21cm x 12.5cm building at 39 Sydney Street. The double story building has an ornate light-coloured facade. Arched windows on the ground floor and rectangle window with trim on the top floor. Signage on the building states "Colonial Bank of Australasia Limited"Written on the back: 396 12-86-17colonial bank, banks, banks and banking

10.5cm x 7cm black and white photograph of Hardidge's Commercial Garage on Sydney Street. The Garage is in a light coloured building sandwiched between a Castrol petrol station and a milk bar. A vehicle is parked out the front with a man sitting in the tray and one standing partially obstructed and petrol bowsers can be seen. An enlarged photo is available. Written on back: 690garage, mechanics, vehicle repair

From the home of Mrs. Nell Sebire. Second wife of Thomas.Double globular bulged glass soda siphon covered in metal netting and inscribed metal (silver plated) tap dispenser on top. "Veritable Seltzogene D. Fevre Paris Marque Depster S" inscribed around metal piece.bottles, containers, carbonated water

Murray Comrie Collection. Monochrome photograph depicting three wagons loaded with logs, being driven by three unidentified men. The photograph appears to be taken in Gladstone Street, Tarnagulla. The wagons are carting five-foot firewood billets to the Tarnagulla Gold Estates hydraulic dredge operation.. This photograph is a fair copy of an older original, probably made in the late 1960s. tarnagulla, timber, haulage, transport, horses, wagons, industry, people

Chip carving was a popular hobby amongst ladies at that time. Square bread board and knifeChip carvedbreadboards, kitchenware

Kerosene lamps were used as a main source of lighting throughout Australia prior to the supply of domestic electrical services. This was obviously later in many rural areas. This lamp was used in the home of Mrs. Laura Flower nee Sommer wife of Mr. Stanley Flower of Wodonga.This lamp is representative of the lamps used throughout Australia prior to the introduction of domestic electricity supplies. It was used in the home of a Wodonga resident.This item has a cast iron base in a pyramidal shape with the four sides having an identical leaf and flower design. A piece of brass attaches the base to a clear glass bowl. The bowl contains a white wick. The brass wick holder has an external knob for regulating the light intensity. There is more brass between the bowl and the mantle which is made of plain glass.Inside the base of the lamp: an Rd No which is uncleardomestic appliances, kerosene lamp

Lamson was established in Australia in 1898 with the idea for a store security money handling system being patented in the latter part of the 19th century.The practise of taking money from the counter and customer to the cashier was time consuming and cumbersome.Some bright ideas were employed including tying the money and dockets in a hankerchief and throwing it to the cashier. The first attempt to improve this was the ball system where a ball containing the cash was rolled to the cashier on an elevated track. The rapid wire system superseded this in the early 1900's and for the next 50 years it became a popular part of money handling in stores around Australia. This particular Lamson's cash carrier was installed in Youngers department store which was situated in Liebig Street. The success of Youngers store was partly responsible for the shift to Liebig St as the main commercial district. The Warrnambool Standard reported in 1901 that Younger and Co would operate on a wholly cash basis replacing incidental trades of goods such as potatoes and other farm produce.This item has strong social and historical significance. Apart from having strong links to one of Warrnambool's largest and longest running businesses, the object itself is of considerable interest with thousands of the original ball systems and Rapid Wire cash carriers being in use around the world. Cylindrical brass top with central circular part with section either side which have two small pulleys. A wooden cylindrical section slots in below with a wire clip attached at the bottom.Lamson is cast into the brass on either side of therim of the top circular section. . AUS is on the side of this same section. warrnambool,, youngers, youngers warrnambool, lamson, lamson rapid wire cash carrier, wire cash carrier

No specific information is available on this item but it was a common object in the past when candles were an important source of light in a house. Candle snuffers are also used in churches but these are usually larger in size. This item has no provenance and is in a poor condition but will be useful for display.This is a metal candle snuffer in a very rusted condition. It may have originally been silver. It has two scissor-like handles which open a lid which has a sharp edge which cuts off the top of the wick and extinguishes the flame. The pointed end of the item was also used to trim the candle and the snmall container behind the lid stored the wick pieces cut off. There is an embossed flower decoration on the handle and more decoration on the box area. There are three rests to allow the snuffer to sit on a surface.candle snuffer, warrnambool

These labels come from the business of Giffen Russell and Company, a wine and spirits store in Fairy Street, Warrnambool. Giffen Russell commenced business in 1878 and was joined by Joseph Powell as a partner in 1881. The business of Giffen Russell and Co. was operating in the early 1900s and still went by that name in the 1940s with H.L.Lynch the proprietor at that time. These labels are of considerable interest as they show the extent of the goods sold by Giffen Russell, a prominent wine and spirits dealer in Warrnambool in the late 19th and early 20th centuries. .1 A sheet of white paper with a gilt edge and black printing .2 A sheet of white paper with a blue border and blue printing .3 A sheet of paper with blue printing and decoration on a green background .4 A sheet of white paper with a blue border and blue printing .5 A sheet of white paper with a decorative blue border and blue printing .6 A sheet of white paper pasted on to a piece of card. The printing is gold and blue surrounded by decorative patterns, including bunches of grapes .1Australian Gin bottled by Giffen Russell & Co. Warrnambool .2 Finest Virgin Olive Oil Product of Italy .3 Pure Australian Wine Frontignac bottled by Giffen Russell & Co. Warrnambool .4 Raw Linseed Oil bottled by Giffen Russell & Co, .5 Finest Brown Malt bottled by Giffen Russell & Co. Warrnambool .6 Seppelts Invalid Port bottled by Giffen Russell, Merchants, Warrnambool giffen russell, wine merchant, history of warrnambool

These cello strings belonged to Edith Jacobs (nee Larwill) who was prominent in music circles in Queensland before her marriage to Henry Jacobs, a Warrnanbool Estate Agent and Auctioneer during the 1940s and 50s. Edith Jacobs featured in many concerts and musical entertainments in Warrnambool during the middle years of the 20th century. Her son, Frank Jacobs was a prominent businessman in Warrnambool in the 70s, 80s and 90s and the wallet was either made by him or for him. These items are of some significance as they belonged to Edith Jacobs, a musician who was prominent in the Warrnambool musical scene in Warrnambool in the 1940s and 50s.This is a light brown leather wallet, hand made with two fringed areas, one on the top covering. There is some machine stitching and some hand stitching (repairs)The wallet is lined with cream-coloured silk and the back of the wallet has an etching of an emu. The opening has two press studs for closing the cover. There are also three paper packets containing cello strings. Two of the strings are loose in the packets. Label stitched on – ‘Frank H. Jacobs’ Etching of emu Strings – ‘Calizi Tru-tested Strings, Cello, G or 3rd, Wound on selected gut, Made in England, J. E D. & S Ltd.’ ‘Conservatoire, Cello, A gut, Reliable and Durable, No. 1620, J.E.D.& S. Ltd’ edith jacobs (larwill), cello, cello strings, warrnambool

This ledger contains details of debts owed by people in the Warrnambool district. It dates from 1906 to 1916. The compiler of the ledger is unknown. Many of the debtors are Chinese, mostly working as market gardeners in the north Warrnambool area and the debts usually concerned rents and the supply of agricultural items such as chaff. These Chinese, many of whom came from the Victorian goldfields, operated market gardens and businesses in the town of Warrnambool from the 1870s to the 1930s or 40s.This ledger is of interest because of the names of people listed as debtors and in particular the names of Chinese working in the district. The ledger is thus a valuable research tool. This is a ledger with a thick card cover in a mottled pattern in red, black, blue and yellow colours The spine, which has some damage, is covered in a maroon coloured leather. The pages are ruled with red lines and the entries are handwritten in ink. There are some loose pages.Debtor's Ledger C.L.warrnambool chinese market gardeners, warrnambool, chinese

The business connected to this ledger, dated from 1904 to 1907, is unknown. There are some local Warrnambool and district names but most refer to other places in Victoria and interstate. The entries mostly deal with the sale of produce - onions, potatoes, barley, oats etc. and the names of ships are usually appended . One can guess that the ledger comes from a Steamship Company, a produce buyer or a cartage contractor.This ledger is of minor interest and is retained for research purposes.This is a ledger of 755 pages. The cover is charcoal-coloured hard board with brown leather on the spine and the edges of the cover. The spine has a red label with gold-coloured lettering. The pages have ruled red lines and handwriting in black ink. The ledger is much stained and tattered at the edges.Day Bookwestern district produce, warrnambool, onions, potatoes, barley, oats

This is a teacher's desk which came from Woodford State School. The school began in 1854 in a private dwelling with a new building constructed in 1874. The school still operates today.This is a very fine example of an early 20th century school teacher's desk. As it comes from one of the earliest schools in the district, it is of considerable significance.This is a wooden desk, now varnished, with a lift up, slanted lid with brass hinges and a brass key hole. On the top right hand side is a brass insert with a porcelain ink well. The desk has four turned legs with end struts. The desk lid may be made of pine but the rest of the desk seems to be made of a different wood. There are signs of old borer on the left hand front and the curved part on that side is missing.woodford state school, teachers desk, wooden teachers desk

Hispano Moresque pottery charger made in Spain in the first half of the twentieth century. Such lustre ware was the inspiration for the work of English potter William de Morgan whose work is also represented at Hymettus.Large platter or charger

The quatrefoil design similar to other chapel decorative arts, suggests these vases may belong originally in one of the MIssion Chapels. Possibly either the demolished 1937 Building at Port Melbourne or the original Chapel from the early 20th C at the previous Mission Building in Port Melbourne. Possibly donated in the name of Olive Cramer along with an organ lamp and memorial plaque mounted in the Chapel of St Peter.Many people see the quatrefoil as representing good luck. Christians, on the other hand, see the quatrefoil as representing the four Gospel writers: Matthew, Mark, Luke, and John. Some Christians also regard it as being symbolic of the cross.Pair of small fluted heavy brass vases with quatrefoil opening and small footprint. Highly polished outer surface and unpolished inner; each of the undersides seem to be of lead or coarse alloy lined finish.quatrefoil, clover, shamrock

These cash carriers were used in the Warrnambool business of Swintons Pty Ltd. They were manufactured by Lamson of U.S.A. William Lamson of Massachusetts, U.S.A. first patented cash carriers in 1882 and originally the cash balls were carried from counter to cashier via a wire and pulley system. These Swinton cash carriers were carried via pneumatic tubes. William and Ann Swinton migrated to Australia in 1854 and for a decade William Swinton worked as a builder and carpenter in the Warrnambool area, erecting many buildings, including the Wangoom Presbyterian Church. In 1865 he opened a store in Timor Street, Warrnambool, selling groceries, hardware, glassware and china. By 1888 the business was known as William Swinton and Sons. Branch stores were opened in Cudgee, Nullawarre, Wangoom, West Warrnambool and South Warrnambool. After William Swinton’s death his son Robert became the first managing director of Swintons Pty Ltd. In 1934 the business split, with George Swinton and Sons selling furnishings, clothing and glassware and Swintons Pty Ltd selling seeds, produce and hardware. Today the Swinton family still operates a furniture and bedding store in Timor Street. These cash carriers are of great interest firstly as a memento of business practices in the past and secondly because they were used in the Warrnambool business of Swintons Pty Ltd. The current Swinton business in Timor Street Warrnambool is the oldest family business in Warrnambool and, with the name Swinton associated with Timor Street businesses for 152 years, it is amongst the oldest family businesses in Australia. These are two cash carriers. They are brass cylinders made with a large opening at the top with an inner lining which can close over the opening. The cylinder has two wooden holders at each end attached to the brass with three metal screws at each end. The brass is somewhat rusted and the wooden ends are worn. These cash carriers were sent from the cash counter in a shop or business to the cashier via pneumatic tubes. ‘Lamson Patent’ ‘RCM/Lamson’ swinton family, warrnambool, history of warrnambool

This wooden cash ball came from the retail business of Cramond and Dickson. It was part of the mechanism for sending money and change to and from the customer to a shop assistant dealing with the finances. The ball ran along sloping rails in the shop. John Cramond and James Dickson, both from Scotland, established a general store in Warrnambool in 1855 in Timor Street. The business was later transferred to the corner of Liebig and Timor Streets and became a well-known landmark in Warrnambool, closing in 1973. This item is significant as it came from one of the most important businesses in Warrnambool’s retail history – that of Cramond and Dickson. It also is an important example of retail store practice in the late 19th century and early 20th century. This is a cylindrical wooden ball which separates into two parts to allow the insertion of money in the middle. There is a round metal disc which is housed in the centre of the wooden ball.It has a circle marked on the outer surface of both semi circles of the ball. It is brown in colour. On both halves of the ball on the outside – ‘D 4’cramond and dickson, warrnambool, money ball

The S.S. Peterton a steamship was built in Glasgow and launched 1917.Small black and white photograph of informal group of seafarers with one member of crew dressed up as a king with crown (possibly Neptune). Photographed on deck of ship while in a PortHandwritten in black ink on page or mount beneath image " Officers and crew of the S.S. Peterton"seafarers, officers, costumes, crew, life on board, duncan album

The wooden pattern was possibly made for casting a part for Craftman Marine, makers of engines for boats and other machines. It is part of a set that is stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; rectangular wooden block with a corner cut diagonally. A five-sided shape has been carved into the centre, with one side curved inwards and slightly shallower than the other sides. The cut-out area is painted black. Three holes are drilled in the cut-out side to align the pattern with another piece of work. A wooden slat is fixed across the diagonal side. The back of the pattern has a handwritten inscription, possibly by two writers. The pattern is part of a set of foundry patterns from Briggs Brass Foundry and is connected to Craftman Marine.In black handwriting: "1 # H AL" Handwritten in a different hand: "CRAFTMAN MARINE" Written the the first hand: BRIGGS" (or "BRICK")flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912, craftman marine, craftsman marine

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. It may fit together with one of the other patterns with a similar outline. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century.Pattern; thick square mostly unopainted wooden block with a solid half-cylinder added to the top, which has rounded shoulders. A disc is added to the front, aligned with the curve at the top. The top curve has orange paint and the dial is pink. Three holes are drilled in the back, in a triangular configuration. It is similar in shape to a mantle clock or an early-style radio. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

The wooden pattern is part of a set that is stored in a strong wooden crate and may be part of another similar pattern. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; unpainted, square wooden block with a semi-circle of dowel added to the centre of the side with rounded corners. Three short dowel pegs are inserted on one flat side; one below the semi-circle and one near the lower corners in an overall triangle configuration. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

This is a cash book from the business of William Swinton and Sons. The entries list stock, financial assets, deeds and insurance policies from 1902 to 1911. William and Ann Swinton migrated to Australia in 1854 and for a decade William Swinton worked as a builder and carpenter in the Warrnambool area, erecting many buildings, including the Wangoom Presbyterian Church. In 1865 he opened a store in Timor Street, Warrnambool, selling groceries, china, glassware and hardware. By 1888 the business was known as William Swinton and Sons. Branch stores were opened in Cudgee, Nullawarre, Wangoom, South Warrnambool and West Warrnambool. After William died his son Robert became the first managing director in 1913 of Swintons Pty Ltd. In 1934 the business split, with George Swinton and Sons selling furnishings, clothing and glassware and Swintons Pty Ltd selling seeds, hardware and produce. Today the Swinton family still operates a furniture and bedding shop in Timor Street. This cash book is of considerable interest as a business document of William Swinton and Sons. The entries for the early 20th century give details of business stock and finances and will be very useful to researchers. The current Swinton business in Timor Street Warrnambool is the oldest family business in Warrnambool and, with the Swinton name associated with businesses in Timor Street for 152 years, it is one of the oldest family businesses in Australia.This is a hard cover book of 96 pages with a dark green cover and red leather trimmings on the spine and cover corners. There is gold lettering on the spine. The insides of the cover have a green and brown mottled patterning and the page edges have a multi-coloured mottled patterning. The pages have printed ruled red lines. The entries are handwritten in black ink. There are five loose sheets. ‘Cash Book’ swinton family warrnambool, history of warrnambool

This brooch is small and tasteful and the ‘forget-me -not’ wording in the centre probably indicates that it was given by someone to a loved one as a token of love or friendship. It was most likely pinned to the collar of a blouse at the neckline or to a jacket lapel. This brooch has no known local provenance but is retained as a fine example of an early 20th century piece of jewellery and for display purposesThis is a rectangular-shaped gold brooch with a blue plate with gold lettering in the inner section and ornamental gold scrolls around the outer section. The back of the brooch has a metal clasp.For Get-Me Notwomen’s, vintage jewellery, warrnambool

This letter book contains letters written by representatives of the Warrnambool Lance Patent Pan Company to agents in Western Australia during the period 1896 to 1913. This company was formed to market the Lance Patent Cess Pan produced by George Lance in Warrnambool. The Western Australian venture did not prove profitable for the company. George Lance was a Warrnambool plumber and gasfitter who produced the Eureka Pump and the Lance Patent Cess Pan. The latter sold widely in Victoria with the Warrnambool Council owning 1700 of these pans in 1896. George Lance was also prominent in Warrnambool as a musician, artist (eleven of his works are in the Warrnambool Art Gallery)and local history writer. He was also involved in the development of the Warrnambool Mechanics Institute and the establishment of the Warrnambool School of Art and Design and the Warrnambool Art Gallery. This letter book is of considerable interest as it gives details on one aspect of the George Lance invention of the Patent Cess Pan (its marketing) and George Lance played an important role in Warrnambool's late 19th century history.This is a letter book of 506 pages. It has a hardboard cover with a mottled red pattern and red binding on the spine. The pages contain an alphabetical index and copies of letters handwritten in black ink. There are many blank pages. The letter book cover is torn at the edges.george lance patent cess pan, george lance warrnambool, warrnambool plumbers, cess pan patents

This ledger’s first owner was Rolf Crawley, an architect and the official engineer for the Shire of Warrnambool from 1935 to 1968. His grandfather, father and uncle also worked for the Shire of Warrnambool, with the family members recording a total of 132 years of service to the Shire. Stan Baulch later acquired the ledger, tore out the pages that had been used and recorded some aspects of his life from 1916 to 1923. Stanley Baulch (1897-1980) was the grandson of pioneer Kirkstall settlers, Francis and Ann Baulch and the son of Samuel and Eliza Baulch. In 1893 Samuel Baulch acquired the historic property of Dunmore, between Macarthur and Hawkesdale and in 1910 he purchased the property of Cowabee in the Riverina district in N.S.W. Stan Baulch managed Cowabee for some years before inheriting part of Dunmore which he named Rose Park. Cowabee was sold in 1922. Although only a few pages in length, this diary contains much interesting information on the early years of Stan Baulch at the homesteads of Cowabee and Dunmore. It will be useful for research purposes.This is a hard cover ledger with a dark grey cover and dark red binding. It contains pages printed with the name and address of the Shire of Warrnambool Engineer, Rolf Crawley. These pages contain two sections to a page ruled with blue lines to be used for short letters or invoices (originally 500 sections). The ledger also has blank pink pages used for duplicate copies. The first 42 sections have been torn out. Twenty of the pages have handwritten material in blue ink and these are biographical notes about the years 1916 to 1923 written in the ledger at a later date by Stan Baulch.Cowabee-Dunmore S.S.B. diaries 1916-23stanley baulch, cowabee & dunmore properties, rolf crawley, history of warrnambool

This is a simple household labour-saving device. The box was fitted to the end of the table and knife polish was sprinkled on the cloth inside. The knife was then placed in the centre of the box and clamped in tightly. The knife was then pulled backwards and forwards several times (three seconds was the suggested time) and the object was then deemed to be polished. All households had cutlery of some sort and many had good silver pieces that were meant to be kept in a sparkling polished condition. This cleaner would have assisted those in a household assigned to the care of the cutlery. These would have included the women of the household, the children or domestic employees. This item is retained as an interesting example of a household labour-saving device from 100 years ago. This is a circular wooden box with an extra piece at one end of the base and a sliding top lid with a wooden knob. The lid lifts up and the inside of the box and the lid is covered with rough cloth. Some of this cloth has rotted away. The top of the lid has a printed label pasted on. This is torn and soiled. ‘Patent The Magic Knife and Fork Cleaner’ ‘I am handy and useful where’r I am used, To clean knives and forks brightly I never refuse, In mansion or cottage to both I do go, So buy me, and try me, my worth you will know.’ household devices, history of warrnambool

This item is an early type of cooker and would have been used to cook meat and puddings in the first two or three decades of the 20th century. It has no known local provenance but may have been a display item from the old Warrnambool Museum which was established in 1883 and was dismantled in the 1960s. This item, although incomplete, is of interest as a cooking bowl from the past and is retained for display purposes. This is a circular-shaped white china bowl. The base has a hollow tube protruding up through the centre of the bowl. There is printing on the outside of the bowl and on the top inside section. The lid of the bowl is missing. The ‘Quick Cooker’ Patent No 12161/11 Gold Medal London 1911 Excellent for stews of all kind Meat can be kept hot for hours without over-cooking or getting dry Grimwade’s Patent Nos 12835/09, 15043/09 Do not fill above this line – The pudding then has room to expand Water in saucepan should also be about this level ----- vintage culinary items, history of warrnambool, quick cooker

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; rectangular wooden block made from laminated sections of wood painted black. A half-cylinder shape was carved into the long side, and a dowel shape was placed at the lower side. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; pair of U-shaped carved blocks, unpainted. The blocks have opposing metal pins and holes to hold them together. One block has a disc shape carved into the base. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912