.1) Shaving mirror leather wallet, brown colour rectangular shape. .2) Shaving mirror, polished metal, has inset at top to hang on a hook or other..2) stamped, “Chromium plated - made in England”shaving, mirror, wallet

This small Braille teaching cube attached to a keyring can be used to make the shapes of Braille characters. The surface of cube is studded with large black rivets and when the three main parts of it are rotated, the shapes of a single braille character can be seen and felt. The cube features raised dots in 3 independently revolving sections. These can be turned to form different Braille letters for teaching purposes. 1 bright yellow Braille keyring cube with black dots on itbraille equipment, education aids and devices

The strips show the mark or hole shape for each ticket punch at Essendon Depot. The set of four sheets, for punches numbered 1 to 200 are dated 8/12/73. The second set, for punches numbered 1 to 225 have the same matching punch shapes as the first set but are undated. The second set could possibly be an earlier set when there were more conductors at Essendon. Demonstrates a record of each ticket punch mark or shape against the ticket punch number.Set of 9 card strips, which have been punched for each numbered ticket punch at Eassendon Depot.Set 1 of 4 has "As at 8/12/73" on the base of the first sheet and the first four have been stamped "Essendon" on the top of each sheet.tramways, mmtb, tickets, conductors, outfits, ticket punches, essendon depot

This spoon, made by William Page & Co., is electroplated nickel-silver and was recovered during the late 1960s to early 1970s from an unnamed shipwreck along the coast of Victoria. The shipwrecks in the area range from around the 1840s to the early 1930s. The spoon is part of the John Chance Collection. This spoon is likely to have been recovered be from the wreck of the Loch Ard (1873-1878) as other cutlery in the Flagstaff Hill’s Shipwreck Collection made by William Page was also recovered from the Loch Ard. The ship’s Manifest included a large quantity of cutlery. Also, other objects in the John Chance Collection were also recovered from wreck of the Loch Ard. In the mid-1800s electroplated cutlery became a popular substitute for the traditional but more costly sterling silver pieces. The ‘new’ cutlery was made from a more common base metal, such as nickel or a nickel alloy, then electroplated (coated) with a very thin layer of silver. The eating utensils looked like the expensive, pure silver version but eventually, through use and wear, the base metal would show. Some producers warranted their electroplated silver to be ‘white throughout’. WILLIAM PAGE & CO., BIRMINGHAM, ENGLAND - Although the electroplated cutlery of William Page & Co. was made in Birmingham, it does not include the embossed Birmingham Assay’s mark of an ‘anchor’ because the metal used for the spoons is not silver. William Page used various Maker’s Marks on his cutlery. The pattern of five embossed marks on this spoon is a typical example, with the embossed sunken crown containing ‘W P’ being the first in the column of symbols. - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamond William Page established his business in 1834, according to the text around a printed Trademark. The firm William Page & Co. began electroplating in 1855, and from 1880 it operated from Cranemore Street, Cattle’s Grove and also at 55 Albion St, Birmingham. The firm registered a new Trademark [‘W P’ within a diamond boarder within a sunken diamond] in 1897; previously the Mark were the initials WP within a crown, but the British legislation prohibited the use of a ‘crown’ mark on electroplated ware in 1895. In 1936 the firm became William Page & Co. Ltd and became a supplier of spoons to the British Government in 1938, marking its products with the ‘broad arrow’ symbol. The firm also traded with the brand names Armour, Asrista, Bolivian Silver, Roman Silver, Roumanian Silver, Silverite and Trevor Plate. Although this spoon is not linked to a particular shipwreck, it is very likely to have come from the wreck of the Loch Ard; the ship’s Manifest includes a large quantity of cutlery. Regardless, it is recognised as being historically significant as an example of cutlery carried onboard a ship as either personal belongings or cargo and brought into Colonial Victoria in the 19th to early 20th century; through this we have added opportunity to interpret Victoria’s social and historical themes of those times. The spoon also has significance for its connection with many similar William Page pieces of cutlery in our collection that were recovered from the wreck of the sailing ship Loch Ard (1873-1878). William Page & Co. of Birmingham is one of the renowned 19th century manufacturers and electroplaters and was supplier of spoons to the British Government in 1938. The spoon has added significance, as it was recovered by John Chance, a diver of wrecks, including the Loch Ard, in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Spoon; teaspoon, electroplate nickel-silver, discoloured to green and red-brown in places. Fiddle design. Bowl has indents and holes. Five embossed Maker’s Marks on back of handle, arranged in a column from tip towards bowl. Made by William Page and Co., Birmingham. The spoon no longer has its silver plating. The surface has encrustations. Bowl has nicks, indents and holes. Stem is very bent at the shoulder. Discoloured to green and red-brown in places. Embossed Maker Marks - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamondflagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, loch ard, cutlery, flatware, silverware, tableware, eating utensils, dining, spoon, electroplated cutlery, william page & co, william page & co. ltd., birmingham plate, silversmith, antique, vintage, fiddle design, fiddle pattern, teaspoon

This spoon, made by William Page & Co., is electroplated nickel-silver and was recovered during the late 1960s to early 1970s from an unnamed shipwreck along the coast of Victoria. The shipwrecks in the area range from around the 1840s to the early 1930s. The spoon is part of the John Chance Collection. This spoon is likely to have been recovered be from the wreck of the Loch Ard (1873-1878) as other cutlery in the Flagstaff Hill’s Shipwreck Collection made by William Page was also recovered from the Loch Ard. The ship’s Manifest included a large quantity of cutlery. Also, other objects in the John Chance Collection were also recovered from wreck of the Loch Ard. In the mid-1800s electroplated cutlery became a popular substitute for the traditional but more costly sterling silver pieces. The ‘new’ cutlery was made from a more common base metal, such as nickel or a nickel alloy, then electroplated (coated) with a very thin layer of silver. The eating utensils looked like the expensive, pure silver version but eventually, through use and wear, the base metal would show. Some producers warranted their electroplated silver to be ‘white throughout’. WILLIAM PAGE & CO., BIRMINGHAM, ENGLAND - Although the electroplated cutlery of William Page & Co. was made in Birmingham, it does not include the embossed Birmingham Assay’s mark of an ‘anchor’ because the metal used for the spoons is not silver. William Page used various Maker’s Marks on his cutlery. The pattern of five embossed marks on this spoon is a typical example, with the embossed sunken crown containing ‘W P’ being the first in the column of symbols. - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamond William Page established his business in 1834, according to the text around a printed Trademark. The firm William Page & Co. began electroplating in 1855, and from 1880 it operated from Cranemore Street, Cattle’s Grove and also at 55 Albion St, Birmingham. The firm registered a new Trademark [‘W P’ within a diamond boarder within a sunken diamond] in 1897; previously the Mark were the initials WP within a crown, but the British legislation prohibited the use of a ‘crown’ mark on electroplated ware in 1895. In 1936 the firm became William Page & Co. Ltd and became a supplier of spoons to the British Government in 1938, marking its products with the ‘broad arrow’ symbol. The firm also traded with the brand names Armour, Asrista, Bolivian Silver, Roman Silver, Roumanian Silver, Silverite and Trevor Plate. Although this spoon is not linked to a particular shipwreck, it is very likely to have come from the wreck of the Loch Ard; the ship’s Manifest includes a large quantity of cutlery. Regardless, it is recognised as being historically significant as an example of cutlery carried onboard a ship as either personal belongings or cargo and brought into Colonial Victoria in the 19th to early 20th century; through this we have added opportunity to interpret Victoria’s social and historical themes of those times. The spoon also has significance for its connection with many similar William Page pieces of cutlery in our collection that were recovered from the wreck of the sailing ship Loch Ard (1873-1878). William Page & Co. of Birmingham is one of the renowned 19th century manufacturers and electroplaters and was supplier of spoons to the British Government in 1938. The spoon has added significance, as it was recovered by John Chance, a diver of wrecks, including the Loch Ard, in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value.Spoon; teaspoon, electroplate nickel-silver, silver discoloured to brown. Fiddle design. Five embossed Hallmarks. Five embossed Maker’s Marks on back of handle, arranged in a column from tip towards bowl. Made by William Page and Co., Birmingham. The spoon no longer has its silver plating. Bowl has a cut in the side, and is nicked and dented. Embossed Maker Marks - ‘W P’, within raised diamond outline, within sunken crown - ‘Cross above Triangle’ symbol within sunken oval - ‘Maltese Cross’ symbol within sunken, six-sided shape - ‘crab-like’ symbol within sunken oval - ‘R D’ within sunken diamondflagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, loch ard, cutlery, flatware, silverware, tableware, eating utensils, dining, spoon, electroplated cutlery, william page & co, william page & co. ltd., birmingham plate, silversmith, antique, vintage, fiddle design, fiddle pattern, teaspoon

Take part in LaTrobe University's next phase of testing and help shape the future of transport in Victoria wit a ride in a driverless bus.News article 1 page, black text and colour image .latrobe university, driverless bus

Food covers were used to cover food and protect it from insects. This food cover is a simple shape and would be a domestic utensil.This food cover is an example of a simple kitchen item used in the late 19th-mid 20th century.Small black metal meat cover with small handle.food-storage domestic kitchen

Badge of Tilly Aston replicated from a photograph of her during her teenager/early adulthood. Rectangle in shape with a bronze background. 1 plastic badge with image of Tilly Astonassociation for the blind, badges, tilly aston

These brooches were made by Hans Beck, a German Templer who was born and lived in Palestine. When WWII broke out, he was sent to Australia on the "Queen Elizabeth" in 1941 and interned in Tatura Camp 3. His wife and children were left behind in Palestine. His daughter Ingrid said that although they were behind barbed wire, they were safe. Hans worked as a manufacturing jeweler in Sydney after his release from Internment. He sent for his family on 1947. A 1 x wooden triangular shape with a small four petal flower made of tiny white shells. A metal stick pin is attached to the back. B 1 x wooden heart shape. Two flowers on stems made from small pink shells. Each flower has five petals. A group of four tiny white shells sit between the flowers. A vase is carved into the bottom of the heart. A small safety pin in attached to the back. C 1 x wooden oval shape. Group of three pink shell flowers on green stems. Two flowers have six petals and a centre made from shells. The centre flower has only one petal. A bow of tiny white shells at the base of the brooch. Small safety pin attached to back. D 1 x wooden round shape. A cluster of shells in a floral pattern. A small bright red shell in the centre of cluster. Pin on the back is broken. E&F 2 x wooden round shape. A cluster of small shells in a floral pattern. One dark wood, one lighter coloured wood. handmade, brooch, shell, beck, queen elizabeth, templer

The pins in this collection vary in the timber used and the design. They were found in a warehouse beside Crown Casino in Melbourne, located along the Yarra River, close to the sailing ship "Polly Woodside" and not far from the docks of Port Melbourne. Some of the pins have the mark of a 'Broad Arrow' with 'D ↑ D, which signifies that they were the property of the Australian Government's Department of Defence. Belaying pins are essential equipment on a traditional sailing ship of the 19th and early 20th centuries. They are usually made of wood but some are metal. A belaying pin is used to secure the running ropes of the rigging to the ship's rails using holes drilled onto the rails for that purpose. The belaying pins are inserted into holes in the ship’s rail, drilled for that purpose. When the sail has been raised, the ropes are wrapped around the upper and lower sections of the pins in a figure-eight pattern. The shapes of these belaying pins taper from the rounded end of the handle inwards towards the bottom, which allows them to have a firm fit into the holes in the rails. The rigging rope is wound around the pins in such a way that a tug on the pin's handle pulls it out of the hole and quickly frees the rope and the sail.These belaying pins are significant for their association with sailing vessels, particularly vessels of the late 19th and early 20th centuries. They are also significant for their association with the Port of Melbourne where sailing ships docked to and from the Port of Melbourne. Some of the pins have additional significance for being connected with the Australian Government's Department of Defence.Belaying pin, wooden, simple design, wooden shaft with a wider rounded end on top third, tapering to the centre third, which is wider than a lower third. The bottom has a blunt base. Some of the pins have the three sections divided by a line around their circumferences. This collection of fifty-seven pins of varying shapes, colours and timber. Some of the pins are stained with colour, and some have been left natural Stored in a wooden crate. Some have inscriptions.Marks: (Government Defence Department Broad Arrow) "D ↑ D"sailiing equipment, nautical equipment, rigging, yards, flagstaff hill, maritime museum, maritime village, belaying pin, broad arrow, australian government, australian department of defence, sailing ship, sail

These scales come from the Nullawarre Post Office. Nullawarre is a small settlement 25 kilometres south east of Warrnambool. The area was settled in the late 1860s and 1870s and the first school was opened in 1878. The main agricultural pursuit in the Nullawarre district is dairying. The Nullawarre Post Office still operates in the General Store building. This set of scales is of interest as it is a memento of the equipment used in country Post Offices one hundred years ago or more. Scales such as these may still be in use but electronically-operated scales are more likely to be used today.This is a set of metal weighing scales with two trays, one oval in shape and one round, on a balancing mechanism. This mechanism has two ornamental upright metal pieces. The scales are affixed to a wooden base in a rectangular shape with the front edge shaped into two curves. The wooden base has three slots for holding the weights. There are six brass weights with this item. The metal is a little tarnished and the wooden base is stained. nullawarre, history of warrnambool

This item is a bronze German MotherCross. The MotherCross was given to German mothers of pure Aryan heritage before and during World War Two. Adolf Hitler wanted to encourage population growth and keep the German mother at home. Mothers were awarded these crosses according to the number of children they had – gold crosses for eight or more children, silver for six or seven children and bronze for four or five children. The crosses were presented to mothers on 4th August, the birthday of Hitler’s mother and also on Mother’s Day. They could only be worn on special occasions around the neck on a blue cord with two white stripes. This German MotherCross is a bronze one and has on one side ‘Der Deutschen Mutter’ and on the other side ‘16 Dezember 1938’ and Adolf Hitler’s signature. The date indicates when the award was first instituted. There were at least 8 million recipients of the medal.The recipient and donor of this medal are not known but it is a very interesting and unusual memento of World War Two.This is a metal medal in the shape of a cross with a bronze ridged background in the shape of a rectangle. The cross is enamelled in blue and white and has a round bronze disc in the centre and lettering with a blue swastika on a white background. There is lettering on the back of the cross. A metal catch is attached to the top of the cross and remnants of a blue and white cloth cord are looped over the catch. One small fragment of the cord is detached. The medal is in a box which is not the original container. ‘Der Deutschen Mutter’ ‘16 Dezember 1938’ plus Adolf Hitler’s signature world war two, german mothercross

These badges were issued to a member of the Warrnambool Racing Club for the season1957-1958 and includes a male member’s badge and the lady’s badge issued to him. Horse race meetings have been held in Warrnambool since the early days of settlement (late 1840s) and the Warrnambool Racing Club was formed in 1854. Races were first held at the current site of the Warrnambool Racecourse in the late 1850s. Today the chief event of the Warrnambool racing calendar is the May Racing Carnival, held over three days and featuring the well-known Warrnambool Grand Annual Steeplechase.These badges are retained as examples of Warrnambool Racing Club members and ladies badges of the late 1950s..1 A metal badge, four sided, in an irregular shape. The outer rim has gold edging and there is an image in green, red and white of a horse and rider clearing a hurdle. The gold lettering has a white background. At the top of the badge is a metal ring with a brown cord with a metal fastener attached. .2 A gold-coloured badge in the shape of a triangle with gold lettering. This is attached to the brown cord of badge .1 above. .1 Warrnambool Racing Club. Not Transferable. Season 1957-58. 161. Stokes .2 W.R.C. Lady. Season 1957-58. 161. Stokes warrnambool racing club, history of warrnambool, badge

Items in the collection re MAX Jolliffee, refer Cat No 4322.3 for service details..1) Badge metal square shape blue with gold trim and text, one pin on rear. .2) Badge metal silver colour black background crown at top, centre has the letters "CMF". .3) Badge metal centre oval shape, colours gold, black, two blues, crown at top, centre figure boomerang at bottom, one pin on rear. .4) Badge, miniature of .3).1) "National Servicemens Association 51 - 72 Navy Army Airforce". .3) .4) Royal Australian Signals Association".badges, association, cmf

Letters both from Alfred G Ferris AIF to his Mother in Terrick Terrick. Refer cat No 4183.3P for his service details..1), Envelope, yellowish colour, rectangular shape, green and red PO stamps, stamped “Glasgow 5 Aug 1918”, hand addressed in black pen. .2) Brown coloured pressed plant .3) Envelope, rectangular shape, greenish colour, Field PO stamp, passed by censor stamp, hand addressed in purple. .4) letter, “YMCA” letterhead, blue colours, ruled lines, dated..4) dated, “FRANCE 10th Sept 1918, Dear Father”.letters, envelopes, pressed plants,

These items are from the Temple estate. George Temple (1832-1916) started Temple's store opposite Orbost Post Office. Packed stores to Bendoc area gold fields, also had a store in Cann River. This item is an example of a popular piece of jewelry worn by women in the early 20th century. These brooches were sold in a local store and could have been purchased for a local funeral.Black, bakelite brooch - three small sections form centre of brooch, one is a hexagonal cone-shape with hexagonal dome attached by link to smaller circular polygon attached by link to a smaller flat pentagon. Black mesh in the shape of wings form the backing featuring eight bakelite stars of varying sizes (two smaller stars missing from the assembly). A metal pin is attached to the rear in the form of a clasp.1900s jewellery, bakelite, mourning brooch, george temple, orbost store

Object. Woven palm - frond handle and 'spine'. Strips of palm-frond have then been split from the fronds, and woven in a 'basket' effect, with slightly wider - 1 cm, at the base of the fan shape, tapering to .5 cm at the top. Lower section at the centre. A second 5 cm straight shape section steps up to a top peak, 4 cm high. Some pattern is visible, in a darker colour.costume accessories, female, palm -frond diamond shaped fan

Silver War Badge (WW1) No. A.35027 belonging to "Herbert Charles Nott" No. 228. See also Cat No.S 7816.4 for H.C. Nott's service record. Part of the Cooper Collection.1. Circular metal badge with the words "For King and Empire" and "Services Rendered" around the rim. Voided cypher and Kings Crown (George V) in the centre. Reverse has a hinged vertical pin. Badge contained in dark grey coloured cardboard box. 2. Base of grey coloured box. Number of badge on white paper attached. Square in shape. 3. Lid of grey coloured box. Square in shape.1. Engraved on reverse side of badge 'A.35027'. 2. Printed in black ink on white paper on base: 'A35027'.herbert charles nott, cooper collection, badge, services rendered, ww1

Adzes are used for smoothing or carving wood in hand woodworking. It is similar to an axe but with the cutting edge perpendicular to the handle. It is used chiefly for shaping wood.A square ended adze that has a thin arched blade set at right angles to the wooden handle. The handle is not original.wood-working-tool adze carpentry

Sovereign cases were small portable boxes usually in cylindrical shape and made from various metals with snapshut covers to contain the coin. A white metal Sovereign coin holder with spring-loaded insert with engraved decoration on lidengraved decoration on lidpersonal effects, coins, early settlers, market gardeners, moorabbin, bentleigh, ormond

This darning egg is a plastic egg-shaped object, designed to be inserted into the toe or heel of the sock to hold it in the proper shape and provide a foundation for repairs.Two-tone moulded plastic darning egg.household equipment, darning eggs

Butter pats were common from about 1850 - 1920. They were used to shape the butter into pieces instead of by hand as the butter was soft.Two vintage wooden butter pats, one pale wood with a shaped handle, the other is a dark piece of wood without a handle. Both have ribs on one side for the butter to be shaped.butter, butter pats, kitchen equipment

The family would have used this cutlery on a daily basis as it is not the 'best' cutlery used for special occasions. Assorted very worn kitchen cutlery for every day use by the family. Most of it has a wide end at the handle with a small scalloped pattern: Forks, one large and one small, seven very rusted knives with bone handles, spoons, two larger serving, six dessert, ten teaspoons, two very small round sugar spoons, one patterned butter knife and two decorative servers.Various makers which are indecipherable. Two knife have 'G R Joseph Rodgers & Sons Cutlers to His Majesty (with a lined star shape and a cross underneath)'. Another knife has 'C J on a flag outline, with C Johnson & Co Sheffield England'. A smaller knife has a 'round symbol shape with a crown on the top - inside is Viner & Hall Sheffield Made Stainless Deluxe' One of the non matching servers has 'Grovesnor Delphic EPNS A1'cutlery, kitchenware, kitchen knives, table spoons, teaspoons, tableware, servers

Used to transport fertilizer but probably had other uses on the farm or at the mill.Two large hessian bags with string and straw inside; with inscription.On front of one bag with sickle image within a diamond shape." 22 / HIGH GRADE SUPER / COMMONWEALTH / FERTILISERS" On front of other bag with sickle picture."FLORIDA / SUPER /SICKLE / BRAND / CUMING. SMITH & Co"

Sixty eight page knitting pattern book featuring black and white text and colour images. The colour cover features five inset images of women wearing knitwear.front: [printed] Patons / 766 / gallery / ISSUE 1 / 1 / The Shape of / Things / Yolanda / Cholmondeley- / Smith / 2 / Kate / Summers / 3 / Julie / Rubenstein / 4 / Jo-ann / Cittadini / 5 / Kate / Summersfashion, design, knitwear, home made, wool, pattern book, patons

Carving of a small female head made by a patient of Mayday Hills Asylum. A grid has been drawn across the top with Romanian letters written within the cells.Mayday Hills Asylum was one of the three largest psychiatric hospitals in Victoria, and played an important role in the treatment of mental health illnesses from its establishment in 1867 to its closure in 1995. As part of prescribed treatment, many patients participated in craft activities were they were able to create an array of objects. A limb of a tree roughly carved into the shape of a woman's face, featuring a thick hair style, slanted eyes, delicate mouth, and long neck. Pen notations on top of sculpture.beechworth, burke museum, mayday hills asylum, sculpture, wood carving

Portable candleholders were commonly in use in Australian homes in the 1800s. Candles were very expensive in Australia and often were not available in stores. However, after 1850 the price of candles was reduced and they became readily available throughout Australia. Candleholders were popular as they protected furniture from hot wax. The dish around the candle stem collected the hot wax that could be reused later. When carrying the candleholder, the dish also protected the hand from the hot wax. This candle-holder is an example of an item commonly used before electricity was connected to the area.The candleholder is a hollowed round,saucer-shape with a ring finger-grip on the side. It has been enamelled but the original blue paint has worn off and it is very chipped and rusted.candlestick-holder lighting

A shield shape with a wooden base with 8 shield shaped plaques for recording of winner. Gold coloured design in the centre with a picture of a stopwatch and a running shoe inside a laurel wreath1992 Mullauna Secondary College (SC), Mitcham Campus 1993 Ringwood Secondary College 1994 Ringwood Secondary Collegetrophy, 1994, fun run, festival fun run, perpetual school trophy, ringwood festival fun run perpetual school trophy, mullauna, 1992, 1993, school trophy, run

This Rain Head came from what was originally the “School of Mines” in Bendigo which is now part of “TAFE”.Rain head, cast, top section is rectangular shape with cast lettering on, drainage tapers down, near the bottom is a depiction of a Rising Sun cast in. Measurements are an estimation at this stage.“Victory 1919”rain, head, container

The badge relates to the 7th Light Horse Regt AIF. Some sites have this badge labelled as an "Unofficial" collar/shoulder badge. Item in the collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details.Badge brass, top has a crown followed by a curved section with raised lettering, under is "7 LH" followed by curved shape with "Australia", rear has three lugs."Patria Te Salutamus"badges, 7th, light horse