Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection.A black and white photograph tt a Fire Support Base, a digger sorting shell 105mm artillery shell casings for transport back to the 1st Australian Task Force Base at Nui Dat, Phuoc tuy Province. These casings once stacked on pallets were collected by RAAF Huey "slick" helicopters.photograph, 105mm artillery, digger, 1st atf base, raaf, huey helicopter, nui dat, phuoc tuy province, gibbons collection catalogue, denis gibbons, photographer, vietnam war, fire support base, australian task force

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection. A black and white photograph of a Gunner at 1st Australian Task Force Base, Nui Dat, Phuoc Tuy Province, sorting 105mm shell casings returned from a Fire Support Base. The casings were then re-packed into their relevant types and returned to Australia, as scrap metal. (Circa November 1969)photograph, 105mm artillery, 1st atf base, nui dat, phuoc tuy province, gunner, fire support base discovery, gibbons collection catalogue, denis gibbons, photographer, vietnam war

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection.A black and white photograph of a Gunner at the 1st Australian Task Force Base, Nui Dat, Phuoc Tuy Province, sorts 105mm shell casings returned from Fire Support Base Discovery. The casings were then re-packed into their relevant types and returned to Australia, as scrap metal. (Circa November 1969)photograph, 105mm cartridge, gunner, 1st atf base, nui dat, phuoc tuy province, fire support base discovery, gibbons collection catalogue, gunner, photographer, vietnam war, denis gibbons, 1st australian field regiment, fsb discovery, 101 battery

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection.A black and white photograph of a Gunner at the 1st Australian Task Force Base, Nui Dat, Phuoc Tuy Province, throws a 105mm shell casing, returned from Fire Support Base Discovery into its correct pile. The casings were then packed into their relevant types and returned to Australia. (Circa November 1969)photograph, 1st atf base, nui dat, phuoc tuy province, 105mm cartridge, fire support base discovery, gunner, gibbons collection catalogue, photographer, vietnam war, denis gibbons, 105mm howitzer, 1st australian field regiment, raa, fsb discovery

Three brass .5 Cal ammunition casings joined by three link belt clips.On the casings stamped, “L.C.3.8” On the link are two seperate stamping, “ M.9.1 & M.9.2”casings, link belt, .5 cal

Trench Art is the name given to objects manufactured by both soldiers and civilians from shell casings, bullets, shrapnel and miscellaneous battlefield debris, and is predominantly associated with World War I (1914 – 18). The most common material used for trench art are brass shell casings, which, once decorated, can be utilised as vases. Often items will bear an inscription such as the name of a French village or theatre of war and engraved decoration or embossing. There is no known history in relation to this itemLarge brass shell casing with decorative engraving.Engraved - Les Halles D'Ypres 1914-19 with engraving of building possibly town hall or church . Several symbols, numbers and letters imprinted on base of casing. brass shell casing, trench art, world war one, first world war, wwi, ww1, ypres, flanders, vase

Two bullet cassings in metal. Unknown orogin or what weapon was used to fire these bulletsbullet

WW 11 Trench Art vases possibly made from 40 mm shell casings..1) Tall Vase made from shell casing. .2) Tall vase made from shell casing.military armaments, souvenirs, trench art

Large brass shell casing converted into a bell by addition of ringer.Brass artillery shell casing converted into bell large shell casing, bell

9 x 50 cal casings only- no projectiles.Markings on clip holding the 9 casings are: 15,6,3,17,13. Assorted dates 1942 and 1943

white with silver tip shell casing cylindrical shapeinscription on outside casing: 84 MM INF ILL; [ Parachute top and six cornered star] inscription on outside casing reverse side: 4; Z 9/67; NM inscription on silver tip: hm 1-23; L77A1 7-05 10/67military, illumination round

WW1 Shell casing and projectile. The casing is made of Brass and the projectile is SteelOn the Casing 1.59 in - lot 8 - CF 1917 On projectile 58 P - 1.59 IN - RS - VSM-L10-17 Nose Cap 59No 131 R&S 1917 R L lot No 16ww1 1917 shell

Owned by Captain James Clarke, master of the Cowes to Stony Point ferry service for 28 years from 1923.Black leather bound casing and strap with extendable brass telescope painted black.Capt J Clarke (crossed out) and Arthur E Woodley in gold leaf lettering on leather casing.cowes, telescope, captain james clarke, ferry, arthur woodley, stony point

A 14 pounder shell casing manufactured for the two prototype guns used by the Victorian Navy. Unlike the later Mk I and M II 14 pounders which used separate components the ammunition for the prototype guns was assembled into one fixed piece and crimped together.Only a handfull of these sheels are known to exist as later 14 pounder guns used separate shell casing and projectiles.Cylindrical shell casing made of brass.On base - "N"nordenfelt shell case, ammunition

Hand theatre made "trench art", utilising used artillery brass shell casings, of various calibres, hand made with such "tools" as were available at the time. They have been decoratively trimmed at the mouth of each with a "scalloped" pattern, the shallowest casing mounted on small arms casings as "feet" and the large casing inverted engraved and embossed with a depiction of the Australian Commonwealth Military Forces "Rising Sun" badge.This "Dinner Gong" and "Striker" are significant Historically and Socially, as it is believed to be the only example of a dinner gong and striker made in theatre as contemporary "trench art" by serving members of this group. Around the top of the main part of the Gong are stamped the initials of the Australian members of the Royal Flying Corps at the time, it is of possible National historical significance, as they were such a small group at best, and a highly vulnerable group, quite likely to not survive the conflict. This group and their desendants went on to be a part of the formation of the Australian Flying Corps, the beginings of the Royal Australian Air Force. It relates to the embrionic stages of a part of the now Australian Defence Force.A commemorative Dinner Gong construted from Artillery Shell Casings of various sizes. The largest cut short at the bottom, mounted on rifle or machine gun casings cut short as 'feet'. A slightly smaller diameter inverted as the 'gong' with decorative engravings depicting, a Rising Sun emblem on a decorated back ground, 'AFC' (Australian Flying Corps) crowned wings, on the same decorated back ground. The open ends of these larger casings is 'scalloped' and decorated beautifully, while the closed ends have a 'pie crust effect around the flanged edge. There is a biforcated mount at the top to hold the 'striker' made from white metal ballastered rod with a wooden eliptical knob. On the top around the striker mount are stamped the initials of those believed to be the first Australian Aviators in the then AFC.

Part of the Kevin John Herdman, No. 397661, Collection. See Catalogue No. 5942P for details of his service record.Trench art based on a chrome plated shell casing. A .303 bullet is attached to each side. A Rising Sun badge and a curved 'AUSTRALIA' shoulder badge are attached to the front of the shell.Stamped on the base of the shell casing: “LOT, R, 806, (upwards arrow), N, 1943”trench art, souvenir, kevin john herdman

2 pound shell case and projectile. Brass casing with a steel projectileOn the projectile there is A P 22 3 507 On the base of the casing is 2 pd no 2 504 MF C 1942 WC On firing primmer no 12 IPG 5/41 46me 10/44ww2 shell and projectile

Brass map of Australia on top of a brass boomerang, which is attached to a brass 6 pdr. shell case on the outside circular base of the casing."AUSTRALIA" on side of casing. On shell base: 6 Pr 10 cwt 11, LOT 197, RL kn 1941 CFornaments, military history, trench art

This ash tray was given to a member of the Wodonga community by a veteran of World War 1 who served in the Royal Navy. The ashtray was made during "spare time" on board from discarded shell casings. The veteran, Howard Nation, came to Australia after the war and worked in several rural areas including Bairnsdale, Victoria. He spent time doing general farm labouring work and also occasionally worked on fishing trawlers operating out of Lakes Entrance.This ash tray represents the ingenuity of servicemen during World War 1.An ashtray made during WW1 from the discarded shell casings.war memorabilia, world war 1

The factory was located in Argyle Ave on the corner of Scotch Parade. These companies were engaged in collecting the gut of animals slaughtered at country abattoirs and using it to manufacture high quality tennis strings, sausage casings and medical sutures. Lorna , a former employee described the process. “The gut was cleaned by men in one room and then brought to a second where it was cut into ten yard lengths. Before being cut it was about thirty yards long. The length was then placed on a long nozzle and water poured into it. The gut was graded into different sizes or standards using gauges. Anything that was holey was rejected and sent to the Casing Works where it was made into tennis strings or sutures.”One black and white photo of four directors of the Country Service Casing Factory, Mr Aurish, Mr Stan Cook, Mr Northfield, Mr Brunstein. Three black and white photos of the factory buildings and surrounds of the factory.chelsea, workers, directors, pacific by products, aurish, mr northfield, mr brunstein, stan cook, argyle ave, gut factory

Part of Honeybun collection, Mitcham RSLExample of equipment from WWIWWI cigarette lighter from Messerschmit plane?LZ on end of casing