Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. 437 Royal St, New Orleans, Lousiana, USADate: / Subject / Encircled 23F (Handwritten)new orleans, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Governor's Palace, Colonial Williamsburg, Virginia, USADate: / Subject / 04819 / D (Handwritten) / Encircled 22F (Handwritten) / Encircled 1 (Handwritten)virginia, usa, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. House under construction, unknown location, USAMade in USA / 2 / Encircled 20F (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Housing, 5th Avenue, Harlem, New York, New York, USAMade in USA / Patented / 04819 / B (Handwritten) / Encircled 18F (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Honolulu with Diamond Head in the background, Hawaii, USAMade in USA / 9hawaii, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Ewing Residence (1957) Coconut Grove, Florida, USA. (Architect: Alfred Browning Parker.)Made in USA / Patentedmit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Memorial Church, Harvard Yard, Harvard University, Cambridge, Mass., USA, 1932 (see also S0411). (Architects: Coolidge, Shepley, Bullfinch & Abbott.)Made in USA / Patentedmit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. House under construction, unknown location, USAMade in USA / 1 / 04819 / B (Handwritten) / Encircled 17F (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Unknown location, USA. Patricia Boyd in the distanceMade in USA / 16mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France.Colour slide in a mount. Parlor of the Brush-Everard House (1718), Williamsburg, Virginia, USAProduced and Sold by Colonial Williamsburg Williamsburg, Virginia, USA. Antique red moreen fabric brightens the Parlor of the Brush-Everard House. Encircled 3 (Handwritten) / Encircled 3 (Handwritten)mit bemis professorship, mit, robin boyd, slide

The polaroid camera was first produced in Massachusetts, U.S.A. in 1937 by Edwin Land. He developed the concept of instant photography following his production of polarized sunglasses. This Sun 660 model was first produced in 1981. Polaroid cameras were very popular in the 1970s and 80s. The Polaroid Company was re-formed several times and sold to The Impossible Project Company in 2017. Instant cameras can still be purchased today. This camera has no known local provenance but is retained for display purposes.This is a Polaroid brand instant camera enclosed in a black case. It has a cloth strap with plastic attachments. It features sonar autofocus technology.Polaroid Sun 660 Autofocus

Brown hardcover book, 787 pagesnon-fictionf p treadwell, professor of analytical chemistry, zurich, william hall, translator, chemistry, quantitative analysis, munitions supply branch library

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. Robin and Patricia Boyd, with their youngest daughter Suzy, were based in Cambridge, Massachusetts for the year. Boyd gave some lectures at MIT and he was also invited to give lectures at many other universities, allowing him to travel widely within the USA, especially on the East Coast. This gave him the opportunity to meet architects like Frank Lloyd Wright, Eero Saarinen, Paul Rudolph and many others, and visit the offices of Skidmore, Owings and Merrill, and places like Taliesin and the General Motors Technical Center Detroit. On the way home, the Boyds visited London, Berlin, Paris and Le Corbusier’s Ronchamp Chapel in France. MIT Bemis Professorship, MIT, robin boyd, slideColour slide in a mount. Unknown location, USAMade in USA / Patented / Encircled 21F (Handwritten)mit bemis professorship, mit, robin boyd, slide

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. During this time, the Boyds purchased this set of melamine kitchen canisters. They were used for flour, sugar, rice and biscuits etc. Both Robin and Patricia liked melamine, and also had melamine serving dishes. Seven melamine containers with coloured exteriors (ranging from white through yellowy-green, orange and black) with black interiors and teak lids. Height ranges from 100-200mm, width ranges from 110-170mm, Base measures 100-155mmcookware, walsh st kitchenware, robin boyd

Typed copies of correspondence dated 21/7/1910, from the Federal Storage Battery Company to the Mr H Milner, Managing Director of the Beaumaris Tramway Co. at the Equitable Building Melbourne. Gives extensive details and comparisons of the battery storage system compared to the electric tramcars. Known as "Beach Cars" - see reference. Notes the work of Edison, batteries. Signed by R. H Beach, the Company Secretary. Has notes on car (streetcar or tramcar) performance, report from the Atlantic City and Shore Railroad Company, comparison report from the Board of Railroad Commissioners for the State of Massachusetts, and cost comparisons. Yields information about the "Beach Cars" battery powered trams of 1910.Set of six typed blue foolscap sheets titled - "Beach Cars" - Edison Storage Batteries 1910tramways, trams, battery tramcars, battery systems, beach cars, beaumaris tramway co. ltd, edison

Robin Boyd developed a close friendship with the founder of the Bauhaus in Weimar Germany, Walter Gropius, who had moved to the USA in the 1930s. Through this connection, Boyd was invited to be the Massachusetts Institute of Technology (MIT) Bemis Professor at the School in the North American academic year 1956-7. During this time, the Boyds purchased this set of Revere kitchenware, which carries the prized "Process Patent" maker's mark on the thick copper bases. Mandie Boyd recalls: "I don’t remember a lot of cooking going on in them, if any, as they were a pain to clean but looked fabulous hanging on the wall absolutely gleaming. We would all check our hair and make up in them."A set of Revere Ware Saucepans and Frying Pans. A set of four Revere Ware copper clad, stainless steel saucepans with lids and black handles and hanging rings. A set of three Revere Ware copper clad, stainless steel pans with black handles and hanging rings. The largest flat one has no lid. Saucepans: largest 175mmx140mm, smallest 120mmx180mm. Frying Pans: largest 350mmx10mm, smallest 80mmx50mm.Revere Ware company engraving. Made under process patent #2363973. 'Revere Ware 1801' 'Patent # 22726091'revere, revereware, revere ware, cookware, walsh st kitchenware, robin boyd, ohm2022, ohm2022_10

Frederick Romberg wrote a personal record of the Grounds Romberg and Boyd partnership (nicknames Gromboyd) and the subsequent Romberg and Boyd partnership, covering 1953-1971 and with some detail for later years up until 1983. The two volumes contain transcripts of a selection of correspondence between the partners, as well as some explanatory text. The first volume covers the establishment of the partnership in 1953 to 1956-57 when Robin Boyd was Visiting Bemis Professor at Massachusetts Institute of Technology. Volume two continues from 1957 covering all the later years – the NGV project, the break-up of the partnership in 1963, the formation of Romberg and Boyd, Robin Boyd's death and Romberg's years in Newcastle (1965-1975) and his return to Melbourne (see item D270).Bound hard cover booklet, with approx 123 foolscap pages, typed photocopy.Title page has "Suzy Boyd 11.1.87 at Boyds' Canberra Weekend 10.1.87-12.1.87. "Added in another hand 'with Mandie, Penleigh & Suzy'".

Frederick Romberg wrote a personal record of the Grounds Romberg and Boyd partnership (nicknames Gromboyd) and the subsequent Romberg and Boyd partnership, covering 1953 - 1971 and with some detail for later years up till 1983. The two volumes contain transcripts of a selection of correspondence between the partners, as well as some explanatory text. The first volume covers the establishment of the partnership in 1953 to 1956-57 when Robin Boyd was Visiting Bemis Professor at Massachusetts Institute of Technology (see item D269). Volume two continues from 1957 covering all the later years – the NGV project, the break-up of the partnership in 1963, the formation of Romberg and Boyd, Robin Boyd's death and Romberg's years in Newcastle (1965-1975) and his return to Melbourne.Bound hard cover booklet, with approx 114 foolscap pages, typed photocopy.

This rod was salvaged from the American three-masted wooden clipper ship, Eric the Red, named after the Viking discoverer, Eric the Red. The ship first traded in coal between America and Britain and later traded in guano nitrates from South America. In 1879 its hull was re-metalled and the vessel was in first class condition. On 10th June 1880 Eric the Red departed New York under the command of Captain Z Allen, with 24 crew plus two passengers. It was heading for Melbourne and then Sydney. The ship was commissioned by American trade representatives to carry a special cargo of 500 American exhibits for the U.S.A. pavilion at Melbourne’s first International Exhibition. The items included furniture, ironmongery, wines, chemicals, dental and surgical instruments, paper, cages, bronze lamp trimmings, axles, stamped ware, astronomical and time globes, and samples of corn and the choicest of leaf tobacco. Also on board was general merchandise such as cases of kerosene and turpentine, brooms, Bristol's Sarsaparilla, Wheeler and Wilson sewing machines, Wheeler’s thresher machine, axe handles and tools, cases of silver plate, toys, pianos and organs, carriages and Yankee notions. The ship had been at sea for 85 days when, on 4th September 1880, it hit the Otway Reef on the southwest coast of Victoria and was quickly wrecked. Captain and crew ended up on floating parts, or in the long boat or the sea. He was amongst the 23 battered and injured men who were rescued by the steamer Dawn and later taken to Warrnambool, where they received great hospitality and care. Four men lost their lives; three crew and one passenger. Captain Allen took the train back to Melbourne and then returned to America. The captain and crew of the Dawn were recognised by the United States Government in July 1881 for their humane efforts, being thanked and presented with substantial monetary rewards, medals and gifts. The salvaging ship Pharos collected Wheeler and Wilson sewing machines, nests of boxes, bottles of Bristol’s sarsaparilla, pieces of common American chairs, axe handles, a Wheelers’ Patent thresher and a sailor’s trunk with the words “A. James” on the front. A ship’s flag board bearing the words “Eric the Red” was found on the deckhouse; finally, those on board the Pharos had found the name of the wrecked vessel. The government steamer Victoria and a steamer S.S. Otway picked up flotsam and wreckage. A whole side of the hull and three large pieces of the other side of the hull, with some of the copper sheathing stripped off, had floated onto Point Franklin. Some of the vessel's yards and portions of its masts were on shore with pieces of canvas attached, confirming that the vessel had been under sail. On shore were many cases of Diamond Oil kerosene labelled R. W. Cameron and Company, New York. large planks of red pine, portions of a small white boat and a large, well-used oar. There were sewing machines, some consigned to ‘Long and Co.”, and notions, axe and scythe handles, hay forks, wooden pegs, rolls of wire, some branded “T.S” and Co, Melbourne”, and kegs of nails branded “A.T. and Co.” from the factory of A. Field and Son, Taunton, Massachusetts. Other cargo remains included croquet balls and mallets, buggy fittings, rat traps, perfumery, cutlery and Douay Bibles, clocks, bicycles, chairs, a flywheel, a cooking stove, timber, boxes, pianos, organs, wooden clothes pegs and a ladder. There were three cases of goods meant for the Exhibition Other items salvaged from amongst the debris floating in the sea were chairs, doors, musical instruments, washing boards, nests of trunks and flycatchers. Most of the goods were saturated and smelt of kerosene. A section of the hull lies buried in the sand at Parker River Beach. An anchor with a chain is embedded in the rocks east of Point Franklin and a second anchor, thought to be from Eric the Red, is on display at the Cape Otway light station. A life belt was once on the veranda of Rivernook Guest House in Princetown with the words “ERIC THE RED / BOSTON”. Parts of the ship are on display at Bimbi Park Caravan Park and Apollo Bay Museum. Flagstaff Hill Maritime Village also has several artefacts from the wreck. There seemed to be no personal luggage or clothing. “The Eric the Red is historically significant as one of Victoria's major 19th century shipwrecks. (Heritage Victoria Eric the Red; HV ID 239) The wreck led to the provision of an additional warning light placed below the Cape Otway lighthouse to alert mariners to the location of Otway Reef. The site is archaeologically significant for its remains of a large and varied cargo and ship's fittings being scattered over a wide area. The site is recreationally and aesthetically significant as it is one of the few sites along this coast where tourists can visit identifiable remains of a large wooden shipwreck, and for its location set against the background of Cape Otway, Bass Strait, and the Cape Otway lighthouse.“ (Victorian Heritage Database Registration Number S239, Official Number 8745 USA)Iron rod with flat lugged washer. The rod is made of a heavy metal with encrustations and signs of rusting on the surface. It is stepped down in diameter mid-shaft and is slightly bowed on the narrower end. The narrow end flares out slightly in the last few centimetres with a burred foot and has a circular head on the wider end. The washer on the narrower end cannot move past the centre or the narrow end of the rod. The washer is a different metal from the rod and has a small lug jutting out along the circumference in one position. The rod was recovered from the wreck of the ship the Eric the Red.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, rod, iron-rod, eric the red, steamer dawn, cape otway reef, 1880, captain allen, usa pavillion, melbourne exhibition, melbourne international exhibition, captain jones, medal, united states government, pharos, a. james, flag board, steamer victoria, steamer otway, diamond oil, r w cameron and company, long and co., t s and co melbourne, a. field and son, taunton, massachusetts, ketch apollo, ship nail

This booklet of sales dockets came from the Youngers Stores in Warrnambool. John Younger came to Warrnambool from Beechworth in 1888 and established a general store in Liebig Street and quickly built up a thriving business. His store was one of the main reasons why Liebig Street became the main shopping precinct in Warrnambool by the beginning of the 20th century. John Younger was active in community affairs and was a Town Councillor from 1902 to 1918 and Mayor of the Town. He died in the 1930s and his store was continued by family members but taken over by Charles Moore in 1958. It closed in the 1980s. The maker of the docket book, Lamson Paragon Limited, was a British firm with factories and offices in Australia and it initially specialized in making sales docket books using a carbon paper process. The original founder of the firm, William Lamson of Massachusetts, U.S.A., was the first to introduce the system of paying for goods in a store using cash balls on tracks. This pad is of some interest as it shows the system of receipts issued by a Warrnambool firm in the 1950s. It is of particular interest coming from Youngers Stores, a major retailer in Warrnambool for over 90 years. This is a pad of dockets stapled together 30 pages). The pages are buff-coloured with red and black printing on every second page. Every second page has been left blank so that a second copy could be kept of every transaction using carbon paper. The pad originally had dockets for 50 transactions for Youngers Stores in Liebig Street, Warrnambool. The first three pages are badly torn. The back of every docket has an advertisement for Youngers stores.Docket front: ‘Phone 21, Terms, Nett Cash, M……………., Younger Pty Ltd, General Merchants, Registered Office, Liebig St., Warrnambool, We Buy for Cash and Sell for Cash, Sold by, Exd. By, Date, Lamson Paragon Limited.’docket book, younger pty ltd, general merchants, department stores, liebig street, warrnambool

1963 – A general in the Army of the Republic of Vietnam, Nguyễn Văn Thiệu participates in the overthrow of President Ngô Đình Diệm 's government. Coup leader General Dương Văn Minh briefly becomes chief of a military junta in South Vietnam. 1964 – Lieutenant General Nguyễn Khánh overthrows Minh to become prime minister. 1965 – Vice Air Marshall Nguyễn Cao Kỳ overthrows Khánh to become prime minister. General Nguyễn Văn Thiệu is his chief of state. 1967 – Nguyễn Văn Thiệu runs successfully to be the second president of South Vietnam. Nguyễn Cao Kỳ is his running mate. 1971 – President Nguyễn Văn Thiệu re-elected. 1973 – The Paris Peace Accords, negotiated without Thiệu’s participation, fails to stop the fighting in South Vietnam. Even so, US and allied troops withdraw. 1975 – On 24 April, with North Vietnamese victory imminent, Thiệu’ resigns as president and the CIA fly him to Taiwan. He then spends most of his exile in London, moving to Massachusetts, USA, in the 1990s. Timber framed image of Nguyen Van Thieu, Second President of Vietnamrepublic of vietnam, president of south vietnam, nguyen van thieu, thieu

A pocket watch is a watch that is made to be carried in a pocket, as opposed to a wristwatch, which is strapped to the wrist.. They were the most common type of watch from their development in the 16th century until wristwatches became popular after World War I The first stem-wind and stem-set pocket watches were sold during the Great Exhibition in London in 1851 and the first owners of these new kinds of watches were Queen Victoria and Prince Albert. Stem-wind, stem-set movements are the most common type of watch-movement found in both vintage and modern pocket watches.In 1857 the American Watch Company in Waltham, Massachusetts introduced the Waltham Model 57, the first to use interchangeable parts which cut the cost of manufacture and repair. Most Model 57 pocket watches were in a coin silver. Watch manufacture was becoming streamlined; the Japy family of Schaffhausen, Switzerland, led the way in this, and soon afterwards the newborn American watch industry developed much new machinery, so that by 1865 the American Watch Company (afterwards known as Waltham) could turn out more than 50,000 reliable watches each year.This silver plated pocket watch with an open glass face has black roman numerals on a white dial , gold hour hands and a blue second hand. The winding stem is at 12 o’clock and has a metal ring for attachment to a chain. Back: of case ; a shield inside 2 circleswatches, brighton, cheltenham, moorabbin, bentleigh, early settlers, pioneers

Charles Platt was born in New York in 1861 and died in 1933. He studied art at the National Academy of Design. In 1880, Charles went to Paris to study landscape painting and, while there, he travelled to Italy with his brother. Though he was influenced by Italian detailing, his designs were not copies of Italian gardens He was known as an architect and illustrator not as a garden designer. In 1880, he trained as an etcher with Stephen Parrish in Gloucester, Massachusetts. He also trained at the National Academy of Design and the Art Students League in New York and later in Paris with Gustave Boulanger and Jules Joseph Lefebvre at the Académie Julian. Charles exhibited his paintings and etchings and gained his first audience in Paris Salon of 1885. Betweem 1880 – 1890 , he made hundreds of etchings of architecture and landscapes. In 1900, Charles received a bronze medal at the Paris Exposition Universelle. In 1907 he designed a townhouse for Sara Delano Roosevelt on East 65th Street in New York. Eleanor Roosevelt called Charles A. Platt "an architect of great taste" who with the townhouse had "made the most of every inch of space." and in 1918, he de­si­gned the Freer Art Gal­lery in Wa­shing­ton. Book, Hard brown Cover. Title on the spine "The work of Charles A. Platt". Manufactural details on spine. Page no. 181. Black & white plates and plans. Stamped on page 43, 93, 123, 135, 161, 171"Picton Hopkins & Sons PTY.LTD"architecture design, domestic architecture, designs and plans, landscape gardening

Shaving soap scuttles are distinguished from shaving mugs by having a separate area for hot water. The hot water is for dipping a shaving brush into to make a lather with the soap which is then applied to the skin before using the razor. Vintage scuttles are often elaborately decorated. Between 1880 and 1920 is the original time period for the occupational shaving mug. Most men owned a shaving mug, either at home or at a barber shop. Mugs purchased for home use typically were purchased through local stores, had more variety in style but usually went without a name. Barber shops sold mugs with the owners’ names on them partly because they thought that shaving rash came from sharing the same soap. In reality, the rash was not a result of soap but of unsterilized razors. Transfer ; The Duryea Motor Wagon was among the first standardized automobiles and among the first powered by gasoline. Fifteen examples were built by the Duryea Motor Wagon Company of Chicopee, Massachusetts, between 1893 and 1896. Their enterprise followed the first commercially available automobile which was patented by Karl Benz on January 29, 1886, and put into production in 1888. The Duryea Motor Wagon remained in production until 1917. The Duryea brothers entered their horseless carriage in many shows and races. A china shaving mug / scuttle with a car transfer. The mug has a wide spout to hold / insert the shaving brush , a perforated tray opening at the top to hold the soap and a bulbous base for the hot water. car transfershaving equipment, safety razors, cheltenham, early settlers, moorabbin, shaving soap sticks, shaving brushes, shaving scuttles, shaving rash, infectious diseases, barber shops,

Specification document comprising printed cover, eight typewritten pages (black carbon copy) and two photo pages of a J.G. Brill Co. of Philadelphia PA, Birney Safety Car. Specification No. 100, revised 1/10/1919. On the printed cover, which has three holes for a clip on the left hand side, printed with the Birney Safety Car trade mark, the names of the J. G. Brill associated companies (American Car Company of St. Louis, G. C. Kuhlman Car Co. of Cleveland Ohio, and Wason Manufacturing Company of Springfield, Massachusetts). On the inside of the front cover and on the outer back cover is the Brill logo. On the inside of the back cover is a floor / seating plan of the Birney Safety Car, giving overall dimensions, location of equipment etc. Item secured with one brass clip in the top left hand corner. The eight typed pages details the specification of the construction of the tramcar, equipment details etc for a single truck, double end Birney Safety (tram) car. Gives dimensions of the tramcar, materials, construction methods, finishes, equipment, glass, etc. Also details additional items that could be ordered with the tramcar. First photo shows the Birney car without a trolley pole, lettered for the KC Rys. Co. The second photo shows an interior view of the tramcar. Scanned for COTMA Website - pdf version.trams, tramways, birney, j. c. brill co., tramcar specifications, tramcar construction

Catalogue No. 206 of the J. G. Brill Co. of Philadelphia PA, titled "Brill Trucks" on front cover and "City and Interurban Trucks" on page 1. Comprises: Card cover very light grey on outside, grey inside which is a larger size than that of the rest of the book. Has the names of the J. G. Brill associated companies (American Car Company of St. Louis, G. C. Kuhlman Car Co. of Cleveland Ohio, Wason Manufacturing Company of Springfield, Massachusetts and Compagnie J. G. Brill, Paris France) as well. On the inside of the front cover and on the inside back cover are patterns involving the Brill logo. To the printed catalogue is a matching out 4pp again with the same Brill logos. This sheet is the same size as the text pages. Forty page printed text on a heavy gloss manila colour art paper. Front cover gives details of Brill's office addresses, and agents, including the Australasian agent - Noyes Brothers. Page 3 gives an introduction to the quality of Brill trucks and page 39 gives an index to the various trucks and components. Each truck type has a photograph, parts list and dimension details. Trucks covered are: Radiax, 21E, 22, 22E, 27E, 27F, 27G, 27MCB, 39E, 50E. Equipment detailed are the Half-Ball brake hanger, oil retaining center bearing, standard journal (axle) box, solid forged side frames and axle data. Page 38 details the information to be provided when ordering trucks. Image of each sheet added 25/3/2015.On front cover, date stamp of ESCo, Ballarat "1 Apr 1914". The printers signature is shown on page 40.trams, tramways, 21e trucks, 22e trucks, j. c. brill co., bogies, interurban

Thomas James Smith opened a small pharmacy in Hull, England in 1856. On his death in 1896, his nephew Horatio Nelson Smith took over the management of the business. Smith & Nephew plc is a British-based multinational medical equipment manufacturing company headquartered in London, United Kingdom. It is the world's largest producer of arthroscopy products, second-largest producer of advanced wound management products, third-largest producer of trauma and clinical therapy products and fourth-largest producer of orthopaedic reconstruction products. Its products are sold in over 90 countries with 11,000 employees. In 1928 the company developed the wound management product Elastoplast, recorded in Medical Journals worldwide. Since 1998 Smith & Nephew operates in three market segments through separate "global business units" under the Smith & Nephew brand name: Advanced wound management: advanced treatments for difficult wounds. Endoscopy: products for minimally invasive surgery, based in Andover, Massachusetts. Orthopaedics: hip and knee implants and trauma products, based in Memphis, Tennessee. Smith & Nephew was incorporated and listed on the London Stock Exchange in 1937 and in 1999 the Group was also listed on the New York Stock Exchange. In 2001, Smith & Nephew became a constituent member of the FTSE-100 index in the UK. This means that Smith & Nephew is included in the top 100 companies traded on the London Stock Exchange measured in terms of market capitalisation. .Today, Smith & Nephew is a public limited company incorporated and headquartered in the UK and doing business in 90 countries around the world. A tin cylinder with a lift off lid for ‘Cellona’ Plaster of Paris bandage, 3 inches wide x 4 yards long, made by Smith & Nephew Ltd, Hull, England mid 20thCLid - CELLONA / BPC Front - CELLONA / TRADE MARK / U.K. PATENT 385,658 / THE NEW AND IMPROVED / PLASTER of PARIS / BANDAGE / READY FOR USE / 3INS. 4 YDS. Back - ADVANTAGES …….. / DIRECTIONS………/ Made in England by T.J.SMITH & NEPHEW LTD. / LONDON, HULL, MANCHESTER, GLASGOW/ MAKERS OF ELASTOPLAST.* pharmacy, medicines, smith & nephew pty ltd, hull england, london england, plaster of paris, elastoplast, hospitals, nursing, wound dressings, orthopaedics, glassware, bottles, moorabbin, bentleigh, cheltenham

Stewart MacFARLANE (1953- ) Born Adelaide, South Australia Stewart MacFarlane entered the South Australian School of Art when 16 years of Age. He traveled to New York in 1975 to study at the School of Visual Arts for 2 years. He remained living and working in New York for several years, receiving residences and fellowships to Skowhegan School of Sculpture and Painting in Maine, the Fine Arts Work Center in Provincetown, Massachusetts and the MacDowell Colony, New Hampshire. He exhibited in group shows as well as having three solo exhibitions in New York. Firstly at Razor Gallery, SoHo in 1979, then Belanthi Gallery in 1979 and the Australian Consulate New York in 1983. MacFarlane returned to Australia in 1983, undertaking post-graduate studies at the Victorian College of the Arts in 1984. He taught at The Gippsland Institute of Advanced Education (now Federation University Gippsland Campus) in 1885, and the following year moved to Darlinghurst, Sydney to paint. Later that year, he was artist-in-residence in the Besozzo Studio, Italy. In 1987, MacFarlane lived and painted in Mornington, Victoria for several months before receiving an initial residency with the Roswell Artist-in-residence program, New Mexico, for a year. Over the next eight years he moved between Melbourne, Sydney and Roswell, producing one or more solo exhibitions each year. In 1994 he received a residency at The Bemis Center, Omaha, Nebraska, then traveled to Mexico to paint for 3 months. MacFarlane worked in Queensland upon his return, and for the next seven years. He moved to Hobart, Tasmania in 2002, returning to the mainland in 2011.(http://www.stewartmacfarlane.com/bio-cv/) A framed linocut. This linocut was one of the Patron Print Series produced as a fundraiser to assist Gippsland School of Art students.printmaking, artist, artwork, gippsland campus, stewart macfarlane