The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Small round lantern replacement glass called "Feuerhand" Superbaby Model. Design No 58162.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lamp glass replacement, glass, hurricane lamp, feuerhand lantern, jena glass works

The Feuerhand lantern works were established in Beierfeld in the Saxon Ore Mountains. Called Erzgebirge in German or Krušné hory in Czech, is a mountain range in the south of Saxony in Germany known for its craftwork. Lantern production began in the area by Hermann Nier who ran a plumber's workshop around the 1870s and made lanterns, amongst other things. In the town of Beierfeld, also well-known for its metalworking were the brothers Hermann and Ernst Nier who founded a modern production centre for hurricane lanterns manufacture in 1893. Five years after the foundation, the company Frankonia (Albert Frank metalware) bought up the production site and the brothers Nier became production managers. Owing to differences with Frankonia, Hermann Nier finally started its hurricane lantern factory "Hermann Nier Feuerhandwerk" in 1902. In the same year, he applied for a patent for the manufacturing of lanterns using the stamping and folding techniques with tinning by hot-dipping and without hand-soldering. In 1914 the trademark "Feuerhand" was registered for all products as a utility model of the German Reich in German: "Deutsches Reichs-Gebrauchsmuster" (DRGM) and in 1920 the round Feuerhand emblem was added to the brand. Finally, in 1926 the patents, as well as the trademark "Firehand", were also registered in the USA. The manufacture of the well-known small hurricane lanterns the “Baby Series” complete with fireproof borosilicate glass from the Firma Schott firm from Jena started in 1933. Between 1918 and 1938 Nier Feuerhand became the biggest producer of hurricane lanterns in the world. Production continued until 1990.A significant item that demonstrates from its fabrication a manufacturing process that was far in advance of its time and that influenced the production of lanterns from many other manufactures around the world. These types of lanterns made by Feuerhand around the early 20th century are now sought after by collectors.Small round lantern replacement glass called "Feuerhand" Superbaby Model. Design No 58162.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, hurricane lamp glass replacement, glass, hurricane lamp, feuerhand lantern, jena glass works

Ken Pocock won the 1976 Bendigo Cup. with Chapel Elect A broken leg suffered by Golden Square footballer Ken Pocock, while training with VFL team Collingwood, saw the end of a promising football career, but the start of a highly successful career in harness racing. Ken first worked in Bendigo as a horse and cart delivery driver for Symons dairy and Jeffreys bakery. He learned his craft by working with harness horses for veteran trainers Alf Petherick (Glideaway) and Clarrie Long (Great Dalla). Early in his career Ken had Kaye Lois, and the 1965 Moomba Cup and prolific winner Fosmar. He trained and drove standouts including: Peparkee, Chief Invader (1972 Shepparton Gold Cup) Chapel Elect (Melbourne Pacing Cup, Bendigo Cup), Go Van (Ouyen and 3KZ Cups), Game Oro (two Shepparton and two Kilmore Cups). The champion pacer Royal Gaze won 49 races, 17 seconds, 11 thirds including the Shepparton, Ballarat, Ouyen and A G Hunter Cups. Royal Gaze raced in 3 successive Inter Dominion series, winning 5 heats, and finishing third in Perth in 1974. Ken was also a highly skilled stud-master. He was involved in the planning and building of the ambitious harness racing property B J Lodge at Goornong, and travelled to the USA in the early 1970s with B J Lodge owner Bernie Ahern where they selected and bought champion US pacers Kentucky and Hilarious Way and stood them at stud. Ken Pocock won the 1976 Bendigo Cup driving Chapel ElectBlue with yellow arm bandsbendigo harness racing club, bhrc, bendigo, bendigo cup, race colours, chapel elect, royal gaze, fosmar, trotting, pacing, k pocock, ke pocock, ken pocock

Series of newspaper clippings about travelling on Melbourne trams, people, conductors, and what can happen. .1 - Newspaper clipping titled "Swanston Express", from The Age 18/5/1985 by Alan Fitzgerald, about travelling on a tram and being on the wrong tram to an unusual destination and the things that can happen. Based around the story that a person was supposed to fly to Oakland USA but finished up in Auckland NZ. .2 - ditto titled "Its not easy losing green", from The Herald, 12/12/81 written by Lawrence Money about the loss of the green W's and their quirks - like sand on the floor, ticket butts, trap doors, peep holes, Melbourne habitats, compared to the orange trams. .3 - Letter to the Editor "Keep our trams and buses green", written by R Francis head of the graphic design, Swinburne Institute of Technology - regarding the colour of our vehicles, heritage and the craze of having orange colours - industrial design. Dated 8/5/1982. .4 - Editorial, 17/1/1995 - titled "Other peoples' trams" - The Age, about the reliance on Melbourne trams by its people, comparison with other large cities e.g. St Petersburg, cost of running it, finishes with the view that the system should be extended.trams, tramways, melbourne, behaviour, tramways, crews, tramcars, people and places, sanding equipment, compressors, livery, colour schemes

Yields information about the view of The Courier, and locals about the mooted closure of the tramway system and reporting on the proposal in particular local views.Foolscap sheet of plain paper, with rounded corners, with 8 newspaper cuttings, concerning the mooted closure of the Ballarat Tram system March - March 1962. All from The Courier, unless noted otherwise. Most of the cuttings glued onto the sheet. 1 - 17/3/1962 - "Discussion on trams" - report and photo on the Save the Trams Committee - photo of J Restawick (Trades Hall), Cr. J E Tuppen (Sebastopol), S Miller (Pensioners Association), Cr Tom Evans, Vance Dickie, Cr W. E Roff (Ballarat), Robert Joshua, Murray Byrne, Gordon Scott. Refers to the front page story. 2 - "Unanimity in City (19-3-62), report on meeting and that the City would fight to retain the tramways 3 - "Need for Trams (20-3-62) - Senior Citizens wanted the tramway Mrs N Kierath reported 4 - "Mothers Join Tram Protest (20-3-62), Urquhart St School Mothers re tram 5 - "Trams and Buses" - W J Parsons, use of trolley buses, USA tram lines and extensions and H J Bromley - rather idiosyncratic letter. 6 - "DLP Back Councils" - local DLP support report. 7 - "Save the Trams" - trams help to support aged citizens. 8 - "Tram Deputation" - Bolte asked to receive a deputation from Ballarat and Bendigo Councils.closure, letter to the editor, editorial, sec, councils, city of ballaarat

Research Report or Overseas Tour report, Half bound in green and black Rexene with mottled end papers, 222 pages (Gestetner printed single sided), typed report - titled "Report of H.H. Bell Chairman of the Melbourne and Metropolitan Tramways Board on his overseas trip March - October 1938". Dated 31/1/1939. He was accompanied by Mr. R. A. Spencer the Board Secretary. Reg Item 3875 indicates that their wives travelled as well with them. Has an index, notes on his visits to five cities on his voyage to England, visits to 10 UK cities, Berlin, Paris and 12 USA and Canadian cities. Includes notes on buses, gas-producer engines, PCC trams, closure of tramways, technical notes, trolley buses, conversion of Bourke St cable tram routes, overhead, motors, engines and many other topics. Note pages scanned in particular have reference to Bourke St conversion and driving habits in the UK compared to Melbourne (road hogs). Inside front cover has a label from "Sands & McDougall Pty Ltd" about the job number and date of binding "6-3-1939" See Reg Item 3846 for a copy of the report re conversion of the cable tram routes and 3906 for an Oct. 1938 report on the PCC car to the Board.trams, tramways, mmtb, bourke st, conversion, double deck buses, tours, overseas tours, pcc, buses, trolley buses, uk, usa, canada

This post drill press has been made by Melbourne business, Dawn Manufacturing Company. It can be operated manually or by a pulley driven flywheel, with the aid of an engine connected to a power supply. In the late 1800s early 1900s a drill press like this would have been driven by steam from a boiler, the main power source for manufacturer’s power at that time. Dawn’s Golden Anniversary 1917-1967 Catalogue describes this model 611 drill as … “Ruggedly constructed with accurately reamed bearings. The coupling between the main spindle and feed screw engages the full circumference of the spindle, and embraces a ball-bearing thrust race. The pillar, as in all “Dawn Drilling Machines” is a solid bright steel bar, in place of the usual light tubing. Adjustable automatic feed.” And “F. & l. Pulleys extra, if required”. DAWN MANUFACTURING CO. The Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. - 1959 the company was taken over by G.N. Raymond Group. - 1967 the Dawn Manufacturing Co. had distributors in Australia and overseas, including USA, Canada, New Zealand, Asia and the Middle East. - 1973 the Siddons Ramset Limited acquired Dawn. - December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. - November 1998 Dawn became 100 per cent Australian owned. The drill is a typical tool of a blacksmith, cart wright, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-20th century.Post type drill press machine with gear driven flywheel. Drill press is attached to a post and is fitted with a pulley belt and will run at a speed of maxim 200 r.p.m. The machine can also be manually operated. It has an aperture in the centre, a chuck, for the drill bit and has two metal handles at the centre, on the right hand side. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. Made by Dawn of Melbourne, Australia. Model No. 611, Code No. 9157"DAWN MFG COY”, “MELB. AUSTRALIA", " 611"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, blacksmiths, blacksmith’s drill, blacksmith tools, dawn drill model no. 611, dawn drill code no. 9157, dawn manufacturing coy melbourne, dawn manufacturing coy coburg, dawn post drill, drilling machine, drill with gear driven flywheel, forging tool, metal working tool, post drill, steam powered drill, trade tool, warrnambool district 1900s

W.D & H.O.Wills (Australia) Ltd began manufacturing tobacco products in 1913 at its Raleigh Park factory in Kensington, Sydney. In 1945 an estate of 16 acres was purchased at East Bentleigh, Melbourne, with a further 22 acres purchased later and the Virginia Park manufacturing branch was established. The 1950s were to be one of the most successful decades in the company’s history and it enjoyed a peak of 83 per cent market share in 1954. But this was also a period of increased competition as Phillip Morris and Rothmans entered the Australian tobacco market. By 1972, increased competition meant that the company’s market share had slipped to 39%. By the time tobacco advertising was banned on Australian radio and television in 1976, Wills' market share had fallen a further 6%. In 1985 Wills combined the separate factory operations in Sydney and in Melbourne into one site at Pagewood, Sydney which took on the name Virginia Park. In 1989 W.D & H.O.Wills (Australia) became a subsidiary of the British American Tobacco Industries group of companies. 1999 British American Tobacco merged with global competitor Rothmans International. Rothmans in Australia and Wills merged to form the wholly-owned subsidiary British American Tobacco Australia. The merger left British American Tobacco Australia, Phillip Morris and Imperial Tobacco Australia Virginia Tobacco, or Flue-cured tobacco, is named after the US state where it was first cultivated. It is also called ‘bright tobacco’ because of the yellow to orange colour it achieves during curing. It grows particularly well in subtropical regions with light rainfall, such as Georgia, Florida and the Carolinas in the USA, Southern Brazil and Zimbabwe. In Australia, blends are predominantly Virginia, for example, Dunhill and Winfield. Virginia blends contain only flue-cured Virginia tobacco W.D & H.O. Wills Pty Ltd - In 1945 an estate of 16 acres was purchased at East Boundary Road, East Bentleigh, Melbourne, with a further 22 acres purchased later and the Virginia Park manufacturing branch was established. The plant was closed 1985 when the firm moved to Pagewood, Sydney New South WalesA circular tin with a lid that is opened by twisting a coin in the rim and closed by screwing the lid down. Instructions written on base of tin. Contained ‘Log Cabin’ tobacco.lid :LOG CABIN / FLAKED GOLD LEAF / TOBACCO / base ; LOG CABIN / SKRU SEAL / To open twist coin / to reseal screw lid / TOBACCOtobacco, cigarettes, smoking pipes, cigarette papers, moorabbin, cheltenham, bentleigh, log cabin tobacco, w d & h o wills pty ltd , british american tobacco ltd, rothmans international ltd, east bentleigh

W.D & H.O.Wills (Australia) Ltd began manufacturing tobacco products in 1913 at its Raleigh Park factory in Kensington, Sydney. In 1945 an estate of 16 acres was purchased at East Bentleigh, Melbourne, with a further 22 acres purchased later and the Virginia Park manufacturing branch was established. The 1950s were to be one of the most successful decades in the company’s history and it enjoyed a peak of 83 per cent market share in 1954. But this was also a period of increased competition as Phillip Morris and Rothmans entered the Australian tobacco market. By 1972, increased competition meant that the company’s market share had slipped to 39%. By the time tobacco advertising was banned on Australian radio and television in 1976, Wills' market share had fallen a further 6%. In 1985 Wills combined the separate factory operations in Sydney and in Melbourne into one site at Pagewood, Sydney which took on the name Virginia Park. In 1989 W.D & H.O.Wills (Australia) became a subsidiary of the British American Tobacco Industries group of companies. 1999 British American Tobacco merged with global competitor Rothmans International. Rothmans in Australia and Wills merged to form the wholly-owned subsidiary British American Tobacco Australia. The merger left British American Tobacco Australia, Phillip Morris and Imperial Tobacco Australia. Virginia Tobacco, or Flue-cured tobacco, is named after the US state where it was first cultivated. It is also called ‘bright tobacco’ because of the yellow to orange colour it achieves during curing. It grows particularly well in subtropical regions with light rainfall, such as Georgia, Florida and the Carolinas in the USA, Southern Brazil and Zimbabwe. In Australia, blends are predominantly Virginia, for example, Dunhill and Winfield. Virginia blends contain only flue-cured Virginia tobacco The W.D.&H.O.Wills Ltd manufacturing plant was situated in Boundary Road East Bentleigh 1945 – 85. Virginia Park is still a Commercial Business Area A tin with a hinged lid for 'Capstan' "Navy Cut tobacco Lid: CAPSTAN / NAVY CUT / W.D. & H.O. WILLS LTD inside lid - This tin of which only a / limited number will be / issued will be found convenient / for smokers as a vest / pocket container and can / easily be refilled with the / contents of the ordinary 1oz / packets of 'Capstan Tobacco'tobacco, cigarettes, cheltenham, moorabbin, early settlers, smoking pipes, cigarette papers, bentleigh, navy cut tobacco, w d & h o wills pty ltd , british american tobacco ltd, rothmans international ltd, east bentleigh, capstan tobacco

In the 18th century, spring scales appeared. To produce these scales, a manufacturer would use the resistance of a spring to calculate weights, which could be read automatically on the scale’s face. The ease of use of spring scales over balance scales is what led most post offices to outfit their clerks with spring postal scales. One of the most common types of spring scales was the kitchen scale—also known as a family or dial scale. Designed for horizontal surfaces, these scales used the weight of goods in a pan at the top of the scale to force the spring down. Such scales were common in early-20th-century households and were sold by Sears and Montgomery Ward. Many had flat weighing surfaces but some were topped by shallow pans. Companies such as Salters, Chatillon, and Fairbanks made both. SALTER HOUSEWARES began in the late 1760 in the village of Bilston, England. At this time Richard Salter, a spring maker, began making 'pocket steelyards', a scale similar to the fisherman's scale of today. By 1825 his nephew George had taken over the company, which became known as George Salter & Co. and later established a large, well equipped manufacturing site in the town of West Bromwich. The business thrived throughout the 1900s, and in 1972 the company was purchased by Staveley Industries Plc. In 2002, the management team at Salter Housewares Ltd, backed by Barclays Private Equity, bought the company out from the group, to concentrate on its consumer businesses. In 2004 was sold to the US-based HoMedics company, and in 2006, Salter Housewares USA and Taylor Precision Products Inc (also owned by HoMedics) merged.Salter Brand No. 46 Household Spring Balance Kitchen Scales made of green painted metal with a white large clock face dial marked in 1oz graduations and with a shallow metal bowl placed on the flat top connected to the mechanism. An adjustable screw tightened or loosened the spring to bring the pointer to zero, prior to adding the material to be weighed.. A common piece of kitchen equipment as most families used this type of scale when measuring goods for cooking or storing. HOUSEHOLD SCALE / NO. 46 / SALTER / TO WEIGH 28 LB / ( rope & arrow TM) BRITISH MADE Base rope & anchor S (trade mark) weights, measures, shops, scales. balances, grocery stores, early settlers, moorabbin, bentleigh, cheltenham, salter housewares pty ltd, west bromwich, england, salter george, salter richard, bilston england

In the 18th century, spring scales appeared. To produce these scales, a manufacturer would use the resistance of a spring to calculate weights, which could be read automatically on the scale’s face. The ease of use of spring scales over balance scales is what led most post offices to outfit their clerks with spring postal scales. One of the most common types of spring scales was the kitchen scale—also known as a family or dial scale. Designed for horizontal surfaces, these scales used the weight of goods in a pan at the top of the scale to force the spring down. Such scales were common in early-20th-century households and were sold by Sears and Montgomery Ward. Many had flat weighing surfaces but some were topped by shallow pans. Companies such as Salters, Chatillon, and Fairbanks made both. SALTER HOUSEWARES began in the late 1760 in the village of Bilston, England. At this time Richard Salter, a spring maker, began making 'pocket steelyards', a scale similar to the fisherman's scale of today. By 1825 his nephew George had taken over the company, which became known as George Salter & Co. and later established a large, well equipped manufacturing site in the town of West Bromwich. The business thrived throughout the 1900s, and in 1972 the company was purchased by Staveley Industries Plc. In 2002, the management team at Salter Housewares Ltd, backed by Barclays Private Equity, bought the company out from the group, to concentrate on its consumer businesses. In 2004 was sold to the US-based HoMedics company, and in 2006, Salter Housewares USA and Taylor Precision Products Inc (also owned by HoMedics) merged. Salter Brand No. 44 Household Spring Balance Kitchen Scales made of green painted metal with a large clock face dial marked in 1oz graduations and with a shallow metal bowl placed on the flat top connected to the mechanism. An adjustable screw tightened or loosened the spring to bring the pointer to zero, prior to adding the material to be weighed.. A common piece of kitchen equipment as most families used this type of scale when measuring goods for cooking or storing.On Clock face ; NO. 44 / HOUSEHOLD SCALE / TO WEIGH 14LB X 1OZ / Pro. Pat. No. 30819 / 32 / MADE IN ENGLAND / SALTER / S in trademark rope with arrow market gardeners, early settlers, fruit, vegetables, farmers, cooking, recipes, scales, weights, measures, brass, balance beam, moorabbin, cheltenham, bentleigh, kitchen scales, dairy products, cereals, wheat flour, salter housewares pty ltd, west bromwich england

Arthur Street, Eltham next to ANZ Bank The Hiroshima Day Banner was made by Jacky Talbot as part of the project. The women wanted to do something for Hiroshima Day and suggested that a workshop be set aside to make a banner. The artist was concerned about the remaining time scheduled for the project and spent several days "whipping" up the banner herself. For the artist this banner was to prove quite significant. The women hung it at the Community Notice Board on Hiroshima Day and were photographed by the local newspaper publicising the group and drawing wider community attention to the remembrance of the day. Although no new members joined the group from this activity, the artist felt that she was more fully accepted by the group afterwards. This banner has initiated a small group of women committed to peace. The artist has also continued to liaise and meet with the women as time permits. Future group plans include: making kimonos to wear when carrying the banner, participating in the Palm Sunday March, an observance of Hiroshima Day activity, which is yet to be decided, establishing contact with a sister-town in USA and USSR and supporting Eltham Council's stance as a Nuclear Free Zone. (The banner habits of the Eltham tribes : Eltham Shire "as we are" Community Banner Project report /​ by Jacky Talbot, Shire of Eltham, Feb. 1987, p46) Used in Shire of Eltham display at the Eltham Community Festival, 7 November 1987. Shire of Eltham Engineering Department Providing the resources to undertake • Survey, design, consultation • Road construction and maintenance • Bridge construction and maintenance • Street sweeping • Drain and pit cleaning • Traffic engineering installation and maintenance • Garbage collection • Tip management, land reclamation and beautification • Maintenance of community buildings • Provision of community and recreation facilitiesIllustrative of services provided by former Shire of ElthamColour photograph 20 x 29 cm mounted on green-painted chipboard 28 x 35.5 cm (string on back for hanging) Ref: 01842-0Title printed on label adhered to board below photograph (replaced June 2017)display panel, eltham festival, eltham peace banner, hiroshima day banner, infrastructure, shire of eltham, laurel eckersall, anne laurence, betty johnson, joan maclagan

This Marching Bass Drum is mid-size at 68 cm; these drums can range from 35 to 81 cm (14 to 32 inches). A Marching Bass Drum is slightly smaller than a Concert Base Drum and larger than a Kit or Drum Set Bass Drum. The drum is supported by a shoulder harness with a pin that connects to the eyelet incorporated on the shell of the drum, which keeps the drumheads vertical. The drum is played with one or two felt-covered drum mallets. The six tension rods connected between the drumheads can be screwed tighter or looser to change the tension of the calfskins on the drumheads, which changes their tune. This Marching base drum was made in the early 1920s by the firm Ludwig & Ludwig of Chicago, Illinois, USA. LUDWIG & LUDWIG: - William F. Ludwig was a professional drummer. He and his brother Theobold established the Ludwig & Ludwig drum factory in Chicago in 1909. They became famous for their invention of a bass drum pedal that could play faster beats on the bass drum. Theobald passed away in 1918. By 1923 Ludwig was the biggest drum manufacturer in the world. William continued on when his business was bought by C.O. Conn, but in 1937 he left to begin his own company; the WFL Drum Company. William and his son Bill purchased the Ludwig & Ludwig name back from Conn, and the name William F. Ludwig II continued on. The brand was sold to the Selmer Company and moved to Monroe, North Carolina in 1998, at the time of the 75th anniversary of the Ludwig name. Ludwig drums are still being manufactured over 100 years later. Many famous musicians and bands played the Ludwig bass drum, including Ringo Star who was the drummer in the 1960’s group The Beatles.This marching bass drum is significant for its connection to Ludwig & Ludwig, a famous and popular drum manufacturer established in 1909. The firm was once the largest drum manufacturer in the world. It is known for supplying drummers of fame, such as Ringo Star of The Beatles. This is the only drum in our collection. It is also rare, having only six tension rods, where most have from eight to twelve.Marching Bass Drum; the polished shell around the body is one continuous sheet of timber that has been steamed, shaped into a cylinder and joined together. The drumheads on the sides of the shell are strong timber strips joined into hoops that hold stretched, hand-painted white calfskin. Six Long Tube threaded nickel-plated brass tension rods are evenly spaced around the drumheads between the drumheads. A brass eyelet is fitted into the shell halfway between each drumhead, providing a connection point for the drummer’s shoulder harness. The eyelet has an indecipherable inscription. An oval brass plaque with a central formed hole has a stamped inscription. The imperial size is 27 x 13 inches. The drum was made by Ludwig and Ludwig, Chicago, Illinois, in early 1920's. On brass plaque; “LUDWIG / TRADE MARK / LUDWIG & LUDWIG / CHICAGO”flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, shipwreck artefact, marching drum, bass drum, marching bass drum, pitched drum, band drum, drum mallet, marching band, military band, percussion instrument, calfskin, shoulder harness, ludwig & ludwig, wfl drum company, william f. ludwig, chicago, north carolina, the beatles, tension taps, tension rods, drum pedal, long tube tension rods

This shipwreck artefact is a section of wood from the vessel “Success, a former immigrant ship, and later a convict hulk at Melbourne. The sailing ship “Success” was a teakwood vessel built in Natmoo (Natmaw), Tenasserim, Burma (now Myanmar) in 1840 for Cockerell & Co., Calcutta. Over its lifetime of 106 years, it was used to trade in the Indian subcontinent, to transport free emigrants to Australia, as a prison hulk in the Port of Melbourne for both hardened criminals, and later for women and boys, as a storage vessel for ammunition, a reformatory, and as a floating museum sent around the world to tell the tale of the convict era. During the time “Success” was used as a museum, pamphlets were distributed to paying customers advertising erroneously, that the “Success” was the oldest ship in the world. The “Success” sank and was re-floated twice: the first in Sydney in 1885, the second in the USA in 1918, before it was finally burned and sank July 4, 1946 in Lake Erie, near Sandusky, Ohio in 1946. Although the “Success” was home to prisoners while berthed in the Port of Melbourne, it was not used as convict transport. There has been speculation that Ned Kelly’s infamous armour was displayed on the “Success”, but this cannot be verified. Another link to Ned Kelly is Henry Johnson, an Irish prisoner on the Success, who was implicated in the murder of the ship’s warder, and later Johnson was supposedly a bushranger with Ned Kelly. It is also rumoured that Ned Kelly’s father John was a passenger on the Success, but this is also unverified. There are over 16 other ships named “Success”, although one in particular causes some confusion when researching “Success” in Australia. This other ship – the “HMS Success” was a 28 gun frigate built in1823, which was broken up in 1849. It also sailed to Australia. Statement of Significance: This piece of wood from the “Success” is connected to the ship Success, built in Burma in 1840. The “Success” is connected to the history of Australia because she was used as a merchant ship to transport immigrants to Australia, as a prison ship in Melbourne, a storage vessel, and as a floating “convict” museum, which travelled the world. Section of wood from ship “Success”. Wood appears to have been partially burnt, saw marks faintly visible on wood, remnant of a label with handwriting in black inklabel marked in script handwriting “Convict ship / “Success””flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, sailing vessel success, wood sample of sailing ship success, cockerell & co. calcutta

In the 18th century, spring scales appeared. To produce these scales, a manufacturer would use the resistance of a spring to calculate weights, which could be read automatically on the scale’s face. The ease of use of spring scales over balance scales is what led most post offices to outfit their clerks with spring postal scales. One of the most common types of spring scales was the kitchen scale—also known as a family or dial scale. Designed for horizontal surfaces, these scales used the weight of goods in a pan at the top of the scale to force the spring down. Such scales were common in early-20th-century households and were sold by Sears and Montgomery Ward. Many had flat weighing surfaces but some were topped by shallow pans. Companies such as Salters, Chatillon, and Fairbanks made both. SALTER HOUSEWARES began in the late 1760 in the village of Bilston, England. At this time Richard Salter, a spring maker, began making 'pocket steelyards', a scale similar to the fisherman's scale of today. By 1825 his nephew George had taken over the company, which became known as George Salter & Co. and later established a large, well equipped manufacturing site in the town of West Bromwich. The business thrived throughout the 1900s, and in 1972 the company was purchased by Staveley Industries Plc. In 2002, the management team at Salter Housewares Ltd, backed by Barclays Private Equity, bought the company out from the group, to concentrate on its consumer businesses. In 2004 was sold to the US-based HoMedics company, and in 2006, Salter Housewares USA and Taylor Precision Products Inc (also owned by HoMedics) merged. A portable, brass balance scale , 'Salters' for weighing items. A steel ring holds a brass plate marked with graduations 0 – 26 to which is attached a steel hook. ( rope & arrow TM ) / SALTER / POCKET / BALANCE / MADE IN ENGLAND Graduated 0 – 26 / PATENT / No. 8 Base rope & anchor S (trade mark) pioneers, early settlers, market gardeners, moorabbin, brighton, cheltenham, tools, craftsman, balance, scales, weights, imperial measure,, salter housewares pty ltd, west bromwich, england, salter george, salter richard, bilston england,

This suit was owned by Steve Lee, a three time Australian Olympian who competed at Sarajevo 1984, Calgary 1988 and Albertville 1992. He also achieved 1st in the Furano World Cup Super G in 1985. Steve Lee grew up in Falls Creek and had skis on his feet when he was just two years old. He later became a member of the Falls Creek Race Club and at the age of 14 won State and National Junior titles. After repeated success, Steve was selected to race overseas in the Australian Junior team. He won the Australian Open Championship at the age of 17. For 10 years, Steve never missed a race in the World Cup Circuit. Overall, He claimed 20 top 15 finishes in Downhill, Super-G and combined events. Towards the end of his career Lee swapped the World Cup circuit for the World Pro Tour in the USA, winning the Pro Downhill Tour ‘King of the Mountain’ title. He was also running a photography business in Falls Creek and was also involved in sports commentating on Australian television. This included commentating Alpine Freestyle events at four Winter Olympics and several World Championships. Steve co-founded Chill Factor Ski magazine and spent a decade as a National Selector and President of Falls Creek Race Club. He also became involved in movies, working with Roger Moore and Jackie Chan as a stuntman. As well as these activities Steve started guiding in the mid-90s and established Back Country Tours at his home area in Falls Creek Australia and also in Hakuba, Japan in 2011.This item is significant because it was worn and donated by an Australian Triple Winter Olympian who began his skiing career with Falls Creek Race Club.A green and gold Spyder brand ski suit worn for downhill skiing Olympic events by Steve Lee.Spyder brandsteve lee, winter olympics, australian triple winter olympian, falls creek race club

Steve Lee is a three time Australian Olympian who competed at Sarajevo 1984, Calgary 1988 and Albertville 1992. He also achieved 1st in the Furano World Cup Super G in 1985. Steve Lee grew up in Falls Creek and had skis on his feet when he was just two years old. He later became a member of the Falls Creek Race Club and at the age of 14 won State and National Junior titles. After repeated success, Steve was selected to race overseas in the Australian Junior team. He won the Australian Open Championship at the age of 17. For 10 years, Steve never missed a race in the World Cup Circuit. Overall, he claimed 20 top 15 finishes in Downhill, Super-G and combined events. Towards the end of his career Lee swapped the World Cup circuit for the World Pro Tour in the USA, winning the Pro Downhill Tour ‘King of the Mountain’ title. He was also running a photography business in Falls Creek and was also involved in sports commentating on Australian television. This included commentating Alpine Freestyle events at four Winter Olympics and several World Championships. Steve co-founded Chill Factor Ski magazine and spent a decade as a National Selector and President of Falls Creek Race Club. He also became involved in movies, working with Roger Moore and Jackie Chan as a stuntman. As well as these activities Steve started guiding in the mid-90s and established Back Country Tours at his home area in Falls Creek Australia and also in Hakuba, Japan in 2011.This image is significant because it captures an Australian Winter Olympian and pioneer of the Falls Creek Ski community.A colour photo of Steve Lee in his uniform featuring the logo of the Albertville Winter Olympic Gamessteve lee, australian olympians

Steve Lee grew up in Falls Creek and had skis on his feet when he was just two years old. He later became a member of the Falls Creek Race Club and at the age of 14 won State and National Junior titles. After repeated success, Steve was selected to race overseas in the Australian Junior team. He won the Australian Open Championship at the age of 17. For 10 years, Steve never missed a race in the World Cup Circuit. Overall, he claimed 20 top 15 finishes in Downhill, Super-G and combined events. Towards the end of his career Lee swapped the World Cup circuit for the World Pro Tour in the USA, winning the Pro Downhill Tour ‘King of the Mountain’ title. He was also running a photography business in Falls Creek and was also involved in sports commentating on Australian television. This included commentating Alpine Freestyle events at four Winter Olympics and several World Championships. When the Summer Olympics were held in Sydney in 2000, Steven participated in the Torch Relay. The Torch departed from Athens on the 10th May 2000 and arrived in Sydney on 15th September 2000. The journey totalled 129 days, including 100 days travelling through every State and Territory of Australia. After 67 days in Australia, on 13 August 2000, the Olympic Torch reached the 'high point' in its 100-day journey. At 1,861 metres above sea level, the flame burned bright against a darkening sky as three-time Winter Olympian Steve Lee skied with it down the summit ridge of Mount Hotham towards a crowd of 5,000 in the mountain village. The certificate acknowledges Steve Lee's participation in the event.This image and certificate are significant because they capture an important event in Australian sporting history.Two colour photos of Steven Lee lighting the cauldron at the Hotham Village for the overnight stay of the Olympic Torch in 2000. Also included is a certificate in recognition of his contribution to the Sydney 2000 Olympics.On Certificate:- CITIUS ALTIUS FORTIUS STEVE LEE IN RECOGNITION OF AND APPRECIATION FOR YOUR CONTRIBUTION TO THE SUCCESS OF THE GAMES OF THE XXVII OLYMPIAD EN RECONNAISSANCE DE VOTRE CONTRIBUTION AU SUCCES DES JEUX DE LA XXVII OLYMPIADEsteve lee, sydney torch relay 2000, australian olympians

This tabard is one of a small number that were produced/woven by Japanese master weaver Jun Tomita during the period that he was resident artisan at the Jam Factory in Adelaide. The tabard incorporates Ikat/Kasuri woven central panels. Tomita was born in 1951 in Toyama prefecture, and is based in Kyoto, the textile centre of Japan. The technique he uses kasuri (the Japanese term for ikat) is selectively pre-dying yarns before weaving to create pattern. The other decorative features of this garment are based on Japanese family crest designs (kamon). The pointed shoulders of this garment are reminiscent of the stiffened shoulders of kataginu, the upper part of the kamishimo ensemble that was formal wear for samurai men. Tomita was at the Jam factory from 1976-78 and he has works in numerous public collections, including: - Stanthorpe Art Museum, Art Gallery of South Australia / Australia - Oslo National Gallery / Norway - National Museum of Israel / Israel - Stedelik Museum, Museum of Rotterdam / The Netherlands - Denver Art Museum, St. Louis Art Museum, Long House Foundation - Cooper-Hewitt Museum of Art/USA - Victoria and Albert Museum, UK - Toyama Prefectural Museum of Art, Japan The donor purchased this tabard from an exhibition held at Wool House in Parkville Victoria, which was sponsored by the Australian Wool Board to promote the use of Australian Wool in textiles and fashion at that time, around April/May in 1977. At that time (1976-1977) the donor owned and run a retail/display shop for craft products such as ceramics, artworks and jewellery. The donor subsequently retained this in storage with some other items since the business closed.Double sided reversible tabard featuring woven centrals panels. One side is navy blue with white and blue detail panels, one side is grey with green, brown and cream central panel detail.textile, tabard, japan, art, clothing, weaving, fashion, design, ikat, kasuri

Mim (Mariam) Sodergren developed innovative, specialized ski programs for women and children in both Australia and the United States. She and her husband Mike originated from Tahoma, California, USA. They spent 17 years of their lives without a summer, working as ski instructors in Lake Tahoe during the northern winters, and then they’d head off to Falls Creek and Thredbo in Australia. Mim and Mike Sodergren were both inspiring instructors at Falls Creek Snowsports School, dedicated to education and had a deep-seated passion for fostering an inclusive Snowsports community. Tragically Mim and Mike were among the 18 people killed on 30 July 1977 in Thredbo, Australia, when a landslide tore through Thredbo’s ski resort village and demolished two staff lodges. In 1997 the Australian Professional Snowsport Instructors (APSI) established the Sodergren scholarships in memory of Mim and Mike. The Sodergren Scholarship recognises the rising potential of Snowsport instruction within Australian ski resorts and allows the recipients to further their professional development by providing all training free of charge for one season. The women’s program still operates at Falls Creek and is a "heartfelt tribute to the memory of Mim Sodergren. Designed by women, for women, and inspired by the enduring passion of Mim and her partner, Mike, who was also an instructor, this program is a wonderful opportunity to learn to ski in a friendly and supportive environment, just as Mim envisioned." (Falls Creek Website 2024). Mike’s Men’s Ski Program at Falls Creek is also named in honour of Mike Sodergren. Mim’s skis were kept for many years by Ski Lifts at Falls Creek and were recently donated to the Falls Creek Museum for safe keeping.These skis are significant because they belonged to an iconic ski instructor still commemorated at Falls Creek, Victoria.A pair of Atomic Arc Skis, primarily black with coloured logo.ATOMIC ARC MODULE 645SLmim sodergren, mike sodergren, atomic skis, thredbo landslide

This wooden spoke handle is from the wheel of the sailing ship “Success”, a former immigrant ship and later a convict hulk at Melbourne. The sailing ship “Success” was a teakwood vessel built in Natmoo (Natmaw), Tenasserim, Burma (now Myanmar) in 1840 for Cockerell & Co., Calcutta. Over its lifetime of 106 years, it was used to trade in the Indian subcontinent, to transport free emigrants to Australia, as a prison hulk in the Port of Melbourne for both hardened criminals, and later for women and boys, as a storage vessel for ammunition, a reformatory, and as a floating museum sent around the world to tell the tale of the convict era. During the time “Success” was used as a museum, pamphlets were distributed to paying customers advertising erroneously, that the “Success” was the oldest ship in the world. The “Success” sank and was re-floated twice: the first in Sydney in 1885, the second in the USA in 1918, before it was finally burned and sank on July 4, 1946 in Lake Erie, near Sandusky, Ohio, in 1946. Although the “Success” was home to prisoners while berthed in the Port of Melbourne, it was not used as convict transport. There has been speculation that Ned Kelly’s infamous armour was displayed on the “Success”, but this cannot be verified. Another link to Ned Kelly is Henry Johnson, an Irish prisoner on the vessel Success, who was implicated in the murder of the ship’s warder. and later, Johnson was supposedly a bushranger with Ned Kelly. It is also rumoured that Ned Kelly’s father John was a passenger on the Success, but this is also unverified. There are over 16 other ships named “Success”, although one in particular causes some confusion when researching “Success” in Australia. This other ship – the “HMS Success” - was a 28 gun frigate built in1823, which was broken up in 1849. It also sailed to Australia.Thiswooden ship's wheel handle was once part of the ship’s wheel of the sailing ship “Success” , which was, built in Burma in 1840. The “Success” is connected to the history of Australia because she was used as a merchant ship to transport immigrants to Australia, and was also used as a prison ship in Melbourne, a storage vessel, and as a floating “convict” museum, which travelled the world. Ship's wheel handle. Hndle from the wheel of sailing ship, the “Success”. The shaped handle is domed at one end, becoming narrower towards the other end, then flattened out into a beveled circle. The handle has an inscription written in pencil."Success"flagstaff hill maritime museum, maritime museum, sailing ship success, ship's wheel spoke, ship's steering wheel, prison ship, prison hulks, convict ship, spoke handle, ship's wheel, navigation equipment, steering wheel

150 years of experience and commitment. Norwegians have been producing and exporting cod liver oil for more than 1000 years. But it was not before 1645 it was reported that cod liver oil could be used to prevent and cure disease. At the end of the 18th century the first scientific article was published to support this. In the middle of the 19th century, the pharmacist Peter Möller observed that people along the west coast of Norway consuming cod liver oil regularly were rarely ill. He dedicated himself to finding out how this healthy liquid could be produced with better taste and pureness at a lower price. He developed a method of using steam to extract the oil from fresh cod livers. Based on this technological advance, the company Peter Möller was founded in 1854 in Lofoten on Norway’s arctic coast, where you find pure, cold, clean seas and high quality raw material. Peter Joachim Möller (1793-1869) At first Möller’s Cod Liver Oil was believed to be a good source of vitamin D and A, and the health benefits were associated with these vitamins. Peter Möller believed, however, that there were other significant benefits from fatty acids and other ingredients in the cod liver oil – both known and unknown. Peter Möller was dedicated to understanding more about these benefits. His dedication and commitment is clear in Möller's vision to improve people’s health by delivering the highest quality omega 3 products. Timeline 1793 Peter Möller is born in Røros, Norway 26 April. 1819 Peter Möller travels to Christiania (Oslo) and is employed by the pharmacist Frantz Peckel at the Svane chemist. He is employed on condition that he passes his pharmaceutical exam within one year. 1822 Graduated as a pharmacist with a unanimous first grade and with the award of the Professor's special satisfaction. 1842 Together with professors A. Holst and Chr. Boeck, Peter Möller participates in the commission which develops the first Norwegian Pharmacopoeia. 1853 Peter announces his method to cod liver oil works along the coast. He equips cod liver oil factories with new equipment in Lofoten, Ålesund and Kristiansund. The facility outside Ålesund is the most important for testing the method. 1854 The Peter Möller company is established as production has started at the three factories. Sales are lower than anticipated even though the quality is considerably better with the new method. The consumers of cod liver oil had been used to the fact that “good medicine must taste bad” and would not believe that the new and better quality was as healthy. Therefore, the following years are used to introduce consumers to the product, and also to convert more producers to the new method. 1869 Peter Möller dies. There are 70 cod liver oil steamers which use his steam rendering method, and 5000 barrels are produced every year. Möller’s company increases the quality by better routines for quality controls. 1870 Severin A Heyerdal, Möller’s son-in-law, assumes the leadership of the firm after Peter's death. He continues the work by improving the quality of the cod liver oil. The goal was to make it as pure and unaltered as in the liver. At this time, Möller had already started selling its product in the USA. In 1870, WH Schieffelin & Co. ("The oldest drughouse in America") was engaged by Peter Möller in the USA. 1881 Frantz Peckel Möller assumes the leadership of the Peter Möller company. He saw it as his duty to further the work on cod liver oil, and through a combination of solid scientific education and an eminent sense of the great mercantile possibilities, he made Möller’s cod liver oil the number one in the world market. 1914 The first world war leads to Möller’s bottled cod liver oil being shut out of the export market. However, domestic sales are good. 1924 The subsidiary Møystad Möller & Co. is established for bulk exports and the Association of Medicinal Cod liver oil Exporters is established in Bergen in 1925. 1925/26 The green bottles are introduced. Medicinal cod liver oil exports remain almost constant, while total Norwegian cod liver oil exports increase. 1938 The factory on the Løren grounds in Oslo, Norway is built. The factory is in the same place today. Peter Möller’s Pharmaceutical Laboratorium A/S is also established to separate out the scientific business. Investment is made in a new facility for refining and bottling veterinary cod liver oil, and increased production of industrial cod liver oil. 1940 The outbreak of the 2nd world war sees exports fall dramatically, while cod liver oil’s significance as a dietary supplement receives increased attention. Domestic sales increase strongly. 1945 After the war, medicinal cod liver oil retains its high status as an important dietary supplement in the “rebuilding" of the country. Cod liver oil becomes an ”emergency product in ravaged areas where the supply situation is difficult. Competition from other countries such as the USA, England and Iceland increases, and Norway no longer dominates the market. 1983 Möller’s cod liver oil in capsule form is launched and palatable cod liver oil is launched. 1990 Peter Möller A/S merges with Orkla Borregaard A/S (now ORKLA) 2005 Peter Möller merges with CollettPharma. The new company is called MöllerCollett. 2007 Merger between MöllerCollet and DanskDroge. The new company is called Axellus. Oval in section with a thin neck, mauve tinted clear glass bottle with text embossed on side.On side : 'P.MOLLER', 'OL JECOR', 'GADOR VER', 'CHRISTIANIA'.cod liver oil, norway, peter moller, christiana, oslo

Now 100 years old, this quilt belonged to the donor’s grandfather John William Huffstutter. John was Born in 1898 in a log cabin in the Ozark mountains of Missouri, USA. Tragically, John’s mother died when he was four years old. John said that he could always remember her voice calling his name as he hid under the porch in one of the many thunderstorms that frequent the area with his dog. John was raised by his grandmother and was treated as the youngest to her other children, growing up with his aunties and uncles rather than brothers and sisters. John began to study engineering at the State University of Iowa before serving in the US Army Engineer Corps in The Great War. He enlisted when he became eligible and served briefly before the Great War ended. He then returned to his engineering studies in Iowa, and shortly after finishing his studies got his first job with Westinghouse in Pittsburgh at age 23. It was when John was leaving for this job that he was given the quilts as a reminder of home from his grandmother Sarah Jane "Sallie" Tindall Coble, and her daughter (John's Aunt) Ottie Maude Coble Bittick. Widowed at age 78, John took to sleeping in his screen porch under one of these quilts. John remembered one winter in Missouri waking in his log cabin to find snow covering him and his quilt. When he died at age 94, the quilt he used was completely worn out and discarded. This remaining quilt was shipped to Australia, where Carol’s (the donor) immediate family had emigrated in 1970. Opening the box that contained the quilt released a wave of comforting smells, emotions, and a flood of childhood memories. Carol distinctly remembers sleeping under these quilts for afternoon naps at her grandparents' house. The quilt is 74 x 80 inches (1880 x 2030mm), matching the size of a modern-day king bed. It is made of various four-inch (100mm) squares. These squares are made of old men woollen suits in dark colours of browns and greys. The quilt is layered with a wool backing fabric and a batting lawyer of unknown material, possibly cotton or wool. The quilt is tied together with red wool yarn and the backing fabric is folded over the edge to be used as a binding. Embroidered across the front of the quilt in purple wool yarn is "John Huffstutter", "13 Oct 1921". A small, printed cloth label "HUFFSTUTTER" is pinned on the reverse of the quilt. The quilt is well-worn but in good condition considering its age. The care instructions passed down by word of mouth with the quilt were to "never wash, only air".Front embroidered. Purple handstitching: "John Huffstutter / 13 Oct 1921" Reverse. Printed cloth label: "HUFFSTUTTER"ozark, missouri, usa, textile history, quilt heritage

MIM SODERGREN and the WOMEN'S SKI PROGRAM The Women's Ski Program at Falls Creek and Thredbo was initiated in the mid 1980s. One of the most popular instructors involved in this program was Mim (Mariam) Sodergren. Mim developed innovative, specialized ski programs for women and children in both Australia and the United States. She and her husband Mike originated from Tahoma, California, USA. They spent 17 years of their lives without a summer, working as ski instructors in Lake Tahoe during the northern winters, and then they’d head off to Falls Creek and Thredbo in Australia. Mim and Mike Sodergren were both inspiring instructors at Falls Creek Snowsports School, dedicated to education and had a deep-seated passion for fostering an inclusive Snowsports community. Tragically Mim and Mike were among the 18 people killed 30 July 1977 in Thredbo, Australia, when a landslide tore through Thredbo’s ski resort village and demolished two staff lodges. In 1997 the Australian Professional Snowsport Instructors (APSI) established the Sodergren scholarships in memory of Mim and Mike. The Sodergren Scholarship recognises the rising potential of Snowsport instruction within Australian ski resorts and allows the recipients to further their professional development by providing all training free of charge for one season. The women’s program still operates at Falls Creek and is a "heartfelt tribute to the memory of Mim Sodergren, a beloved 1980s instructor and mentor who tragically lost her life in the Thredbo landslide in 1997. Designed by women, for women, and inspired by the enduring passion of Mim and her partner, Mike, who was also an instructor, this program is a wonderful opportunity to learn to ski in a friendly and supportive environment, just as Mim envisioned." (Falls Creek Website 2024). Mike’s Men’s Ski Program at Falls Creek is also named in honour of Mike Sodergren.These photos are significant because they commemorate an innovative ski instructor lost through the tragedy at Thredbo in 1997.Two colour photos showing groups of women participating in the Ladies' Group at Falls Creek in the 1980s, as well as a photo of Mim and Mike Sodergren. Image 1 Left to right: Leonie Docking, Carol Bartholomew, Mim Sodergren, Blanche Spargo, Jane Zagorski, Rosanne Osborn and Di Mashford Image 2 Left to right : Pat Smart, Blanche Spargo, Margaret Smith, Pam Mero, Iris Jones, Jennifer Reuter, Lee Lowther, Jane Zagorski, Mim Sodergren Image 3: Mim and Mike Sodergrenwomen's ski program, falls creek ski school, mim sodergren

Giovanni Caberlotto was born on 27 February 1941 in Montebelluna, Italy into a family of boot makers and street vendors. In 1960 Giovanni was called up for military training and enlisted in the Alpini skiing company, learning to ski and gained a military instructor's license. During this time, he learned to recognize boots and materials and looked for innovative solutions to make them more comfortable. He returned home after his military service and convinced his father he no longer wanted to be a street vendor. In 1963 the Caberlotto family sold a piece of land to finance the new business: Caber and established a ski boot factory. In 1965, upon the death of his father, Giovanni took over the reins of the family business. He looked with interest at a new material for ski boots: plastic, travelling to the USA to carry out further investigation. Giovanni began to use plastic polymers which, once heated and melted, were injected directly into the mold and left to cool. He also began a range of sponsorships to promote his brand including the 1964 World Cup slalom event in Cortina d'Ampezzo. He also gained a four year deal with the Italian Winter Sports Federation (FISI). In 1974 he sold Caber to the US company Spalding, remaining as President of the company until 1979. In 1974 the Caberlotto brothers exploited the second part of the family surname and founded Lotto. For non-competition reasons they work on tennis and leisure shoes. The new company, in addition to tennis, becomes a successful brand in football, basketball and athletics. Giovanni left Spalding in 1980 and returned to Montebelluna, becoming the General Manager of Lotto. He died on 3 March 1997 In 1990, Rossignol acquired the Caber boot factory in Italy and rebranded the product under the Rossignol label.These boots are significant because they represented an advance in ski boot technology and were a popular brand in the 1970s.Lime green and black Caber ski boots. Each boot has five metal fastenings.On side of boots - Cabercaber ski boots, skiing equipment, skiing technology

The Kangaroo Hoppet is Australia’s premier long distance cross country ski race, and a member of the Worldloppet series of international cross country ski events. After running the event for 10 years, it was decided they should become part of the Worldloppet series of marathon ski races. Representatives from the Birkebeiner Nordic Ski Club and the Australian Ski Federation attended the Worldloppet Annual Meeting in Finland in June 1990 to put the case for the acceptance of an Australian event into the Worldloppet series. Before being admitted, they had to demonstrate that the Birkebeiner Club could run a world class event, so three months later in August 1990 a 42km event named the Australian International Ski Marathon was held at Falls Creek together with a 21km Birkebeiner race and a 7km event called the Birkebeiner Lite. The event was approved by delegates from USA, Norway and Austria, in 1991 Australia became the 12th member of Worldloppet, with the condition that there had to be a name change. After some late night discussion allegedly involving red wine from North East Victoria the main event became the 42km Kangaroo Hoppet, with the minor events being the 21km Australian Birkebeiner, and 7km Joey Hoppet. In the winter of 1991, the first Kangaroo Hoppet was held. It was a great success and has been a regular fixture on the international ski calendar ever since. It features the main 42km event as well as a 21km event and a 7km event. The Hoppet brings the Australian snowfields to an international audience. In 2011 the Men's Winner was Petr Novak from the Czech Republic in a time of 1:16:04. The winner of the Women's event was Esther Bottomley of Australia in a time of 1:42:22. Due to lack of snow, the course had to be relocated to the Mt McKay area at the top of the ski resort. The 42km Hoppet course was shortened to 30km.This poster is significant because it documents an event which brings international attention to Falls Creek and the surrounding region.A poster featuring a group of competitors from a previous Hoppet event. A Kangaroo Hoppet road sign is on the left. The page border is yellow. Logos of AGL, Falls Creek All Season Alpine Resort, Alpine Shire, Tourism Victoria, Parks Victoria and the Birkebeiner Nordic Ski Club are across the bottom of the poster.At the top: Kangaroo HOPPET 21 Australia's PREMIER X-COUNTRY SKI RACE On the road sign: KANGAROO HOPPET 42km Beneath the image 27th August 2011/ 42KM 21KM 7KM Below the line of logos: Ph. 03 5754 1045 / [email protected] www.hoppet.com.au Across the bottom in larger cursive text www.hoppet.com.aukangaroo hoppet, worldloppet events, falls creek, mt. beauty

Providing GA drawings of the following: R1146 – General Data of Tramcars – 24-9-1924 PMTT 160 - PMTT Bogie closed car (O class) PMTT 161 - PMTT Combination car PMTT 162 – Summer car (old type) – F class PMTT 163 - PMTT Bogie car PMTT 164 – Summer car – G class PMTT – 700 – Bogie Car with dropped centre compartment and longitudinal rattan saloon seats R2461 – class W – W class converted to W2 R2460 – class W1 R2459 – class W2 R2462 – class X R2464 – class Y R2463 – class X1 R2465 - class Y1 R3071 - class W3 R3076 - class A R3077 - class G R8617 - class Sw6 and W6 R3078 - Class C R3080 – Class X2 R3093A - Class T R3812 - class W4 R4382 - class T - arrangement for one man operation R4646 - class Sw2 R4678B - class W5 R4771A - Class SW6 R5818 - class SW5 R5963 - class A - One man Coburg type R6928 - PCC Car - double end operation (based on a USA drawing) R7416 - class L R8332 - PCC Type car (980) R8999 - Class A tramcar Coburg type original R9601 - class CW5 R9529 - class W7 R9622 - Proposed SW6 car with front entrance R9980 - Freight car 17 R10-129 - class VR R11-333 - Class Z1 and Z2 trams R11-387 - class Z 0 outside dimensions R11-580 - class Z3 tram R12-052 - class W5 sliding door conversion R12-062 - class A tram Articulated tram - class B2Yields information about the MMTB fleet including scrapped trams and their General Arrangement.Album or Set of 41 A4 sheets, photocopied with the title "MMTB Electric Tramways".trams, tramways, drawings, tramcars, tramcar design, preston workshops, mmtb

geared steam locomotive Built by the Lima Locomotive Works, USA in 1912 (Builder’s Number 2549). “Class a” 13 Ton (13.3 tonne) . This locomotive hauled freight on the Ali-Shan Forest Railway in Taiwan and is capable of pulling 90 Tons (91.8 tone) loads over steep gradients at low speeds. . This A-type Shay locomotive was built by Lima Locomotive Works, Ohio (builder's number 2549 of 1912) for the Alishan Forest Railway, Taiwan. The Alishan Forest Railway featured a large fleet of Shay locomotives and many still survive, together with a portion of the railway which is now a tourist operation. Alishan Shay No.14 was gifted to the Puffing Billy railway in 1971 by the Alishan Forest Railway - Taiwan Government forest Bureau and arrived on the 12th October 1971 at the Puffing Billy Museum at Menzies Creek. Loco: Shay No.14 ( Shop Number 2549 ) Class: A 18-2 ( 2-cylinders / 2-trucks Class A ) Built for: Alishan Forest Railway Bulit by Lima Locomotive Corporation In service 22 June 1912 Samuels, Samuels & Co., Ltd. (D), Taipei, Formosa (Japan); For: Alishan Forest RY #14, Kirun (Keelung), Formosa, (Japan) (1945) Alishan Forest RY #14, Keelung (Chilung), Taiwan (12 Oct 1971) Puffing Billy RY #14, Belgrave, Victoria, Australia Gauge 30" Status Preserved - In Storage at Museum There is only one original LIMA mark left on any of the Alishan RY Shays and it has no number. All of their Shays have been re-built, changing much of the original Lima product. Most were renumbered for various reasons without regard to Lima Shop Numbers over the years. "Girder Type Frame" details from http://www.shaylocomotives.com/data/lima3354/sn-2549.htm Historic - Industrial Narrow Gauge Railway - Geared Steam Locomotive which worked on the Alishan Forest Railway, Taiwan.geared steam locomotive - Class: A 18-2 ( 2-cylinders / 2-trucks Class A ) - made of wood and iron and wrought iron, Glass14puffing billy, shay, geared locomotive, steam locomotive, industrial narrow gauge railway, 2'6", ali shan forest railway

The Syracuse Chilled Plough Company was created in 1876 and specialised in the manufacture of agricultural ploughs. Harry Wiard invented the chilling process in plough manufacture. The company was originally founded as the Robinson Chilled Plough Company in 1876 and changed its name 3 years later. At its peak, in the early 20th century. The company made more than 100,000 horse-drawn ploughs and road scrapers of various designs that were sold from the Syracuse plant each year and exported around the world. The company slogan of the day was, “The sun never sets on a Syracuse plough." Eventually, other farming implements were added to the line. The company employed more than 300 people in its local plant, which covered a square block on the cities Near West Side. In 1910-11, Deere and Company began expanding its holdings, and with the success of the Syracuse Chilled Plough Company, Deere sought to acquire the company. The management of the Syracuse operation after John Deere took over remained in the hands of Wiard and Chase, and the manufacturing operations were left in Syracuse. The only change from previous Syracuse operations was the selling of the companies products through Deere retail outlets instead of directly to the trade. The factory in Syracuse continued to produce ploughs until 1955. The subject item in the Flagstaff collection is an early model Syracuse Chilled plough with a wooden beam frame it is very much lighter in weight and was adapted to work sandy or light loamy soil. This plough has a sloping landside, which tends to keep the clods and dirt from falling into the furrow, making the ploughman's work much more comfortable and easy. This design was made in eight sizes for both right and left-handed ploughing and became very popular in the far West and South of the USA. Note: The definition of a chill plough means : a plough having the share and mould-board of chilled semi steel or cast iron.The subject item is believed to be a very early plough given its wooden beam frame and was made before 1900 probably around 1880. This makes it a significant example of the types of plough that early settlers were using in Victoria. There would not be very many of this type of vintage plough left with a wooden beam and frame, making it today a desirable collector's item. Syracuse Wood Beam Chilled single furrow plough metal wheel in front. Syracuse Chiller Co Syracuse & 50 L stamped on ploughshare.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plough, syracuse chiller co, chiller plourh, farm equipment, furrow