Set of three full colour posters advising passengers to wear face masks on public transport. 1 - must wear face masks on public transport - 2022 2 - similar with all modes of transport represented - 2020 3 - face masks must cover nose and mouth - 2020 4 - must wear face masks while travelling - 2021Demonstrates the methods that Yarra Trams & PTV use to advise passengers to wear face masks on public transport.Set of four A3 size colour posters about Wearing face masks on public transportposters, tramways, passengers, covid-19, behaviour, public transport

If you can provide information on this artist or artwork please use the link below. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Three dimensional sculpture of masks.art, artwork, sculpture, portraits

This mask belonged to Tina Howard, 1922-2015, Tina lived in Glasgow during WW2 and was required to carry the mask at all times.This is an original maskA gas mask in a vinyl 'V' shaped cover, On the mask VRB 4.40, mediumgas mask, tina howard, glasgow

Gas mask similar in style to 1339.1, possibly dating from the 1940s. This mask and associated case were intended for noncombatant use i.e. for use by civilians during wartime.Khaki colour gas mask constructed from cylindrical tin with open valve filter, attached to a plastic mask which attaches to the face with adjustable canvas straps. Mask includes two circular cut outs with plastic windows with valve on left hand side. Printed instructions on canister. “MED ADULT” embossed on top centre of the mask component. On interior of mask, “US MI/LOT/7 3SC.”gas mask, equipment, civilian, gas warfare, second world war, world war two, world war ii, mustard gas, chemical warfare

Four uniformed Australian soldiers pose for a photograph during World War One. The two seated soldiers wear gas masks. Standing left to right: Gordon Spittle, Harry Holmes Sitting: Jack Nase, Joe FawcettVerso: Snap taken in our fighting headgear. We always were (sic) the iron helmets when near the trenches, and the front helmets are gas helmets.chatham family archive, chatham, holmes, world war, world war 1, world war i, world war one, france

The Laryngeal Mask Airway was invented in 1983 by British anaesthetist, Archie Brain.Yellow plastic tubing with a pink rubber laryngeal mask attached. There is an additional fine yellow tube threaded through the base of the rubber mask. Printed in black in along side: #4 LARYNGEAL MASK AUTOCLAVABLE INTAVENT 3:1laryngeal, brain, archie, endotracheal intubation, autoclavable

This gas mask was the standard issue gas mask for the Australian Army prior to and going into the Second World War. The mask featured two eye pieces made out of splinter-less glass which were removable to allow for decontamination of the mask without damaging the splinter-less glass eye pieces. The filter box was manufactured by Willow in Melbourne. The mask features a tissot system, which uses air provided by the intake assembly to defog the eyepieces. Air breathed out passes directly through the outlet valve which was designed work as voice membrane in order to enhance the speech of the user Unknown to most is that the GSR series of masks were manufactured in Australia rather than being imported from the United Kingdom. This was mainly due to the long travel distance between the UK and Australia, as well as the fact that the UK could not afford to give out masks during the war. The majority of the masks were manufactured at the Commonwealth Ordnance Facility Maribyrnong in Melbourne.This mask is representative of Australian manufacture during WWII. It is part of the story of Australian military history.Gas mas with dark coloured rubber mask. The back of the mask has elastic harness with 6 straps. They can be tightened or loosened to fit. The front of the mask has two large glass eye pieces with metal rims and a metal outlet valve. A concertina fabric and rubber tube leads from the outlet valve to a reddish brown box which is the filter. One side of the mask has the word 'Normal' stamped into it.Mask: NORMAL (on left side) / DPR 12/40 (right side) Back of harness: No. 4 III / 5-11-49 Filter canister: No 4A / 1940 / E VIwar, wwii, world war two, second world war, adult gas mask, military, portland, glenelg shire, army

The outbreak of Coronavirus COVID-19 in Melbourne in 2020 resulted in changed behaviours by the population. These changes included, at least in Kew, the placing of teddy bears in windows. In the final months of 2020, an easing of restrictions allowed members of the Kew Historical Society to meet face-to-face, including during the annual Christmas Dinner, on this occasion at the Greenacres Golf Club. At the event a decorated mask competition was held. Individual masks were donated by a number of attendees for the collection.A series of hand-made and adapted commercial masks worn during the COVID-19 pandemic in Melbourne at the annual Xmas Party of the Kew Historical Society. Attendees were advised that an award would be made to the creator/wearer of the best decorated mask. This was won by Jan Walker the owner of the pink patterned fabric beaded mask. The makers of each mask is identified in the Media Reuse credit underneath the image.masks, covid-19, kew historical society -- celebrations

H. Bellamy Gardner, an anaesthetist at the Charing Cross Hospital, was the first to use open ether in England and was responsible for popularizing the technique. Bellamy Gardner's mask consists of a wire frame which was covered with layers of gauze. He recommended constructing a face-pad consisting of several layers of gauze which were rolled together and tied to make an oval. This was applied to the face and the mask rested on the top. Ether was then administered directly on to the mask.Oval chrome-plated steel wire frame designed to fit around a face. The wire-framed dome has both vertical and horizontal wire components to sit over a patient's nose and mouth. Ether was applied to a gauze pad which was held securely in place by a hinged wire lid. This is a modified version of Bellamy Gardner's original mask.Etched on clasp: BELLAMY / GARDNER'S / ETHER MASKether, gauze

A general civilian Gas Mask for protection against gas warfare agents, tear gas, mustard gas etc..1) Face gas mask, enclosed with clear plastic eye pieces, attached cylindrical gas filter canister, head straps. .2) Protective cover, shaped canvas bag with webbing carry strap with adjustment buckle. .3) Small instruction booklet, 16 pages..1) Warning and instructions information printed on cylinder. .2) On bag, “U.S Non Combatant Gas mask M1A2-1-1” .3) On front cover, “Your Gas Mask”gas masks, civilian, u.s

Hardcover book with a blue fabric cover. Black printed text and a silhouette of a man and a dog. 311 pages.fictionsydney horler, short stories, fiction

The mask is of the type issued to civilians for air-raid precautions in Australia during World War II.A gas mask is a piece of personal protective equipment used to protect the wearer from inhaling airborne pollutants and toxic gases, this particular type believe to possibly be a M1A 2-1-1 designed for civilian use during World War II.Child size respirator / gas mask comprising rubber head harness with yellow tinged celluloid eyepieces and elasticized straps to attach around head at back. A grey metal gas filter cannister is fitted to the front of the mask, printed with an extensive inscription about use and cleaning. Grey plastic air vent to the side of the head harness.Top front of rubber head harness embossed is 'CHILD' Extensive inscription printed on gas filter cannister. 'THIS GAS MASK IS FOR PROTECTION AGAINST CHEMICAL WARFARE AGENTS ONLY, DISPERsED IN FREE AIR.' Instructions on fitting and cleaning follow.second world war, world war ii, child gas mask, army, civilian

This gas mask dates to 1942 in the Second World War. This mask is representative of a style of gas mask that was widely distributed during the Second World War, and can be found in other Australian collections. Rubberised face mask with two circular plastic windows with metal rim for sight by wearer. The mask is fitted by six black elastic straps with red and yellow stripes, which are attached via metal buckles at six points at the top, middle and bottom of the face. Straps converge on rubber backed fabric cross-shaped component which is stamped. Over mouth area is a filter comprised of several layers of metal sheeting with holes. At chin, a metal fitting fits into a black rubber concertina tube which fits into the top of a rounded rectangular container with ribbed edges. Both attachment points have what appears to be adhesive fabric tape wrapped around the closure, possibly to make the system air tight.On cross-shaped component, "No 410/22-12-42" Stamped on mask, "O.T.R.C/6/42", "NORMAL" Filter mask stamped with, "EBRO/1942", "No 4/G.P. 1942" Canister stamped with "WILLOW/[broad arrow]/ML42(?)3/GS174". On canister base "No4A/WILLOW/1942/257/EVI" gas mask, breathing apparatus, chemical warfare, second world war, world war ii, world war 2

Inscribed with Lot 149 Avon 642on the base of the mask, with No.4 III B7/42 Pat Nos. 296,493 & 305,080 on the mask straps.

This mask was obtained by Charles Quon, probably from Hong Kong, and used by the Young Chinese League in their processions.This mask is significant for its links to the Chinese Young League. The League was formally established on 4 October 1932 to to promote free social intercourse and goodwill among its members and their mutual improvement. Membership was open to all persons, with one or both parents or grandparents born in China. Wives of Chinese members were permitted as members with the same privileges. It was a significant social organisation for Chinese-Australians in Melbourne in the mid to late twentieth century.A costume mask of a male character. He has a silver headdress with pink, green and yellow decorations. He has black horns, a black face with pink cheeks, red lips and markings on his forehead, nose and chin. The eyes has been cut out for the wearer to see out of. There is a strap that runs behinds the mask.young chinese league, melbourne, victoria, australia, processions, masks

Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Gas mask with brown cloth covering & rubber face cover. 2 circular, clear, glass eye pieces with threaded mounts. Mask is secured to head with black elasticized straps. Metal breathing plate is attached to a red metal canister via a black ribbed rubber tube. Side port on LHS face mask. Port is covered with a black cap. Printed on head straps: No 4 MK(2) 6/41 PAT. Nos 296463 & 305080 Printed in black under chin & face mask: ? L(above)2 ? & Co. SMAL SPEC (?) T.MIC LOT No 198 ? 27/6/41 Stamped on top of canister: Z 21/11/41 AT Stamped on canister base: No 4A M 1941 U6 EVIequipment, gas, masks, military

A World War 2 issue anti gas mask complete with respirator contained in a canvas bag, also includes anti-dimming cannister The base of the mask is stamped 1942, the mask itself is dated 2-4-42gas, mask, holding, bag

The Bellamy Gardner mask was in use by 1905 and was the first British mask for the open administration of ether. This mask combines the features of the Bellamy Gardner mask with a tower frame designed by Ogston. The Museum's "Penn catalogue", circa 1970, describes this mask: "this followed closely upon Ferguson's lead, but has an enormous amount of "dead-space" contained within the apparatus."Open wire ether mask with inner dome (Bellamy Gardner mask) and outer wire frame tower (Ogston frame).Moulded into connector clip: BRITISH MAKEbellamy gardner, ogston, open ether administration, henry peter penn

Manufactured by The Ohio Chemical and Manufacturing Co. The mask was invented by Arthur H. Bulbulian

This style of mask was developed in Britain and began to appear from the 1930s, though original models may have been produced in the 1920s. Various patents for this style of mask were still being filed in the 1960s, so they were used for a considerable period of time. It is possible that the original filter pads for these masks contained asbestos, as they supposedly utilised 'fire proof' materials. Asbestos was already in use in other British respirator masks at this time. Original cataloguing information believed this item to be an eye shield, but further research has indicated that this is not the case.Mask consists of a metal plate designed to cover the lower half of the face. There is a recess along the top edge of the plate designed for the nose to sit in. There is a large oblong opening with rounded corners at the centre of the mask, which is a mouth opening to assist speech and is the main air intake. There are five round holes on either side of the mask, likely included to decrease the mask's breathing resistance for the wearer. Rounded slots at each edge of the mask are threaded through with an elastic strap, used for attaching the mask to the face. This mask would have been used with a filtering pad attached, but the pad is missing.

WW2 General Service Respirator (GSR) Gas Mask WWII made in 1939 and the Canister was made 1941. Mask made of black rubber with glass eye slots with metal rims. Metal nost piece. Covered in khaki fabric. Elasticized straps to hold mask in place, with a tan circular cloth covered rubber tube that connects to the canister. Tin canister is oval shaped reinforced with ridges, red/brown in colour.Back of mask: N-4II / ML M MAY 39gas mask, equipment, gas warfare, second world war, world war two, world war ii, mustard gas, chemical warfare

Canvas shoulder bag used to carry rubber gas mask within. Mask used by military to prevent inhaling noxious fumesAs manufactured by GMH during world war 2Canvas bag used for carrying a gas mask. Two pocket design, two metal studs on front for sealing pockets. Gas mask contained within bag.VI GMH 1941bag, military, gas mask

The inner dome of the Ferguson's mask was covered in an ordinary vaporising surface of gauze, while the outer tower (circular ring) was enveloped in a domette bag closing at the top to exclude the air so that the ether vapor could be concentrated.Wire mask for ether inhalation. The handle for the mask is made from the same wire as the mesh and there is a circular wire ring above the mask.mask, ether, robert ferguson, inhalation, ramsay surgical limited

Gas mask contained in a canvas bag manufactured and used during the second world warBag manufactured by GMH 1942Canvas bag with webbing strap, canvas cover, with brass press studs. Inside bag gas mask with items for maintaining the mask.V11 GMH 1942military, bag, gas mask

This is a simple metal mask with an ether chamber surmounting it. The patient breathes air down through the variable orifice over the surface of ether and in through the variable orifice over the surface of ether and in through the inspiratory valve. Exhalation was by means of the expiratory valve placed in the centre of the mask. All channels are extremely small and would offer considerable resistance to respiration.Metal inhaler with shaped rim edgeEngraved by hand into side of mask: DEWEE'S ETHER / INHALER.. 1901. Stamped into side of mask: J.E. LEECO / PATD. NOV. 12-1901 / 400ether, inhaler, ramsay, dewee, leeco