Used for pinning onto clothing or other accessories. Advertisement on TravelCard is printed on one side. Two copies held.One of the marketing methods for the TravelCard, the main ticketing system for public transport in Victoria during the 1980s.White, round plastic badge with "I Like TravelCard" printed in front. Two black, directionally opposite arrows flank the top and bottom of the text. In the back the text "BLADON MARKETING" is inscribed below the safety pin. 2 copies held.BLADON MARKETINGtravelcard, the met, metropolitian transit authority, badge, public transport, tickets

Pin given to, and worn by, student nurse members of the Royal Australian Nursing Federation (R.A.N.F.). This badge is likely from a period when nursing education was moving from hospital-based training to tertiary settings. A 2013 report from the Federal Department of Health provides this following overview of nursing education: "during the mid-1980s, nursing education commenced a period of change from being hospital-based to being conducted in tertiary settings, with practical clinical experience components. By 1993, all registered nursing students in Australia were entering the profession via the university education pathway". The Royal Australian Nursing Federation (RANF) became the Australian Nursing Federation in 1989, suggesting that this button is from the 1980s.Oval-shaped green, red and gold pin. pin printed with 'R.A.N.F.' [Royal Australian Nursing Federation], 'STUDENT NURSE UNIT', and the acronym 'SNU' in the shape of Australia.nursing, nurses, students, education, badges, pins, nursing history, royal australian nursing federation

Used as a teacher aid mid 1880s by teacher Miss Catherine Hanrahan at St Joseph's Catholic School, Blampied.This is the only example of this type of teaching aid in our collection. It is intact and unrestored but not in good condition.Printed calico cloth"I see the sun/it is up in the sky/the sun is hot/the sun is red/hat/it is a hat. I see a hat/is it a big hat?/no it is not a big hat/pin/I see a pin/the pin is in the hat/is it a big pin"st joseph's, catholic, blampied, teaching aid, school

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. It is an older style pin that was released in 2006 as part of the Nostalgia Collection in a presentation case for $10-0 the set of 4. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal pin with the Legacy torch, it is silver with blue enamel around the word Legacy and red enamel in the flame.legacy appeal, fundraising, badge week

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. It is an older style pin that was released in 2006 as part of the Nostalgia Collection in a presentation case for $10-0 the set of 4. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal pin with the Legacy torch, it is gold with blue enamel around the word Legacy and red enamel in the flame.legacy appeal, fundraising, badge week

Blazer, cap and pin all worn by Neil Webb (1940py). Neil was Cox for the 1937 Head of the Lake regatta. Boys black wool blazer with red trim. Pocket embroidered with crossed oars under crest. Pocket top has rowing colours and embroidered croosed oars. School pin in lapel has crossed oars . Red school cap with crest about narrrow peak. Inside school cap crown sewn name label: 'Neil Webb' rowing

An example of a Melbourne Legacy Widow's Badge. These were worn by widows to identify themselves at events. Although the date is unknown it is an earlier example of the badge than the lapel pin at 01701. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them.A record of the badge given to widows when they join Legacy.Gold brooch of the Legacy torch with red enamel containing the words Melbourne Legacy Widow mounted on a gold bar with a brooch pin.Imprinted with 'Stokes Melb' on reverse.widows, membership

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the pin has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Small rectangular gold metal pin with a small pearl inlay on the proper left side for 15 years service. The 10 K stamp on the back surface suggests it is 10 karat gold.The abraded areas on the clasp on the back expose underlying silver coloured metal indicating that the clasp is plated. "Sarah / SC / 15 / YRS / Coventry" on the front surface. "cTo ® / .... 10K" stamped in the back surface on the lower proper left side indicating 10 karat gold. The (®) symbol indicates that the manufacturer's mark is federally registered with the US Patent and Trademark Office. The 'cTo' is the trademark by O. C. Tanner Jewelry Co. in Salt Lake City, U.S.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, pin, jewellery pins

The life member medals have GACC Life Member inscribed on the pin bar and the logo of the GACC represented on the medal. The place getter medals have inscriptions of race place getters and the race events inscribed on them. These medals indicate the importance that the Geelong Cycling community placed on - and continues to place on its life members and racing placegetters. Medals in guilded metal, some in gold colour and others in silver to represent placings in races. Broach guilded in gold, blue and white metal. This broach has a pin bar and a piece with the logo of the GACC on it.gacc; ken evans; medals;

Starting in the 18th century, glassworks in English port towns like Bristol, London, Sunderland, and Newcastle began producing hollow glass rolling pins. They were originally produced for sailors to give to loved ones, particularly young women they were hoping to woo for marriage. Plain, clear glass rolling pins became a common kitchen item in the first half of the 20th century as they were seen to be more easily cleaned that wooden ones.This item is an example of a once commonly used kitchen item.A moulded clear glass cylinder rolling pin with glass handles at each end. It is hollow and can be filled with cold or warm water to better roll a preferred food. There is no stopper at one end. It is marked with M at one end (probably indicating size).one one end - Mdomestic kitchen glass rolling-pin,

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. It is an older style pin that was released in 2006 as part of the Nostalgia Collection in a presentation case for $10-0 the set of 4. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. This badge does not have the laurel wreath which makes it unusual.Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal pin with the Legacy torch, it is silver with blue enamel around the word Legacy and red enamel in the flame.legacy appeal, fundraising, badge week

An example of badges issued by Legacy prior to 1966 for fundraising during the Legacy Appeal and Badge Week. Their donation value was 5 shillings. The symbol of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. The pins do not have laurel leaves which makes them unusual.Examples of early Legacy badges that were sold up to raise money for Legacy's work. These were before decimal currency was issued in 1966.Legacy Appeal pins with the Legacy torch issued prior to 1966, they are silver with blue enamel around the word Legacy and red enamel in the flame.On reverse '5/- Parkes Bris'.legacy appeal, fundraising, badge week

This brooch with its floral design is typical of the jewellery worn during the Romantic Period of the Victorian Era, when Queen Victoria's husband, Prince Albert, was alive 1837-1861. During this period flower motifs and brooches and pins were popular.This brooch is representative of jewellery worn during the Romantic Period of Queen Victoria's rule, 1837-1861.Brooch, light weight, rose coloured gold metal with red- brown onyx stone. Flower shaped brooch with six petals, stone attached, with rose design stem which is flanged on back. Backing plate is also rose coloured metal. A small ring is attached to the top of the brooch where the safety chain is attached. There are two small holes on back of brooch. A chain is attached to the horizontal pin on the back, and has a pin on its end. There is an Inscription engraved on the back. Engraved in script, "Coco" [Italian word for gold]flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ladies jewellery, victorian era jewellery, jewellery inscribed 'coco', brooch, jewellery, ladies' jewellery, victorian era, romantic period

This Kenter type , chain joining link or shackle would commonly be used with anchor chain in the marine industry for applications such as anchors, moorings and ballast. It is a versatile link that can be opened and closed by removing and re-inserting the taper pin and lead plug, allowing for easy joining and detaching lengths of chain, and for repairing damaged links in chain.Chain joining shackle or joining link, Kenter type , used as a marine anchor chain link. The oval shaped loop of thick metal and central metal chock comprises three pieces; two half oval pieces with shaped ends. The pieces are joined by a taper pin diagonally through holes in each piece, then fixed firmly by a lead plug in a hole near the head of the pin. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shackle, chain joining shackle, joining link, anchor chain joining link, marine chain joining link, kenter type chain joining link, marine hardware

Belaying Pin: A belaying pin is a solid metal or wooden object used on traditionally rigged sailing vessels to secure lines of running sale rigging. Largely replaced on most modern vessels by cleats, but are still used, particularly on square-rigged ships. A belaying pin is composed of a round handle and cylindrical shaft. The shaft is inserted into a hole in various strategically located wooden pin rails that line the extension of a ship's side above the level of the deck and the surrounding the base of masts, or free-standing, called (fife rails) up to the base of the pins handle. A line is then led under and behind the base of the pin then round the top in a figure-8 pattern for at least four turns. The excess line is coiled and stored neatly by taking a bight from the upper part of the final strand, looping it over and round beneath the coil, then twisting it once or more before slipping the twisted end over the top of the belaying pin to secure the coil in place. The subject item seems to have been hand made possibly by a crew member to while away his time at sea given the item is hand carved and rather personalised in appearance. History of the Loch Ard: The Loch Ard got its name from ”Loch Ard” a loch which lies to the west of Aberfoyle, and the east of Loch Lomond. It means "high lake" in Scottish Gaelic. The vessel belonged to the famous Loch Line which sailed many vessels from England to Australia. The Loch Ard was built in Glasgow by Barclay, Curdle and Co. in 1873, the vessel was a three-masted square-rigged iron sailing ship that measured 79.87 meters in length, 11.58 m in width, and 7 m in depth with a gross tonnage of 1693 tons with a mainmast that measured a massive 45.7 m in height. Loch Ard made three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of 29-year-old Captain Gibbs, who was newly married. The ship was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were other items included that were intended for display in the Melbourne International Exhibition of 1880. The voyage to Port Phillip was long but uneventful. Then at 3 am on June 1, 1878, Captain Gibbs was expecting to see land. But the Loch Ard was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4 am the fog lifted and a lookout aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head-on into the wind, the ship lost momentum, the sails fell limp and Loch Ard's bow swung back towards land. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time the ship was among the breakers and the tall cliffs of Mutton Bird Island rose behind. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves subsequently broke over the ship and the top deck became loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of Loch Ard and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as Loch Ard Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael a passenger had raced onto the deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke the open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a complete state of exhaustion, he told the men of the tragedy. Tom then returned to the gorge while the two men rode back to the station to get help. By the time they reached Loch Ard Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. Ten days after the Loch Ard tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of Loch Ard still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some items were washed up into Loch Ard Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced in March 1982. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton majolica peacock- one of only nine in the world. The peacock was destined for the Melbourne 1880 International Exhibition in. It had been well packed, which gave it adequate protection during the violent storm. Today the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artifact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck. The collections object is to also give us a snapshot into history so we are able to interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. The collections historically significance is that it is associated unfortunately with the worst and best-known shipwreck in Victoria's history. Wooden belaying pin with leaf design on the handle (hand made).Has the words Loch Ard faintly inscribed on handle (Artifact Rego No LA/32)flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, wooden belaying pin

Dough was put in forcer/case/cylinder and wooden pin pressed down to force dough out as a star-shaped biscuit. In use in a working-class home in the mid 20th century.Representative of kitchen utensils in common use in working class kitchens in 20th century prior to the common availability of packaged biscuits. Tin/metal outer cylinder/case/open one end, lid other end, with star pattern (can be removed for washing). Inner wooden pin or forcer, knob on end to be pushed into metal cylinder to force dough out through patterned disc.domestic, kitchen, food, technology, biscuit, forcer, baking, woman s, work, appliances

Biscuit dough was put into the forcer/case/cylinder and the wooden pin pressed down to force dough out as a shaped biscuit. This would have been used in use in an Orbost home in the mid 20th century.This item is representative of kitchen utensils in common use in working class kitchens in 20th century prior to the common availability of packaged biscuits.Biscuit paste forcer made up of a metal barrel with a ring for hanging at top and a wooden plunger with a knob handle on top. This is shaped like a rolling pin. Biscuit mix is forced through the end of the tube to create fancy-looking biscuits.domestic kitchen food-technology biscuit- forcer baking appliances

This is an early example of an endotracheal tube (c.1932) invented by Ivan Magill. The shattered faces and jaws of wounded soldiers presented real difficulties for the administration of anaesthesia. Ivan Magill and Stanley Rowbotham developed endotracheal tubes for these procedures that were more efficient and practical than the earlier insufflation catheters.The attached safety pin was used to prevent the loss of the tube down the patient's nose. Orange/brown rubber tubing with a bevelled edge at one end a safety pin stuck through the other end. This tube was used for nasal endotracheal intubation.Printed in black ink on tube: NO. 5 NASAL A. CHARLES KING LTD. MAGILL'S TUBE 27 / BRITISH MADEmagill, endotracheal, intubation, nasal, a. charles king ltd, england

This Baby's long white Christening gown is made from fine muslin, with short sleeves and cut-work and pin tucked front panels The women of the early settler families were very skilled dressmakers and made the clothes for their families. The early settler families followed the religious rites of their Christian Church and this Baby's Christening gown shows the dressmaking skills of the pioneer women of Moorabbin Shire c1900 , A Baby's Christening gown of fine white muslin with cut-work and needlework on yoke, gathered skirt and short sleeves with a draw string waist and neck . The front panel has 5 sections of pin tucks and cut work . clothing, christening gown, methodist church, church of england, brighton, moorabbin, pioneers, dressmaking, lacework, cutwork, market gardeners, early settlers, craftwork , bentleigh, , moorabbin shire blackburn nance, dairy farms, fruit orchards

The knitting needle gauge was used as a guide to the needle sizes used in Britain and Australia before metric measurements were adopted for weights and measures in the mid 1970's.A silver metal knitting needle gauge in the shape of a bell with different sized holes in the middle numbered from 1-5 and slots around both sides numbered from 6-22. These holes were used as a guide to gauge the size of knitting needles. The numbers and lettering have been engraved into the metal.KNITTING / PIN SIZE / IS WIDTH / OF SLOTShandcrafts, knitting, knitting gauge, george evans collection

Round silver pendant necklace with cable chain depicting a stallion and riderTwo pin holes at 12 and 6matcham skipper, pendant, necklace, silver, jewellery

This medallion is a proof of that found on the Nillumbik Shire Mayoral Chain. Silver round medallion, depicting a shield with coat of arms containing clockwise from left: a bull, a vase of flowers, a ram and a bunch of grapes. Two pin holes at 12 and 6.matcham skipper, medallion, silver, jewellery, coat of arms

An example of badges issued by Legacy prior to 1966 for fundraising during the Legacy Appeal and Badge Week. Their donation value was 2 shillings. The symbol of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. One of the pins does not have laurel leaves, the other has it wrapped around the torch instead of in the normal circular shape.Examples of early Legacy badges that were sold up to raise money for Legacy's work. These were before decimal currency was issued in 1966.Legacy Appeal pins with the Legacy torch issued prior to 1966, they are silver with blue enamel around the word Legacy and red enamel in the flame.On reverse '2/- Parkes Bris'.legacy appeal, fundraising, badge week

These hat pins represents women's fashion in the late 19thC and early 20thC. As the material used in the construction is not of a high monetary value it can be assumed it was everyday woman's apparel to keep the hat firmly fastened into the hair. It does indicate that fashion of the time was important and many women used their craftwork skills to create their own hat pins. This item is a reflection of the fashion mode of the late 19thC and early 20thC when long hair needed to be controlled by hair pins It is also an example of society's mores of tidiness 14 lady's steel hat pins in various styles numbered A -i A) 6x pearl tear-drop ; B) 1x pink metal beads;C) gold ball in 'oyster shell'; D) gold ball; E) pink plastic weave; F) silver metal ball; g) black bead; h) white ball; i) pale blue glass set in brassmoorabbin, brighton, early settlers, pioneers, cheltenham, craftwork, clothing

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the pin has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Small rectangular gold metal pin with a faceted pink stone inlay on the proper left side and a faceted clear stone on the proper right side. Two raised flower motifs on the proper right side. The 10k stamped on the back surface suggests it is made of 10 karat gold.The abraded areas on the clasp on the back expose underlying silver coloured metal indicating that the clasp is plated."Sarah / SC / 10 YRS / Coventry" raised inscription on the front surface. "® cTo / 10 K" stamped on the lower proper left side of the back surface, indicating 10 karat gold. The ® symbol indicates that the manufacturer's mark is federally registered with the US Patent and Trademark Office. The 'cTo' is the trademark by O. C. Tanner Jewelry Co. in Salt Lake City, U.S.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, pin, jewellery pin

This is an early example of an endotracheal tube invented by Ivan Magill. The shattered faces and jaws of wounded soldiers presented real difficulties for the administration of anaesthesia. Ivan Magill and Stanley Rowbotham developed endotracheal tubes for these procedures that were more efficient and practical than the earlier insufflation catheters.The attached safety pin was used to prevent the loss of the tube down the patient's nose.Brown rubber tubing with three pairs of holes at one end and a bevelled edge at the other for nasal endotracheal intubation. There is a large safety pin stuck through the first pair of holes.magill, ivan, endotracheal, intubation, nasal, airway

An example of badges issued by Legacy for fundraising during the Legacy Appeal and Badge Week. It is an older style pin that was released in 2006 as part of the Nostalgia Collection in a presentation case for $10-0 the set of 4. The badge of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. This badge does not have the laurel wreath which makes it unusual.Example of Legacy badges that were sold up to raise money for Legacy's work. Legacy Appeal pin with the Legacy torch, it is gold with white enamel around a torch, blue enamel around the word Legacy and red enamel in the flame.legacy appeal, fundraising, badge week

A tie pin is a neckwear controlling device, originally worn by wealthy English gentlemen to secure the folds of their cravats. They were first popularized at the beginning of the 19th century. Cravats were made of silk, satin, lace and lightly starched cambric, lawn and muslin, and stickpins were necessary accoutrements to keep these expensive fabrics in place and safe. Stickpins commonly used pearls, and other precious gemstones set in gold or other precious metals and were designed specifically for their owners. By the 1860s, wearing cravats had been embraced by the English upper middle classes with a consequently lower quality of materials and designs used in both the neckwear and in the stickpins used to keep it in place. By the 1870s Americans had embraced stickpins and designs were mass-produced. 3 men's metal lapel pins with coloured glass inserts 1 yellow 2 red jewellery, tie-pins, male neckwear, moorabbin, brighton, early settlers, pioneers, cheltenham

Sarah Coventry Pty. Ltd. was a North American jewellery company that was established in 1949 by the Stuart family as part of Emmons Jewelry, Inc. It began operations in England and Australia in 1968, and in Australia it moved from Carlton in Melbourne to Wodonga in 1969. The premises were originally on High St. in Wodonga, but a new warehouse was built in Melbourne Rd. later in 1969. It was a direct selling jewellery business using a party-plan model similar to Tupperware and Avon. The sales reps or 'Hostesses' were provided with jewellery samples in demonstration kits, which they displayed at jewellery parties in their homes. The designs for jewellery such as brooches, necklaces, earrings, chokers and bracelets were purchased from freelance designers and jewellery manufacturers rather than in-house designers. In 1979 Sarah Coventry Pty. Ltd. in Wodonga was bought by three Australian businessmen, including Wodonga local Jim Sawyer, and continued to sell jewellery under the name "Sargem Pty. Ltd”, for several more years in the 1980s. As part of the Sarah Coventry collection, the pin has local significance with the decentralised commercial development of regional centres such as Wodonga in NE Victoria, as well as national and international significance from the perspective of social and economic developments for women after World War II. The direct selling party-plan business model Sarah Coventry was based on is also considered the first of its kind for jewellery.Small rectangular gold metal pin for five years service with a faceted pink stone inlay on the proper left side, the name and initials of Sarah Coventry in the central area and three flowers on the proper right side. The 10 K stamp on the back surface suggests it is made of 10 karat gold. Abraded areas on the high points of the clasp on the back surface expose underlying silver coloured metal indicating that the clasp is plated."Sarah / SC / 5 YRS / Coventry" on the front surface. "® cTo / 10 K" stamped into the back surface on the lower proper left side, indicating 10 karat gold. The (®) symbol indicates that the manufacturer's mark is federally registered with the US Patent and Trademark Office. The 'cTo' is the trademark by O. C. Tanner Jewelry Co. in Salt Lake City, U.S.sarah coventry, jewellery, wodonga, costume jewellery, vintage fashion jewellery, pin, jewellery pins