Showing 40 items
matching gun club members
-
Clunes Museum
Photograph
... GUN CLUB MEMBERS...FRAMED PHOTOGRAPH OF CLUNES GUN CLUB MEMBERS WITH TROPHY...CLUNES GUN CLUB MEMBERS FRAMED PHOTOGRAPH OF CLUNES GUN ...FRAMED PHOTOGRAPH OF CLUNES GUN CLUB MEMBERS WITH TROPHY. UNDER GLASSclunes, gun club members -
Clunes Museum
Photograph - PHOTOGRAPH COLLAGE CLUNES GUN CLUB, 1903
... PHOTOGRAPH OF CLUNES GUN CLUB MEMBERS. JANUARY 1903....ONE ORIGINAL AND TWO COPIES. COLLAGE CLUNES GUN CLUB... AND TWO COPIES. COLLAGE CLUNES GUN CLUB MEMBERS. JANUARY 1903 ...PHOTOGRAPH OF CLUNES GUN CLUB MEMBERS. JANUARY 1903.ONE ORIGINAL AND TWO COPIES. COLLAGE CLUNES GUN CLUB MEMBERS. JANUARY 1903.PRESENTED AS A TOKEN OF ESTEEM TO GC SYMONS. ESQ PRESDT PHOTOS AND NAMES: J. BURNS, SEC, J WOOLGOCK, B SAMPSON, H SAMPSON, J OXLEU, JW PRESTON TRES, J GALLAWAY, M KENNEDY, WH HOFSTEEDE, J NICHOLS , G FRASER, T FAWCETT, T BURN, J FAWCETT, J GORDON, RW NICHOL, W JENKINS, T NICHOL, C FAWCETT, A KERSHAW, AJ STEVENS, IN THE MIDDLE GC SYMONSlocal history, gun club -
Stawell Historical Society Inc
Memorabilia - Badge, 1939
... White Enamelled Stawell Gun Club Members Badge 1939... grampians Badge Memorabilia White Enamelled Stawell Gun Club Members ...White Enamelled Stawell Gun Club Members Badge 1939stawell -
Phillip Island and District Historical Society Inc.
Photograph, 1913
... cowes gun club members...Photograph of the members of the Cowes Gun Club in 1913... of the members of the Cowes Gun Club in 1913 Back row: H Jenner ...One of a collection of over 400 photographs in an album commenced in 1960 and presented to the Phillip Island & Westernport Historical Society by the Shire of Phillip IslandPhotograph of the members of the Cowes Gun Club in 1913 Back row: H Jenner, A Findlay, W Jenner, L McFee, P McFee, F Jenner, W. Wilson. Front row: D McKenzie, H Gulliver, G Jenner.local history, photography, cowes gun club members, black & white photograph, cowes gun club, john jenner, bryant west -
Clunes Museum
Photograph, ROGER PURCELL, 1997
... COPY OF PHOTOGRAPH TAKEN FROM COLLAGE OF CLUNES GUN CLUB... COPY OF PHOTOGRAPH TAKEN FROM COLLAGE OF CLUNES GUN CLUB ...COPY OF PHOTOGRAPH TAKEN FROM COLLAGE OF CLUNES GUN CLUB MEMBERS. JANUARY 1903. COLLAGE REG. NO. 1001.2.3PHOTOGRAPH / COPY OF MR. B. SAMPSONlocal history, photography, photographs, gun club -
Flagstaff Hill Maritime Museum and Village
Weapon - Cannon, 1813
This 1813 cannon is classified as a carronade, having been made by the Carron Ironworks foundry in Stirling, Scotland in 1813. It is a large calibre, short range, gun mainly used on ships. The carronade model of cannon was first used when introduced into the British Royal Navy in the American War of the Revolution (1775-1883). This cannon was originally a 28pdr, 48cwt, 8ft gun. The date ‘1837’ on the barrel probably indicates the date that the Board of Ordinance accepted the change in size to a 32pdr. It may originally have been a naval gun and the conversion undertaken when it was brought ashore. It is very probably one of the 15 guns that are known to have constituted the defences of Victoria in 1860. This group of 32pdrs was the shorter model of the 4800width and 8ft length cannon and as such are different from the 32pdrs found in NSW. It was originally located on Cannon Hill in Warrnambool when it was the site of the Warrnambool Battery Western Artillery, formed in 1866. It was obsolete by the time of the 1887 fortifications, and was moved from the Warrnambool Fortifications to the Botanic Gardens in 1910, when the Fortifications were declared obsolete. HISTORIC INFORMATION ABOUT THE CANNON IN THE WARRNAMBOOL AREA In the years following the Crimean War (1854-1857J) there was a great concern in the Colony that Imperial Russia would attempt an invasion. Coastal defences in the colony of Victoria were greatly strengthened by the Government as a result. Warrnambool was originally protected by cannons at Cannon Hill, approximately 1 kilometer west of the Flagstaff Hill Fortifications. The cannons included two 1866 guns, both 80 Pound Rifled Muzzle Loaders (RML) purchased by Victoria’s Colonial Government. They were part of a shipment of 26 such guns sent from England in December 1866. They are registered as No. 23 (80cwt-2qr-0lbs) - Gun 1, and No.13 (81cwt-1qr-12lbs) - Gun 2. They were cast at the Royal Gun Factory, Woolwich Arsenal, in 1866 and have a 6.3 inch bore. Both barrels carry the Royal Cypher of Queen Victoria, Insignia of the Royal Engineers, within the Garter and Motto surmounted by the Crown, with the Royal Cypher of Queen Victoria within the Garter (letters in centre “VR”, motto “HONI SOIT QUI MAL Y PENSE”, "Shame be to him who thinks evil of it."). The guns were originally supplied with wooden carriages. (The Royal Arsenal at Woolwich, England, was established eleven years after the Restoration of King Charles II. It was the principal supplier of armaments to the British and Empire Governments. At the height of its operations during World War One the factory covered 1300 acres and employed very nearly 80,000 workers. Woolwich was the Headquarters of the Royal Artillery since the raising of that Regiment in 1716. The Arsenal was closed in the late 1960’s.) The two 80pdr cannons were transferred to the Warrnambool Garrison Artillery Battery Fortifications erected at Flagstaff Hill in 1887 as part of Victoria’s Coastal Defences. The original wooden carriages were subsequently replaced with the present iron garrison carriages in 1888. They are a “C” pivot. The ‘racers’ or curved track set into the floor of the gun emplacement (which enabled the guns to be traversed more quickly) are as specified for guns up to 10 inch, being of wrought iron 2.78 inches wide. A temporary third gun, now no longer on Flagstaff Hill’s site, was a 5 inch Rifled Breech Loading (BL) Armstrong gun mounted on an Elswick hydro pneumatic disappearing carriage It was faster to load and fire than the 80 pound RMLs and its arrival spelt the end of the older 80 pound guns’ useful life, apart from being used for practice sessions. The 5 inch BL gun was the main defensive weapon of the Warrnambool Battery until the Battery was downgraded in importance and the gun was recalled to Melbourne in 1910. The gun emplacement still remains in place set between the 2 80pdr cannon. The State of Victoria took over the ownership of the guns at the time of Australian Federation in 1901. In about 1901/1902 the Garrison Battery was converted to the Warrnambool Battery of the Australian Field Artillery (No 4 Field Battery). It was equipped with 4.7 inch naval guns mounted on field carriages. They were now a mobile unit but continued to use the Warrnambool Garrison area at Flagstaff Hill for practice. When the Fortifications were declared obsolete the two 80 Pounder RML were relocated to Cannon Hill in 1910. On the outbreak of World War 1 the 4.7 inch guns were recalled to Melbourne, and the Battery was disbanded. Most of the personnel probably re-enlisted in the local 4th Australian Light Horse Regiment. The two 80 Pounder RML were moved back to the Fortifications in 1973. They were both fully restored by Army First Year Apprentices at the Ordinance Factory in Bendigo in time for the centenary year of the fortifications in 1987. The guns are capable of firing 80 pound (32.3kg) armour piercing exploding shells 3.65kms out to sea. They were original manned by volunteers before a paid Garrison was established. Now the Guns are again fired by volunteers on Special Event days. Since restoration the Gun Number 1 had been fired on a regular basis but Gun Number 2 hadn’t been fired since the mid 1990’s. In April 2015 Gun Number 2 was serviced in preparation for the firing of both cannons on the ANZAC Centenary commemorations on April 25th 2015. Other guns from the original Cannon Hill location were obsolete by the time the 1887 Warrnambool Garrison Artillery Battery was built. These guns are (1) a 32 Pounder Muzzle Loading Smooth Bore (SB) cast in 1813 at the famous Carron Foundry, number 80837 and now located in the Warrnambool Botanic Gardens. It is now mounted on a replica carriage due to the original carriage being in a fragile condition (the original carriage stored under cover at Flagstaff Hill). (2) a 68 Pounder Muzzle Loading Smooth Bore cast in 1861 at the equally august Low Moor Foundry, number 10310 and now located on the lawn area at the entrance to Flagstaff Hill Maritime Village. It is still mounted on its original wooden garrison carriage. Its wooden slide compressor mechanism is fragile and now kept in Flagstaff Hill’s storage. There are only seven 32 Pounder SB made by Carron and fifteen 68 Pounder SB made at Low Moor known to exist in the State of Victoria Plaque attached to the carriage “This replica carriage was constructed by the Warrnambool Tritan Woodworkers club in conjunction with the generosity of local businesses and the Warrnambool community. The original carriage (circa 1860) was removed for restoration and is now located at Flagstaff Hill Maritime Village. The timber used for the replica carriage is Monterey Cypress, which was an early planting in the gardens. 2010 marked the centenary of the cannon’s relocation in the Warrnambool Botanic Gardens.” (Reference; Victorian Guns and Cannons, South Western Victoria Assessment, May 2008, item W/B/01; Flagstaff Hill Maritime Village datasheets and archives). There are only seven 32 Pounder SB made by Carron known to exist in the State of Victoria and this is one of them. On a world level, this cannon represents a high level of rarity. Further, as it has been modified (bored up) it is representative of the historical process of amending artillery in order to ensure a longer usefulness of each piece despite rapidly advancing artillery technology. The number of surviving carriages with traversing slides in this group in South Western Victoria is unique in Australia and probably in the World. Out of 10 such platforms surviving in Australia, the South Western Victorian group has half. Several survive around the world but probably not in such a large group. The wooden sliding compressor mechanism belonging to this cannon is extremely rare, and the only one in this South Western Victorian group of Guns and Cannons. As a whole, this cannon has undergone very little restoration or modification, giving it a high level of integrity. The City of Warrnambool is one of several custodians of a collection of artillery pieces of heritage significance at a state, national and international level. These pieces are directly related to the defence of south-west Victoria in the 19th century. The care and preservation come under the Heritage Act 1995. (Reference; Victorian Guns and Cannons, South Western Victoria Assessment, May 2008).Cannon, or carronade, 32pdr with wheels. Muzzle loading smooth bore (SB) cannon. Cannon has original wooden Burmese Teak carriage and slide with wrought iron fittings and iron wheels. Manufactured by Carron in Scotland, in 1813. It has been converted from a 28pdr. There is a loop for a rope on the cascabel, which was part of the original casting. Re-bored in 1837. Marks include Serial Number, Royal Cypher of King George III, broad arrow of proofing, and numbers to represent the weight. NOTE: The cannon is displayed in the Warrnambool Botanic Gardens and is mounted on a replica wooden carriage; the original wooden carriage is now stored under cover at Flagstaff Hill Maritime Village. This carriage has 4 wheels on swivel attachments and a central gear that allows the wheels to turn on rails. Pressed into left trunnion “80837 / CARRON / 1813”, cast on barrel“symbol (Royal Cypher of King George III”, “symbol (broad arrow of proofing)” and numbers “45-3-24 / 1837” . Cascable “CV” and marks with gradations from nought to three in quarters on each side, On the carriage the end of one of the main slide members carries the mark “W symbol (broad arrow) D” incised into the timber. Plaque attached to the carriage by the Warrnambool Tritan Woodworkers club, 2010, marking the centenary of the cannon’s relocation in the Warrnambool Botanic Gardens and the addition of the replica carriage. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, victoria’s coastal defences, warrnambool fortification, warrnambool garrison battery, ordinance, armaments, cannon hill fortifications, victorian colonial government, carron ironwroks foundary, 32pdr smooth bore cannon, 28pdr smooth bore cannon, 1813 cannon, carronade -
Warrnambool and District Historical Society Inc.
Trophy, Rifle Club, 1909
This shield was awarded in 1909 by the Rifle Clubs of South Western Victoria for a rifle-shooting competition. Rifle Clubs operated in Warrnambool from 1860 and possibly earlier and in 1904 a union of rifle clubs in the Warrnambool district was formed - the South Western District Rifle Clubs' Union. Edward Geary was a member of the Mounted Rifles, G Company in the 1890s and served as a sergeant in the Boer War, 1899-1900. He was commended by the founder and commandant of the Victorian Mounted Rifles, Colonel Tom Price, for his bravery in South Africa rescuing wounded soldiers under heavy fire. After the Boer War Geary continued to serve in the Mounted Rifles local unit (later called Australian Lighthorse). He was also a long-time member of the Warrnambool Rifle Club and won this trophy as a member of a Lighthorse unit. This shield is of interest as an example of the early 20th century trophies awarded by the Warrnambool district Rifle Clubs. Gun Clubs and Rifle Clubs have been existing in the Warrnambool district since the 1860s. This is a small wooden shield, lightly polished on the front surface. It has silver-coloured metal plates attached by metal pins to the front of the shield in the form of a scroll, two fern or laurel leaves, printed information and a crown with two crossed rifles. At the back is a metal clip to enable the shield to stand up. 'The Warrnambool Citizens Challenge Shield for Competition by Teams, 1909, of Rifle Clubs in the S.W. District of Victoria won by No.1 Sq. XI, A.L.H. Handicap 65, Total Score 579, Arm. Sgt. E. Geary 88'warrnambool rifle club, edward geary, south western district rifle clubs union, warrnambool history -
Eltham District Historical Society Inc
Slide - Photograph, Monument with time capsule, Eltham Community Centre, Main Road, Eltham, c.1997
The monument with time capsule was established by the Shire of Eltham Historical Society to commemorate Victoria’s 150th anniversary and mark the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. The unveiling was conducted 10 November 1985 by Cr. Mary Grant (Shire President). The monument was constructed with a concrete base and the main feature is an old tyring plate or disc. The Time Capsule Ceremony involved lowering the sealed time capsule into place, bolting down its container lid and then concreting over the lid. The capsule contains items relating to present day (1985) Eltham and its people including a video film made by Joh Ebeli and also details of families and organizations who have contributed to construction of the monument. It is to be opened in the year 2035. The Society received an excellent response from local people, firms and organizations by way of assistance with this project. Graham Beyer, who originated the project, arranged many of the donations. He and his firm, Package Handling Equipment, donated the time capsule itself and carried out fabrication of sections of the monument. The design of the monument was adapted by Graham Beyer from drawings by Joh Ebeli. Charmac Industries donated the container for the time capsule and a cast gun metal name plate for the monument. BMG Concrete donated concrete for the base which was constructed by Caridi Construction Company. Northbourne Garden Supplies donated materials for the paving around the monument. Robert Becker from Eltham Apex directed construction of the paving by Society members. Terry Hutchinson donated the use of his crane to lift the tyring disc into place. Financial contributions were also made by the Eltham Chamber of Commerce and the Rotary Club of Eltham. In 1987 in commemoration of the Society’s 20th Anniversary, Joh Ebeli suggested the commissioning of a plaque to be added which explains the functions of the various items used in the Society’s Victorian 150th Anniversary Monument and this was unveiled by its designer, Joh Ebeli, on October 10, 1987. Circa 2010-2012 the monument was damaged through vandalism. The mounts for the ring had been broken. At the time of this photo the ring had been removed by Jim Connor, President of the Eltham District Historical Society and placed in safe storage whilst arrangements were made with Neil Carter of Carter Art, Research to undertake the repairs.Colour printeltham, eltham community centre, monument, public art, time capsule, carter art, neil carter -
Eltham District Historical Society Inc
Slide - Photograph, Monument with time capsule, Eltham Community Centre, Main Road, Eltham, c.1997
The monument with time capsule was established by the Shire of Eltham Historical Society to commemorate Victoria’s 150th anniversary and mark the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. The unveiling was conducted 10 November 1985 by Cr. Mary Grant (Shire President). The monument was constructed with a concrete base and the main feature is an old tyring plate or disc. The Time Capsule Ceremony involved lowering the sealed time capsule into place, bolting down its container lid and then concreting over the lid. The capsule contains items relating to present day (1985) Eltham and its people including a video film made by Joh Ebeli and also details of families and organizations who have contributed to construction of the monument. It is to be opened in the year 2035. The Society received an excellent response from local people, firms and organizations by way of assistance with this project. Graham Beyer, who originated the project, arranged many of the donations. He and his firm, Package Handling Equipment, donated the time capsule itself and carried out fabrication of sections of the monument. The design of the monument was adapted by Graham Beyer from drawings by Joh Ebeli. Charmac Industries donated the container for the time capsule and a cast gun metal name plate for the monument. BMG Concrete donated concrete for the base which was constructed by Caridi Construction Company. Northbourne Garden Supplies donated materials for the paving around the monument. Robert Becker from Eltham Apex directed construction of the paving by Society members. Terry Hutchinson donated the use of his crane to lift the tyring disc into place. Financial contributions were also made by the Eltham Chamber of Commerce and the Rotary Club of Eltham. In 1987 in commemoration of the Society’s 20th Anniversary, Joh Ebeli suggested the commissioning of a plaque to be added which explains the functions of the various items used in the Society’s Victorian 150th Anniversary Monument and this was unveiled by its designer, Joh Ebeli, on October 10, 1987.35mm colour positive transparency Mount - Black and Whiteeltham, eltham community centre, monument, public art, time capsule -
Eltham District Historical Society Inc
Slide - Photograph, Monument with time capsule, Eltham Community Centre, Main Road, Eltham, c.Mar. 1989
The monument with time capsule was established by the Shire of Eltham Historical Society to commemorate Victoria’s 150th anniversary and mark the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. The unveiling was conducted 10 November 1985 by Cr. Mary Grant (Shire President). The monument was constructed with a concrete base and the main feature is an old tyring plate or disc. The Time Capsule Ceremony involved lowering the sealed time capsule into place, bolting down its container lid and then concreting over the lid. The capsule contains items relating to present day (1985) Eltham and its people including a video film made by Joh Ebeli and also details of families and organizations who have contributed to construction of the monument. It is to be opened in the year 2035. The Society received an excellent response from local people, firms and organizations by way of assistance with this project. Graham Beyer, who originated the project, arranged many of the donations. He and his firm, Package Handling Equipment, donated the time capsule itself and carried out fabrication of sections of the monument. The design of the monument was adapted by Graham Beyer from drawings by Joh Ebeli. Charmac Industries donated the container for the time capsule and a cast gun metal name plate for the monument. BMG Concrete donated concrete for the base which was constructed by Caridi Construction Company. Northbourne Garden Supplies donated materials for the paving around the monument. Robert Becker from Eltham Apex directed construction of the paving by Society members. Terry Hutchinson donated the use of his crane to lift the tyring disc into place. Financial contributions were also made by the Eltham Chamber of Commerce and the Rotary Club of Eltham. In 1987 in commemoration of the Society’s 20th Anniversary, Joh Ebeli suggested the commissioning of a plaque to be added which explains the functions of the various items used in the Society’s Victorian 150th Anniversary Monument and this was unveiled by its designer, Joh Ebeli, on October 10, 1987.35mm colour positive transparency (1 of 28) Mount - Kodak KodachromeProcess Date MAR 89Meltham, eltham community centre, monument, time capsule -
Eltham District Historical Society Inc
Photograph, Time Capsule Ceremony, 10 November 1985, 10/11/1985
On Sunday, 10 November 1985 a time capsule was lowered into a monument installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria’s 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society’s 20th anniversary. The main feature of this monument is a ‘tyring disc’, a blacksmith’s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden-spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red-hot iron hoop, previously forged to the correct size, was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel. [from EDHS Newsletter No. 45, November 1985:] TIME CAPSULE CEREMONY: Our 150th Anniversary Monument is now under construction in the gardens in front of the Eltham Community Centre. Further details of the project are given under a separate heading below and this item deals with the proposed ceremony. We propose to formally lower the time capsule into its container underneath the monument as part of the Eltham Community Festival. All members are invited to attend the ceremony at 2.00 p.m. on Sunday, 10th November. Come earlier with a picnic lunch if you like. Local people and firms who have contributed money or services for the monument will also be invited. As part of the Festival programme the public are welcome to attend. This is one of the most significant projects the Society has undertaken and members' participation in its finalization would be most gratifying to the organizing committee. 150TH ANNIVERSARY PROJECTS: We have concentrated our efforts on finishing the monument and time capsule project within the 150th year and have found it necessary to abandon the historical tour project. We have applied to the State 150th Committee to transfer the funds allocated for the tour to construction of the monument. The historical tour project will be continued at a later date and photos of historic houses in the area, taken by Doug Orford, will be available for use in an associated display. At the time of writing, the monument construction is on schedule for the ceremony on 10th November. The concrete base has been completed and the main feature of the monument, which is an old tyring plate or disc, will be lifted into place in the next week. The final ceremony will involve lowering the sealed time capsule into place, bolting down its container lid and then concreting over the lid. The capsule will contain mainly items relating to present day Eltham and its people and is to be opened in the year 2035, a video film made by Joh Ebeli and also details of families and organizations who have contributed to construction of the monument. It is proposed to place the items in the capsule on 5th November and any items members think could be included may be submitted up to that date. The Society has received an excellent response from local people, firms and organizations by way of assistance with this project. Graham Beyer, who originated the project, has arranged many of the donations. He and his firm, Package Handling Equipment, have donated the time capsule itself and have carried out fabrication of sections of the monument. The design of the monument was adapted by Graham Beyer from drawings by Joh Ebeli. Charmac Industries has donated the container for the time capsule and a cast gun metal name plate for the monument. BMG Concrete has donated concrete for the base which was constructed by Caridi Construction Company. Northbourne Garden Supplies has donated materials for the paving around the monument. Robert Becker from Eltham Apex directed construction of the paving by Society members. Terry Hutchinson has agreed to donate the use of his crane to lift the tyring disc into place. Financial contributions have been made by the Eltham Chamber of Commerce and the Rotary Club of Eltham. We are grateful to all who have helped, and members' support for firms who have donated their services would be an appropriate recognition. It is planned to print "Time Capsule Certificates" which can be held by organizations or passed on to descendants by individuals. The certificates will indicate an interest in the contents of the capsule when it is opened in fifty years. Certificates will be distributed to Society members and those who have contributed to the project.Nine colour photographsactivities, 1985, time capsule, eltham, eltham festival -
Eltham District Historical Society Inc
Photograph, Time Capsule Ceremony, 10 November 1985, 10/11/1985
On Sunday, 10 November 1985 a time capsule was lowered into a monument installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria’s 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society’s 20th anniversary. The main feature of this monument is a ‘tyring disc’, a blacksmith’s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden-spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red-hot iron hoop, previously forged to the correct size, was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel. [from EDHS Newsletter No. 45, November 1985:] TIME CAPSULE CEREMONY: Our 150th Anniversary Monument is now under construction in the gardens in front of the Eltham Community Centre. Further details of the project are given under a separate heading below and this item deals with the proposed ceremony. We propose to formally lower the time capsule into its container underneath the monument as part of the Eltham Community Festival. All members are invited to attend the ceremony at 2.00 p.m. on Sunday, 10th November. Come earlier with a picnic lunch if you like. Local people and firms who have contributed money or services for the monument will also be invited. As part of the Festival programme the public are welcome to attend. This is one of the most significant projects the Society has undertaken and members' participation in its finalization would be most gratifying to the organizing committee. 150TH ANNIVERSARY PROJECTS: We have concentrated our efforts on finishing the monument and time capsule project within the 150th year and have found it necessary to abandon the historical tour project. We have applied to the State 150th Committee to transfer the funds allocated for the tour to construction of the monument. The historical tour project will be continued at a later date and photos of historic houses in the area, taken by Doug Orford, will be available for use in an associated display. At the time of writing, the monument construction is on schedule for the ceremony on 10th November. The concrete base has been completed and the main feature of the monument, which is an old tyring plate or disc, will be lifted into place in the next week. The final ceremony will involve lowering the sealed time capsule into place, bolting down its container lid and then concreting over the lid. The capsule will contain mainly items relating to present day Eltham and its people and is to be opened in the year 2035, a video film made by Joh Ebeli and also details of families and organizations who have contributed to construction of the monument. It is proposed to place the items in the capsule on 5th November and any items members think could be included may be submitted up to that date. The Society has received an excellent response from local people, firms and organizations by way of assistance with this project. Graham Beyer, who originated the project, has arranged many of the donations. He and his firm, Package Handling Equipment, have donated the time capsule itself and have carried out fabrication of sections of the monument. The design of the monument was adapted by Graham Beyer from drawings by Joh Ebeli. Charmac Industries has donated the container for the time capsule and a cast gun metal name plate for the monument. BMG Concrete has donated concrete for the base which was constructed by Caridi Construction Company. Northbourne Garden Supplies has donated materials for the paving around the monument. Robert Becker from Eltham Apex directed construction of the paving by Society members. Terry Hutchinson has agreed to donate the use of his crane to lift the tyring disc into place. Financial contributions have been made by the Eltham Chamber of Commerce and the Rotary Club of Eltham. We are grateful to all who have helped, and members' support for firms who have donated their services would be an appropriate recognition. It is planned to print "Time Capsule Certificates" which can be held by organizations or passed on to descendants by individuals. The certificates will indicate an interest in the contents of the capsule when it is opened in fifty years. Certificates will be distributed to Society members and those who have contributed to the project.Two colour photographsactivities, 1985, time capsule, eltham, eltham festival -
Eltham District Historical Society Inc
Photograph, Sinking the capsule, Graham Beyer on left and Joh Ebeli, Time Capsule Ceremony, 10 November, 1985, 10/11/1985
On Sunday, 10 November 1985 a time capsule was lowered into a monument installed near the corner of Main Road and Pitt Street in Eltham, within the gardens at the front of what is now the Eltham Community and Reception Centre. This monument commemorates Victoria’s 150th anniversary and the former location of the Eltham Town Centre, which existed along this section of Main Road, then known as Maria Street. Beneath the site is a time capsule to be opened in the year 2035. A plaque was also erected at this site in October 1987 to commemorate the Shire of Eltham Historical Society’s 20th anniversary. The main feature of this monument is a ‘tyring disc’, a blacksmith’s implement that was found on this site. This consists of a large iron disc that was used as a platform for fitting iron tyres (like the one shown on top of the platform) to wooden-spoked cart wheels. The local blacksmith and wheelwright worked together to assemble the wheel, which was clamped to the platform placed close to the fire. The red-hot iron hoop, previously forged to the correct size, was lifted with tongs by the blacksmith over the outside of the rim, then hammered down amid flames from the scorching timber. The wheelwright drenched the tyre with cold water as soon as it was in position. A clamp placed on the naff (hub) and screwed down tightly kept the spokes at a constant angle as the tyre cooled. An even pressure from the contracting tyre tightened the joints at each end of the spokes and formed a vice-like grip, which would last for the life of the wheel. [from EDHS Newsletter No. 45, November 1985:] TIME CAPSULE CEREMONY: Our 150th Anniversary Monument is now under construction in the gardens in front of the Eltham Community Centre. Further details of the project are given under a separate heading below and this item deals with the proposed ceremony. We propose to formally lower the time capsule into its container underneath the monument as part of the Eltham Community Festival. All members are invited to attend the ceremony at 2.00 p.m. on Sunday, 10th November. Come earlier with a picnic lunch if you like. Local people and firms who have contributed money or services for the monument will also be invited. As part of the Festival programme the public are welcome to attend. This is one of the most significant projects the Society has undertaken and members' participation in its finalization would be most gratifying to the organizing committee. 150TH ANNIVERSARY PROJECTS: We have concentrated our efforts on finishing the monument and time capsule project within the 150th year and have found it necessary to abandon the historical tour project. We have applied to the State 150th Committee to transfer the funds allocated for the tour to construction of the monument. The historical tour project will be continued at a later date and photos of historic houses in the area, taken by Doug Orford, will be available for use in an associated display. At the time of writing, the monument construction is on schedule for the ceremony on 10th November. The concrete base has been completed and the main feature of the monument, which is an old tyring plate or disc, will be lifted into place in the next week. The final ceremony will involve lowering the sealed time capsule into place, bolting down its container lid and then concreting over the lid. The capsule will contain mainly items relating to present day Eltham and its people and is to be opened in the year 2035, a video film made by Joh Ebeli and also details of families and organizations who have contributed to construction of the monument. It is proposed to place the items in the capsule on 5th November and any items members think could be included may be submitted up to that date. The Society has received an excellent response from local people, firms and organizations by way of assistance with this project. Graham Beyer, who originated the project, has arranged many of the donations. He and his firm, Package Handling Equipment, have donated the time capsule itself and have carried out fabrication of sections of the monument. The design of the monument was adapted by Graham Beyer from drawings by Joh Ebeli. Charmac Industries has donated the container for the time capsule and a cast gun metal name plate for the monument. BMG Concrete has donated concrete for the base which was constructed by Caridi Construction Company. Northbourne Garden Supplies has donated materials for the paving around the monument. Robert Becker from Eltham Apex directed construction of the paving by Society members. Terry Hutchinson has agreed to donate the use of his crane to lift the tyring disc into place. Financial contributions have been made by the Eltham Chamber of Commerce and the Rotary Club of Eltham. We are grateful to all who have helped, and members' support for firms who have donated their services would be an appropriate recognition. It is planned to print "Time Capsule Certificates" which can be held by organizations or passed on to descendants by individuals. The certificates will indicate an interest in the contents of the capsule when it is opened in fifty years. Certificates will be distributed to Society members and those who have contributed to the project.Colour photographactivities, 1985, time capsule, eltham, eltham festival -
Eltham District Historical Society Inc
Book - Minute Book, Eltham District Gun Club, 1948-1950
Minute Book for the Eltham District Gun Club from the first meeting held at the Shire Hall, 6th Sept 1948 to 9th May 1950. Those recorded present at the first meeting were: K. Maxwell, C. Norman, R. Norman, W.R. Squire, R.J. Squire, C. Bode, J. Harris, R. Staff, C. Thorne, F. Jones, W.S. Harrison, F.N. Squire and C.T. Martin. F.N. Squire was appointed President. C.T. Martin appointed Secretary. Those appointed to Committee were C.Bode, H.Correll, J. Harris, C. Thorne, F. Jones, W.R. Squire, R.J. Squire Finacial funds for the club to be raised by debentures issued to members, valued at £5 each. It was agreed that the Eltham Gun Club was to be affiliated with the Australian Clay Pigeon Trap Shooting Association J. Shallard was to be appointed club solicitor Club to be known as Eltham District Gun Club (Clay Targets) Commercial Bank of Australasia to be used for club's banking puposes Annual membership fee fixed at £5 k. maxwell, c. norman, r. norman, w. squire, r.j. squire, c. bode, j. harris, r. staff, c. thorne, w.s. harrison, f.n. squire, c.t. martin, eltham district gun club, minute book, eltham shire hall, h.correll, f. jones, w.r. squire, australian clay pigeon trap shooting association, j. shallard, eltham district gun club (clay targets), commercial bank of australasia, cba -
Clunes Museum
Book, GARRY FENTON, BUSHY'S CUTOUT, 1/11/2018
BUSHY WAS A LIFELONG MEMBER OF THE CLUNES COMMUNITY. HE WAS A "GUN" SHEARER AND RAISED A LARGE FAMILY IN CLUNES. A STAUNCH SUPPORT OF THE CLUNES FOOTBALL AND NETBALL CLUB AMONGST OTHER CLUNES COMMUNITY ORGANISATIONS. THIS BOOK WAS PRODUCED AS PART OF A FUNDRAISER FOR BUSHY TO PAY FOR TREATMENT FOR HIS MOTOR NEURONE DISEASE AND FINANCIAL SUPPORT FOR HIS FAMILY. CARADBOARD COVERED BOOK CONTAINING 28 PAGES. HISTORY OF THE LIFE OF ANTHONY JOHN (TONY) HILL. COVER OF BOOK IS BROWN WITH PHOTOS OF BUSHY ON FRONT, IN THE BACKGROUND A FLOCK OF SHEEP. NILshearer, bushy hill, clunes f&n club -
Clunes Museum
Photograph, VICTA STUDIO CLUNES
PHOTOGRAPH TAKEN IN FRONT OF SHINGLE ROOF HUT, DURING SMOKO BREAK. MEMBERS SEATED ON USED WOODEN BOXES AROUND SET TABLE - BEER BOTTLE, WINE CARAFE, TEA AND COFFEE. EMPTY WOODEN BOXES AND CHINESE CARRYING BASKET.POST CARD PHOTOGRAPH CLUNES GUN CLUB - TEA BREAK AT CLUB HOUSE.VICTA STUDIO CLUNESlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB COPY IS TAKEN FROM A COLLAGE OF CLUNES... GUN CLUB COPY IS TAKEN FROM A COLLAGE OF CLUNES GUNCLUB JAN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. A.J. STEVENS. MEMBER OF CLUNES GUN CLUB COPY IS TAKEN FROM A COLLAGE OF CLUNES GUNCLUB JAN 1903local history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... Photograph COPY OF PHOTOGRAPH OF MR. T. BURN. MEMBER OF CLUNES GUN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. T. BURN. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... GUN CLUB THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. J. BURNS. SEC. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... Photograph COPY OF PHOTOGRAPH OF MR. J. FAWCETT. MEMBER OF CLUNES GUN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. J. FAWCETT. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... Photograph COPY OF PHOTOGRAPH OF MR.C. FAWCETT. MEMBER OF CLUNES GUN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR.C. FAWCETT. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... OF CLUNES GUN CLUB THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR.T. FAWCETT.VICE PRES. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... OF CLUNES GUN CLUB THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. G. FRASER. VICE. PRES. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... GUN CLUB THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. J. GALLAWAY. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... Photograph COPY OF PHOTOGRAPH OF MR. J. GORDON. MEMBER OF CLUNES GUN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. J. GORDON. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... Photograph COPY OF PHOTOGRAPH OF MR.W. JENKINS. MEMBER OF CLUNES GUN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR.W. JENKINS. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . HE WAS A MEMBER OF CLUNES GUN CLUB... WAS A MEMBER OF CLUNES GUN CLUB THIS COPY OF PHOTOGRAPH WAS TAKEN FROM ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3THIS IS A COPY OF PHOTOGRAPH OF MR.M. KENNEDY. HE WAS A MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... OF CLUNES GUN CLUB THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. A. KERSHAW. VICE PRES. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... Photograph COPY OF PHOTOGRAPH OF MR. T.NICHOL. MEMBER OF CLUNES GUN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. T.NICHOL. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club -
Clunes Museum
Photograph, ROGER PURCELL, COPY 1997
... . MEMBER OF CLUNES GUN CLUB... Photograph COPY OF PHOTOGRAPH OF MR. R.W.NICHOL. MEMBER OF CLUNES GUN ...THIS COPY OF PHOTOGRAPH WAS TAKEN FROM COLLAGE OF CLUNES GUN CLUB. JANUARY 1903. REG. NO. OF COLLAGE 1001.1.2.3COPY OF PHOTOGRAPH OF MR. R.W.NICHOL. MEMBER OF CLUNES GUN CLUBlocal history, photography, photographs, gun club