. Five 2cm fabric covered buttons – evenly spaced from neckline to below hip line. Front has two side darts at bust line. Two false pocket flaps (14cm x 5cm) set at 45° angle to side seams at hem line. Long straight set in sleeves slightly tapered to the wrist. Part of ensemble with 11400.520.Top inside back below neckline: Fashioned by Gina of Melbourne Registered TMS Crimplene. Made from terylene polyester fibre. Wash by hand or machine in warm water. Rinse thoroughly. Gently squeeze out surplus water. Drip dry.costume, female daywear, coat

Clothing. Child's cream coloured waisted organza dress. U shaped neckline with 1.5 cm lace trim with eyelet edge. Silk ribbon (1cm) threaded through eyelet lace. Organza fabric and bows. Large bow pattern of on centre front of bodice, on each sleeve and four bows around skirt connected with trailing ribbon pattern. Front bodice has decorative vertical pin tucks.Back bodice has vertical pin stripes and lace strip inserts. Centre back opening (35 cm) fastened with ribbon at neckline and five metal hooks with cotton loops. Two horizontal strips of lace around waistline. Long straight sleeves trimmed with 1.5 cm lace at wrist. Hem is trimmed with 1.5 cm lace. Dress is unlined.costume, children's, child's cream coloured linen petticoat

Object. A 5 cm long ribbon, woven in a heavy weave, with a .75 cm red vertical stripe on each side, and a 1.5 cm vertical light blue stripe in the centre. Three .75 cm bands of brass metal - a shaped strip at top and bottom of the fabric, with a rectangular shaped clasp in the centre. These three clasps have decorative engraved patterns. The lower clasp- called a suspender, has a circular hook at the bottom, from which is suspended a circular brass fitting, holding a metal link, which is attached to a four sided shape, with letters in a circular shape - HTWSSTKS, Lodge symbols are on each side of this perspex shaped hanging. A 6 cm long pin attached to a loop on the top bar would fasten the badge to a suit jacket lapel, or other regalia.organisation, masonic lodge, brass and ribbon lapel badge

Coloured slide transparency. Image is of a male and a female standing together dressed in costume. She is wearing black pants and a blue and white striped top with a blue belt and sword around her waist and pink neckscarf. Her hat is a black tricorne with a white skull and cross bones insignia and she has a hook on her left hand. She is wearing a black eye patch and black beard and a pink parrot is on her left shoulder. He is dressed in dark pants, longsleeved top and short sleeved jacket. He has a beret with a feather on his head, a glass in his right hand and a stick in his left hand. On the lower edge of the white border the words Fancy Dress Party Mr and Mrs Robin? Physics led have been handwritten.Kodachrome Transparencyslide, bendigo, bendigo institute of technology

Wedding Dress. A very delicate, beautiful dress, in a very fragile state, worn over a satin petticoat(11400.1154). Lace bodice, and full length tapered, lace sleeves. Boat shaped neckline, outlined with a tulle insert, that brings the neckline to a high round neckline at the throat. This fastens with two metal press-studs on the left shoulder. This high yoke is edged at the bodice edge with an 8 cm deep frill of tulle, edged at both sides with a narrow frill of tulle, and sewn to the yoke to give a scalloped effect. Skirt is sheer and made from two layers of tulle. A band of lace, 9 cm deep borders the hemline, at knee level and at hip level. Three metal hooks and stitched loops fasten a placket on the left hand side.costume, female, cream tulle and lace wedding dress

A light ''camel coloured'' long silk skirt, with plain ''darted'' front and pleated fullness in the back. Two darts on either side of front, but some evidence that some alterations may have been made-possibly once three darts on either side, six pleats in back skirt. three either side of centre placket. Back waistband fastens with two metal hook and eyes. One metal press-stud in back placket appears as a later addition. Three 9cm deep bands on 1.5cm wide knife pleating circle the hemline. A band of ruched silk, edged with a band of 4cm deep lace is scalloped over the top layer of pleating. The lower edge of the skirt, under the pleated trim, has a lining of heavy cotton, cheesecloth, and muslin.costume, female, victorian skirt with pleating and lace

A school sampler from the 1930's, demonstrating a mastery of numerable sewing skills: Buttonholes- both bound;6 bound buttonholes. Button loop fastening 17 rouleau loops. Seams: Plain flat seam, machine stitched-part neatened by hand, and part neatened by machine. An overlapped flat seam-machine stitched. Fasteners: Press-studs (3) Buttons (4) shanked and f;flat. Metal hook-and-eyes (3), one eye hand stitched, all attached in buttonhole stitch. Pockets: (2) Machine stitched. Collar: (1) Rounded ''Peter Pan"" collar, with bound placket opening, one pearl button, and hand stitched loop. Facings (3). One square, one round, one Vshaped. Pintucks: 4 machine stitched pintucks.textiles, domestic, school needlework sampler 1930's

Deep round neck, front and back. Sleeveless. Armholes edged wit a two cm band of lace, featuring a diamond shaped geometric design. Lace is spoke stitched to the garment, and has a scalloped edge finish. Two bands of the lace edge - one 2.5cm wide, and one three cm wide. Where they are stitched together, a drawstring of stranded cotton enables the neckline to be gathered in. The lace is spoke-stitched to the fabric, and inserts in circular loops (2) and oval inserts (3) decorate the back across the bustling. One circular shape and two oval shapes decorate the back across the shoulders. Fine, machine stitched, french seams at side seams. Right side seam has a nine cm opening in the seam to the hemline, with a metal hook and hand stitched loop to fasten.costume, female, cotton and lace round neck camisole

NSWTD Railway Marker OIl lamp, No.1 RA Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil Lamp NSWTD Railway Marker lamp, No.1 RA made of metal and Glass Railway lamp, paraffin, metal/glass/fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870 - 1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTD 1 RApuffing billy railway , pbr, nswtd railway marker oil lamp, no.1 ra

Four NSWTD Railway marker Oil lamps at Nobelius Packing shed Item stamped numbers unknown Oil burning lamps have always been an important part of Australian railway signalling systems and have been used for communication, safety and lighting. It is called a marker lamp and was hung on rolling stock (carriages and wagons) such as the guard’s van to indicate the rear of the train at night. They were also used to indicate the rear of steam locomotive tenders for identification and safety purposes. This type of lamp was introduced to the railways around 1860 and continued to be used for over one hundred years. Oil lamps were phased out on the railways during the late 1960s and early 1970s, when they were replaced by battery lamps. Railway lighting included not only stations but yards, engines, rolling stock, signals, signal-boxes and crossings. There were a number of different types of lamps used for a variety of railway purposes. Historic - New South Wales Transport Department.- Railway Marker Oil LampFour NSWTD Railway marker Oil lamps made of metal and glass Railway lamp, paraffin, metal / glass / fabric, used for attaching to railway rolling stock to mark the end of the train, made by the New South Wales Transport Department, Sydney, New South Wales, Australia, 1870-1970 This lamp comprises a hollow cube of metal. One lens at the front transmits light from an interior light source. Fuel was either signal oil or kerosene. The burner inside the lamp used either cotton or felt wicks to create the light source. The lamp has a carry handle for carrying by hand and a bracket with a slot on the back for hanging onto the hook of a locomotive or item of rolling stock. It is marked "NSWTD" which stands for New South Wales Transport Department.NSWTDpuffing billy railway , pbr, four nswtd railway marker oil lamps

Joseph Butterworth COOMBS (1842-1901), was an accountant who founded a successful mercantile trading company. At the time of his marriage to Caroline Mary MICHEL in 1869, Coombs had already purchased ten acres of Studley Park. The acreage included land on the west of Fenwick Street that extended along lower Stawell Street to the corner of Yarra Street, all of it connected directly to the Yarra environs. A right of way to Studley Park Road was on the title, though Coombs went on to purchase more land, some of which faced Studley Park Road. In addition to owning the Studley Park acreage, Coombs later acquired 1,201 acres of land abutting the Acheron River. While retaining the Kew property he became a Taggerty Councillor and was Shire President for a time. J.B. Coombs died at Acheron Station in 1901 (aged 59 years). A few months after, tenders were called to repair the Kew dwelling, the Fenwick Street property now appearing in records with the name ‘Hope Mansell’. Caroline Coombs remained at Hope Mansell until she died in 1924, survived by three sons and five daughters. Not long after her death, advertisements appeared for the sale of the Studley Park land. The sale seems to have been a mechanism for distribution of the Estate, as the following year the original ten acre holding was transferred to members of the family. The eldest daughter Mabel married William Younger who, with his brother Alexander, developed Younger and Mackie Courts, both south of Studley Park Road. [Research: Kerry Fairbank]In 1961, the granddaughter of Joseph and Caroline Coombs, Mabel Isola (Younger) Grattan, donated ten 19th century dresses and parasols to the Kew Historical Society. The costumes, now known as the 'Coombs Collection', are the earliest recorded items of clothing to enter the Society's collection. Each of the items in the Coombs Collection, of which this item forms a part, is historically, aesthetically and socially significant. As a collection, the costumes includes outstanding examples of morning wear, day dresses, wedding dresses, and clothing accessories, providing evidence of outstanding dressmaker skills in Victoria during the mid to late Victorian period. One-piece, floor length blue silk day dress with a bell skirt that is slightly longer at the back. The dress is joined, centre-front with hooks and eyes. It is probable that the 19th century cream-coloured lace on the bodice and cuffs is a later addition. The lace extends in a long loop at the font of the skirt. The bodice has a high round neck, later modified to a V-shape. The dress must at one stage have been reconfigured or strengthened at the join of the bodice and skirt, as there is evidence of the use of new machine stitching. The dress is fully lined with a stiffened cotton lining fabric. Apart from minor staining, the dress is in excellent condition. The dress is the earliest complete costume in the collection. Measurements - 145.0 cm (centre back) 25.0 cm (waist, flat)Nilcoombs collection, fashion - 1860s, women's clothing, costumes, daywear

The dress was in the cupboard of Muriel Kerr, the donor's recently deceased mother. The donor remembers being shown it and trying it on in the late '70s or early '80s and being told that it belonged to her great-grandmother, Lilian Armstrong Ballantine (nee Power) [1887-1967]. Lilian Ballantine lived at 31 Harp Road (now the site of the Leo Baeck Centre) from the early 1920s to 1967. Lilian's married Archibald Dill Ballantine [1883-1947], in 1910. He was a member of the Monumental firm of A&G Ballantine, responsible for the Kew War Memorial (and possibly the Springthorpe Memorial). Lilian was highly involved with the Finlay McQueen Memorial Church [ie the East Kew Presbyterian Church]. Lilian's daughter, Mary (the donor's grandmother) married Alan McQueen, the son of Finlay McQueen, the first Minister of the East Kew Church. Mary Macqueen lived at 1 Oswin Street; she was a well-known artist. The dress is significant due to its associations with a family with strong connections, through a number of generations, to Kew East and its spiritual institutions. The garment's integrity and design also contribute to its aesthetic significance as a representative item of women's outerwear during the first decades of the twentieth century.Pale blue striped muslin single-piece dress with lace, tulle and embroidery at the neck and on the cuffs. The lace at the neck and cuffs is embroidered with coloured flowers, and edged with tulle. Bordering the v-neckline is a deeper blue guipure lace (possibly added later). There is a satin flower on the right side of the skirt which gathers the hem, exposing the deeper blue cotton underskirt. The dress has a narrow band of blue satin at the high waist. The cotton underskirt is attached by thread in places to the outer layer. Both the outer and under layers are attached with metal hooks and eyes. Edging the cuffs and hem of the dress is blue commercial fringing. The exterior of the dress has a slight brown tinge which is not apparent on the inside hem, suggesting that it has been discoloured through exposure. There are minor stains.women's clothing, edwardian dresses, lilian ballantine, australian fashion - 1910s, mary macqueen, finlay mcqueen memorial church, east kew presbyterian church, alan mcqueen, kew war memorial, archibald dill ballantine, leo baeck centre, 31 harp road -- kew (vic.), a&g ballantine, women's clothing -- 1900s, fashion - 1900s, fashion design

This dress is believed to have been worn on the Goldfields of Victoria. The discovery of gold in Victoria ranged between 1851-1879. This dress is believed to have been worn on the Goldfields of Victoria. There are few remaining examples of clothing worn on the Victorian goldfields.A circa 1878 two piece dress consisting of bodice (.1) and skirt (.2). The eau de nil (green) corded silk dress features a high round neckline that secures with hook and eye fastenings and decorative buttons through the length of the princess line bodice to the band around the hem. A watch pocket sits just below the waistline on the left hip. The three-quarter sleeves are narrow with kilted pleat trim on the lower edge and decorative buttons. At the back of the dress is asymmetric in its cut. The dress splits along the right hand side and finishes shorter with pleating and has a decorative pocket. A bow sits at the top of the split. The underskirt fastens on the left hip and features kilted pleats along the base of the skirt and train. The train features additional fullness created by a section of gathering in the centre.victorian goldfields, asymetrical victorian dress, princess line, 1870s fashion

Clothing. Women's black embossed silk skirt. Part of two piece set(bodice 11410.1). A shaped skirt with 2.5 cm cotton fabric waistband with three hanging loops attached. Centre back opening (20cm) fastened at waist with two metal hooks and eyes. Two metal eyes on waistband for attaching to the bodice. The front of the skirt has two vertical sections of appliquéd decorative beading (38 cm X 5 cm). The hem of the skirt is edged with black satin binding. The skirt is fully lined with brown cotton fabric. At centre back below the opening is an internal pocket (40 cm X 8 cm) of lining fabric. Historical Notes: This bodice and skirt belonged to Elizabeth Graydon (nee Richardson). Photograph of Elizabeth wearing this outfit (11410.3).

This original tunic or jacket is part of the full dress uniform of the pre-Federation Victorian Permanent Artillery regiment. Its owner had the rank of Sergeant, as indicated by the three inverted chevrons. The Artillery design of the badges and buttons indicate the date of the tunic to be from 1893 to 1903. However the maker of the tunic, W. Moncton, began manufacture in Melbourne in 1899, so this the tunic can be dated between 1899 and 1903. The donor's grandfather was given this tunic but not the name of the original owner. It has since been suggested to the family that the tunic was worn by a local Western District Light Horse member. This could very well have been the case because mounted troops were officially referred to as the Light Horse in the late 19th to early 20th century. Several local men were involved in the Light Horse during the First World War. The donor's grandfather wore this tunic in the local district when riding a penny farthing bicycle. The donor's father also wore the tunic when dressed as a 'Captain' hosting a local disco dance. BRIEF MILITARY HISTORY- The Crimean War began In 1854 and many people in colonial Australia were afraid of a Russian attack. Volunteer forces were established to strengthen the British Imperial troops posted here. A battery of artillery was raised in Victoria as well as in other Australian states. In 1870 Australia became responsible for its own naval and military defence. The Volunteer Corps and Victorian Navy shared the responsibility of defending the existing forts, assisted by volunteer coastal and mobile field batteries. The Permanent Victorian Artillery force was established. It was disbanded in 1880 then re-formed in 1882 as the Victorian Garrison Artillery Corps. In 1895 the Geelong, Warrnambool, Port Fairy and Portland Batteries became part of the Western District Garrison Artillery. Many of the volunteers who served in the Artillery were from rural areas. They belonged to rifle clubs and were experience horsemen as well. Australia's defence at this time relied on these mounted troops, or Light Horse men. In 1899 the Victorian Garrison Artillery Corps amalgamated with the New South Wales and Queensland Permanent Artillery to become the Victorian Regiment of the Royal Australian Artillery (RAA). Then prior to Federation, the RAA and the Permanent Artillery of South Australia, Western Australia and Tasmania all combined, becoming the Royal Australian Artillery Regiment with two Batteries of Field Artillery; Battery A from Sydney and Battery B from Melbourne.This original uniform tunic of the pre-Federation Victorian Permanent Artillery is significant for its association with Australia's military defence and the fortifications of our district, state and country. The tunic is also significant, representing part of the history and evolution of uniforms in the Australian military forces. The tunic is also significant in its representation of Australia's independence in forming its own defences. The tunic has local significance in its connection with local social events.Tunic or jacket, part of the full dress uniform of the pre-Federation Victorian Permanent Artillery operating from 1893 to 1903. Original, single-breasted tunic of dark blue wool, red piping trim, black cotton lining in body. Sleeves lined with blue striped, white cotton. Front closure has eight brass buttons. Red band-style collar with hook-and-eye closure has gold bullion braid trim and a brass badge pinned each side at the front. Upper right sleeve has three inverted chevrons on red fabric with gold bullion braid trim (rank of Sergeant). Both sleeves have gold bullion braid 'Austrian knot' emblems stitched onto lower arm, with ends finishing on the inner sleeve. Shoulder epaulettes have red piping and smaller brass buttons. Closed back vent has vertical scalloped design with six brass buttons, in two columns of three, and red piping trim. Brass belt hook is attached to the left back waist, close to the seam (right side has a mark indicating a previous similar clip). Inside left breast is a concealed pocket. Tunic has both machine and hand stitching. All brass shank-style buttons have matching Artillery emblems with inscriptions on the back. The two brass collar badges have additional artillery emblems of exploding grenade and star as well as an inscription. Buttons were made for W. Moncton, of Melbourne and marked with his name. He traded from 1899, dating the tunic to between 1899 and 1903.Button front: Artillery emblem on front (field cannon facing left, in front of a muzzle-loading ram rod). Button back: engraved "W. MONCTON . MELBOURNE ." Collar badges: Artillery emblem (field cannon facing right | stars | exploding grenade | "AUSTRALIA")flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, uniform jacket, uniform tunic, garrison volunteer uniform, fortifications in victoria, victorian permanent artillery, pre-federation military uniform, sergeant's uniform, jacket, militia, victoria, victorian volunteer forces, victorian regiment, royal australian artillery, raa, field gun, sergeant, w. moncton, garrison, dress uniform, tunic, scarlet collar, red collar, scarlet piping, red piping, gold bullion, artillery emblem, light horse, artillery, mounted troops, victorian garrison artillery corps