The SECV constructed the Kiewa Hydro Electric Scheme which included the building of Rocky Valley Dam on the Bogong High Plains near Falls Creek. H.H.C. Williams, construction engineer, Kiewa wrote to the Ski Clubs at Falls Creek outlining the dangers arising with the filling of Rocky Valley Dam. He lists 5 warnings in the interest of safety.The plan and letter provide the dates for the completion of Rocky Valley dam and its effect on the people living and working in the area including miners and ski clubs. It describes some of the features of Kiewa Works Area at the time.Plan No. K 6612 of Fall Creek showing Rocky Valley Dam's shape when it is full. Letter dated 6th April 1959 from H.H.C. Williams to Ski Clubs at Falls Creek re public safety as Rocky Valley fills. Refers to roads, transmission lines, pole lines etc in the Kiewa Works Area.Written in ink at top of letter - "Secretary / Mt Beauty and District Progress Association"rocky valley dam, falls creek ski clubs, h.h.c. williams, khes 1959, safety

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. The booklet sets out in detail the proposals for the implementation of Government policy on occupational health and safety. The objective is to improve standards of health and safety in Victoria. The Government intends involving workers and employers directly in developing new standards and practices. Submissions to be forwarded to the Ministry of Employment and Training by 20 May 1983. Responses from Tom Norwood of Ballarat College of Advanced Education and Mark Hennessy from Lincoln Institute of Health Sciences indicate what is already being done in courses available at Ballarat, Lincoln and Deakin. Mark Hennessy comments that "a united approach might ensure rational decisions by government, beneficial to our mutually complimentary courses." . Booklet - outlining proposals. Nine A4 pages - typedEmblem of Ministry on cover. Signature of Jim Simmonds, Minister; Mark Hennessy, Lincoln Institute of Health Sciences; Tom Norwood, Ballarat College of Advanced Education. Letterhead Ballarat BCAE and Lincoln Instituteviosh, victorian institute of occupational safety and health, ministry of employment and training, public discussion paper, tom norwood, mark hennessy, jim simmonds, workers, employers, ballarat college of advanced education, lincoln institute of health sciences, deakin university

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. This special report was prepared by Neville Betts, Occupational Hazard Management student at Ballarat College of Advanced Education in 1980. It was to provide comment and recommendations aimed towards improving the standards of both occupational health and safety and general public safety at Sovereign Hill, Ballarat. Interviews with those at Sovereign Hill and external public officials - fire brigade, police, ambulance contributed to the report.Twenty-eight A4 pages - typed document. Photographs included showing various safety concerns. Small holes down left side from binding which has been removed.viosh, victorian institute of occupational safety and health, ballarat college of advanced education, bcae, occupational hazard management, sovereign hill, general public safety, fire brigade, police, ambulance, inspection report, neville betts, student

This sign warned people not to go near electric wires. Consequences are explained. Public Health & Safety has changed over the years as have the consequences. Historic: Used by the S.E.C. on the Kiewa Hydro Electric Scheme. White metal sign with black and red writing warning people to keep away from electrical wires.(In black unless stated differently) "State Electricity Commission / of Victoria / Danger (red) / Contact with electric wires will cause Death (last word in red) / 10 pound reward paid for information leading to / Conviction for damaging commission's property / Maximum penalty Imprisonment for / 10 years. By order L G Morrison / Secretary"state electricity commission of victoria; warning sign; public health and safety; kiewa hydro electric scheme

High pressure Johnston Tremblay HOK pump. It was invented in about 1940 by Mr. J. Tremblay, fire-chief & director of public safety for Montreal forests commission victoria (fcv), bushfire, fire pump

used as a Siren Black metal siren control made by the public safety company St Louis model no 63114 made in the USA Microphone attached to cable mad e in Korea pN 7311 Silver clip on rear

Instruction - single A4 Photocopied sheet, titled "Code of Acceptable Behaviour", signed John McMillan CEO of PTC, reminding personal of their contractual obligations regarding public safety, equipment and disciplinary action. Dated 8/1/1993. Was faxed.trams, tramways, ptc, behaviour, staff, unions, personnel

Poster published by the Department of Transport , Communication, Federal sea Safety and Surveillance CentreSafety at sea InitiativePoster depicting a reproduction of 'The Shipwreck' by JMW Turner with the heading 'Let's make the next 200 years safer' poster, public awareness, safety at sea, turner, 'the shipwreck'

Set of five items related to the Metlink's 2009 primary school program resource for public transport education. .1 - Book - A4 size, 32 pages + card cover, printed on gloss paper centre stapled titled "Metlink Adventures" outlining the program. Has table of contents. resources sheets and outlines the program of why should public transport be used and how will we get there. Included item five the CD-ROM. .2 - Cover letter from Bernie Carolan CEO of Metlink 3/3/2009 to School Principals. Has contact details. .3 - Book - 12 page, special size format, printed on gloss paper centre stapled titled "Metlink Adventures family guide" with details for parents, games, safety, hints, signage and hints. .4 - ditto, but with some different page content and illustrations. .5 - CD -ROM - containing photo sequences for activities, resource and activity sheets and photographs.trams, tramways, metlink, schools, education, safety, public transport, illustrations

This well indexed booklet was produced by the Warrnambool Standard with the assistance of the City of Warrnambool. It contains lists of local government council and councillors for the surrounding south western district. There are photographs of the Warrnambool City Council members and main officers. Information provided covers services for accommodation, animal welfare, Churches, community organisations, complaints, counselling, courts, education, employment, health, legal, material aid, public safety, recreation, recycling, community support, tourism and transport. The booklet contains advertisements for some local businesses. This service directory provides a snapshot of businesses and support services available in Warrnambool and the South Western District in 1991. It will be useful for researchers looking at this area in the late 20th century. The booklet also provides an insight into how community awareness of recycling improving our environment was undertaken in 1991.A 32 page booklet of yellow newsprint with black printing. The staples have been removed. The front cover has a green background with yellow printing on the top half. There is a black and white photograph of a man accepting bagged recycling from a woman and two children. The top left hand corner of the photograph has a small red rectangle and yellow writing. The bottom right hand corner of the front cover has a red triangle with yellow writing. The rear cover has black printing and a stylised cartoon of a man emptying a rubbish bin at the tip being tapped on the shoulder by a man holding a recycling bag.Front cover: 1991/92 South~West Information Guide The Standard Warrnambool; Keep with your telephone book for quick reference produced in conjunction with Warrnambool City Council Rear cover: Remember... If it can be recycled, It's not rubbish! Contact your local council about recycling.warrnambool city council, warrnambool service directory 1991, recycling, south western district service directory

Date made December 2000Colour photograph showing smouldering remains that had been the Club Hotel. Photograph taken from the rear. Restricted area tape barring access to the public for safety. Still standing wooden fence and low decorative bagged brick fence. Lakes Entrance Victoriahotels, disasters, fences

Framed certificate for the Accreditation of the Ballarat Tramway Museum as a Manager of Rail Infrastructure and Provider and Operator of Rolling Stock. The certificate signed by the Acting Secretary Department of Infrastructure and Alan Ross, Director of Public Transport Safety. Framed with a wooden glazed frame, with a sheet of heavy cardboard and taped in. Certificate printed on preprinted paper - Certificate No. 37. Has a hook on the top.trams, tramways, rail safety accreditation, museum, btm

Duplicated A4p 9 page document titled "Operation of Z class Trams", providing instructions for the operation of Z class trams, fault finding, running out, changing ends, brake issues, defective doors, track brake, lights, automatic points, loud speaker, Public Address, safety, hot weather, tram No. 5, Z3 tramcars, slip indication, changing destinations, overspeed and defects.trams, tramways, mmtb, z class, training, operations, instructions, faults

Poster - full colour printed on gloss paper, titled "Travel On - Take and adventure on public transport" with sub title "A Primary School public transport Safety Program". Made by Creative Country Pty Ltd in 2000 (name and date on bottom edge). showing various forms of public transport; includes trains, trams, boats, puffing billy, restaurant tram, Luna Park, paddle steamers and various features of Melbourne itself. In top right hand corner has Dept. of Infrastructure logo, Victoria the Place to Be logo. Part of Public Transport Education Program. Two copies held.trams, tramways, public transport, education, training, safety, children

Set of six colour photographs taken by Warren Doubleday on 21/11/1998 of Museum activities and works. On Kodak paper. .1 - Andrew Chlebica, Tricia Brett of Public Transport Safety Directorate, Department of Infrastructure and Greg Rodgers (BTM) in No. 1 end saloon of No. 13, following completion of Rail Safety Audit. See Audit Report BTM32T01A. .2 - Trams 13, 40 and 39 in front of depot .3 - Depot junction / Wendouree Parade looking south showing earthworks for roadworks and parking facility. .4 - Excavation by depot junction. .5 - Ditto showing broken phone cable .6 - ditto See W. Doubleday files for names of people from Dept of InfrastructureOn back of photos in ink "21/11/98"rail safety, wendouree parade, road works, btm, tram 13, tram 40, tram 39

Lifebuoy is from the ketch Reginald M, built in Port Adelaide by John Murch in 1922. Lifebuoys were part of the emergency lifesaving equipment carried on vessels in the late 19th and early 20th century. The ring was made of strips of cork wood joined together to make the ring shape then covered in canvas and sealed usually with white paint. Four evenly spaced canvas reinforcing bands would be added for strength and for a place to thread a rope or line. A lifebuoy, or life-preserver, is used as a buoyancy device often thrown to an endangered or distressed person in the water to keep them afloat while they receive help. It is usually connected by a rope to a person in a safe area such a nearby vessel or on shore. Lifebuoys is a made from a buoyant materials such as cork or foam and ae usually covered with canvas for protection and to make it easy to grip. The first use of life saving devices in recent centuries was by the Nordic people, who used light weight wood or cork blocks to keep afloat. Cork lifebuoys were used from the late 19th to early 20th century. Kapok fibre was then used as a filling for buoys but wasn’t entirely successful. Light weight balsa wood was used as a filler after WW1. In 1928 Peter Markus invented and patented the first inflatable life-preserver. By WW2 foam was combined with Kapok. Laws were passed over time that has required aeroplanes and water going-vessels to carry life-preservers on board. The Reginald M 1922- The two-masted coastal trading ketch Reginald M was built by John (Jack) Murch in Port Adelaide, South Australia, in 1922 and it was launched there in Largs Bay in the same year. It is thought that the keel was hewn from two telegraph poles - its owner was a regular visitor to salvage yards. Its cargo at times included Guano, Barley, Wool, Horses, Cattle, Timber, Explosives, Potatoes, Shell Grit and Gypsum. At one time the vessel was used as a customs boat, renamed 'HMC No. 3, Pt Adelaide'. In 1969 she was used by a mining and railway company as a barge to carry explosives. In 1972 the vessel was renamed 'T.S. Macquarie' and planned to be used for sea cadet training.; this did not eventuate. It was sold again and went to Melbourne to be used for pleasure sailing, and again sold for use as a ferry. Late in 1975 Flagstaff Hill purchased the vessel to be used as an exhibit at the Maritime Village where many visitors enjoyed being able to board and explore a real ship with a long history. Sadly, in late 2016, the decision was made to 'decommission' the vessel due to the continuing high cost of maintenance and the risk to public safety. Many of the components of the vessel are held as part of Flagstaff Hill's collection.The lifebuoy is an example of equipment carried on vessels in the late 19th and early 20th century to help preserve life. There were many lives lost in Australia’s colonial period, particularly along the coast of South West Victoria. The lifebuoy is significant for its connection with the Australian built, 1922 coastal trader, Reginald M. Lifebuoy, round , cork, filled, white canvas cover with four red tabs. Text is printed in black on quarters 1 and 3. This lifebuoy once belonged to the vessel 'Reginald M' , Pt Adelaide. "REGINALD M / Pt ADELAIDE".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lifebuoy, lifesaving, ship equipment, reginald m, life rings, safety ring, life-saving buoy, ring buoy, life preserver, personal floating device, floatation device, safety equipment, coastal trader, john murch, reg webb

.1 Full colour, A4 report printed on gloss paper, 16 pages, centre stapled titled "Public Transport community consultative Committee - First Annual Report 1993/94", reporting on the Victorian Public Transport Forum, Accessible Transport Consultative Council and the "W class tram implementation monitoring committee". Has a foreword by Alan Brown, provides membership of each Committee, meetings, Consultation, major issues, public transport safety, Upfield railway line, sponsorship of tram shelters and signage, Metcard, fares, public relations, on-train refreshment, First class fares, accessible travel, driver-only trains and trams. The W class committee look at the major issues, tram livery, advertising on the trams, deployment, storage and alternative uses for stored trams. .2 - Full colour, A4 report printed on gloss paper, 16 pages, centre stapled titled "Public Transport community consultative Committee - Annual Report 1997", reporting on the Victorian Public Transport Forum, Accessible Transport Consultative Council, City Circle tram promotion committee and public transport heritage advisory committee. Has forward from Robin Cooper, lists membership of every committee and gives detail of their work and project outcomes.trams, tramways, minister for transport, accessible transport, w class, advertisements, city circle, heritage

Series of four newspaper cuttings from The Herald Sun 7/1/1993, about the closure of rail lines, buses to replace trains, all pages headed "Transport Revolution". The front page not collected. .1 - Page 4 - "The end for two lines" and "Buses to run all night" - about the planned closure of rail lines (Williamstown and Upfield), operation of buss on nine different routes between midnight and down on Friday and Saturday nights. Also includes that airport and football bus likely to rise under Vic Govt. polices. .2 - Page 5 - "Safety at risk - Union" - ARU remarks about Safety on public transport, tram conductors (photo of Merv Peters), photo of a lone passenger on a No. 72 tram at 10.25, union .3 - page 6 - map showing planned tram route closures (82 and part of 9), and bus replacements after 8pm, with the headline ""Buses to take over from 8pm", closure of rail lines and impacts on trains and trams. .4 - page 7 - map of rail line closures and bus replacement in the evening, "nine country lines for sale", and "The long and the short of a rort" - item about restrictive work practices and awards in public transport.trams, tramways, ptc, tramways, melbourne, railways, upfield, closure, buses, unions, public transport, conductors

This compressor was part of the E.G. Ward Collection. It is connected to the diving suit and boots also in our collection. Siebe Gorman & Company Ltd was a British company that developed diving equipment and breathing equipment and worked on commercial diving and marine salvage projects. The company advertised itself as 'Submarine Engineers'. It was founded by Augustus Siebe, a German-born British engineer chiefly known for his contributions to diving equipment. Siebe Gorman traded as an engineering firm for over 180 years from 1819 to 1999. The early success of the business was due to its founder, the Prussian immigrant Christian 'Augustus' Siebe (1788-1872). For business reasons, he applied for and was granted British citizenship in 1856. He was a gifted engineer who was able to translate theoretical problems into practical, working products. During the industrial Victorian period, the business traded as 'A. Siebe' at 145 High Street Holborn London, but in 1828 new premises were acquired at 5 Denmark Street, Soho. The family firm produced a wide range of manufactured goods including paper-making machinery, measuring machinery, water-pumps, refrigeration equipment and diving apparatus. Augustus Siebe specialised in submarine engineering early on and the company gained a reputation for the manufacture of safe, reliable diving apparatus. Augustus Siebe is best remembered for the development and manufacture of the ‘closed’ Diving Dress based on the ideas of Charles and John Deane, George Edwards and Charles Pasley. Apart from some small modifications to valves and diver communications, the basic 12 bolt ‘closed’ diving dress remained relatively unchanged after the 1870s. Later company successes were also based on innovation, with new products that could be successfully developed and manufactured to high standards. This was largely attributed to the inventive nature, foresight, engineering and entrepreneurial skills of Robert Henry Davis (1870-1965). In 1882, RH Davis joined the company of 'Siebe & Gorman' as a young 11-year-old office boy and he was to remain with the company until he died in 1965. Augustus Siebe retired in 1869 and handed over the company to a new partnership of Henry H. Siebe (1830-1885) and William A. O'Gorman (1834-1904). The new firm traded as 'Siebe & Gorman' (1870-1879) from premises in and around Mason Street, Westminster Bridge Road, Lambeth, London. The two partners soon recognised the potential of R.H. Davis and in 1894, aged 24, he became General Manager of Siebe & Gorman. Davis increasingly ran the company until the surviving partner (W.A. Gorman) died in 1904. The firm was disposed of to the Vickers (armaments) family and a new company 'Siebe Gorman & Co. Ltd.' (1905-1998) was formed. Under the chairmanship of Albert Vickers, R.H. Davis was kept on as Managing Director, and the company forged ahead. However, after WW1, the Great Depression caused manufacturing output and share prices to slump. In 1924 Robert Davis made a deal with the Vickers Board and acquired control of the company through majority shares. Under his leadership, the Siebe Gorman Company flourished and within time, four of his sons also joined the firm. The company gained a worldwide reputation for the manufacture of diving apparatus, decompression and observation chambers, and safety breathing apparatus of all types for use on the land, in the air and under the sea (including mine rescue, tunneling, aircraft, diving, submarine escape and in other hazardous environments). Close research and development links with the MOD (especially the Admiralty), also provided a lucrative outlet for the company products. In 1932, Robert Davis was knighted by King George V, principally for his invention of the ‘Davis Submerged Escape Apparatus’ (D.S.E.A.). Siebe Gorman essentially remained a family firm from the beginning (under A Siebe) until it became a public company for the first time in 1952. However, following WW2, British manufacturing stagnated through stifled investment and post-war austerity, and there was little innovation. Siebe Gorman fortunes began to decline as an ageing Sir Robert Davis failed to invest, or change the company business and management practices. In 1959, Siebe Gorman was acquired by the “Fairy Group” and the ailing Sir Robert was made Life President. Consequently, nothing changed and the slow decline continued until Sir Robert's death in March 1965. Around 1960, Siebe Gorman acquired the diving apparatus manufacturer C E Heinke, and for a brief period, it manufactured some diving equipment under the combined name of Siebe Heinke. Around 1964, Mr. E. 'Barry' Stephens was appointed as the new Managing Director to modernise Siebe Gorman. Changes were made, including a move to a new factory in Wales in 1975. The new company concentrated on fire fighting breathing apparatus and escape equipment, and the move coincided with the loss of many of the older, traditional craft skills. Between 1985 and 1998, Siebe expanded through acquisitions, and several other companies were acquired. The Siebe Gorman (diving apparatus) company has therefore traded as A. Siebe (1819-1870); Siebe & Gorman (1870-1879); Siebe Gorman & Co (1880-1904); Siebe Gorman & Co. Ltd (1905-1998).The compressor is a very significant item as it gives a snapshot into marine history and the development of diving equipment generally especially that used for salvage operations before and during WW2. Siebe & Gorman the company that made the equipment was a leading inventor, developer and innovator of marine equipment with its early helmets and other items eagerly sought after today for collections around the world. The items in the Flagstaff Hill collection give us an insight as to how divers operated and the dangers they faced doing a very necessary and dangerous job during the early days of marine exploration.A single cylinder divers' pump by Siebe Gorman & Co Ltd, London, eccentric hand cranked in brass mounted mahogany case with instructions to the underside of the lid, brass covered pressure gauge and air outlet, brass makers plaque to the front, water inlet and outlet to the rear, green painted lifting rings. Machinery has some blue painted areas on the metal.Plate on the back 'WATER SUPPLY" "WATER OVERFLOW" "WATER DRAIN-IN" Pressure gauge dial "BOURDON'S PRESSURE GAUGE" STEBE GORMAN & CO. LONDON", "LBS PRESSURE" "FEET OF SALT WATER" Plate on the front " PATENT, Siebe Gorman & Co Ltd Submarine Engineers" below emblem (Lion, Crown, Horse)flagstaff hill, warrnambool, flagstaff-hill, maritime-museum, diving compressor, london, siebe gorman & co ltd, marine technology, life saving, deep sea diving, maritime museum, maritime village, manine history

This diving suit with helmet, boots and weight is part of the E.G.Ward collection, along with the diving compressor and a photograph of a diver in this equipment. Siebe Gorman & Company Ltd was a British company that developed diving equipment and breathing equipment and worked on commercial diving and marine salvage projects. The company advertised itself as 'Submarine Engineers'. It was founded by Augustus Siebe, a German-born British engineer chiefly known for his contributions to diving equipment. Siebe Gorman traded as an engineering firm for over 180 years from 1819 to 1999. The early success of the business was due to its founder, the Prussian immigrant Christian 'Augustus' Siebe (1788-1872). For business reasons, he applied for and was granted British citizenship in 1856. He was a gifted engineer who was able to translate theoretical problems into practical, working products. During the industrial Victorian period, the business traded as 'A. Siebe' at 145 High Street Holborn London, but in 1828 new premises were acquired at 5 Denmark Street, Soho. The family firm produced a wide range of manufactured goods including paper-making machinery, measuring machinery, water pumps, refrigeration equipment and diving apparatus. Augustus Siebe specialised in submarine engineering early on and the company gained a reputation for the manufacture of safe, reliable diving apparatus. Augustus Siebe is best remembered for the development and manufacture of the ‘closed’ Diving Dress based on the ideas of Charles and John Deane, George Edwards and Charles Pasley. Apart from some small modifications to valves and diver communications, the basic 12-bolt ‘closed’ diving dress remained relatively unchanged after the 1870s. Later company successes were also based on innovation, with new products that could be successfully developed and manufactured to high standards. This was largely attributed to the inventive nature, foresight, engineering and entrepreneurial skills of Robert Henry Davis (1870-1965). In 1882, RH Davis joined the company of 'Siebe & Gorman' as a young 11-year-old office boy and he was to remain with the company until he died in 1965. Augustus Siebe retired in 1869 and handed over the company to a new partnership of Henry H. Siebe (1830-1885) and William A. O'Gorman (1834-1904). The new firm traded as 'Siebe & Gorman' (1870-1879) from premises in and around Mason Street, Westminster Bridge Road, Lambeth, London. The two partners soon recognised the potential of R.H. Davis and in 1894, aged 24, he became General Manager of Siebe & Gorman. Davis increasingly ran the company until the surviving partner (W.A. Gorman) died in 1904. The firm was disposed of to the Vickers (armaments) family and a new company 'Siebe Gorman & Co. Ltd.' (1905-1998) was formed. Under the chairmanship of Albert Vickers, R.H. Davis was kept on as Managing Director, and the company forged ahead. However, after WW1, the Great Depression caused manufacturing output and share prices to slump. In 1924 Robert Davis made a deal with the Vickers Board and acquired control of the company through majority shares. Under his leadership, the Siebe Gorman Company flourished and within time, four of his sons also joined the firm. The company gained a worldwide reputation for the manufacture of diving apparatus, decompression and observation chambers, and safety breathing apparatus of all types for use on the land, in the air and under the sea (including mine rescue, tunnelling, aircraft, diving, submarine escape and in other hazardous environments). Close research and development links with the MOD (especially the Admiralty), also provided a lucrative outlet for the company products. In 1932, Robert Davis was knighted by King George V, principally for his invention of the ‘Davis Submerged Escape Apparatus’ (D.S.E.A.). Siebe Gorman essentially remained a family firm from the beginning (under A.Siebe) until it became a public company for the first time in 1952. However, following WW2, British manufacturing stagnated through stifled investment and post-war austerity, and there was little innovation. Siebe Gorman fortunes began to decline as an ageing Sir Robert Davis failed to invest, or change the company business and management practices. In 1959, Siebe Gorman was acquired by the “Fairy Group” and the ailing Sir Robert was made Life President. Consequently, nothing changed and the slow decline continued until Sir Robert's death in March 1965. Around 1960, Siebe Gorman acquired the diving apparatus manufacturer C E Heinke, and for a brief period, it manufactured some diving equipment under the combined name of Siebe Heinke. Around 1964, Mr E. 'Barry' Stephens was appointed as the new Managing Director to modernise Siebe Gorman. Changes were made, including a move to a new factory in Wales in 1975. The new company concentrated on fire-fighting breathing apparatus and escape equipment, and the move coincided with the loss of many of the older, traditional craft skills. Between 1985 and 1998, Siebe expanded through acquisitions, and several other companies were acquired. The Siebe Gorman (diving apparatus) company has therefore traded as A. Siebe (1819-1870); Siebe & Gorman (1870-1879); Siebe Gorman & Co (1880-1904); Siebe Gorman & Co. Ltd (1905-1998).The items are very significant as a snapshot into marine history and the development of diving equipment generally especially that used for salvage operations before and during WW2. The company that made the equipment was a leading inventor,developer and innovator of marine equipment with its early helmets and other items eagerly sought after today for collections around the world. The items in the Flagstaff Hill collection give us an insight as to how divers operated and the dangers they faced doing a very necessary and dangerous job.Diving suit including helmet, boots and a weight. Diving suit is made of canvas with knitted cuffs. The helmet is metal. The boots have a thick sole and thick leather upper that is held on with leather straps and buckles. The toe of the boot is heavy metal. The weight is worn next to the trunk of the diver and it has an inscription to mark the front. It is worn with straps and buckles holding it in place. Royal Navy Admiralty Pattern 6 bolt No 3 light Siebe Gorman light diving helmet circa 1960 used by the Royal Navy before and after World War 2"Siebe Gorman & Co Ltd Marine Engineers London. Patent" with "E G Ward" on front and back plate. On weight "FRONT"flagstaff hill, warrnambool, diving suit, siebe gorman and co ltd., siebe gorman and co ltd marine engineers london, marine engineers, diving helmet, diving boots, diving weight, marine diving, maritimemuseum, maritime village, maritime history, marine technology, life saving, deep sea diving

1. In 1940 Field Headquarters for the Kiewa Scheme were established at Bogong with office, workshop facilities and accommodation for workmen, staff and some families constructed. (There had been a 'tent camp' on this site in 1939 but was destroyed by bushfires) Construction of accommodation continued until 1947. A total of 40 houses plus a hostel for single staff, post office, police station, medical centre and primary school all with water and sewerage and electricity supply. The staff hostel was known as Kiewa House and is now occupied by the Education Department. Lake Guy was named after Mr. L.T. Guy who was the Resident Engineer in charge of construction work and associated activities on the Kiewa area. He held this position from 1939 to November 1946 when he was transferred to Head Office. 2. Example of the type of heavy machinery used in clearing and building of Lake Guy, Bogong Village and Clover Dam 1. The Bogong Township was developed firstly as an accommodation centre (base camp) for construction workers employed under the Kiewa Hydroelectric Scheme. At the completion of the scheme, in the 1960's, the village was opened to public/tourism use. Strict environmental control has not allowed for any extensive redevelopment in tourist accommodation and basically restricted it to the accommodation initially built for the construction workers. Lake Guy is one of the many water storage reservoirs used to supply the power stations their main power to run the huge turbines generating the final product, electricity 2. Pictorial record of the types of machinery used in the development of Bogong Village and the Hydro-electricity scheme including the Clover Dam. Note the lack of safety equipment worn by construction workers of the period. 2 black and white photographs taken at Bogong 1. Lake Guy with Bogong Village in the background 2. Workman in bulldozer clearing rocks, possibly for construction at Bogong1. Handwritten in blue ink on back of photo 'Lake Guy showing Bogong Village' 2. No markingslake guy, bogong village, secv

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. The first intake of student for The Graduate Diploma in Occupational Hazard Management was in 1979. The letters are from students wishing to attend. All letters were replied to and a detailed information pack was forwarded to those who were accepted. This pack is shown in Media or can also be seen at Item 26575 on Victorian Collections. The applications come from both male and female students for all over Australia and from many different occupations, workplaces and businesses - private and public. Letters are either typed or handwritten. Some are on letterheads related to the applicants workplace. Majority addressed to Derek Viner.Signatures of Derek Viner and applicantsviosh, victorian institute of occupational safety and health, graduate diploma in occupational hazard management, application letters, derek viner, information pack

The 24 hour public transport trial may cause security issues at small unmanned stations such as Montmorency.News clipping, black text, colour image.matthew guy, montmorency station