Builders plate from locomotive "Delta" No. 1.Historic - Perry Engineering Locomotive Builders plate used on Steam Locomotive "Delta" No. 1.Perry Engineering Co. Builders Plate Made from cast IronMade by Perry Engineering Co. 7967.50.4steam engine, perry engineering, puffing billy, builder plate, delta

Produced for the running of locomotive 7A, dressed as 9A on the Thomson to Walhalla portion of the Moe to Walhalla narrow gauge railway for the Moe to Walhalla railway centenary in 2010. Historic - Puffing Billy Railway - Replica Victorian Railways Builders PlateHistoric - Puffing Billy Railway - Replica Victorian Railways Builders PlateReplica Victorian Railways Builders Plate Made from cast aluminium with blue and white paint.Manufactured at the V R Newport workshops 1910puffing billy, builders plate, moe, walhalla, 7a, 9a

Number Plate 12A Loco: 12A In service Monday, 23rd December 1912 Livery Black with Red Owner Puffing Billy Gauge 762 Status Under Overhaul 12A Built in 1912 and painted Canadian red & dark brown, this locomotive was issued to the Colac to Crowes line, but over the years saw service on all four lines. It was withdrawn from service in 1954 at Moe and sent to Newport Workshops for storage where it remained until 1972. After overhaul at Ballarat North Workshops, it was brought to Belgrave in 1973 where it saw continuous service until withdrawn in 1982 for a complete rebuild. It was returned to service in 1992 in close to its early 1940s condition with all-over Black livery. It will be returned to its post WWI condition with low bunker, narrow ash chute, steel cowcatcher and Canadian red livery.Historic - Victorian Railways Locomotive Number Plate used on Steam Locomotive 12A Number Plate 12A Brass builders plate with black background 12Apuffing billy, 12a, number plate

Class Leader of the R Class Steam Locomotive, designed by the Victorian Railways and manufactured in Glasgow, Scotland by the North British Locomotive Company. One of 70 Locomotives constructed from 1951 to 1954, becoming the last steam mainline express passenger locomotive on the Victorian Railways. The first 4-6-4 wheel arrangement used by the V.R. Replica Builder's Plate for Steam Locomotive R700 Key TagLocomotive R700 North British Locomotive Company Ltd. Glasgow 1950 No. 26994builder's plate, victorian railways, steam locomotive, r class, north british locomotive company

From the 1982 Australian Children's TV Series Come Midnight Monday where 12A stars as "Wombat".Historic - Name Plate 'Wombat" - From the 1982 Australian Children's TV Series Come Midnight Monday where 12A stars as "Wombat".Name Plate - Wombat Thin rectangular black and white builders plate.Wombatpuffing billy, wombat, come midnight monday, name plate, 12a

Manufactured by the Adelaide tramcar body builder, Duncan and Fraser to indicate or advise passengers who built the tram. Were generally located above a doorway of the tramcars. Demonstrates the method of recording who built the tramcar body.Oval shaped engraved Builders plate with the words "DUNCAN & FRASER BUILDERS ADELAIDE" . Has two 2mm diameter holes on either end of the plate.builders plate, duncan & fraser, adelaide, tramcar

Metal plate - aluminium - printed with black metal ink, Comeng Dandenong builders plate used on A or B class trams with AEG traction equipment.trams, tramways, builders plate, comeng, a class, b class, aeg

Demonstrates the method of recording who built the tramcar body.Rectangular cast brass Builders' Plate with raised edge, inner lined letters in capitals "DESIGNED AND MANUFACTURED AT THE TRAMWAY'S BOARD WORKSHOP PRESTON" Four mounting - countersunk in corners - matt dark grey background - paint?On rear in faint purple crayon "460"tramways, trams, builders' plate, melbourne, mmtb

Builders Plate, sign - cast aluminium with raised letters within raised border and two screw holes on each side. Black painted background. "Comeng / Duewag" with "4000/120" stamped for a B class tram or contract 4000.trams, tramways, signs, tramcars, tramcar bodies, new trams, b class, duewag, comeng, commonwealth engineering

Used by the company on the tramcar bodies it built for the MMTB in the 1920's. Second copy marked on rear "Ex W2 268"Yields information about the construction of W class trams.Builders Plate, sign - pressed brass sheet with burnished background around the raised letters - "Built by JAMES MOORE & SONS Ppty Ltd. City Rd. South Melbourne". Has screws holes in each corner. Two copies held.Has on the rear in black text pen "265"trams, tramways, signs, tramcars, tramcar bodies, james moore, new trams, w2 class, tram 268, tram 265

Used by the company on the W class tramcar bodies it built for the MMTB in the 1920's. Second copy ex W2 322. See item 2430 for another example. Demonstrates the method of recording who built the tramcar body.Builders Plate, sign - pressed brass sheet with burnished black background around the raised letters - "Coach Work by Holdens Motor Body Builders Ltd Adelaide & Melbourne". Has screws holes in each corner. Two copies held.builders plate, adelaide, tramcar, signs, tramcars, holdens, new trams, w class, tram 322

Factory Show-Rooms. Established 1853? Carriage Builders. Plate 236 Chuck Photo Series.l.e. cutter, armstrong street, building, manufacturing, ballarat

Builders Plate, sign - pressed brass sheet with burnished black background around the raised letters - "Coach Work by Holdens Motor Body Builders Ltd Adelaide & Melbourne". Has screws holes in each corner. Used by the company on the tramcar bodies it built for the MMTB in the 1920'sHas on the rear in black text pen "339"trams, tramways, signs, tramcars, tramcar bodies, holdens, new trams, w2 class

Plate fitted to W class trams built at Preston Workshops by the MMTBDemonstrates a MMTB Preston Workshops builders plate that were fitted to Trams built at the Workshops.Builders Plate, sign - cast brass with raised letters within two raised lines and four screw holes in each corner. Black painted background. "Designed and Manufactured at the Tramways Board Workshops Preston" Three copies held. See Reg Item 5041 for replica plate.Has on the rear in black text pen "239". Copy 2 has chalk marked "417" on rear and Copy 3 has with a label on the rear "Off W2 549 Burnt" trams, tramways, signs, tramcars, tramcar bodies, mmtb, new trams, w2 class, tram 459, tram 417

Digital image of a Photograph of the interior of one of Pengelley-built trramcars that operated in Geelong. Photo by Keith Kings. Shows the door arrangements and the location of a builders plate.Yields information about Geelong tramcars that were built by Pengelley of Adelaide.Digital image of a colour slide - Keith Kings K(f)(83)trams, tramways, geelong, pengelley

Digital image scan of a Keith Kings slide showing the interior of a Geelong Pengelley tram in particular the detail of the end seat arrangement, doors, pay as you enter sign and the location of the builders plate.Yields information about the interior of a Geelong Pengelley tram.Digital image - Keith Kings number K(f)(83),geelong, pengelley, trams, tramways, builders plate

Demonstrates the method of recording who built the tramcar body.Brass cast Builders' plate with raised letters on both sides - " J.M. JONES' SONS WEST TROY N.Y." Rounded on one corner. Has small lug on both sides on square end - window pull?? On lower edge, has two holes, countersunk on one side, See Tramways of North Sydney. - I. MacCowan 1990In pencil on non countersunk side "TRAM No. 15"tramways, trams, builders' plate, j.m. jones, ballarat??

Replica Builders Plate, sign - cast brass with raised letters within two raised lines and four screw holes in each corner. Black painted background. "Designed and Manufactured at the Tramways Board Workshops Preston" Two copies held, both within plastic heat sealed envelopes with small label "Replica $20-" Produced by Tony Smith of the MTPA, c2010, cast by Hasco Foundry, Ballarat.trams, tramways, signs, tramcars, tramcar bodies, mmtb, new trams

Photocopy of a three page article relating to the light railway that ran from Parramatta River Sydney to Mellor's Meadowbank factory, that appeared in 'Light Railways' magazine No. 143 of Oct. 1998, pages 3 to 5. Included in article is a stylised illustration of the factory and its location, photographs of two surviving Meadowbank Manufacturing Builders plates from NSWGT tramcars (J class and P 1667). Site now part of Meadowbank TAFE college.trams, tramways, meadowbank, tramcar manufacture, light railways, railway vehicle manufacture

Yields information about the appearance of a 22E maximum traction truck on a Geelong Bogie TramBlack and white digital print from scan of a donated negative showing the Maximum Traction 22E truck of a bogie tram, parked in the depot area. Assumed photo taken on the same day as the others - 21-8-1955, shows the Builders Plate and the SEC logo. Black and White prints made from scan of negative. Original Negative stored with Negatives. Negative scanned at hi res 4/6/2020 and image updated.On left hand side of the negatives in ink is "EH 34"tramways, trams, geelong, depot, tramcar bodies, 22e trucks, sec

Handwritten letter on lined or ruled quarto paper with punch holes on the left hand side. Year of letter not known or who wrote it. Has in pencil "Maritaina?" and "22/11 - Roomette" under the letter which has been written in ink. Has notes regarding a visit to Melbourne?, a MMTB annual report of 1952. Notes builders plates at Preston workshops and austerity buses. Has a small sketch of a rail or tram lines in lower part of the letter. trams, tramways, melbourne, letters

Carriage & Coach Builders. Steam Coach Factory. Plate 369 Chuck Photo Series.w. leach & son, albert street, creswick, building, persons, vehicles, manufacturing

This wagon is linked to Mr Stanley James Bell via his father Mr John Bell, who owned "Warrumyea" at Wangoom. It is believed that Stanley grew up and worked for his father at this property, eventuality inheriting his father's death in 1920. This wagon was likely used at Mr Stanley Bell's property “Warrumyea” at Wangoom around 1920-1940. The wagon was donated in 1984, at which time it was noted as having a brass plate inscribed "Jas", which name Stanley was known by. Also, a painted on the wage was “S J Bell Wangoom”. Remnants of the original paint colours of blue and yellow show on the photograph, which was taken at the time of cataloguing. Mr John Bell Snr from Plymouth, England, arrived in Portland, Victoria, around 1860. He had served in the British navy as a lad for a number of years. On arriving in Australia he travelled to the Wangoom district where he lived for many years. Mr J Bell worked for 20 years as herd manager at “Wangoom Park”., for Mr F Tozer (1843-1954), one of the original pioneers of the western district. He went on to pursue dairying and general farming at his property “Warrumyea” Wangoom. Bell’s son Stanley James Bell went to the Wangoom School. His first reader from this school, published in 1909, has his name inscribed in the flyleaf “Stanley J. Bell, Warrumyea, Wangoom” and is now in the collection of the Warrnambool & District Historical Society. Stanley went on working the property “Warrumyea” and eventually purchased “Wangoom Park” in 1956, where his father had been employed years before. Mr S J Bell died in 1968.The wagon is significant for its association with the farming history of Wangoom and the Warrnambool area in general. Also, the wage is significant for its association with one of the early families that settled in the Warrnambool area and their contribution to the dairying and general farming industries that sprang from their efforts. The wagon has a good provenance linking it to Mr Stanley James Bell and is also a good example of how goods were transported using horse-drawn vehicles at the beginning of the 20th century.Four-wheeled wagon or cart,12 spokes in each wheel, wooden axle with rear hub brake. Hinged and chained tailboard. Wheels have metal rims. Metal frame and wooden superstructure. Wagon has two pairs of staves. Wooden shelves, one missing with turntable. Small toolbox in front. Made by Kelly and Preston of Ballarat. Metal nameplate of the owner attached, "Jas" (S J Bell of Wangoom).. Original inscription, now obscured, was painted “Kelly and Preston Builders Ballarat”. Metal plate inscribed "Jas", and "S J Bell Wangoom". flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wagon, sj bell, stanley james bell, wangoom park, warrumyea, first reader, john bell 1830-1920, stanley james bell 1904-1968, warrnambool pioneers, f tozer, western district, kelly and preston of ballarat

Set of three Black and White photograph, mounted onto grey impressed and lined, brown rear, card of equipment at the Essendon or Ascot Vale Power House operated by The North Melbourne and Electric Tramways and Lighting Company. Photo by "Darge" Photos, 175 Collins St Melbourne, printed on the bottom right hand corner. .1 - Switchboard and wiring at the one end of the power station with attendant. .2 - View showing the engines and steam control equipment. (images i2 and i3 - close up of builders plate) .3 - View showing the generator ends of the engines (images i4 and i5 - close up of the buildings plate) - Browett and Lindley of Manchester, main engines. Reference photo on page 12 of "A short history of The North Melbourne Electric Tramways and Lighting Company Limited" - K.S. Kings, edited by Dean Filgate Dec. 2016.trams, tramways, power station, equipment, essendon, nmetl

This nameplate was attached to the steel steamer Matthew Flinders I, a Suction Hopper Dredge used for pumping up sit and sanding from seabeds. It was donated by the Marine Engineer, Neville Dodds, from Ports and Harbours, from the Matthew Flinders I. The Matthew Flinders was constructed by Morts Dock & Engineering Coy. Ltd in Sydney, New South Wales. Identified as Ship No. 40, the dredge had twin screw engines that were made in Sydney. Its gross tonnage was 1180. It was launched on July 15th, 1916, and registered in 1917 at the Port of Melbourne by the owner, the Department of Public Works in Victoria. Unlike bucket dredges, the Matthew Flinders did not use permanent moorings but instead had bow and stern anchors. It travelled forward on the bow anchor, taking up a strip of even-depth wilt from the bed below. A local newspaper noted that the Matthew Flinders has many advantages that were especially useful for its work at Warrnambool. Warrnambool Harbour had been experiencing silting and sanding for many years. The problem continued even after the construction of the Breakwater in 1890, which was overseen by New Zealand engineer Arthur Dudley Dobson. Melbourne’s Department of Ports and Harbours sent the new Matthew Flinders to dredge the heavy silting in the Warrnambool Harbour in May 1919. This work was previously done by the smaller dredge, the Pioneer. However, after a month of work, the Matthew Flinders was returned to Melbourne for alterations to make it suitable for work in the heavy seas it experienced at Warrnambool. Both dredges were sent up from Melbourne when required over the years to periodically attend to the silting in the Harbour, but the Matthew Flinders was preferred because of its efficiency. It was still dredging the Harbour even in July 1938. The ship’s original master was J G Rosney. In February 1922 Percy Taylor from Ports and Harbours joined the Matthew Flinders as a Mate. 1923 the master in charge was Captain Dunbar. In August 1926 Percy Taylor was appointed as her Master and was later transferred to the Pioneer as Master in 1933. 1930 the dredges were no longer required as the Harbour was no longer suitable as a port. However, one source notes that the Matthew Flinders was still dredging the Harbour in 1938.This nameplate is significant for its association with the suction hopper dredge Matthew Flinders I, which was used to remove the build-up of silt and sand from the Warrnambool Harbour, allowing shipping activities to continue to operate in the Port of Warrnambool. The nameplate identifies the vessel and shows that it was built in Australia in the early 20th century for use within Australia. The need for dredging in the Warrnambool Harbour was a serious and ongoing problem, as silting continued to happen after a series of measures were taken to try and resolve the issue. Eventually, the Harbour could no longer function successfully as a port.Brass nameplate, rectangular with cut-away corners and moulded text, mounted with screws on timber. The plate is from a vessel, the dredge Matthew Flinders I, ship no. 40, built by Morts Dock & Engineering Coy Ltd in Sydney, and registered in 1917. A small rectangular engraved plaque below the nameplate gives further details of the ship and the donor.On nameplate: "MORTS DOCK / & / ENGINEERING COY. LTD. / SHIP BUILDERS / SYDNEY 1917 / SHIP NO 40" On small plaque: "Donated by / NEVILLE DODDS / PORTS & HARBOURS / MARINE ENGINEER / EX "MATTHEW FLINDERS I"flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, dredge, mathew flinders i, steel steam ship, twin screw engines, nsw, state of victoria, suction hopper, public works melbourne, warrnambool harbour, lady bay, sanding, silting, breakwater, morts dock & engineering co ltd, captain dunbar, ship no. 40, niville dodds, ports & harbours, marine engineer, marine technology, ship relic, percy taylor, matthew flinders, pioneer

This door plate was found at 28 Spence Street, Warrnambool by the builder Ray Hollingsworth, when he was renovating the building for the Warrnambool Presbyterian Church in June 2019. He realized that the inscription had been placed there by Leslie O'Callaghan, probably when he left the premises in 1942 after boarding there for some years. Leslie O'Callaghan (1918-2014) was born in Balmoral and left there at the age of 13 with a scholarship to study at Warrnambool Technical School. He became an industrial chemist, working at the Kraft Walker Cheese Factory in Allansford (Warrnambool Cheese and Butter Factory). His experimental work in cheese cultures over a 45 year period was regarded as cutting edge work in the Victorian dairying industry. Known as 'Mr History', Leslie O'Callaghan was also an important Warrnambool historian, serving as president of the Warrnambool and District Historical Society for 35 years. In later life Les wrote about his time in 28 Spence Street, noting the lay-out of the early building and other boarders at the time. He never mentioned the interesting memento of his time there that he left on the back of a door plate. The Warrnambool and District Historical Society Archives Centre is called 'Les O'Callaghan History House'This door plate with its inscription was found 77 years after the inscription was written. It is of considerable interest because the writer of the inscription was well-known in Warrnambool as a bacteriologist and an historian. He left his own personal historical message and by sheer chance it was found years later. (All the old door plates at the time of the renovation were thrown out and it was fortunate that the builder happened to see the writing on one of them and to recognize who the writer was.)This is a cream-coloured ceramic door plate. It is rectangular-shaped with curved edges at the top and bottom. It has been painted white and has two holes at the top and bottom for the insertion of screws for a5taching the plate to the door. The inside of the plate has handwriting in black pencilLeslie Alexander O'Callaghan lived here for some years 1939-1942 AD. His occupation was as assistant bacteriologist for Kraft-Walker Cheese Coy. at Allansford. Born at Balmoral, 40 miles NORTH of Hamilton, Victorialeslie o'callaghan warrnambool, kraft walker cheese company allansford, 28 spence street warrnambool

The Eltham Shire War Memorial, a tower of remembrance, was built with public donations to commemorate the memory of the fallen soldiers from the shire who enlisted in the 1914-1918 war. The tower is reminiscent of the peel-towers or watchtowers that lined the English-Scottish border from the mid 14th century to around 1600 and is constructed from locally quarried stone. This uncommon and picturesque war memorial, which affords an excellent view of the surrounding district was unveiled by His Excellency the Governor-General (Lord Stonehaven) on November 11, 1926. In July 1922 a deputation of returned soldiers from Panton Hill, presumably the Panton Hill branch of the Returned Sailors and Soldiers Imperial League of Australia (RSSILA), proposed to Eltham Shire Council that the monument should be a cairn of local stone “sufficiently high to form a prominent and conspicuous landmark, and crowned with some suitable device”. Eltham Shire Councillor and President of the Panton Hill branch of the RSSILA, Basil Hall, was credited with being the first to suggest a tower, and with organising a Memorial Park committee to raise funds for the monument in the Memorial Park. A meeting for those interested in the establishing a War Memorial monument in the park was held in January 1924 and the Eltham Shire War Memorial League was formed for this purpose. It appears that the broad and rounded cairn that had been recently built was considered by the League a temporary affair, and not the substantial cairn-as-monument, sufficiently high to form the conspicuous landmark, which had been envisaged by the Panton Hill RSSILA. A design competition was held for the monument. The chairman of the League, Councillor Basil Hall, suggested that the site of the memorial in Kangaroo Ground would lend itself to something rugged, instead of polished stone. By April 1924 thirty designs for a memorial had been received from which three designs were selected and of those, the design by the shire engineer Mr McCormack, for a 70ft tower suitable for construction in rough stone, was chosen. Artist Harold Herbert suggested that a peel tower-like design reminiscent of those along the English-Scottish border would be fitting for the site. Herbert drew up a rough sketch that was approved of, and later, Melbourne architect Percy Meldrum volunteered to draw up the design from sketch to architectural drawings. By January 1925 the Soldiers’ Memorial League had adopted Meldrum’s design for a 50ft high tower. Meldrum had also offered his design and supervision of construction free of charge. The Shire provided the stone to the builders, which was a gift quarried from land owned at Kangaroo Ground by Dr Ethel and Professor William Osborne The Shire of Eltham War Memorial, a tower of remembrance, and honour board were unveiled on November 11, 1926, by the Governor General Lord Stonehaven. At this stage a temporary honour roll was painted on the panels on either side of the tower entrance. In September 1930 bronze plates were added above the portal with the names of men who fell in the 1914-18 war. On November 16, 1951, the Governor of Victoria, Sir Dallas Brooks re-dedicated the war memorial tower and unveiled the names of men who gave their lives in the 1939-45 war. Two additional bronze plaques which recognise service in the armed conflicts of Korea, Borneo, Malaya, and Vietnam were unveiled November 11, 2001, by the Governor of Victoria, John Landy, A.C., M.B.E. The tower was first used for fire spotting activities following the Black Friday bushfire in January 1939 in response to a request from Mr R.D. Ness, secretary of the Kangaroo Ground bush fire brigade, who asked Council that the tower be used as an observation tower for detecting bush fires, and asked Council to arrange a telephone to be installed. It was suggested that if the Shire were to appoint a caretaker for the Memorial Park, his duties could also include raising the alarm in the event of a fire. Later in 1939 Council applied for a radio transmitter, which the Forestry Commission planned to install at vantage places throughout the state. The first dedicated fire spotter appointed from December1948, was Mr Smith of Warrandyte. A prefabricated glazed cabin was installed in 1974, which involved the removal of the original stone structure around the rooftop exit door. A new fire spotting cabin, which included the latest technology, was installed soon after the 2009 Black Saturday fires and is manned by CFA personnel on high fire danger days. Covered under Heritage Overlay, Nillumbik Planning Scheme. Published: Nillumbik Now and Then /​ Marguerite Marshall 2008; photographs Alan King with Marguerite Marshall.; p123This collection of almost 130 photos about places and people within the Shire of Nillumbik, an urban and rural municipality in Melbourne's north, contributes to an understanding of the history of the Shire. Published in 2008 immediately prior to the Black Saturday bushfires of February 7, 2009, it documents sites that were impacted, and in some cases destroyed by the fires. It includes photographs taken especially for the publication, creating a unique time capsule representing the Shire in the early 21st century. It remains the most recent comprehenesive publication devoted to the Shire's history connecting local residents to the past. While published in the book in black and white, this collection features the original colour digital photographs. nillumbik now and then (marshall-king) collection, garden hill, kangaroo ground, memorial park, shire of eltham war memorial

Type Improved Tribal Class Destroyer Laid down 10 February 1940 Launched 7 February 1942 by Mrs Forde, wife of the Minister for the Arm Builder Cockatoo Docks and Engineering Co Ltd, Sydney Commissioned 23 November 1942 Displacement 1,970 tons Length 377 feet114.91 m 11,490.96 cm 0.115 km 0.0714 mi 4,524 in Beam 36 feet 6 inches Draught 9 feet (mean) Armament Original 6 x 4.7-inch guns 2 x 4-inch guns Anti-aircraft guns As Modernised 1955 4 x 4.7-inch guns 2 x 4-inch guns 8 x 40mm anti-aircraft guns Torpedo Tubes: 4 x 21-inch torpedo tubes A/S Weapon: Squid triple barrelled depth charge mortarWooden Name Plate from H.M.A.S. Warramunga with the name of the ship in Brass Lettering Was mounted on the Superstructure just aft of the second funnel warramunga

In 2010, the Government announced that the ETV fleet would be no longer be funded by the MCA from September 2011, saving £32.5m over the Spending Review period. The Department stated that "state provision of ETVs does not represent a correct use of taxpayers money and that ship salvage should be a commercial matter between a ship's operator and the salvor".Two days after the announcement that the fleet was to be disbanded, Anglian Prince was sent to the aid of the UK's newest and largest nuclear submarine HMS Astute, which ran aground off the Isle of Skye in Scotland during sea trials.Builder's plaque, Imai Mfg Co, for the 'Jaramac 48' - Text is impressed into the front and painted red. A red painted border surrounds the edge of the plaque. A small silver plate is attached to the upper right hand corner with engraved text on it.1979 circa. Jaramac 48 - 4,200 HP, Harbour Tug, Built 1975. Renamed 'Mac Tide 48'JARAMC 48/OWNER J. RAY MCDERMOTT & COMPANY INC/ OFFICIAL NO./ GROSS TONNAGE 554t.84/ NET TONNAGE 71t.00/ CONTRACTOR HASEGAWA & CO., LTD./ BUILDER IMAI MFG. CO., LTD/ HULL NO. SHIP NO. 145" Gold Plaque "DONATED BY/ J Ray McDermott (Aust) P/l)/ 1979"