Set of three full colour posters advising passengers to wear face masks on public transport. 1 - must wear face masks on public transport - 2022 2 - similar with all modes of transport represented - 2020 3 - face masks must cover nose and mouth - 2020 4 - must wear face masks while travelling - 2021Demonstrates the methods that Yarra Trams & PTV use to advise passengers to wear face masks on public transport.Set of four A3 size colour posters about Wearing face masks on public transportposters, tramways, passengers, covid-19, behaviour, public transport

If you can provide information on this artist or artwork please use the link below. This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007.Three dimensional sculpture of masks.art, artwork, sculpture, portraits

This mask belonged to Tina Howard, 1922-2015, Tina lived in Glasgow during WW2 and was required to carry the mask at all times.This is an original maskA gas mask in a vinyl 'V' shaped cover, On the mask VRB 4.40, mediumgas mask, tina howard, glasgow

Gas mask similar in style to 1339.1, possibly dating from the 1940s. This mask and associated case were intended for noncombatant use i.e. for use by civilians during wartime.Khaki colour gas mask constructed from cylindrical tin with open valve filter, attached to a plastic mask which attaches to the face with adjustable canvas straps. Mask includes two circular cut outs with plastic windows with valve on left hand side. Printed instructions on canister. “MED ADULT” embossed on top centre of the mask component. On interior of mask, “US MI/LOT/7 3SC.”gas mask, equipment, civilian, gas warfare, second world war, world war two, world war ii, mustard gas, chemical warfare

Four uniformed Australian soldiers pose for a photograph during World War One. The two seated soldiers wear gas masks. Standing left to right: Gordon Spittle, Harry Holmes Sitting: Jack Nase, Joe FawcettVerso: Snap taken in our fighting headgear. We always were (sic) the iron helmets when near the trenches, and the front helmets are gas helmets.chatham family archive, chatham, holmes, world war, world war 1, world war i, world war one, france

The Laryngeal Mask Airway was invented in 1983 by British anaesthetist, Archie Brain.Yellow plastic tubing with a pink rubber laryngeal mask attached. There is an additional fine yellow tube threaded through the base of the rubber mask. Printed in black in along side: #4 LARYNGEAL MASK AUTOCLAVABLE INTAVENT 3:1laryngeal, brain, archie, endotracheal intubation, autoclavable

The outbreak of Coronavirus COVID-19 in Melbourne in 2020 resulted in changed behaviours by the population. These changes included, at least in Kew, the placing of teddy bears in windows. In the final months of 2020, an easing of restrictions allowed members of the Kew Historical Society to meet face-to-face, including during the annual Christmas Dinner, on this occasion at the Greenacres Golf Club. At the event a decorated mask competition was held. Individual masks were donated by a number of attendees for the collection.A series of hand-made and adapted commercial masks worn during the COVID-19 pandemic in Melbourne at the annual Xmas Party of the Kew Historical Society. Attendees were advised that an award would be made to the creator/wearer of the best decorated mask. This was won by Jan Walker the owner of the pink patterned fabric beaded mask. The makers of each mask is identified in the Media Reuse credit underneath the image.masks, covid-19, kew historical society -- celebrations

H. Bellamy Gardner, an anaesthetist at the Charing Cross Hospital, was the first to use open ether in England and was responsible for popularizing the technique. Bellamy Gardner's mask consists of a wire frame which was covered with layers of gauze. He recommended constructing a face-pad consisting of several layers of gauze which were rolled together and tied to make an oval. This was applied to the face and the mask rested on the top. Ether was then administered directly on to the mask.Oval chrome-plated steel wire frame designed to fit around a face. The wire-framed dome has both vertical and horizontal wire components to sit over a patient's nose and mouth. Ether was applied to a gauze pad which was held securely in place by a hinged wire lid. This is a modified version of Bellamy Gardner's original mask.Etched on clasp: BELLAMY / GARDNER'S / ETHER MASKether, gauze

A general civilian Gas Mask for protection against gas warfare agents, tear gas, mustard gas etc..1) Face gas mask, enclosed with clear plastic eye pieces, attached cylindrical gas filter canister, head straps. .2) Protective cover, shaped canvas bag with webbing carry strap with adjustment buckle. .3) Small instruction booklet, 16 pages..1) Warning and instructions information printed on cylinder. .2) On bag, “U.S Non Combatant Gas mask M1A2-1-1” .3) On front cover, “Your Gas Mask”gas masks, civilian, u.s

This mask was obtained by Charles Quon, probably from Hong Kong, and used by the Young Chinese League in their processions.This mask is significant for its links to the Chinese Young League. The League was formally established on 4 October 1932 to to promote free social intercourse and goodwill among its members and their mutual improvement. Membership was open to all persons, with one or both parents or grandparents born in China. Wives of Chinese members were permitted as members with the same privileges. It was a significant social organisation for Chinese-Australians in Melbourne in the mid to late twentieth century.A costume mask of a male character. He has a silver headdress with pink, green and yellow decorations. He has black horns, a black face with pink cheeks, red lips and markings on his forehead, nose and chin. The eyes has been cut out for the wearer to see out of. There is a strap that runs behinds the mask.young chinese league, melbourne, victoria, australia, processions, masks

Hardcover book with a blue fabric cover. Black printed text and a silhouette of a man and a dog. 311 pages.fictionsydney horler, short stories, fiction

Item re Frederick Gardner DAVEY DFC No 410533 RAAF. Refer Reg No 3536P for his service details.Gas mask with brown cloth covering & rubber face cover. 2 circular, clear, glass eye pieces with threaded mounts. Mask is secured to head with black elasticized straps. Metal breathing plate is attached to a red metal canister via a black ribbed rubber tube. Side port on LHS face mask. Port is covered with a black cap. Printed on head straps: No 4 MK(2) 6/41 PAT. Nos 296463 & 305080 Printed in black under chin & face mask: ? L(above)2 ? & Co. SMAL SPEC (?) T.MIC LOT No 198 ? 27/6/41 Stamped on top of canister: Z 21/11/41 AT Stamped on canister base: No 4A M 1941 U6 EVIequipment, gas, masks, military

This gas mask dates to 1942 in the Second World War. This mask is representative of a style of gas mask that was widely distributed during the Second World War, and can be found in other Australian collections. Rubberised face mask with two circular plastic windows with metal rim for sight by wearer. The mask is fitted by six black elastic straps with red and yellow stripes, which are attached via metal buckles at six points at the top, middle and bottom of the face. Straps converge on rubber backed fabric cross-shaped component which is stamped. Over mouth area is a filter comprised of several layers of metal sheeting with holes. At chin, a metal fitting fits into a black rubber concertina tube which fits into the top of a rounded rectangular container with ribbed edges. Both attachment points have what appears to be adhesive fabric tape wrapped around the closure, possibly to make the system air tight.On cross-shaped component, "No 410/22-12-42" Stamped on mask, "O.T.R.C/6/42", "NORMAL" Filter mask stamped with, "EBRO/1942", "No 4/G.P. 1942" Canister stamped with "WILLOW/[broad arrow]/ML42(?)3/GS174". On canister base "No4A/WILLOW/1942/257/EVI" gas mask, breathing apparatus, chemical warfare, second world war, world war ii, world war 2

Inscribed with Lot 149 Avon 642on the base of the mask, with No.4 III B7/42 Pat Nos. 296,493 & 305,080 on the mask straps.

The Bellamy Gardner mask was in use by 1905 and was the first British mask for the open administration of ether. This mask combines the features of the Bellamy Gardner mask with a tower frame designed by Ogston. The Museum's "Penn catalogue", circa 1970, describes this mask: "this followed closely upon Ferguson's lead, but has an enormous amount of "dead-space" contained within the apparatus."Open wire ether mask with inner dome (Bellamy Gardner mask) and outer wire frame tower (Ogston frame).Moulded into connector clip: BRITISH MAKEbellamy gardner, ogston, open ether administration, henry peter penn

A World War 2 issue anti gas mask complete with respirator contained in a canvas bag, also includes anti-dimming cannister The base of the mask is stamped 1942, the mask itself is dated 2-4-42gas, mask, holding, bag

This style of mask was developed in Britain and began to appear from the 1930s, though original models may have been produced in the 1920s. Various patents for this style of mask were still being filed in the 1960s, so they were used for a considerable period of time. It is possible that the original filter pads for these masks contained asbestos, as they supposedly utilised 'fire proof' materials. Asbestos was already in use in other British respirator masks at this time. Original cataloguing information believed this item to be an eye shield, but further research has indicated that this is not the case.Mask consists of a metal plate designed to cover the lower half of the face. There is a recess along the top edge of the plate designed for the nose to sit in. There is a large oblong opening with rounded corners at the centre of the mask, which is a mouth opening to assist speech and is the main air intake. There are five round holes on either side of the mask, likely included to decrease the mask's breathing resistance for the wearer. Rounded slots at each edge of the mask are threaded through with an elastic strap, used for attaching the mask to the face. This mask would have been used with a filtering pad attached, but the pad is missing.

Canvas shoulder bag used to carry rubber gas mask within. Mask used by military to prevent inhaling noxious fumesAs manufactured by GMH during world war 2Canvas bag used for carrying a gas mask. Two pocket design, two metal studs on front for sealing pockets. Gas mask contained within bag.VI GMH 1941bag, military, gas mask

The inner dome of the Ferguson's mask was covered in an ordinary vaporising surface of gauze, while the outer tower (circular ring) was enveloped in a domette bag closing at the top to exclude the air so that the ether vapor could be concentrated.Wire mask for ether inhalation. The handle for the mask is made from the same wire as the mesh and there is a circular wire ring above the mask.mask, ether, robert ferguson, inhalation, ramsay surgical limited

Gas mask contained in a canvas bag manufactured and used during the second world warBag manufactured by GMH 1942Canvas bag with webbing strap, canvas cover, with brass press studs. Inside bag gas mask with items for maintaining the mask.V11 GMH 1942military, bag, gas mask

Example of WWI German gas mask.Part of Honeybun Collection Mitcham RSLWWI gas mask (German?) Battle of Hamel 1918.NIl

This filter is part of a complete set of a German gas mask dating to the First World War. This may have been a spare filter which was attached to a mask.Khaki coloured gas mask with leather face mask component. Two metal circles border plastic lenses of goggles which in turn have wire frame behind. Gas mask twists onto filter component which is a metal cylinder shape with layers of metal mesh inside; filter is removable. Mask has canvas band on interior for sweat absorption or comfort; attached to which are six straps which converge into loop at back of head.german, germany, world war i, world war 1, first world war, the great war, chemical warfare, gas mask, gas warfare, mustard gas

Seems to be a non- collapsible mask. Otherwise is a similar, thinner variety of Murray's mask, which was used for the administration of choloroform. John Murray was born in England, 1843 and described his wire mask in 1868 as a young chloroformist at Middlesex Hospital. It was wedge-shaped and made of thick wire and designed to be folded. The removable cover was originally made of several layers of flannel. Murray’s mask became very popular, especially in Australia, and was generally used with a single layer of flannel without an aperture or opening, as is this example. John Murray was an enthusiastic and innovative physician who also had an interest in nitrous oxide anaesthesia and conducted a series of experiments with J. Burdon Sanderson on dental patients comparing nitrous oxide to pure nitrogen. His career was short-lived and he died just before his 30th birthday. (Ball, C 1995, 'Cover Note: Murray's Chloroform Mask', Anaesthesia and Intensive Care, Vol. 23, No. 2, pg. 135)Triangular shaped wire mask covered by flannel. The flannel is sewn over frame and stitched around the base and along the vertical wire. The style and shape is similar to Murray's mask, which was used for the administration of chloroform, however this variation is not collapsible like Murray's mask.dr [e.s] holloway, mask, dr j. murray, chloroform

WW2 General Service Respirator (GSR) Gas Mask WWII made in 1939 and the Canister was made 1941. Mask made of black rubber with glass eye slots with metal rims. Metal nost piece. Covered in khaki fabric. Elasticized straps to hold mask in place, with a tan circular cloth covered rubber tube that connects to the canister. Tin canister is oval shaped reinforced with ridges, red/brown in colour.Back of mask: N-4II / ML M MAY 39gas mask, equipment, gas warfare, second world war, world war two, world war ii, mustard gas, chemical warfare

The white rubber mask indicates it is a post war / cold war production.Post war production item . Commonly used as dress up or cosplay attire Gas Mask kit complete in carry canister. Includes screw on steel filter canister, cleaning rag. Mask is made from white rubber with glass eye pieces. Drager 65G

This mask would have presumably been manufactred and used as a gas mask during World War One conflicts. It is presumably British made. It could also possibly date to the World War Two era.This item is a piece of protective equipment which presumably dates to the World War One era. As a surviving artefact from the Great War, this item holds historic value.Gas mask with rubberised light brown fabric face cover, plastic goggles for seeing, straps for fastening and a nozzle to attach to a canister. The canister is now missing. The goggles have corroded steel rings around themwhich protrude sloghtly from the mask. The light brown fabric covered rubber nozzle is attached to a black metallic component, which is attached to the mask with a circle of black rubber in between the metal and the mask. There is also another short piece of rubber attached to this black metallic component which is folded and positined between the nozzle and the mask. There is an inscription On the exterior of the mask, where the nose would ordinarilly be positioned. There is also an inscription in the interior on an almost full circular piece of fabric which is stitched into the same posion. This has a circle of metal stitched beneath it, which protrudes in two sections towards the wearers face. On the ends of the protruded sections are square pads of fabric, which are presumably there to position on either side of the wearers nose. The mask has a reinforces rubberised fabric rim where it would be incontact with the face. The main rubber nozzle protrudes through the inside of the mask, forming a mouth piece. There are four black straps and one light brown colour strap stitched to the exterior rim of the mask. Two of the black straps are severed.On the exterior at the nose: 3 On the interior at the nose: 22 109gas mask, mask, world war one, first world war, world war 1, ww1, wwi, the great war

Mask used for administering ether anaesthesia. This mask also has a carbon dioxide inlet tube. Carbon dioxide was found to promote deeper breather which assisted in attaining faster anaesthesia. The mask was designed by an American anaesthetist James Tayloe Gwathmey, (1863-1944). Gwathmey invented a range of anesthesia equipment. In 1904, he introduced this mask as one part of a resuscitation apparatus. Gwathmey modified an existing mask to more closely fit the contours of the face. The holes in the rim allow for oxygen to be delivered for resuscitation or for the delivery of a combination of oxygen and anaesthetic. Wire framed mask in tear shape. There is a hinged top bracket which allows for a piece of flannel or domette to secured to the mask, onto which the ether would be administered. There is an inlet tube near the hinged bracket to allow for the administration of CO2 or oxygen and the rim is pierced with holes.james tayloe gwathmey, ether, anaesthesia, anesthesiologist, carbon dioxide, oxygen