Used by ESCo to enable identification of depot employees when travelling on the trams. Date made and when used unknown. Has hammer marks on rear of badge. See item 9038 for another example.Demonstrates a employee's free pass for travelling on Ballarat's trams.Handmade metal badge from brass sheet about 52 in diameter with a slot (long oval shape) about 23 long x 5 deep through which a leather strap about 100 long x 10 wide with a steel buckle is fitted. Stamped in capital letters on the badge are "BALLARAT TRAMWAYS" on the outside, "EMPLOYEES DEPOT PASS", in the centre of the badge, with the word "Employees" in a semi-circle. Near the bottom of the badge is the number "12", the one formed using an "I". The letters have been filled with a white paint.tramways, trams, esco, depot, employees pass, badges

Used in the late 19th century.A steel bladed wooden curved handled Shingle Splitter sometimes called a Paling Knife used for splitting or cleaving timber. It has two crossed hammer shape symbols stamped at the beginning and end of the inscription - Wolpin Wedge Mills. It was used in the late 19th century.Wolpin Wedge Millssteel, wood, froes, cleaving axes, axes, cutting tools, hand axes, woodworking tools

Black and white photograph contained within Reg. Item 2488, page 55, of two ESCo Depot workers at the rear of the Wendouree Parade building. Has a handwritten caption by H.P. James. Featured in the photo are Alf Coulter and Arthur Thompson. Note Item Not formally Numbered. Image btm2507i2 shows position on page relative to items 2507 to 2512. High Res Images added 15/3/2011.Handwritten in Pencil under the photograph is "I can tell a story here to my liking. This is rear of Blacksmiths shop Tram Depot, Alf Coulter and Arthur Thompson with hammer. Now in the earlier years, the smithy Horse and early electric was against the Gregory St. frontage. I wielded the 12lb hammer to assist the then blacksmith, W. McGeachan? (red hair) 1905. I was sent to the horse trams to act as a temporary conductor but I stayed for some time as conductor, track cleaner and grooms assistant."tramways, trams, esco, blacksmith, depot

It's assumed that this journal was read at the Ballarat School of MinesA small illustrated journal with advertisements and pictures. pages 328-356 (and 26 pages of illustrated advertisements). Illustrations include machinery, corn crushers, condensers, chlorination plants. stea, hammers, steam engines, steam pumps, lamps, saw bench, leather belting, casks, barrels, machinery, boiler, cohran and co, birkenhead, stern, cowles syndicate company, electric smelting works, aluminium manufacturing, w t glover and co, rope machine, steam travelling crane, webster wood fibre machine, automatic govenor expansion gear, international exhibition edinburgh, beacon light, air propeller, well boring tools and pumps, cochran and co.'s launch, tug and boat building yard, s.s. jeanette, cochran boiler, cochran and co's boiler shop, stern wheel steamer, s.s. esperanca, cowles syndicate co, milton, w.t. glover & co.'s patent compound rope making machine, bendh drilling machine, steam launch, bicycle, well-boring tools

Owner of tools Jim Gillespie Clayton VictoriaCaulking iron blacksmith made boot iron, this iron is used for setting down deck seams where they are crossed by a steam or water pipe over the deck. They were also useful in other awkward places e.g. around winches. Driving force either mallet or hammer.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Sepia photograph of about fifty-five girls (School photo?) in front of a brick building. All of them are dressed in the clothes of the era - Frilly dresses, many with pinafores. On the reverse in biro is: Maud Hammer, and almost unreadable:- 'Mrs S Coeby? Cnr. _____Somerville St, Bendigo'person, group, school, school group, maud hammer, mrs. s. coeby?

Small brick cottage a typical example of an early miners cottage located in Curtis Street. Mr. Hammer brickmaker, lived in the cottage. The cottage was also home to Mr. & Mrs. Vic Bullen for many years. Van Diesan later bought the cottage.Black & White photograph of a small brick college with corrugated iron roof. stawell dwelling

Photograph. Black and white photo - "Monument Hill Mine 655'. Int stope below 640' level 150' south of shaft. Picture of south face showing western side of upper roof. On west side is main w fault. On the face is a rock hammer. Details at ? qtz and intrusions above it.photograph, landscape, monument hill mine 655

Series of 8 black and white photographs of the trackwork equipment and tools on the MMTB system. .1 - Hydraulic drain cover lifting device. .2 - rack of jack hammers being lifted - St Kilda Road? .3 - length of rail being lifted by 12 men with MMTB equipment in the background. .4 - Pack of sleepers being lifted with many wood blocks in the background. .5 - pack of 12 jack hammers in their lifting rack. .6 - light weight tool being used to lift a track pit cover by two men. .7 - One man demonstrating the lifting of a 44 gallon drum. .8 - two men rolling a 44 gallon drum off a truck.trams, tramways, trackwork, rails, track materials, track repairs, sleepers, equipment

This metal sphere is part of the wooden barque, the Grange, built in 1840. The sphere was recovered from the shipwreck of the Grange in around 1968, 110 years after the Grange was wrecked (see below for further details on the Grange). It is part of the John Chance Collection. THE GRANGE, 1840-1858- The wooden barque ’Grange’ was a three-masted ship built in Scotland in 1840 for international and coastal trade. On March 22, 1858, the Grange set sail from Melbourne under Captain A. Alexander, carrying a cargo of ballast. The barque had left the Heads of Phillip Bay and was heading west along the Victorian coast towards Cape Otway. The ship struck Little Haley’s Reef at Apollo Bay due to a navigational error and was stuck on the rocks. The crew left the ship carrying whatever they could onto the beach. Eventually, the remains of the hull, sails and fittings were salvaged before the wreck of the Grange broke up about a month later. About 110 years later, in 1968, the wreck of the Grange was found by divers from the Underwater Explorers Club of Victoria. They were amazed to find a unique, six to nine pound carronade (type of small cannon) and a cannonball on the site. There have been no other similar carronades recorded. In that same year the anchor of the Grange was recovered by diver John Chance and Mal Brown. The sphere is significant historically as an example of hardware used when building wooden ships in the early to mid-19th century. The sphere is historically significant as an example of the work and trade of blacksmith. The sphere also has significant as it was recovered by John Chance, a diver from the wreck of the Grange in the 1968. Items that come from several wrecks along Victoria's coast have since been donated to the Flagstaff Hill Maritime Village’s museum collection by his family, illustrating this item’s level of historical value. The sphere is historically significant for its association with the 1840s wooden barque, the Grange. The Grange is an historical example of a Scottish built vessel used for international and coastal trader of both cargo and passengers in the mid-19th century. The Grange is an example of an early ship, designed with a wooden hull. It is significant as a ship still available to divers along the south coast of Victoria, for research and education purposes. The Grange is an example of a mid-19th century vessel that carried a weapon of defence onboard. Sphere; thin hollow copper, various shades of brown, dimpled or hammered surface with a sheen, no joins. Base has a small hole and is fitted with a hollow, cylindrical brass collar. The collar had a rim on top, inward curving sides and a narrower rim on the bottom. The sphere looks similar to a bed post knob.flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, west coast trader, apollo bay, mid-19th century shipwreck, the grange, scottish barque, little henty reef, captain a alexander, underwater explorers club of victoria, 1840s carronade, vhr 5297, coastal trader, wooden shipwreck, john chance, wooden ship, ship fitting, sphere, knob, bed knob, post decoration

Three part object. (1) A Wilson 'Hammer 6.2 Stretch' racquet with handle signed by Lindsay Davenport; and (2) full length cover with zipper. (3) In small pocket of cover is a blank warranty application card. Materials: Graphite, Plastic, Nylon, Adhesive tape, Leather, Paper, Ink, Synthetic materialtennis

A Bick or coopers anvil is a tool used to fabricate the iron hoops that a cooper would produce to hold a barrel together. The hoops are first cut to the required length and then beaten into shape and riveted on the Bick or Tee anvil. They are then driven into place on the barrel with a hammer and iron tipped, wedged shaped driver.The subject Item is used as a tool to produce steel hoops for wooden barrels but at this time cannot be associated with an historical event, person or place, provenance is therefore unknown, item assessed as a collection asset as it is believed to have been produced and used before 1950.Bick Iron or Coopers Anvil, attaches to a removeable wooden base, Metal anvil with pointed end & flat shaped topNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, brick iron, anvil, coopers tools, barrel making, barrels

Also known as a froe (or frow), shake axe or paling knife, this tool is used for cleaving wood by splitting it along the grain. The L-shaped tool is hammered on the top edge of its blade into the end of a piece of wood in the direction of the grain, then twisting the blade in the wood by rotating the haft (handle).Shingle knife or paling splitter Metal knife with short wooden handletimber tools

Used by Ken Cathie in his mechanics workshop.Heavy metal belt-joiner tool painted green with hinged pieces. Inside a brass comb-like piece is attached with three screws. A row of staples is inserted into the comb and a hook slides through to lock in place when repairing a belt. A flat section on the top is hit with a hammer to knit the metal staples together.GEM (on box)allansford, tools, belts, mechanics, ken cathie, gem

A projector designed to display text from a specifically prepared roll-film onto a screen. The indexing frequency of the text lines is variable between 15 x 130 lines per minute. Fan cooled motor. Outer surfaces in grey hammered finish. In grey-finish storage box with removable top half. Nameplate, work speed table Serial No P130256 Model V-45-Pscientific instruments, projector, film strip projector, controlled reader

Metal tool for crimping or pinking, leather, felt, etc, with enclosed note reading, this is Grandma Junipers pinking iron, you put the edge of flannel or felt on a piece of lead & tap with the hammer, makes a nice scallop edge for rugs or anything like edge for mats etc, Grandma used to use it quite a lot.K R Timmins & Sonscottage, miners

A black and white photograph of Gunners, 101 Battery, 1st Field Regimentt, RAA at Fire Support Base Baton using a sledge hammer, pound a steel stake into the ground while another member of the gun crew waits to do the same. The gunners were erecting a cover over their shells. (circa July 1969)photograph, 101 battery, 1st australian field regiment, raa, 1st atf base, nui dat, d445 battalion (nva/vietcong), fire support base baton, gibbons collection catalogue, gunner

The Ballarat Technical Art School building was opened in 1915. It is not known when the stained glass was put into position.Colour digital photograph showing the stained glass at the Ballarat Technical Art School. The mining lamp detail is on the entrance door to the Ballarat School of Mines Technical Art School building. The design features three tools associated with mining, the miners lamp and two hammers. Their is also stained glass on the entrance doors and a window by the entrance.ballarat school of mines, ballarat technical art school, stained glass, miners lamp, entrance

The author, William Morgans, was a lecturer on mining at the Bristol School of Mines. The owner of the book, William Baragwanath, was a former student of the Ballarat School of Mines who held the following positions: Department of Mines (1897-1922); director of the geological survey (1922-24); chief mining surveyor (1924-32); secretary for mines (1932-34); chief mining surveyor (1934-43); consultant to the Department of Mines (1943-50); President, Royal Society of Victoria (1943-44), councillor of the Ballarat School of Mines (1916-50).Hard cover book of 207 pages with buff cloth cover. The books covers materials andf processes used in the manufacture of tools, special uses, qualities and efficiciency. It includes 235 wood engravings of mining tools drawn to scale. Tools include borers, hammers, sledges, picks, shovels, spades, saws, helves and handles.Title page handwritten in ink 'W.B.' [William Baragwanath]mining, tools, ballarat school of mines, geology, bristol school of mines, government geologist, william baragwanath

BHS CollectionBendigo Advertiser ''The way we were'' from 2003. Athletic: Bendigo YMCA boys travelled to Brisbane in April 1947, to compete in basketball, volleyball, athletics and tennis. Back row from left: Charles Gladman, Frank Foster, Ian McDowell, Ian Randell. Front: Bob Burnett and Ernie Hammer. The clip is in a folder.newspaper, bendigo advertiser, the way we were

Kingsley William Allen VX109839 2nd AIF. Refer 2192.4, 2195 for service history also 2193, 2196P.1) Photo, sepia tone, on metal frame, brown colour, plastic coated. Soldier in uniform, no hat. .2) Photo, sepia tone, on metal frame, brown colour, plastic coated. Soldier in uniform with peak hat showing 2x Chevrons and crossed tongs and hammer on sleeves. Same person in both photos being K.W Allen. photography, military, frameing

A yellow programme with black print and a photo of Mademoiselle Antonia Dolores on the front cover. Also on the front cover are the words, ' Bendigo. Direction H. N. Southwell Mademoiselle Antonia Dolores. Mr. Selwyn Shrimplin at the piano Friday, November 25th, 1910. The programme follows. A postcard photo of Mdlle. Antonia Dolores is also included. The photo is by Hammer.program, music, antonia delores, lydia chancellor, collection, ephemera, music, event, mademoiselle antonia dolores, person, individual, concert, entertainment

Fighting pick appears to be from Papua New Guinea. (Tari Fighting Pick ?) Implement is made of wood (appears soft wood handle with hard wood head.) Pick/hammer shaped with head attached to handle by cane binding.Some grooving on rear of the head and small binding at back.Wood colour with some red coloring in the grooves at back of head.

Sepia photograph. Twenty nine mine workers posed in three lines. High stone retaining wall behind. Timber and iron buildings behind. Some men holding tools - blacksmiths with leather aprons holding hammers. One man holding a shovel, one man holding a saw. Inscriptions: on board in front of men 'Lansell's Big 180'person, group, mining

A 6 pages booklet titled "Early Melbourne with short history of No. 1 Melbourne". On top left: "this will be the place for a village" extract from John Batman's diary and a drawing of John Batman. on bottom right a drawing of John Pascoe Fawkner. With the compliments of the Vacuum Oil Company Pty.Ltd. On the back cover in blue pen S. Brown, 27 Hammer Street.melbourne

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.well used, slight surface rust. Octagonal shaft to collar then wedge. Top badly burred over from use.splitting, wedge, log, lumber, tool, tools, churchill island, farm

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.wedge with groove to prevent sticking. Worn top, burred overwood, splitting, wedge, tool, tools, farm, churchill island

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Used by the donor in clearing timber at Olinda and Shady Creek, Victoria. Forms part of a timber clearing tool collection including cross cut saws and Trewhella jack.wood cutting/splitting wedge. Steel. commercially made. Has relief groove.TROJAN [stamped on side]timber cutting;, timber splitting, olinda, shady creek, churchill island heritage farm, wilfred dungan collection

An agricultural tool used by loggers, or farmers, the log splitting wedge has been used for thousands of years and was originally made from stone. They were either driven straight into the wood or into a previously made incision with the blade parallel to the grain. Using a sledgehammer or other tool hammered onto the flat end, the wedge is forced deeper into the log until the force splits the timber.Timber splitting wedge; steel; commercially made; has relief groove.timber splitting, churchill island heritage farm, olinda, shady creek