Signs - set of two Masonite signs - black print on 3mm Masonite sections used for the delivery of equipment to Preston Workshops and the Miller Street shops opposite. Possibly used for the delivery of equipment from overseas suppliers to both workshop locations. Both signs have 14 small nail holes around the perimeter.trams, tramways, mmtb, workshops, signs, equipment, delivery of tramcars

By 1910 revenue from the Beech Forest railway was $15,500, working expenditure $12,000, with a net loss (including interest charges) of about $4,000. This and the following year were the lowest net losses ever experienced. Passenger journeys rose steadily, outwards goods traffic rose to a record 12,959 tons (in 1911), and inwards goods traffic was a record 3,359 tons.. The railway station possessed a goods shed, stock race and yards, engine shed, coal stage, crew cabins, a refreshment room, and a four-roomed station building, with the station staff to match. Beech Forest was the principal despatch centre at this stage for split timber. Bill Devitt laid a timber tramway to the Beech Forest railway station to cart the palings for on-shipment..B/W. 177mm x 271mm. A general view from the eastern end of Beech Forest station in 1910. Note the Goods Shed, three tracks with No.3 Road having a NU louvre van and loaded NQR wagons, timber stacks to the left, and Devitt's Tramway with unloaded trolleys at the lower left. To the right, crew cabins with shops and houses in the background.beech forest; railways; timber; tramway;

Two foolscap sheets stapled in top left hand corner, Gestetner printed, titled "MMTB Engineering Department - Workshops and Running sheds Branch - Allocation of Tramcars January 1966", listing allocation of tramcars to various depots, workshops, storage and disposal (disposed / approved) Has numerous alterations shown in red or blue ink.trams, tramways, tramcars, mmtb, lists, depots, depot allocation

Copy of the Australian Railway Enthusiast - Vol 19, No. 3, September 1981 contains 6 photos under the titled "Ballarat - 10 years since closure". Also contains articles on Spain, the steam shunter at Junee known as Fanny, railways at Orange and Railways in the Blood by C. Henshaw. Photos by John Phillips, unless noted otherwise or Carolyn Dean or Mike Venn. 1 - No. 31, Victoria St bridge - see Reg item 405 or 2106 2 - No. 37 leaving Bridge St, entering Sturt St, front on shot 3 - No. 31, 12/9/1962 at Sturt and Lydiard St, photo by Mike Venn 4 - No. 14 and another single trucker in City Loop, see Reg Item 2016. 5 - Nos. 27 and 38 crossing at Wendouree Parade, May 1981 - see Reg Item 2787. 6 - No. 14, being driven by Tom Evans, opening the depot extensions, 19/9/1981 - Photo by Carolyn Deantrams, tramways, ballarat, closure, lydiard st, sturt st, victoria st, wendouree parade, btps, city loop, opening, bridge st

Yields information about the type and presentation of books or information folders that were sent to the Electric Supply Company of Victoria about tramway products available on the market and the company the produced them.Folder with 24 pages of advertising pamphlets bound into it with two metal clip binders advertising products available from the Railway Track-Work Company and titled ""Railway Track Equipment - Track Grinding Machines, Welding and Bonding Machines - Bonds, Welding Steel, Grinding Wheels and Blocks". Has brochures or pamphlets for: . The Universal Rotary Track Grinder . Reciprocating Track Grinder . The Atlas Rail Grinder . The Ajax Electric Arc welders .Vertical Rail Lifter . The Jackson Electric Tie Tamper. Generally the lead page of each pamphlet has been imaged. Provides a description of each item, along with method of operation and parts listing generally. The folder has on a number of pages and the back cover, a sticker from Frank R. Perrot (Now Perrot and Adams Ltd), Machinery Merchant of 394 Kent St Sydney. Railway Track-work Company , Clementine, Thompson and Mercer Sts, Philadelphia, Pennsylvania USA. For a full scan of the document see the hi res file.Numerous: Front cover sticky label "1620" in top left hand corner, "Mr Pringle" on front cover and stamp with words "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on front cover. Inside front cover has a pencil note, behind the crease in the bottom right hand corner. On the first pamphlet "Ballarat Tramway Preservation Society Catalogue No. 10" in ink on top right hand corner. On parts page for the Reciprocating Track Grinder has the "Perrot and Adam Ltd" company stamp.trams, tramways, trackwork, equipment, rails

Receipts for rates payable to the Heidelberg and Eltham Railway Construction Trust, 1916. Owners are Benjamin Partington and William Partington.Copy of receiptswilliam james partington, benjamin partington, heidelberg and eltham railway construction trust, hurstbridge rail line

Set of two typed reports detailing Preston Workshops. .1 - Report - marked draft, dated 24/11/1926 - 4 foolscap pages with marks, corrections, changes outlining the need for a workshop, refers to the Malvern depot, acquisition of the land, design, capacity, description of the various shops. Gives a description of the operation, construction of trams in the future, notes the cable repair shops at Nicholson St, cranes, employee numbers, costs, paint and body shop. Notes the mess room and that an ambulance room will be provided. .2 - Report - 3 quarto pages - undated - but based on the first sentence, c1929 - titled "Tramway Workshops Preston". Gives a description of the workshops, the main groupings, building sizes, cranes, floors, building and maintenance capacities, tracks, admin block, employment, sub-station and power supplies.In top right hand corner of each sheet of .1 "Reference RS 49/1" stamp and handwritten.trams, tramways, preston workshops, malvern depot, nicholson st, workshops, workplace conditions

Colour photograph of the train turntable and William G. Pert Railway Workshops of the Diamond Valley miniature railway. A number of locomotives are visible.eltham, diamond valley railway, eltham lower park

Standard Victorian Railways Louvre Van one of 905 built. Built at Newport Workshops in February 1st1952. U1422 is one of the last batch of this design of van built at Newport between September 1951 and May 1952. The first of these vans was built in January 1908 as a lengthened of all steel louvre van was introduced in 1897. This Van is now the only surviving complete example of the long wheelbase louvre van which was a major part of the Victorian Railways from 1908 until 1988. These Louvre Vans would have been a common site at the Echuca Wharf. Although it is a relatively late example of its type.Standard Vic Railways Louvre Van U Classwharf, shire of campaspe, newport workshop, barred door, rollingstock collection, steam trains

This Victorian railways constructed turntable is used for turning around locomotives. It is 16.2 meters long and is hand pushed either direction. Originally broad gauge (5 foot 3 inches) and located in the Newport Locomotive workshop area it was relocated to emerald and 2-foot 6-inch railway track fitted to it and is used by the Puffing Billy Railway to turn their locomotives and carriages Historic - Victorian Railways - Turntable used at Newport Narrow Gauge Turntable made of metal and steelturntable, victorian railways, puffing billy, emerald, newport

A4 photocopied sheet providing the location of tramcars at Preston Workshops, dated 22-5-1998. Has notes whether in for "day in" or "accident repairs".trams, tramways, preston workshops, lists

Pamphlet - double sided A4 sheet on semi gloss paper, titled "Alstom Ballarat Railway Service Centre", detailing Alstom Ballarat workshops at the former Victorian Railways Ballarat North Workshops. Has a number of photographs of their work.trams, tramways, alstom, ballarat north, vr, workshops

Yields information about a tour by a Melbourne private schools tour to Ballarat in 1961 and the costs.Top part of a booking form, Gestener printed, for a tour to Ballarat - "Victorian School Railway Clubs' Association - Ballarat Tram Tour", for the 23/7/1961. Gives details of the tour, trains, and times. J.R. Brady noted as Secretary. See Reg Item 7092 for a report on the tour and 2137 for a photograph of the tramcar.trams, tramways, tours, vsrca, ballarat, booking form

Photocopy on A3 paper of a MMTB report titled "Rolling Stock Branch - Preston Workshops Staff Position as at 30-4-54". Showing the staff both officers and tradesmen, apprentices, establishment numbers and actual numbers of employees at Preston Workshops. Establishment was 683, actual number 613. Signed by the Rolling stock Engineer - report to the Chief Engineer. Not known when copy made.trams, tramways, mmtb, preston workshops, personnel

.1 - A4 photocopied sheet providing the location of tramcars at Preston Workshops, dated 8-12-1988 .2 - "Tram Maintenance and Construction Department Daily Tram Summary Friday 9 December 1988" - showing class, depot, peak, allot, available, spares in workshops, and number of unserviceable cars. Also lists trams for transport, stock, and total number of cars.trams, tramways, preston workshops, lists

Print of photograph of Camberwell Railway Station looking west. Inscription states 'Camberwell Victoria, view of the railway station, c. 1930' Camberwell Victoria, view of the railway station, c. 1930camberwell

Digital Image of the Preston Workshops Office block and "Cameron Hall" from Miller St Preston or Northcote. Shows the track layout and road condition in front of the offices.trams, tramways, preston workshops, miller st

This type of trolly is known to date from prior to 1910 and were in use before petrol engines were used to transport workmen along the railway lines. The exhibit was located at Colac in 1961, after being used on the Colac to Beech Forest and Crowes narrow gauge railway. This type of trolly was built in two versions; one for the Victorian Railways broad gauge lines, and one for the narrow gauge lines.Historic - Victorian Railways narrow gauge - track work vehicle. This vehicle was used in the days before petrol engines were used to drive vehicles transporting workmen along the railway line.C2N Type Trolly - Victorian Railways Gauge 2'6" Trolly Has a flat piece of wood that you would stand on with four metal wheels, one under each corner.c2n, trolley, victorian railways, hand power, narrow gauge, puffing billy, trolly

This carriage forms part of a matching set of the W classification which were built to match each other around 1914Second class railway carriage red in colour with a white clerestory roof. It has 7 compartments each with two green vinyl bench seats. Pressed metal ceilings with a light in the centre and racks above the seats. There is a men's toilet at one end of the carriage and a ladies toilet at the other end, with a double seat outside both toilets as a waiting area. In these areas there are several Art Nouveau pressed metal panels. The outside of the carriage has the numbers 2 BW painted on the side.

Book - 16 pages, centre stapled, with four punch holes on the left hand edge titled "Statutory Rules 1983 - Transport (Workshops Management Board Election of Members) Regulations 1983", issued under the transport Act 1983, for the election of Members to the Workshops Management Board, operated by the State Transport Authority. Gives extensive details of the election process, nominations. Rule - dated 2/8/1983.trams, tramways, state transport authority, workshops, elections, board members

Digital Image of the machine shop at Preston Workshops c1943. Shows the nature of the work positions, the belt drives and some of the equipment provided. Image made from a published print.trams, tramways, preston workshops, tramcar construction

Digital Image of the Preston Workshops truck shop 1946 with No. 15 trucks under construction and No. 1 trucks in the background undergoing repairs. Image made from a published print.trams, tramways, preston workshops, bogies

Part of a matching set of W class carriages.First Class railway carriage 35 AW red with a white clerestory roof. Six compartments each with six green possibly leather studded seats with arm and head rests. The floor is carpeted and there is a white metal drinking fountain with a tap in the corridor. Each compartment also has decorative pressed metal ceiling, overhead racks and a central light fixture. There is a mens' and ladies' seating area at each end with a toilet.The carriage has the 35AW mark on the outside.

Copy of the Australian Railway Enthusiast - Vol 32, No. 2, June 1994 which has an extensive photographic article on the Bendigo Tramways written by William F. Scott. Gives the origin of the city, first tramway, battery trams, steam trams, electrification, operation by ESCo, SEC takeover, closure, operation by the Bendigo Trust, maps and a list of the Bendigo Trust fleet. Front cover photograph of SEC cars 24 and 26 crossing on the Eaglehawk line.trams, tramways, bendigo, steam trams, battery trams, esco, sec, bendigo trust

On the 1st March, 1959, the first special train was organized by the Australian Railways Historical Society in conjunction with the Kanyana Festival Committee of Colac, Victoria. It proved so popular that additional trains were later organized. Temporarily in storage at Newport railway yards eight NBH excursion carriages were transferred to Colac which ran on the special trains until early-1962. A A.R.H.S. "Kanyana" special excursion locomotive G41, an NC guard's van and NBH excursion carriages at halts at Gellibrand while the fireman attends to the engine requirements (or 'ER' in railways' parlance). The passengers are milling outside the excursion carriages while two are talking to the driver. Houses are in the background. B/W.gellibrand; railways; kanyana special; colac; beech forest; loco g41;

Yields information about a tour by a Melbourne private schools tour to Ballarat in 1961 and the costs and the Schools club association.Magazine - 14 quarto pages, Gestetner duplicated stapled on left hand side titled "Railway Club Review Vol. 3, No. 4" with a photo of an VR AEC rail motor on the front. Contains a listing of the club committee, news from the various school club, coming trips, articles including a report on the trip to Ballarat and visiting the tram system. See also Reg items 6668 for the tour booking form and 2137 for a photograph of tram 32.trams, tramways, tours, vsrca, ballarat, booking form

Magazine - "Australian Railway Enthusiast - Vol 31, No. 1, March 1993", 24 pages, centre stapled, with a front cover colour photo of VR 36, Ormond Road, about to cross the Point Ormond line. Contains a detailed article on both the VR lines by Jim Seletto, featuring photos of 39, 30, 53, 49, MMTB 675 and a colour photo of VR 49 on the rear. Contains maps and diagrams of St Kilda Station. Includes Sandringham and Black Rock line. Published by the ARE.trams, tramways, vr trams, st kilda brighton tramway, sandringham, black rock, maps, st kilda, railways, tram 39, tram 30, tram 53, tram 49, tram 675

Upwey Station Sign; Upwey Railway Station is located on the Belgrave line in Victoria, Australia. This railway serves the Eastern region of Melbourne. Upwey Railway Station opened on the 3rd of June 1901. Upwey Railway Station has a crossing loop in the middle of a six kilometre section of single railway track between Ferntree Gully Railway Station and Belgrave Railway Station. The station was originally on the Upper Ferntree Gully to Gembrook narrow gauge line. The Upper Ferntree Gully to Gembrook Narrow Gauge railway line officially closed on the 30th of April 1954. It saw further use between 1955 and early 1958, when trains were operated by the Puffing Billy Preservation Society in co-operation with the Victorian Railways. The Upper Ferntree Gully to Belgrave section was converted to Broad Guage and re-opened on the 19th of February 1962. This station sign shown here was one of a number used on the Upwey Railway Station while it was Narrow Gauge. Historic - Victorian Railways Station sign used at Upwey StationUpwey wooden rectangle Station name sign pained yellow background with black font.Upweypuffing billy, station sign, upwey station, victorian railways