snape collection

This uniform was worn by Bernie Farley, present secretary of Warrnambool RSL (2019). The uniform was made by Fletcher Jones & Staff, Warrnambool in 1998.Long sleeve Khaki shirt, two long sleeve button down breast pockets, six button fastenersPrinted on collar "SIZE 40 84" Printed on tag"A.G.C.F. VIC 1983 [ARROW MOTIF] 8405.66.088.7064 Size 40/84 SERVICE NO. NAME. DO BOIL OR WRING, MACHINE WASHABLE, DRIP DRY, IRON LIGHTLY WITH WARM IRON Patch on Left shoulder with rising sun, crown and cross. THE AUSTRALIAN ARMY.army uniform, military uniform, warrnambool ex service

Worn as part of a uniform, attached to the right shoulder of a jacket with the loose end in the right breast pocket. This jacket was worn by Bernie Farley, of the 8th/7th Battalion, Royal Victorian Regiment. This lanyard has social significance, being owned and worn by Secretary of the Warrnambool RSL, Bernie Farley. The lanyard was donated as part of a uniform set by Bernie Farley after 30 years of service in both the Australian Army and Royal Australian Air Force. Though worn in the 1990s, this uniform is in excellent condition as a representative example of an Infantry uniform of the period.Red cord lanyard with two loops knotted at either end; one knot has been looped around the lanyard to form an arm hole. The red colour signifies membership of the Australian Army.military uniform, ex-service, lanyard, army uniform, warrnambool

This uniform was worn by Bernie Farley, present secretary of Warrnambool RSL (2019). The uniform was made by Fletcher Jones & Staff, Warrnambool in 1998.Jacket with four pockets each with metal button fasteners. Four front metal button fasteners. One inside pocket . Regimental badges on lapels, Badge over right pocket. Epaulets with metal buttons, a crown and Australia. All metal buttons engraved with army insignia. Front metal button fasteners secured with safety pinsTag inside (left) FLETCHER JONES VICTORIA 1998 Arrow signifying govt. NAME. SERVICE NUMBER. 70% Wool, 30% Polyester, DRY CLEAN ONLY (A) Warm Iron ZC804B AR0003army uniform, military uniform, warrnambool ex service

Worn as part of a uniform, attached to the right shoulder of a jacket with the loose end in the right breast pocket. This jacket was worn by Bernie Farley, of the 8th/7th Battalion, Royal Victorian Regiment. This lanyard has social significance, being owned and worn by Secretary of the Warrnambool RSL, Bernie Farley. The lanyard was donated as part of a uniform set by Bernie Farley after 30 years of service in both the Australian Army and Royal Australian Air Force. Though worn in the 1990s, this uniform is in excellent condition as a representative example of an Army uniform of the period.Brown and white candy-striped cord lanyard with two loops knotted at either end; one knot has been looped around the lanyard to form an arm hole. The striped colour signifies membership of the 8th/7th Battalion, Royal Victorian Regiment.military uniform, ex-service, lanyard, army uniform, warrnambool

Worn as part of a uniform, by Bernie Farley, of the 8th/7th Battalion, Royal Victorian Regiment. This tie has social significance, being owned and worn by Secretary of the Warrnambool RSL, Bernie Farley. The tie was donated as part of a uniform set by Bernie Farley after 30 years of service in both the Australian Army and Royal Australian Air Force. Though worn in the 1990s, this uniform is in excellent condition as a representative example of an Army uniform of the period.Khaki tie with silk lining; tag attached to the reverse of the tie in the first quarter of the tie lenth. Label is sewn into seam on reverse. Label reads "AUSTRALIAN TIE CO./MADE IN AUSTRALIA", "65% POLYESTER/35% VISCOSE/MADE IN/AUSTRALIA", "DRY CLEAN/ONLY P50 [degree]/WARM IRON/USING INSERT."military uniform, ex-service, army uniform, warrnambool, tie, neck tie

Long khaki coloured heavy coat. Thick, sharp angled collars. Right collar has a hook and eye attached in the lapel split. Collar has zig zag stitching and two plastic buttons on each the left and right sides. Each shoulder has a lapel that is fastened with a plastic button. The coat is double breasted. Three buttons on the right side, held in place by metal loops on the interior rather than stiches; mirrored on the left side. Left interior has oval shaped fabric buttoned to the interior with two brown (possibly bakelite) buttons. A larger brown button sits atop the smaller as a means of closing the jacket from the inside. There are two pockets on the front that are angled with the highest point near the centre and the lowest point near the hips. The arms, underarm and upper back section contains an inside khaki coloured lining of thinner, most likely cotton fabric. Above this there is a thin strip of fabric attached at either short end to use for hanging the coat on a hook. At the back of the coat there is a single pleat stretching from the base of the neck to the base of the coat. Approximately half way down the pleat there is a split in the fabric that is fastened with two plastic buttons. At the waist there are two fabric flaps that fasten together at the back with three buttons, also held in place with metal loops on the reverse.Label on interior back lining reads "REGIMENTAL No./NAME" Label on interior of the right "GREATCOATS. G.S. 1946 Patt/SIZE 1/HEIGHT 5'3"/CHEST 34"-36"/BRADLEY'S INDUSTRIES N.S.W./1951" Handwritten on label, "M J Davis"post war, army uniform, great coat, inter war, uniform, military uniform, wool, greatcoats, bradley's industries

This uniform was worn by Bernie Farley, present secretary of Warrnambool RSL (2019), during service with the 8th/7th Battalion, Royal Victorian Regiment.Short sleeve Khaki shirt, two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a khaki coloured plastic button. Seven button fasteners down the centre front. Patch on left shoulder with rising sun, crown and cross.Printed on tag at interior near collar, "ADA/ [arrow motif]/2910002/OCT 2000/NSN: 8405 66 133 5956/ SIZE: 41/NAME/Service No/65% POLYESTER/35% COTTON/MADE IN AUSTRALIA" Patch on left shoulder reads "THE AUSTRALIAN ARMY".army uniform, military uniform, warrnambool ex service, australian defence apparel

This biscuit is called a 'Dog Biscuit' and was produced during WWI. It was part of a rashion kit to accompany another biscuit and a tin of Bully beef. The original owner was presumably a serviceman called Jack was and he created a souvenir for a loved one using another two biscuits, one including an inlaid photograph of himself and the other including an artificial flower decoration.This object is a rare piece. It is rare for items composed of edible goods to remain almost perfectly intact after a century after creation. This biscuit was presumably owned by the servicemand Jack who created a souvenir using another two similar biscuits. This imparts social, historical and research significance to the item.Dry biscuit with impressed inscription.Inscriptions on the front read: "Swallow / (indecipherable word) / Army / Wholemeal / Melbourne" biscuit, military rations, dog biscuit, ww1, world war 1, world war one, the first world war, the great war

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tunic (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary uniform. Service Dress is approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The Tunic consists of a jacket has a lapel collar, with two external chest pockets and exposed pocket flaps, two side jacket pockets with external flaps and two internal jacket pockets positioned just below the external chest pockets. There is a crescent shaped cloth badge 'AUSTRALIA' sown at the side/top of each sleeve and Squadron Leader - rank stripes sown around each sleeve on the upper wrist area. The Tunic is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. Maker: Australian Government Clothing Factory (A.G.C.F.) - Coburg Victoria The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tie (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: Austal

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Working Dress (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The short waist length jacket consists of a jacket has a lapel collar and zip front, with two external chest pockets and exposed pocket flaps, There are portlets on each shoulder that are fastened with a black plastic button. This button has a crown over eagle in flight on the front. Rank slides are slid onto these portlets and this jacket has Squadron Leader rank slides on the portlets. is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. The waist belt is part knitted on the sides and cloth on the front and rear. There is also one interior pocket on the right side below the exterior breast pocket. Maker: Australian Defence Industries The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) trousers- Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Defence Industries

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform - Tie (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: unknown

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Service Dress Uniform - Shirt (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: Australian Defence Industies

Issued to Aircraftsman Bernard Farley in 1976 as part of his initial issue of uniform on joining the Permanent Air ForceThis item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Peaked Hat - Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Government Clothing Factory

As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Woolen khaki peaked hat has a central head band with solid peak connected to the lower front of the head band. The top is high at the front and protrudes out from the headband about 3cm on all sides. There is a brown leather chinstrap on the lower front of the headband above the peak and this has a slide extension that can be enlarged to go under the neck to keep the hat in position in high winds. The chin strap in connected to the headband with two plastic button that have queens crown above a map of Australia. Affixed to the front of the headband above the peak is the Artillery Corps metal hat badge in gold colouring. The interior of the top of the hat has a cotton lining under the woollen exterior and then a plastic protective lining to avoid sweat bleeding onto the exterior. A cloth badge with the makers name sewn to the cloth lining and covered by the plastic protective layer. uniform

Hard Cover -Dark Green 3 copies. One with Dust Cover.WITH THE AUSTRALIAN ARMY AT HOME AND OVERSEAS Published for THE AUSTRALIAN MILITARY FORCES by AUSTRALIAN WAR MEMORIAL CANBERRA 1943 australian army. ww2. australia. overseas.

Hard Cover - Grey/Green 2 CopiesPublished for THE AUSTRALIAN MILITARY FORCES by AUSTRALIAN WAR MEMORIAL CANBERRA 1944ww2. pacific region. jungle.

Hard Cover, with images of soldiers on horseback.THEY WATCHED AND WAITED. On front cover above colour patches Author: Dr. Amoury Vane Publisher; Australian Military History Publications. 2000ww2. northern australia

The buttons relate to tailors in Warrnambool and District and some are stamped with relevant names. The collection provides a good sample of buttons and the types of materials and uses which were prevalent in the period. Rows of buttons in colours black, brown, fawn, silver, white, and Mother of Pearl. Mounted on cream card and framed with cream mount. Rows are labelled with small card inserts with names of local tailors and/or application and uses. Materials used are metal, bakelite, shell and fabric.The metal buttons have names of tailors stamped into them and bakelite buttons are either stamped or have raised lettering or symbols. Names on buttons as follows: Cramond & Dickson, Youngers, Warrnambool, W. J. Taggart, S Taggart, Fletcher Jones, W. A Burnett, W McDonald, Thompson Terang, R Carey, J Torrance Camperdown, F Williamson, Salvation Army. Types of buttons : Military, Navy, coat, vest, boot and shoe,shirt, trouser, coat, Pearl shell, linen, and fabric covered.warrnambool, buttons, cramond and dickson, youngers, w.j. taggart, burnett mcdonald thompson, terang williamson, j. torrance, fletcher jones, warrnambool military

This book was produced as a gift for Australian soldiers and their families on the Western Front in 1917. In the introduction General Birdwood, Commander of the ANZACS, explained it was for ‘…those whom we left behind in Australia, and who we know are thinking of us, some idea of our surroundings on the battle fronts…’.This book is a significant contemporary record of life for the Australian soldiers on the Western Front during World War 11.Grey cardboard covered 128 pp book with black and red writing on cover. the title, "FROM THE AUSTRALIAN FRONT" is in black print at the top above a black drawn sketch of two soldiers behind a mound and holding bayonets. at the foot is XMAS. 1917 inside a red rectangle with the insignia of the Australian Army (the rising sun) at the top. It contains cartoons, illustrations and photographs created by the soldiers themselves and put together in the style of an annual. military book-from-the-western-front world-war-11

Warrior Elite is a unique and compelling account of Australia's special forces and intelligence operations - ranging from the early special forces of World War II to the establishment and development of the SAS and Commando Regiments as the elite fighters of today, and from the Australian Security Intelligence Service to the Australian Signals Directorate and ASIO. It is an authoritative, gripping and thoroughly up-to-date account of both the history and current state of our special forces and intelligence bodies - and gives a unique glimpse into the warfare of the future. Our future. Robert Macklin has conducted dozens of exclusive interviews and uncovered incredible, daring and sometimes heartbreaking stories of the elite troops that guard our nation and engage in secret operations around the world. He has had significant cooperation from numerous sources within the special forces and the various intelligence agencies. Both thoroughly researched and colourfully written, Warrior Elite will attract the reader of action memoirs as well as those interested in broader military history and espionage. australian special forces, australian army, commandos, military history

During 1941-43 it was considered imminent that Japan's army may attempt to invade Australia. Anticipating Japanese air and submarine attacks, blackout restrictions were introduced and air raid warning instructions issued. This air-raid siren was installed on the roof of the G.P. Motors (originally Winchester & Rodwell Garage) during World War 2. This item reflect our past. World War II continues to evoke strong memories. Items which were part of this time are reminders of the local community's involvement.An air raid siren on a round base. It has a brass trumpet and a handle attached to pull from the ground.On base - MAX-DIA -422,15mm PLATE 10 HOLES J. WIPFLI GATIC AUSTRALIA MANUFACTURER DIES TOOLS PLASTICS MELBOURNEww11 air-raid-siren communications military

It took 15 years to invent the can. It took 100 more to invent a standard way to open it. In the 19th century, decades after the invention of canning, there were virtually no can openers. Canned food, such as sardines, came with its own "key" to peel back the tin lid. Birth of the can One of the oddest things about the can opener is that the can predates it by almost 150 years. Though common today, cans were once military-grade technology. In 1795, Napoleon, to whom the phrase "an army marches on its stomach" is attributed, offered 12,000 francs to anyone who could find a way to preserve food. Without any knowledge of bacteria or their role in food spoilage, scientists didn't even know where to begin. It took 15 years before a chef named Nicholas Appert claimed the prize after successfully jarring food. Soon after that, his countryman Philippe de Girard came up with a variant on Appert's method—metal tins—and sold the idea to the British. Spoiled food, and the sickness it caused, was a widespread problem. The public would have benefited from canned food, but for decades cans were almost exclusively for the army and the navy. The canning process, with its hours of boiling and steaming, its scrupulous cleanliness, its heated metal, and its need for a great deal of disposable material, made canned food far too expensive for anyone but the military. No can openers were needed or even possible. The metal of early cans was too thick to make openers practical. Soldiers and sailors had plenty of sharp objects on hand and made ample use of them when they wanted to eat. During the 19th century, the process of canning was refined and mechanised, and the metal wall of the average can slimmed down enough that a civilian could get it open—if that civilian had the right tool. No one had that tool yet, so early cans had to open themselves. In other words, they came with built-in openers. The result was a confusing but pleasing free-for-all, in terms of product engineering. Each type of food came with its own kind of can, and each kind of can came with its own kind of opener. Tinned fish and meat were often sold in rectangular cans. These cans were fitted with a "key" that would roll down the top of the can. Coffee, beans, and other types of meat were packaged in cylinders with metal strips that could be peeled back with their own kinds of built-in keys. Cans of milk, which didn't need to be completely opened, came with puncture devices. As tinned food became more common, its containers became more regular. A nice cylindrical can became the norm, and, as these cans filled kitchens, more engineers put their minds to finding a convenient way to open all of them. The first standalone can opener worked on a simple principle: point, stab, and pull. From the mid-19th century to the end of World War I, the typical can opener looked roughly like a wrench, if the lower 'jaw' of the wrench were replaced with a blade. People used the blade to puncture the top of the can near its edge, push the upper jaw against the side of the can, and drag the blade through the metal along the rim. Because meat was the first and most popular canned substance, these can openers were often shaped to look like cows and given the nickname 'bully beef can openers'. The bully beef can opener, popular in the mid-19th century, resulted in many lost fingers. Later, a corkscrew was added that was seated in the handle, and could be pulled out for use. Bully beef can openers were so common, effective, and sturdy that they are still frequently available on collectors' sites. Some are advertised as “still working,” and every last one of them is, without a doubt, soaked in the blood of our ancestors. Dragging a sharp blade along the edge of a can is certain to cause injury sooner or later. So once people got a reliable can shape and a reliable way to get the can open, the search was on for a reliable way to get a can open without the possibility of losing a finger. The answer came in 1925, from the Star Can Opener Company of San Francisco. This is probably the first can opener that resembles the one people have in their kitchens today. Instead of using a blade to pry open a metal can, buyers could clamp the edge of the can between two wheels and twist the handle of one of the wheels to move the blade around the lip. The Star can openers weren't perfect. Compared to the bully beef model, they were flimsy and breakable, but they probably prevented a few injuries. Six short years after the Star model came to market, the first electric can opener was invented. It was patented in 1931 by the Bunker Clancey Company of Kansas City, who had already been sued by the Star Can Opener Company for trying sell a double-wheeled can opener like the Star model (the case was dismissed). The electric can opener must have seemed like the wave of the future and a sure-fire seller, but it proved to be too far ahead of its time. In 1931 not that many households had electricity, and those that did weren't interested in buying can openers. The Bunker Clancey Company was subsequently bought by the Rival Company, which still makes small appliances like can openers today. It took another 25 years for electrically powered can openers to become practical. In the 1950s, Walter Hess Bodle and his daughter, Elizabeth Bodle, developed an electric can opener in the family garage. Walter came up with the opener's blades and motor, and Elizabeth sculpted the outside. Their can opener was a free-standing unit that could sit on the kitchen counter. The Udico brand of the Union Die Casting Company put it on the market in time for Christmas in 1956 and had great success with it. Over the next few years it came out in different styles and colours, and, like the bully beef can opener, has become a collector's item. Also like the bully beef model, Udico can openers often still work. They don't make 'em like they used to. Although there have been some design changes and refinements over the last sixty years, there have yet to be any more leaps forward in can opener technology. If you're resentfully opening a can, you are almost certainly doing it using the Star design, manually forcing the can between two wheels, or the Bodle design, clamping the can into a free-standing electrical opener. Whether or not you enjoy your holiday meals, at least you can be happy that you are not getting poisoned by your own food or cutting open your hand with the blade you use to get at it. That's something, right?The can opener, Bottle opener and the corkscrew are still very important and essential items in most kitchens.Metal can opener, chromed, with bottle opener, and a corkscrew seated in the handle.None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, canning, can opener, corkscrew, bottle opener, kitchen equipment

It took 15 years to invent the can. It took 100 more to invent a standard way to open it. In the 19th century, decades after the invention of canning, there were virtually no can openers. Canned food, such as sardines, came with its own "key" to peel back the tin lid. Birth of the can One of the oddest things about the can opener is that the can predates it by almost 150 years. Though common today, cans were once military-grade technology. In 1795, Napoleon, to whom the phrase "an army marches on its stomach" is attributed, offered 12,000 francs to anyone who could find a way to preserve food. Without any knowledge of bacteria or their role in food spoilage, scientists didn't even know where to begin. It took 15 years before a chef named Nicholas Appert claimed the prize after successfully jarring food. Soon after that, his countryman Philippe de Girard came up with a variant on Appert's method—metal tins—and sold the idea to the British. Spoiled food, and the sickness it caused, was a widespread problem. The public would have benefited from canned food, but for decades cans were almost exclusively for the army and the navy. The canning process, with its hours of boiling and steaming, its scrupulous cleanliness, its heated metal, and its need for a great deal of disposable material, made canned food far too expensive for anyone but the military. No can openers were needed or even possible. The metal of early cans was too thick to make openers practical. Soldiers and sailors had plenty of sharp objects on hand and made ample use of them when they wanted to eat. During the 19th century, the process of canning was refined and mechanised, and the metal wall of the average can slimmed down enough that a civilian could get it open—if that civilian had the right tool. No one had that tool yet, so early cans had to open themselves. In other words, they came with built-in openers. The result was a confusing but pleasing free-for-all, in terms of product engineering. Each type of food came with its own kind of can, and each kind of can came with its own kind of opener. Tinned fish and meat were often sold in rectangular cans. These cans were fitted with a "key" that would roll down the top of the can. Coffee, beans, and other types of meat were packaged in cylinders with metal strips that could be peeled back with their own kinds of built-in keys. Cans of milk, which didn't need to be completely opened, came with puncture devices. As tinned food became more common, its containers became more regular. A nice cylindrical can became the norm, and, as these cans filled kitchens, more engineers put their minds to finding a convenient way to open all of them. The first standalone can opener worked on a simple principle: point, stab, and pull. From the mid-19th century to the end of World War I, the typical can opener looked roughly like a wrench, if the lower 'jaw' of the wrench were replaced with a blade. People used the blade to puncture the top of the can near its edge, push the upper jaw against the side of the can, and drag the blade through the metal along the rim. Because meat was the first and most popular canned substance, these can openers were often shaped to look like cows and given the nickname 'bully beef can openers'. The bully beef can opener, popular in the mid-19th century, resulted in many lost fingers. Bully beef can openers were so common, effective, and sturdy that they are still frequently available on collectors' sites. Some are advertised as “still working,” and every last one of them is, without a doubt, soaked in the blood of our ancestors. Dragging a sharp blade along the edge of a can is certain to cause injury sooner or later. So once people got a reliable can shape and a reliable way to get the can open, the search was on for a reliable way to get a can open without the possibility of losing a finger. The answer came in 1925, from the Star Can Opener Company of San Francisco. This is probably the first can opener that resembles the one people have in their kitchens today. Instead of using a blade to pry open a metal can, buyers could clamp the edge of the can between two wheels and twist the handle of one of the wheels to move the blade around the lip. The Star can openers weren't perfect. Compared to the bully beef model, they were flimsy and breakable, but they probably prevented a few injuries. Six short years after the Star model came to market, the first electric can opener was invented. It was patented in 1931 by the Bunker Clancey Company of Kansas City, who had already been sued by the Star Can Opener Company for trying sell a double-wheeled can opener like the Star model (the case was dismissed). The electric can opener must have seemed like the wave of the future and a sure-fire seller, but it proved to be too far ahead of its time. In 1931 not that many households had electricity, and those that did weren't interested in buying can openers. The Bunker Clancey Company was subsequently bought by the Rival Company, which still makes small appliances like can openers today. It took another 25 years for electrically powered can openers to become practical. In the 1950s, Walter Hess Bodle and his daughter, Elizabeth Bodle, developed an electric can opener in the family garage. Walter came up with the opener's blades and motor, and Elizabeth sculpted the outside. Their can opener was a free-standing unit that could sit on the kitchen counter. The Udico brand of the Union Die Casting Company put it on the market in time for Christmas in 1956 and had great success with it. Over the next few years it came out in different styles and colours, and, like the bully beef can opener, has become a collector's item. Also like the bully beef model, Udico can openers often still work. They don't make 'em like they used to. Although there have been some design changes and refinements over the last sixty years, there have yet to be any more leaps forward in can opener technology. If you're resentfully opening a can, you are almost certainly doing it using the Star design, manually forcing the can between two wheels, or the Bodle design, clamping the can into a free-standing electrical opener. Whether or not you enjoy your holiday meals, at least you can be happy that you are not getting poisoned by your own food or cutting open your hand with the blade you use to get at it. That's something, right?The can opener is still a very important and essential item in most kitchens.Can opener, right handed, metal, upper blade section serrated, inscription 'Peerless Pat.Feb 11-90'.Peerless Pat.Feb 11-90flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cannning, can opener, kitchen equipment