This United Nations beret was worn by Major Damien Batty with Australian Forces whilst on tour in Somalia.United Nations wool blue beret with a metal United Nations badge pinned to the front. The band of the beret is made from a black coloured synthetic material. The lining of the beret is black cotton material with a plastic maker's stamp attached to the crown. Interior - Maker's Stamp: HILLS / PURE WOOL . MADE IN NEW ZEALAND / UNITED NATIONS PROPERTY / 1united nations, wool, peace keeping

Metal badges - relief of a Melbourne W3 class, number 667 in a MMTB green and cream with an orange roof, colour scheme. with an enamel gloss finish with a pin on the rear. Made by REV Gomm of Frederick St Birmingham. Destination not well defined.trams, tramways, badges, w3 class, souvenirs

Metal badges - relief of a Melbourne W7 class No. 1040 in an green and yellow colour, The Met scheme. with an enamel gloss finish with a pin on the rear. Showing destination of City, Route 88. Made by A I Parker - country of original cannot be read.trams, tramways, badges, w7 class, route 88, souvenirs

Used by the MMTB to indicate to conductors and inspectors, the tramcar number. Placed on the driver's bulkhead, facing into the tram with one at either end of the tram. The tram was built by Holden's Bodyworks in Adelaide, entered service in April 1926 and was disposed of in Oct. 1967.Demonstrates the method of advising crews the tramcar number internally.Set of 2 signs - galvanised rectangular sheet steel - provided with four screw holes, one in each corner painted with the numerals 3, 3, and 0. Both have small pins - one on the lower edge and one on the right side.signs, trams, tramcars, tram 330, w2 class

Slouch hat and Uniform jacket belonging to Edwin James JONES No 3511 AIF. Refer 1367.5 for his service history. The hat was manufactured in 1918 by Dalter Lucas & Sons Bury, UK. It appears to be of a similar style to those issued to Gurkha troops due to the thickness of the felt, the three rows of stitching around the brim and the use of a press stud to pin up the left hand side of the brim..1) Coat, Battle Dress, Kahki, includes 2 x “Australia” shoulder badges, 2 x “Rising Sun” epaulette badges, 2 x “yellow over purple” colour patches, 3 x “service chevrons”, 1 x “Empire Wounded stripe”, 1 x “Lewis Gun” cloth badge, all metal buttons intact as well as waist belt. .2) Hat, Slouch, kahki fur felt, cotton pugaree, leather head band, Rising sun badge, no chin strap..2) Pressed into the hat band appears to be; “Dalter Lucas & sons (1910) Ltd, BURY 1918”uniforms, military clothing, costume accessories - male

The Improved Martin-Adelphi Anchor. The introduction of cast steel in 1894 led to the improved Martin-Adelphi pattern, in which the crown and arms are cast in one, and, with the stock, are made of cast steel, the shank remaining of forged iron. A projection in the crown works in a recess (right image), and is secured in its place by a forged steel pin, fitted with a nut and washer, which passes through the crown and the heel of the shank.Stock-anchor - improved Martins patent, Adelphi pattern improved Martins patent anchor, Adelphi pattern

The photograph shows a cable tram set being towed out of a car depot or car house by a tractor, North Fitzroy Nicholson St depot. The grip is in the raised position, with the gripman's hands on the brake levers. The conductor is waiting to pull the pin that secures the tow bar. The tram has the destination of Spencer St. Photo late 1930s or 1940. Note the Bundy clock on the depot wall.Yields information about towing a cable tram out of a car house probably shortly before closure of the cable tram system in 1940.Black and White photograph - printed on plain paper.On the rear has the Copyright stamp of The Age and pencil number "KM-M-007", Ken Magor stamp, "tram being towed out of depot" and number 4838.cable trams, tractor, towing cable tram, car house, north fitzroy depot

These bows would have been attached to either the front of a blouse or back of a long dress as an accessory to change an outfit or give it style. It was probably worn by Mrs Whiteman and passed on to her daughter Marjorie Burton.This item is an example of a handcrafted item and reflects the handcraft skills of women in the first half of the twentieth century.Two hand-made bows - accessories for a dress or blouse. 2483.14 is a yellow/gold colour made of satin or rayon. It is a bow with a long hanging tail. 2483.15 consists of 4 strips of green, red and black material gathered together with a safety pin.dress-accessories fashion burton-marjorie clothing

Badge, round shape in red, white & blue colours, inscriptions are around outside in a circle, centre in a gold colour are two figures, one standing one kneeling, at the bottom in large text "1919", On the rear is a pin for clothing attachment and the makers details."ANZAC Remembrance Day - Gallipoli Landing 25th April 1915"brsl, smirsl, badge, anzac

These shoes which would have been a child's first shoes are soft leather and possibly date from around the late 19th or early 20th century. We have no knowledge unfortunately as to whom they may have belonged. Baby's first shoes are often kept as a keepsake .These little shoes have significance from a social and historic viewpoint. A pair of leather maroon shoes with front straps which fasten in the front with a button. The inside of the shoes is cream in colour. The upper leather is quite soft . The sole is a harder substance possibly leather. Both shoes look to have pin holes in the soles.There is the remains of a small label inside one shoe. warrnambool, baby shoes, antique baby's shoes

Refers to the service of 3483 Pte J.J. COLLINS. Refer to Cat 647P.This is a set of two WW1 medals mounted on a bar. There is a pin at the back to mount the bar on clothing. The medals are; British War Medal 1914-15, Silver in colour. Victory medal 1914-1919, Gold in colour. The actual medals are 18 mm diameter.Around the rims is his engraved name " J.J. Collins".medals, ww1

This is a 6 valve portable transceiver, made in Australia from a British design. It was only used for C.W. (morse code). Its frequency was in the range of 2.5-3.5MHz. Output power 0.5-5 watts. Use was for commando and infantry patrols up to battalion level. It had an external battery pack for low and high voltage supply. 1 man operation in Tropics. An image of this type of wireless set in operation can be found in the AWM Collection: P02952.012 081815 Aluminium box, cover missing. The top has various dials, jacks and one gauge. There is a small length of cable coming from the control panel to a 4 pin plug. On the outside of case is the phrase D (arrow up)D 208 MKIIPlaque on control panel "WIRELESS SET - ZAA 2088 SERIAL NUMBER 168 DATE = 1944"wireless, wwii

The items were part of a collection relating to Frederick Campbell Moller No 2233 AIF. Refer Cat No’s 1661.3, 1680.3, 1682.5, 1663P..1).2) Two matching buttons, brass, British coat of arms with crown. .3) .4) .5) Three buttons with Centre cross with stars, crown at top. .6) Sabre pin shaped like a sword/rapier, brass, with handle and a hilt..1) On rear, “Firmin & Sons London - Smith & Wright limited Birmingham” .3) .4) “Bryon Bros London” .5) “H W MARTIN LONDON”unfirom - accessories, costume accessories - clothes, accessories, metalcraft - brassware

The “S” on the patch denotes the airmen was a Signaller..1) Ribbon, "Pacific Star" mounted on brass plate with pin. .2) Badge, cloth, RAAF, dark blue background with light blue floral arrangement with letter "S: in white. Out to the right is a single white wing on dark blue background.ribbons, accessory, pacific, raaf

Charles worked in the Merchant service. After enforced retirement due to injury he was active in Civil Defence. Donated by the estate of Mr Charles Page. Commemorative cast alloy/silver-coloured oval medal with attached ribbon and pin. One side of medal depicts profile of QEII, while the other side depicts three shields with acorns. The medal is housed in a small blue velvet lined case.On box: "Civil Defence Long Service Medal"charles page, medal, civil defence

.1) These capes were worn by student nurses when going on and off duty, when called to see the Matron or senior nurse (but never worn on duty). They were made of unlined woollen fabric and were wrist length and worn by Alfred Hospital student nurses until 1992.This nurses cape was made before 1970 as Ball & Welch Ltd was bought out in 1970. .2) RANF was between 1971-1988. In October 1975 the Royal Victorian College of Nurses amalgamated with the RANF Employees' Section and became the new Royal Australian Nursing Federation. .1) Machine stitched light blue pure wool cape with stitched down shoulder epaulettes. Around the neckline is stitched cotton bias binding which is hemmed by hand. Hook and eye fastening. .2) Badge pinned to left hand front Badge - Student Nurse Unit R.A.N.F.nursing, alfred hospital, student nurse cape, woollen cape, royal australian nursing federation, ranf, badge, ball and welch, costume, textiles

The Kooyong Military Hospital in Kooyong Road, Caulfield was established for the care and rehabilitation of soldiers injured in World War 1. Many events like carnivals were held by the Red Cross to raise funds for the war effort and entertain the patients.This badge is a reminder of the Community support for injured soldiers when they returned from WW1 conflict and were hospitalized at Kooyong Military Hospital Caulfield 1914 - 1948 This badge was displayed at the GECC 'Wounded Soldier WW1 1914-1918 Exhibition" 2016 at Glen Eira Town Hall Caulfield A small tin button, with pin attachment at the back. The button was produced and sold as a fund-raiser for the Kooyong Military Hospital during the World War1, 1914-18, at that organisation's Carnival held on March 18th 1916. The front of the button is white with a blue perimeter. A copy of the City of Caulfield's Coat-of- Arms and the words, City of Caulfield, is written on the front of the button, as is the date 18th March 1916. Both the above are written in red. Kooyong Military Hospital is written in blue. ww1, 1914-18, kooyong military hospital, war casualties, caulfield, moorabbin, bentleigh, carnivals, fundraising, patriotism, anzac, australian commonwealth military forces

The Patriotic Carnival was held at the Melbourne Cricket Ground (MCG) from the 20th to the 27th of October to raise funds for the support of returned servicemen and their families. Early Settle families in Moorabbin Shire were generous supporters of local charities for returned service men and womenVoided round gilt and enamel badge with pin on back. The front has the Melbourne Cricket Club logo, ‘MCC’ in red and white at the centre; around on blue background, ‘PATRIOTIC CARNIVAL 1917’. The reverse has the makers name, ‘STOKES & SONS MELB’.Patriotic Carnival 1917 MCCmelbourne cricket ground, fundraising, returned service men, patriotic carnival

The key is one of a collection of seven 1860s keys once belonged to the Glenample Homestead near Princetown. They are all keyed with different bits and would have opened the external panelled doors of the Georgian building. The keys would now be around 150 years old. The keys are now part of the John Chance Collection. Locksmiths became a recognised trade by the middle of the 19th century, doing work that blacksmiths and gunsmiths would have done. They were craftsmen and trained apprentices for their trade. The local community and businesses relied on them for making a wide variety of precision objects such as locks and keys, knives, ornamental and decorative latticework, fine instruments, accurate tools and hardware items. Glenample Homestead became famous after the disastrous wreck of the sailing ship Loch Ard on June 1, 1878. The owners, Hugh Hamilton Gibson and Peter McArthur, were involved in the rescue and recovery of Eva Carmichael and Tom Pearce, the only two survivors, as well as overseeing the salvage of items from the shipwreck and the burial of those who lost their lives. Eva first met Jane Shields at Glenample and they became long-time friends. The keys are significant as an example of mid-19th century locksmith hardware, and for their connection with Glenample Homestead, and for their connection to the history of the Loch Ard shipwreck’s only two survivors. The set of keys also hold significance as they were discovered by John Chance, who was also a diver from the wreck of the Loch Ard in the 1960s-70s. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. Glenample Homestead is of historical, social and architectural significance to the State of Victoria and is listed on the Victorian Heritage Register (VHR H0392). It is a historical example of early settlement and development of a run in the coastal land of South West Victoria, and it is constructed from locally quarried sandstone but doesn’t take away from its Georgian design. Glenample Homestead is of State significance through its unique connection with the wreck of the ship Loch Ard and the connection to its owners, Hugh and Lavinia Gibson and Peter McArthur, played a historically and socially significant role in the rescue and care of the survivors, the salvage of goods and the burial of those who lost their lives. The shipwreck of the Loch Ard itself is of significance for Victoria and is registered on the Victorian Heritage Register (S417). Key; steel domestic door key. Flat open bow with 'figure 8' space. Round narrow shank flares out slightly above the collar on the bit. The rectangular bit has has external notches and grooves. There is a rounded pin on the end.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, glenample homestead, victorian heritage register vhr h0392, georgian homestead, loch ard, princetown, jane shields, eva carmichael, tom pearce, blue china tea set, antique door key, glenample photographs, john chance

These forceps belonged to the late Colin Noel de Garis. Also donated was a foetal scalpel electrode applicator- see donation form. There is a note that former honorary curator Peter Renou collected the donation. Peter Renou does not recall being involved in the donation.( Source: Grainne Murphy 15 November 2010.) This design of obstetrical forceps, with a screw in the handle, was introduced by George Thomson Elliot (1827-1871), a New York obstetrician. (Source: National Museum of American History, 'Obstetrical forceps') The 'sliding pivot' on the forceps was designed to prevent the compression of the baby's head. (Source: Elliot, GT, 'Description of a new midwifery forceps : having a sliding pivot to prevent compression of the foetal head, with cases', c.1860)"The Elliot forceps and its modifications (Elliot, Tucker-McLane, Tucker-Luikart) have shorter blades and an accentuated cephalic curve that is more suitable for a rounded fetal head that has not undergone extensive molding. In addition, Elliot instruments, because of their overlapping shanks, do not distend the perineum in the same way as the separated shanks of the Simpson-type forceps." (Source: Sakornbut, EL, 'Chapter 18 - Intrapartum Procedures', in Ratcliffe SD et al (eds.), 'Family Medicine Obstetrics', 3rd ed., 2008) Obstetric forceps, Elliot's. Consists of long shanks, made of forged chrome plated metal with metal handle, four finger grips, and distinctive screw and pin at the end of the handles. This screw functioned as a means of regulating the lateral pressure of the handles when in use. obstetric delivery

Clothing. Cream coloured ladies leather gloves. Three pin tucks on back of each glove. 6cm split at inside wrist. Gathered inside wrist on elastic strip. Unused. Still stitched together on side seam. Old box 573.Stamped in gloves 02691 (twicein LH glove). RH glove ''Made in England''. Leather gloves 7''. Two stickers , 5/- 11/9 6-3 412''costume accessories, female, cream coloured ladies gloves

Chain shackles are used in lifting and static systems as removable links to connect wire rope. Screw pin schackles are used mainly for non-permanent applications. SWL - safe working limit Cwt - 100 lbs. American. 112 lbs. BritishSWL 60 Cwttie down, towing, suspension, lifting

Ratchet Assembly on a flat surface cast bearing; one side broken off. 10cm dia ratchet wheel held in position by a locating pin. Captive handle 1.2cm round steel 35cm long. A 15cm piece of chain is attached to the shaft.

Demonstrates aspects of Ballarat's Tramway operations by the SEC in noting the days a person was on Annual Leave. Has a strong association with the SEC and tram operations in Ballarat.Rubber stamp and wood stamp base for stamping rosters and/or time sheets with the letters "A.L." to indicate when a person was on Annual Leave. Comprises a varnished shaped wooden section, cut from a preformed strip with a drawing pin to indicate the top of the stamp. trams, tramways, sec, rosters, times, crews

Demonstrates aspects of Ballarat's Tramway operations by the SEC in noting the days a person was on Sick Leave. Has a strong association with the SEC and tram operations in Ballarat.Rubber stamp and wood stamp base for stamping rosters and/or time sheets with the letters "S.L." to indicate when a person was on Sick Leave. Comprises a varnished shaped wooden section, cut from a preformed strip with a drawing pin to indicate the top of the stamp. trams, tramways, sec, rosters, times, crews