21cm x 14.5cm black and white photograph of the bullock team in front of Thomas Phillip's Forge, Mrs Crossley's house, Dunrobin Castle owned by Mr & Mrs King. The bullock team is hauling cargo on a wagon stored in hessian sacks. The photograph is mounted on board. Written on the back: 110/12 Bullock Team Thomas Phillips Shoeing, Mrs Crosley, & Mrs Kings Dunrobin Castle. Chapter 4bullocks, forges, blacksmiths, cargo, transport

Used in the 19th century.A curved wooden handled adze with a forged steel head which has a wide cutting blade and a small 5cm steel knob on top. It was used by woodworkers for cutting and trimming rough wooden planks and shaping ans smoothing wooden surfaces in the late 19th century.woodworking tools, wood, steel, froes, cleaving axes, axes, cutting tools, hand axes, adzes

Reproduction Model Mining Cage. This item is constructed of wrought and forged flat iron. It clearly displays how the breaking mechanism of a mining cage is created so that if the tension is released from the support cables , the cage 'locks' on to the side rail (Skid). (see Research Tab)gold mining, miners' safety cage

18cm x 12.5cm black and white photograph of the buildings at 67 and 69 Sydney Street. Pictured is Cuts 'n' Curls, Ye Olde Blacksmith Shoppe and a Milk Bar. The forge is housed in a scrappy looking building with mis-matching corrugated iron roofing and rendered walls. storefronts, shopfronts, retail stores, hair salons, hair dressers, forges, milk bars, blacksmiths

This cut-throat razor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Cut-throat razor, part of the W.R. Angus Collection. Razor model No. 42, steel blade, in dark cardboard box, with bone handle, arrow shaped end; blade swings inside the handle. Razor made in Germany with blade made in Sheffield, England, in early 1900’s.Embossed on box "No. 42 / DES GERMAN MANUFACTURE", on handle "GOTTA", on blade "HAMBURG RING / REG. GOTTA REG. / SUPER FINE" and "FINEST SHEFFIELD STEEL / FORGED AND - - - HOLLOW / GROUND IN GERMANY" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, cut-throat razor, gotta razor, german made razor, personal effects 1900's, grooming equipment 1900's

Robert Charlton conducted a blacksmith, wheelwright and farrier business on the corner of Evans and Station Street, Sunbury from 1918 to 1940. The copy was taken from a photograph displayed in Mick Walsh's garage which is now on the above site.A black and white photograph of two sheds. A weatherboard shed with corrugated iron roof is on the LHS and the corrugated iron building is the blacksmith's forge and wheelwright's workshop. Two men are standing in fron of the large doorway. An advertisement for Dr. Morse's Indian Root Pills is written across the roof and 'BLACKSMITH' is painted on the wall.blacksmiths, wheelwrights, coach builders, advertising, charlton, robert w., walsh, mick, petrol station, station street, evans street, sunbury, george evans collection

A small forged steel combined hoe and rake head hand cultivator tool. It has one flattened hoe shaped edge at one end and at the opposite, three rake prongs, and there is an extension on the head for the wooden handle to be attached. It could have been used in small areas such as a garden in the 19th century..agricultural tools, tools, rakes, gardening tools, hand tools, hoes

Found at 'Mulvra', a property near Linton belonging to Digory Pendray Roberts. It is believed that the candle-holder was forged in the blacksmith's workshop at the property. Found in the late 1940s and donated to Linton & District Historical Society by Lyle Fletcher, a descendant of Digory Roberts.Iron candle holder, round section to hold candle, with horizontal spike attached, to enable candle holder to be pushed into rocks or clay of mine wall.mining, candle holders

Used in the 19th Century'THE ANDYO' registered Hedgehog Tool. A forged steel head of a general purpose hoe with one side of the blade used as a hoe and the other pointed side possibly used to dig small furrows. It was made by Cornelius Whitehouse & Sons at Cannock Edge Tool Works - Branded Whitehouse & Sons. It was used in the 19th century.'THE ANDYO' is stamped on the pointed blade. On the hoe blade is stamped - Whitehouse & Sons CANNOCK. 'TY GWYN. agricultural tools, hoes, gardening tools, gardening hoes, steel

Showing the participates of the Discipline March at the State Championships held at Swanhill in 1974. All the marchers were members of the Wangaratta Urban Fire Brigade. Steven Brown is the son of Les Brown. Les Brown passed away in 2011. Peter Graham and Tom Philp went on to be long serving members of the Brigade. John Briese also was a long serving member who moved to Melbourne around 1995. A black and white photograph of the Marching Team at Swanhill Championships 1974.Left to Right: Ian Moscrop, Tom Philp, John Spence, Peter Graham, Steven Brown, Les Brown, John Plecter, G Robinson, Bill Forge. Leader: John Briese Swanhill 1974photograph, marching team, swanhill

Used in the 19th century.A forged steel broadaxe head without a handle - it has a hole for the handle. It can be known also as a trimming axe blade or a long bearded axe because of its beard shape. It was commonly used in manufacture of square timbers for wooden shipbuilding, log building, timber framing and railroad ties. It was used in the 19th century.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, broadaxes, felling axes, hewing axes, axe heads, tool components

Used in the 19th century.A forged steel unusual long winged axe head blade without a handle - it has a hole for the handle. Originally it was "Japanned" finished' with black baked enamel which is now peeling off. There is a indented small zigzag pattern on the head where it would meet the handle. It was used in the 19th century possibly as a trimming axe.Whitehouse and Sons Cannock Warrantedwoodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, broadaxes, felling axes, hewing axes, axe heads, tool components

Used by Wandin T Sebire.A thick curved forged steel scrub slasher - head only. It has two bent steel clamps to attach a handle, one which is small and is attached by a screw, the other large one is attached by two rivets. It was efficient for clearing thin and dense low-lying scrub or bush where an axe would be too clumsy. tools, agricultural equipment, agricultural tools, slashers, gardening tools

Historical Information: The anchor is from the wooden sailing ship CHILDREN, which was wrecked at Childers Cove east of Warrnambool on the 15th of January 1839 with the loss of 16 lives. The Children anchor was raised from the wreck site by Flagstaff Hill Divers; Peter Ronald, Garry Hayden (Terang, still), Tim Goodall (now Warrnambool), and Colin Goodall (now Warrnambool), on Sunday 3rd January 1974. A week or so later it was dragged up the cliffs and taken to Warrnambool. It is now on display near the entrance to the Maritime Village and Museum. It appears to be a Pering’s Improved Anchor, developed at Portsmouth after 1813. The addition of broad curvature to the anchor arms provided a stronger purchase than the pre-existing Admiralty Old Pattern Long Shanked Anchor with straight arms. However, the evidence of hammer-welding the separate pieces of the arms and palms to the central shank (peaked crown and flat palms) suggests the manufacture is before the 1831 Rodger’s Anchor design, (which cast both arms and their flukes as one piece that was then attached to the shank by a bolt through the crown). This identification seems consistent with the date of the CHILDREN’s construction in 1824. The CHILDREN was a three masted barque with a wooden hull built at Liverpool in England. She was bought by the Henty family of Portland (Australia Felix) in 1837 for regular coastal trading between Van Diemens Land, the Port Phillip District of New South Wales and South Australia. Only 255 tons burden (92 feet in length, with a beam of 25 feet and depth of 17 feet), she sailed from Launceston bound for Adelaide in late December1838, on her first Australian voyage and under the English master who had brought her out – Captain H. Browne. On board the CHILDREN were 24 passengers, including 9 children; the captain and 14 crew; livestock of 1500 sheep, 8 bullocks and 7 horses; general cargo of beef, pork, tobacco, tripe, butter, limejuice, horse hair, currants, lead shot, beer and spirits; 5,000 house bricks from London; and six whaling boats with associated whaling gear. The vessel was battered by gale force north-westerly winds shortly after setting out from Launceston on 11 January 1839 and adverse sailing conditions persisted for the next four days. At 11 pm on the 15th of January 1839, and many miles north and east of the captain’s navigated position, the CHILDREN struck the Pinnacle, a limestone stack off Childers Cove. Within half an hour the ship was completely destroyed. As well as the loss of livestock and cargo, 16 passengers and crew perished, including the captain, six men, one woman and eight children. In 1931 shifting sands at Childers Cove uncovered the skeleton of an adult male. In 1951 another two skeletons were exposed by storms, an adult male and a child. In 1963 some district scuba divers retrieved a small signal-cannon from the site. And in 1974 Flagstaff Hill recovered the anchor and some house bricks. The shipwreck of the CHILDREN is of state significance – Victorian Heritage Register No. S116.A large forged-wrought iron anchor from the wreck of the CHILDREN. Flat hammer-welded flukes on opposing curved arms and a peaked crown. It has a metal (elbowed) stock or cross-bar and a heavy duty pinned shackle (not ring) for the anchor chain. It is in fair condition but extensively corroded after 135 years on seabed (supported on display) .warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, the children, childers cove, anchor, pering’s improved anchor, 1839 shipwreck.

This photograph of Lillie and Olive Duncan is one of a number featuring the sisters. They were active members of the Ladies' Harbour Lights Guild during the 1920s and 1930s and the objects we have relating to the women highlight the relationships forged between seafarers and those who offered their time and energy to the Mission.The Ladies' Harbour Lights Guild was instrumental in raising the necessary funds for the construction of the current Mission to Seafarers building. They also worked to provide the tangible elements of seafarers' welfare, such as procuring donations of goods and money. However, their most important work, in many ways, was to provide company, conversation and support to seafarers. Lillie, Olive and their entire family were involved with the Mission over an extended period of time.Black and white photograph of Lillie Romana Duncan and Olive Harriet Duncan. Olive is on the left wearing a dark coloured dress with a 'V' neck, little coloured coat and gloves, carrying a clutch under her arm and wearing a dark hat. Olive (on the right) is wearing a ladies' suit and gloves, carrying a clutch under her arm, wearing a dark coloured hat and a brooch at her neck. The photograph has been turned into a postcard, complete with printed postcard division on reverse.In pencil on reverse: Lillie Morgan/Olive Hall/RHS/(DUNCAN) Printed: POST CARD/CORRESPONDENCE/ADDRESS

This type of wrench was called an adjustable twisted steel monkey wrench and was made around 1900. It was different from ordinary spanners and wrenches by the nature of the jaws being able to adjust to fit an individual nut, bolt or other fitting. The twisted handle wrenches were often forged by handtwist design on handle; jaws bent out of shape and worn. Hand-madechurchill island, tool, adjustable wrench, hand tool

Mortlake Rd./Montgomery St., Lake Bolac, 1912. Looking northwards. Image shows the broad expanse of the grass verge and road (top left) with Josiah Park's forge and smithy, the pub and the store, with peppercorn trees planted along the street. On the right the public hall can be faintly seen.lake bolac, montgomery st., 1912.

Windlass, an ISO accredited sword maker and official supplier to MOD UK and the RN.good example of Navy cutlass swords2 x British Naval Cutlass 1804 - Chromed These highest quality blades are manufactured by Windlass, an ISO accredited sword maker and official supplier to MOD UK and the RN. Each blade is fold forged from a single billet of high-carbon steel, then hardened and tempered. Hand assembled and ground, each is then fully chrome plated for a mirror finish. 1. Blade near the hilt has on one side crossed sword and scabbard, obverse has a J. On the basket are N an arrow WD followed by an L. 2. Blade near the hilt has on one side crossed sword and scabbard, obverse has a inscribed 9 and stamped C6. On the basket are N an arrow WD followed by an L.navy, cutlass

The St Peter chapel was furnished thanks to donations of supporters of the Mission. Some were donated for the previous temporary chapel at the Sidney Street site and some are lost. - Holy Table (altar): donated by Mrs Shuter, in Memoriam of Charles Shuter - Cross: - Vases (lost) - Stained Glass Windows: donated by Misses Edith and Ruby Forge, in Memoriam J. Leslie Forge - Altar Lectern - Alms Dish: donated by the Godfrey sisters in Memoriam of their parents - Credence Table: donated by - Sanctuary Chairs: donated by Miss Gladys Hawkey - Sanctuary Rail - Choir Stalls and Chancel Screen - Lectern (donated in 1909) - Pulpit (donated in 1907) - Prayer Desk (a plaque to Goldsmith) - Bible and Prayer Books - Font - Cover for Font - Pews - Offertory Collection Plates (lost) - Music Cupboard in Vestry (lost) The document lists all the gifts donated by generous supporters of the Mission in 1917. The chapel was built during World War 1 as. memorial to the merchant seamen lost during the war. These items are still in the chapel today.A4 document on cream colour paper, wording in black ink.gifts, chapel of st peter, flinders street, mission to seafarers, mission to seamen, gladys amy hawkey (1886-1974), reverend alfred gurney goldsmith, gifts-1917, amelia shuter nee lord, beatrice elizabeth higgins (nee shuter), charles shuter

From a Melbourne Cable Car Trailer, built by the Melbourne Tramway and Omnibus Co. circa 1885. It is cast in 2 halves and then the 2 pieces forged together. It is a poor example due to a poor sand system employed. Lack of wear markings suggests this item had not been extensively used or subject to extensive wear.Example of cable car suspension componentsCast item, two halves welded together and painted.ballarat, ballarat tramways, cable car, horse tram

Fire screens were developed early in the 19th century to prevent sparks from flying into the room or logs rolling out when a fire was left unattended. They also served as ornamental or decorative items, particularly ones such as this fire screen made from beaten or forged copper. Their decorations often depicted rural scenes.This item is representative of fire screens used in Australian homes to protect them from fire during the 19th and early 20th century when open fires were the main form of household heating.A fire screen made from beaten copper with a wooden frame. The screen design depicts a group of people sitting outside an Elizabethan building with a dog in the foreground and trees either side. The building is possibly a tavern as the people are seated on barrels. The frame is made from wood and has wrought iron legs screwed in place on either side and a handle attached at the centre top edge.forged copper, fire screens, decorative household items

These whale harpoons belonged to Arthur Ashby. The longer one was his personal hand-forged harpoon. Arthur Ashby was a harpoonist written about in the book, "Killers of Eden". They were handed down to his son, Norman Ashby who gave them to the donor's father for safe-keeping as he did not have a permanent residence. Two harpoons. .1 is a hand held iron harpoon. It is very long with an open neck at one end and a large blade at the other. .2 is smaller and was used in harpoon guns. It is made of brass with a pointed end.whaling harpoons ashby-arthur maritime-technology

Used in the 19th century.A forged steel long narrow sharp bladed felling axe head without a handle - it has a hole for the handle. It was commonly used to chop down trees as it has a more elongated and rigid blade excellent for deep gouging cuts.The length of the handle, weight of the head and angle of the blade all play a role in just how deep it cuts. It was use din the 19th Century.There is a small grooved pattern on the head where the handle would attach. A circular indentation is evident.woodworking tools, steel, froes, cleaving axes, axes, cutting tools, hand axes, felling axes, axe heads, tool components,

10.00AM - Received call to prepare and proceed to S. S. Time aground on Corsair Rock with other members of salvage party. Took taxi home to pick up warm clothing and gear returning at once to Fleet Forge works. Arrangements made to board tug Eagle at 5 North Wharf at 1.30PM with diving gear and salvage pumps.Scale model of SS timess time, wrecks, port phillip, corsair rock, model ship

The scales were made by Harrison (Birmingham), founded 1898, which went on to become Harrison Drape. Balance scales for full and half sovereigns also measured the circumference and the thickness. As gold is one of the heaviest metals one way to forge a sovereign in brass would be to make it slightly larger to make up the weight. This clever invention put a stop to that.An item from an outstanding and diverse collection of photographs, postcards and artefacts, assembled by members of the Christian and Washfold families of Kew. Harrison Brass Sovereign Rocker Coin Scale in original leather container. The balance scale for full and half sovereigns also measured the circumference and the thickness. It was made from the 1850s to the early 1900s. Scales in perfect condition.cairn scales, sovereign rocker scale, christian-washfold collection

When the German Government imposed ID cards on the Dutch population they employed the collaborator and expert designer Jacob Lentz who claimed they were impossible to forge. The Jewish ones showed a black J on both front and back. However, a Jewish woman living in the Netherlands, Alice Cohn, did learn how to replicate them and thus saved numerous Jewish lives.These items are significant insofar as all Dutch citizens over the age of 15 were obliged to carry ID on their persons at all times.Proof of Identity cards issued by the Dutch Government under orders of the German occupying forces. Inside each folder are the owner's full name; DOB; address; occupation; fingerprints and Date of Issue.a) Photograph and signature of male - J.W.W. v. Alphen. Stamp: Gemeente (Municipality) Rotterdam. Inside cover: R29 No.487892. DOB: Sept.20 1890. b) Photograph and signature of female - H. v. Alphen. Stamp: Gemeente (Municipality) 's-Gravenhage. Inside cover: G41 No.003830. DOB: 12 July, 1920.

James Reid was born in Scotland near Glasgow and came to Victoria as a young man in 1854. Shortly after arriving he came to Bacchus Marsh where he lived until his death in 1902 at the age of 74 years. For most of these years he conducted a wheelwrights and coach builders business in Bacchus Marsh. In the nineteenth and early twentieth centuries, wheelwrights and blacksmiths played an essential role in the functioning of the whole community. Before the industrialisation of manufacturing, wheels and other components of vehicles for transport, all metal objects, including farm implements, building requirements and domestic utensils were made by hand. As mechanisation of industry increased, the smith commonly performed the role of farrier in the times when horse power was pivotal to all aspects of society. Complementing this work, the forge was often allied with a wheelwright's shop. These premises also acted as a meeting place for the men of the town, where news was shared and friendships forged.Small sepia 'carte de viste' style unframed photograph on card with gold border framing photograph. Housed in the album, 'Photographs of Bacchus Marsh and District in 1883 by Stevenson and McNicoll'. An image depicting a wheelwright and blacksmith's shop, with a group of men, boys and a woman shown in front. Two men are wearing the work clothes of the blacksmith, including the split leather apron worn by farriers to enable them to work on the hooves of the horses needing shoeing. Two young boys are standing by the door. A portly gentleman in formal clothes stands before the shop. The house shown at the rear was James Reid's residence. Two people, an elderly gentleman and a younger woman, are seated in a jinker on the road to the side of the shop. A collection of wheels and farm tools leans on the walls. A triple-tiered sign above the shop reads: JAMES REID WHEELWRIGHT BLACKSMITH. TIMBER - YARD PAINTS, OILS & GLASS.Printed On the front: Stevenson & McNicoll. Photo. 108 Elizabeth St. Melbourne. COPIES CAN BE OBTAINED AT ANY TIME. On the back: LIGHT & TRUTH inscribed on a banner surmounted by a representation of the rising sun. Copies of this Portrait can be had at any time by sending the Name and Post Office Money Order or Stamps for the amount of order to STEVENSON & McNICOLL LATE BENSON & STEVENSON, Photographers. 108 Elizabeth Street, MELBOURNE.wheelwrights, james reid 1828?-1902, stevenson and mcnicoll 1883 photographs of bacchus marsh and district

Has a strong association with tram crews, possibly inspector (Dave Kellett?) in Ballarat, would have been issued to crews in order operate the tram car doors. Normally a L shaped key.T shaped steel piece, with a round top piece or handle with a rod that has been forged at the lower end to give a tapered square shape for use possibly in external doors on SECV Ballarat Trams - known as a square key. Was used to secure doors in both open and closed positions. Was probably chrome plated at the time of manufacture. .1 - square key fashioned from rod and welded at the top.trams, tramways, tramcars, doors, locks, security