Showing 50 items matching "clock keys"
-
Ballarat Tramway MuseumFunctional object - MMTB Cincinnati "bundy" clock keys, Cincinnati Time Recorder Co. of Ohio, 1930s
... MMTB Cincinnati "bundy" clock keys...This type of clock was used by the MMTB in the 1930s. The key would be issued by the depot staff to crews for use in the clock to record times so that they could be matched up against the timetable to see whether tram or bus services were running on time. ...Key - or Bundy Clock key made for a Cincinnati Time Recording Clock comprising a circular brass section with a key number section secured by a screw at one end and a flat steel strip inserted into the brass section, with a hole at one end that could be placed on a hook. ...Functional object MMTB Cincinnati "bundy" clock keys Cincinnati Time Recorder Co. of Ohio ...Item used to operate and record the time in the Cincinnati Time Recording clock. This type of clock was used by the MMTB in the 1930s. The key would be issued by the depot staff to crews for use in the clock to record times so that they could be matched up against the timetable to see whether tram or bus services were running on time. Understood that this style of key was last used on the Port Melbourne bus route. The Museum has one of these clocks at its depot which was obtained from The Met in? The second photo shows the key in position before turning the handle around it. By the 1960's (or earlier) they were only used on the M&MTB bus routes. All the tram routes had M&MTB copies with a very different style of key. Only used on two man bus routes and the conductor held the key due to the half-cab bus design. On the tram routes the driver was responsible for the key and recording the time. The key number represented the crew's shift number. For a while towards the end of their use on the trams they were the Run number. This change led to many lost keys! See item 9568 for an example of the time recording clock itself.Demonstrates a Cincinnati "Bundy" time recording clock key.Key - or Bundy Clock key made for a Cincinnati Time Recording Clock comprising a circular brass section with a key number section secured by a screw at one end and a flat steel strip inserted into the brass section, with a hole at one end that could be placed on a hook. The steel strip is riveted into the brass round section. Two keys held.Steel section stamped "tramways" and "55" and "263"tramcars, tramways, bundy clock, cincinnati, time recorder clocks -
Queenscliffe Maritime MuseumInstrument - Barometer and Clock mounted on a timber cabinet and 10 associated items from the TSS Nairana, 1915
... .01 Barometer and Clock from Dining Saloon .02 Commemorative plaque describing the HMS Nairana's WWI service with timber mount for plaque with information sheet attached. .03 Clock Key .04 Two 2 Log books owned by Capt. ...Barometer and Clock from dining saloon, TSS Nairana 1917 - 1951 Clock Key - 4 50-No9 Hat badge - HP...JF Spence, navigation Officer and possibly later the captain who sailed with the Nairana out of Plymouth after WWI. tss nairana wwi bass strait huddart parker capt. spence Barometer and Clock from dining saloon, TSS Nairana 1917 - 1951 Clock Key - 4 50-No9 Hat badge - HP .01 Barometer and Clock from Dining Saloon .02 Commemorative plaque describing the HMS Nairana's WWI service with timber mount for plaque with information sheet attached. .03 Clock Key .04 Two 2 Log books owned by Capt. ...Bass Strait passenger ship Nairana. Built for Bass Strait ferry operator Huddart Parker & Co. Ltd. of Melbourne during World War One, the Nairana was requisitioned by the Royal Navy and completed as a seaplane carrier, HMS Nairana. Serving from 1917 to 1920 participating in the capture of Archangel during the Bolshevik Revolution. After 1920 she was decommissioned as a seaplane carrier and returned to her Australian owners crossing Bass Strait until she was laid up in 1948. Just off Port Phillip Heads on April 12 1936, a strong wave struck the Nairana, tipping her over for two minutes before she righted herself again. During the horrifying two minutes, four people were drowned, and eight people were injured. The ship was reportedly carrying roughly one tonne of concrete in the hull when she tipped. Reports from the local papers said that it was a tidal wave meanwhile others were saying it was either an earthquake or a total lie. A later paper said that the ship had been caught in a rip at the mouth of the bay, causing the tragedy. The S.S Nairana, was sold for £4,000 (over $170,200 in today’s money!) in 1951 after two years of being stranded on the beach at Port Melbourne, when the moorings broke one night during a storm and drifted ashore, causing her to wreck.Items associated with the TSS/HMS Nairana in its military and civilian roles and items relating to Capt. JF Spence, navigation Officer and possibly later the captain who sailed with the Nairana out of Plymouth after WWI. .01 Barometer and Clock from Dining Saloon .02 Commemorative plaque describing the HMS Nairana's WWI service with timber mount for plaque with information sheet attached. .03 Clock Key .04 Two 2 Log books owned by Capt. Spence containing the navigation calculations for the journey from Plymouth to Melbourne. .05 Huddart Parker hat badge [Capt. JF Spence].Barometer and Clock from dining saloon, TSS Nairana 1917 - 1951 Clock Key - 4 50-No9 Hat badge - HPtss nairana, wwi, bass strait, huddart parker, capt. spence -
Mont De LanceyDomestic object - Mantel Clock
... ...clock keys...Inside the case is a Waterbury Clock Co of USA key and the internal workings are visible. ...'Duff' brand brass plaque on back of cover. The key has 'Waterbury Clock Co USA' stamped on it....It was used by Harold and Jean Parker. clocks timepieces clock components clock keys Mantel clocks 'Duff' brand brass plaque on back of cover. ...The mantel clock has a rich history that dates back to the 18th century. These smaller clocks were designed during an age when people wanted elegant timepieces that fit on mantels or shelves. Their compact size and decorative designs made them a popular choice for homes of the time. They graced the mantelpieces or tables in homes, serving as both functional timepieces and sophisticated decorations. These clocks often feature ornate wooden carvings and intricate designs, with their gentle ticking and chimes adding a cozy ambiance to living spaces. It was used by Harold and Jean Parker.An antique wooden mantel clock made in USA with an Australian made Duff brand oak case with a plain angled top with round shaped pillar styled sides. It has a white ceramic dial face with black digits and black metal hands. The dial is covered by a glass and gold trimmed covering that may be opened on the right side. Inside the case is a Waterbury Clock Co of USA key and the internal workings are visible. It is not in working order.'Duff' brand brass plaque on back of cover. The key has 'Waterbury Clock Co USA' stamped on it.clocks, timepieces, clock components, clock keys, mantel clocks -
Mont De LanceyDomestic object - Mantel Clock, 1880's - 1920's
... Clock keys...clock with a white cardboard face, black roman numerals and black metal hands. There is a brass trim around the face. The turned wooden frame at the front has has It is in working order. The very ornately white painted pattern on the glass door has a leaf and floral pattern. The door opens with a small decorative brass catch to reveal the inner workings. It has an ornate hanging brass pendulum and the internal workings are visible.There are two spirit plumb levels inside, one is aluminium metal and is attached to the wall. There is a brass key...These clocks often feature ornate wooden carvings and intricate designs, with their gentle ticking and chimes adding a cozy ambiance to living spaces. Clock keys Clock components Timepieces Clocks Mantel clocks A small vintage decoratively carved dark timber steeple mantel pendulum clock with a white cardboard face, black roman numerals and black metal hands. ...The mantel clock has a rich history that dates back to the 18th century. These smaller clocks were designed during an age when people wanted elegant timepieces that fit on mantels or shelves. Their compact size and decorative designs made them a popular choice for homes of the time. They graced the mantelpieces or tables in homes, serving as both functional timepieces and sophisticated decorations. These clocks often feature ornate wooden carvings and intricate designs, with their gentle ticking and chimes adding a cozy ambiance to living spaces.A small vintage decoratively carved dark timber steeple mantel pendulum clock with a white cardboard face, black roman numerals and black metal hands. There is a brass trim around the face. The turned wooden frame at the front has has It is in working order. The very ornately white painted pattern on the glass door has a leaf and floral pattern. The door opens with a small decorative brass catch to reveal the inner workings. It has an ornate hanging brass pendulum and the internal workings are visible.There are two spirit plumb levels inside, one is aluminium metal and is attached to the wall. There is a brass key which does not wind the mechanism. clock keys, clock components, timepieces, clocks, mantel clocks -
Glenelg Shire Council Cultural CollectionFunctional object - Clock, Pendulum, n.d
... Lockable pendulum clock with key...Glenelg Shire Council Cultural Collection History House Cliff Street Portland great-ocean-road Lockable pendulum clock with key Functional object Clock, Pendulum ...Lockable pendulum clock with key -
Melbourne Tram MuseumFunctional object - MMTB Bundy Clock key, Melbourne & Metropolitan Tramways Board (MMTB), H5, 1930s
... MMTB Bundy Clock key...Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" with a steel section that controlled the action of the recording clock and provided the means of stamping the number "H5" onto a paper tape. ...H5 Functional object MMTB Bundy Clock key Melbourne & Metropolitan Tramways Board (MMTB) ...Used from Hawthorn depot in the time recording Bundy clocks that were located around the MMTB system. Related to the driver's shift number. Used until the closure of the Hawthorn tram depot in 1965.Demonstrates a Bundy time recording clock key.Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" with a steel section that controlled the action of the recording clock and provided the means of stamping the number "H5" onto a paper tape. tramways, trams, mmtb, clocks, bundy clock, timetables, drivers, operations, hawthorn depot -
Melbourne Tram MuseumFunctional object - MMTB Bundy Clock key 172M, Melbourne & Metropolitan Tramways Board (MMTB), 1930s
... MMTB Bundy Clock key 172M...Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" on one side and "172" on the other side with a steel section that controlled the action of the recording clock and provided the means of stamping the number "172M" onto a paper tape. ...Functional object MMTB Bundy Clock key 172M Melbourne & Metropolitan Tramways Board (MMTB) ...Used from Malvern depot in the time recording Bundy clocks that were located around the MMTB system. Related to the driver's shift number. Withdrawn from use when the Automatic Vehicle Monitoring (AVM) system came into use.Demonstrates a Bundy time recording clock key.Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" on one side and "172" on the other side with a steel section that controlled the action of the recording clock and provided the means of stamping the number "172M" onto a paper tape. tramways, trams, mmtb, clocks, bundy clock, timetables, drivers, malvern depot, operations -
Melbourne Tram MuseumFunctional object - Key, Bundy Clock Key - 18A and K116, c1940?
... Bundy Clock Key - 18A and K116...Used from South Melbourne depot in the time recording Bundy clocks that were located around the MMTB system. The key number related to the driver's shift number. ....1 - Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" on one side and "18" on the other side with a steel section that controlled the action of the recording clock and provided the means of stamping the number "18A" onto a paper tape. ...Bundy Clock Key - 18A and K116 Functional object Key ...Used from South Melbourne depot in the time recording Bundy clocks that were located around the MMTB system. The key number related to the driver's shift number. The reference has details of the manufacturing of these clocks and the companies involved. .2 - as above, but for Kew Depot, No. 116. Added 28/9/2019.1 - Key - or Bundy Clock Key - brass, rounded head with drilled hole stamped "Tramways" on one side and "18" on the other side with a steel section that controlled the action of the recording clock and provided the means of stamping the number "18A" onto a paper tape. trams, tramways, clocks, bundy clock, timetables, drivers, operations, south melbourne depot, kew depot -
Glenelg Shire Council Cultural CollectionFunctional object - Key for clock, 1860
... Key for clock...Large metal key for clock. Painted black....Functional object Key for clock Frank H. Row Row, Frank H ...Portland Free Library clockLarge metal key for clock. Painted black.Back: (no inscriptions visible) -
Wodonga & District Historical Society IncDomestic object - Marble mantel clock, c1895
... The clock is representative of French mantel clocks in the late 19th and early 20th century. The key included may be a replacement key as these keys were commonly manufactured in England by "Popular Progress" whose trademark is on this key....It is a wind up clock with 2 winding points. The key included is manufactured by English clock key manufacturer "Popular Progress". ...It is a wind up clock with 2 winding points. The key included is manufactured by English clock key manufacturer "Popular Progress". ...This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr Turner was born on 6 June 1885. He completed all of his schooling at Scots Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had four daughters – Frances (Nancy), Heather, Jessie and Mary. In 1920, the family moved from Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. The clock is representative of French mantel clocks in the late 19th and early 20th century. The key included may be a replacement key as these keys were commonly manufactured in England by "Popular Progress" whose trademark is on this key.This item comes from a collection used by a prominent citizen of Wodonga. It is representative of a style of crystal ware items of the early 20th century.A French designed black and red marble or slate mantel clock. The clock face is white with black handles and Roman numerals. The number of minutes is also marked in 5 minute intervals in Arabic numerals around the outer edge of the dial. It is a wind up clock with 2 winding points. The key included is manufactured by English clock key manufacturer "Popular Progress". There is a line design etched into each of the 4 corners of the front section and the front of the base.On Key " Made in England" and the letter P inside an outline Spadehorology, french clocks, mantel clocks, domestic items -
Bendigo Historical Society Inc.Functional object - THELMA DRUMMOND COLLECTION: ANSONIA CLOCK, Late 1800s
... Wooden American Kitchen clock made by the Ansonia Clock company with acid etched glass door showing a peacock and birds, chromed disc pendulum and winding key. ...HOROLOGY Clocks ansonia Ansonia Clock Company New York USA Wooden American Kitchen clock made by the Ansonia Clock company with acid etched glass door showing a peacock and birds, chromed disc pendulum and winding key. ...The Ansonia Clock Company was founded in Connecticut in 1851 and moved to a factory in New York in 1878. It ceased operations in 2006. This clock can be dated to c. 1870's.Wooden American Kitchen clock made by the Ansonia Clock company with acid etched glass door showing a peacock and birds, chromed disc pendulum and winding key. Clock has a 30 hour movement with time and strike, partial paper label on back.Ansonia Clock Company New York USAhorology, clocks, ansonia -
Flagstaff Hill Maritime Museum and VillageDomestic object - Clock case, Late 19th to early 20th centuries
... The doors may have given access for winding the clock with a key and to set the time or perhaps an alarm or chime. ...The doors may have given access for winding the clock with a key and to set the time or perhaps an alarm or chime. ...This vintage-era clock case has a curved top and two doors, one at the side, and the other at the top. It could have had another frame for the front with a window or fitted space for the clock mechanism. The doors may have given access for winding the clock with a key and to set the time or perhaps an alarm or chime. It is possible that the arched shape was the bottom of the clock case and not the top, in which case, there would be more space for a pendulum to swing. The wooden case would amplify the sound of the tick of the clock.The wooden clock case is connected to domestic life in the late 19th and early 20th centuries when households could afford at least one clock for their furnishings.Wooden clock case with open front and arched top, which may be the bottom of the case. It has a hinged door on the side and another door on the top with a small brass knob. This case is ready to be fitted with a clock mechanism.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, clock case, clock case with two doors, pendulum clock case, vintage, horology, time keeping, clock maker, domestic clock, furnishing -
Coal Creek Community Park & MuseumCarved Timber Mantel Clock, Waterbury Clock Co
... Patented Dec 11th, 1883 11017.3 - clock winding key, silver colour Founded in 1857 in Waterbury, Connecticut, The Waterbury Clock Co. gained a reputation and patented many inventions including the first affordable mass-produced pocket watch, the Waterbury Watch. the first alarm clock with a snooze button and the first wristwatch with a luminous dial. ...Patented Dec 11th, 1883 11017.3 - clock winding key, silver colour Founded in 1857 in Waterbury, Connecticut, The Waterbury Clock Co. gained a reputation and patented many inventions including the first affordable mass-produced pocket watch, the Waterbury Watch. the first alarm clock with a snooze button and the first wristwatch with a luminous dial. ...Brown carved timber clock, c.1890s. Glass door with elaborate wheat and boarder design. Roman numeral face, swinging pendulum. 11017.1 - Pendulum Suspension Spring - wire, Hook on end, metal tab on the other 11017.2 - pendulum, silver colour, inscribed face 'fast/slow' and Waterbury Clock Co. Patented Dec 11th, 1883 11017.3 - clock winding key, silver colour Founded in 1857 in Waterbury, Connecticut, The Waterbury Clock Co. gained a reputation and patented many inventions including the first affordable mass-produced pocket watch, the Waterbury Watch. the first alarm clock with a snooze button and the first wristwatch with a luminous dial. In the 1960s, the Waterbury Clock Co. merged with the United States Time Corporation to become the Timex Corporation. 11017.2 - Fast, Slow, Patented Dec 11th 1883, Waterbury Clock Co. -
Flagstaff Hill Maritime Museum and VillageInstrument - Clock, c. 1860s
... GAUNT / MELBOURNE" is printed in black on the clock face. The winding key hole is just below the centre of the clock face. ...GAUNT / MELBOURNE" is printed in black on the clock face. The winding key hole is just below the centre of the clock face. ...The clock was either made or sold by T. Gaunt & Co. of Melbourne, a manufacturer, importer and retailer of a wide variety of goods including jewellery, clocks and watches, navigational and measuring instruments, dinnerware, glassware and ornaments. Thomas Gaunt photograph was included in an album of security identity portraits of members of the Victorian Court, Centennial International Exhibition, Melbourne, 1888. Thomas Gaunt History: Thomas Gaunt established Melbourne's leading watchmaking, optical and jewellery business during the second half of the 19th century. Gaunt arrived in Melbourne in 1852, and by 1858 had established his own business at 14 Little Bourke Street. Around 1869 he moved to new premises in Bourke Street on the corner of Royal Arcade, Gaunt's shop quickly became a Melbourne institution. Gaunt proudly advertised that he was 'The only watch manufacturer in the Australian colonies'. While many watches and clocks may have had Gaunt's name on the dial, few would have been made locally. Gaunt did make some watches for exhibitions, and perhaps a few expensive watches for wealthy individuals. Gaunt's received a telegraph signal from Melbourne Observatory each day to correct his main clock and used this signal to rate and repair ship's chronometers and good quality watches. His main horological manufacturing was directed at turret clocks for town halls, churches and post offices. These tended to be specific commissions requiring individualised design and construction. He made the clock for the Melbourne Post Office lobby, to a design by Government Astronomer Robert Ellery, and won an award at the 1880-81 Melbourne International Exhibition for his turret clock for the Emerald Hill Town Hall. He became well known for his installation of a chronograph at Flemington Racecourse in 1876, which showed the time for the race, accurate to a quarter of a second. The firm also installed the clockwork and figures for Gog and Magog in the Royal Arcade. Thomas Gaunt also developed a department that focused on scientific instrumentation, making thermometers and barometers (from imported glass tubes), telescopes, surveying instruments and microscopes. Another department specialised in electroplating for trophies, awards and silverware, and the firm manufactured large amounts of ecclesiastical gold ware and silverware, for the church including St Patrick's Cathedral. There are no records that disclose the number of employees in the firm, but it was large enough for Gaunt to hold an annual picnic for the watchmakers and apprentices at Mordialloc from 1876; two years previously they had successfully lobbied Gaunt to win the eight hour day. Gaunt's workforce was reportedly very stable, with many workers remaining in the business for 15 to 30 years. Gaunt's wife Jane died on September 1894, aged 64. They had one son and six daughters, but only three daughters survived to adulthood. Two became nuns at the Abbotsford Convent and one daughter, Cecelia Mary Gaunt (died 28 July 1941), married William Stanislaus Spillane on 22 September 1886 and had a large family. Gaunt died at his home in Coburg, Victoria, leaving an estate valued at ₤41,453. The business continued as T. Gaunt & Co. after his death. Post Office and Clock History: Warrnambool’s Post Office has been in existence since 1857, when it was originally situated on the corner of Timor and Gilles Street. In March 1864 the Warrnambool Borough Council purchased this clock from Henry Walsh Jnr. for the sum of £25, “to be put up in front of the Post Office”. Henry Walsh Jnr was the eldest son of Melbourne’s Henry Walsh, maker and retailer of clocks, watches, thermometers and jewellery. In 1854 Henry Walsh Jnr. began business in Warrnambool as a watchmaker and jeweller later becoming a Councillor with now a local street named after him. The Post Office was extensively remodelled in 1875-76. Early photographs of this building show that the clock was installed on the northern outside wall, Timor Street, under the arches and between the 2 centre windows, where it could be seen by passers-by. Although spring loaded clocks date back to the 15th century, and fob and pocket watches evolving from these date to the 17th century, personal pocket watches were only affordable to the very fortunate. Public clocks such as this Post Office clock provided opportunity for all to know the time, and for those in possession of a personal watch to check and set their own timepieces to the correct time. During post office reservations during the 1970s the clock was removed and was eventually donated to the Flagstaff Collection. The Clock’s maker Thomas Gaunt, is historically significant and was an established and well renowned scientific instrument and clock maker in Melbourne during the 1860s. He was at that time the only watchmaker in the Australian colonies. In the 1870’s and 1880’s he won many awards for his clocks and was responsible for sending time signals to other clocks in the city and rural areas, enabling many businesses and organisations to accurate set their clocks each day. Warrnambool Borough Council purchased this clock from Henry Walsh Jnr. for the sum of £25 and the clock used to stand in front of the Warrnambool post office to allow ordinary citizens to set their time pieces as they walked by. The item is not only important because it was made by a significant early colonial clock maker and retailed by a locally known clock maker and jeweler but also that it was installed in the Warrnambool Post Office a significantly historical building in it's own right. Built in 1857 and regarded as one of the oldest postal facilities in Australia, with a listing on the National Heritage Database, (ID 15656). This 1864 hall clock originates from the Warrnambool Post Office. The clock glass is hinged to the top of the clock face and has a catch at the bottom. The metal rim of the glass is painted black. The clock face is metal, painted white, with black Roman numerals and markings for minutes and five minutes. The tip of the small hour hand is shaped like a leaf. "T. GAUNT / MELBOURNE" is printed in black on the clock face. The winding key hole is just below the centre of the clock face. The key winds a fusee chain mechanism, attached to the brass mainspring barrel that powers the pendulum with an 8-day movement. The speed of the clock can be adjusted by changing the position of the weight on the pendulum, lengthening or shortening the swing; raising the pendulum shortens its swing and speeds up the clock. The metal fusee mechanism has an inscription on it. The rectangular wooden casing is with a convex curve at the bottom that has a hinged door with a swivel latch. The original stained surface has been painted over with a matte black. There are two other doors that also allow access to the clock’s workings. The case fits over the pendulum and workings at the rear and attaches to the clock by inserting four wooden pegs into holes in the sides of the case then into the back of the clock. A flat metal plate has been secured by five screws onto the top of the case and a hole has been cut into it for the purpose of hanging up the clock. There is a nail inside the case, possibly used for a place to the key."T. GAUNT MELBOURNE" is printed on the clock face. “6 1 3” embossed on the back of the fusee mechanism behind the clock. warrnambool, shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, shipwrecked artefact, clock, warrnambool post office, fusee, henry walsh jnr, thomas gaunt, t gaunt & co, post office clock -
Parks Victoria - Wilsons Promontory LightstationClock
... The brass wall clock retains its key. It was provided by the Department of Shipping and Transport in about 1900 and is original to the lightstation. ...Face of clock is covered by a hinged glass cover with a fastener. .2. key. ...Face of clock is covered by a hinged glass cover with a fastener. .2. key. Clock ...The brass wall clock retains its key. It was provided by the Department of Shipping and Transport in about 1900 and is original to the lightstation. It was mounted in the watchroom, a small extension at the front of the lighthouse (later radar station), where lightkeepers completed many of their reports and recorded radio schedules, weather observations, distress calls and other data. Good, reliable clocks were also essential for maintaining a strict roster of hours for winding the clockwork mechanism that kept the lens active. The name of the clock’s manufacturer has not been determined. More specifically it was used for logging radio schedules that were made at five minutes to midday, everyday, and for recording the times of weather observations, distress and any other calls that came in. AMSA notes that ‘Lightkeepers who used this clock were said to have polished and wound it every week while it was in use until the 1990s when its otherwise impeccable time keeping mechanisms finally became inaccurate’.The brass clock at Wilsons Promontory illustrates the importance of timekeeping in a nineteenth century lighthouse. Despite its slightly chipped face, the timepiece has first level contributory significance for its historic association with the watch room and confirmed provenance. The significance of this clock also lies with its complete provenance..1. Brass clock with a circular white face and black roman numerals. Three brackets at back to attach to wall. Face of clock is covered by a hinged glass cover with a fastener. .2. key. Roman numerals on face of main clock. "1-12" On inner dial "10-20-30-40-50-60" -
The Beechworth Burke MuseumDecorative object - Clock, New Haven Clock Company, 1881
... The 8-day clock is designed to be wound once per week with a key; the clock features instructions on the reverse side should the timing need adjustment....The 8-day clock is designed to be wound once per week with a key; the clock features instructions on the reverse side should the timing need adjustment. ...The New Haven Clock Company from Connecticut, USA, was incorporated by clockmaker Hiram Camp (1811-1893) in 1853. Camp studied clockmaking under his uncle Chauncey Jerome (1793-1868) from the age of 17. New Haven Clock Company supplied brass clock movements to Chauncey Jerome's own business, Jerome Manufacturing Company, until that company declared bankruptcy two years later. New Haven Clock Company acquired Jerome Manufacturing Company and continued to manufacture clocks for over a century. They grew to such a scale that they were outproducing all other clockmakers in the state of Connecticut. Their 'Duna' model was created circa 1881 and features a solid walnut cabinet with ornate carvings and a glass door decorated in gold, black, and red detail. The 8-day clock is designed to be wound once per week with a key; the clock features instructions on the reverse side should the timing need adjustment.This object is part of the Burke Museum Collection and represents the detailed craftmanship of one of the leading clock manufacturers of the late nineteenth and early twentieth centuries.Decoratively carved and etched wooden eight day striking mantle clock with a white face and black roman numerals.Engraving on rim above clock face: PATD FEB.11.1879 Engraving on pendulum: PAT'D MCH.1st 1881 Reverse label: 8 Day Duna / STRIKING./ New Haven Clock Co., / NEW HAVEN, CONN. / NOTICE. / If the Clock should go too fast, lower the ball ; / if too slow, raise it. The minute hand may be / moved at any time forward, but never backward / further than the figure XII. / Should the Clock strike wrong, lift the wire / under the figure VII until it strikes right. Markings on reverse: 2496 / 3526 / 4190 / 4873 / 5936 / 71078-day clock, new haven clock company, mantel clock, hiram camp -
Flagstaff Hill Maritime Museum and VillageInstrument - Clock
... clock...Old Model School...National Model & Training School...access door...winding key...clock originated from the Bank of Australasia. The label on the base matches other items from the same donor. It was spring powered by winding the key mechanism with the clock's key through the hole in the clock face. ...clock originated from the Bank of Australasia. The label on the base matches other items from the same donor. It was spring powered by winding the key mechanism with the clock's key through the hole in the clock face. ...This wall clock originated from the Bank of Australasia. The label on the base matches other items from the same donor. It was spring powered by winding the key mechanism with the clock's key through the hole in the clock face. The hinged door on the base of the clock's case allows access to the clock's working mechanism. James Murray (son of James Murray 1780-1847) was a maker of clocks and chronometers. He worked at No. 1, Royal Exchange, London and from 1861 at 107 Great Bourke Street, Melbourne. In 1854 William Kerr ordered a clock from James Murray and erected it on the Albert Street frontage of the National Model & Training School in Spring Street Melbourne. It was Melbourne's first turret clock and remained there for 80 years before it was transferred to the Public Library in Melbourne in 1934 (now Museum Victoria). The Bank of Australasia was incorporated by Royal Charter of England in March 1834. It had its Australian beginning on 14th December 1835, opening in Sydney. The Acting Superintendent of the bank at that time was David Charters McArthur. He was Superintendent from 1867-to 1876. The Melbourne branch opened on 28th August 1838 in a two-roomed brick cottage on the north side of Little Collins Street, where two huge mastiff dogs were used at night to guard the bank. The government also provided an armed military sentinel. Due to the bank's rapid growth, a new building for the Melbourne branch was opened in 1840 at 75 Collins Street West. By 1879 the bank had been upgraded to a magnificent two-storey building on the corners of Collins and Queens Streets, with the entry on Collins Street. In 1951 the Bank of Australasia amalgamated with the Union Bank to form the Australia and New Zealand Bank, now known as the ANZ. Then in 1970, the ANZ merged with both the ES&A and the London Bank of Australia to form the ANZ Banking Group Limited. The ANZ Banking Group Ltd kindly donated a variety of historic items from the Bank of Australasia. BANK of AUSTRALASIA, WARRNAMBOOL – In 1854 Warrnambool had two banks, the Union Bank and the Bank of Australasia. Later, completely different bank businesses opened; in 1867 the National Bank of Australasia, then in 1875 the Colonial Bank of Australasia. The original Warrnambool branch of the Bank of Australasia was established in July 1854, and operated from a leased cottage on Merri Street, close to Liebig Street. The bank next bought a stone building previously erected by drapers Cramond & Dickson on the corner of Timor and Gibson Streets. Samuel Hannaford was a teller and then Manager at the Warrnambool branch from 1855 to 1856 and the Warrnambool Council chose that bank for its dealings during 1856-57. In 1859 Roberts & Co. was awarded the contract to build the new Bank of Australasia branch for the sum of £3,000. The land was on a sand hill on the northeast corner of Timor and Kepler Streets and had been bought in 1855 from investor James Cust. The new building opened on May 21, 1860. The bank continued to operate there until 1951 when it merged with the Union Bank to form the ANZ Bank, which continued operating from its Liebig Street building. Warrnambool City Council purchased the former Bank of Australasia building in 1971 and renovated it, then on 3rd December 1973 it was officially opened as the Art Gallery by Cr. Harold Stephenson and Gallery Director John Welsh. The Gallery transferred to the purpose-built building in Liebig Street in 1986 and the old bank building is now the Gallery club. Staff at the Bank of Australasia in Warrnambool included the following men but others were also involved: Samuel Hannaford, Teller then Manager from 1855-1856; W H Palmer, Manager from January 1857 until November 1869 when the Teller Basil Spence was promoted to Manager; H B Chomley, Manager from April 1873 and still there in 1886; A Butt, Manager in 1895-1904; J R McCleary Accountant and Acting Manager for 12 months, until 1900; A Kirk, Manager 1904; J Moore, staff until his transfer to Bendigo in December 1908; J S Bath was Manager until 1915; C C Cox, Manager until April 1923; Richard C Stanley, Manager 1923 to April 1928. The clock has significance through its association with the Bank of Australasia. The early Australian bank was established in 1834 by Royal Charter and opened in Sydney, Australia, in Sydney in 1835. The bank had many Australian offices in November 1877, particularly on the east and south coasts. Victoria had 45 percent of all Offices. The clock is significant for its connection with the quality clockmaker James Murray, originally from Royal Exchange London with a branch that opened in Melbourne in 1861. James Murray is renown for making the first turret clock to be installed in Melbourne. The clock is locally significant for its association with the Warrnambool Bank of Australasia, which was established in 1854. It was Warrnambool Council’s first bank. The bank continued to operate until the organisation's merger in 1951 when it became the ANZ Bank Group today. The Bank was an integral part of the growth of local commerce and the community.Wall clock with a round face behind glass in a wooden case. The painted brass face has Roman numerals, two decorative hands, divisions for minutes and a keyhole. The curved base of the case has a hinged access door with a keyhole and adhesive label. The back of the clock's case has metal mounting brackets. Inscriptions on the rectangular white label. Made by James Murray, Melbourne.Face: "JAMES MURRAY / - GT. BOURKE ST. / MELBOURNE / & / ROYAL EXCHANGE / LONEON" Label: "A M / 40"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bank of australasia, boa, union bank, australia & new zealand bank, anz bank, james murray, clock, wall clock, great bourke street melbourne, royal exchange london, william kerr, turret clock, old model school, national model & training school, access door, winding key -
Warrnambool and District Historical Society Inc.Clock, Mantle Clock, Early 20th century
... The clock face has a glass front, black numbers and metal hands. There is a strip of brass around the outside of the face. There are two key...The clock face has a glass front, black numbers and metal hands. There is a strip of brass around the outside of the face. There are two key ...This is a mantel clock used probably in the dining room or lounge room of a house. It would have been a common item in a household in the 20th century and was often an heirloom passed down from grandparents. This type of clock is an attractive item and is still regarded as highly desirable today.This clock has no known local significance but is retained as an attractive and historical item and serves as an example of a high quality household object of the past. This is a black wooden clock with a rectangular base with ornamental metal corner pieces and two ornamental gilt metal patterns. The clock has an overhanging rectangular top with two gilt handles on the side. Also on the sides of the lock are two green inset faux columns with two metal ornaments in between. The brass mechanism at the back of the clock has four wheels. The clock face has a glass front, black numbers and metal hands. There is a strip of brass around the outside of the face. There are two key holes on the face. 'Sessions'warrnambool, mantel clock -
Bendigo Military MuseumDomestic object - CLOCK, WALL PENDULUM, Gilbert Clock Co, C. 1918 - 1921
... Pendulum Wall Clock, timber frame with glass front insets in door, clock face has Roman Numerals, chimes on the hour and half hour, wind up key inside. ...Around edge of clock face, "W.M.L Gilbert Clock Co Winsted Conn U.S.A" On small Plaque, "Presented by Pioneer Comforts Fund 15.11.1921" Pendulum Wall Clock, timber frame with glass front insets in door, clock face has Roman Numerals, chimes on the hour and half hour, wind up key inside. ...This clock was placed in what was called the "Writing Room" of the Soldiers Memorial Institute when it was opened in 1921. After the renovations to the SMI in 2016 - 18 the clock was placed back in the same position in what is now called "The Building and RSL History Room".Pendulum Wall Clock, timber frame with glass front insets in door, clock face has Roman Numerals, chimes on the hour and half hour, wind up key inside. A small silver plaque is on the front bottom space.On clock face under hands, "J.T. Knowlton & Co watch makers Bendigo". Around edge of clock face, "W.M.L Gilbert Clock Co Winsted Conn U.S.A" On small Plaque, "Presented by Pioneer Comforts Fund 15.11.1921"brsl, smirsl, domestic -
Bendigo Military MuseumDomestic object - CLOCK, MANTLE PIECE, Gilbert Clock Co. U.S.A, possible 1918 - 1921
... Mantle Piece Clock, timber frame, hinged glass cover over the face is missing, numbers are 1 - 12 on clock face, rear door to the mechanism, a pendulum weight is taped to the inside, no wind up key....Around clock face, "Made in Winsted Conn United States of America" Mantle Piece Clock, timber frame, hinged glass cover over the face is missing, numbers are 1 - 12 on clock face, rear door to the mechanism, a pendulum weight is taped to the inside, no wind up key. ...This clock was originally in the front Office of the Soldiers Memorial Institute Bendigo on the mantlepiece of the fireplace. Original donor or date of being placed is unknown. It was last used in 2005 by Jack Barnes OAM who wound it every day he was in the Office, he was Secretary for 43 years of the BRSL. After the renovations to the SMI in 2016 - 18 it was placed on the mantlepiece of the fireplace in what is now called "The Building and RSL History Room"Mantle Piece Clock, timber frame, hinged glass cover over the face is missing, numbers are 1 - 12 on clock face, rear door to the mechanism, a pendulum weight is taped to the inside, no wind up key.On Clock face, "Gilbert". Around clock face, "Made in Winsted Conn United States of America"brsl, smirsl, mantle -
Bendigo Military MuseumDomestic object - CLOCK, WALL, PENDULUM, Prescott & Dawe Bendigo, possibly pre war
... Pendulum wall clock timber frame with door on front, door has glass inset, each side has a glass inset, clock numbered 1 - 12, wind up key is inside, a small silver plaque is on the bottom front face....On plaque, " Presented by Mrs F Prescott in memory of F Prescott" Pendulum wall clock timber frame with door on front, door has glass inset, each side has a glass inset, clock numbered 1 - 12, wind up key is inside, a small silver plaque is on the bottom front face. ...This clock was placed originally in what was called the "Billiard Room" of the Soldiers Memorial Institute Bendigo. There is no apparent connection to the RSL or Military service of F. Prescott. Frederick Napoli Prescott was a prominent Bendigo Optician and Jeweller at the corner of Mitchell and Hargreaves Street Bendigo. He was later in partnership with Mr C.M. Dawe trading as Prescott & Dawe. Mr Prescott died in 1913. After the renovations to the SMI 2016 - 18 this clock was placed in what is now called the "Building and RSL History Room"Pendulum wall clock timber frame with door on front, door has glass inset, each side has a glass inset, clock numbered 1 - 12, wind up key is inside, a small silver plaque is on the bottom front face.On clock face, "Prescott & Dawe". On plaque, " Presented by Mrs F Prescott in memory of F Prescott"brsl, smirsl, domestic -
Emerald Museum & Nobelius Heritage ParkDomestic object - Mantle Clock
... Ansonia mantle clock with ornate oak case with metal pendulum and a brass key c1940s. Round metal face with Roman numerals. ...Nobelius & Sons 1940s Ansonia clock Below clock face: "ANSONIA CLOCK COMPANY" Ansonia mantle clock with ornate oak case with metal pendulum and a brass key c1940s. Round metal face with Roman numerals. ...This mantle clock was given to Norman Nobelius by his parents Rupert and Flo Nobelius on the occasion of his marriage to Frances Ayers in 1947 and was subsequently inherited by their daughter, Pauline. Rupert was the son of Carl Axel Nobelius, the famous Emerald horticulturalist. This clock was a gift from the son of the famous Emerald horticulturalist, Carl Axel Nobelius.Ansonia mantle clock with ornate oak case with metal pendulum and a brass key c1940s. Round metal face with Roman numerals. The clock was cleaned and the silver work on the door replaced in recent years.Below clock face: "ANSONIA CLOCK COMPANY"emerald, c. a. nobelius & sons, 1940s, ansonia clock -
Bendigo Military MuseumMemorabilia - PURSE & VARIOUS CONTENTS
... .1) Pouch, black leather containing 18 foreign coins. .2) & .3) Pair of metal cuff links. .4) Small key for winding a clock or machine. .5) Image of WWI digger fashioned from a 6d (sixpence) & brass set of bars....Refer 2325.2 for his service history. personal effects - money containers numismatics - coins - french / german costume accessories - male jewellery military history - trench art .1) Pouch, black leather containing 18 foreign coins. .2) & .3) Pair of metal cuff links. .4) Small key for winding a clock or machine. .5) Image of WWI digger fashioned from a 6d (sixpence) & brass set of bars. ...Items collected by Horace Eli Hambly No 794 AIF. Refer 2325.2 for his service history..1) Pouch, black leather containing 18 foreign coins. .2) & .3) Pair of metal cuff links. .4) Small key for winding a clock or machine. .5) Image of WWI digger fashioned from a 6d (sixpence) & brass set of bars.personal effects - money containers, numismatics - coins - french / german, costume accessories - male jewellery, military history - trench art -
Orbost & District Historical Societywall clock, c. late 19th century
... A wall clock with Roman numerals inside a dark brown wooden case. It has a brass pendulum and the key is inside the case....A wall clock with Roman numerals inside a dark brown wooden case. It has a brass pendulum and the key is inside the case. wall clock ...The clock was the original clock located over the bar in the Orbost Club Hotel. In 1884 J.A. Petterson built the first Orbost Club Hotel with the licence in the name of Thomas Maguire (his stepson). This hotel was the first in the area and cost 1,400 pounds to build (ref. In Times Gone By - Deborah Hall) and was actually built before Orbost was proclaimed a township - April 17 1885 The R A on the pendulum stands for: retard/advance. It is a common pendulum bob, used by many manufacturers, worldwide. Regulator clocks, sometimes referred to as pendulum clocks, were invented in the late 18th century in a quest for greater timekeeping accuracy. They were weight-driven devices. The pendulum on this clock appears to be German made. .The Orbost Club Hotel was the first hotel built in the Orbost district and was an important hub for the township with many whole town meetings held there.A wall clock with Roman numerals inside a dark brown wooden case. It has a brass pendulum and the key is inside the case.R A on the pendulum.wall-clock orbost-club-hotel -
Bendigo Historical Society Inc.Domestic Object - GERTRUDE PERRY COLLECTION: MANTLE CLOCK, 1941
... clock. Veneered case with chrome bezel, silvered hands and numerals. Cathedral gong, chimes once on 1/2 hour and number of hours. Complete with pendulum and key...Modified key for easy winding. Domestic Object GERTRUDE PERRY COLLECTION: MANTLE CLOCK ...Object. Mantle Clock. 1940's 8 day time and strike clock. Veneered case with chrome bezel, silvered hands and numerals. Cathedral gong, chimes once on 1/2 hour and number of hours. Complete with pendulum and key. Presentation plaque on front reads Presented to Miss Gertrude Perry, Mitchell St, Popular Girl 1941'. Modified key for easy winding.person, bendigo, mantle clock, gertrude perry collection, mantle clock, bendigo easter fair -
Flagstaff Hill Maritime Museum and VillageInstrument - Clock Parts, Bef. 01-06-1878
... They would have been mounted inside a protective case with a small door to easily access the clock face for setting the time and accessing the key's winding hole. ...They would have been mounted inside a protective case with a small door to easily access the clock face for setting the time and accessing the key's winding hole. ...The clock parts were discovered in 1980 by Julie Wilkins, a Victorian scuba diver who had already experienced more than 500 dives in Australia and overseas. She was holidaying in Peterborough, Victoria, and looking forward to discovering more about the famous Loch Ard ship, wrecked in June 1878 at Mutton Bird Island. The fast Glasgow-built clipper ship was only five years old when the tragedy occurred. There were 54 people on board the vessel and only two survived Julie's holiday photograph of Boat Bay reminds her of her most memorable dive. Submerged in the calm, flat sea, she was carefully scanning around the remains of the old wreck when, to her amazement, a gold coin and a small gold cross suddenly came up towards her. She excitedly cupped them in her hands and then stowed the treasures safely in her wetsuit and continued her dive. She soon discovered a group of brass carriage clock parts and some bottles of champagne. It was a day full of surprises. The items were easily recognisable, without any build-up of encrustations or concretion. Julie secretly enjoyed her treasures for twenty-four years then packed them up for the early morning train trip to Warrnambool. After a short walk to Flagstaff Hill Maritime Museum and Village, her photograph was taken as she handed over her precious find. She told her story to a local newspaper reporter, lunched a café in town then took the late afternoon train home. Her generous donation is now part of a vast collection of Loch Ard shipwreck artefacts, including the gold watch and the Minton Majolica model peacock. This group of brass clockwork parts is incomplete. The pieces were in the ocean for over 100 years before Julie recovered them from the Loch Ard wreck. Their size would suit the works of a carriage clock, with a mainspring and weight to power the clock movement, a pendulum to measure the clock's speed, arbours, posts, pillars and at least one other plate. They would have been mounted inside a protective case with a small door to easily access the clock face for setting the time and accessing the key's winding hole. The clock cases were usually made from decorative gilt brass with a glass front and a carrying handle. The parts include a weighted second hand with a decorative four-pronged finish at one end, a rounded weight at the other, and a hole for attaching it to the clock face. The gear teeth profiles are ‘cycloidal’, an arch shape with vertical sides, which is common for antique clocks. Modern clockworks have ‘involute’ teeth with sloping sides and a squared-off top. The brass carriage clock parts are an example of a mechanical clock produced in the 1870s. The clock's design is a part of the chain of technological improvements in methods for timekeeping. Its cycloidal gear teeth were the forerunner of the more modern involute gears. The group of clock parts includes a weighted hand or arm for signifying the seconds. This feature was uncommon in portable Victorian-era clocks. The clock parts are also significant for their association with the ill-fated sailing ship Loch Ard, wrecked in 1878. The travelling clock or officer’s clock may have been part of the cargo destined for the 1880 Melbourne Exhibition, or the personal possession of one of the people on board the vessel. Brass clockwork parts from a mechanical clock, sixteen pieces. Parts comprise a plate, large gears or wheels, small pinions or wheels with fine teeth, wheels with cogs, and a weighted second hand. The parts were from a carriage clock ca. 1878. They were recovered from the wreck of the sailing ship Loch Ard.flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, loch ard, wreck of the loch ard, 1878, mutton bird island, peterborough, scuba diver, 1980s, shipwreck artefact, relic, clock, mechanical, clock parts, time, timekeeper, horology, chronometry, cogs, time keeping device, scientific instrument, chronometer, john harrison, longitude, carriage clock, coach clock, portable clock, travelling clock, travel clock, traveller’s clock, officer’s clock, weighted second hand, victorian era, cycloidal gear teeth, brass clock, julie wilkins -
Ringwood and District Historical SocietyPhotograph, Opening of clock tower by Mayor W. Mackinlay in August 1928
... clock tower was unveiled, the acting mayoress (Mrs. Mackinlay) cutting the cord, after which the making over of the memorial to the borough council took place, the president of the local branch of the R.S.A. (Mr. J. A. Williams) stating he had pleasure in accepting the key...clock tower was unveiled, the acting mayoress (Mrs. Mackinlay) cutting the cord, after which the making over of the memorial to the borough council took place, the president of the local branch of the R.S.A. (Mr. J. A. Williams) stating he had pleasure in accepting the key ...Age (Melbourne, Vic. : 1854 - 1954), Monday 6 August 1928, page 9 ________________________________________ RINGWOOD WAR MEMORIAL CLOCK TOWER UNVEILED A CIVIC CEREMONY. The people of Ringwood have erected a beautiful stone clock tower at a cost of £1797, as a memorial to those who served in the war. The unveiling ceremony was performed by the mayor of Ringwood (Cr. W. Mackinlay) on Saturday. “Bleak conditions with showers intervening prevailed at Ringwood on Saturday afternoon, when the unveiling ceremony of the soldiers' memorial clock tower, performed by the mayor (Cr. W. Mackinlay) took place in the presence of a Iarge and representative gathering. The ceremony was solely a civic one. A majority of members of the local branch of the R.S.S.I.L.A. had wished that Sir John Monash be invited to take a prominent part in the proceedings, but the trustees elected otherwise. The Salvation Army band from Box Hill rendered suitable music, while Sergeant E. P. Taylor (37th Battalion, A.I.F) sounded the Reveille and The Last Post impressively. Among those present were Mr. Edgar, M.L.C., the vicar of Ringwood (Rev. E. E. Robinson), Rev. G. McLaren (Methodist), the memorial trustees (Cr. J. B. McAlpin, Messrs, J. W. Barrett, A. H. Locke, J. A. Williams and A. G. Ashley). The last two mentioned are president and honorary secretary respectively of the local branch of the R.S.A. Soldier delegates from Camberwell and Mitcham were also present. At the outset the mayor said a few words would not be amiss concerning why the memorial had been so long delayed in being erected. In September, 1919, a public committee was formed, with Mr. A. V. Greenwood as chairman, to consider the erection of a suitable memorial to the soldiers. Among the more important suggestions had been the building of a hall and clubrooms on land generously offered by Mr. R. W. Dawes. This project had been abandoned, also the proposed erection of a huge memorial building, at a cost of £5000, on the site of the present town hall. As two years had passed without anything of a definite nature eventuating it was decided to elect five trustees, comprising three citizens and the president and secretary of the Returned Soldiers' Association with full power to act. In all propositions the trustees had been faced with financial difficulties, but about the time of the completion of the plans of the memorial tower Ringwood became a borough, and the new council was appealed to, and provided £500 to make the erection of the memorial possible. The architect, (Mr. H. Norris) had refused to take anything beyond out-of-pocket expenses (£16), while the engineer (Mr. Lucas) had saved a goodly sum by supervising the work. The total funds at the disposal of the trustees, including the council's donation, was, in round figures £1807. The tower complete would cost £1690; honor roll, £77, and fees paid for various designs had amounted to £30. The total expenditure was £1797, leaving a credit balance of £10. Before the unveiling the mayor, in again addressing the citizens, said he deemed it a privilege to perform such a task in connection with so splendid a memorial. The citizens had erected it as an expression of heartfelt gratitude in memory, first of all, of those heroes who gave not only their services, but their lives, when the call came in the common cause of right and liberty, upon which the British Empire was built. This memorial was also the tribute of the citizens in a degree of appreciation to those men who so un-selfishly and ungrudgingly volunteered their services in the Great War. The memorial, while commemorating the glorious deeds of Australian manhood, was not intended, in any sense, as a glorification of war. The memorial would tend to bring to one's mind the blessing of peace in contrast to the curse of hostilities. They were gathered there that afternoon to do honor to all those who volunteered for service to the Great War, but they wished to assure the friends and relatives of those who paid the supreme sacrifice of their sincere sympathy and trust. If ever in the future this fair southern land of ours was threatened by an invader he felt sure that Australian manhood would not hesitate to rally to the call to duty and defend the freedom of their country. Following prayer by Rev. G. McLaren (Methodist), the memorial clock tower was unveiled, the acting mayoress (Mrs. Mackinlay) cutting the cord, after which the making over of the memorial to the borough council took place, the president of the local branch of the R.S.A. (Mr. J. A. Williams) stating he had pleasure in accepting the key on behalf of the trustees. As the council was the permanent governing body the key would be handed back to the mayor, the memorial being given into the safety and custody of the council. During the proceedings the hymns O God, Our Help in Ages Past and Lest We Forget were rendered, the choirs of various denominations joining in the singing. Benediction was pronounced by the vicar of Ringwood (Rev. E. E. Robinson).” Black and white photograph (2 copies- one original mounted on cardboard backing)Written on rear of backing of original: "Opening of clock tower by Mayor W. Mackinlay, 4.8.1928." Written on back of copy" "Mayor Mackinlay dedicating Ringwood clocktower in original position at end of Warrandyte Rd. 1928. Maroondah Hwy on right." -
Flagstaff Hill Maritime Museum and VillageKey
... Square key used to wind clocks. Has Made in England Popular Progress. ...Flagstaff Hill Maritime Museum and Village 89 Merri Street Warrnambool great-ocean-road Flagstaff Hill Warrnambool Shipwrecked-coast Flagstaff-Hill Flagstaff-Hill-Maritime-Museum Maritime-Museum Shipwreck-coast Flagstaff-Hill-Maritime-Village Square key used to wind clocks. Has Made in England Popular Progress. ...Square key used to wind clocks. Has Made in England Popular Progress. No 8 stamped on back.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and VillageKey
... Square key used to wind clocks....Flagstaff Hill Maritime Museum and Village 89 Merri Street Warrnambool great-ocean-road Flagstaff Hill Warrnambool Shipwrecked-coast Flagstaff-Hill Flagstaff-Hill-Maritime-Museum Maritime-Museum Shipwreck-coast Flagstaff-Hill-Maritime-Village Square key used to wind clocks. Key ...Square key used to wind clocks.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village -
Flagstaff Hill Maritime Museum and VillageKey
... Square key used to wind clocks. Has number 9 stamped on key...Flagstaff Hill Maritime Museum and Village 89 Merri Street Warrnambool great-ocean-road Flagstaff Hill Warrnambool Shipwrecked-coast Flagstaff-Hill Flagstaff-Hill-Maritime-Museum Maritime-Museum Shipwreck-coast Flagstaff-Hill-Maritime-Village Square key used to wind clocks. Has number 9 stamped on key Key ...Square key used to wind clocks. Has number 9 stamped on keyflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village
