Used on a farm in the late 19th or early 20th century.A pair of shaped steel horse hames which are linked together by a five links chain at the top to two rings. There are two large flat steel hooks attached to the sides with bolts, nuts and rivets and it has two metal rings at the bottom. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.Indicipherable inscriptionhorses, horse accessories, harness, animal accessories, farm equipment, hames

A mustard plastic folder with four steel rings holding many white pages printed on one side only. Written by J. R. Anderson, Education Officer for the Soil Conservation Authority. Published Nov. 1979 The folder also includes 17 colored slides held at the front by a clear plastic pocket.soil conservation authority, upper kiewa valley, j. r. anderson, education for seniors

This medical / hospital instrument was used in the Tawonga District General Hospital which was built in the 1950s specifically for the increase in population due to the Kiewa Hydro Scheme.Historical: Shows the development of scientific hospital equipment. Provenance: Used in the Tawonga District General Hospital which was remote and therefore required good equipment. Good condition and good interpretation capacity. In a sealed sterilised bag. Large scissor like steel instrument with 2 loose identical parts. Handle end is controlled by teeth. Pivot has a screw protruding out. Instrument end is flat with a key hole at each end. Loose bits are 3 sided with a hook like attachment on 1 side. medical instrument. hospital equipment. speculum. abdominal. tawonga. mt beauty.

Possibly acquired by seafarer Mr Arthur Dixon who served in WW2 merchant vessels. The origin of the lighters appears to be Austria and could have been acquired either during or post his war service. Initial research indicates an approximate date of 1950s for date of manufacture.See Donor details 1727-1737.2 Small, cylindrical, fluted, polished, stainless steel cigarette lighters, with flint action. Includes a flint gauge in the ignition unit. Runs on lighter fuel, with inbuilt wick. Accompanying bronze coloured metal case of flints. Manufacturer name embossed on body. Lid incised with cylindrical grip of 4 ridges. Lighter1: PATENT/BORA/EXTRA/MADE IN/AUSTRIA (stamped alongside body of lighter) Lighter2: PATENT/Made/in/Austria/902. At right angles at base of lighter, REL Flints: Thorens (stamped in brand name logo style on body at right angle to lid)cigarette lighters, smoking accessories, arthur dixon, bora cigarette lighter, arthur oswald dixon, sailors, seafarers, seamen, officers, smoking, lighters, bora

Dividers are used by navigators to measure the distance between two points on a map or chart. Each point of the divider is places on a map point, then the distance between the points of the divider is measured against the scale of the chart or map. This helps determine the ship's path of travel, the distance travelled and the current location.Not very significant as not associated with any historical event or person, same pattern of dividers is available today from many retail outlets. Also item was probably made around 1940s to 1950sDividers; brass navigator's dividers with fine, stainless steel points. Made in Britain by W & H C (inscription). This navigational tool is used by a ship's navigator to mark the ship's position. Each end point of the divider is placed on a position on a chart or map, then the length between the points of the divider is measured on the chart's scale.Inscribed "British Made" and "W & H C". flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, navigational dividers, navigational tool, dividers made by w & hc, w & hc britain

The husband of the donor of this mast collar chanced to be staying a night at a motel in Peterborough, along the Great Ocean Road in Victoria. He had a keen interest in maritime items and recognise the mast collar at the motel’s back fence line. The motel owner told his guest the story of a customer, a doctor, who had organised and paid for divers to raise the mast collar from a local shipwreck, the Falls of Halladale. Shortly afterwards the doctor passed away, so the mast collar had remained at the motel site. The owner was leaving the motel the following week and wasn’t at all interested in the artefact. He was very happy for his guest to remove it. It took five men to load the mast collar up for the trip to the new owner’s two storey shed in Ballarat. It stayed there undercover, in the company of his collection of 5 buggies, for the next 40 or so years until the property was for sale. A friend, who realised the significance of the mast collar, suggested that it be donated to Flagstaff Hill Maritime Village where other artefacts from the Falls of Halladale, such as the slate tiles, were on display. This mast collar, or masthead, from the Falls of Halladale would have been used to join two sections of one of the tall masts. As sailing ships became larger there was a need for taller masts or spars, which became difficult or impossible to find. To overcome this problem mast was divided into sections; lower and top or upper mast (on some of the ‘tall ships’ a mast could be divided into three or even four sections). The Falls of Halladale was a four-masted British barque built-in 1886. On what turned out to be her fatal journey, she had left New York for Melbourne in late 1908. She ran aground on a reef close to the shore west of Peterborough, South West Victoria, on November 14th. All 29 crew eventually landed safely onshore. The wrecked ship stayed on the reef for several months as locals watched the sails slowly deteriorate. The salvaged cargo included slate tiles, as mentioned above, and many of these have been used on the roof of buildings at the Flagstaff Hill Maritime Village. The iron-hulled, four-masted barque, the Falls of Halladale, was a bulk carrier of general cargo. She left New York in August 1908 on her way to Melbourne and Sydney. In her hold, along with 56,763 tiles of unusual beautiful green American slates (roofing tiles), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6500 gallons of oil, 14400 gallons of benzene, and many other manufactured items, were 117 cases of crockery and glassware. Three months later and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland at 3 am on the morning of the 15th of November, 1908. The captain and 29 crew members all survived, but her valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. ABOUT THE ‘FALLS OF HALLADALE’ (1886 - 1908) Built: in1886 by Russell & Co., Greenock shipyards, River Clyde, Scotland, UK. The company was founded in 1870 (or 1873) as a partnership between Joseph Russell (1834-1917), Anderson Rodger and William Todd Lithgow. During the period 1882-92 Russell & Co., standardised designs, which sped up their building process so much that they were able to build 271 ships over that time. In 1886 they introduced a 3000 ton class of sailing vessel with auxiliary engines and brace halyard winches. In 1890 they broke the world output record. Owner: Falls Line, Wright, Breakenridge & Co, 111 Union Street, Glasgow, Scotland. Configuration: Four masted sailing ship; iron-hulled barque; iron masts, wire rigging, fore & aft lifting bridges. Size: Length 83.87m x Breadth 12.6m x Depth 7.23m, Gross tonnage 2085 ton Wrecked: the night of 14th November 1908, Curdies Inlet, Peterborough south west Victoria Crew: 29 The Falls of Halladale was a four-masted sailing ship built-in 1886 in Glasgow, Scotland, for the long-distance cargo trade and was mostly used for Pacific grain trade. She was owned by Wright, Breakenridge & Co of Glasgow and was one of several Falls Line ships, all of which were named after waterfalls in Scotland. The lines flag was of red, blue and white vertical stripes. The Falls of Halladale had a sturdy construction built to carry maximum cargo and able to maintain full sail in heavy gales, one of the last of the ‘windjammers’ that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck stormy conditions. This idea is still used today on the most modern tankers and cargo vessels and has proved to be an important step forward in the safety of men at sea. On 4th August 1908, with new sails, 29 crew, and 2800 tons of cargo, the Falls of Halladale left New York, bound for Melbourne and Sydney via the Cape of Good Hope. The cargo on board was valued at £35,000 and included 56,763 tiles of American slate roofing tiles (roof slates), 5,673 coils of barbed wire, 600 stoves, 500 sewing machines, 6,500 gallons of oil, 14,400 gallons of benzene, plumbing iron, 117 cases of crockery and glassware and many other manufactured items. The Falls of Halladale had been at sail for 102 days when, at 3 am on the night of 14th November 1908, under full sail in calm seas with a six knots breeze behind and misleading fog along the coast, the great vessel rose upon an ocean swell and settled on top of a submerged reef near Peterborough on the south-west Victoria’s coast. The ship was jammed on the rocks and began filling with water. The crew launched the two lifeboats and all 29 crew landed safely on the beach over 4 miles away at the Bay of Islands. The postmistress at Peterborough, who kept a watch for vessels in distress, saw the stranding and sent out an alert to the local people. A rescue party went to the aid of the sailors and the Port Campbell rocket crew was dispatched, but the crew had all managed to reach shore safely by the time help arrived. The ship stayed in full sail on the rocky shelf for nearly two months, attracting hundreds of sightseers who watched her slowly disintegrate until the pounding seas and dynamiting by salvagers finally broke her back, and her remains disappeared back into deeper water. The valuable cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. Further salvage operations were made from 1974-1986, during which time 22,000 slate tiles were recovered with the help of 14 oil drums to float them, plus personal artefacts, ship fittings, reams of paper and other items. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson’s navigational error, not too technical failure of the Clyde-built ship. The shipwreck is a popular site for divers, about 300m offshore and in 3 – 15m of water. Some of the original cargo can be seen at the site, including pieces of roof slate and coils of barbed wire. This mast collar is significant due to its association with the ship FALLS OF HALLADALE, which is listed on the Victorian Heritage Register, VHR S255 The Falls of Halladale shipwreck is listed on the Victorian Heritage Register (No. S255). She was one of the last ships to sail the Trade Routes. She is one of the first vessels to have fore and aft lifting bridges. She is an example of the remains of an International Cargo Ship and also represents aspects of Victoria’s shipping industry. The wreck is protected as a Historic Shipwreck under the Commonwealth Historic Shipwrecks Act (1976). Mast collar, steel, salvaged from the shipwreck FALLS OF HALLADALE, wrecked off the coast of Peterborough, South West Victoria. Oval shaped a band of metal with a straight band of same heights attached between the long sides. Two metal loops are attached to the outside of the oval shape, next to the crossing band. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, falls of halladale, shipwreck peterborough vic, sailing ship mast collar, masthead of sailing ship, falls of halladale mast collar, masthead, mast collar, ship rigging 1908, russell & co.

"What Australia Makes, Makes Australia" - The Mytton Story. A short history by L F HARRISON and L W JOHNSON (Wal). 25 pages. Myttons was an engineering firm with premises in South Melbourne and Port Melbourne. They made objects as diverse as cutlery sets to sinks and larger industrial stainless steel productsindustry - manufacturing, social activities, societies clubs unions and other organisations, sport - australian rules football, myttons ltd, rodd cutlery, allbrite cutlery, dev mytton, grosvernor cutlery, built environment - industrial, reginald h mytton, eric g redwood, colin mackay, l f harrison, l w (wal) johnson, russell flack, john donaldson, lance powell, horrie farrow, syd svensson, tom fahey, tommy lahiff, arthur steele, jean hopkins, dennis mackinley, lorraine robertson, douglas robertson

Pittock coach builder's box: set square located in assinged location at the front of the box * rusted steel blade with timber and bras handle * square 270 mm L x 160 mm deep handle * no discernible manufacturer's marks Item stored in Pittock coach builder's box, reference 13000.1.

"Potential blockage in the Fallopian tubes was assessed using this apparatus. It was developed by American gynaecologist Isidor Clinton Rubin (1883-1958). It blows carbon dioxide, via a cannula, into the uterus. The ease with which gas escaped through the Fallopian tubes was reflected by pressure changes on an instrument called a manometer. Blockage of the tubes is often due to previous infection or surgery. It is a common cause of infertility. Rubin’s test formed a standard part of infertility investigations for many years. It was gradually replaced by an X-ray technique involving radio-opaque ‘dye’ injected into the uterus." Source: Science Museum Group. Rubin’s apparatus for uterotubal insufflation, New York, United States, 1928. A639503Science Museum Group Collection Online. Accessed 12 June 2024. https://collection.sciencemuseumgroup.org.uk/objects/co96774/rubins-apparatus-for-uterotubal-insufflation-new-york-united-states-1928-tubal-insufflator. Model may be dated c1919 or 1920s or 1930s. 1919 was the year Isidor Clinton Rubin (1883-1958) introduced the apparatus. Instrumant has a label with Cyrus Jones monogram " Donated by Dr Lorna Lloyd Green, 1986/ Rubin's Insufflator/ NB "sparklet holder separate" missing?Rubin's tubal insufflator apparatus, large cylidrical glass canister inside a portable carry box with two doors with three glass nozzels at top with long rubber tubing attached on each. One surigical steel introducer, one glass introducer attached. A blood pressure manometer is fixed on the inside door. infertility

A Dayton Junior Pilot tennis racquet, with a wholly steel frame. Racquet strings made from piano wire. Racquet head stringing continues through into the fully opened throat. Decal of model features on left side of shaft. Materials: Metal, Glue, Lacquer, Paint, Leather, Ink, Cord, Stringtennis

Coloured photo of a group of people in front of a red steel structure. Some Japanese people in the photo. Peter Ellis third from the left. Souvenir of Tokyo JTB-HATO Bus Tour's Oct. 1977. Photo enclosed in a colour folder with Japanese buildings, ship, aeroplane, train and a picture of a man on the front.photo, group, mixed group, peter ellis collection, souvenir of tokyo jtb-hato bus tour's oct 1977

Austral 8 HP oil engine on 4 wheeled steel chassis with wrought iron wheels. Two double flywheels and flat belt pulley. Water cooled exhaust system at the crank end of the engine. Galvanised iron fuel tank slung under the engine. Painted green and black with red wheels.On an oval brass plate on the side of the engine :- "The Austral Oil Engine / Ronaldson Bros / Makers / No 663 / & Tippett / Ballarat Victoria"machinery ... engine ... oil ... metalwork

Donated by Cliff Marshall the brother of Clyde Marshal who was a RAAF Medical Orderly and served with 2 Squadron in Vietnam from 1967 to 1968.Australian servicemen on duty in Vietnam who smoked generally had Zippo Lighters. It was a smoking accessory that was widely known worldwide and made popular in Australia by returning veterans. Rectangular stainless steel liquid fuel cigarette lighter with flip up lid.Internally a pull out receptacle that contains cotton absorbent wad to soak up the liquid fuel, flint tube and wick. The exposed top half has the flint striker roller, exposed wick, flame shield and locking toggle.On flip up lid “CLYDE / MARSHALL” on reverse VIETNAM /67-68; on case [RAAF MEDICAL INSIGNIA]. On reverse side “map of South Vietnam and North Vietnam showing names of towns, Danang, Hue Quihon Nhatrang Camranh Phanrang, Saigon Hanoi, Haiphong, Haiman, and South Vietnam flag. The base in inscribed with manufacturers name and patent number "BRANDFORD PA/ZIPPO/PAT.2517191"zippo, cigarette lighter, smoking accessories

Hecla produced a wide range of appliances for domestic use, beginning with heaters and later branching out to a wider range of kitchen appliances Hecla was established by Clarence William Marriott, a young Melbourne metal worker. He began manufacturing Australia's first carbon filament electric radiators in 1899. He originally worked for his father James Marriott who commenced business in Melbourne as an art metal worker in 1872 and was, in 1907, appointed as the official art metal worker to the Victorian Government producing items including the ornate iron gates and gas lamp standards outside Melbourne's Parliament House. With the invention of nickel chromium wire after 1900, C.W. Marriott began making more efficient heating elements using this new material in 1916. After being influenced by the eruption of Mount Hekla in Iceland, on 19 December 1918, Clarence registered the brand name "HECLA" with an erupting volcano as its logo. The company Hecla Electrics Pty Ltd was officially registered in 1922. In 1928 the company adopted the advertising slogan, 'By Hecla, it's Good'. The Hecla range rapidly expanded to include electric heaters and radiators, electric foot warmers, electric kettles, ceramic & metal electric jugs, immersion hot water elements, electric fans, electric coffee percolators, electric toasters, electric grillers and stoves, electric irons and electric frypans, clocks and curling wands. Electric blankets were introduced shortly after WWII.In 1930, a controlling interest in Hecla Electrics Pty Ltd was acquired by General Electric Corporation. Clarence William Marriott died in June 1967 in Melbourne, Victoria.This item is representative of a common domestic appliance used throughout Australia. It was manufactured by a pioneering Australian company.A small chrome steel toaster manufactured by Hecla Australia. It has a door on either side which flips down to insert or remove a slice of bread on each side, Each door has two black Bakelite knobs. The electric element is placed down the centre of the cavity. A detachable electric cord is included.240 Volts, 600 Watts. Cat. No. T4 Submitted to Electrical Approval Board Ref Application A1/AD01 SECV 240 Volt 600 Watt MANFED. IN AUSTRALIA SOLID BRASSelectrical appliances, hecla corporation australia, clarence william marriott, domestic appliances

Black and white small format postcard of the timber observation lookout at Jemmys Point, Lakes Entrance, Victoria, showing the updated and safer steps from ground to observation deck, with fenced landing at halfway point. Old log and seat still nearby, signal light on steel tower a short distance away.historic sites, navigation, fences

Used for endometrial biopsy. This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Stainless steel curette. Consists of a small handle section with finger grip and a slender metal shaft, ending in a hollowed, squared point. Writing engraved on handle of device reads 'martin GERMANY STAINLESS'. In white paper sterilisation bag bearing the handwritten text 'DR H/W' and KEVURKIAN (sic)/CURETTE''martin GERMANY STAINLESS'gynaecology

This photograph shows the second major bridge across the Snowy River at Orbost. The current Snowy River bridge is the fourth to provide a crossing to the township of Orbost. The first, in 1891, lasted just two years before it succumbed to flood waters. The bridge in this photograph was built in the 1920s as a road and rail bridge, and was again partly washed away by flood waters in 1934. After the end of the first World War the Victorian Railways considered an extension of the railhead across the river at Orbost, and in 1922 a new timber and steel girder structure, a joint Country Roads Board — Victorian Railways venture, was built and completed at a cost of £41,000 (the steel girders came from the Flinders Street viaduct reconstruction). Subsequently it was decided not to take the railway across the river, and the bridge was only used by road traffic. It was severely battered by floods during its life. and after the devastating 1971 floods was eventually replaced by the current bridge in 1975. (info from Newletter 54N by John Phillips)This is a pictorial record of the flood damage in 1971 when part of the Snowy River Bridge was washed away.A black / white photograph of a bridge which has been damaged by floodwaters. It shows one end has been washed away.orbost-snowy-river-bridge-1971 floods-orbost-1971

The Archimedes drill, also known as a fretwork drill, is an old type of drill which works on the Archimedian principle; the drill rotates quickly as the barrel on the stem is worked up and down. This tool provides a quick and easy way to bore holes through ordinary fret wood and other substances, smaller versions are used in jewellery making where precision drilling is required. There were numerous different sized Archimedes drills made from various materials, usually a combination of wood and steel, some being all steel and some including brass parts. The fancier versions of these drills included parts made from Rosewood, Ebony, Ivory and decorative brass parts. Some of the later Archimedes drills had technological improvements such as a ratchet device and the inclusion of fly-weights. The ratchet device allows the drill to revolve continuously in the cutting direction. The fly-weights give momentum to maintain the speed of the drill during the upward stroke of the hand. Most old examples have no makers names.A vintage drilling tool that has been nickel plated with brass fitting and easier to sterilise. The item therefore could have been used in the medical profession as a bone drill during surgery. Weighted Archimedes drill all metal construction, nickel plated with brass handles centrifugal typeNoneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, archimedean drill, drill, tool, drilling tool

The Archimedes drill, also known as a fretwork drill, is an old type of drill which works on the Archimedian principle; the drill rotates quickly as the barrel on the stem is worked up and down. This tool provides a quick and easy way to bore holes through ordinary fret wood and other substances, smaller versions are used in jewellery making where precision drilling is required. There were numerous different sized Archimedes drills made from various materials, usually a combination of wood and steel, some being all steel and some including brass parts. The fancier versions of these drills included parts made from Rosewood, Ebony, Ivory and decorative brass parts. Some of the later Archimedes drills had technological improvements such as a ratchet device and the inclusion of fly-weights. The ratchet device allows the drill to revolve continuously in the cutting direction. The fly-weights give momentum to maintain the speed of the drill during the upward stroke of the hand. Most old examples such as the subject item have no makers names.A vintage drilling tool that gives a snapshot into how holes were drilled by hand into small or delicate objects during the Victorian era. Tools from this time are today regarded as collectable items eagerly sought by collectors of antique tools.Archimedean drill with wooden grip and butterfly nut on chuck.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, archimedean drill, drill, fretwork tools, wood working tools

The Archimedes drill, also known as a fretwork drill, is an old type of drill which works on the Archimedian principle; the drill rotates quickly as the barrel on the stem is worked up and down. This tool provides a quick and easy way to bore holes through ordinary fret wood and other substances, smaller versions are used in jewellery making where precision drilling is required. There were numerous different sized Archimedes drills made from various materials, usually a combination of wood and steel, some being all steel and some including brass parts. The fancier versions of these drills included parts made from Rosewood, Ebony, Ivory and decorative brass parts. Some of the later Archimedes drills had technological improvements such as a ratchet device and the inclusion of fly-weights. The ratchet device allows the drill to revolve continuously in the cutting direction. The fly-weights give momentum to maintain the speed of the drill during the upward stroke of the hand. Most old examples have no makers names.A vintage drilling tool, the item therefore could have been used in various industries or professions where precise drilling is required. Archimedean drill with Rosewood hand, brass grip and fittings Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, archimedean drill

A brown cane oval woven sewing basket with a lid which has a pink studded silk lining. It contains - a pair of scissors, a cotton reel, embroidery thread, a bone handled crochet hook, tailors chalk, plastic containers, darning wool, press studs, bias binding, a doily and applique flowers.Crotchet cotton - Coates fast 609 colour Mercer Crotchet 60, 6 Black British Snap press studs - Guaranteed Rustless Size 1 Made in England, Standard darning Wool, Tailor's Chalk - RogeR & Gallet Paris, Scissors 101, 89 on one side of blades and Razor Silver Steel Saranti Forge Nogent france on the other side, Standard darning Wool Co Pty Ltd Stawell, Vic. Australia, steel crotchet hook has an embossed pattern on the handle, Superior Linen Thread No 30, Lindsay Thompson (Threads) Ltd Belfast, black pure flax linen thread 60 750 yards reverse twist.sewing baskets, baskets, sewing equipment

Taken in the early 1900s, the postcard depicts two girls dressed in old style, white knee length dress which was common for this period for young women. This compared to the ankle length styles which were acceptable for adult women. We can also see an example of early bridge construction and engineering, notably made from timber rather than from stone or steel, noted in the postcard as Snow's Bridge. Sepia rectangular postcard printed on card Obverse: Snow's Bridge/Beechworth Reverse: Dear Julie/ I received your pretty PB/ We haven't gone away yet. Mr Stokes/ asked me were you going to be/ married. He wished you luck/ (I wonder/ if he meant it.) We sent the Magpie to Annie to-day. I haven't got any/ word about going to a [unknown]/ yet. We had a great Friendly Societies/ day yesterday but it rained a bit/ Sally is going to get a [illegible] silk/ dress. When are you to be married?/ Mr Pounceby is back at Allen's shop./ [unknown]. We are going to Belle's for a [unknown] if we can. With Love from Lilly. bridge, beechworth, snow's bridge, children, childhood, postcard

Owned by Sig. L. W. Hanger who enlisted in February 1942 at Caulfield and was discharged in December 1945. Last posting was with 5 Aust. Jungle Trunk Line Maintenance Section with rank of Lance Corporal. Note: Although these helmets were designed for Motorcycle Despatch Riders, they were also widely used by the 1st Australian Parachute Battalion from 1943-1945 due to a lack of available British Steel Airborne Helmets. Despatch rider's helmet made of Duperite (similar to Bakelite) with leather wraparound side and back below helmet. Cloth webbing inside for firm fitting. (See photos for detail of leather wrap and internal webbing). Chinstrap buckle and tongue attached to leather wrap.External front of helmet: ink-stamped Despatch Rider insignia Name (Inside on webbing support): Sig. L.W. Hanger Service Number (Inside on webbing support): VX74482 Manufacturer's Label (inside): Duperite 1942 Made In Australia THIS HELMET IS SUITABLE FOR HEAD SIZES 6 3/4 TO 7 MODEL No. 2200/2 (See photos for more detail of Label)

Alfred Wayne & Co. produced a number of braille writers over the years, including The Visible. Alfred Wayne (1854-1926) was listed as a 'manufacturer of small novelties in metal and steel' in the 1901, however by the 1911 census he had turned his company into a 'manufacturer of apparatus for use of the blind'. Together with Henry Stainsbury, they produced a number of braille typewriters as well as the more well know crab design of the Stainsby-Wayne brailler.Cast iron Brailler. The body of the Braille writer is painted in black with silver and gold painted inscriptions. Seven metal oval keys are situated at the front of the machine. The roller for turning the paper is made from turned wood.Marked: Painted on front of machine: "The visible/manufactured by/Alfred Wayne/Handsworth/Brimingham. Englandbraille equipment, assistive devices

Used by women and girls to wave or crimp their hair, for styling their hair, hairdressing. The irons are heated and then applied to the hair and wound to form curls. Pre-dates electrically heated curlers.One set of curling tongs made of iron/steel, rusted. The tongs are two shaped metal pieces which clamp together over a tress of hair. One set of crimping tongs. These have two wavy iron shaped metal pieces which clamp over a tress of hair to produce crimpy waves.hair-crimpers-curlers hairdressing heated-curlers

Following the closure of the RAAF Air Base after the Second World War an auction sale was held. Mr Goldsworthy, mechanic and garage owner of Kaniva purchased the clock and hung it on the wall of the garage where it remained when the business was sold to Mr Eddy Rowe of Kaniva. The clock remained in action until the 17th October 2009 when Mr Rowe disconnected the power supply to the clock, and donated it to the Nhill Aviation Heritage Centre (NAHC) to be kept as memorabilia of the Second World War. On completion of the building of a new hangar/exhibition centre at the Nhill Aerodrome, the clock will be hung on the wall and once again connected to the power supply.Clock was used at the air school at Nhill during WW224 hour electric wall clock with Telechron brand on face. It has a pair of hour hands, one red one black and a black minute hand and second hand. A domed shaped Perspex front. The clock face has 24 hour markings. The glass and clock face are set within a steel frame.The clock has Telechron and twenty-four hour numbers written on the clock face. Pasted on the back side is "instructions for setting the clock which is marked WARREN TELECHRON COMPANY/Ashland Mass. U.S.A world war two, clock, electric clock,twenty four hour clock, nhill aerodrome, raaf air base, warren telechron, goldsworthy, eddy rowe

Emergency signaling mirror - Ground to Air .1) Bright polished steel. Cross hairs engraved on reflective surface. Rear face has instructions for use, yellow sticker with black print. .2) Sight. Long piece with viewing hole at end, painted white. .3) White cotton container with tie straps..1) On rear yellow sticker / black print: "Instructions for use of Heliograph Mirror & illustration" .2) Site stamped one side: "27H / 2107" .3) Faded stencil on flap: "Heliograph" heliograph, mirror, ground to air