Metal candle holder with white candle given out as a souvenir of the 2000 Carols by Candlelight concert to official guests. The words 'RVIB Carols by Candlelight 2000' are engraved on the lid.1 silver plated candle holder with candleRVIB Carols by Candlelight 2000carols by candlelight, royal victorian institute for the blind, fundraising

Found at 'Mulvra', a property near Linton belonging to Digory Pendray Roberts. It is believed that the candle-holder was forged in the blacksmith's workshop at the property. Found in the late 1940s and donated to Linton & District Historical Society by Lyle Fletcher, a descendant of Digory Roberts.Iron candle holder, round section to hold candle, with horizontal spike attached, to enable candle holder to be pushed into rocks or clay of mine wall.mining, candle holders

This candle holder would probably be mostly used for a candle placed on a table, cupboard or bench. It is unornamented and so would not occupy any place of importance. Candles and lamps were the chief source of light in households until the advent and use of electricity in the early 20th century. Gas lighting was in use in street lighting and in industry for some time before this. Electric lighting for households became available in Warrnambool in the 1920s but the use of lamps and candles was still prevalent until the middle of the 20th century. This candle holder is of some interest as an example of a household item from times past. It will be useful for display. This is a china candle holder. It has a white glaze and the base is circular in shape. The rim or lip is ridged around the edge. One side of the object is cracked. household lighting, history of warrnambool, candle holder

This is a china candle holder which is a souvenir of Warrnambool with an image on the item of the Warrnambool War Memorial. Czechoslovakia was established as a country in 1918 and began to export china goods in the 1920s and 30s when the label ‘Victoria China’ became well known. The Warrnambool War Memorial at the southern end of Liebig Street was unveiled and dedicated in 1926. It was designed by John King, the Headmaster of the Warrnambool Technical School and erected by the local stonemasons, Wooles and Carpenter. This candle holder is of some interest as an example of the tourist souvenirs that were popular in Warrnambool pre-World War Two. This is a china candle holder with a circular base in brown-orange and white tonings and a fluted edge. The candle holding section is also circular with the same colour tonings and a slightly fluted edge. Inside this are the hardened remains of a candle. The base has a handle attached. On one edge of the base there is a colour image of the Warrnambool War Memorial. The maker’s name at the back has a crown symbol. ‘Soldier’s (sic) Memorial, Warrnambool’ ‘Victoria China, Czechoslovakia’ victoria china czechoslovakia, warrnambool war memorial, history of warrnambool

Metal Candle Holder (Silver) designed in a leaf shapestawell

This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga.This item comes from a collection used by a prominent citizen of Wodonga. It is also representative of a domestic item common in the 1930s.A brass chamber candle holder above a section to hold a standard sizebox of matches.beer steins, domestic items

Before electricity, candles were a primary source of light. They were used to light dinner tables, grand dining halls, and other formal settings. Tapers were essentially wax-coated wicks used to light gas or kerosene appliances or candles. Price's developed its 'Ship Brand' trademark in the 1870s, featuring the image of a clipper ship under sail. Price's candle tapers were made between 1880 and 1910. Price's Candles was founded in 1830 by William Wilson. A long thin vintage rectangular cardboard box of three pieces of used thin Price's Dropless White Tapers Medium, for lighting candles, gas etc. The lid is heavily patterned with blue and white product name and information. The base and the sides have no writing. Manufactured in Great Britain. Inside a patterned circle on the right is 'Price's Patent Candle Company. Limited London & Liverpool.'candles, lighting equipment, tapers, gas lighters

Scandinavian design in furniture and accessories was very popular in the 1960s - 70s as represented by these two minor decorative candle holders of the period.A small example of the very popular designs reflecting Scandinavian influences of the period.In the modern Danish style of 1970s.etched underneath each holder 'Stelton stainless 18/Denmark.' denmark, stainless, ballarat, 1970s, wedding present

This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007.Canvas painting of a girl with blonde hard watching a candle which has just been sniffed out. Signed verso. "Girl with Candle" [signature] Acrylic on canvasart, artwork, rowsell, candle, mel rowsell, available

A battery operated illuminating candle which lights up a small red flame when the red button is depressed. This candle was most likely sold at the Carols by Candlelight concert.1 plastic candle with lightcarols by candlelight, royal victorian institute for the blind, fundraising

Single stem, spun silver made in three pieces, evidence of gildingnon

“My main aim is to develop a sense of understanding in the mystery of the human condition, both in the reality of life and the spirituality of death. My work uses figurative imagery, both painterly and sculptural in the ceramic medium.” (http://gallery.baag.com.au/?p=34)Giuseppe RANERI (1959- ) Born Italy Giuseppe Raneri completed a Bachelor of Arts in Ceramic Design in 1982, followed by a residency at the Meat Market Craft Centre before travelling extensively overseas. Upon his return to Australia he set up his own studio in Fitzroy from 1988-1997. His work includes colourful hand-painted tablewareCeramic candlestick with majolica decoration. ceramics, gippsland campus, giuseppi raneri, jan feder memorial ceramics collection

This pair of 19th century candleholders were presented to Nazareth House Ballarat by J.A.Chalk one of Ballarat's richest 19th century gold-mining entrepeneurs. J.A.Chalk was a partner in the Madam Berry Mines together with Martin Loughlin and William Bailey and was Manager of the Buninyong Estate Co., the Band and Barton Co., the Sebastopol Plateau Co., and the Prince of Wales and Bonshaw Co. mines in 1887. Chalk was a Quaker and benefactor to many Ballarat institutions. He arranged for the Council Chambers to be made available for meetings of the Society of Friends (Quakers) in the mid 19th century.One of a pair of large 19th century ornamented candle holders for use in the Chapel at Nazareth House Ballarat presented by 19th century Ballarat philanthropist and gold-mining magnate.The candleholders are in two separate sections the heavy lead-filled brass base with demountable seven-branched candleholders surmounting the base. The lower portion or base form a single candlestick when the branched top section is removed. The branches are decorated with styalised rose petals and the tops of each base decorated with rims of neo-gothic coronas.Presented with King Regards By J.A.Chalk Ballarat.candleholders, candlesticks, nazareth house, ballarat. j.a.chalk, madam berry mines, goldmining, entrepenauer, buninyong, sebastopol, prince of wales, bonshaw co, quaker, society of friends.

Pewter WMF candle holder in the art nouveau style.stamped underneath.candle, chamber

From the Britannia Mine (Ballarat) Candle remnants from early Ballarat mines are quite rare..1) White/cream candle remnant. Candle mold seams are evident. Stored in green pharmaceutical tin with screw lid. (?) Found when removing for filling motor spaces Camp Street. .2) white candle remnant from the Britannia Mine at Cambrian Hill held in a 'Barker Cake Container; tin. A handwritten note inside the tin indicates 'Piece of Candle from Mullock's Britannia Mine. Ballarat. .2) Piece of Candle The Great Leviathan Quartz Mining CosMine at Cambrian Hill near Ballarat. Picked up by Donald Doyles Mather whilst cleaning out Ballarat South Goldfield Co's Leviathan Shaft when reopening "Great Leviathan in in the year 1948. The candle was last used by miners in the Great Leviathan in the drive where found Year G. Leviathan Closed down "______" mining, candle, lard, great leviathan, donald mather, cambrian hill, great leviathan quartz mining company

This candle holder was probably home made and hung in a kitchen where the candles would be accessible and lit from the wood stove or a fireplace. Candles for lighting would have been in widespread use in Warrnambool until the mid 1920s when electric lighting was introduced and would have been used for a couple of decades after this in areas out of towns and cities where there was no electric lighting. This item is retained as an example of a household item from the early 20th century. It will be useful for display and school visits.This is a rectangular-shaped wooden container with a fitted lid. The container has been painted white but is now peeling in places. The top of the container has an extra wooden piece at the top with a hole in the middle for attaching a cord or string to hang the item on a door or wall. The word ‘candles’ is incised into the side of the container. Inside the container (originally space for six candles) are the remains of three candles with one other candle almost intact and another one intact with a wick. CANDLESvintage household goods, history of warrnambool, candles

Wax tapers were used by early settlers in Moorabbin Shire to light fires, candles and gas lamps. A narrow and shallow, cardboard box with blue and white label on the top. "Price's Dropless White tapers" " Medium" 2ounces "for lighting candles and gas fires". Makers mark is a sailing ship, set in an oval with the words "Ship Brand". Around the circumference of the oval are the words " London, Liverpool, Price's Candle Company Limited.kitchen equipment, lights, candles, fireplaces, early settlers, pioneers, moorabbin, bentleigh, cheltenham, market gardeners

Stable holder for 4 candlesCandle holder - Cast iron - 4 candle capacityNiliron, household lighting, candles

Historically this item was before electricity lighting was available. There is no protection around the candle to prevent wind or air movement from extinguishing the candle flame therefore this means of night illumination was used within a house environment. It could be easily moved from room to room but would have insignificant "candle power" to lighten more than a few metres around it. This item was before kerosene lamps, gas lighting and electric/battery lamps This candle holder would have been used within the homes of Kiewa residences to illuminate the way from room to room where there were no other forms of lighting available. As it is relatively light in weight and with a finger/s grip it is highly portable and was in time replaced by battery powered torches. It was used in a period where home, or local made candles were a necessity of living. This Item was used before battery powered torches were invented. Although candles are still used in the late 20th and after, their fundamental use has changed and they function more as a mood enhancement item or as a back up for an electrical power failure and the alternative battery powered torch also runs out of power.1. This small basin shaped candle holder is formed of metal and sealed with a pale grey enamel skin. It has a black painted edge and finger holder. It has a raised vertical spout for the securing of the candle. The bottom of the basin is contoured from the candle base to the outer edge to allow for melted candle wax to be safely held within the basin. 2. As above. The handle is rusty but otherwise in good condition. candle-holder, portable light enamel household goods

A red circular plastic card holder with a yellow button in the centre. The holder can be leveraged apart so that cards sit comfortably between the two red discs. 1 red plastic playing card holderrecreation equipment, games

Saucer-shaped enamel dish with handle and holder for candle and melted wax.Candle holder, white enamel covered steel, with candle stubcandle holders

Tin construction, with sections for eight glass panels (1 missing, 1 incomplete. Perforated tin panels top and base. steel wire bracket for holding or hanging on top. Steel wire sliding latches on top and base as well as one side, when both are unlatched all sides are hinged and lantern can be folded up for storage. Contains a candle (not original), 2 stamped tin labels.1) Use 1/2 candles only. 2) E.A. Harper & Sons/1916/Redfern N.S.W.lantern, , e, world, war, a, harper, son s, 1916, renfern n s w, candle, folding, one

This coin holder has five holes for holding coins, and was designed to assist vision impaired people to store and find coins.1 black pentagonal shaped coin holderPop Coinassistive devices, equipment

A black curved plastic card holder to assist people holding their cards. It can be placed on either the table or fits into your hand. 1 black plastic playing card holderrecreation, games

Shot gun holder manufactured by Holden and FrostManufactured and sold by Holden and Frost for military, agriculture and civilian useBrown leather shhotgun holder with shoulder strap and handle. Zip pouch to hold bulletsleather, shotgun holder

Although donated with the Volum collection, this candle holder may have not been used on board ship,. The trademark with the trumpet and banner indicates it was made after 1879 (according to reference) by Sheffield manufacturer James Dixon & Sons. Victorian silver electroplated candle holder with candleMaker's mark underneath: Z / Trumpet symbol / J / D / & /S / E / P / B / M / 389 / bvolum collection, portable furniture, geelong, peterhead, scotland, captain, seafaring, whaling

This object was used to light gas burners, lamps, lights etc. The tapers were used to light a burner that was hard to reach. It may also have been used in a church to light candles. This taper and matches holder has no known local significance but is an attractive object and will be useful for display.This is a brass object made in two parts – a rectangular container holding six wax tapers and a squat jar-shaped container for holding matches. The match holder is welded to the taper holder. The tapers are bent or broken in several places. The taper holder has a hinged lid with a brass top. The match holder has an embedded shell-shaped emblem. social history, warrnambool history, metal candle taper