Showing 2367 items
matching lead
-
Moorabbin Air Museum
Headwear (Item) - Flying Helmet Leather With Plastic Communication Lead Attached
Inside has label with V498 Made In Australia 1942 Size -
Flagstaff Hill Maritime Museum and Village
Decorative object - Vase, ca. 1970s
This beautiful hand-cut crystal vase was made in Poland by Violetta Crystal Glassworks. Its design is decorative and functional. It reflects vases produced in the late 19th and early 20th century when hand-cut lead Crystalware was popular in England. The lead content in the glass makes the glass softer and easier to hand-cut. The crystal clear glass sparkles in the light. Crystalware was kept for special occasions such as weddings and religious events. The Violetta Crystal Glassworks was founded in 1864 by Franz Losky, at the district of in Stronie Śląskie. Its original name was Oransko-Nassawska Glassworks, then later named Oranienhütte. The Glassworks came under Poland's rule after World War II. In 1950 it was subject to the Central Board of the Glass Industry and Precious Ceramics, with its seat in Sosnowiec, and the Glassworks was called United Glassworks of the Lower Silesia Region – State Crystal Glassworks in Stronie Śląskie.In 1953 it began exporting its products. In 1970 the name was changed to Violetta Crystal Glassworks in the Polish district of Stronie Śląskie. The firm became the major exporter of Polish glass. From 1992, structural changes in the company resulted in the loss of production, which stopped altogether in May, 2008. Minex CEI SA bought the plant in 2011 and operated it until the end of 2018.This hand-cut lead crystal vase design reflects that of vases produced in the late-19th and early-20th centuries. It is representative of decorative domestic items used during that era, particularly for important and special occasions such as weddings and religious events. Crystalware was cherished for its beauty. The vase is also significant for its association with the renowned Violetta Crystal Glassworks established in 1864 by Franz Losky, which was at one time the greatest exporter of hand-cut crystal made in Poland.Vase; clear hand-cut glass, 24 per cent lead crystal. The vase is wide at the top with a scalloped edge. It tapers inwards to a round foot. A clear rectangular label with gold text is attached. It is branded Violetta hand-cut crystal, made in Poland. On the label: "MADE IN POLAND" "Violetta" "Hand cut 24 % lead crystal" "(R)" within a circleflagstaff hill maritime village, shipwreck coast, flagstaff hill, warrnambool, flagstaff hill museum and village, domestic object, decorative object, functional object, vase, crystal vase, cut glass vase, hand-cut glass, violetta, violetta glassworks, polish glassworks, made in poland, vase with scalloped edge, crystal glassworks, franz losky, oransko-nassawska glassworks, oranienhütte, stronie śląskie, hand-cut crystal, crystalware -
The Beechworth Burke Museum
Tool - Propelling Pencil
A propelling pencil is a type of mechanical pencil.The lead is manually pushed down a tube of matching diameter, and is friction-fit. A small rod inside the pencil pushes the lead forward, as needed, usually with a twist an action mechanism.The social history objects held in the Burke Museum's collection help to tell the stories of Beechworth's past by showing the social, cultural, and economic aspects of the town's history.A small silver propelling pencil with a diamond patterned handle.England/ V. S. Lead/mechanical pencil, writing equipment, pencil -
Flagstaff Hill Maritime Museum and Village
Lead Beater Balls, 19th to 20th century
These lead beater balls were used be plumbers to shape metal. The balls would be held in a sling and the lead was formed around them by being beaten with a hammer or mallet.These lead beater balls are a good example of the tools of trade for plumbers.Lead Beater Balls, quantity of 47, rounded solid wooden balls with domed ends, various sizes. Balls were used by plumbers for beating lead into different shapes and sizes, spheroid in shape and ranging in size. Balls were placed in a sling and lead was formed around them by beating with a Bossing mallet e.g. Item No 1449.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plumbers tools, lead beater balls, plumber's balls -
Inglewood & District Historical Society
Functional object (Item) - Gold Mine Company Seal Embosser - Commerce Label, Seal Embosser Stamp
The figure 5 appears on the base and also on the bottom of the Seal Anvil. The Seal stamp reads 'Old Inglewood Deep Lead Mining Company No Liability Inglewood' -
Stawell Historical Society Inc
Photograph, Grave of John McClure
The Deep Lead Cemetery. The grave under the Cypress trees is that of John McClure B.A. who died in 1859 at the age of 46 years. He was the first clerk of petty sessions at Pleasant Creek and was one of the first buried at the deep lead cemetery which at the time was reserved but not fenced.Colour Photograph of a grave under cypress trees in bushlandGrave of John McClure at Deep Lead Cemetery -
8th/13th Victorian Mounted Rifles Regimental Collection
Functional object - Horse lead
Lead used by dismounted horseman to control horse while exercising or grooming. Clips attached to halter or bridle.Representative of equipment used in handling of horses in light horseLeather lead with two brass snap clips on one end and a loop on the other.military, horse, horse husbandry, light horse -
Stawell Historical Society Inc
Handmade frypan
Hand Made by Joe Mitchell Alluvial Miner at Deep Lead. Died around 1991 age about 70 Blacksmither. Wroye to Stawell Time News about Metal Detecting. and Gold Mining in the 1980's Black Metal with HandleMade by Joe Mitchell Deep Lead -
National Wool Museum
Weights
A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter"A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter".knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting -
National Wool Museum
Weights
A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter"A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter".knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting -
National Wool Museum
Weights
A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter"A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter".knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting -
National Wool Museum
Weights
A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter"A lead weight, with an iron suspension hook attached to the top end. Associated with the "Beehive Sock Knitter".knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting -
Queenscliffe Maritime Museum
Equipment - Sounding lead line
Although the provenance cannot be confirmed it is believed that this lead possibly originated from the SS Time.Since at least the sixth century B.C. the sounding lead or sounding weight was in use in the Mediterranean area for maritime navigation. It is the oldest known marine navigational instrument and it remained a primary navigational aid in coastal waters and rivers well into the twentieth century.A sounding lead with rope line attached. One surviving leather fathom depth marker is spliced into the rope.sound lead, navigation -
Tatura Irrigation & Wartime Camps Museum
Artwork, other - Kangaroo - Lead, 1940's
Made by internee at Camp 3, TaturaHandmade lead kangaroo in upright position. Nailed at legs and tail to circular wood baseglenk e, kangaroo, lead, ornament, camp 3, tatura, ww2 camp 3, ornaments, metal -
Flagstaff Hill Maritime Museum and Village
Tool - Bullet Mould, From 1600s to early 19th century
Musket balls are the ammunition used in muskets the weapons used during the English and American Civil Wars. The balls could be made from any metal alloy, but many were made from lead. Lead can be melted at reasonably low temperatures and so lead musket balls could be made over a camp fire. Lead could be readily sourced from such places like church roofs or even coffins, and recast from old musket balls, so it was an easy material to work with while preparing for battle. The soldier would carry a crucible in which to melt the lead, he would put the material into it and place it over the fire until it had formed into a liquid. Musket ball moulds like the subject item, had a small hole above one of the domes where the liquid could be poured into once the two domes were closed together. The soldier would wait until it cooled then opened the mould to reveal a solid lead ball inside. Because these were cast in halves even though pressed together, there would always be a small amount of liquid lead leakage which would form a thin crust around the ball. These needed to be filed off before being used inside a musket, so some soldiers would pop a few in their mouths and roll them around, chewing off the excess until the ball was smooth. The obvious downside to this method is that lead is poisonous. A tool used to make ammunition for black powder firearms either muskets or pistols from the early part of the 18th to mid 19th century. After this time enclosed brass cartridges that held the propellent powder and bullet were starting to come into wide spread use, negating the need for a firearm to first have black powder placed in a barrel then the ball rammed on top and finally the firearm primed with powder or a percussion cap.Musket rifle/ pistol bullet mold. Makes .50 -caliber- round balls with a sprew cutter to cut off excess lead.Marked 50flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shot pliers, lead shot, shot, armoury, firearms, bullet, cast bullet, lead ball, lead shot, scissor mould -
National Vietnam Veterans Museum (NVVM)
Equipment - Radio Handset
A typical handset for a heavy duty radio communications set used in the field in Vietnam.Curved black plastic phone handset with coiled lead. There is a five pin plug/screw on plug at the end of the cord. Heavy duty unit.Handset H-250/U. Sonetronics Contract DAAB07-93-D-G010 US on handset. MFG 79 566 May 94 on the lead.handset, field radio, vietnam war, communications, signals, radio -
Tatura Irrigation & Wartime Camps Museum
Ornament - Kangaroo, c1940
handmade from lead seals of milk cans and telephone cables on wooden base at camp 3 Tatura and found buried just beyond perimeter wiresculpted kangaroo made from lead seals of milk cans and telephone cables on carved wooden basehandcrafts, sculpture, woodcarving, domestic, items, ornaments, decorative -
Hume City Civic Collection
Tool - HB lead pencil, Unknown
Children used HB lead pencils in class after graduating from either writing on blackboards or slates and before they reached the middle primary school classes where they used pen and ink.A wooden lead pencil with a rounded top painted in red and black along its length with gold lettering Australia Staedtler Tradition 110 HBwriting materials, pencils, schools -
Queenscliffe Maritime Museum
Photograph, Photographer unknown, Queenscliff Customs house
Undated photo of the original Customs House building at Queenscliffe, with the adjacent steps that lead up the hill to the 'Black' high-light lighthouse.RealismBlack & white photo of the original Queenscliffe Customs House building, with the adjacent steps that lead up the hill to the 'Black' high-light lighthouse.On the reverse - NILcustoms house building, steps, lighthouse -
Stawell Historical Society Inc
Photograph, Alice Maud (Perry) Grinter
Teacher at Deep Lead School 712 From 1901 -1909B/W Photo. Portrait of a Lady wearing Glasses and Pearl NecklaceOn Reverse: Alice Maud (Perry) Grinter. Teacher at Deep Lead 1901, Sewing Mistress 1906, Resigned 1909.deep lead school, education -
Stawell Historical Society Inc
Memorabilia - Realia, c1860's-1880's
Reported as being with the Davidson family of Deep Lead for a long time. Who may have been the original Donors through Cliff LoatsSilver Pated Communion Set. Two wafer Plates, two challises, wine jug and serving tray. Used at Deep Lead Congregational Churchstawell, religion -
The Beechworth Burke Museum
Photograph
This photograph depicts four men standing near a large unidentified building. This building is the entrance to a deep lead mine shaft. There is a bridge entering the building, which was used to access the elevator to the shaft. Deep lead mining involved placing large shafts into the ground which miners use to access deeper locations in order to excavate the rocks in the search for lead. Deep lead mining was highly dangerous as roofs could cave in of the soil was loose. Therefore, this particular mining considered to be highly undesirable profession as many miners did not want to work long hours nor risk their lives in the search for lead. Indigo Shire was a large area where deep lead mining took place, and thus the landscape and environment was largely impacted by these mining businesses. The Indigo Shire grew in population and wealth in the early 1850s when people came into this location in the hopes of finding gold and making a fortune. Ultimately, the accessibility and availability of gold and precious metals decreased once the gold reserves dried up and alongside this, the large population moved away. The Ovens was also heavily impacted environmentally as deep mining resulted in the change in land formation.The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray an open cut sluicing site can reveal important information for society and technology for the date when the photograph was taken. This image is of important historical significance for its ability to convey information about the methods used to find gold in Indigo Shire. It also shows a location where deep mining was undertook which provides insight into the impact of deep mining on the environment at a time when it was done. This image is important for current research into the history of Indigo Shire, a region in Victoria's north-east. Therefore, this image has the capacity to be beneficial for research into society and the motivations of those living and working in this region during this period and therefore, has social significance. The Beechworth Burke Museum has additional images relating to deep lead mining and Indigo Shire which can be analysed and studied alongside images like this one.Sepia coloured retangular photo printed on gloss photographic paper.Reverse: 1997, 2510/ A02570/ Deep Lead Mining/ page 94/ 65%/ Burke Museum, Photo 44beechworth, burke museum, indigo shire, deep lead mining, mining, gold, gold mining -
Queenscliffe Maritime Museum
Photograph, Photographer unknown
Undated black & white photo of the original Customs House building at Queenscliffe, with the adjacent steps that lead up the hill to the 'Black' high-light lighthouse & Flag pole.RealismBlack & white photo of the original Queenscliffe Customs House building, with the adjacent steps that lead up the hill to the 'Black' high-light lighthouse.On the reverse - "date?", "present lighthouse 1863", "Mrs Campbell(?)"customs house building, steps, lighthouse -
Bendigo Historical Society Inc.
Document - KELLY AND ALLSOP COLLECTION: SHARE CERTIFICATES - MOUNT DEDDICK SILVER-LEAD MINING CO, 14/07/1898 to 09/02/1899
Document. KELLY & ALLSOP COLLECTION. Two share certificates issued by the Mount Deddick Silver-Lead Mining Company, No Liability, Snowy River, East Gippsland. Certificate No. 1851 for 20 fully paid up shares @ 1 Pound each issued on 14 July 1898 to M.Kelly. Certificate No. 2113 for 5 fully paid up shares @ 1 Pound each issued on 9 Feb.1899 to M.Kelly of Bendigo. Capital raised was 60,000 Pounds from 60,000 shares. Each certificate signed by the Manager (signature not readable). Registered office - 31 Queen St., Melbourne.Mount Deddick Silver-Lead Mining Co.business, stockbroker, kelly & allsop, kelly & allsop collection, share certificates, mount deddick silver-lead mining co., m.kelly. -
Flagstaff Hill Maritime Museum and Village
Equipment - Lead line
The lead line or hand lead is a simple navigational instrument used as a depth finder to measure the depth of water under the ship’s keel and to take samples of the sea bed. The long line may be marked at regular intervals with tags of different coloured and textured fabric, such as rope, leather and cloth. Each tag was a code to represent a certain depth. The leadsman’s eyes and hands could distinguish the depth easily as he drew in the lead line, day or night and in poor weather conditions. The lead weight could be between 7 -14 pounds (3.5 – 6.5kg) and the rope would be approximately 25 fathoms (45m). The hollowed-out end of the weight would hold a stick substance such as tallow or wax, which would pick up samples from the sea bed and indicate whether the vessel was close to shore. The leadsman would stand at the front of the vessel and cast the lead line into the sea. When it hit bottom he would note the tag marker nearest the surface of the water and call out his finding. Then he would haul it up again and examine the kind of matter that adhered to the end of the weight, whether it be sand, mud, gravel, and the colour of it. This information would be given to the ship’s helmsman or navigator and would help indicate the proximity to the land.This handheld lead is an example of early marine navigational equipment used be sailors to travel the seas. It helps to understand the history and progress made form the very basic to the sophisticated technology of today.Lead line, sounding line or depth finder. Long length of rope with heavy lead weight attached to end. Coloured fabric ties at regular intervals along rope represent different depths. Concave base of weight holds sticky substance e.g. tallow, wax, providing adhesive surface to collect samples of sea bed e.g. sand, shell, pebbles. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, lead line, depth finder, hand lead, sounding lin, leadsmane, navigation instrument -
Flagstaff Hill Maritime Museum and Village
Dresser
Also called Lead Beater, Lead Dresser or Plumbers' Dresser -Wooden lead beating mallet.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lead beater, dresser, plumbers' dresser -
Marysville & District Historical Society
Photograph (item) - Black and white photograph, Unknown
A black and white photograph which shows two saddled horses standing at the sign that once stood near the track that lead to the base of Steavenson Falls in Marysville in Victoria.A black and white photograph which shows two saddled horses standing at the sign that once stood near the track that lead to the base of Steavenson Falls in Marysville in Victoria. The sign was destroyed in the 2009 Black Saturday bushfires. The Steavenson Falls is named after the Victorian Assistant Commissioner of Roads and Bridges, John Steavenson who arrived in Victoria in the early 1860s.STEAVENSON FALLS/ MARYSVILLE/ HEIGHT 271 FEETsteavenson falls, marysville, victoria, waterfalls, john steavenson -
Flagstaff Hill Maritime Museum and Village
Weapon - Lead shot, Before 1878
The objects are a sample of medium caliber lead shot raised by Flagstaff Hill divers from the Loch Ard shipwreck site in 1976. Included in the vessel’s cargo manifest were 22 tonnes of lead shot, packed into her holds in cloth bags and wooden casks. These 49 pieces of 7 mm diameter lead shot are identical in size and smoothness. Each one also bears the same slightly raised square of residual metal left behind by the process of pouring molten lead into individual but identical moulds through a small (square) opening. These pieces of shot can be compared with contrast pieces in the Maritime Village collection, which are examples of shot tower pellet production; an industrial technique more suited to the creation of uniformly spherical balls that do not need subsequent trimming. In conventional shot tower production, lead is heated in a cauldron at the top of a 150-160 feet tower, and poured through a copper lattice that divides the metal into falling droplets. As these droplets fall, they spin into small spheres and gradually cool, before finishing in a pool of water at the bottom of the tower. However the maximum size of lead shot, and the economic efficiency of shot tower production, is limited by the practical height of the drop. Larger diameter lead shot must fall further in order to cool evenly and sufficiently to avoid shape distortion on hitting the water at the base. This sample of larger 7 mm lead shot, although mass produced, appears to have been manufactured under the traditional and more labour intensive mould system. They are therefore distinct from the other samples of smaller gauged and shot tower produced lead shot that were being imported on the Loch Ard . In terms of metallurgical technology these 7 mm shot are more closely related to an artifact in our Collection (No. 5241) — a forged set of pincers or pliers with two facing cups at the end. When the pincers are closed, the cups join to form a single mould. Molten lead is poured through a small (circular) opening left at the top of the mould. When cooled the pincers are opened, breaking the mould and releasing the lead shot. The excess metal left over from the pouring operation at the top of the ball is then trimmed off using the scissor like cutting edges on the inner side of the pliers handles. In this manner, individual shooters were able to make their own ammunition for their shotguns. History of the Loch Ard: The Loch Ard got it’s name from ”Loch Ard” a loch which lies to the west of Aberfoyle, and to the east of Loch Lomond. It means "high lake" in Scottish Gaelic.The vessel belonged to the famous Loch Line which sailed many vessels from England to Australia. The Loch Ard was built in Glasgow by Barclay, Curdle and Co. in 1873, the vessel was a three-masted square-rigged iron sailing ship that measured 79.87 meters in length, 11.58 m in width, and 7 m in depth with a gross tonnage of 1693 tons with a mainmast that measured a massive 45.7 m in height. Loch Ard made three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of 29-year-old Captain Gibbs, who was newly married. The ship was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were other items included that were intended for display in the Melbourne International Exhibition of 1880. The voyage to Port Phillip was long but uneventful. Then at 3 am on June 1, 1878, Captain Gibbs was expecting to see land. But the Loch Ard was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4 am the fog lifted and a lookout aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head-on into the wind, the ship lost momentum, the sails fell limp and Loch Ard's bow swung back towards land. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time the ship was among the breakers and the tall cliffs of Mutton Bird Island rose behind. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves subsequently broke over the ship and the top deck became loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of Loch Ard and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as Loch Ard Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael a passenger had raced onto the deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke the open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a complete state of exhaustion, he told the men of the tragedy. Tom then returned to the gorge while the two men rode back to the station to get help. By the time they reached Loch Ard Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. Ten days after the Loch Ard tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of Loch Ard still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some items were washed up into Loch Ard Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced in March 1982. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton majolica peacock- one of only nine in the world. The peacock was destined for the Melbourne 1880 International Exhibition in. It had been well packed, which gave it adequate protection during the violent storm. Today the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artifact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register Ref S 417. Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck. The collections object is to also give us a snapshot into history so we are able to interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. The collections historically significance is that it is associated unfortunately with the worst and best-known shipwreck in Victoria's history. A quantity of forty-nine (49) loose round lead shot of 7 mm diameter retrieved from the wreck of the Loch Ard. All are smooth round spheres with the same small raised square of excess lead on one face.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, shipwreck artefact, shot, lead shot, shot towers, shot mould, colonial imports, practical metallurgy -
Flagstaff Hill Maritime Museum and Village
Dresser
Also called Lead Beater, Lead Dresser or Plumbers' Dresser -Wooden lead beating mallet.13"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and Village
Dresser
Also called Lead Beater, Lead Dresser or Plumbers' Dresser -Wooden lead beating mallet. 11½"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lead beater, lead dresser, plumbers' dresser, beating mallet