Showing 568 items
matching bent
-
Kiewa Valley Historical Society
Ornamental Porcelain Container
Ron White's Collection. Possibly a gift as this type of container was popular.Ron White. See KVHS 1282Round pale green 'pumpkin' shaped porcelain container decorated with 'hand painted?' red, blue, yellow flowers and green leaves. The lip & handle are steel. The lid is pewter with a decorated ring on top. The steel wire handle is vertical then bent to join at the centre. The bends have decoration on their inside.Nilron white' collection, porcelain container -
Flagstaff Hill Maritime Museum and Village
Container - Ink Bottle, from mid-19th century to 1902
This ink bottle is ‘boat’ shaped, which was a common design from the mid-1840s. It was crudely made; maybe it was rejected as a practice bottle or perhaps heat or pressure has distorted it. The bottle was recovered from the wreck of the Inverlochy and is part of the John Chance collection. Ink in the 1700s ink could be purchased in powdered or block form from apothecary shops, to be mixed with water as needed. Then in the mid-1800s chemists began selling ink in liquid form, in small, inexpensive and often attractive bottles. The small glass ink bottles were handmade, blown into a cup shaped mould, and sharply broken off from the blow-pipe at the neck, referred to as the English-made ‘burst-off’ finish. The neck was then filed, filled with liquid ink and sealed with a cork or wax. It was a quick, affordable container and made pen and ink writing available to the public. The name ‘penny ink’ bottles was a common title due to their low cost. INVERLOCHY 1895-1902 - The Inverlochy was a steel sailing barque built in Scotland in 1895 for international trade. In 1902 the Inverlochy left Liverpool under the command of Captain E.R. Kendrick. There were 21 officers and crew and the captain’s wife Mrs Kendrick, on board, bound for Australia with cargo that included tools, chemicals, liquor (beer, whisky, stout, rum, and brandy), steel, iron, wire netting, hoop iron, tinplate and pig iron), and steel wire for the Melbourne Tramway Company, tiles, soap, soft goods and earthenware. On December 18 almost at their destination, the Inverlochy ran aground on Ingoldsby Reef at Point Addis, near Anglesea. The crew and passengers left the ship via lifeboat and landed at Thompson’s Creek, then walked about 20 kilometres to Barwon Heads. Salvagers were interested in the 10 miles of cable in the hold. Mrs Kendrick’s ‘high grade’ bicycle was amongst the items salvaged but she lost her jewellery and two pianos. By February 1903 the ship had broken up and objects such as bottles and casks of liquor were washed ashore. Bad weather shook the wreck in June 1903, causing the ship’s spars and figurehead to be washed ashore. This boat shaped handmade ink bottle is historically significant for its association with communications and record keeping in the mid-to-late 19th century. The bottle is socially significant as an example of making a useful product affordable to every day people. This handmade glass ink bottle is significant for its connection with the John Chance Collection, which is historically significant as an example of artefacts from wrecks that had been lost in the coastal waters of Victoria from thirty to over one hundred years before John Chance and others discovered them. These artefacts are a sample of goods carried as cargo or personal possessions, and of ship hardware of that era. The ink bottle is significant through its connection with the barque, Inverlochy, The Inverlochy is significant for its cargo, which is a snapshot of the array of goods imported into Australia at the turn of the 19th century, including cable for the Melbourne Tramway Company. The Inverlochy is historically significant and is registered on the Victorian Heritage Database, VHR S338. The wreck of the Inverlochy is important as an accessible dive site that shows the remains of a large international trading vessel and its contents. It is valuable for an insight into Victorian era of shipping and maritime history.Ink bottle, thick clear glass, rectangular base with small round mouth, long sides have have a U shaped groove along the shoulders (used for resting pen handles). The outside surface has a white clay-type reside over it. Bottle is very bent and distorted. flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, john chance, inverlochy, scotland, captain e.r. kendrick, melbourne tramway company, tramway cable, ingoldsby reef, point addis, anglesea, thompson’s creek, barwon heads, boat ink bottle, cottage ink, penny ink, glass ink bottle, pen rest, writing accessory, victorian, antique, ink well, sheer lip, distorted body, handmade, mould blown, statoionery -
Sunshine and District Historical Society Incorporated
Registration Plate, SUNSHINE & DISTRICT COMMUNITY HOSPITAL
This brass registration plate was once attached to the former Sunshine District Community Hospital in King Edward Avenue, Albion, 3020. The hospital, under several names, served the local community since the 1920's. It became the Sunshine District Community Hospital in 1946 and was closed in 1989. The building was demolished and replaced by residential units. The plate was preserved by Carol Duvall a long serving nurse, who about 20 years later donated it to the Sunshine and District Historical Society.This brass plate is a rare physical relic of what was once the main hospital serving the Sunshine area, and in which many local babies were born.Tarnished brass plate with indented or carved lettering finished in black paint. The black paint is showing signs of deterioration. The plate has six holes for attaching it to a wall, and two of the corners have been bent probably during the removal of the plate. There is also a small amount of paint contamination on the edges.REGISTERED OFFICE / SUNSHINE DISTRICT COMMUNITY HOSPITALbrass plate, registered office, sunshine district community hospital, king edward avenue -
Bayside Gallery - Bayside City Council Art & Heritage Collection
Photograph - gelatin silver photograph, Official Opening, St Kilda - Brighton Electric Street Railway, 1906
In 1904, at the initiative of Premier Thomas Bent, Victorian Railways was authorised to build an electric street railway from St Kilda to Brighton. The line opened in early 1906 and was one of Melbourne's first electric tram services. On Saturday 5 May, 1906, Premier Thomas Bent performed the opening ceremony of the St Kilda to Brighton electric tramway at the Brighton Terminus, presided over by Cr. Thomas Wilson, Mayor of Brighton, with refreshments following at the Brighton Yacht Club. About 60 representatives were in attendance including the Railway Commissioners and the mayor and councillors of St Kilda, Brighton and Caulfield. The newspapers of the day commented that the cars were the best yet seen in Australia, possessing a great advantage over the Sydney trams, in that they are easily entered, and the glass windbreak was another improvement in design. The tramway from St Kilda to Brighton terminus took 18 minutes, including stops. thomas bent, premier, cr. thomas wilson, mayor, electric railway, electric tram, st kilda, brighton, official opening, public transport -
Ballarat Tramway Museum
Photograph - Pakington St West Geelong, Keith Kings, early 1956
The photo shows trams 40 & 17 passing on the loop in Pakington St at Clarence Sts in West Geelong. Has a "Fishorium" (fish shop), A E Bent Radio, a Grocery shop, Commercial bank, a butcher, and the State Savings Bank of Vic in the photo. Photo undated, Keith Kings late 1955 or early 1956, photo number Q(R)(8)Yields information about the West Geelong shoping centre and tramway operations.Black and white photograph with notes on rear.See rear image and context.trams, tramways, pakington st, geelong, west geelong, tram 40, tram 17 -
Kew Historical Society Inc
Accessory - Cream Silk & Lace Parasol, c.1900
Joseph Butterworth COOMBS (1842-1901), was an accountant who founded a successful mercantile trading company. At the time of his marriage to Caroline Mary MICHEL in 1869, Coombs had already purchased ten acres of Studley Park. The acreage included land on the west of Fenwick Street that extended along lower Stawell Street to the corner of Yarra Street, all of it connected directly to the Yarra environs. A right of way to Studley Park Road was on the title, though Coombs went on to purchase more land, some of which faced Studley Park Road. In addition to owning the Studley Park acreage, Coombs later acquired 1,201 acres of land abutting the Acheron River. While retaining the Kew property he became a Taggerty Councillor and was Shire President for a time. J.B. Coombs died at Acheron Station in 1901 (aged 59 years). A few months after, tenders were called to repair the Kew dwelling, the Fenwick Street property now appearing in records with the name ‘Hope Mansell’. Caroline Coombs remained at Hope Mansell until she died in 1924, survived by three sons and five daughters. Not long after her death, advertisements appeared for the sale of the Studley Park land. The sale seems to have been a mechanism for distribution of the Estate, as the following year the original ten acre holding was transferred to members of the family. The eldest daughter Mabel married William Younger who, with his brother Alexander, developed Younger and Mackie Courts, both south of Studley Park Road. [Research: Kerry Fairbank]In 1961, the granddaughter of Joseph and Caroline Coombs, Mabel Isola (Younger) Grattan, donated ten 19th century dresses and parasols to the Kew Historical Society. The costumes, now known as the 'Coombs Collection', are the earliest recorded items of clothing to enter the Society's collection. Each of the items in the Coombs Collection, of which this item forms a part, is historically, aesthetically and socially significant. As a collection, the costumes includes outstanding examples of morning wear, day dresses, wedding dresses, and clothing accessories, providing evidence of outstanding dressmaker skills in Victoria during the mid to late Victorian period. One of a pair of cream silk parasols, each bordered by overlapping bands of beige lace. The underlying structure and mechanism includes a bent cane handle and black metal expanding spokes. The lace borders are layered to create an overlapping fringe. The high-domed umbrellas may have been created for a bridal party."Coombs Collection"coombs collection, clothing accessories, parasols -
Mission to Seafarers Victoria
legal record (item) - Register, Register II Missions to Seamen Port Melbourne, Circa 1945
The register documents twenty-one weddings that took place in the Mission to Seamen's church district between the 22nd of June, 1945 to the 1st of December 1962. Each certificate is a record of all the information needed to legalise a marriage under Commonwealth law, such as names, dates of birth, marital status, parents and employment. Within the register, there are two letters confirming that grooms are bachelors, and one Statutory Declaration signed by a bride, declaring she is a spinster.The register is a historical record of weddings performed at the Mission to Seamen church between 1945 to 1962.Handwritten in black ink on the front cover: REGISTER NO II (underlined) / MISSION TO SEAMEN / PORT MELBOURNE / NO 19 - / 22-6-45 - / (REGISTER NO 1. / 6-4-29 - 19-3-42 IS KEPT AT / CENTRAL).marriage, wedding, 1945-1962, register, marriages, dio-marriages, mission to seafarers, seamen's mission -
National Vietnam Veterans Museum (NVVM)
Photograph, Doughnut Dollies
A black and white photograph of an American Red Cross girl commonly called 'Doughnut Dollies' bu American G.I's talks to a crippled Vietnamese street child. The boy walked on his knees aith the aid of crutches as his legs were permanently bent behind him, yet he was quite a jovial characterphotograph, american red cross, doughnut dollies, gibbons collection catalogue, vietnamese children, american g.i's -
Ballarat Tramway Museum
Functional object - Tramcar door square key, State Electricity Commission of Victoria - Ballarat office, Mid 1930's?
Used by tram crews to secure doors in the open or closed position and to open the used ticket box. Part of the items issued to each traffic crew or maintenance staff to access or lock tramcars.Would have been issued at the time to a driver or conductor with the cap or traffic number of 18Piece of chrome plated steel rod bent at 90 degrees and shaped at longer end to give a square shape for use in external doors on SECV Ballarat Trams - known as a square key. Was used to secure doors in both open and closed positions. Has been stamped 18 on one side at short end.18ballarat, tramcars, equipment, crews, doors, tramways -
Stawell Historical Society Inc
Photograph, Mr Thomas Kinsella and his dog outside his home in Patrick Street Stawell
Portrait - Thomas Kinsella c1895 part shareholder Moonlight and Magdala Mine. Half shareholder Magdala cum Moonlight Mine. Photo taken at back of old Kinsella house in Patrick Street before the brick house was built.Copy of original photo held by family. Mr. Thomas Kinsella seated wearing bowler hat and double breasted jacket over white shirt and tie lighter trousers. Seated in cushioned chair. Black curly haired dog on bent wood chair. Both in front of ivy terrace , showing part of house.stawell -
Ballarat Tramway Museum
Functional object - Tramcar Conductors (Signal) Bell
Recovered by the donor, with approval of the Depot Foreman, from the wreckage in the SEC Ballarat yard from the demolished Tram No. 20 that was involved in a collision on 16/9/1970. One of the support members, near the bell striker has been broken through and the area where it was secured to the roof of the tram at the same end has been bent. This may be the result of the accident. JS - John Stephenson of New York?Demonstrates a conductors communication bell made by or for use on Melbourne tramcars. A reminder of SEC Tram No. 20 which was involved in a major accident in Victoria St on 16/9/1970Brass Conductor Signal or Communication Bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and a screwed bolt for the bell pull part. Has a section of leather bell cord and a leather bell cord hanging piece. Has the initials "JS" cast in both ends that were used to secure the bell to the roof. Has two metal clips used to secure the leather bell cord into position.conductor, bell, trams, ballarat, tram 20, accidents, tramways -
Mont De Lancey
Tool, Slasher, Unknown
Used by Wandin T Sebire.A thick curved forged steel scrub slasher - head only. It has two bent steel clamps to attach a handle, one which is small and is attached by a screw, the other large one is attached by two rivets. It was efficient for clearing thin and dense low-lying scrub or bush where an axe would be too clumsy. tools, agricultural equipment, agricultural tools, slashers, gardening tools -
Orbost & District Historical Society
nails on board, 1885
These nails were made for Walter John Mundy (1868-1944). Often imported nails made for the softer English and North American timbers bent when hammered against the harder colonial woods and so The Mundy family were farmers / settlers in the Snowy River area since c. 1880s. The original Mundy family moved to a land "selection" at Betebolong in the early 1880's from Buchan. It's only over the past century or so that the mass-produced nail has become an inexpensive and common way to join materials. These three iron nails were hand made by an early Orbost settler or blacksmith in the 1880's, using iron, forge and anvil. They are examples of the types of nails used in the 19th century. A rectangular, wooden(athel pine?) board with three hand-made nails glued in fan design to top left corner of section of floorboard. There is a short length of yellow cord attached for hanging. To the right of the nails is hand-written text in black. the nails have irregular shanks and hammer marks on both shanks and heads.right of nails - " Flooring & nails from Walter Mundy's house at Jarrahmond built C.1885. Still in use to this day."mundy-walter hand-made-nails -
Warrnambool and District Historical Society Inc.
Lighter, Holder for tapers & matches for gas lighting
This object was used to light gas burners, lamps, lights etc. The tapers were used to light a burner that was hard to reach. It may also have been used in a church to light candles. This taper and matches holder has no known local significance but is an attractive object and will be useful for display.This is a brass object made in two parts – a rectangular container holding six wax tapers and a squat jar-shaped container for holding matches. The match holder is welded to the taper holder. The tapers are bent or broken in several places. The taper holder has a hinged lid with a brass top. The match holder has an embedded shell-shaped emblem. social history, warrnambool history, metal candle taper -
Warrnambool and District Historical Society Inc.
Watch, Silver, one hand
The initials on this watch are not clear but, even so, no information is available on the original owner, whether the initials are ‘J.T.F.’ or not. The makers, Hunt and Roskell, were a firm of manufacturing and retailing jewellers and silversmiths in England in the 19th century (founded 1843 and taken over by J.W. Benson in 1889 and continuing to trade as Hunt and Roskell Limited until 1965). This watch is suitable for display material only unless some provenance can be establishedThis is a silver watch with an outer casing covering the dial but showing the time in a smaller circular frame. The figures are Roman numerals on the dial and on the outer casing. The second hand is missing and the hour hand is bent. The dial has an inset showing the seconds. The face has black markings on a white background. There is a large ring at the top of the case for attachment to a chain. Back of watch case: ‘J.T.F.’ (?) Inside case: ‘69188’ Back of watch: ‘Examined by Hunt & Roskell, 156 New Bond Street, London’ hunt & roskell, silver watch, warrnambool -
Flagstaff Hill Maritime Museum and Village
Tool - Chisel, 1930-1955's
This chisel was specially modified to be used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This chisel is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This chisel was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Grooving chisel, metal blade and turned wood handle. Round wooden handle has been bent and cut on one side so that it can be used in small difficult areas. This chisel is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, model making tool, chisel, sovereign of the sea, ship model, hobby, ship model tool -
Kiewa Valley Historical Society
Pipe Tobacco Smoking, Mid to late 1900s
Pipe smoking has been in vogue for centuries, and in Australia it was a symbol of the "discerning smoker" such as the landed gentry or men of professional status. This pipe, of the cherrywood style, would have suited the young professional of the mid and late 1900s. It is the type of pipe well suited to the rural backdrop. In the late 1900s, with the health related restrictions placed on public smoking these tobacco pipes were not immune from the legislation, and even though the pipe smoke was not as offensive as cigarette smoke it still came under the umbrella of smoking. Pipes were also used in the process of inhaling illicit drugs i.e. marijuana, but this use was limited to a very few. Smoking in the second millennium is being phased out as a social habit in Australia but may affect the few "private" smoker and has, as the United States prohibition era (alcoholic drinks) did, spawn an illicit trade in cheap contraband tobacco.This type of pipe lends itself well to the rural setting of the Kiewa Valley and although it is a bit bulky in shape its wooden barrel blends into the environment. The Kiewa Valley region was up until the late 1900s part of the Australian Tobacco Industry and the levels of men smoking pipes was enhanced by the readily supply of, "off the fields", tobacco leaves.This pipe has a bent stem and its style is cherrywood. The pipe has a permanent filter and a narrow tin band. The bowl is well pronounced (curved both top and bottom). The stem screws into the bowl , mid way up the bowl (similar to KVHS 0424 and KVHS.0425) and the stem is also made from bakelite (dark brown in colour). tobacco, pipe smoking, smoking accessories -
Flagstaff Hill Maritime Museum and Village
Chair
Chair wooden Spindle Back Bent with a pressed foliage pattern to the top rail. The seat also pressed and all supported on four splayed legs with a supporting circular rail. Height 900 mm, Width 470 mm, made from black wood, circa 1880, one of the spindles is broken, bad wood borer damageflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Bendigo Historical Society Inc.
Tool - Harris Collection: Poker (Hand Forged)
Jonathan Harris operated a winery on the banks of the Axe Creek, Axedale in the 1850s. A metal rod one centimetre diameter 61 centimetres long. On one end six centimetres is folded back to form a handle. On the other end 14 centimetres is flattened to a width of two centimetres and half a centimetre thick, the last six centimetres is bent to 90 degrees and has a one centimetre square hole in it. Part of the Harris Collection.harris collection, hand forged poker -
Linton and District Historical Society Inc
Photograph, Helen Christie, née Clarke
Copy of original photograph. Photograph shows an older woman with hair drawn back off face, wearing a hat and a long-sleeved, waisted outfit with front buttoned bodice, lace at throat and striped tie, large round brooch at throat, standing with left arm by her side, right arm bent hand resting on back of a chair."Helen Christie nee Clarke Mrs William Christie of Piggoreet Station".helen christie, helen clarke, mrs william christie, piggoreet station -
Ringwood and District Historical Society
Photograph, Mr. Pett in later life about 1900
Typed below photograph, "Mr. Pett in later life about 1900. An early pioneer of Heathmont. Owned 80 acres south of the intersection of Bedford and Canterbury Roads". Written on backing sheet, "Pett sold his land to Tommy Bent the land speculator". -
Bendigo Military Museum
Plaque - MILITARY PLAQUES, Post 1970
Items belonged to Wayne William Forbes No 3176337 RAE. Refer Cat No 754 for service history also 2586. Part of an extensive collection including his fathers..1) Wooden stained shield shaped plaque with a Rising Sun badge mounted centre. The badge has been bent into a curved shape. .2) Wooden stained shield shaped plaque with a Royal Australian Engineer plaque centre. Under is a gold coloured scroll with 1 Field Squadron Group RAE SVN. At the top is a small brass plaque..2) Presented to SPR W FORBESmilitary history - army, plaques, rae -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Boyle Davis mouth gag used by Dr Lorna Lloyd-Green
This instrument is part of the tonsillectomy set. Mouth gags are used to keep the patient’s mouth open during oral surgery, leaving both hands of the surgeon free to operate. The Boyle Davis mouth gag consists of the Davis gag, a frame that serves to hold the mouth open and the Boyle tongue depressor to hold the tongue down. The tongue depressor comes in several sizes, from pediatric to adult. The instrument is assembled by sliding the tongue blade into the frame. The mouth gag is held in position using the Draffin bipod stand. (Entworld)White metal mouth gag [254.1] and tongue depressor [254.2] set. There are small leather fittings on the ends of each item. The mouth gag is roughly horseshoe shaped and attached to a metal support with a small lever, which also allows the tongue depressor to be attached and withdrawn. The tongue depressor is a straight metal blade which is bent and curved at either end. -
Parks Victoria - Days Mill and Farm
Functional object - Lid
Unknown. Possibly lid of water tank?Handmade remodelled lid, enamelled, cream colour, circular. Shape possibly cut with tin snips. Underside has 2 braces in cross shape riveted to lid. Braces bent down at edges of lid (possibly to fit on base?). Upper side, has lids, 1 toward top and 1 at bottom. Central metal piece with handle riveted to lid."MOBIL OIL AUSTRALIA"/ "USE ONLY/ Rheem/ RHEEM SPANNER" -
Expression Australia
Booklet, Proposed Farm and Home for Aged Infirm and Feeble Minded Deaf Mutes
The Premier of Victoria, the Hon, Thomas Bent, has promised a grant of 2,000 pounds towards providing a Training farm for Feeble-minded, and home for Aged and infirm Deaf Mutes, conditionally that a further sum of 2,000 pounds be raised for the same purpose at once. The Committee of the Adult Deaf and Dumb Mission of Victoria having accepted this generous offer of the Government, produced this booklet with the desire to bring the scheme under the notice of the public with a view of appealing to it for the sum named.This booklet is significant as it marks the beginning of a major project, Lake Farm, Blackburn that sought to provide employment and residential facilities for aged and infirm Deaf adults in Victoria in the early years of the 20th Century.Size 13.5cmHx21.5cmW; 16 pagesdeaf, blackburn, thomas bent,ernest j. d. abraham, south australian farm and home for infirm deaf mutes, -
Whitehorse Historical Society Inc.
Print - Article, Carving up the Eastern Suburbs, 8/11/1972 12:00:00 AM
Photocopy of book review of Michael Cannon's 'Land Boom and Bust' describing the work of land speculators in the 1880's.Photocopy of book review of Michael Cannon's 'Land Boom and Bust' describing the work of land speculators in the 1880's. The involvement of senior politicians is discussed. Sir Matthew Davies and the Freehold Investment Company in Blackburn and the sale of the Blackburn Park Estate is mentioned. A copy of a Queen's Park, Box Hill 10 pound deposit receipt is illustrated.Photocopy of book review of Michael Cannon's 'Land Boom and Bust' describing the work of land speculators in the 1880's. davies, matthew henry, sir, bent, thomas, benjamin, freehold investment and banking company of australia ltd., blackburn and tunstall property co., queens park estate, box hill, residential development -
Tramway Heritage Centre
Photograph Album (part of), Ray Pearson's Photo Album - Trams of Victorian Railways, Ballarat, Bendigo, Geelong
Page 10 of Ray Pearson's Photo Album. Brown card page with four photographs (landscape format) placed on page using metallic look and black decorative photo corners. The photographs depict the driving of the first spike into tracks on the St Kilda electric railway, and trams. Hand written inscriptions are located between the top and bottom photographs and under the bottom left photograph.Hand written inscription in white-out or white pen between top and bottom photograph: COUNCILLOR T. BENT DRIVING 1ST SPIKE ON ST KILDA ELECTRIC RLY Hand written inscription in biro at base of page beneath bottom left photograph: NO 1melbourne tramways, councillor t bent, st kilda electric railway, historic tramways event -
Flagstaff Hill Maritime Museum and Village
Domestic object - Spoon, c.1878
This tea spoon is from the wreck of the LOCH ARD, a Loch Line ship of 1,693 tons which sailed from Gravesend, London, on 2 March 1878 with 17 passengers and a crew of 36 under Captain George Gibbs. “The intention was to discharge cargo in Melbourne, before returning to London via the Horn with wool and wheat”. Instead, on 1 June 1878, after 90 days at sea, she struck the sandstone cliffs of Mutton Bird Island on the south west coast of Victoria, and sank with the loss of 52 lives and all her cargo. The manifest of the LOCH ARD listed an array of manufactured goods and bulk metals being exported to the Colony of Victoria, with a declared value of £53,700. (202 bills of lading show an actual invoice value of £68, 456, with insurance underwriting to £30,000 of all cargo). Included in the manifest is the item of “Tin hardware & cutlery £7,530”. This teaspoon is one of 482 similar items of electro-plated cutlery from the LOCH ARD site, comprising spoons and forks of various sizes but all sharing the same general shape or design and metallic composition. 49 of these pieces display a legible makers’ mark — the initials “W” and “P” placed within a raised diamond outline, which is in turn contained within a sunken crown shape — identifying the manufacturer as William Page & Co of Birmingham. An electroplater’s makers’ marks, unlike sterling silver hallmarks, are not consistent identifiers of quality or date and place of manufacture. A similar line of five impressions was usually made to impress the consumer with an implication of industry standards, but what each one actually signified was not regulated and so they varied according to the whim of the individual foundry. In this case, the maker’s marks are often obscured by sedimentary accretion or removed by corrosion after a century of submersion in the ocean. However sufficient detail has survived to indicate that these samples of electro-plated cutlery probably originated from the same consignment in the LOCH ARD’s cargo. The following descriptions of maker’s marks are drawn from 255 tea spoons, 125 dessert spoons, and 99 table forks. These marks are clearly visible in 66 instances, while the same sequence of general outlines, or depression shapes, is discernible in another 166 examples. 1. A recessed Crown containing a raised Diamond outline and the initials “W” and “P” (the recognised trademark of William Page & Co) 2. An impressed Ellipse containing a raised, pivoted, Triangle in its lower part and bearing a Resurrection Cross on its upper section (a possible dissenting church symbol reflecting religious affiliation); OR a rounded Square impression containing a raised, ‘lazy’, letter “B” (possibly mimicking sterling silver hallmark signifying city of manufacture i.e. Birmingham) 3. An impressed rounded Square filled with a raised Maltese Cross (the base metal composite of nickel silver was also known as ‘German silver’ after its Berlin inventors in 1823) 4. A recessed Circle containing a Crab or Scarab Beetle image; OR a recessed Circle containing a rotated ‘fleur de lys’ or ‘fasces’ design 5. A depressed Diamond shape enclosing a large raised letter “R” and a small raised letter “D” (mimicking the U.K. Patent Office stamp which abbreviated the term ‘registered’ to “RD”, but also included date and class of patent) Suggested trade names for William Page & Co’s particular blend of brass plating are ‘roman silver’ or ‘silverite’. This copper alloy polishes to a lustrous gold when new, discolouring to a murky grey with greenish hue when neglected. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only seven in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register most valuable. The LOCH ARD shipwreck is of State significance – Victorian Heritage Register S 417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Unrestored teaspoon from the wreck of the Loch Ard. 65% of original plate remaining, with 10% encrustation on handle of spoon. Layer of copper alloy (brass) electroplated onto nickel-silver base metal. Design incorporates fiddle-back handle, thin stem, flared collar, and elongated bowl. Exposed surface of spoon covered by dull silt-grey film and the bowl is bent. flagstaff hill maritime museum, shipwreck coast, great ocean road, loch line, loch ard, mutton bird island, loch ard gorge, electroplated cutlery, loch ard shipwreck, nickel silver, william page & co, birmingham brass plating, makers marks, teaspoon, william page & co -
Flagstaff Hill Maritime Museum and Village
Spoon, circa 1878
This tea spoon is from the wreck of the LOCH ARD, a Loch Line ship of 1,693 tons which sailed from Gravesend, London, on 2 March 1878 with 17 passengers and a crew of 36 under Captain George Gibbs. “The intention was to discharge cargo in Melbourne, before returning to London via the Horn with wool and wheat”. Instead, on 1 June 1878, after 90 days at sea, she struck the sandstone cliffs of Mutton Bird Island on the south west coast of Victoria, and sank with the loss of 52 lives and all her cargo. The manifest of the LOCH ARD listed an array of manufactured goods and bulk metals being exported to the Colony of Victoria, with a declared value of £53,700. (202 bills of lading show an actual invoice value of £68, 456, with insurance underwriting to £30,000 of all cargo). Included in the manifest is the item of “Tin hardware & cutlery £7,530”. This teaspoon is one of 482 similar items of electro-plated cutlery from the LOCH ARD site, comprising spoons and forks of various sizes but all sharing the same general shape or design and metallic composition. 49 of these pieces display a legible makers’ mark — the initials “W” and “P” placed within a raised diamond outline, which is in turn contained within a sunken crown shape — identifying the manufacturer as William Page & Co of Birmingham. An electroplater’s makers’ marks, unlike sterling silver hallmarks, are not consistent identifiers of quality or date and place of manufacture. A similar line of five impressions was usually made to impress the consumer with an implication of industry standards, but what each one actually signified was not regulated and so they varied according to the whim of the individual foundry. In this case, the maker’s marks are often obscured by sedimentary accretion or removed by corrosion after a century of submersion in the ocean. However sufficient detail has survived to indicate that these samples of electro-plated cutlery probably originated from the same consignment in the LOCH ARD’s cargo. The following descriptions of maker’s marks are drawn from 255 tea spoons, 125 dessert spoons, and 99 table forks. These marks are clearly visible in 66 instances, while the same sequence of general outlines, or depression shapes, is discernible in another 166 examples. 1. A recessed Crown containing a raised Diamond outline and the initials “W” and “P” (the recognised trademark of William Page & Co) 2. An impressed Ellipse containing a raised, pivoted, Triangle in its lower part and bearing a Resurrection Cross on its upper section (a possible dissenting church symbol reflecting religious affiliation); OR a rounded Square impression containing a raised, ‘lazy’, letter “B” (possibly mimicking sterling silver hallmark signifying city of manufacture i.e. Birmingham) 3. An impressed rounded Square filled with a raised Maltese Cross (the base metal composite of nickel silver was also known as ‘German silver’ after its Berlin inventors in 1823) 4. A recessed Circle containing a Crab or Scarab Beetle image; OR a recessed Circle containing a rotated ‘fleur de lys’ or ‘fasces’ design 5. A depressed Diamond shape enclosing a large raised letter “R” and a small raised letter “D” (mimicking the U.K. Patent Office stamp which abbreviated the term ‘registered’ to “RD”, but also included date and class of patent) Suggested trade names for William Page & Co’s particular blend of brass plating are ‘roman silver’ or ‘silverite’. This copper alloy polishes to a lustrous gold when new, discolouring to a murky grey with greenish hue when neglected. HISTORY OF THE LOCH ARD The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only seven in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. The LOCH ARD shipwreck is of State significance – Victorian Heritage Register S 417. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Unrestored tea spoon from the wreck of the LOCH ARD. The spoon design has a flattened fiddle-back handle, with a thin stem or shank, flared collar, and elongated bowl. The spoons metallic composition is a thin layer of brass alloy which has partially corroded back to a nickel-silver base metal. Stem is bent and 60% of spoon surface is concreted with sediment.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, electroplated cutlery, loch ard shipwreck, nickel silver, william page & co, birmingham, brass plating, makers marks -
Warrnambool and District Historical Society Inc.
Domestic object - Pencil, 19th Century
This pencil was found in 1946 by Mr Jim Pelling when an old wall was being pulled down in Warrnambool. This type of pen would have been used in the 19th century and apparently produced good legible writing and the lead point never wore out. No information is available on Jim Pelling or the location of the wall.Although this pencil has no known provenance it is of considerable interest because of its finding in an old wall in Warrnambool and because of its antiquarian value. It is a good example of a writing tool of the past and the ivory handle is of particular interest. This is a pencil with a handle made of ivory with a sharpened point of metallic lead screwed on the end of it. The end of the handle has an ornamental column shape. The lead at the end is slightly bent. Accompanying the pencil is an extract from a 1946 Warrnambool Standard detailing the finding of the pencil and some handwriting from a later date. The newspaper extract is pasted on to a piece of cardboard (a piece of a Rice Bubbles packet).In blue handwriting: ‘Extract from 1946 Warrnambool Standard’ and ‘Given to Warrnambool Historical Society by Mr J. Pelling 1970’jim pelling, metallic lead pencil, warrnambool history