Showing 5722 items
matching steam-engine
-
Greensborough Historical Society
Container, Champion Sparking Plug Co. Ltd, Champion Spark Plugs, 1950s
This containerswould have contained Spark plugs for internal combustion enginesHinged metal container, lid printed in blue and white"Extra range Champion Spark plugs Made in England"container, spark plugs -
Moorabbin Air Museum
Manual (item) - CAC Mirage ATAR 09C Engine Service Bulletin Copy 7, C.A.C. "ATAR" Service Volume I
The ATAR 09C engine was used in RAAF Mirage III aircraft -
Moorabbin Air Museum
Manual (item) - CAC Mirage ATAR 09C Engine Service Bulletin Copy 7, C.A.C. "ATAR" Service Volume II
The ATAR 09C engine was used in RAAF Mirage III aircraft -
4th/19th Prince of Wales's Light Horse Regiment Unit History Room
Document, 4th/19th Prince of Wales's Light Horse Regiment, Cars Armoured Staghound DONT'S, 1960's
A single page listing 16 things not to do with regard to the Staghound, such as - "Don't start the engines before carrying out first parade service", and, "Don't traverse the turret unless the turret lock is fully disengaged"staghound armoured car -
Tatura Irrigation & Wartime Camps Museum
Photograph, Peter Mueller, 1940
Black and white photograph of Peter Mueller standing in front of a hut covered in foliage. On a table is a 4 engined model plane, passenger, black and white with D-Alva on the plane and the swastika on the perpendicular tail section.D-Alva Swastika peter mueller, model planes, camp 13 -
Bendigo Historical Society Inc.
Photograph - JORDAN COLLECTION: BENDIGO RAILWAY STATION, 20th December, 1981
Colour photo of Bendigo Railway Station taken on 20 December 1981. The presence of two cranes indicates that Engine R711 being removed from one set of tracks and placed on tracks into the gardens at the station.bendigo, tourism, railway station -
Bendigo Historical Society Inc.
Document - BADHAM COLLECTION: LETTER TO R. HUDDLE, RE SENIORITY OF DRIVERS TO SPECIAL CLASS
Document: carbon copy of letter from C. Collins, General Secretary, to R. Huddle, Branch Secretary, Bendigo, dated 2nd. October, 1939, re special class engine drivers and seniority, and pay.organisation, union, a.f.u.l.e., huddle, collins, drivers, engine drivers, victorian railways, union -
Bendigo Historical Society Inc.
Document - MINING REPORTS - GT. NORTHERN WINDING ENGINE
Handwritten qute from the Sec. Mines Report for 1901 Page 79 by E. R. Meekison, Senior Inspector of Mines. Quote gives a detailed description of the winding engine manufactured by Messrs. Roberts and Sons.document, gold, mining reports, mining reports, gt northern winding engine, sec mines report for 1901 page 79, e r meekison, messrs roberts and sons, a richardson -
Bendigo Historical Society Inc.
Photograph - A.HARKNESS + CO, C 1907
Sepia toned, mounted on green board. Interior of engine room, showing machines with large pistons, drive shafts and fly wheels. Inscription: plague on front of machine 'A. Harkness & Co | Engineers | 1907 | Bendigo'.A. G. Levy, (Eaglehawk photographer)organization, business, a.harkness + co -
Puffing Billy Railway
Lister Auto Truck
The Lister Auto-Truck was a small monowheel tractor built for moving light loads around factories, railway yards and similar sites. They were built by R A Lister and Company of Dursley, Gloucestershire, well known for their range of small stationary engines The Auto-Truck was one of several monowheel tractors to appear in the 1920s and '30s, with the availability of small, reliable petrol engines, as developed for motorcycles and the stationary engines for which Lister were already known. These were tricycle vehicles, with the single leading wheel used for both drive and steering. Their simple construction carried most of the mechanism on this wheel as a single unit, the chassis with the trailing wheels being little more than a trailer for balance. Simplicity was a key feature. The engines were single-cylinder and air-cooled. Ignition was by magneto, rather than requiring a battery and electrical system. One of these designs was produced in the 1920s by George Grist of the Auto Mower Co., Norton St Philip, Somerset. The engine was a JAP 600 cc four-stroke air-cooled sidevalve, a typical small engine of the time. The Auto Mower Co. were Lister agents and when Lister heard of this 'Auto-Truck' they bought one for use in their own factory. It was used to carry heavy engine castings from the foundry to the machine shop. Lister customers saw them and there was such interest in wanting to buy them that Lister negotiated with Auto Mower to build them under licence. Although Lister were already well known for their small petrol stationary engines, these were heavy cast-iron engines with water hopper cooling and unsuitable for vehicle use. Lister remained with the JAP engine for the Auto-Truck. The Auto-Truck was designed for use in factories or other places with smooth surfaces of concrete or tarmac. This allowed the use of small solid-tyred wheels with only simple suspension, making the vehicle simple, cheap and lightweight. They had little ability on soft surfaces though and could even topple over if driven carelessly across slopes. Their design was a compromise between the top-heavy nature of the tall engine grouping above its wheel and a well thought-out chassis for stability. The bearing between them was a large diameter ring roller bearing, mounted at the lowest part of the chassis. This gave rigidity and stability, even after long wear. A ring of rolled channel girder was attached to the engine group and rollers on the chassis carried the load upon this. On early Auto-Trucks this bearing is set very low, in line with the chassis members, and is covered by thin steel plates. The front panel of the engine cover is distinctive with large ventilation holes and a Lister signature cut through it. Strangely this panel is made of thick cast iron, providing substantial weight high on the engine and only adding to its top heaviness. To improve visibility of moving vehicles in noisy factories, this panel was often painted white, the rest of the vehicle being Lister's usual brunswick green. The driver was seated on a Brooks bicycle saddle, which in recognition of the lack of vehicle suspension, was carried on the end of a cantilevered bar that acted as a leaf spring. A wide handlebar on the engine group was used for steering. A squeeze bar the width of this handlebar engaged the clutch. Controls included a hand throttle, a gear lever with two forward and one reverse gears, and a large handbrake lever. The engine unit rotated freely for a full 360° rotation. When used in reverse, the Auto-Truck could either be driven from the saddle, looking backwards over the driver's shoulder; or they could dismount, swivel the engine unit around and control it as a pedestrian-controlled truck from behind. Under the engine cover were two equal diameter tanks, a fuel tank for petrol and a shorter oil tank. Engine and chain-drive lubrication used a total-loss oil system, controlled by a small pump and needle valve. Info Ref: Lister Auto-Truck - Wikipedia https://en.wikipedia.org/wiki/Lister_Auto-TruckHistoric - Industrial monowheel tractor for moving light loads around factories, railway yards and similar sites.The Lister Auto-Truck - small monowheel tractor Made of steel with three wheels. Powered by a J.A.P single cylinder petrol motor which is Hand Cranked to start.Lister puffing billy, lister, lister auto truck, monowheel tractor -
Victorian Interpretive Projects Inc.
Photograph - Black and White, Ballarat, c1854
The town you see had over 50,000 people. Bridge Street on the left is well established. The crude pans and cradles of the early “diggers’ were already giving way to steam power and the deep shafts of the “miners”. Money and machinery were needed to get to the deeper leads, and the smoke stacks of the great company mines can be seen across the photo.Four black and white photographs placed together to make a panorama of Ballarat looking towards Mt Warrenheip. On the left the chimney and gasometer indicate the corner of Dana Street and Albert Street. This is now the Ballarat Law Courts. The photograph is behind glass in a black frame. These four photographs were taken from the slope of the Ballarat School of Mines where the Uniting Church now stands. When joined they give a panoramic view of one of the world’s richest alluvial goldfields. The Waterloo Mine was one of the first deep shafts and was sunk at the foot of the Dana Street hill. Its tailings are seen in the second photo from left. The following was typed and placed with the framed image. Ballarat Circa 1858 This is the most significant of the photographs of early Ballarat. The photographer stood on the slope near S.M.B. where the Wesley Church now stands and took four pictures. When joined them have this panoramic view of one of the world's richest alluvial goldfields. Seven years earlier this landscape was empty. The town you see had over 50,000 people. Bridge Street on the left is well established the Ballarat gas Company stands on the same place as today. The crude pans and cradles of the early "diggers" were already giving way to steam power and the deep shafts of the :"miners". Money and machinery were needed to get to the deeper leads, and the smoke stacks of the great company mines can be seen across the photo. The Waterloo mines was one of the first deep shafts and was sunk at the foot of the Dana Street hill. Its tailings are seen in the second photo from the left. ballarat, ballarat townscape, panorama, waterloo mine -
Bendigo Historical Society Inc.
Map - BENDIGO HISTORICAL SOCIETY COLLECTION: EAGLEHAWK MINE MAP
Base map Australian map grid of Eaglehawk area. Map has letter attached from the Department of Conservation, Forests and Lands, 22 March, 1990, addressed to Felicity Kingerlie, BHS, requesting information regarding the historic mining sites marked on the map. Sites marked are: A. Golden Age Mine, engine mountings present B. Johnson's No. 2 Mine, engine mountings, old boiler foundations C. Johnson's No. 1 Mine, mullock retaining wall made from sandstone, engine mountings, remains of old building demolished? D. Toma's Eucalyptus Factory, old boiler still there, boiler shed, chimney (remnants of) outlet drain, distilling vats, dam, remnant of winch. E. New Argus Mine,mullock heap F. New Moon Mines Dams (1) stone walls G. North Lightning Hill Mine, engine mountings, quartz retainer wall, Pascoe and Simmons open cuts and other open cuts here too H. New Prince of Wales Mine and Poppet Head I. Quarry site for stone, excavation (for miners cottages in Clarke Street) J. Lancashire open cut mine K. Virginia Hill (cynaide vats etc) L. South Prince of Wales mine, now capped and fenced M (possibly ) Catherine United Mine, engine mountings, battery mountings?bendigo, mining, eaglehawk mines -
Queenscliffe Maritime Museum
Functional object - Signal Lamp
This signal lamp was originally fitted on the steam tug 'Wattle'RAN Career 1932 to 1969: Wattle's construction and career as a non-commissioned vessel of the Royal Australian Navy. Saved from the Scrapyard 1969 to 1979: Sydney-based enthusiasts rescue Wattle from the scrapyard, forming an association with Sydney Heritage Fleet. Melbourne Pleasure Steamer 1979 to 2007: A volunteer group brings Wattle to Melbourne to restore, then sails Port Phillip on outings and excursions. Restoration Journey 2007 to 2015: Wattle is hoisted onto the hard to undergo major restoration work. Back in the Water, 2015 to present: Wattle returns to the water for further restoration, and in 2019 sails again on Port Phillip.Brass candle powered signal lamp with a lens circumference of 14cm, mounted on a timber plinthSundercombes Patent Eclipsesignal light, marine fittings, steam tug 'wattle' -
Eltham District Historical Society Inc
Photograph, George Coop, Railway turntable, Ararat Locomotive Shed, c.1971
Steam locomotives J-549 and K-163 in distance.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, ararat locomotive shed, j-549, j-class steam locomotive (vulcan foundry), k-163, k-class steam locomotive (vr newport workshops) -
Numurkah & District Historical Society
Tin Steam Locomotive
Red and black coloured tin steam locomotive, with gold lining. Two small and three large tin wheels on either side. Wind-up key on one side. Wind-up mechanism doesn't workGold printed number: 659 on both sidestoys, children, presents, tin, locomotive, train -
Canterbury History Group
Drawing - Illustration, Early Canterbury, 1882
Drawing by William Tibbits of Early Canterbury including a steam train and four carriages, Canterbury Railway Station , Shrublands and the Station master's house. 1882. Published with an article, in the Camera Supplement of "The Argus", 6 August 1932.canterbury, shrublands, canterbury railway station, rochester road, canterbury road, balwyn road, trees, tibbits> william -
Glenelg Shire Council Cultural Collection
Photograph - Photograph - Steam Packet Inn, 1960-1979
Black and white photo. Front view of Steam Packet Inn. Woman holding small child behind front fence. Small boy and girl outside fence. Dress late 19th, early 20th century. -
National Vietnam Veterans Museum (NVVM)
Card, Business Card, Lien Thanh Shop
We stock all goods you need. We receive laundry here and make your clothes steam. We supply ice. We clean you to shop here. 3rd Stall From the MarketRecovered from an abandoned bunker systembusiness card, psycological warfare, propaganda, nva/vc -
Mission to Seafarers Victoria
Photograph - Photograph, Black and white, Reverend John Reginald Weller, On the Australian Wharf, c. 1925
Black and white photograph with a thin white border depicting the Australian wharf: two horses, steam ship, two men one siting on a barrel. Across the Yarra river: docks and in the background, the Robur Tea House.Stamps: In purple ink: Herschell's Print, Pathe Agents / in blue ink: "384" Handwritten in black ink and in pencil: "6" australian-wharf, yarra-river, robur tea house, weller album -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Postcard, Bulmer H D, 1910
1 x enlargement 18 x 25. Donated by Stratford Historical Society with inscription Gippsland Lakes near Kalimna HotelBlack and white post card showing SS Wyralla steaming west below Jemmys Point, Kalimna. Rigby Island on left, looking towards Metung, tall trees on cliff in front. Lakes Entrance VictoriaGippsland Lakes from Jemmys Point -
Bendigo Historical Society Inc.
Newspaper - JENNY FOLEY COLLECTION: HARD WORK
Bendigo Advertiser ''The way we were'' from 2003. Hard work: steam dragline excavating silt from the Waranga Basin to supply water to the Rodney district during the 1938-39 drought. The clip is in a folder.newspaper, bendigo advertiser, the way we were -
Bendigo Historical Society Inc.
Photograph - BASIL MILLER COLLECTION: STEAM TRAM, late 1800's
Black and white copy of steam tram no 5 parked in Railway Place, in front of Goods sheds. Conductor (centre) and motorman (right) 2 other men in period attire. Signage on tram for Henderson and Goodison, Beehive.unknownperson, individual, basil miller -
Bendigo Historical Society Inc.
Newspaper - JENNY FOLEY COLLECTION: WINDING WINCH
Bendigo Advertiser "The way we were" from 1999. Winding Winch: a steam driven winding winch for a mine, circa 1920. This particular model was made by Hollands Foundry of whom W.J. Holland was a consulting engineer.newspaper, bendigo advertiser, the way we were -
Bendigo Historical Society Inc.
Photograph - KELLY MINE MODEL IN EASTER PROCESSION
Copies (2) of original photo: Print attached to back of photo : Mr. Fred Kelly ( in uniform ) with his complete working model of a mine which took part in the Easter Procession for many years. Mr. Kelly built the mine himself, and included a small steam engine to drive the stampers and make the cage go up and down. The mine was formerly on show upstairs in the Town Hall, and is now at the Deborah mine museum. Written on bottom of photo in black biro : Valda Pinder 54435593 Photo shows 6 seated men, one standing and one driving horse driven cart with mine model on cart. Two white horses drawing cart. Streetscape in background.bendigo, mining, kelly mine model -
Moorabbin Air Museum
Machine - SNECMA ATAR 13,000 Lbs Of Thrust Turbo Jet
Historical Details: . Description: The Atar jet engine was designed and built in France and was developed from the wartime German BMW 109 003 engine. It powered a number of aircraft types, the most notable of which was the Dassault Mirage. The Atar was built in Australia by the Commonw. Level of Importance: State -
Flagstaff Hill Maritime Museum and Village
Equipment - Dentist Drill, Late 19th century
The design of this and other similar treadle powered dental engine (or dentist drill) was in common use by dentists from the 1870’s into the 1920's. When electricity became accessible to most communities the electrically powered dental engines began to take over from the treadle power. Over the ages teeth were extracted using picks and scissors and other gouging instruments. Bow drills, hand drills and even a "bur thimble" drill were later used to prepare cavities for filling. Some drills were made bendable by attaching flexible shanks between the metal bur and the handle, giving access to the teeth at the back of the mouth. Other mechanical devices were introduced along the way, such as clockwork drills, but they were hard to handle and inefficient. Over the centuries “dentistry has been performed by priests, monks and other healers. This was followed by barbers; the barber’s chair may well have been the precursor to the dental chair. “(SA Medical Heritage Society Inc.) In 1871 James Morrison patented the first commercially manufactured 'foot treadle dental engine', the first practica dental engine although others had been introduced as early as 1790 (by John Greenwood). Handmade steel burs or drills were introduced for dental handpieces, taking advantage of the significant increase in the speed of the drill. In 1891 the first machine-made steel burs were in use. The treadle drill reduced the time to prepare a cavity from hours to less than ten minutes. In 1876 the Samuel S. White Catalogue of Dentist Instruments listed a 12 ½ inch wheel diameter dental engine, with 14 bright steel parts, for sale at US $55 In today’s market, this is the equivalent to US $1200 approx. The specifications of that dental engine are very similar to the this one in our Flagstaff Hill Maritime Village’s collection. It is interesting to note that workings of a similar treadle dentist drill were used and modified to power a treadle spinning wheel of one of the volunteer spinners at Flagstaff Hill Maritime Village. The foot treadle dental engine was a milestone in dental history. “Historic importance of treadle powered machines; they made use of human power in an optimal way” (Lowtech Magazine “Short history of early pedal powered machines”) The invention of a machine to speed up the process of excavation of a tooth lead to the invention of new burs and drills for the handpieces, improving speed and the surgical process of dentistry. They were the fore-runner of today’s electrically powered dental engines. This treadle-powered dentist drill, or dentist engine, is made of iron and steel and provides power for a mechanical dental hand-piece that would be fitted with a dental tool. The drill has a three footed cast iron base, one foot being longer than the other two. A vertical C shaped frame is joined into the centre of the base, holding an axle that has a driving-wheel (or flywheel) and connecting to a crank. A slender, shoulder height post, made from telescoping pipes, joins into the top of this frame and is height adjusted by a hand tightened screw with a round knob. On the post just above the frame is a short metal, horizontal bar (to hold the hand-piece when it is not in use). A narrow tubular arm is attached to the top of the stand at a right angle and can move up and down. At the end of the arm is a firmly fixed, flexible rubber hose protected for a short distance by a sheath of thin metal. At the end of the hose there is a fitting where the drill’s hand-piece would be attached; a small, silver coloured alligator clip is also at the end. A treadle, or foot pedal, is hinged to the heel to the long foot of the base, and joined at the toe to the crank that turns the driving-wheel. There is a spring under the toe of the treadle. The metal driving-wheel has a wide rim. Touching the inside of the rim are four tubular rings that bulge towards the outside of the driving-wheel, away from the pole, and all meet at the hub of the axle. The axle is bulbous between the inside of the driving-wheel and the frame then passes through the frame and is attached on the other side. The driving-wheel has a groove around which a belt would sit. The belt would also fit around a pulley on the arm, at the top of the post. The pulley is joined to a rod inside the arm and this spins the drill's hand-piece and dental tool holder. The two shorter feet of the base are made from a long metal bar that has been curved outwards, and its centre is bolted to the base of the pole. Under the ends of the curved legs of the base are wedge shaped feet. The driving-wheel is decorated in light coloured paint on both sides, each side having three sets of floral decals evenly spaced around them, and each about a sixth of the wheel's circumference. Similar decoration is along the sides of the frame. The foot pedal has decorative cutout patterns in the centre of the foot and at the toe. On the long foot of the stand is some lettering with a fine, light coloured border around it. The lettering is hard to read, being a dark colour and flaking off. There are also remnants of fine, light coloured flourishes. The foot pedal has lettering of the maker’s trade mark cast into the metal at the ball of the foot. Lettering on the base is peeling and difficult to read. The foot pedal has a trade mark cast into it that looks like a combination of ‘C’ , ‘S’ , ‘A’, ‘R’. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dentist, teeth, dental drill, dental engine, treadle drill, foot powered drill, treadle engine, orthodontics, dental surgery, james morrison -
Moorabbin Air Museum
Manual (item) - Mirage III ATAR 09C Engine General Revision 11, ATAR 09C Revision Generale 11, Accessoires
French-language illustrated parts list for the Mirage's ATAR 09C engine. -
Moorabbin Air Museum
Manual (item) - Pratt & Whitney Twin Wasp R1830 Manual, Twin Wasp Maintenance Manual
Parts catalogue for Pratt and Whitney R-1830-C3G and -92 engines. -
Moorabbin Air Museum
Book (Item) - Mirage Iiie Stressing Data Book Ii Wing Stress Analysis
Description: Mirage ATAR Engines - Quality Engineering Reports Level of Importance: . -
City of Ballarat Libraries
Photograph - Card Box Photographs, Inside the Locomotive Dept, Ballarat East 1960
The engines that can be seen are R769, R756 and R712. From the ARHS archives.locomotive, train, vehicle, ballarat east, transport, arhs