Doolittle Raid occurred on the 18th April 1942 during WW 2.. The raid was the first air raid by the US Forces on Tokyo and Honshu and the Japanese Archipelago. A special unit of USAAF B25 Mitchell Bombers trained under the command of Col. James Doolittle flew from the carrier USS Hornet. B25 Mitchell Bomber had 2 Radial engines developing 1700 hp. Wingspan of 20.6 metres. Length 16.3 metres. It carried a crew of 4 to 6 personnel and had a range of 2175 kilometres and a bomb payload of 1360 Kgs.Important event of war against Japanese.57 cm x 38.5 cm. Ebonised and Gold frame. Showing B 25 Mitchell bomber taking of from USS Carrier Hornet.Inscribed " Take Off " Doolittle Raid on Tokyo 1942.

The SS ‘Edina’ is one of the most remembered vessels that plied the waters of Victoria’s Port Phillip Bay. Often referred to as the ‘Old Lady of Port Phillip’. Her active service included the North Sea trade, ‘Crimean War’, ‘American Civil War’, Victoria’s west coast run, New Zealand to Melbourne trade, Queensland coastal trade, and of course, the Port Phillip Bay runs between the years 1880 to 1938. ‘SS’ being an abbreviation for ‘Screw Steamer’ signifying that she was propelled by a steam engine rotating a single propeller, or ‘screw’ as it was know at the time.Model of a well known bay steamer operating in Port Phillip between 1880 and 1938.Model of SS Edinamodel, ss edina, screw steamers, port phillip, bay steamers

HMS Nelson was a 126-gun ship of the line of the Royal Navy. Launched on 4 July 1814 at Woolwich Dockyard she was later converted into a screw ship in 1860, and was cut down to a two-decker and fitted with an engine of 2,102 indicated horsepower. In 1865, HMVS Nelson was given to the colony of Victoria as a training ship. She was outfitted and rigged for £42,000 and sailed for Australia in October 1867. Travelling via the Cape of Good Hope, she arrived in February 1868. She was the first ship to dock in the newly constructed Alfred Graving Dock in Williamstown, Victoria.Possibly the first training ship of the Victorian Navy which had a base in Swan Island in Queenscliffe.A black and white photograph of the sailing ship HMS later HMVS Nelson docked at the Alfred Graving Dock, Williamstown, 1872"Nelson" in Alfred Graving Dock Williamstown, Victoria 1872hms nelson, hmvs nelson, alfred graving dock, williamstown

In 1889 the three central fire brigades of Bendigo were amalgamated and a new fire station was erected in View Street (the third to be built on this site). This two storied brick building designed by Wm. Beebe forms an integral past of the View Street landscape. The red brick, white plaster relief trimmings and window frames with greenish lead-light decoration, all reflect the late Victorian style of the building. The ground floor contained an engine station and call room with stalls to accomodate three horses immediately behind. Upstairs in the main building is a handsome drill hall.Series of letters between Miss Starke and Miss Mathison re classification of the building by the National Trust; Letter to the Country Fire Authority (CFA) re classification; Media Release; National Trust data survey form; two photos of the fire stationhistory, national trust bendigo collection, bendigo, bendigo fire station

Historical Details: The DAP Beaufort A9-13 was the 13th locally built Australian mark V Beaufort Bomber, with the first 20 being assembled from imported UK parts, but fitted with Australian built Pratt and Whitney 1830 Twin Row Wasp engines. A9-13 was originally built to an. Description: The DAP (Bristol) Beaufort Bomber A9-13, the 13th example built in Australia, was acquired in 2011 with Government funding assistance under the Australian National Cultural Heritage Account. The Beaufort Bomber was the first product of the Department o. Level of Importance: Nationalbeaufort

Book produced by the Science Museum provides a brief history of the cable tram system, with photos. Includes details of the engine houses, the cable, the grip mechanism, the ticket bell punch, and why "Mind the Curve". Has a list of acknowledgments. Published shortly after or at the time of the launch of the tram in the enclosure in Russell St. The additional sheet with the book provides details for each route of route, the location of the city terminus, suburban terminus, running time, night light, route length, first and last car for each day of the week. Not known who compiled the sheet.Demonstrates the work of the Science Museum - now Scienceworks.Book - 16 pages + card cover +postcard of cable tram set No. 1 at the Science Museum 1975. Inside the book is a ruled sheet of paper with details of the cable tram routes, handmade with ink.tramways, cable trams, science museum, melbourne

Multi-fold brochure advertising public auction of 37 lots on Saturday 7th November, 1914. Brochure includes terms of sale, description of subdivision features and local facilities, and photographic images of the area. Subdivison includes Smedley Road, Oban Road, Berringa Road, and Williams Road, North Ringwood. Auctioneers: Coghill & Haughton, 79 Swanston Street, Melbourne, in conjunction with J.G. McAlpin, Ringwood. Brochure includes Clearing Sale to be held same day for "everything required to work these orchards, from a packing needle to a traction engine ... comprising the most up-to-date and extensive farm & chaffcutting plant in this great district".

Miniature model of a WW2 era Avro Anson twin engine aircraft mounted on an ashtray. The aircraft is supported by a curved arm attached to the circular ashtray base. The base has a small metal RAAF 'winged eagle' insignia attached to the front edge. The items have been made from chromed metal materials. The RAAF was equipped with Avro Anson aircraft in the late 1930 period prior to WW2. These aircraft were used by the RAAF for general and maritime reconnaissance and training throughout WW2 and into the early 1950s. The first version of the Avro Anson was developed in 1935 by the British Avro aircraft company.Chromed metal RAAF 'winged eagle' insignia on the front edge of the base.plane, trench art, ashtray, aircraft, souvenir, avro anson

Black and white Photo of Pall Mall Bendigo - early days - late 1800's - postcard -rear of card shows Royal Historical Society of Victoria Bendigo Branch - Hustlers Royal Reserve No.2 Locality; Pall Mall Bendigo RSL Memorial Hall now occupies site. Depth of shaft -1,660 feet, Formed 1885, closed 1917, Poppet legs - steel, 60 feet high. Winding engine: First motion, 24 in. Cylinders, 10ft. Drums. Gold Yield - 10,262 ozs .Dividends 3,200 pounds. / Photo shows Beehive sign.postcard, photograph, bendigo, pall mall bendigo - early days - late 1800's /--hustlers royal reserve no.2 locaility ; pall mall bendigo rsl memorial hall / beehive sign

Ten coloured photographs taken in 1988 by Carolyn Goldberg (.01)&(.02) Photos of the Port Melbourne Yacht Club (pre fire). One is taken at distance. (.03)&(.04) Photos of Princes Pier locked up and abrred to public access (.05)&(.06) Photos of cranes on Station Pier. One taken at greater distance from Princes Pier (.07) The engine works building on future Beacon Cove site (.08)&(.09)Two views of the Centenary Bridge. One at greater distance. (.10)Photo of the area now known as Beacon Cove with City in distant backgroundpiers and wharves - station pier, piers and wharves - princes pier, societies clubs unions and other organisations, sport - yachting, built environment - civic, built environment - domestic, centenary bridge, carolyn goldberg, commonwealth engine works, port melbourne yacht club, pmyc, cranes (stodart?), liardet's beach, beacon cove

Three catalogues, two with grey covers and one missing its cover. Auction Catalogue of Mining and General Machinery held on Thursday 27th April, 1944 at Benambra, near Omeo, Vic. The buildings, tools, stores, plant, motor vehicles & extensive equipment of the Mount Murphy Wolfram Mine were sold by Order of Commonwealth of Aust. Department of Supply and Shipping. J. H. Curnow & Son were the Auctioneers. Contains descriptions of larger machinery, buildings and engines. Sale also conducted by permission of the Director of Machine Tools and Gauges under Regulation 59 of the National Security (General) Regulations.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - mount murphy wolfram mine, commonwealth of aust dept of supply and shipping, j h curnow & son, c j curnow, h j lowe, f c dyett, j l jamieson & co, w g wedd, the prahran telegraph printing co

Report - 114 pages, photocopied from an original, black comb bound with front clear plastic cover and rear mania cover titled "Melbourne Cable Tramways - General Report on their Construction Operation and Maintenance", prepared by I. Macmeikan - Assistant Superintendent Cable workshops 1920 - 1930 and Manager Preston Workshops 1951 - 1956. Has details of the construction of the system, car depots, car workings and maintenance, power houses or winding houses or engine houses, route colours, parts for the trams, grip mechanisms and its operations including the actual calculations for their operation. Published by the MMTB.trams, tramways, cable trams, mmtb, grip tram, winding houses, operations

Research report - Manuscript - 22 pages titled "Cable Trams in Melbourne - a Major Nineteenth Century Engineering Achievement", written by Miles Pierce of Engineers Australia Heritage. Gives the overseas background of cable trams, the personnel, the company, (Melbourne Tramway and Omnibus Company, construction, Engine Houses, maps, the cable, the grip, the Trams themselves, Northcote Line, Operation and demise, remaining cable tram heritage. Has acknowledgements and references. Includes photographs and diagrams. Received by e-mail 9/7/2017. The Museum assisted with the report. Was scheduled to be presented at the Engineering Conference in Mildura Oct. 2017.trams, tramways, cable trams, mto co, construction, grip tram, engine houses, northcote cable tram

Single sheet, folded into half, typed, with pencil notation on the front "Hamilton's cable figures" providing a "Synopsis of Cost of the Melbourne Tramway System", prepared for The Melbourne Tramways Trust by its Secretary and Engineer T. Hamilton, dated December 1896. Provides length of each line, cost of track, cost of altering services, engine houses, engineer, general expenses and cost per mile. Also includes horse tramways, staff, offices, borrowings. Items 2064 to 2075 within box 72.3 in a brown folder marked "MT&O Co." red pencil on the front cover.trams, tramways, mto co, cable trams, drawings, reports, surveys, horse trams, mtt

A modern detailed replica to scale 1:200 of the early 20th C battleship launched in 1906. " The dreadnought class defined the basic form of battleships up to the 2nd WW. Original specifications: Length 526 ft; beam 82 ft; speed: 21 knots cruising Crew complement: 657; Armament: 10 12inch guns; 18 12 pdr guns( 4 shown on model) ; Engines: two turbines driving 4 shafts; weight: 17,900 tons fully laden; coal capacity 2977 tons; The ship was broken up for scrap in 1920 - David Lumsden donor and modelmaker Detailed Model of the Dreadnought 90% cardboard model of early 20th C. battleship one white ensign; on a polished wood plinth with cardboard hand lettered labels. Decks painted pale gunship grey and below waterline bright red. Model on polished wood plinth with bevelled edge.two card labels adhered to plinth: "David Lumsden 2014 Scale 1:72" "H M S Dreadnought"model ships, h.m.s. dreadnought, battleships, ww1, david lumsden

Thomas Broadbent $ sons Ltd was established in 1864 in Huddersfield England. They are an engineering firm , specialists in heavy duty engineering products. By 1893 Broadbent had progressed to steam powered engines for the textile industry. Some of these machines operated for upwards of 50 years Today Broadbent is a leading world designer in the manufacture and maintenance of advanced centrifuges. This document is a manual for a suspended direct steam driven hydro extractor. It shows the various parts , maintenance instructions and erection and working instructions. While it is stamped as Albion Woollen mills which were situated at Geelong, it is likely to have connections to the Warrnambool Woollen Mills.This document is a good example of machinery manual. It is possibly linked to the Warrnambool Woollen Mill. The fact that the company which manufactured these items is still in existence today after 150 years is testament to the quality of the items produced.Cream coloured document with mainly black text with some red text for headings contained in the document. It is printed front and back and is folded in three sections.Stamp at top "Albion Woollen mills Pty Ltd" .4H x 4 in red pencil in top RHC. Printed on front page. Thomas Broadbent & Sons Ltd Central Iron Works Huddersfield. warrnambool, warrnambool woollen mill, broadbent direct steam driven hydo extractors,, broadbent centrifuge

This photograph shows the workers' amenities at the Gold Battery. The building has a bedroom and kitchen. In front is a Baler Bucket and a cage. This particular cage was for raising and lowering the skips which brought the material to the surface. This is one of a series of photographs of the Rutherglen Gold Battery. The battery's purpose was to crush quartz from nearby quartz reefs and extract gold from within. The battery was erected in 1908 and consists of a five-head battery, Wilfrey table, Bergin pan, portable steam engine and shed. The battery was restored in 2011/12 and can be viewed daily between 9.00am and 5.00pm. See website for details.Colour photograph of a corrugated iron cottage, with several pieces of machinery around it.gold battery, gold processing

This photograph is of the back end of the side of the main building of the Gold Battery with workshop at rear (now demolished). Beside building is a hand windlass, along with some old pulleys and various parts. This is one of a series of photographs of the Rutherglen Gold Battery. The battery's purpose was to crush quartz from nearby quartz reefs and extract gold from within. The battery was erected in 1908 and consists of a five-head battery, Wilfrey table, Bergin pan, portable steam engine and shed. The battery was restored in 2011/12 and can be viewed daily between 9.00am and 5.00pm. See website for details.Colour photograph of the side of a corrugated iron building with a smaller building at the left, and a number of pieces of machinery next to the buildinggold battery, gold processing

Drivers were highly skilled enginemen. Taking a train from Beech Forest to down to Gellibrand required the train to be controlled at 10 mph (16 km) without running out of air. When a brake application was made the brakes on the locomotive were applied harder than the train brakes. The brakes locked up and the engine would just slide along. Drivers used a retention valve on the loco, then released the loco brakes so as not to wear out the brake shoes. So the train pulled into Gellibrand ready to pull out again after refilling the loco with water.At Gellibrand, a Down goods train is about to depart the station on 14 December 1955. The train consists of the locomotive G42, a louvre van NO, two NQ wagons and a guard's or brake van NC. B/W.gellibrand; colac; beech forest; railway;

Historical Details: Brief overview of the airframe: • Built at the Boeing 737 Production line at Renton Washington, United States of America • 09/12/82 First flown from Renton Municipal Airport • 1988 saw a change of registration to N270AU • 27/2/1997 US Air became US Ai. Description: The Boeing 737 is a short- to medium-range twinjet narrow-body airliner. Originally developed as a shorter, lower-cost twin-engined airliner derived from Boeing's 707 and 727, the 737 has developed into a family of ten passenger models with a capacity of. Level of Importance: Regionalb737

The first nutcracker tow at Falls Creek was the Nissen Tow operated by Toni and Skippy St. Elmo. It had a capacity of five people at one time and cost 6/- day in 1951. The tow was powered by a Buick engine and operated from 1951 until 1960. Other nutcracker tows at Falls Creek were the Village (left side), Village (right side) and the Dog Patch Tow, By the 1960s nutcracker tows were rapidly being replaced in the developing major resorts although a few rope tows remained in use largely to assist access over areas of fairly flat terrain.This item is significant because it came from the original Rope Tow, Nissen, at Falls Creek, VictoriaThe nutcracker (metal clamp) has two handles that clamp onto the rope when closed together. The clamping part of the nutcracker is at the end near the hinge. The nutcracker is attached to a belt via a short rope, and a small metal loop is attached to the belt, onto which the nutcracker can be stored whilst skiing. When riding the nutcracker, the rope attachment is worn to the front which can then be pushed around to the side whilst skiing. The belt needs to be worn tightly around the hips.falls creek tows, nissen tow, toni and skippy st. elmo

"The State Battery was the central component in the gold mining of this area from the 1920s. The battery crushed the gold bearing quartz extracted from the mines and was a sizeable weatherboard building enclosing the engine and stampers. All that now remains are the bases for the machinery that comprised the battery, one timber and a couple of concrete bases and the nearby dam, which supplied water. However the historic significance of the site remains and is enhanced by the Queenstown Cemetery on the other side of Smiths Gully Road". - Bick Study 1922 This site is now the Peter Franke Reserve and is managed by Parks Victoria Photo Source: The Leader, Nov. 2nd, 1929This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as the 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, queenstown, st andrews, gold mining, smiths gully

Col. Harley Tarrant was an astute businessman and a part-time soldier. He was born at Clunes in 1860 and as a young man worked with an engineering firm in Sydney. He later joined the Board of Works in Melbourne. and later entered the early car manufacturing and retailing trade. In 1905 Harley Tarrant built the first car to be built and sold in Australia. For a time he was a surveyor and worked in Surrey Hills but motoring became his prime interest. In the early 1890s he set up a workshop in what was then Post Office Place, Melbourne. He built stationary engines which ran on kerosene and in the first years of the twentieth century, with partner W Howard Lewis, built the first petrol driven car in Australia. This photo is of his sixth car and was taken after the finish of the 1st Sydney to Melbourne Dunlop Reliability Trial, which Tarrant won. Harley Tarrant produced cars between 1901 and 1907 at the Tarrant Motor and Engineering Company in Queen's Bridge Street, South Melbourne. The first car had a rear-mounted two-horse power Benz engine. Two-cylinder models were later produced followed by 4-cylinder models. The only Tarrant car in existence in 1984 was owned by Harley Tarrant's grandsons, Kenneth and Peter Holmes of Melbourne. The 1906 Tarrant car featured on an Australia Post stamp in 1984. It was one of a series of 5 stamps featuring Australian veteran and vintage cars.Black and white photo of a car without a hood in the driver's seat of which is a man with cap, driving dust coat and goggles, identified as Harley Tarrant. Beside him is a young girl in a large frilly; she is identified as Doreen Tarrant, his daughter. Another man with cap and goggles is talking to him and a gentleman in a bowler hat looks on. There is a women and 2 children in the background in front of a large brick wall decorated in two coloured bricks. cars, inventions, dunlop reliability trial, tarrant motor and engineering company, mr harley tarrant, miss doreen tarrant, mrs doreen holmes, col harley tarrant

Black and white photograph of fibro building with sign above entrance reading, "Metropolitan Fire Brigade".Typed below photograph, "The old Ringwood Fire Station 1930. Was behind old Town Hall in Maroondah Highway. Later used as infant welfare centre. Civic Place on right with old schoolmasters house in background. Looking along Civic Place towards Ringwood St. Note old telephone wires and insulators." Written on backing sheet, "Engine 1912 Hotchkins. C of E Ministers house on right in Ringwood Street".

Alfred Donald Senior studied Electrical Engineering at the Ballarat Schoo of Mines (SMB) between 1927-33. He worked as an Instructor in Electric Welding at SMB between 1932 and 1967 receiving a certificate of Electrical Engineering, and greatly enjoyed his association with SMB as a student and instructor. Senior was an A. Grade Electrical Mechanic (A.M.I.E.I.s Vic and NSW) and was employed at the SEC Elec. Supply Co of Vic 1927-1970. He became Chief Electrical Inspector for the Mid-Western region.Hand embroidered pocket, framed in timber behind glass. The blazer pocket belonged to A.D. Senior who studied Electical Engineering at the Ballarat School of Mines from 1927 to 1933. from 1927 to 1933.On back of frame: "Mr A.D. Senior. Electrical Engineering student 1927-33. Instructor in Electric Welding 1932 - 67. C.E.E. SMB. A. Grade Elec. Mecahnic. A.M.I.E.I.s Vic and NSW. A very pleasant association during these periods. SEC Elec. Supply Co of Vic 1927-1970. C/o D.C. to A.C. and replaced many engines with elec. motors. Chief Electrical Inspector Mid-Western region.embroidery, ballarat school of mines, a d senior, coat of arms

These photographs are from the Snowy River Mail newspaper, September 9, 1987. Ron Hayward's family ran a shop in Rupert Street, Orbost.This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost. The closure of the line was a significant event in Orbost's history.Five black / white photographs related to closure of the Orbost - Bairnsdale Railway Line.3104.1 - on back - "A view from Grandview, Newmerella, of the last train to leave Orbost on Friday August 21, 1987. As the afternoon sun lengthens the shadows on the Snowy River flats, the sun also sets on an era in Far East Gippsland transport as the last train crosses the viaduct." 3104,2 - 0n back - "Ron Hayward passes over the staff during the last crew changeover for the last train to run on the Orbost line. Ron Haywood (L) who 39 years and 6 months ago drove the first diesel loco to Orbost (T366T) presents the last staff to the driver, Bill Buckley, who took the last diesel out." 3104.3 - on back -" as above - 2nd paragraph only 3104.4 - on back - " Ron Hayward who took the first diesel engine from Bairnsdale to Orbost on February 21. 1957 when he was stationed at Orbosst. Last Friday he rode on the last diesel to Orbost after obtaining a special pass from V Line , he also handed over the staff for the last change at Orbost. The last driver was Bill Buckley." 3104.5 - on back - "LAST TRAIN ROLLS INTO ORBOST B/A Friday August 28 1987 For Ron Hayward the last train journey on the Orbost rail line was a sad occasion. Mr Hayward took the first diesel engine from Bairnsdale to Orbost on February 21, 1957, whe he was stationed at Orbost. Last Friday he rode on the last diesel too Orbost after obtaining a special pass from V-Line. He also handed over the staff for the last change at Orbost. The last driver was Bill Buckley. Mr Hayward was an engine driver with nhe railways and transferred to Orbost when steam engines used the line. He left the railways in in 1957 but took up a job with them again in 1968. He said also it was a privilege to have been able to ride on the last train, the occasion was a sad one,"east-gippsland-railway railway-closure hayward-ron buckley-bill orbost-bairnsdale-railway

This photograph shows the pre-heater on the left and the furnace on the right. After clean up of stamper table, amalgam is placed in a retort, then placed in the furnace where mercury is condensed and runs down the small pipe into an enamel bucket and can be reused. This is one of a series of photographs of the Rutherglen Gold Battery. The battery's purpose was to crush quartz from nearby quartz reefs and extract gold from within. The battery was erected in 1908 and consists of a five-head battery, Wilfrey table, Bergin pan, portable steam engine and shed. The battery was restored in 2011/12 and can be viewed daily between 9.00am and 5.00pm. See website for details.Colour photograph of the interior of a room with corrugated iron walls, with a fireplace on the left and a furnace on the right.gold battery, gold processing