Distributed to Australian Nursing Federation members during bargaining for public sector nurse to patient ratios. During this period ratios were secured as part of bargaining negotiations between unions and employer groups. After decades of campaigning from the ANF, ratios were legislated for the public sector in Victoria with the passing of the Safe Patient Care (Nurse to Patient and Midwife to Patient) Bill in 2015.Circular red, white and blue plastic badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with 'nurse patient ratios: HERE TO STAY!' and the Australian Nursing Federation logo.nursing, ratios, workforce, staffing, nurses, unionism, badges, buttons, pins, campaigning, trade unions, labour history, safe patient care (nurse to patient and midwife to patient ratios) act 2015

Button worn by Australian Nursing Federation (ANF) members and staff as an ongoing campaign in the 1990s to 2000s to secure minimum nurse staffing in the public healthcare sector. 'no more than 1 to 4' denotes a ratio of one nurse to a maximum of four patients. During this period, staffing ratios were secured as part of bargaining negotiations between unions and employer groups. After decades of campaigning from the ANF/ANMF, ratios were legislated for the public sector in Victoria with the passing of the Safe Patient Care (Nurse to Patient and Midwife to Patient) Bill in 2015.Circular black and yellow badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with 'no more than 1 to 4'.nursing, nurses, ratios, workforce, staffing, badges, buttons, pins, campaigning, safe patient care (nurse to patient and midwife to patient ratios) act 2015, victoria

Sticker distributed to and used by Australian Nursing Federation (ANF) members and staff as part of a campaign to secure minimum nurse staffing in the public healthcare sector. This sticker was accompanied by a booklet 'Nursing the system back to health : Nurse patient ratios 2001', published in April 2002. The booklet describes some of the rationale for minimum staffing ratios and developments in 2000-2001 regarding campaigning for ratios, particular the landmark decision of the Australian Industrial Relations Commission in 2000 that saw the ANF securing the world's first mandated minimum nurse-to-patient ratios. After decades of campaigning from the ANF/ANMF, ratios were legislated for the public sector in Victoria with the passing of the Safe Patient Care (Nurse to Patient and Midwife to Patient) Bill in 2015. The web address on the sticker was active from 1999 to 2004, and the shortcut 'anfvic.asn.au' was active from April 2001, suggesting this sticker dates from around 2001.Rectangular yellow, blue and white bumper sticker. Badge printed with a blue and white ANF [Australian Nursing Federation] logo, the text 'Nurses Nursing the system back to health' and the (then) website of the ANF (Victorian Branch), 'www.vicnet.net.au/~anfvb/'.nursing, ratios, workforce, staffing, nurses, unionism, stickers, campaigning, trade unions, labour history, safe patient care (nurse to patient and midwife to patient ratios) act 2015, australian nursing federation, enterprise bargaining, victoria

Button distributed to and worn by Australian Nursing Federation (ANF) members and staff as part of a campaign to secure minimum nurse staffing in the public healthcare sector. This badge was accompanied by a booklet 'Nursing the system back to health : Nurse patient ratios 2001', published in April 2002. The booklet describes some of the rationale for minimum staffing ratios and developments in 2000-2001 regarding campaigning for ratios, particular the landmark decision of the Australian Industrial Relations Commission in 2000 that saw the ANF securing the world's first mandated minimum nurse-to-patient ratios. After decades of campaigning from the ANF/ANMF, ratios were legislated for the public sector in Victoria with the passing of the Safe Patient Care (Nurse to Patient and Midwife to Patient) Bill in 2015. The web address on the badge was active from 1999 to 2004, and the shortcut 'anfvic.asn.au' was active from April 2001, suggesting this badge dates from 2001.Circular yellow, blue and white badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with a blue and white ANF [Australian Nursing Federation] logo, the text 'Nurses Nursing the system back to health' and the (then) website of the ANF (Victorian Branch), 'www.vicnet.net.au/~anfvb/'.nursing, ratios, workforce, staffing, nurses, unionism, badges, buttons, pins, campaigning, trade unions, labour history, safe patient care (nurse to patient and midwife to patient ratios) act 2015, australian nursing federation, victoria, enterprise bargaining

a. Triple-valve ratio arm. Sullivan Co. Serial No. 918/1941.

This instrument would sit in a field book for the purpose of drawing maps.Clear plastic stencil - Warfighting Symbology - featuring various measurements and ratios in black including a NATO stock number.NATO stock number: 6675-66-023-8677instrument, field book, template field, stencil

Button distributed to and worn by Australian Nursing Federation (ANF) members and staff as part of a 2003-2004 campaign to secure minimum nurse staffing in the public healthcare sector. The '5-4-20' denotes a minimum of five nurses for twenty patients in a general medical or surgical ward. During this period, staffing ratios were secured as part of bargaining negotiations between unions and employer groups. After decades of campaigning from the ANF/ANMF, ratios were legislated for the public sector in Victoria with the passing of the Safe Patient Care (Nurse to Patient and Midwife to Patient) Bill in 2015. This campaign was featured in ANF Victorian Branch newsletters from late 2003 to early 2004. Entitled the '5-4-20 campaign', it was officially launched on 19 November 2003. Advertisements and shirts from the time featured the slogan, '5 nurses for 20 patients. Nothing less!' along with the ANF logo and illustrations by The Age cartoonist Ron Tandberg. The campaign was to promote the role of minimum nurse to patient ratios in ensuring patient safety and encouraging nurse recruitment and retention.Circular yellow, blue and red badge. Silver metal, plastic-coated, with safety pin fastener adhered to back. Badge printed with '5-4-20' and a blue and red triangle design.nursing, ratios, workforce, staffing, nurses, unionism, badges, buttons, pins, campaigning, trade unions, labour history, safe patient care (nurse to patient and midwife to patient ratios) act 2015, australian nursing federation, victoria, enterprise bargaining

D.C. Volt ratio box. 100 OHMS per volt. Black terminal post pane;, inside a polished box with hinged lid and leather carry handle. Serial Number: 3021scientific instrument, volt ratio box, physics, laboratory, electrical instrument, electrical engineering

Statement growing ratio of shares transferred by Mr. Longstaff in proportion to the subscription of other shareholders to the new issue of 10% preference shares. Dated 22/07/1932.hanro, clothing, share register

A ship model with ratio of 1:200 of HMAS Hobart (DDG39). The highest part is in black, main body is grey and bottom of the ship is peprika. The ship is on a white stand and kept in glassShip model, 1:200 HMAS Hobart (DDG 39) HMAS Hobart was Charles F Adams class, guided missle destroyer commissioned into the Royal Australian Navy (RAN) in 1965. In march 1967, Hobart become the first RAN combat shiip deployed to fight in the Vietnam War. This marked the start of consistent in six-month deployments to the warzone, which continued until late 1971; Hobart was redeployed in 19620 and 1970 During 1968, the destroyer was attacked by a United States Air Force aircraft, resulting in two killed and eight wounded among ship's crew. Hobart was awarded a US Navy Commendation for her 1967 service with the United States 7th Fleet.model, model - combat ship, hmas hobart

Document, W.Webb & Co., Bendigo Telephone 127 Bendigo, Golden Eagle Roller Flour, Bran and Pollard Equivalents, Table of Ratios, New and Old Standard Bags Flour, Flour Equivalents.document

Brass is an alloy made of two-thirds copper and one-third zinc, although the ratio varies.Before the advent of electricity candlesticks were a necessity in every household.A tall and thin brass candlestick on a hexagonal base.The candlestick has a decorative shape with several raised bands and engraved lines encircling the body horizontally. It has two concentric circles decorating the foot. candlestick brass victorian lighting domestic-lighting candle

A ship model with ratio of 1:75 of HMAS Sydney. The ship has lime green deck which has two helicopter standing at the front with text P214, 1 helicopter at the back and 3 boats on a side hangingShip Model, c1990s HMAS Sydney A 1:75 scale model of HMAS Sydney, a Majastic - class light aircraft carrier operated by the Royal Australian Navy (RAN) fro 1947-1958, when she was placed in reserve. The need for a sealift capability saw the ship modified for service as a fast toop transport, and re-commiessioned in 1962. In 1965, she sailed on her first voyage to Vung Tau, transporting soldires and equipment to Vietnam. Sydney made 25 voyages to Vietnam between 1965 and 1972, earning the ship nickname "Vung tau Ferry"model, model - aircraft carier, hmas sydney, ran

Used at the Ballarat School of Mines Petrology classes. Probably a second generation petrological microscope used at SMB. Earlier reference ; to " Petrological Microscope" is made in SMB 1908 - 9 calendar page 35. Reference to "Mineral Microscopy" found in calendar for 1896, page 47. Petrographic Microscope with two-lens objective turret in a timber case. The microscope black enameled frame with brass components. Housed in a polished wood case. Three additional polarizing filters in accessory drawer. "E. Leitz Wetzlar No. 139041 Made for Kilpatrick & Co Melbourne" A removable label inside storage case door, dated "I.II.1912" and stating the obtainable magnification ratios.ballarat school of mines, geology, petrography, microscope, scientific objects, scientific instruments

Report - set of 10 A4 landscape sheets stapled in the top right hand corner providing tram and bus reporting for the three months commencing Sept. 1992. 1 - service delivery by percent, buses, trams and average - vehicles crewed out of depot 2 - on time running weekdays - tram routes 3 - ditto - government bus routes 4 - complaints 5 - platform staff ratio 6 - platform staff ratio to other 7 - cost per kilometre 8 - priority absenteeism 9 - new workcare claims 10 - kilometres per accident / incident - 1991/1992trams, tramways, accidents, reports, statistics, trams, buses, ptc

Boyd discusses the role of Sydney and its Strategic Plan. He touches on floor space ratio but focuses on the goal of enticing residents to return to the inner city as the real challenge of the plan.Original manuscript of the article ‘Sydney’s Sneaky Strategic Plan’, published in The Sunday Australian, 15.8.1971.Typewritten (c copy), quarto, 11 pagesThe last page is a redraft of the third last page.sydney, strategic plan for sydney, urbanisation, decentralisation, city, suburbs, master plan, harry seidler, floor space ratio, inner city residential, robin boyd, manuscript

Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of each box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a vagina has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of each box is printed with distributor information. One box is sealed, and one box is unsealed. Unsealed box contains one IUD, sealed inside a sterile plastic pocket. Back of sterile pocket is printed with an expiration date of 06-12-1984. The IUD is in the form of a small plastic rod, or stem, with two small flexible side-arms. Each side arm has five small protrusions. A copper wire is wound around the stem. A nylon thread with two ends is attached to the bottom end of the stem. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'.intrauterine device

Multiload is an IUD, an intrauterine device used for contraception. The plastic used in this IUD is a mixture of high density polyethylene, ethylene vinyl acetate copolymer and barium sulphate in a weight ratio 44/36/20. (MIMS, October 2013)This is one of a collection of items received from the practice of Dr Lachlan Hardy-Wilson, FRCOG, Launceston, Tasmania.Two flat boxes containing Multiload CU250 intrauterine devices. Front of box carries an image of a hand holding an IUD inserter, with the Multiload IUD at the top of the inserter, above a blue background on which an image of a uterus has been superimposed. Text printed on the front of the box reads 'MULTILOAD/CU250/intra-uterine/device/Attention:/the enclosed instructions should be followed carefully before insertion of the MULTILOAD-cu250'. Manufacturer's information is printed on the bottom section of the front of the box. Back of box is printed with distributor information. One box is sealed, and the other box has been opened. Back of sealed box carries a sticker which reads 'Date of manufacture: /12-08-1984'. Opened box contains a Multiload IUD in a sealed packet, a brochure outlining the recommended procedure for insertion, a booklet outlining prescribing information, and another booklet entitled 'Everything you have to know about Multiload'. The packaging of the IUD inside the opened box is labelled with an expiry date of 16/10/1984.intrauterine device

Jan Edwards is the grandaughter of Perceval Richards, and daughter of architect Geoffrey Richards. Of the drawings Jan said mainwarring would come up to the eisel and draw in the paper, suggesting lines, emphasis, and giving educational advice by drawing on the side of the paper. Geoffrey Mainwarring taught art at the Ballarat School of Mines, and had served as an Australian War Artist.Twenty-two life drawings in pencil and charcoal drawn by Jan Edwards, with suggestions, modelling and drawing ratios drawn onto, and around the work, by tutor Geoffrey Mainwaring. One drawing, a head study, is totally by Geoffrey Mainwaring, but is not signed. (.23) is a head study produced in a few minutes Geoff Mainwaring during a class.education, janice edwards, jan edwards, life drawing, geoff mainwaring, geoffrey mainwaring, alumni, unframed

Red covered book with the title printed in black. First Edition. J.J. Gourley, Government Printer, Melbourne. 1941. Contents are: Whole Numbers, Compound Quantities, Graphs; Vulgar Fractions; Decimal Fractions; Percentage and Ratio; Arithmetic of Daily Life; Profit and Loss; Length, Area; Volume; Tables; Project and Tables. Also includes Revisions and illustrations.Wholly set up and printed in Australia. Registered buy the Postmaster-General for transmission through the post as a book. By Authority: J.J. Gourley, Government Printer, Melbourne 1941education, primary, golden square laurel st p.s., golden square laurel street p.s. collection - arithmetic for grade vii, education department victoria, j j gourley

This drill once belonged to Goodall and Sons, who were blacksmiths in Terang. The smith was called upon to do a variety of work. In the early 1900s he was often the nearest person to be able to perform an engineer’s services for many miles around. The Dawn Ball-bearing Post Drill no. 611 is described in McPherson’s Catalogue as a “drilling machine with adjustable automatic feed, with improved Dawn coupler and ball-bearing thrust’. The heavy design of the flywheel enables it to maintain momentum” and is “fitted with pulleys for belt drive if desired” The hand crank drives an automatic feed to work off a cam-follow system opposite a large wheel. Made by Dawn Manufacturing Co. Australia 1920-1950. DAWN MANUFACTURING CO. Dawn Manufacturing Co. was founded in Coburg, Melbourne, in 1917 by the four Blake brothers, who were all engineers. After World War I Dawn was supplying drills Australia wide and the company was growing at a healthy rate. During the depression they remained busy, with employees working 60-80 hour weeks. Dawn was contracted to supply vices and clamps to the Australian Defence Department and munitions factory during the World War II. In 1959 the company was taken over by G.N. Raymond Group, then in 1973 the Siddons Ramset Limited acquired Dawn. In December 1991, Dawn became a unit of the United States owned Stanley Works Pty. Ltd. In November 1998 Dawn became 100 per cent Australian owned. HENRY GOODALL & SONS Henry Goodall (1870-1936) was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The drill is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the 1920s-1950s.Dawn Ball-bearing Post Drill no. 611, made by Dawn of Melbourne, model no 611. Hand operated drill press. Self-feeding blacksmiths’ drill-press. This drill once belonged to Harry Goodall & Sons, blacksmiths of Terang. Dated 1920s-1950s. Gear ratio 2:1 main drive, 6" diam, 3:1 reduction gear. "Dawn", "Melbourne"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, terang 1900s, warrnambool district 1900s, post drill, blacksmith’s drill, dawn post drill, dawn ball-bearing post drill no. 611, blacksmiths, dawn of melbourne

Provides information on the GE 264 Ventilated Commutating Pole Motor, prepared by the MMTB dated 4/8/1922. Gives graphs for various gear ratios and wheel sizes. Would have been used for gear and wheel size selection. This type of motor was used in X 217 - see reference.Yields information about the motor used in Birney X 217Document printed on foolscap paper.tramways, technical information, tramcars, electrical equipment, motors, x class, tram 217

Document gives the data about scheduled speeds in miles per hour for General Electric GE-264 motors for stops per miles, gear ratios, and wheel sizes for form A and B motors. Has a table for truck or bogie data and weights. Enabled street car or tramway operators to select their equipment and motors. Demonstrates a GE data sheet to assist tramway engineers in their equipment selection.Data sheet typed on foolscap paper.tramways, tramcars, ge, general electric, motors, specifications

This bowl was used by the State Electricity Commission of Victoria in their mess rooms for their workers during the construction of the Kiewa Hydro Electric Scheme. The imprint of the year "1921" was to identify the year that the SECV was formed which relieved the private VHEC (Victorian Hydro-Electric Company). As the scheme was of such a huge scope, isolated and time consuming nature, the feeding of its workers was quite demanding of cutlery and crockery. The use of sturdy English cups and saucers was essential. The period of construction and the isolation of the Kiewa Valley area placed heavy demand for "solid" crockery that could wear abusive handling. This period in time was one when crockery, whether for domestic or commercial use, was imported from "mother" England. This scenario was more so for governmental bodies such as rail, jails and electricity providers than domestic users. The influx of cheaper Asian crockery had not yet begun.This type of crockery item was used by the thousands of SEC Victorian staff and construction workers involved in the building of the Kiewa Hydro Electricity Scheme, over the extensive period (1938 to 1961). This was a period when Government bodies and other semi- government organisations were still tied to the "establishments" of "mother" England. It was a period in Australia's development when the Asian influence was very weak and the established ties to England and Europe was still very strong. The majority of heavy equipment and machinery was either made in England or Europe. Local/European expertise in dam construction and water management in alpine terrain came from migrants and specialist recruited from England and Europe. The quality of workmanship from big steel manufacturing plants in England and Europe could not be matched from anywhere else in the developed world.This item is a white ceramic State Electricity Commission of Victoria bowl. It is made in England and is of strong and durable ceramic. The 5mm thickness of the ceramic suggests this bowl (cereal/soup) belongs to a commercial kitchen environment and not domestic. The indent bottom of the bowl is 5mm deep with a side curvature ratio of 2:5. The ceramic is glazed to a commercial standard (worker's mess). See also KVHS 0128 (B to D) for other ceramic crockery. The seal of the State Electricity Commission of Victoria is imprinted on the top outside rim within a curved scroll and a raised fist with electrical "charges" extending out.. Snuggled within the borders of the scroll is a banner with the five stars of the Southern Cross . On the underside "Vitrified sold by Cafe & Hotel Supplies Pty Ltd Dunn Bennett & Co. Ltd. Burslem Made in England"ceramic crockery, plate, secv, state electricity commission of victoria, crockery, mt beauty chalet, bogong mess hall

This bowl was used by the SECV in their mess rooms for workers during the construction of the Kiewa Hydro Electric Scheme. The imprint of the year '1921' was to identify the year that the SECV was formed which relieved the private VHEC (Victorian Hydro-Electric Company). As the scheme was of such a huge scope, isolated and time consuming nature, the feeding of its workers was quite demanding of cutlery and crockery. (See more KVHS 0113)This bowl was used by SECV workers working on the Kiewa Hydro Electric Scheme (1938 - 1961) in camps and mess halls and at the Mt Beauty chalet. (See more KVHS 0113)This item is a white ceramic State Electricity Commission of Victoria bowl. It is made in England and is of strong and durable ceramic. The 5 mm thickness of the ceramic suggests this bowl (cereal / soup) belongs to a commercial kitchen environment and not domestic. The indent bottom of the bowl is 5 mm deep with a side curvature ratio of 2:5. The ceramic is glazed to a commercial standard (workers' mess). See also KVHS 0128 (B - D) for other ceramic crockery.The red printed seal of the State Electricity Commission of Victoria is imprinted on the top outside rim within a curved scroll and a raised fist with electrical "Charges" extending out. Snuggled within the borders of the scroll is a banner with the 5 stars of the Southern Cross. On the underside "Vitrified sold by Cafe & Hotel Supplies Pty Ltd Dunn Bennett & Co. Ltd. Burslem. Made in Englandcrockery; state electricity commission of victoria; dunn bennett pty. ltd.; bowl