Book - green Rexene covers, with title - "Melbourne and Metropolitan Tramways Board - Works Codes and Instructions". Six sections, sewn into covers, dated April 1961, signed by J. J. Fisher, Civil Engineer. 118 pages plus covers. Book numbered "46". Provides an list of contents, giving provisional codes or instructions for works, instructions, about the maintenance and repair of the track welding, safe working, watchmen, care of lamps, and plant.On first page a signature in ink - "W. Armstrong"?trams, tramways, mmtb, track, maintenance

Used by tram drivers to warn road users of their presence or starting to move. MMTB drawing R8808 shows the mounting mechanism and operation. Demonstrates a tramcar warning device used by drivers.Cast steel and fabricated steel foot gong, consisting of cast bell, weighted striker or clapper operating mechanism and parts to enable it to be attached to the underside of the tramcar or driver's platform. The Foot gong plunger is missing. The clapper part has been extended by welding a section of steel onto it and a rolled section of stainless steel wire has been attached to ring it remotely from an overhead position. The item has been cleaned and varnished.tramcars, tramcar equipment, equipment, gongs, foot gong, drivers

The Australian Chain Manufacturing Co. was formed in 1933 to acquire the business of Luigi Benini who had started his business in Cardigan Street, Carlton with William Johnson McCredie.Catalogue for steel welded and weldless chains. The Australian Chain Manuacturing Company Pty. Ltd. A light cardboard cover in a green/brown colour. Nine paper pages with lists of costs and illustrations of types of chain. It has two metal staples in the spine. There is an ink stamp on the front cover with a sole agent of Gollin &Company 561/8 Bourke st Melbourne. Printed by The Imperial Press, 678 Elizabeth Street Melbourne in B&W ink.

"William (Bill) Clark was engineering manager with Fruehauf tractors, and now starts life as a minister at Kaniva. He'd been in transport engineering for almost 30 years before studying for ordination. The children, both grown up, one married, will remain in Melbourne. Bill told me he enjoys working with people and looks forward to the opportunity to share with lay people who know their community, in communicating toward and with the whole community the love and concern of the gospel. Margaret, his wife, enjoys gardening, crocheting, reading and walking. Bill says his other interests are practical work, including welding." 2017 - retired minister.The two photos show head and shoulders of a middle-aged Clarke.C&N identification.clarke, william, margaret clarke, uniting church minister

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The LEFT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The RIGHT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

Copy of two page computation of Poppet Legs Monument for Long Gully History Group, dated July 02. The first page is Framing sizes (proposed) and the second page is Base Details. The first page details the type of materials and sizes to use, the names of the various pieces and the lengths. Frame to be Hot Dipped Galvanised. The second page details the size, concrete strength, chamfer on edges of base and insertions into concrete to weld the legs to. Both drawings have a graph paper background.bendigo, history, long gully history group, the long gully history group - poppet legs monument for long gully history group, osborne consulting group, howard terrace

Demonstrates how tram tickets could be punched and the manufacture of ticket punches.Brass cast, chrome plated, machined, device or ticket punch, used to cancel or punch paper tickets when purchased. Placed a round hole in the ticket. Spring loaded, consists of two main parts with a pin & spring in addition. . Chrome plate has been partly worn off. Secured by three screws, which are unusual. There are no manufacturer markings or numbers on the punch. Punch is very heavy in construction compared to other punches in the collection. Has been repaired by welding.trams, tramways, ticket punch, tickets, fares

The Ballarat School of Mines was established in 1870 through initiatives of the Ballarat Mining Board which felt there was a need for such an institution because of the declining number of mine managers for the goldfields. In c1990 campuses of the Ballarat School of Mines were: Barkly Street (Business and Computer Studies, Hairdressing and Horticulture apprenticeships); Agriculture Training Centre at the Ballarat Common, Ring Road; Davey Street (Carpentry and Joinery); Ararat Campus (Business Studies, Electronics, Welding, short courses); Lake Bolac TAFE Centre (Woolclassing, Post-Primary Service Programs); Ararat Prison (Basic Education and Training Programs) Howitt Street (Bricklaying); Ballarat Airport (Motorcycle Rider Training Facility.13 page soft covered promotional book covering the Ballarat School of Mines. The book includes an historical overview, timeline, Inskill, enrolment profile, student support, E.J. T. Tippett Library, Amenities Building, L.F.J. Hillman Recreaton Centre, Hillman, Tippett. There are numerous black and white images.ballarat school of mines, ballarat mining board, peter shiells, shiells, morgan john, john cain, timeline, inskill, small business centre, leoda atkinson, m.b. john

Articles in the annual report include: establishment of the Charter for the Eighties committee to develop on the role and direction for the organisation, decision to close Alexis Albert Hostel and move residents to Lighthouse Hostel Roselands or cottage style accommodation due to increasing repair costs, increased demand for field service (but not funding) and standard cassettes from the library, new Braille production unit shared with RIDBC, further bicycle order for Dubbo Zoo, large order for PVC sleeves justified new PVC welding equipment, Talking Book of the Year award and "Art in Touch" exhibition (both created to celebrate 100th birthday in 1980) will continue, and departure of Graeme Bradshaw, Jack Chamberlain and Mavis Threlfo.1 volume of text and imagesroyal blind society of new south wales, corporation records

Third Annual Report of the Footscray Tramway Trust, for the year ending 30/9/1919. Lists the Trust Members, Consulting Engineers, and Secretary. Details the Trust's activities, finances, and a short review of activities noting the supply of energy from the Victorian Railways Newport Power Station. Engineering report by Christie & Gardiner detailing the construction, welding of joints, tar surfacing, substation equipment, fitting equipment to the seven ex HTT tramcars at Footscray, delivery of equipment for the tramcars, but a delay in the delivery of the trolley wire. There are four pages of accounts and one page for the Auditor's statement. The Trust was taken over by the MMTB during Feb. 1920 who completed the work and commissioned the tramway.Yields information about the construction of the Footscray Tramway Trust tramways.Eleven foolscap sheets, duplicated, pinned with a removable foldable clip in top left hand corner. Two copies held.tramways, tramcars, ftt, footscray tramways trust, new tramways, rails, tramway construction, annual reports, htt

Clive MURRAY-WHITE (20 February 1946 - ) Born Walton-on-Thames, Surrey, England Arrived Australia 1959 With an impressive career that has included sculpting marble for over 25 years Clive Murray-White has informed his at practice by studying at Brisbane Central Technical College, Guildford School of Art, United Kingdom, Royal Melbourne Institute of Technology and Preston Institute of Technology, Monash University. His early work used welded and cast metal objects. In the 1980s he transitioned to marble sculpture Clive Murray White was Head of Sculpture at the Monash University Churchill (now Federation University Gippsland). He established the Cowwarr Art Space with Carolyn Crossley. Sculpture of a head carved from Cooper's Creek Black Limestone. artwork, artist, sculpture, gippsland campus

Clive MURRAY-WHITE (20 February 1946 - ) Born Walton-on-Thames, Surrey, England Arrived Australia 1959 With an impressive career that has included sculpting marble for over 25 years Clive Murray-White has informed his at practice by studying at Brisbane Central Technical College, Guildford School of Art, United Kingdom, Royal Melbourne Institute of Technology and Preston Institute of Technology, Monash University. His early work used welded and cast metal objects. In the 1980s he transitioned to marble sculpture Clive Murray White was Head of Sculpture at the Monash University Churchill (now Federation University Gippsland). He established the Cowwarr Art Space with Carolyn Crossley.Marble sculpture of Hygia, the Greek goddess of health and healing. Daughter of Asciepius the God of Medicine, Hygeia symbolises the preservation of good heallth and prevention of illness. Presented to the Gippsland Medical School from the Campus. churchill, gippslands campus, clive murray white, sculpture, clive murray-white

Bell was presented to the Melbourne Legacy Club by the departing president E.R.F. Serman in 1929. It was used during Comradeship Committee meetings.E.R.F. Serman was the Melbourne Legacy Club president in 1928-1929. Comradeship Committee meetings were very important to the Legatees.18 Pounder Shell casing that has been polished and had a small brass hook welded to the base. The casing has been split and bears the signs of being hit with a hammer. There is an inscription engraved on the front. The shell is hung from a brass arch which has been mounted to a wooden base. Two small brass hooks on the base act as a mount for the mallet. The brass arch and hooks are attached to the wooden base via flat head screws from the underside. The mallet is constructed of a brass rod with a felt head.Presented to the Melbourne Legacy Club by E.F. SERMAN PRES.1928-9comradeship, committee, legatee event

Demonstrates how suggestions to Management of the SEC depot were made by tram employees and has a strong association with the tram crews.Sign - made from sheet metal, folded and welded to provide a suggestion box for the Ballarat Tram Depot. Has the word "Suggestions" in large Red capital letters, a large tray or box for receiving the suggestions (not too sure how you got them out without undoing the sign and shaking the items - if any - out) and an area for an instruction to be displayed. Painted both sides in a cream colour (SEC tramway cream). Has two screw holes in the top corners. See Reg 3769 for a booklet on the SEC suggestions Scheme/Has pencil marked on the top horizontal white line "369375 2 ? and 309981 1 ? 18th Oct"trams, tramways, sign, sec, depot, crews

Bell portion of a tramcar conductor's bell. Approximately. 100mm diameter, about 35mm deep with a raised or bossed hole at the top 4.5mm at the top. Bell possibly cast or pressed brass, appears to have been damaged or repaired due to excess brass in portion of the bell and on the underside where signs of brass welding are apparent. If from a horse tram, would have most likely been made by Duncan and Fraser of Adelaide SA. Given to the BTM 1995 by Doug Prosser, of the TMSV, said to be from Ballarat Horse Tram No. 1. horse trams, duncan & fraser, conductors bell, tramcar component

Newspaper cutting from the Letters to the Editor Section of The Courier, Ballarat dated Friday 2/8/2002 regarding the reintroduction of trams to Ballarat. Has a photo of Allan Snowball working (welding) a rail joint in Wendouree Parade. Letter to the Editor titled - "Lake tram may be way to go" - written by Graham Jordan questioning the City Tramway proposal. Letter to the Editor, by William J Hoath titled "Who will subsidise cost of the trams", questioning who would pay when no one is on the trams and what is councillors position on this?ballarat revival, letter to the editor, ballarat city tramway, lake wendouree tramway

This silver wool-holder was sold as a souvenir at the British Empire Exhibition of 1924-5. This exhibition was staged to strengthen the bonds of the British Empire and 56 of the 58 nations or territories within the Empire participated. Wembley Stadium was built for the Exhibition and called then Empire Stadium. 27,000,000 visited the exhibition in the two years of is existence. Wembley Stadium survived until 2003 when it was rebuilt. This wool-holder is of interest as an example of the type of household item that would have been in a more affluent home in the 1920s. It is also of interest as an example of the type of souvenir sold at the British Empire Exhibition in 1924-5. It is a useful and attractive display item.This is a silver circular-shaped wool holder which was a souvenir of the British Empire Exhibition held at Wembley in 1924-5. It has four silver segments held together at each end with silver pins. The segments have an open fretwork pattern and can retract and open to allow material to be stored and to be easily accessible to the knitter or needleworker. The Wembley emblem with the image of an Art Deco lion is welded onto one of the segments. This silver ball could also be used as a pomander to hold perfumed material and to be placed in a wardrobe or cupboard.‘Wembley’ british empire exhibition, wembley 1924-5, pomander, wool holder

Set of three 35mm Kodak white cardboard colour slide by Keith Kings of 16 or 17 /3/1968. .1 - W5 834 - on temporary track in Glenferrie Rd during relay looking, south to Kooyong railway station. .2 - photo showing the temporary track and the new 102 lb rail laid out pending welding. .3 - Photo showing W2 418 in Glenferrie Road and trackwork. Route 69" Has the Kooyong Tennis courts on the right hand side. See Keith's slide notes.Keith Kings stamp and number "20-1, 20-2 and 20-3", with details of exposure. .1 - "W5 834 - on temporary track in Glenferrie Rd during relay, south to Kooyong railway station. - 16/3/68" .2 - "Glenferrie Rd relay new 102 lb rail in approximate position in excavation. Ashes rolled as foundation. Temporary track on left. 17/3/68" .3 - temporary track at left being excavated and track drain laid. W2 418 on old track on right. 17/3/68"trams, tramways, glenferrie road, kooyong, trackwork, temporary track, w5 class, w2 class, route 69, tram 834, tram 418

Set of 8 black and white photographs of the SEC Ballarat track welding truck, Reg. No. 119 341. Truck is a British Bedford truck, model WHG, built by GMH Melbourne between 1932 and 1934. Has a fabric roof, chassis fitted with a tray top body, side tool box, metal frame and covered with canvas, fitted out with a motor generator set, welding equipment and oxy acetylene bottles. Also fitted with a spot light - 'Auto Reel Lite". - See Related Items sheet on truck notes provided by Kevin Oates, MFESB workshops, 4/2001. (Scan of this sheet of the Kodak folder added 15-8-2017 - see pdf file.) 1705.1 - side on view of truck with covers down, except for opening at back. Photographed in Wendouree Parade with two different boat sheds in the background. 1705.2 - view with drivers side cover opened, showing equipment arrangement. 1705.3 - close up view of motor generator set and controls and one of the oxy acetylene bottles. 1705.4 - view showing equipment laid out on the roadway, welding cover, seat, grinder, cables, shovels, welding mask etc. 1705.5 - close up view of motor generator control panel and associated cables. 1705.6 - view of side of truck showing all equipment. 1705.7 - vertical format photo from rear of truck showing equipment laid out and wandering lead connected to the overhead. Also shows high voltage wires on a power pole fitted with a bracket arm. 1705.8 - view of truck from the front, with SEC symbol on side, with a covers closed. Thought to be photographed at loop in Wendouree Parade on the View Point line, near Mill St. Prints when donated to the BTM were contained within a red and yellow "Kodak" folder. Folder stored with catalogue worksheet. On rear of folder in ink is number "53569" and stamped on the front is number "984" and written in front top left hand cover, "8 prints" and in top right hand corner word "Sarah". See Notes provided by Kevin Oates of the MFESB (Metro Fire Brigade Melbourne) Thornbury workshops on the truck, manufacture and engine. A survey of Wendouree Parade on 22/4/2001 did not show the boat sheds or power lines featured in the photographed. Thought to be in vicinity of Power station because of the high voltage lines on the power poles.Stamped on rear in black ink, "984" on photos 1705.3 to 1705.8.trams, tramways, welding truck, trackwork, secv, wendouree parade

These photographs were taken just after the McKillop's Bridge was completed after the flood damage. The current McKillop’s Bridge was built by the Country Roads Board in two stages between 1931-36, during which its height was raised after the original bridge superstructure was washed away in record floods of January 1934, prior to its original official opening. In its reconstructed form the original concrete abutments were turned into additional piers and the welded-steel trusses were cantilevered back over them to meet the new higher road approaches. It is sited at McKillops Crossing, named after pioneer overlanding squatter George McKillop who crossed here in 1835. This was a stock crossing place for almost a century before the bridge was constructed. (info. from Victoria Heritage Register)This is a pictorial record of the history of McKillop's Bridge, in itself of historical significance for its association with Victoria's long and important pastoral history, its technicl significance and aesthetic significance.Three black / white photographs. 3133.1 shows the approach to a washed away bridge. 3133.2 is of a bridge over a river with men clearing debris. 3133.3 is a close-up showing the wreckage of the bridge.mckillop's-bridge snowy-river flood-damage-1934

McColl Rankin & Stanistreet, North Virginia GM Co NL, Certificate of Boiler Inspection. Certificate that boiler is in good order and may be use up to a pressure of 100 lbs. per square inch. Dated: 23/11/1934. Signed: P Wagstaff, Inspector of Mines Issued by Signature: Samuel ? ?? Makers name A Roberts & Sons. Type Cornish Boiler 25' 6'' x 6' 6'' dia 1/2 plates, 5/8'' ends. Adamson welded flue. 3' 6'' dia 1/2'' plateorganization, business, gold mine, mccoll rankin & stanistreet, north virginia gm co nl, certificate of boiler inspection mines act victoria

In October 2000, Council invited three artists from the region (Deborah Halpern, Matcham Skipper, Tony Trembath) to submit designs for a sculpture / public art work for the Eltham Town Square. The commission was paid for by supermarket giant Safeway (Woolies) as part of its supermarket permit, which required them to contribute to beautification work in the Town Square.This is the first of three parts. The 'Spirit of Nillumbik' is a celebration of the artistic spirit of Eltham and surrounding communities. Each area is identified through the flora and fauna represented in the panels. The work honours the many creative artists and architects, past and present, who have built homes and shaped lives and livelihoods with their unique creative spirit. Halpern describes her work as a public expression of their individual and collective visions. Halpern acknowledges these contributions to our hand-made history and the influence they have on the character and identity of Eltham and Nillumbik. Five picture and six woven balustrades each made out of welded steel / organic wrought iron and coated with wax. Imagery (flora - plants, landscapes and fauna - animals, birds, reptiles, insects) are all based on the local environment. There is also a relevant aboriginal presence amongst each of the panels. Each panel represents the different areas that make up the Shire. 'Water' for Warrandyte, 'Kangaroos' for Christmas Hills, 'Cockatoos and 'Valley Creek Flats' for Hurstbridge, 'Wombats', 'Bluetongues' and 'Possums' for St. Andrews/Kinglake, 'Orchids' for Panton Hill, 'Cows' and 'Grapevines' for the Kangaroo Gound Hill landmark. N/Apublic art, nillumbik, fauna, flora, wrought iron, balustrade, halpern, laurence, kangaroo, eltham town square, spirit, warrandyte, christmas hills, kangaroo ground, hurstbridge, kinglake, panton hill, water, valley creek flats, cockatoos

Set of two 35mm Kodak white cardboard colour slide by Keith Kings of: .1 - W2 600 testing the diverted track at St Kilda Jtn. Sunday 10/12/1967. Looking south See Keith's notes as well. Track welding being carried out. Tram showing Special. In the background are signs for Castrol, Speedie Electrical Appliances. .2 - W5 812 and W2 521 on the temporary track following the first diversion for the construction of the new bridge works looking north. Also see Keith's notes. 812 has adverts for wax and Harold's diamonds.Keith Kings stamp and number "14-23" and "14-28"", with details of exposure. .1 - "MMTB St Kilda Jtn bypass works. W2 600 as the test tram after the St Kilda Junction by Pass, No. 1 diversion trying out the south bound temporary track 3.03pm, Sunday 10/12/67. The North bound track tried out at approx. 12.40pm: .2 - "MMTB 521 (route 64 - City) and 812 (route 64 - East Brighton and Malvern Burke Road) on temporary track at St Kilda Jtn bypass. Note sharpness of curves and very limited transitions and tangents. Looking north. 10/12/1967trams, tramways, st kilda junction, trackwork, road works, w2 class, w5 class, route 64, east brighton, tram 600, tram 521, tram 812

The Ballarat Junior Technical School was a division of the Ballarat School of Mines, and a predecessor institution of Federation University Australia.Ballarat Junior Technical School Teacher's Timetable .1) G.B. Pyke (Carpentry, Joniery, Building Construction .2) G.B. Pyke (Carpentry, Joniery, Building Construction .3) R.C. Morgan (Joining, handrailing, building construction, building Technical Maths) .4) James Bell (Toolmaking, Milling and Gear Cutting, Maths, Engine Drawing, Applied Mechanics, Metallurgy) .5) James Bell (Toolmaking, Milling and Gear Cutting, Maths, Engine Drawing, Applied Mechanics, Metallurgy, Electrical Welding) .6) R.C. Morgan (joinery, building construction, buillding Maths) .7) R.C. Morgan (joinery, building construction, buillding Maths)ballarat junior technical school, timetable, george brosnan pyke, robert charles morgan, james bell, trades, building

Book - green Rexene covers, with title - "Melbourne and Metropolitan Tramways Board - Works Codes and Instructions". Six sections, sewn into covers, dated April 1961, signed by J. J. Fisher, Civil Engineer. 118 pages plus covers. Book numbered "46". Provides an list of contents, giving provisional codes or instructions for works, instructions, about the maintenance and repair of the track welding, safe working, watchmen, care of lamps, and plant. 2nd copy added 5/5/2019 from donation of Barry Brooks ex Bob Prentice Collection. Images revised - jpgs removed and pdf added.Inside front cover has a signature and date of 9/8/61 in ink and inside rear cover "not entered" in pencil. Could be a reference to a Court document - see Reg item 94.trams, tramways, mmtb, track, maintenance

A blowtorch or blowlamp is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. The blowlamp is of ancient origin and was used as a tool by gold and silversmiths. They began literally as a "blown lamp", a wick oil lamp with a mouth-blown tube alongside the flame. This type of lamp, with spirit fuel, continued to be in use for such small tasks into the late 20th century. In 1882, a new vaporizing technique was developed by Carl Richard Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. Carl Richard Nyberg (May 28, 1858, – 1939) was the founder of Max Sievert’s Lödlampfabrik, then one of the largest industries in Sundbyberg, Sweden. After school he started working for a jeweller and later he moved to Stockholm and worked with various metalworks. 1882 and set up a workshop at Luntmakargatan in Stockholm making blowtorches. However the business didn't work well because it took too long to both manufacture and sell them. In 1886 he met Max Sievert (1849 - 1913) at a country fair and Sievert became interested in Nyberg's blowtorch and started selling it. In 1922 the company was sold to Max Sievert who continued to own it until 1964 when it was bought by Esso. The blowtorch is commonly used where a diffuse high temperature naked flame heat is required but not so hot as to cause combustion or welding: soldering, brazing, softening paint for removal, melting roof tar, or pre-heating large castings before welding such as for repairing. It is also common for use in weed control by controlled burn methods, melting snow and ice from pavements and driveways in cold climate areas, road repair crews may use a blowtorch to heat asphalt or bitumen for repairing cracks in preventive maintenance. It is also used in cooking; one common use is for the creation of the layer of hard caramelised sugar in a crème brûlée. A brass blowtorch, 'Sievert' with a wooden handleSIEVERTtools, blow torches, blow lamps, welding, brazing, jewellery, cookery, soldering, nyberg carl, sievert max, stockholm, sweden, spirit fuel, kerosene, gas fuel, moorabbin, bentleigh, cheltenham, market gardeners, pioneers, early settlers, plumbing, carpenters,

Before 1908 the words "melting pot" was a term relating to a "crucible" with a meaning of "a pot in which metals and other substances are melted (fused) to provide metal items of varying shapes and uses. From the mid 1900's this term changed and became more related to the "mixing" of social and ethnically diverse populations. The description used here is that of pre 1908. This melting pot was used in the early to late 1900's when produce and hardware shops were too far away from the Kiewa Valley and time was at the essence. The ability to manufacture as many "crucial " items at the home property was the difference between running a successful rural business or not. The isolation of the Kiewa Valley (before the 1950's), hindered the "time down" of machinery and important "widget" replacements. The ability of self sufficiency on properties is still a boon to rural properties as time lost is never really recovered.This melting pot is highly significant to the Kiewa Valley as it provides evidence that the graziers and cattle stations required to be self sufficient in all aspects of day to day maintenance and replenishment of worn materials requiring to be "manufactured " at the property and lack of replacements from commercially shelved products. This aspect of "survival" in the "bush" can be seen in the "huts" built on the Bogong High Plains to accommodate the seasonal grazing of cattle from the Kiewa Valley.This black melting pot is made of cast iron. The lid is missing. The top rim of the pot has three lips for poring accuracy. The formation of these lips are in a "triangle" formation. The top section of the body has a curve inwards reducing the pot diameter from 270mm at the base to 135mm.at the top. The handle is made from heavy gauge wire which is fastened to the body through two lugs (welded onto the top section of the pot) and fasten through a hole at the top of each lug. The handle has a "U" shape as it goes through the lug hole, ensuring no accidental fixture to any side thus allowing free swiveling from one side to the other . "BH" indented within a diamond shape. Opposite "No 3"camp fire cooking utensils, hot plate, cast iron cooking appliance, drovers kitchen

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

This item was before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength.This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) of the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron hand operated drill, has a short barrel-shaped cylinder, known as "the eye" welded across the main rod and is 30mm in circumference. It also has a hole drilled to allow a screw to be fastened onto the hand stock ( not available).The main rod is solid for 400mm and then has been flattened and coiled (Helical screw blade) for another 200mm. At the end of the larger screw blade there is a smaller gauged starter blade with a pointer thread 15mm long. This Auger produces a 1/8th inch hole (metric measurement not used at time of manufacture) See KVHS 0469 for 3/4 inch hole and KVHS 0471 for another 1/8th inch hole.A number 5 stamped on the flat sideauger, hand drill, fencing, tool, rural trades, brace & bit