Set of four nickel silver MMTB Coat buttons with brass backs and a sewing lug or ring on the rear. All of the items are made by Buttons of Birmingham - name stamped into the rear section. Two large - 22mm diameter and two 15mm dia. Received in a small envelope with information that they were issued by the Interim Tramway Board. The design appears to be similar or identical to that of the MMTBIn a small manila envelope "2 large and 2 small buttons issued by the (interim) Tramways Board on their uniforms of its cable tram crews"trams, tramways, melbourne tramways, uniforms, buttons, tramway board, cable trams

Not clear whose Army. Hulse Company made leather belts in Aust.1. GREEN ENAMEL WATER BOTTLE. THE CAP IS A STEEL ONE WITH A "BAYONET" LUG. A SMALL STEEL CHAIN HOLDS CAP TO BOTTLE. THIS IS SMALLER THAN STANDARD BRITISH PATTERN. 2. CARRIER LEATHER WITH STRAP. THE STRAPS AROUND BOTTLE ARE 25MM WIDTH. THE SHOULDER STRAP IS 50 MM WIDE. LEATHER IS BROWN. THE 50 MM STRAP HAS A BRASS ADJUSTING BUCKLE.The Broad belt has several: Holden (?) (FRE) 1913. The name "HULSE" is stamped twice on the belt strap.equipment, water bottle, army, passchendaele barracks trust

Items issued to John Michael Martin No 2396 A.I.F. Refer Cat No 4567.3 for his service details and true identity..1) Badge, brass, round with Crown at top, “Returned from Active Service”, two lugs on rear for clothing attachment. .2) badge, round, metal, centre has crown and lettering, rear has one single long pin. .3) Badge, metal, plaque shape, coloured, Crown at top with RSL membership clip “1919” denoting a member in 1919..1) Front, “Issued by Department of Defence, Returned from Active Service A.I.F” Rear stamped “187836”. .2) Front, “For King and Empire, services rendered”, rear stamped “92849”. .3) Front, “Returned Sailors, Soldiers Imperial League Australia”, stamped on rear, “R1197”.badges, active service, membership

The helmet was captured by William J Hanna, Royal Irish Fusiliers. Hanna was wounded during the 1916 Battle of the Somme.World War One German Army steel helmet. The outer surface is painted. Two lugs/ventilation holes are visible on each side. Rivets securing the missing headband are also visible. The front of the helmet has an extended visor whilst the back and sides also project to cover the nape of the neck and ears. Inside on each side are attachment points for a chin strap.helmet, german army - ww1, military equipment, uniforms - army, headwear

.1) Returned from Active service badge, this one relates to WW2 onwards..1) Badge, brass, top has crown over rising sun, wings and anchor under is a boomerang with "Returned from Active Service". Rear has 2 lugs and pin. Badge is number stamped. .2) Medallion, round, copper, front has the king, rear has depiction of a ship at sea, under is "For War Service Mercantile Marine 1914 - 1919". .1) “Property of C/Wealth Govt AF 20148”badges, medallions, service, mercantile

Charles "Watty" McLeod No 944 enlisted in C Coy 38th Batt AIF on 25.2.16, embarked for England 20.6.16. Hospitalised at sea with "Chill"1916, Gastroenteritis 1916, WIA 1917 "Gassed", hospital again in 1918 with Debility. Discharged from the AIF on 30.4.1919 with the rank of Cpl. Refer 1644P, 1645..1) Medal set, court mounted, set of (2) Re C.W McLeod. 1. War Medal 1914-1919. 2. Victory Medal, replacement, not engraved. .2) Badge, bronze "Returned from Active Service". Round with Rising Sun and scroll with "Australian Military Forces AIF" in centre and crown atop. Rear is stamped with a number and has 2 lugs for attaching to clothes..1 "944 Cpl CW McLeod 38 Bn AIF" .2 "Issued by Dept of Defence Returned from Active Service 111659"medals, military, active service

Auxiliary board or sign for the front of tramcars providing destination details - using heavy stiff plastic black board, with the words "St Kilda Beach" on one side and "North Richmond" on the other. Letters formed from white plastic adhesive material. Would have been used on the route 78 service. Has two aluminium pressed metal lugs on either pop riveted to the board.trams, tramways, sign, north richmond, yarra trams, st kilda beach

Pair of black Garmont leather ski boots for cross country skiing with padded orange fabric lining at entry point. 6 metal hooks and 8 metal eyelets for lacing boots (no laces included). Thick rubber over leather sole- protruding toe lug. Leather upper shoe. Padded leather tongue attached to boot with a red and white leather Garmont name tag attached.Embossed brand name Garmont on outer sides. Size 37 inscribed in white paint on each heel.

This late 19th century maritime lamp is an example of lighting on ships, wharfs and other outside areas around docks and shipyards as well as on vessels.Lamp; grass and glass, with flat metal back and three glass windows. Has metal handle and wood hand piece. A brass lug on the back makes provision for attaching to a socket on a wall. The chimney lid flips upwards. The right-side door frame has a sliding latch, and the edge behind has a sliding panel to allow air flow. Made in Birmingham by Alderson & Gyde Limited in 1886."Alderson & Gyde LTD 1886 Birmingham" flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime museum, maritime museum, maritime village, alderson & gyde ltd, birmingham, lamp, lantern, wall lamp, marine equipment, maritime light, wall light, 1886, ship lighting

Use to identify a tramway employee - Clifton Hill car house or depot. Would have allowed free travel when in uniform to and from work. Used possibly from mid 1910's when the Tramway Board was formed until it was replaced by the MMTB in 1921 or when a different identification system was implemented. Most likely made by Stokes and Sons - possible imprint covered by the leather part.Demonstrates the method of identifying cable tram employees. Round pressed brass badge with the words "Gripman" pressed into the centre of the badge around the top portion of the badge, the letters "C13H. Has a nickel-plated finish with the Tramways Board logo on the lower part of the badge. On the rear of the badge, two metal lugs have been soldered onto the badge and a two-piece leather strap with a buttonhole cut into it to enable it to be worn on a uniform. See item 7339 for a Conductor badge. badges, tramways, trams, employee pass, tramway board, clifton hill depot, gripmen

Items in collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details..1) Badge pressed brass, shape is of an old style Artillery piece on large wheels, rear has two lugs on. .2) Badge, metals crown at top, centre has 5 stars in silver, outside is oval shape with lettering, scroll under, rear has two pins. .3) Badge silver colour metal, crown at top, oval shape, raised lettering, scroll under with same, pin on rear..2) "Royal Australian Army Pay Corps, Integrity" .3) Royal Australian Army Nursing Corps, Pro Humanitate"badges, artillery, nursing, pay

Belonged to Capt Warick Rosenthal No TX6321 AAMC. Refer 622.3, 775. .1) RSL Membership Badge with clip "53" denoting financial member 1953. Badge has 3 figures with a blue circle around, under is a scroll in red, rear has a clip with pin & numbered. .2) Returned from Active Service Badge, blackened brass, crown over rising sun, wings / anchor / Boomerang under with words "Returned From Active Service" Two lugs and pins on rear..1) "Returned Sailors Soldiers Airmen Imperial League of Australia" On rear "V1314" .2) On rear "211849"rsl, military history, military service, active service

The badge (on the right) is a Female Relatives Badge from the Second World War and the stars represent the number of serving individuals related to the holder of the badge. A number of the back appears in a register that records the name of the holder. .2) Three stars denotes 3 members of the family in the army in 1939 - 1945..1) Badge, brassround with 2 lugs on rear. Front has "War Worker Australia". Centre is coat of arms. On rear is "Navies & Labourers". Stamped numbered badge. .2) Female relative badge. Metal, silver colour, round shape with crown. wreath arrangement with map of Australia centre. Rear has pin attached. Attached by two small chains is a clasp with 3 small bronze stars. Rear of badge is stamped..1) :"Issued by the department of defence, 618. .2) Front "To the Women of Australia" Rear "Issued by the C/Weath Govt. A6800badages, medallions, female, relative, war workers

This mask set is part of the North East Region Water Authority collection in the Wodonga Historical Society. Wodonga's drinking water and wastewater operations were originally managed by the Wodonga Waterworks Trust, which was established in 1897, after Wodonga became a separate shire in 1876. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. And by 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water. Siebe Gorman was a British manufacturer of industrial respirators that served the mining industry, the chemical industry, and the agricultural industry from 1938 until the 1980s. The "Puretha" line refers to the canister included, which was designed to tackle industrial hazards.Siebe Gorman "Puretha" Type C Kit with Vista Vision Facepiece. The facepiece consists of a formed plastic lens held on by a white retaining ring that stretches around the rubber facepiece and is connected by two thumbscrew lugs. The exhale assembly is covered by a steel mesh.The hose is a standard industrial hose. The canister is attached by a khaki webbing material. An instruction sheet is included. The kit is a small leather case with two front latches. Safety instructions and chemical information on canister label. On label: EVERYTHING FOR SAFETY EVERYWHERE Date filled 28 DEC 1961 NO. 675 north east region water authority, gas mask, respirator, sieba gordon

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

.1) Oxeford Shire & Buckingham Shires Light Infantry. .3) Cheshire Infantry Regiment. .4) 18th Royal Hussars Cavalry. Items in the collection re John D Gardiner No 2832, refer Cat No 5892.2 for his service details..1) Badge brass curved shape all lettering with two lugs on rear. .2) Badge pressed brass crown at top, wreath and Serpent, scroll at bottom, pin on rear. .3) Badge pressed brass, 8 sided star with central motif, scroll under with raised lettering, pin on rear. .4) Badge pressed silver colour, crown at top, central circle with raised lettering, wreath under and pin on rear..1) "OXE & BUCKS" .2) "Royal Army Medical Corp". .3) "CHESHIRE" .4) Queen Mary's Own".

John Killeen No 1323 4th L.H Regt. Refer Cat No 2824 for his service history. .1) Badge, Rising Sun lapel, blackened brass with two lugs on rear with pin. .2) Badge, Returned from Active Service, crown at top, circular centre with Rising Sun and letters AIF under. .3) Badge, “Duty Bravely done - Returned” Top has a soldier standing in front of a Rising Sun, under is a wreath surrounding a plaque with a light and dark blue colour patch presenting 4th L.H Regt..2) “Returned from Active Service-Issued by Dept of Defence” .3) On rear “Presented to Pte J Killeen by the residents of Korong Vale and District on his return from the Great War 1914-19-21.7.20”membership, badges, passchendaele barracks trust

This is the cutting bit on the end of a drilling rod. It would have been used to drill holes into rock for placing explosives, for installing steel rock anchors, etc. In hard rock the bits need to be replaced regularly. Compressed air is blown through the holes near the tip of the bit to blow rock fragments out of the drill hole. The main drilling unit would have been powered by compressed air (Pneumatic). Rotary Air Blast Drilling. This drill bit was used by workers in the SEC Vic. Kiewa Hydro Electricity Scheme. This type of bit although strong needed replacing frequently when the rock composition (type of rock) was extremely compact. The configuration of the tip bit (four star like pattern) was to provide the "teeth" to tear into the rock. This bit was manufactured in 1949 however drilling for rock cores, in the Kiewa Valley and the Victorian Alps, was carried out from the late 1920's.This particular drill bit would have been used by construction workers to drill holes into rock for either explosives or for installing steel anchor points into the rock. The use of compressed air was not only for waste extraction but also for running the main drilling unit.This four star rotary air balst (RAB) drill bit has a central "blow" hole (compressed air outlet to remove the ground rock particles through four extraction holes). There are four raised cutting/grinding lugs which allows the air compression hole(incoming) to always have a clear unblock opening. Extracted ground material is "blown" out from the drill head via the larger hole created by the steel bit.Stamped on the bottom outside shank "FAGERSTA SECO SWEDEN" and below this "102 7041 01 05 049".sec vic kiewa hydro scheme, alternate energy supplies, drilling into rocks in alpine regions

Auxiliary board or sign for the front of tramcars providing destination details - using heavy stiff plastic black board, with the words "Via Flinders St (anti-clockwise)" on one side "via La Trobe St. (clockwise)"on the other. Letters printed onto the plastic sheet. Would have been used on the route City Circle service. Has two steel sheet pressed metal lugs on either pop riveted to the board.trams, tramways, sign, city circle, la trobe st, flinders st

Empire Wounded Stripes were introduced in 1916. Each time a soldier was wounded and taken out of the field he was entitled to a stripe. Worn on the left sleeve below the elbow on your uniform These items belonged to Frederick Campbell Moller No 2233 AIF. Refer1661.3, 1663P, 1680.3..1) .2) "Empire Wounded Stripes" metal, base plate with Stripe resembling gold braid fixed by two pins through the plate. .3) Rising Sun collar badge, blackened pressed brass with 2 lugs on rear. .4) RSL Membership badge, metal, enamelled, crown at top with two central figures. .5) Association Badge, 3rd Field Arty Brigade, copper wishbone shape and Field Artillery motif blue & red enamel..1) "Service Wounded Stripe" .2) "The Wounded Stripe" .3) "Australian commonwealth military forces" .4) "Returned Sailors, Soldiers Imperial League of Australia"numismatics - badges - military, metalcraft - brassware, wia, rsl, association

Badge or medallion issued to wives of first world war veterans. Round cast brass with a small lug or attachment point on the top, finished with a high gloss lacquered finish. Rear finished with a slight stippled finish, with the words "Not Transferable" and the name of the manufacturer, "Swan & Hudson" cast in. Yellow background with the words "World War 1 Veterans Wife" and the number "507" stamped into a gold background. See Reg Item 811 for the one issued to veterans and widows of veterans.trams, tramways, badges, world war 1, tickets

1891 Paris - Bordeaux Cycle Race started in the Place du Pont Bastide in Bordeaux. So the name Bastide was already known to cycle enthusiasts even before the cycle manufacturer made its first iconic bicycle.The Bastide frame was built from top quality English Reynolds tubing with lugs and fittings provided by BSA. (Birmingham Small Arms Company ). Bastide, was based at Boulevard de Clichy, Paris and turned these fittings into a totally superb racer. Leon (Jack) Meredith,UK Olympic Cycling Champion, of the Constrictor Tyre Company, was responsible for importing the first Bastides and displaying them at the 1913 Olympia Cycle show where they were the sensation of the show. The Bastide, though almost as expensive as top range cycles, was fitted with a single brake and gear and no trimmings and was lighter, slimmer and faster Weight 15lb. ( 6.8Kg) Bastide stopped making frames in 1936. Bastide was the bike that changed the style for road bikes in England for ever more after the First World War 1914-18 and this bicycle was used by Mr L Forde in Moorabbin Shire c1910A Racing Bicycle c1909 'BASTIDE"Frame Bastide Frame Stem ; Perfect / BUILT BY / CANADA CYCLES / & MOTOR Gear wheel ; BSAparis-bordeaux cycling road race, bicycles, bastide bicycles paris, birmingham small arms company uk , meredith leon jack , olympic cycling, road races, cycling clubs, cheltenham, moorabbin, victoria, geelong, werribee, whitehead clarice, whitehead eric, world war 1914-1918, early settlers, moorabbin shire, bentleigh,

.1) Badge "Rising Sun", lapel, pressed blackened brass, Rising Sun with crown centre, scroll under with "Australian Commonwealth Military Forces" 2 lugs on rear. .2) Button, round, metal, has crown above map of Australia. Around outside. "Australia Military Forces". .3) Button, same as .2) .4) Button, round, metal crown at top over a centre cross with 5 stars. Around outside "AUT PAC AUT BELLO'uniforms, buttoons, lapel, rising sun

When this AVOMETER leather case was being utilised in the early 1950's it contained the "leading" edge of electrical measuring instrumentation.The first meter was produced by Automatic Coil Winder and Electrical Equipment Co. in 1923. This model was produced in the time from 1933 to 1951 when it was superseded by the most popular model, Model 8 (1951 to 2008).This leather case which holds its AVO Meter brought the measuring of three electrical power indicators i.e., amps, volts and ohms into one measuring unit. By using a "one fits all" unit, the carrying of separate measuring devices was reduced considerably. The need for a mountainous and a large area of operational requirements, such as the SEC Vic Kiewa Hydro Electricity Scheme, to minimise the weight of equipment carried by electricians and technicians was of the utmost relevance. The significance of this meter to the Kiewa Valley region relates to the impact of modern technology (at that time) upon a mainly rural environment. This equipment shows how the boost of "modern" equipment into the area because of the "Hydro Scheme" was facilitated a lot faster than would have taken under "normal" evolutionary time. The speed of information on all "new technology" had a relatively slow assimilation rate to those living in rural communities. The use of solid leather carrying bags for transporting equipment up and down the mountains provided some form of protection against bumps and dust.This carry case for its AVO meter has an outer leather covering with an inner thick cardboard liner. The case has two mild steel buckles but stitched onto one side but no lid to fasten down. The sides are stitched together with strong tick twine. On either side there are small strap holds. On the bottom are four large chromed metal lugs acting as feet to keep the bottom from lying flat on any floor. The outside bottom has been branded "SOLID COWHIDE"Between the front two buckles is a identification plate riveted onto the cowhide "STATE ELECTRICITY COMMISSION OF VICTORIA ELECTRICAL ENGINEERING SECTION"electrical meters, electrical equipment, sec vic., state electricity commission of victoria, mount beauty, bogong village

Object. Light Infantry Hat Badge, dark metal Bugle horn Badge with looped tassels above it, symbolizing the Rose of York. The badge is mounted on a brass disc (dia.4cm). Three lugs on the badge with two holding pins. The bugle horn badge was first introduced by the Germans in the 1700's. From the 1700's each British Foot Regiment had Light Companies (more mobile and loosely organized). These became Regiments in their own right, which were then called Light Infantry.numismatics, badges - military, light infantry hat badge

One worn TB uniform clothing buttons donated by a former Ballarat Tram driver. Button about 23 diameter, with TB crest, with backing piece and lug for sewing on rear. Nickel plated silver? Badge has been worn on a jacket as in poor condition compared to new. Has name of manufacturer stamped on rear part - "Buttons Ltd" of Birmingham, England with their trade mark, a pair of fully opened scissors. See tm1762i2 for image. Donor of items 1259, 1260 and uniform jackets.tram, trams, mmtb, melbourne tramways, uniforms, buttons

Two member badges from the The Returned Sailors, Soldiers Imperial League of Australia (RSSILA). The number 68 on the front could be 1968 as it is detachable and could be updated each year. The badge with 1921 could be the year of membership. The member number is engraved on the rear. The shield design is symbolic of the protection provided to those who wear it. Within the badge, red represents the blood ties of war that exist between comrades; white stands for the purity of the motives in joining the league – to render service without personal gain or ambition; and blue indicates a willingness to serve a comrade anywhere under the blue sky. The wattle represents Australia, with the leek, the rose, the thistle and the shamrock standing for Wales, England, Scotland and Ireland respectively. The RSSILA was the precursor to the Returned Services League (RSL) and provided support for returned servicemen after World War One. Worn by members of the Returned Sailors, Soldiers Imperial League of Australia, those eligible being members of all services, both wars, including nurses, who have returned from active service outside Australia. These were with other World War 1 memorabilia that has come from Private John Basil McLean, 2nd Reinforcements, 37th Battalion, A.I.F. J.B. McLean (Service No. 13824) was from near Maffra, Victoria and enlisted on 22 January 1916. He embarked on 16 December 1916 for Europe. He spent time with the Australian Field Artillery (Pack Section). At the end of the war he worked for a year at the A.I.F. Headquarters in London before returning to Australia on the 'Ceramic', arriving in Portsea in 1920. His full war record is available from the National Archives of Australia (B2455, MCLEAN JBM).The RSSILA was an important organisation for ex-servicemen and many Legatees would have been members.Enamel badges from the R.S.S.I.L.A. The centre of the badge shows a sailor and a soldier in raised detail. A blue enamel circle surrounds the central detail and has 'RETURNED SAILORS & SOLDIERS / IMPERIAL LEAGUE' in gilt lettering. The outer edges of the badge are white enamel with a floral spray to the top left and right of the blue circle. At the bottom of the badge is a red enamelled scroll with 'AUSTRALIA' written in gilt lettering. On the reverse of the badge are soldered two brass lugs with a split pin attached for securing the badge to clothing. 01124.1 Front has '68' and 'Returned Sailors and Soldiers Imperial League of Australia'. On the reverse 'V92210 Badge remains the property of League'. 01124.2 Front has '1921' and 'Returned Sailors and Soldiers Imperial League of Australia'. On the reverse 'R 3871' and 'C.C Roeszler and Son Pty Ltd Melb.'world war one, rssila

Badge or cap badge, nickel-plated brass? for MMTB caps - letters TB combined together. Has two metal lugs soldered onto the rear to enable it to be fixed to a cap. In the middle on the rear the manufacturer's name "STOKES" is stamped into the badge. 2nd copy added 1/12/2019 from donation of Wendy Medley 3rd copy added 5/9/2021 ex Ron Scholton. - Name of manufacturer - Stokes has been cast into badge rather than being stamped.trams, tramways, badges, cap badge, mmtb, uniforms, crews

Coin dispenser or change holder, provided for use on Z class trams - holds 6 types of coins, spring mounted equipment. Has a top entry point and a spring mounted lever that dispensed one coin at a time. Has two lugs on rear to enable it to be clipped to the conductors desk. See Reg Item 4543 for the photographs of an MTT Adelaide set up and Reg Item 4619 for the ticket clip. Two copies held. On the rear of the two items are numbers 1602 and 1614 scratched in.trams, tramways, tickets, conductors, ticket machines, coins