Photograph. Harry Biggs Collection. 2 photos. (1 mounted on card) of W. E. Brown's business. On the left is a brick building with W. E. Brown Carpenter & Builder. Below this are two windows with two people in each looking out. Below this residence is the shop with the sign above the door W. E. Brown Ironmonger Brush wear & Paper Hangings. Standing in front of this are 4 men & a little boy. Beside this building is a gate & lane way, then a wooden shed with the sign W. E Browns Timber & Iron Yard. Above that sign is a further sign - W. E. Brown Builder Timber Merchant. In front of this is a horse & cart with some timber in it & a worker beside the horse.place, building, commercial, harry biggs collection, w. e. brown

Set of three letters written to Bob Lilburn regarding Ballarat matters. .1 - Dave Macartney - 2-12-1990 - re the Ballarat Tramcar restaurant and the bodies that were used, advertising on tram 40 (a perineal topic of Bobs'), ESCo No. 12 body. Written on the back of "Keystone Movies" letterhead which was operated by Dave. .2 - Dave Macartney - 29-3-1992 - W2's at Balkistons yard and the removal of the two (W2 552 and 625) and scrapped from the Tramcar Restaurant on Macarthur and Drummond St North. .3 - Dave Macartney - 20-6-1993 - regarding ESCo 16, that featured in The Courier 1971 and its location - located in Haddon and burnt after 1971.trams, tramways, letters, esco, w2 class

White cardboard mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of Ballarat Trams bogie No. 35 and four single truck cars in the storage loop, or City Loop at the east end of Sturt St. No. 35 has a "Bray Raceway Trotting Friday Night" on the front of the tram. The film strip notes (Reg. Item 2560), provided the following caption details: "At the east end of Sturt St., about 200 yards from "CITY" was "CITY LOOP" - a storage facility used to hold cars for peak loadings and emergency use. -Nov. '70 (Glen Mills) See image btm2562p.tif for high level scan of image. Stamped on base of slide "11770" and written in ink on top edge "Lydiard St. Ballarat"tramways, trams, are, film strip, city loop, sturt st, tram 35

Book - 10 pages + 13 drawings sheets of rail cross sections contained within separate printed covers (colour fleck), titled "British Standard - Tramway Rails and Fish Plates - Standard Sections and Specification - July 1903". Side stapled and then bound with a green tape on left hand side. Gives details of the standards of the materials, rolling, payment, conformity, testing, marking holes for both rails and fishplates. Drawings for 13 different weight rails, straight and curves, 90lb/yard to 116 and a drawing of the BS tyre profile for tram car wheels and how it interfaces with a rail. On rear cover, both sides gives a list of standards and foreign translations up to March 1919.On top of first sheet in black ink "Ballarat Tramway Preservation Society Catalogue No 8."trams, tramways, british standards, standards, rails, fishplates

The item is a hard cover book recording stock in 1890 for T.J. Connolly, Ironmongers, Sandhurst. Each handwritten page lists goods by location, quantity, description, prices with price total at the bottom of each page. Locations include shelves, floor, yard, factory, paint shop. Pages 1 to 164 have been numbered by hand. An alphabetical index list types of stock on unnumbered pages after page 165, followed by blank pages. The hard cover is patterned and shows some wearing at the corners and front and minimal wear on the back. The spine edge is red with considerable wear at the top and bottom. The pages are bound together with string. This item is part of the Margaret Roberts Collection.There are ink spots on the front and back cover. A list of numbers, titled "Prices required" is handwritten inside the back cover. A piece of paper is stuck inside the back cover, listing items to be added.margaret roberts collection, ironmongers, forest street, bendigo businesses

The donor George Lister Coop was about 21 years of age when he took this photo. It is one of a small series of photos donated by him that relate to Mont Albert and Surrey Hills stations. He has always had an interest in railways and there are other examples of his documentation of railway history in other collections contributing to this database. R J Mercer was the butcher at 112 Union Road. This property has a long history of being a butcher's shop beginning from c1904. He took over from Edward Lloyd in 1951. Spotless Dry Cleaners were at 104 Union Road.This is an important photo as there are few known colour images of the station prior to the installation of the third line in the early 1970s, which resulted in the demolition of the station built in 1883. It is also significant as a record of the housing along the south side of Stirling Crescent which was later replaced by light industry.A digital colour photo of Surrey Hills railway station taken from the overhead pedestrian footbridge looking towards Canterbury. Both tracks and the verandas on either side of the line can be seen, as can the railway gates in the open position and the signal box, beside which is a large palm tree. A section of red goods vans are positioned in the adjacent goods yard. Some of the businesses and advertising hoardings in Union Road can be seen in the background. These include A Doubleday (real estate agents), R J Mer..., grocer, baker, Spotless Dry Cleaning, Robur tea and Lipton tea (part of only). A number of the Edwardian houses along the south side of Stirling Crescent are also seen.george l coop, surrey hills railway station, goods yard, real estate agent, a doubleday, grocer, baker, union road, stirling crescent, spotless dry cleaning, r j mercer, butcher

Marine art, Maritime artLarge framed glazed landscape format painting depicting in foreground a rusty hull of a ship against a deep aqua blue sky. The hull appears to be in a dry dock with a stylized figure with a red top and blue pants looks down from the prow at the set of low buildings and yard in the foreground. Another ship appears to be moored behind the rusty hull but only the bridge of the ship is visible. At near right in foreground there appear to be two rounded graves or headstones.The frame is sharply beaded and with gilding. The painting has a window mount and is glazed with glass. Paint surface is thinly but intensley painted and seems to be gouache or watercolour on paper. Sealed at back with brown paper mostly intact and a corded hanging system.at lower right corner quadrant there seems to be a mainly rectangular ciphertankers, marine painting, artwork-paintings

Framed presentation of the "Port Melbourne Bus Depot - 1937 - 1966 Honor Board", listing the bus drivers, conductors and conductresses whose name appeared on the Yard Sheet on the last day of the depot - 30/6/1966. It opened on 9/12/1937. Includes some of the known Officers and one of the revenue clerks. Prepared by Kevin Stanes 2016. Framed with a commercial black plastic frame with a light wood back, glass sheet and various clips and suspension points. Listing of names and other information provided by Kevin Stanes by email: Port Melbourne list - see htd1443 - Port Melbourne Bus Depot Employees List.doc in the documents file. For email and recollections in particular about Doncaster - see htd1443email.pdftrams, tramways, port melbourne, buses, drivers, conductors, officers, depots

Koch's Pioneer Quartz Mining and Crushing Company, No Liability Long Gully Bendigo Share Certificate. Distinctive Numbers 48164 to 48213 in the name of William Grattan of St Kilda. Certificate Number 2930. Dated 7th December 1911. Signed by ?, Hugh Boyd, Directors and J. H. Craig, Manager. On the back is a map of the lease showing where the shaft is and a measurement of 450 yards from one side of the lease to the other beside the shaft. The lease is an irregular shape. Adjoining leases mentioned are Windmill Hill Co., G. Lansell's Sandhurst Mine, Cornish United Co. and the Hercules & Energetic Co. Arthur T. Walker, M. S. printed at the bottom. Albert Richardson Collectionmining, parish map, koch's pioneer, koch's pioneer quartz mining and crushing company, no liability, koch's pioneer quartz mining and crushing company, no liability share certificate, william grattan, hugh boyd, j h craig, arthur t walker, windmill hill co., g lansell's sandhurst mine, cornish united co., hercules & energetic co.

This cash book contains entries which relate to the everyday operation of the Borough Common which predates the establishment of Warrnambool as a town. All ratepayers had the right to graze their cows on the common, with the cows being collected every morning by the herdsman and walked to the common. Entries relate to items such as eradication of thistles, repairs and erection of stock yards, burying of dead stock, purchase of bulls and clearing of waterholes. Salaries were paid to E. Margetts, D Allan, T Raingill, and M T Read. Auditors were James Dickson. After WW1 parts of the common were allocated to soldiers’ settlement blocks ranging from 18 to 30 acres. Other parts remained with the Crown for Municipal uses and part became the Warrnambool Golf Course. In 1925 the common was abolished.The entries in this book record the operations and earliest residents who were involved in the Common in the early days of WarrnamboolGrey and red mottled card cover with dark green points and spine. Paper label on front cover. Dark blue and tan mottled paper inside front and back covers. Warrnambool Municipal Common Cash Book.warrnambool borough, warrnambool common, e margetts, raingill, d allan, m t read, warrnambool common cash book

Queenstown (St. Andrews) District. Originally published in The Leader, Nov. 2nd, 1929, p30, with the title "Relics of the Old Mining days in the Queenstown District," a series of seven numbered photographs with captions : 1. Two Old-Timers, Brothers Tom and Alex McPhee, Camped on Back Creek. 2. Like the Caledonia, Every Yard of Queenstown Creek has been Washed. 3. Poppet Heads of the Caledonia Mine. 4. A Warning to Possible Land Buyers or Encouragement to Prospectors? 5. Mr. A. Harvey has been Prospecting the District, Washing a Loam, for Some Years. 6. John Olsen, of Smith's Gully, an Old-Timer, who is Shortly Going to Norway to Claim an Inheritance. 7. Queenstown Cemetery. - The Hills Form a Splendid Memorial to Many a Digger.This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as the 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital image 4 x 5 inch B&W Negsepp, shire of eltham pioneers photograph collection, queenstown, gold mining, a. harvey, alex mcphee, back creek, caledonia mine, john olsen, poppet heads, queenstown cemetery, queenstown creek, smiths gully, st. andrews, tom mcphee

Van 2NBC - 1 compartment and van (7 & 4 ton capacity) In Active Service - Belgrave Station Yard NBC COMBINED SECOND-CLASS PASSENGER CAR AND GUARD'S VAN. Six cars, numbered 1-6, were built during 1898-1905 and originally classed NBDBD. The D was previously the letter code for Brakevans/Guard's Vans, but was changed to C when the double-letter code was dropped in 1910. A final NBC numbered 7 was added to the fleet in 1910. VR Service History : NBDBD 2.VA - 3/10/1899 NCL Built new - circa 1900 - Photograph R101: as N2BDBD circa 1910 - To NBC 2.VA - *NBC 2.VA - / 5/1926 - Modified AC Malco circa 1955 - Condemned -Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Passenger and Guard's Van carriage Victorian Heritage Register (VHR) Number H2187 The Puffing Billy Rolling Stock Collection2NBC - Combined Second-Class Passenger Car And Guard's Van. - Made of Timber on a Wrought iron frame 2NBC - 1 compartment and van (7 & 4 ton capacity)2NBCpuffing billy, 2nbc, 2nbc - combined second-class passenger car and guard's van, victorian railways, narrow gauge passenger and guard's van rolling stock, 2'6" guage

Van 14 NUU - Louvred Truck (11) Untrafficable - Belgrave Station Yard VR Service History 15/ 7/1911 NWS Built new Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Weight 7 tons Capacity 10 tons Built 1898 - 1911 Number Built 14 In use 5 To be restored None *NUU 14.VA - 15/ 7/1911 NWS Built new - / /1926 - To NU 14.VA - NU 14.VA - circa 1926 - Modified AC Malco 1/10/1977 - Off Register To E.T.R.B. RS77/4223 Puffing Billy Service History or Notes Historic - Victorian Railways Narrow Gauge - Rolling Stock - Louvered VanWooden Louvered Van - Made of Timber on a Wrought iron frame14 NUpuffing billy, 14 nuu, louvered van, victorian railways, 2'6" guage, narrow gauge rolling stock

While one of the lesser prime loading points sawn and split timber were loaded at Beech Forest, and a large share of this was brought to the station over two timber tramways that operated between 1904 and 1933. At the eastern end of the railway yard, near the six-ton derrick crane, a wooden tramline curved out the gate and along the road for about 8 km (5 miles) to the co-operative Box Company, known locally as the Box mill, owned by the Victorian Diary Farmers' Co-operative whose purpose was the milling of butter boxes. Other millers also provided timber. Logs were hauled to the mill by horses, and the sawn timber despatched over a tramline that joined the Box mill line about 1.2 km (0.75 miles) along. B/W. Two men loading puncheons (a short post approximately 4 feet [1.2 metres] especially used for supporting a roof in a coal mine) on a NQR wagon at Beech Forest. Note the lack of trees in the background.beech forest; railways; puncheons;

F.G.Barnard, writing in 1910, recorded that Ernest Ingle opened a boys' school in a private house in Cotham Road, Kew, in 1872. The school was later moved to larger premises in Charles Street, where suitable school rooms were added. Ingle's career was cut short by a fatal attack of typhoid fever in 1875. The school then passed into the hands of Mr. J. Henning Thompson. Under Thompson's management the school speedily became a strong rival to the neighbouring Hawthorn Grammar School. Barnard also lists in his Jubilee History of Kew, that Dr N.C. Vance [winner of the trophy for the 440 yards running event] was a notable alumnus of Kew High School. It is assumed that N.C. Vance was the son of Rev G.O. Vance who was appointed vicar of Holy Trinity Church, Kew, in 1870. This is a tangible memento of the first Kew High School, awarded to a pupil eight years after the school's establishment. The trophy is historically interesting as it was presented to N.C. Vance by Ann Bon, a notable Kew resident and a supporter of Indigenous People in Victoria, particularly William Barak and his family.Silver plated trophy in the form of a cup on a pedestal with two arms, each surmounted with pine cones. The trophy has a range of design features including convex and concave decorated surfaces created by repoussé (i.e.hammering). Specific decorative aspects include scrolling at the top of the cup and floral sprays at front and the rear of the trophy. There is a single inscription identifying the school, the event, the winner and the identity of the person presenting the trophy. The metal used in the cup section of the trophy is heavier and thicker than that used in the rest of the trophy.There are no compositional or maker marks on the trophy.Inscribed: "Kew High School / Old Boys Cup / Presented by / Mrs John Bon / Won by / N Vance 1880"dr n vance, kew high school -- kew (vic.), private schools -- kew (vic.), sports trophies -- kew (vic.), n.c. vance

Erected 1974, dismantled 2000s. The Headquarters was operated from the family home at Ferris road at its inception, and in 1974 to the Barrie home at First Avenue Melton South. A storage office and Radio Tower was erected in the yard. A connection phone line was linked to the home of Wayne and Lynn Sullivan who lived at the rear in Kurrajong Cr later became LY remote. Wayne later became Communications Officer and the Headquarters moved location to the Melton Fire Station. The Mount Cotterill Group encompassed the Rural Fire Brigades of Melton, Rockbank, Sydenham, Toolern Vale, Truganina, and Werribee and later Diggers Rest. In the stage of transition from H.F.( High Frequency) to Very High Frequency some radio sets were non CFA Tankers when the group was established. Antenna was at 19 First Avenue, Melton.emergency services

Refer to Cat 4967.2 Service of John Robert Attwood1, Sgts Chevrons, sewn onto dark khaki material. It in turn is sewn onto a cotton arm band. The armbvand is held closed with a brown bakelite button. 2, Sgts chevrons, dark tinted sewn onto dark khaki material. 3, Sgts chevrons, the stripes are of a two tone colour, which is sewn onto a background of light khaki. 4. Sgts chevrons, two tone khaki sewn onto a medium colour khaki. 5. Sgts chevrons, two tone khaki sewn onto a medium colour khaki.ww2, uniforms, rank badges

Photograph. 12.5 cms x 17.5 cms, in a plain silver frame. In black and white, this photograph shows bride Aileen Beryl Ervin of McKenzie Creek, via Horsham, in her wedding attire, for her marriage to Leslie John Ellison, of McKenzie Creek via Horsham. This ceremony was officiated by Rev. Francis Fielding, on September 24th 1949, in the Horsham Methodist Church. The bride wore a beautiful gown, with a short and a long veil. Her flowers trail beautifully and she appears to be holding some horseshoes over her left arm.photograph, person, photograph of bride.

Clothing. Infant's white spotted muslin waisted dress. High round neck with lace trim. Front of dress has alternating vertical stripes of pin tucks and lace. Skirt tightly gathered into casing at waist. Lower section of skirt has alternating horizontal stripes of pin tucks and lace. Long shaped sleeves with fabric cap around arm hole. Sleeve gathered into casing at wrist. Item edged with lace, forming a frill. Centre back opening (20cm) fastened with five X .9mm white buttons between neckline and waist.costume, children's, infant's white spotted muslin dress

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection.A black and white photograph of the Commanding Officer of 9 RAR, Lt Col Alan Morrison, of Woodside, South Australia has a cold beer with a Maori member of the New Zealand 161 Battery, Royal New Zealland Artillery on 24/11/1969. 161 Battery had been the main supporting arm of 9 RAR, which was finishing its first tour of duty in Vietnam. Lt. Col. Morrison had also been presented with a parting Kiwi gift farewelling his Battalion. 161 Battery had been continously in Vietnam since 1966.photograph, lt col a.l. morrison, 9 rar, 161 battery, new zealand maori, royal nz artillery 161, gibbons collection catalogue, commanding officer, maori soldier, the royal australian regiment, denis gibbons

This testing voltmeter recorder was last certified by SEC Vic laboratories on the 17/4/77. It was used extensively as mobile recorder placed for periods of one month at locations experiencing unacceptable fluctuations of power. These locations would cover the North East regions of Victoria. They cover voltage drops at domestic and business properties especially those that were experiencing regular fluctuations(daily) at approximately the same time of the day. As the electrical network is required to operate within a set level of voltage, fluctuations outside of this has to be investigated and necessary remedial action taken. This is especially so for rural properties where power "drainage" can occur through animal/bird and tree interference. It can also be the result of defective wiring and overloading at peek operational times (milking machines).This mobile voltage recorder is very significant to the Kiewa Valley because it highlights the difficulties that can occur in maintaining a power supply that experiences fluctuating power demands by the rural industries that it supplies. The requirement of a mobile testing apparatus to cover the various sections in the Kiewa Valley and other rural areas in the northeast region is one of necessity as electricity once connected to a rural property is a labour saving supply as generators on rural properties require a higher degree of maintenance an ultimately at a higher cost. The testing of the SEC Vic supplied electricity to rural properties,those who had previously run on generators, had to be quick and unassuming with certainty of correct supply levels.The mechanism of this voltage recorder has been installed(by the manufacturer) into its own protective wooden box. This box has a front (swing open) lockable section which permits direct access to the installed measuring equipment (for servicing and data collection). The top section of the box has two screw on terminals for access to the machine being tested. This tester has its own inbuilt ink supply facilities and a mechanical clockwork device that unwinds a roll of paper onto a second roll at a rate of 10 mm per hour. The recording chart is marked with time slots against voltage. There is a recording arm which has an ink pen at the end. Both arm and pen carry the ink supply from the ink reservoir, located on the left side of the cabinet door in specially constructed bottle holder( three small bottle capacity). To record a suspect power problem to a home or business establishment the voltmeter is connected to a power supply outlet being tested and wind the recording clockwork mechanism (gives a four week running time). Before leaving the recorder in situ the electrician checks to see if the chart is recording the correct voltage and that the clock mechanism is advancing correctly.On the front of the access "door" at the top a metal label "RECORDING AMMETER" below this "MURDAY SYSTEM" below this "ALTERNATING CURRENT" and below this the manufacturer's registered number "No. 139156" Below this is a metal tag with State Electricity Commission of Victoria Electrical Engineer's Section equipment number "338" Below these tags and above the viewing window is the manufacturer's dtails "EVERSHED & VIGNOLES Led LONDON"sec vic kiewa hydro scheme, alternate energy supplies, alpine feasibility studies temperature, rainfall, power outages

The RDNS Sister is visiting the mother and babe in their home. She is using sterile equipment and swabs to firstly moisten the tulle gras to enable ease of its removal before redressing the open areas on the babes skin with sterile dressings. With RDNS visiting the home of the mother, the young babes routine can continue to be established at home, rather than them having to regularly visit a Doctor or Hospital department for redressing of the babes lesions. The Trained nurses (Nurses) of the Melbourne District Nursing Society (MDNS), from its inception in 1885, provided wound care to their patients who ranged in age from the very young to the elderly. The patients required their wounds to be dressed following various types of surgery, accidents, burns, skin conditions, cancer, leg ulcers etc. As research developed better products and dressing materials, the methods and medication applied to wounds changed. MDNS received Royal patronage in 1966 and as Royal District Nursing Service (RDNS), the Education department developed wound care programs, such as the Leg Ulcer Management Program to provide their Trained nurses (Sisters) with methods of best quality care. They ran a program for Wound Care Specialists who made assessments and provided advice and support to the District Sisters working in the field as needed. The Sisters liaised with the patient’s Doctors and Hospitals to provide information on the progress of patient’s wounds and to receive any change of wound care from the Doctors. On the left in the black and white photograph is a Royal District Nursing Service (RDNS), Sister, who has short, straight blonde hair, and is wearing a white gown over her uniform is bending over a bassinet as she attends a baby with a skin condition. The Sister has her arms extended with a pair of forceps in her left hand, and in her right hand, another pair of forceps with a cotton wool swab attached is touching tulle gras on one of the wounds on the babes outstretched right arm. The baby is on her covered change table and is wearing a singlet and an opened patterned jumpsuit with her right upper area uncovered. Her mother, who has short dark hair and is wearing a dark sleeveless V neck tunic style frock over a light coloured long sleeve top, is behind and bending over the change table holding her babes right outstretched hand. She is also holding a dummy in that hand. The mother's left extended arm and hand is on the left shoulder of her babe. The baby, who has sparse hair, is looking up at her mother; signs of a skin condition can be seen on areas of the babes face and head.Photographer stamp. Quote No. DO 50royal district nursing service, rdns, rdns wound care

The design of this and other similar treadle powered dental engine (or dentist drill) was in common use by dentists from the 1870’s into the 1920's. When electricity became accessible to most communities the electrically powered dental engines began to take over from the treadle power. Over the ages teeth were extracted using picks and scissors and other gouging instruments. Bow drills, hand drills and even a "bur thimble" drill were later used to prepare cavities for filling. Some drills were made bendable by attaching flexible shanks between the metal bur and the handle, giving access to the teeth at the back of the mouth. Other mechanical devices were introduced along the way, such as clockwork drills, but they were hard to handle and inefficient. Over the centuries “dentistry has been performed by priests, monks and other healers. This was followed by barbers; the barber’s chair may well have been the precursor to the dental chair. “(SA Medical Heritage Society Inc.) In 1871 James Morrison patented the first commercially manufactured 'foot treadle dental engine', the first practica dental engine although others had been introduced as early as 1790 (by John Greenwood). Handmade steel burs or drills were introduced for dental handpieces, taking advantage of the significant increase in the speed of the drill. In 1891 the first machine-made steel burs were in use. The treadle drill reduced the time to prepare a cavity from hours to less than ten minutes. In 1876 the Samuel S. White Catalogue of Dentist Instruments listed a 12 ½ inch wheel diameter dental engine, with 14 bright steel parts, for sale at US $55 In today’s market, this is the equivalent to US $1200 approx. The specifications of that dental engine are very similar to the this one in our Flagstaff Hill Maritime Village’s collection. It is interesting to note that workings of a similar treadle dentist drill were used and modified to power a treadle spinning wheel of one of the volunteer spinners at Flagstaff Hill Maritime Village. The foot treadle dental engine was a milestone in dental history. “Historic importance of treadle powered machines; they made use of human power in an optimal way” (Lowtech Magazine “Short history of early pedal powered machines”) The invention of a machine to speed up the process of excavation of a tooth lead to the invention of new burs and drills for the handpieces, improving speed and the surgical process of dentistry. They were the fore-runner of today’s electrically powered dental engines. This treadle-powered dentist drill, or dentist engine, is made of iron and steel and provides power for a mechanical dental hand-piece that would be fitted with a dental tool. The drill has a three footed cast iron base, one foot being longer than the other two. A vertical C shaped frame is joined into the centre of the base, holding an axle that has a driving-wheel (or flywheel) and connecting to a crank. A slender, shoulder height post, made from telescoping pipes, joins into the top of this frame and is height adjusted by a hand tightened screw with a round knob. On the post just above the frame is a short metal, horizontal bar (to hold the hand-piece when it is not in use). A narrow tubular arm is attached to the top of the stand at a right angle and can move up and down. At the end of the arm is a firmly fixed, flexible rubber hose protected for a short distance by a sheath of thin metal. At the end of the hose there is a fitting where the drill’s hand-piece would be attached; a small, silver coloured alligator clip is also at the end. A treadle, or foot pedal, is hinged to the heel to the long foot of the base, and joined at the toe to the crank that turns the driving-wheel. There is a spring under the toe of the treadle. The metal driving-wheel has a wide rim. Touching the inside of the rim are four tubular rings that bulge towards the outside of the driving-wheel, away from the pole, and all meet at the hub of the axle. The axle is bulbous between the inside of the driving-wheel and the frame then passes through the frame and is attached on the other side. The driving-wheel has a groove around which a belt would sit. The belt would also fit around a pulley on the arm, at the top of the post. The pulley is joined to a rod inside the arm and this spins the drill's hand-piece and dental tool holder. The two shorter feet of the base are made from a long metal bar that has been curved outwards, and its centre is bolted to the base of the pole. Under the ends of the curved legs of the base are wedge shaped feet. The driving-wheel is decorated in light coloured paint on both sides, each side having three sets of floral decals evenly spaced around them, and each about a sixth of the wheel's circumference. Similar decoration is along the sides of the frame. The foot pedal has decorative cutout patterns in the centre of the foot and at the toe. On the long foot of the stand is some lettering with a fine, light coloured border around it. The lettering is hard to read, being a dark colour and flaking off. There are also remnants of fine, light coloured flourishes. The foot pedal has lettering of the maker’s trade mark cast into the metal at the ball of the foot. Lettering on the base is peeling and difficult to read. The foot pedal has a trade mark cast into it that looks like a combination of ‘C’ , ‘S’ , ‘A’, ‘R’. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dentist, teeth, dental drill, dental engine, treadle drill, foot powered drill, treadle engine, orthodontics, dental surgery, james morrison

Six page typed document, signed by Albert Richardson, and a handwritten copy of same. Written on top right of typed document: 'These recommendations all adopted by General Meeting Bendigo and District Tourist Association, 30.11.1967' Document describes the 'Central Nell Gwynne area, situated at West Bendigo, approximately 150 yards north of main Calder Highway to Mildura, local section Marong Road, which is a public purposes reserve under Section 14 of the Land's Act 1958. The steel poppet legs donated by the late Jack Barker to the City Council for preservation be a permanent reminder of the gold mining era and containing the engine beds and 20 head crushing battery foundation, be developed as a mining museum for tourists, educational and historical purposes'bendigo, mining, central nell gwynne

Yields information the operation of trams prior to the closure of the SEC system near the Railway Station. Has a strong association with the work of the Association of Railway Enthusiasts.AGFA blue and white plastic mount, 35mm slide, from the Association of Railway Enthusiast's film strip titled "Provincial Tramway Film Strip" of No. 14 southbound in Lydiard St North with a Twin Lakes and an auxiliary board advertising a Fete. No. 31 is northbound to Lydiard St North with an auxiliary board "Trotting Bray Raceway Friday Night". Photo taken Sept. 1971. In the background is the railway level crossing signal gantry and Reid's Coffee Palace. Note the letter box at the railway station yard. The film strip notes (Reg. Item 2560), provided the following caption details: "No. 31 and 14 cross at the end of the double track outside the Ballarat Coffee Palance - Oct. '68" Photo Max Michell Slide No. 7 Various notations by John as to the slide number and the trams in pencil and ink.tramways, trams, are, film strip, level crossings, lydiard st north, bray raceway, tram 31, tram 14