Item belonged to Lieutenant Leonard V. GREAVES 310387 who served with the Royal Australian Electrical and Mechanical Engineers 1965-1971.Khaki green woven neck tieraeme, army tie

The firm of "Carlsen Brothers" from Gentoft in Denmark built two interesting and innovative lines of mechanical calculators under the "Contex" brand name.Contex Adding machine, In grey/blue/cream plastic with 48 digits and 9 results window. Comes in brown embossed vinyl wooden case with hinges, and lined with red felt. Leatherette.CONTEX Serial no. 411017021adding machines, calculators

Used for splitting wooden palings used in the construction of paling fences. Dates prior to palings being mass-produced by mechanical saws in timber mills.A rectangular iron blade attached to a wooden handle. The bottom of the blade is the sharp edge. tool hand-tool paling-knife split-timber

This is a photo of one of the first upright machine grape harvesters operating in the Rutherglen area. It was operating in the B Seppelt & sons Distillery Road vineyards on the edge of the Murray River in Wahgunyah. Riding on the top of the machine are from left to right Mandy Jones (partly obscured), Rolly Guscot (vineyard manager), machine driver, Doug Jones (manager) and Leanne Schoen (nee Jones). Mandy Jones and Leanne Schoen being the daughters of Doug JonesBlack and white photograph of several people riding on top of a machine operating in a vineyard. On left hand side is Leanne Jones , her father Doug Jones ( Manager of Seppelts) The photograph was taken in the flats vineyard ( now Pfeiffer vineyard) It was reputably the first mechanical grape harvester in the areaOn back of photo: "170% [upper case D in small circle] Seppelt's"wineries, north east victoria, wine industry, mechanical harvester, grape harvest, seppelts winery, rutherglen, doug jones

The book centres on the lives of four mechanical engineers, Otto SCHMACHER, Alfred HARMAN, Albert LONGONI and Fred DAVID and their contribution to the manufacturing industry in Port Melbourne.Blue covered book with title & author's name in white and a black & white photograph of Port Melbourne Engineering Works on the front cover.industry - manufacturing, port melbourne engineering works, commonwealth aircraft factory, otto schumacher, alfred harman, albert longoni, fred david

These knives were used during beet harvesting. The beets were mechanically lifted, with workers following to pick up each beet, removing the tops with these knives.A beet knife with a long blade which has a pointed end. The handle is short and brown with four rivets in it that have one black dot in the centre of each."Joseph ---- & Sons, Endure, Sheffield" on the knife bladesugarbeet

Higher education in east Gippsland dates back to 1890, and the opening of the Bairnsdale District School of Mines, In 1986 the Bairnsdale School of Mines and the Sale and Bairnsdale Technical schools amalgamated to form the East Gippsland Community College of TAFE. In 1995 it became the East Gippsland Institute of Technology, and in 2011 changed its name to Advance TAFE. The Bairnsdale District School of Mines Prospectus includes the members of council, a photographic image of the school, teaching staff, rules relating to students and instructors, Constitution, and a prospectus of subjects including Mining and Science Subjects, Diploma Courses, Preliminary Training, Metallurgy Course, Mining Engineering Course, Battery Manager's Certificate, Assayer's Certificate. It also includes a scale of fees, information on the Metallurgical Plant, Chemistry, Assaying and Metallurgy, Geology, Mining Geology, Mining, Petrology, Dynamics and Heat, Magnetism & Electricity, Mechanics Applied to Mining, Land Surveying, Mine Surveying, Algebra, Euclid, Trigonometry, Mechanical Drawing, Practical Plane Geometry, Practical Solid Geometry, Engineering Drawing, Art Subjects, and a list of certificates issued by the school since 1892.Grey soft covered book of 68 pages. The Bairsndale District School of Mines Prospectus includes the members of council, an photographic image of the school, teaching staff, rules relating to students and instructors, Constitution, and a prospectus of subjects including Mining and Science Subjects, Diploma Courses, Preliminary Training, Metallurgy Course, Mining Engineering Course, Battery Manager's Certificate, Assayer's Certificate. It also includes a scale of fees, information on the Metallurgical Plant and its chares, Chemistry, Assaying and Metallurgy, Geology, Mining Geology, Mining, Petrology, Dynamics and Heat, Magnetism & Electricity, Mechanics Applied to Mining, Land Surveying, Mine Surveying, Algebra, Euclid, Trigonometry, Mechanical Drawing, Practical Plane Geometry, Practical Solid Geometry, Engineering Drawing, Art Subjects, and a list of certificates issued by the school since 1892.bairnsdale district school of mines, bairnsdale, school of mines, donald clark, francis w. sewell, j.v.r. anderson, a.d. pleydell, walter seehusen, director, mining engineering, metallurgy, academy of arts, municipal surveyor, 1914

Army mess dress is the formal military evening dress worn by Army officers and senior non-commissioned officers in their respective messes or at other formal occasions. Tailor made item belonging to Lieutenant Leonard V. GREAVES 310387. Badges attached to jacket collar indicate GREAVES served with the Royal Australian Electrical and Mechanical Engineers (RAEME). This uniform serves as an example of the military dress worn by the Royal Australian Electrical and Mechanical Engineer during the late sixties.The Royal Corps of Australian Electrical and Mechanical Engineers (RAEME) is a corps of the Australian Army that has responsibility for the maintenance and recovery of all Army electrical and mechanical equipment. RAEME has members from both the Australian Regular Army and the Army Reserve. Prior to being given the title of 'Royal', the Australian Electrical and Mechanical Engineers (AEME) were raised on 1 December 1942. Some 64 years later, on 1 December 2006, the last independent RAEME Workshop was disbanded. RAEME soldiers continue in their role to provide support through attachment to other units in Tech Support Troops, Sections or Platoons.Two piece dark blue/black material suit consisting of long pants with red stripe and jacket with metal buttons and two badges attached to collaraustralian army mess dress, raeme

This cash register was made in 1903 at Dayton, Ohio (USA) by the National Cash Register (NCR) company, which still operates today manufacturing commercial equipment, including Automatic Teller Machines. Mr. Thomas Watson, the founder of International Business Machines (IBM), started as a traveling salesman for NCR.This register came from a shop owned by Mrs. Dulcie Anderson near the Star Hotel in Walhalla. This cash register consists a brass register that is now heavenly tarnished. The register has two mechanical displays on the back and fore on the front. The register is siting on a wooden chest with a dark varnish and cash draws ladled A,B,D,E,H,K, with draw E missing the metal letter.'NATIONAL' on the back.money, shop, shops, 1903, cash, cash register

Memo card - Victorian railways. Addressed to Act. Dr. J.H. Badham, Bendigo. Melbourne 21/7/1941. Your memo of Driver at Castlemaine has been duly received at this office. A.C.Ahlston, Chief Mechanical Engineer. Handwritten on back, Notified successful applicant 27/4/1941.document, memo, railway, memo card. victorian railways. j.h.badham.

Cylindrical (planetary) sharpeners: These mechanisms are also called planetary sharpeners, in reference to their use of planetary gears. A larger, stationary planetary sharpener can be mounted on a desk or wall and powered by a hand crank. Typically, the pencil is inserted into the sharpener with one hand, and the crank is turned with the other. This rotates a set of helical cylindrical cutters in the mechanism, set at an acute angle to each other. The multiple cutting edges quickly sharpen the pencil, with a more precise finish than a single-blade device. Some cylindrical sharpeners have only one helical cutter cylinder, but most have two cylinders or more. https://en.wikipedia.org/wiki/Pencil_sharpener This mechanical pencil sharpener once belonged to Dr. Angus. It was one of his personal belongings and would have been used in his office. The mechanical pencil sharpener has provision for attaching it to a flat surface such as a desk. The user would insert the pencil into the hole in the front of the sharpener, wind the handle around several times until the pencil is the desired sharpness then remove the pencil. The plastic compartment is clear so that the user can see when it needs emptying, slide down the metal braces on the side of it, remove and empty the compartment and fit it back onto the stand. The sharpener was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Pencil sharpener, mechanical, part of the W.R. Angus Collection. Metal stand and frame, plastic compartment to hold the shavings. Rotating plastic handle. Metal front on compartment has a re-inforced hole for inserting pencil. Plastic oompartment has sliding metal bracket on each side to allow its removal. Base has two holes for mounting on flat surface. Mid 1900's. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, pencil sharpener, mechanical pencil sharpener, office equipment, office stationery

Heavily pitted American helmet collected by Craftsman F W Penfold during his service in Royal Corps of Australian Electrical and Mechanical Engineers, Vietnam 1968.Olive green coloured metal helmet.helmet, us army, vietnam, uniform, penfold, raeme, 1968

Blueprint, printed white on blue paper, of the mechanical engineering drawings of "Elevation of Four Cylinder Shearing Machine Shewing3 Cuts on Face and 1 Cut on Back" -395C"Elevation of Four Cylinder Shearing Machine Shewing3 Cuts on Face and 1 Cut on Back" -395C.ELEVATIOB OF FOUR CYLINDER SHEARING MACHINE SHEWING 3 CUTS ON FACE AND 1 CUT ON BACK -395Cshearing machinery shearing sheds shearing, shearing machinery, shearing sheds, shearing

Victorian railways memo re 1961, wheat harvest from W .Featonby - Asst. Chief Mechanical Engineer - re accommodation for engine crews engaged in movement of wheat in the Bendigo area and dispatch of 2 railway cars. Record in fine paper - small sheet (xref 1325.31 Log Book).document, memo, railway, w .featonby - asst. chief mechanical engineer /( xref 1325.31) / 1961 wheat harvest /

This matchbox holder / striker was made to advertise Cooper's shears, a well known Australian brand of sheep shears. An image of a mechanical Cooper's shear can be seen on one side.Matchbox holder, advertising Cooper's Shearing Machines. Matchbox holder, advertising Cooper's Shearing Machines. Matchbox holder, advertising Cooper's Shearing Machines. The area for striking matches can be seen. Matchbox holder, advertising Cooper's Shearing Machines.COOPER / SHEARING / MACHINES / DO BEST WORK NEW MODEL / COOPER / SHEAR PROV. PAT. / 16367shearing, cooper engineering company pty ltd

Identity discs issued to Leigh Norman Moebus, Regt No 3796848 served Vietnam with the Royal Australian Electrical and Mechanical Engineers (RAEME) 2.7.1970 to 30.6.1971 during his National Service.One Round and One Octagonal Identity disc, brass on a silver chain.“JN.MOEBUS 3796898 CE A Pos Aust”military-equipment, uniforms - army, identity discs

GIZYCKI, Andrzej Roman Witold, AKA GIZYCKI de GOZDAWA, Andrew Roman Witold, Service number: 37505, served in Royal Corps of Australian Electrical and Mechanical Engineers, 7RAR, 1967Painting in Gold Metal Frame ( Oil ) streched canvas depicting Soldier in the reeds combat camoflage and rifle.Australian Army Badge Rank (SLR ) Raeme Badge & 2 YG on hat same artist of soldier in other painting of Ziggy. Same Frame.soldier, raeme, ziggy, gizycki

Ron White was born in 1920. He received a Diploma of Mechanical Engineering at Footscray Technical School in 1946. He started work as a laboratory assistant and after several promotions was appointed Senior Operator in 1948. In 1949, he was Engineer, Grade 1 (Hydro Areas). After further promotions he became Assistant Area Engineer, Rubicon at new Eildon Power Station and Area Engineer, Kiewa in commissioning Mt Beauty Terminal Station and West Kiewa Power Station.. By 1956, he was the Area Operations Engineer at Kiewa and four years later the Kiewa Electrical Superintendent (Operations and Maintenance) . In 1961, he was officially recognised as deputy for the General Superintendent, Kiewa. In 1966 he was appointed General Superintendent Kiewa and Kiewa became 'a branch of the Transmission Department'. In 1974, the Rubicon / Eildon Area was also under Ron's control. His title was "Principal Hydro Engineer, Hydro Division, Transmission Operations Department. He held this position until his retirement in 1985.Ron White was an important identity in his role as Principal Hydro Engineer from 1966 to 1985 after the completion of the Kiewa Hydro Electric Scheme. His long period of service involved him in the construction, operation and maintenance of the SECV's Hydro Electric Schemes and administration of related catchment areas. He had a close association with the local communities and care for the welfare of employees. He lived in Mt Beauty and was well respected in the community and beyond. He passed away on 30 September 2019, aged 99 years.A) History of Ron White's Working Life: including papers relating to "Promotion & Staff Appointment" B) Ron White's Retirement - 11th Jan. 1985: papers, cards, letters, photos, disc/plaque C) Ron White's Certificates: Diploma of Mechanical Engineering; First Aid; D) Ron White's Correspondence - miscellaneous E) Ron White's History of the 'Kiewa Scheme' from 1936- 1966. Written 1986 F) Ron White's Photo album Includes photos of him and the 2003 bushfires G) Miscellaneous Photos (not labelled) from Ron's photo album. Possibly relatives including nieces and nephews. H) Pewter Mug presented to Ron - Water Board I) Wall hanging presented to Ron - Scouts J) Ron White's Slide Ruler & Mathematical Instruments K) Collection of 7 books owned by Ron L) Starting Pistol Caps box M) Ice-cream serverF) One photo of Ron with 'Ken Connors'. One photo with 'l to r: Norm Middleton, Graham Napier, Ron White, Les Peart.' G) 2003 fires has a note re time, date and whereabouts of fires H) "Presented To / Ron White / In Appreciation For Service / To The / Kiewa Valley / Water Authority / And / Its predecessor Bodies / December 1994 I) Wall hanging: On emblem - "Lord Baden-Powell Society / The Scout Association of Australia". On Name Plate below - Ronald K. White 1989" J) mathematical Instruments have 'R. W' embossed in red on the corner of the cover M) 100 Straitline, Starting Pistol Caps N) National Ice-cream Server with stainless steel spring Size 20 ron white, hydro engineer, kiewa hydro electric scheme

Slouch hat, khaki, puggaree, light khaki, colour patch with WWII red rectrangle with black ball* in centre. Rising Sun badge on raised edge is badly corroded green internally. Liner & chin strap removed. * The colour patch is of the Corps of Australian Electrical & Mechanical Engineers (field units) 1942 - 1945.Written in ink on puggaree under the colour patch: “Geelong”uniforms - army, costume - male headwear, slouch hat

Circular brass clock, Naval, has hour, minute & second hands. The face is white with 12 hr figures in black, the 24 hr numerals are in white. The glass front has a hinge on the right side. A small brass knob on the left side acts as the handle. The clock is mechanical, wound up from the front.“Smiths Astral, Made in Great Britain”horology - clocks, military history - navy

Carbon copies of a foolscap form with Ballarat School of Mines apprentice name, attendance, examination results and general remarks and Victorian Railway Reports. The originals were signed by the Head of Department and Principal. Some heads of departments signed the copy including. H. Goldsmith. Subjects include Fitting and Turning and Mechanical Engineering, Electrical Mechanics. fitting and turning, mechanical engineering, trades, apprentices, school report, h. goldsmith

Newspaper clipping from The Courier, Ballarat, 10/12/1970 about the retention of the tramline in Wendouree Parade as a tourist attraction has been urged by the Brown Hill Progress Association. Notes suggested times of operation, depot could be a mechanical transport museum and intended to approach local Members of Parliament and various organisations as well.In pencil in top right hand corner '10/12/70'trams, tramways, brown hill progress association, museum establishment, tram preservation

Memorandum - photocopy of original - 2 A4 pages - from Alex Gash - Group Manager Production & Customer Liaison Workshops Division to A. Doery Mechanical System Engineer Tram Fleet, dated 18/9/1992 about the cost of the conversion of the Z3 class tram to suit a roving conductor. Gives the cost per tram.Has comments partly readable on the top of the first sheet.trams, tramways, z3 class, overhauls, preston workshops, conductors