At the outbreak of war in 1939 Perth was serving in the West Indies. She served with distinction at Cape Matapan against Italy. Perth suffered damage from an air attack while berthed in Malta. Perth evacuated troops from Greece to Crete when Crete was invaded by the Germans When Japan entered the war in December 1941 Perth was sent to Java in the Dutch East Indies - now Indonesia. Perth's total complement was 681, of these 353 including Captain Hector Waller D.S.O were lost in action, 4 died ashore and 324 fell into Japanese hands. Of these 106 ratings died while prisoners of war, 53 dying while working on the Burma - Thailand railway.Framed Information sheet with description of specifications - crew numbers and service record of H.M.A.S Perth.H.M.A.S Perth (ex H.M.S Amphion). A Light Cruiser Leander Class 1941 of 7600 tons. Under full power speed trials reached 31.7 knots. Perth was commissioned as H.M.S Amphion on 15th June 1936 and was renamed H.M.A.S Perth by H.R.H Duchess of Kent on 10th July 1939.

25 cm x 17.5 cm black & white Tin Type portrait. Woman half length in black mourning dress. Parted drawn back hair style with pale pleated cloth head band worn similar to a tiara. Pendulum earrings. Silver Albertina chain and bar suspended from dress front to side pocket. Knotted silk scarf around neck and down to waist. Photographer and subject unknown.unknownphotograph, person, female

Bugler Donald G Akins Boer War Memorabilia, Bugle, Meirsham Pipe Bowl, Native Zulu Bracelet, African Necklace, Beaded Necklace, Kaffir Twist Knot of Tobacco, 6 South African Coins, Rising Sun Badge Vic Mounted Rifles, NZ Veterans Assn Badge, Victorian Education Dept Cert from Compulsory Attendance 1893, Native Pass from Pretoria October 1900stawell, boer war

NSW Mounted Rifles officer's mess dress waistcoat worn by Lieutenant William Augustine Newman (1873-1955) during the Second Boer War. Born in Campbelltown, NSW, William began working in the colonial public service at the age of eighteen. In 1899 he travelled to South Africa to fight in the Second Boer War as an officer of the 1st NSW Mounted Rifles. Returning to Australia in time for Federation on 1 January 1901, William rejoined the public service and was appointed to the original staff of Prime Minister Sir Edmund Barton, attending the first opening of Federal Parliament in Melbourne as Barton's private secretary. He went on to serve as the chief clerk of the Home Affairs Department, Commonwealth Electoral Officer for Victoria and official secretary to the Governor-General. In 1927 he was appointed Administrator of Nauru, a position he occupied until his retirement at the end of 1932. He retired to Brighton, where he lived with his family at 43 Martin Street until his death in 1955.Black NSW Mounted Rifles officer's mess dress waistcoat. Black superfine wool front, with black cotton back and cream cotton lining. The neck, front and bottom front edge are edged with gold metal lace and gold cording in an Austrian knot style. Two front pockets are edged in the same looped cording. The left front opening is edged with a row of decorative gold metal studs, with hook and eye fastenings underneath.Handwritten in pen on lining: "MESS WAISTCOAT / BOER WAR / LIEUT. NEWMAN / Gift of Mrs. D. Kelly, daughter".military uniform, nsw mounted rifles, boer war, william augustine newman

Original owner Nora O’Connor the donor’s adopted aunt migrated to Canada during WW2 and also worked as volunteer at the Vancouver Mission to Seamen where she met her husband Edward O’Connor who later migrated to Australia.Newspaper clipping from the 'Vancouver Sun' dated Friday, March 31st 1950. Clipping shows an a black and white photograph of W. Wootton Mascall, treasurer; Rev. John W. Leighton, chaplain; president Captain G. Lancaster and Margaret Ross, head of the Lightkeepers Women's Auxiliary. They are tying bundles of magazines at the Vancouver Seamen's Institute.SAILOR'S KNOT is expertly tied on bundles of magazines at Vancouver Seamen's Institute by Margaret Ross, head of the Lightkeepers Women's Auxiliary, Missions to Seamen. Aiding her bundle up the reading matter are, from left: W. Wootton Mascall, treasurer; Rev. John W. Leighton, chaplain , and president Capt. G. Lancaster.vancouver, canada, lightkeepers' auxiliary, mission to seamen, nora o'connor, edward o'connor, british columbia, overseas missions

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". It looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. Paragon knitting, crochet and tatting books have been distributed throughout Australia since the 1930's, originally by "Paragon Art Needlework Pty Ltd" of Sydney, N.S.W. From 1946 these books were designed and printed in Australia from patterns provided by British and Australian thread companies. Consequently these patterns may also appear in similar British and American publications. Paragon Book No. 104 is an instruction book designed for the "beginner" whilst Paragon book No. 105 is designed for the more experienced tatter. The layout of these books was typical of the 1940s period when paper was in short supply. Most of the pattern books were approximately 18 cms wide by 24 cms high and some were smaller at about 13cm by 21 cms. The type used was small (about four lines of text per centimetre) which was difficult to read. This item is an excellent example of a needle work pattern book available to women in the 1940's in Australia.A soft covered, 16 page instruction book titled "Tatting Designs". It has black and white photographs and detailed patterns for tatted doilies, a tray mat, a chairback and arm rests, a cheval set, a luncheon set, collars and edgings for an underskirt, gloves and handkerchief. It is published by Paragon Art Needlecraft of Sydney.Front cover - "Paragon's No 105" "PRICE 1/3" "Tatting Designs" "Household Linens * Personal Wear" Plus a stylized drawing of a deerflagstaff hill maritime museum and village, great ocean road, warrnambool, shipwreck coast, tatting book, tatting patterns, craft, handiwork, handcraft, needlework, shuttle

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots. The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century. Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". It looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. Paragon knitting, crochet and tatting books have been distributed throughout Australia since the 1930's, originally by "Paragon Art Needlework Pty Ltd" of Sydney, N.S.W. From 1946 these books were designed and printed in Australia from patterns provided by British and Australian thread companies. Consequently these patterns may also appear in similar British and American publications. Paragon Book No. 104 is an instruction book designed for the "beginner" whilst Paragon book No. 105 is designed for the more experienced tatter. The layout of these books was typical of the 1940s period when paper was in short supply. Most of the pattern books were approximately 18 cms wide by 24 cms high and some were smaller at about 13cm by 21 cms. The type used was small (about four lines of text per centimetre) which was difficult to read.This item is an excellent example of a needle work pattern book available to women in the 1940's in Australia.A soft covered 16 page instruction book with black and white photographs and detailed instructions explaining how to tat and eight tatting projects including how to make a collar and handkerchief edgings, published by Paragon Art Needlecraft of Sydney.Front cover - "PARAGON BOOK NO. 104" "PRICE 1/3" "Learn to/ TAT' Back Cover - "36/D5 E/A DO2" - handwritten in pencil flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, tatting, tatting pattern book, tatting instructions, handicraft, needlework, shuttle, tatting shuttle, paragon needlecraft, paragon craft book

In 1909, assistant Chaplain Rev. Haire presented the Mission with an 'uncommonly artistic pulpit' in memory of his mother. A plaque in memory of Jane King Haire can be found on the side next to the steps. The dedication was performed by the Archbishop of Melbourne on the 26th January (date engraves on the plaque) This pulpit was designed by Melbourne architect Rodney Howard Alsop (1881-1932) and manufactured by William John Dalziel (furniture manufacturer). It was initially used in the first Mission in Central Melbourne, Siddeley St. It is located in the Chapel of Saint Peter of the Mission to Seafarers 717 Flinders St. complex since 1917 (State Heritage listed (H1496). This complex was designed by Walter Richmond Butler in 1916, and officially opened on 11 September 1917, a day '...of unusually kind weather', by the Governor of Victoria, the Honourable Sir Arthur Stanley. According to a later article published in 1950: The pulpit is a model, built to scale, of the stern of an old ship of the line in Lord Nelson's day. This pulpit is significant as it is housed in The Memorial Chapel of Saint Peter forming part of the State Heritage listed Mission to Seafarers Victoria complex. It was built in Melbourne of Australian timbers, and is one of only two known maritime inspired pulpits, both associated with Missions to Seamen of the early 20th C. the other is held in the ANMM Collection see link. Their statement of significance is worth quoting in part as it applies equally to this pulpit "...an extremely rare and unique example of such pulpits. It is highly significant as a wonderfully preserved example of a time when religion was preached to sailors for their spiritual guidance and temperance..." Rodney Howard Alsop was an important Melbourne architect of the Arts and Crafts movement. John William Dalziel had sailed from Liverpool to Melbourne in 1862. Seventeen years later Penman and Dalziel founded the business in Lonsdale Street West, and won recognition at the Indian and Colonial Exhibition in London in 1886. Penman and Dalziel were identified in 1937 as one of Melbourne’s early ‘skilled craftsmen’ and ‘leading names’ in the manufacture of fine furniture. He died in February 1918 in a railway accident.Timber pulpit built in the form of a ship's stern including a timber step ladder for access, a timber keel and rudder, a rope fixed from the pulpit to a post mounted to the floor, and a dedication plaque on the side of the pulpit. The pulpit sits on timber legs. It's likely to be the original rope: traditionally made coir rope with twisted fibres, covered with canvas supported by a thread. At lower end the rope is secured by a monkey fist know and at the top by a turk head knot.Inside the pulpit (right) is the cardboard label with the maker details: " On an attached plaque see 0678 To the greater glory of God and in ever loving memory of Jane King Haire. This pulpit is erected by her son. Blessed are the pure in heart. For they shall see God. St. Matt. V.8. 26.1.09mission, seafarers, melbourne, victoria, chapel, saint peter, pulpit, australian timber, stern, walter richmond butler, australian maritime history, reverend w.f. haire, rodney howard alsop (1881-1932), wright's lane, william john dalziel, gifts-1917, heritage listed

Leather collar case in a horse-shoe shape (impressed leather 'shoe' with 'nails' on top). Top has stiched leather thin 'rope' in the form of a reef knot over the leather strap that closes the box. Hinged with single leather strap. Lining is a fine blue cotton material. A central circular leather stud box with leather handle has broken away from the internal base (due to very firm fitting lid to box?). 1920s-1930s?personal effects, containers, collars

From the Rogue Academy website: Over the last 100 years, volunteering has been the mainstay of the Mission To Seafarers. We were invited to create an artwork for the MTS centennial celebration, which was held in September 2107 In highlighting the essential nature of volunteering to the organisation, we further explored the richness and vitality of the MTS volunteer community by gathering information about the volunteer. We initiated conversations that sought individual stories, their role within the organisation and heir feelings, opinions and ideas about the generous act of giving time. This information was being used to create further artworks in the leadup to the September that highlight the impact and importance of your role at the Mission and the changes in these roles after the introduction of shipping containers. Food for Conversation recipe booklets which show old recipes that may have been served by the famous Ladies Harbour Lights Guild at their many functions, sea shanty evenings and volunteer BBQs accompanied the main even – a diiner at the exhibiion.The Rogue Academy is a social and participatory agency run by artists Amanda Shone and Fiona Lee that is working with the Mission’s volunteers to rethink the capacity of volunteering as a form of social engagement and unpaid labour in the 21st century. For Opening Night, they will host a casual dinner for Mission volunteers and their families, offering a hearty meal that would be the envy of the Ladies of the Harbour Lights Guild. As seats become available seafarers and members of the public will be invited to join in the conversation, and adding to the atmosphere will be three seafaring knotters.PerformanceSmall blue booklet with the Flying Angel logo in cover.mission to seafarers, 2017, 100th anniversary, sounding histories, the rogue academy, food for conversation, lhlg, ladies harbour lights guild, recipes, centenary, flinders street, cameron bishop, anne wilson, maree clarke, artworks, deakin university, fiona lee, amanda shone, dinner, volunteers, michael needham, catherine bell, bishop and reis, michael graeve, anne scott wilson, performance, installation, community, cultural events

King George VI was the second son of King George V and Queen Mary. He was Duke of York from 1920 to 1936, living in London and also (from 1932) at Royal Lodge, Windsor Great Park. In 1923 he married Lady Elizabeth Bowes Lyon; their elder daughter, later Queen Elizabeth II, was born in 1926. George VI succeeded to the throne on the abdication of his brother, King Edward VIII, in December 1936. Handkerchief produced as a souvenir for the Coronation of King George V1 and Queen Elizabeth on 12 May 1937. Images of the king and queen are set on either side of a circular view of Buckingham palace surrounded with representative flags and the Monarch's crown. Commonwealth (Empire) flags are placed at each corner. The British flag is below the image of the Palace. the flags are joined by a knotted circular gold coloured cord that traces the figures of the King and Queen. main colours are red, blue, white and gold on a cream background. handkerchief, coronation, 1937, king george vi

The donation records indicate that this dress was worn by Georgiana Elizabeth Moore (1899-1974), who lived for most of her life in Brighton at 38 and later 40 Cochrane Street. Since the dress is of an earlier date, It is likely that it belonged to Georgiana's mother, Elizabeth Moore (1860-1950). Georgiana was born to Richard and Elizabeth Moore in Brighton in 1899. She was named after Richard's first wife, Georgiana Leake Moore (nee Paul), who had died in 1893 aged only 38. Georgiana is recorded as having been "tall with red hair". The family moved to Diamond Creek for several years, but returned to Brighton after Richard's death in 1922. Georgiana and her mother settled in Cochrane Street, where they lived for the rest of their lives. We know very little about Georgiana herself. Newspaper records indicate that she was a talented musician, graduating from the University of Melbourne with a diploma in music in 1927. BHS holds a small collection of items belonging to the Moore family. This dress was donated by Georgiana's niece, Jeannette Fraser, along with two nightgowns: a c. 1880 night dress believed to have been worn by Elizabeth and a c. 1910 night dress believed to have been worn by Georgiana's sister Amelia Henrietta Fraser (née Moore) while boarding at Merton Hall (this nightdress does also show a laundry mark of G.E. Moore and so may have been worn by both women). Georgiana herself donated a number of items to the Society in 1972, including a 1920s black and white geometric loom-beaded handbag.A good example of a princess line dress of this period in good condition and with provenance.A one-piece princess line dress, circa 1878-1882 of deep royal blue silk featuring Chinese-inspired self pattern. The neckline features a standing collar and is secured through the centre front from neck to floor with self covered buttons. At the front knee the fabric has been gathered and drawn to the back into a tiered fish-tail swag and trimmed with a matching blue knotted fringe. The swagging is created by interior tapes. The dress is backed with cream cotton.georgiana elizabeth moore, elizabeth moore, amelia henrietta fraser, brighton

The 1888 Centennial International Exhibition, celebrating a century of Australian settlement, surpassed even the grand scale of the1880 Melbourne International Exhibition. It attracted over two million people, but the Victorian government had to spend £250 000 on it, ten times the amount estimated. The exhibition had a distinctively imperial focus, and a greater emphasis on culture than in 1880, particularly on music and painting (1). (1. https://collections.museumsvictoria.com.au/items/273830) S.D. Gadd was appointed Curator of Parks and Gardens in 1874 an lived in residence in Rosalind Park. He resigned in 1905 and moved to Melbourne where he died in 1917. Mr Gadd was a prominent member of the Masonic Lodge. It is not clear why he was awarded this medal.The bronze medal of the Centennial International Exhibition awarded to S.G. Gadd. Obverse - Portrait: bust of Queen Victoria in left profile wearing a crown, veil and 3 medals. Reverse - Field: Victor's wreath consisting of leaves and acorns of British oak and the leaves and acorns of the wattle. The oak and wattle were tied together 'by a true-lover's knot, 'symbolizing the unity and affection between the mother country and the colony'. Southern Cross inside surrounded by a legend. (https://collections.museumsvictoria.com.au/items/273822) Obverse - Motto: Centennial International Exhibition Melbourne Reverse - Legend: (Latin) Artibus Dignis Honor Insignis (To the deserving arts, distinguished honor) (Mint) left: Melbourne Mint. (Date) Lower Centre: MDCCCLXXXVIII. (Engraver) Right: Stokes & Martin S.C. Edge - Plain, impressed with S.G. Gadd ESQ.centennial international exhibition melbourne 1888, s.g. gadd, rosalind park, city of greater bendigo medals

This outfit was sent home to A.E. Tranter's daughter Brenda Refer to Cat 7944. Item in the collection of "Arthur E. Tranter". V50166 - VX52843 2/29th BN P.O.W.1. Top - dark red colour cotton satin fabric with light gold cover piping to garment edges. Handmade. Top has a mandarin collar, side to front opening and no sleeves. Knots and loops are used to close garment. Decorative ribbon fabric flowers at collar and neckline. Colours - pale pink, dark pink and yellow. Garment has been hand and machine stitched. 2. Pants - fabric as above. long wide legs to pants. Hand and machine stitched. clothing, ww2, arthur e tranter

Ribbon is for Efficiency Decoration.1. Battle dress woollen jacket. Khaki colour. Captain's Pips on epaulettes. Royal Australian Ordinance Corps shoulder flashes. Green and Yellow service ribbon above left pocket. 2. Trousers, Khaki. 3. Shirt Polyester, khaki, short sleeved. 4. Tie, Khaki, cotton/polyester. Has had an 'Ad Hoc" modification to stay knotted. Elastic under shirt collar. 5. Belt, black. Brass fittings inside still has signs of a green dye.post ww2, army uniform, passchendaele barracks trust

Textiles. Calico flour bag. Blue printed frame with following wording. "Contents 5lbs nett. Made in Bendigo. Quality and Value "Golden North Self Raising Flour. Made under the most Hygienic Conditions by the Golden North Manufacturing Co. Guaranteed to contain full strength Cream of Tartar The Flour that gives 100% Cookery Success" Boltons Print Bendigo. Three bags a. Good condition.Several small stains b. Faded with knots inneach corner c. Faded. Several small stainstextiles, domestic, utility bag

Flat irons were used for general ironing. Historical information Sad Irons (the term comes from an old word sald for solid) were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. A solid piece of cast iron, the base is triangular a shape with a ten centimetre base with curved sides coming to a point 15.5 centimetres from the base and is three centimteres thick. The bottom of the iron is flat. Two curved pieces three centimetres wide, half a centimetre thick and seven centimetres apart rise from rise up eight centimetres, between them is a two centimetre diameter and ten centimetre long hollow handle. Embossed on the iron is - 4 SILVESTERS PATENT SALTER and an arrow with a knotted rope around it. K5polishing iron, silvesters patent, sad iron

Tatting is a form of knotted lace making using thread and a small shuttle. Twisted threads are tied around or through small, pointed shuttles that can be made of bone, mother of pearl, tortoise shell, steel or plastic. This produces a stable, strong lace using simple knots of two half hitches to make rings and chains embellished with picots.The origins of tatting are not clear but early versions of decorative knotting were used by the Egyptians on their ceremonial dress. Tatting also has elements of fishermen's net making techniques and the decorative knotting that was practiced by aristocratic women from the 15th century.Tatting, as we know it today, emerged in the first half of the 19th century. The new availability of mercerised thread from 1835 encouraged a burgeoning of lace crafts of all sorts. It was known in Italy as "occhi" and in France as "la frivolite". Tatting looks fragile but is both strong and durable. An article in a column named "Wives and Daughters" published in the Star newspaper in May 1910 describes the durability of tatting lace - "there is edging and insertion still in existence that have outworn two sets of pillow slips." In the 19th century and well into the 20th century, tatting was used like crochet and knitted lace for decorative edgings, collars, doylies, tray cloths etc. At first, different tatting patterns were passed along by word of mouth from person to person, however in time, patterns regularly appeared in newspapers and magazines well into the 1950's. A shuttle is a small tool that looks like a small boat "sailing" in and out of the thread. Tatting is called "schiffchenarbeit" in German, which means "the work of a little boat". There are two popular types of shuttles. The first has closed ends and a removable bobbin where the thread is wound around - often made from metal or plastic (as is item 8535.1). The second type has a post in the center where the thread is wound (e.g. item 8535.2). The ends of this bobbin are open but snug. Because it is constructed in two pieces, it can be made from materials like bone, ivory or mother of pearl. Shuttles hold a larger amount of thread (as compared with needles) which means fewer ends to weave in. Fishermen in the past are thought to have used large shuttles to weave cord into certain knots whilst making their fishing nets. Their methods were copied by weavers, who innovated by using threads and smaller shuttles to make lace. One type of tatting shuttle produced by "Aero" from the 1930's to the late 1960's was an anodized grey coated aluminium shuttle with a sharp pick at one end. In the 1970's it was superseded by the grey plastic "Aero" which has a removeable bobbin which you can put on the end of the shuttle to make thread winding easier and an embedded crochet hook for joining picots. The "Aero" company developed in Redditch, England - a town renowned as a centre for manufacturing needles. Firms run by Henry Milward and Abel Morrall were based in Redditch and by the 18th century Redditch was manufacturing one million sewing needles per year. Abel Morrall Ltd launched the "Aero" brand in 1936 and greatly expanded the firm's product line to include tatting shuttles and knitting needles. The classic plastic "Aero" tatting shuttle was manufactured in England from the early 1970's until the 1990's. These items are significant as examples of easily accessible handiwork tools that enabled women in the 1930s -1960s to be able to decorate and personalize their household linen and clothing.Shuttle no. 8535.1 is a beige, boat shaped plastic shuttle with enclosed ends, small round central indentations on both sides and an enclosed black removeable bobbin. The shuttle has a grooved point at one end to hold a bobbin and a small metal crochet hook at the other end. Shuttle no. 8535.2 is a beige, boat shaped metal shuttle with pointed ends that are open but snug, small round central indentations and two smaller circular markings (on both sides) and two internal posts with cream thread wound around.Shuttle no. 8535.1 - "AERO" / "ENGLAND" Shuttle no. 8535.2 - "AERO' / "ENGLAND" "39c" (written in ball point pen)flagstaff hill maritime museum and village, flagstaff hill, warrnambool, shipwreck coast, great ocean road, tatting shuttle, aero company, handwork, handwork tool, craft, handcraft, needlework, tatting

As well as being an activist, Tilly Aston was also a published author and wrote several books during her lifetime. In this scanned image, from The Weekly Times newspaper, she holds her hand to her face and wears a flounced blouse with a multi-strand pearl choker and a heavy bangle which appears from underneath a decorated cuff. Her hair is swept up in a top knot and a large black bow, turned sideways, rests upon her left side. The photograph was printed as part of an article on the 'Principle Prize Winners of Prahran Competitions'.Black and white scanned newspaper imageMiss Tilly Aston (1st original story)tilly aston, weekly times newspaper

The ship's log part, called a fish, is likely to be from a mechanical taffrail log system. It was recovered from the wreck site of the barque, the 1840-1852 Grange. There are no marks on the fish to identify its maker or model. It is part of the John Chance Collection. This ‘fish’ is part of an early to mid-1800s ship's log. It would likely have been part of a taffrail log connected to a rotor (also called propeller, spinner) by a strong line, and the other end connected by a line to a dial mounted on the taffrail, or stern rail, at the stern of the vessel. As the propeller rotated through the water it would spin the log, which in turn would cause a number to register on the dial, showing the current speed in knots; one knot equals one nautical mile per hour. TAFFRAIL LOGS A taffrail log is a nautical instrument used for measuring the speed of a vessel, providing vital navigational information to be calculated, such as location and direction. A log has been used to measure the speed of a vessel since the 1500s. A simple piece of wood was tied to a long line and thrown into sea at the back of the vessel. The rope was knotted all along at equal distances apart. On a given signal the log line was pulled back into the vessels, the knots counted until the log came up, then the figures were calculated by a navigator In 1802 the first successful mechanical log available for general use was invented by Edward Massey. It had a rotor 'V' section connected to a recording mechanism. The water’s movement rotated the rotor, which intern sent the movement to the recorder. There are examples of this invention available to see in some of the maritime museums. Thomas Walker, nephew of Edward Massey, improved on Massey’s design, and Walker and his son took out a patent on the A1 Harpoon Log. In 1861. Both Massey and Walker continued to improve the designs of the taffrail log. New designs were still being introduced, even up to the 1950s. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown. The ship’s log is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The ship’s log is historically significant as an example of the work and trade of blacksmith. The ship’s log also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The ship’s log is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard. Ship log fitting, called a fish; part of a brass navigational instrument, likely to be from a taffrail log. The metal is a tan colour and has rough surface with a sheen, and discolouration in places. Its basic shape is a hollow cylinder with ends tapering to a smaller size. In the centre there are opposing openings cut out, showing a rough texture inside. One end on the cylinder is closed with a ring and shank installed, fixed by an embedded screw through the end of the cylinder. There are no inscriptions.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, vhr 5297, coastal trader, wooden shipwreck, john chance, wooden ship, taffrail log, marine instrument, marine technology, navigation, nautical instrument, mechanical log, nautical navigation, navigation equipment, scientific instrument, ship log, ship log register, ship speed, taff rail log, patent log, towed log, taffrail log fish, edward massey, thomas walker

10 hard covered, black books with red spine. The books contain the bound Victoria Education Gazettes for the 1930s. .4) Handwork in rural schools, Young Farmers' Clubs, Domestic Arts, Arbour Day, LEague of Youth of Australia. Health Education, Metal Trades, Industrial Studies, HOrticulture, Hinkler Memoria Trees, Musical Appreciation, British Breeds of Sheep. Train Journey Through Germany, History Handwork - Roman Times, Claude Seareby (photo), Norsemen, Techncical Schools Exhibition, Knots, Balllarat Junior Technical School Terraced Gardenseducation gazette, ballarat junior technical school terrace gardens

Polishing irons were used for ironing collars and frills. Historical information Sad-irons (the term comes from an old word sald for solid) were made by blacksmiths and used to smooth out material by pressing the hot iron over it. A piece of sheet -iron was placed over the kitchen fire and the irons placed on it could be heated whilst remaining clean of ash.. The women used 2 irons - one heating while the other was used. Thick cloth or gloves protected their hands from the hot irons. The cool iron was replaced on the fire or stove to heat again. These irons were cleaned with steel wool to prevent them marking the material. If the iron was too hot the material would scorch. Most homes set aside one day for ironing and some large households had an ironing room with a special stove designed to heat irons. However, most women had to work with a heavy, hot iron close to the fireplace even in summer. A solid piece of cast iron, the base is triangular a shape with an eight centimetre base with curved sides coming to a point 13 centimetres from the base and is three and a half centimetres Thick. The bottom of the iron is curved. Two curved pieces two and a half centimetres wide, half a centimetre thick and six centimetres apart rise from rise up seven centimetres, between them is a two centimetre diameter and nine centimetre long hollow handle. Embossed on the iron is - 4 SILVESTERS PATENT SALTER and an arrow with a knotted rope around it. K13polishing iron, silvesters patent, sad iron

A modern detailed replica to scale 1:200 of the early 20th C battleship launched in 1906. " The dreadnought class defined the basic form of battleships up to the 2nd WW. Original specifications: Length 526 ft; beam 82 ft; speed: 21 knots cruising Crew complement: 657; Armament: 10 12inch guns; 18 12 pdr guns( 4 shown on model) ; Engines: two turbines driving 4 shafts; weight: 17,900 tons fully laden; coal capacity 2977 tons; The ship was broken up for scrap in 1920 - David Lumsden donor and modelmaker Detailed Model of the Dreadnought 90% cardboard model of early 20th C. battleship one white ensign; on a polished wood plinth with cardboard hand lettered labels. Decks painted pale gunship grey and below waterline bright red. Model on polished wood plinth with bevelled edge.two card labels adhered to plinth: "David Lumsden 2014 Scale 1:72" "H M S Dreadnought"model ships, h.m.s. dreadnought, battleships, ww1, david lumsden

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The LEFT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The RIGHT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

From 1936, the Australians began to explore the feasibility of local production of steel helmets. Actual production by the Commonwealth Steel Company (in conjunction with Lysaghts) began in 1939. Made of manganese steel, it weighed about 1.1kg. Due to lack of machinery to bend manganese steel strip, the helmets were produced with a raw, but bevelled, edge. Almost two million helmet bodies were produced. Australian helmets were painted in sand textured Australian Army Khaki-Green No.3. A wide-meshed knotted net was often worn. The chin-strap was a copy of the British Mk.II. it was made with cloth covered springs and webbing.Green steel helmet with 8/7th RVR colour patch on each side

This item shows the excavation of the side of a railway track using a pneumatic shovel and a rail mounted truck by two workmen. The period covered was well before State Health and Safety requirements, such as helmets, became law. It also details that the workmen were from European heritage as their head coverings were a handkerchief knotted at each corner. This was typical for workmen of this heritage, others used caps or hats or no head covering at all (the macho male look)The photograph of this item was one of many depicting great achievements and opening up the region. A visual link or time capsule of the 1950s rural/mining sectors clashing with the established rural industriesThis photo depicts the time (1950's) and place (Bogong and Mount Beauty) where construction workers had an immense impact, not only on the physical environment but also on the social and economic development of the Victorian Alps region. The fast expansion of smaller settlements brought about increased pressures on the welfare viability of certain subgroups within the region e.g. farming, droving and commerce (caravan hawkers versus static shops). These changes brought about a heightened awareness by both local and State Governments to upgrade not only facilities within the region but also access to the region. Black and white photo of two workmen on a rail mounted shovel truck. The photo is of good definition allowing a clear view of the subject matter. The paper is semi gloss.On the back of the photo, paper suppliers etchings are "Kodak XtraLife II paper"mining, hydro electricity, victorian alps, construction camps, earth moving machines