This glass lens was recovered from the wreck of the Falls of Halladale. Its purpose is unknown but could have been a clock face cover, a lamp or torch lens or even the lens from underwater equipment. The FALLS of HALLADALE 1886 - 1908- The sailing ship Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roof tiles, barbed wire, stoves, oil, benzene, and many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. The ship had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. The new raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. This glass lens is significant for its association with the wreck of the sailing ship the Falls of Halladale. The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). She was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the vessel was one of the first ships to have fore and aft lifting bridges as a significant safety feature still in use on modern vessels today. The subject model is an example of an International Cargo Ship used during the 19th and early 20th centuries to transport goods around the world and represents aspects of Victoria’s shipping industry. Glass lens; transparent glass rectangle with bevelled edges. It was recovered from the wreck of the Falls of Halladale. flagstaff hill, warrnambool, flagstaff hill maritime museum and village, shipwreck coast, great ocean road, shipwreck artefact, falls of halladale, glass lens, rectangular lens, glass cover

Two clear heavy duty plastic magnifier lenses rectangular in shape, one lens is larger than the other, the lens is flat on one side and convex on the other. A silver metal attachment for spectacles possibly is screwed to the middle of the lens. Magnification and manufacturer not known. Plastic attached to metal posts with clipsassistive devices, association for the blind

Black leather-leather look (Vinyl) rectangular box. Main lens and 2 viewfinder lenses on the front. Black leather handle, one view finder and metal opening latch on the top. One view finder and a winder key on the right hand side. Red film counter viewing window on the back, with markings (see below)No.2 Brownie / Use film No. 120 / Made in US by Eastman Kodak Co. Rochester NY

These cameras were made in Japan by the Canon Company which dates from the 1930s. Canon cameras were, and still are very popular as they are compact and have a simple ‘point and shot’ mechanism. The taking of family photographs has been a hobby for over 100 years.These cameras have no known local provenance but are retained for display purposes. .1 This is a Canon Elph Camera. It is rectangular in shape and mainly silver-coloured with a black lens. A black cord for holding the camera is attached. The camera is in a grey cloth bag. .2 This is a Canon Sprint camera. It is rectangular in shape and has a black body. A black cord for holding the camera is attached. The camera is in a buff-coloured cloth bag. This is slightly scuffed. .1 Canon Elph Canon Inc. Made in Japan 3104104 .2 Canon Sprint Approved JC11 canon cameras, history of warrnambool

This camera was manufactured for a period of around 20 years, firstly in the USA and later in Great Britain. It is a simple to use basic model which used 127 film.This camera has significance as a very popular and cheaply made model which made photography accessible and relatively inexpensive to many..1 This camera is a rectangular hexagon shape with metal top and bottom and bakelite body. It has two circular winders on the bottom and a flip up section on the top which reveals the viewfinder.. There is a narrow neck strap attached with metal screws. There are two circular sections on the front , one being the lens. .2 The rectangular box is solid black cardboard on the base and is fitted with a yellow .1 Brownie Reflex Made in England by Kodak Ltd London. .2 Made in Great Britain by Kodak Limited London Brownie Reflex with Flash contacts.brownie reflex camera, warrnambool history

This camera, known as the Manhattan Optical Cycle Wizard was made towards the end of the 19th century and the beginning of the 20th , when the pastime of photography was popular and people were also becoming more mobile. They were relatively cheap to buy and portable .An interesting item which shows the early mechanisms of cameras.Black rectangular hard cardboard and wooden case with a leather type covering. It has a leather strap handle attached with metal keepers. The bottom is hinged and opens to reveal the lens and other components of the camera which expand out when in use. The metal fitting on the inside are white metal. The top has an inner section which closes with two metal clips. It opens to reveal a rectangle of opaque glass held in place with two small metal clips.Cycle Wizard Manhattan optical co. N Y. Bausch & Lomb Opt Co Pat Jan 8 . 91.black cycle wizard, wizard camera, warrnambool history

This camera is a Premo model made early in the 20th century by the Eastman Kodak company of U.S.A. Premo model cameras were produced in three sizes. Box cameras such as this were produced up to the mid 1920s and were popular with amateur photographers because of the simplicity of the mechanism. This camera has no known local provenance but is retained for display purposes.This is a rectangular-shaped wooden box covered with a black leather trim. On one side is a leather handle attached by two metal buttons. The lid was originally opened by two metal clips at one end and two metal hinges at the other but most of these attachments are now missing. Recessed into the lid are two compartments for storing the film plates. Inside the lid is a glass plate covering the storage area and a spring-loaded lens mechanism with a glass lens and a pleated cloth attached to this lens. The leather on the outside of the box is somewhat scuffed and torn.‘The Premo Camera Made in U.S.A.’ ‘Manufactured by Eastman Kodak Co. Successor to Rochester Optical Co. Rochester N.Y. U.S.A.’

Box cameras were first produced in the late 19th century and were intended to be used by amateur photographers. This type of camera was a simple one with the lens at one end and the film at the other and the provision for 12 photographic plates. The spring-loaded lens folded into the camera and one side of the box served as a base for the lens to sit on. Cameras of this size and shape were made until the mid 1920s. This camera case is retained for display purposes.This is a wooden rectangular box which is covered in black leather. The box is a camera case and has a top lid with metal hinges and metal clips and five glass apertures. There are two knobs or buttons which were originally adjustable mechanisms and the remnants of a leather strap on one side of the box. The leather on the outside is partially torn away. Inside the box the photographic mechanisms and the lens are missing but there is a part of the metal spring still evident. There are also eight photographic plates loose inside the box. early photography in warrnambool, history of warrnambool

This camera, made by the American firm of Eastman Kodak, was the best-selling folding camera during the first half of the 20th century. This is the ‘autographic’ model as there is provision at the back of the camera for note-taking. This model was made between 1915 and 1926 and it is called the soldier’s camera because of its compact size. Over 1,000,000 cameras of this type were sold during World War One. This camera belonged to C.C. McNeil of Caramut, a town 55 kilometres north of Warrnambool. This camera is of interest as it belonged to a person from the Warrnambool district and it is a good example of a pocket camera with note-writing facilities. This is a black metal camera in a rectangular shape with rounded edges. It has three glass apertures and a metal winder. It also has an opening shutter at the back of the camera where notes can be written on to the paper backing of the film. The front of the camera opens and a concertina-like metal attachment affixed to the back of the camera can be pulled out to reveal the lens. This is covered in black leather. Printed information etched into the surface can be found in various locations around this camera. Vest Pocket Autographic Kodak U.S. Patents – Mar 4 1902, May 6 1913 Eastman Kodak Co. Rochester N.Y. U.S.A. Celia C. McNeil Caramut 20th century photography, history of warrnambool

This camera is a folding one, the Ensignette No 2 model made by the British firm of Houghtons Ltd which was originally a glass warehouse founded in 1834. The firm of George Houghton and Sons, dating from the late 19th century, established their camera business at Ensign House in London in 1903 and the Ensignette No 2, designed by a Swedish engineer, was introduced in 1912. Eastman Kodak of America produced a film for this model. This camera was a popular one with amateur photographers and the general public, being affordable, compact and easy to use. This camera is retained as an example of a British-made folding camera dating from nearly 100 years ago. It will be useful for display..1 This is a black metal camera which is rectangular in shape. It is a strut folding rollfilm camera with a lens that is folded inside in a thin leather concertina or bellows covering. It has the maker’s name and logo etched into the front of the camera. The logo is a flag with the British Union Jack in one corner and the word ‘Ensign’ inside the flag. The metal on the back of the camera is rusted. .2 This is a brown leather cover for the folding camera described above. It has a top lid flap which closes with a metal stud and a leather handle stitched on to the sides of the case. The cover is much worn and scuffed. Ensignette No 2 Ensign British Made Made by Houghtons Ltd England vintage cameras

Box Brownie cameras were first produced early in the 20th century by the Eastman Kodak company in U.S.A. They were bought by amateur photographers and were very popular because they were easy to use and affordable for the average householder. The Brownie Flash 11 camera was produced by the Australian Kodak company in Melbourne from 1958 to 1963. 500,000 of these cameras were made during that time. This camera and case are retained as they are good examples of a box Brownie camera made in Australia in the late 1950s and early 1960s..1 This is a box camera with a metal body and a synthetic leatherette covering. It has a horizontally-striped front panel and two glass finders. It also has metal pin and screw flash contacts and a built-in close-up lens. It has a leatherette strap. .2 This is a light brown leather/latex case which is rectangular-shaped with a curved top, a metal catch and a shoulder strap with a metal buckle. The case contains a small booklet with information on how to use the camera. .1 Kodak Kodet lens Brownie Flash 11 Camera Kodak Australasia Pty Ltd Melbourne Australia Close Up .2 Made for Kodak (A/asia) Pty Ltd by Frank Carew & Co, Northcote, Vic Reprocessed leather/latex vintage cameras, history of warrnambool

This magic lantern or slide projector was used to project glass slides on to a screen The magic lantern was the chief visual entertainment for the public before the introduction of the moving picture and consequent cinema entertainment. This one probably dates from about 1915 but its provenance is not known.This magic lantern is an important and interesting object as it shows us the way people in the early 20th century were entertained. The few people who owned this type of projector would give public showings of slides of people and scenes and sometimes raise money for a charitable cause in this way. This is a glass slide projector or magic lantern with a rectangular metal lantern body partly open at the back. The back has a top section that is attached with a metal hinge and lifts up and outwards. The lantern base also has a side opening with a metal knob for opening and a metal panel with a blue glass inset. Inside the lantern body is the lamp and an electric cord (the illuminant system may have originally been fuelled by paraffin or another oil burner). On top of the lantern body is a smaller rectangular metal box in two sections. This can be removed. The illuminant system is brass and slides out. It has two mechanisms for adjusting the focus and a covering over the lens opening which can be pulled up. There is also a wooden slide holder which can be pulled in and out of the projector. ‘W.B. British Made’ social history, history of warrnambool, glass slide projector

The stereoscope was an interpretation device used to interpret aerial photography and the landscape. It was used by National Parks Victoria located at Mt Beauty to look at aerial photos so that they showed up the relief of the topography and therefore looked 3D.Used by National Parks Victoria staff located at the Mt Beauty office during the 1970's and early 1980's.Dark green wooden box with padded protection around the perimeter and on lid where 2 rectangular pieces of wood touch the stereoscope. The box is fitted with wooden dividers that fit around the stereoscope. The stereoscope is green metal with folding legs and sides attached to allow the stereoscope to sit on a surface. The instrument has 2 round glass ('mirrored viewing lens') cylinders eye distance apart, that allow light in from the side swinging doors. The amount of light is constricted by a rectangular piece of metal at the top of each leg. The box has swing clips used to close it and a metal swing handle all on the front side.The hinges are reinforced (and offer protection) by additional rubber pieces at each end. Inside the box is a brush made of bristle with a wooden handle - used for cleaning.Outside and top of box: written in black: No. 1026. On blue tape beneath: Mirror stereoscope 1026. written in black centre top of box: W10/WKA.0233. On front edge of box written in black: W10/WKA 0233. Inside box lid on silver plaque: Stereoscope Universal/ Made in / Australia / Die Casters Ltd. Victorianational parks victoria. stereoscope. aerial photographs. scientific instrument. mt beauty. 3d

This camera was made for the mobile photographer and the camera manufacturer Kodak was at the peak of production. Mr. George Eastman, the company's founder, who invented roll film, which could withstand the outdoor activities and therefor replaced photographic plates. In 1900, the Box Brownie camera was first released Kodak's motto was' "You push the button, we do the rest," The film used in this camera was Kodak Verichrome 620 introduced in 1936 and only went out of production 2009. This camera was a vintage 1970s one. Between 1963 and 1970 the company sold 50 million of this type of camera. The production of smaller and more user friendly digital cameras, mainly from Japan finally nailed the coffin lid on the Kodak Company. Ironically, one of Kodak's engineers called Steve Sasson, devised a camera that could save images using electronic circuits. The images were transferred onto a tape cassette and were viewable by attaching the camera to a TV screen, however Kodak tried to maintain its photographic film products beyond its "use by date". In1975 Kodak becomes the first company to make a digital camera, however the Japanese manufacturers could make smaller and more compact cameras ending Kodak's monopoly and eventual demise.This particular "box brownie" was used by Margaret Shefford, nee Turner, who with her husband retired, in the 1980s, to Mount Beauty. The camera was purchased in the 197's and used on their cruise to England. The significance of this item is that at the time of its introduction to Mount Beauty the camera was a "state of the art", for general public, camera introduced by an ever increasing influx of retirees. This identifies the Kiewa Valley not only as an attraction for sightseers and overseas tourists but also retirees. The social implications of this trend will continue to provide a broader requirement for medical and other facilities geared up to the requirements of an aging population. As a lot of cities in Australia have increasing levels of violence (mainly drug related) rural "retreats" are becoming more sought after by sections of "the gentle populous"This is a black metal rectangular camera, rounded on the ends and has silver colored fittings(stainless steel) and a small leather handle on hinges the left side (facing the lens). The folding lens and shutter component fold out from the main compartment. Two metal arms swing out and hold the lens and collapsible lens body to the required length. When not in use this collapsible (folding) lens extension is fastened to the main body structure providing security and preventing damage to the folding material. The camera has a collapsible eye piece or view finder at the top end. The right hand bottom end has a cylindrical film wider (polished steel). Inside there are two cylindrical cavities, one holding the roll of unexposed film and the other (winder) end a cylinder onto which the unexposed film is wound through for each picture frame. There is a locking mechanism to hold the folding lens structure to the main box structure. See KVHS 0419B for its carrying caseNo external makings but when the lens is folded out it exposes manufacturing information on metal base around the lens " Kodette II B I shutter"(B= Bulb and I= Instant), underneath this, in larger print, is "'FOLDING 'BROWNIE' SIX - 20" below the lens and in smaller print, "made in Great Britain" and underneath this "by KODAK ltd"kodak kodette ii, folding brownie camera, photography, hobby personal item, tourist gadgets.

They were made from 1913 and they probably weren't very expensive cameras. The Hawk-Eye No. 2 model C of 1913 was a simpler model with just one viewfinder, and no choice of aperture. This version was reissued in 1930 for Kodak's 50th anniversary: For this, the company offered a free Hawk-eye camera to any child of 12 in that year. Approximately 550,000 of these were issued.[A box camera is a simple type of camera, the most common form being a cardboard or plastic box with a lens in one end and film at the other. They were very popular in the late 19th and early 20th centuries. The earliest Kodak's were simple box cameras which were sent to a local dealer after all the shots on the film inside were taken. The dealer developed the film and sent the photographs and the reloaded camera back to the photographer. While introducing a wide range of innovative features two designs dominated Kodak's cameras. The most famous of these was the Box Brownie, designed by Frank Brownell, and introduced at the cost of one dollar in 1900. Brownie's were produced in one form or another up until the 1960s when the Kodak Instamatic was introduced. A Cartridge Hawkeye No. 2 Box Camera. It i has a cardboard body and the body is covered in black leatherette. The camera is designed to be used with Kodak No 120 film. It is a rectangular box with a hole at the front (no lens). The shutter control is on the right side. The film winder is below the latch. The film window is at the back and there is a leather carrying handle at the top. Back - Made in Great Britain Use Kodak No.120 film Kodak Handle - No. 2 Cartridge Hawk-Eye Model Cphotography kodak camera box-camera

This camera was designed by William Johnston in 1904. Production began in 1905. There were many versions, the number indicated the length of film which corresponds to the width of the panorama. Originally designed for photography of large groups of people. Later it was used for landscapes. This camera was used by the local Lorne photographer William Anderson who took photographs of visitors and local scenes. William purchased Norman Brown’s photographic business in December 1899 and worked in Lorne until his death in 1948It is a large format rotating panoramic camera. A concertinaed fine leather tube with the adjustable lens is contained in a black wooden leatherette covered rectangular box. On the top is a metal winding handle, a series of weights and a carrying handle. The lens is a Gundlach - Manhattan rapid recto graph. The camera rotates on a geared tripod through 360 degrees with the film driven past the exposure slot by a clock work motor.cameras, lorne, william anderson,

Small rectangular cardboard box containg a black cylindrical metal and rubber flashlight or torch. The outside of the cardboarch container has black ink markings for identification and manufacture. A white printed ID label containing a barcode is attached to the bottom of the box. The pocket light has a metal attachment clip on its side and a rubber covered on/off switch on the bottom of the light. The body of the light has a knurled section for grip. The lens top section of the field pocket light unscrews of the body to enable the top of the pocket light to be unscrewed to enable battery insertion.FPL-3000 Military Pocket Light Made in Australia NSN no: 6230 66 139 1304 Ocean Graphic Pty. Ltd. Melbourne, Victoria, AUSTRALIA. *6230661391304023* FPL-3000 Black/Green Filter The field pocket light has the NSN marking 6230-66-139-1304 with the Department of Defence arrow marking at the side of the top of the flashlight.fpl-3000, military, field pocket light, australian military

This light bulb or globe was used for lighting the torch of an electronic tongue depressor. It was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII 1941-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Lens bulb, NEICO #24B -2.5v, for an electronic tongue depressor in original cardboard package; part of the W.R. Angus Collection. The package is rectangular and the base slides out, giving access to the small globe. Package reads "Genuine NEICO #24B -2.5v lens bulb for National Model N24 tongue depressor. Operates from battery handle or Transformer. Long life. Brilliant", "Made in U.S.A.. Tested and sealed at factory", "National Elec. Instr. Co. Inc. Long Island, New York". "Apply current gradually until filament is changing from yellow to a white light - THEN STOP. Glaring Illumination indicates excessive voltage which shortens filament light without increasing illuminating efficiency."flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, medical treatment, medical history, national electric instrument company, electronic tongue depressor, lens bulb

Camera rectangular "six-20 Brownie C" with wide and narrow angle lenses. Manual film changer and push button for shutter. Opens at back with catch to hold, and leather hand strap with "Made by Kodak Ltd London".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

The popular box camera of Eastman Kodak of U.S.A. was a camera with a simple lens. It provided snapshots at a low cost and was the most popular mass marketed camera for Australians at the time. It remains in Hymettus, the home of its original owner, Patrick (Paddy) Taffe.This camera is of interest for two reasons: 1. It is an example of the Box Brownie camera which was a very popular camera owned by many Australians in the early 20th century. 2. It belonged to Patrick Taffe of Hymettus in the early 20th century and with other cameras in the house across the generations, illustrates the changes in popular photography across the century into the 21st century.Black leather covered rectangular box of heavy board. Main lens and 2 viewfinder lenses on the front. Black leather handle, one view finder and metal opening latch on the top. One view finder and a winder key on the right hand side. Red film counter viewing window on the back, with markings. Leather at rear lifting and metal attachments rusting.Stamped into leather 'Use Film 116A with a small metal plaque reading, "Made in USA by the Eastman Kodak Company Rochester NY. USA 14403."photography, ballarat, taffe, hymettus,

Camera used by the Humphries family in the 1960'sRectangular box shape Kodak Instamatic camera 133. Front: silver & black colouring, with a rotating lens for daylight & night/flash, square lens, shutter button Back: black colouring with clear plastic window to show film cartridge (Name: HUMPHRIES) Right-hand side: hand strap Black vinyl zippered case for the camera, includes Kodacolor Film Cartridge Gold 200 Size 110Instamatic 133 Camera, Kodak (Made in England)

Kerosene Lamp for a bike. Tin rectangular shape painted black. Silver round edging surrounding a glass lens. Protruding from the side is a small triangular shape with a red lens facing back. Also at the back is spring bracket used for mounting the lamp on the bike. One side also has a regulator dial. bike, bicycle, lamp

Metal curved rectangular box with handle on top and round lens at the front bike, bicycle, lamp, dry cell

Round glass lens stored in rectangular cardboard box with lid and supported by cotton wool.On inside of box in pencil: “20/1/40 (?dictatomigialls of l/4). On top of box: “wray flat”.

Leather case with leather strap, containing: * Plate Camera (rectangular shape, back opens for plates to be inserted, front opens out and concertina lens can be extended out * 6 x plates of the camera * red clothcamera, photography, plate camera, photos,

This camera went ashore at Gallipoli on the first day of the invasion 25/04/1915.Metal silver Vest Pocket Kodak Camera. Rectangular box type with scissor pop out lens. Bellows made of leather During WW1 it was marketed as a camera suitable for soldiers due to size and portability, often referred to as "The soldiers camera". It has small shutter release button mounted above the lens plate and below the lens there is a slider for choice of apertures, It originally used A127 autographic roll film. The case is small leather black rectangular shaped with flap and press stud to keep shut.On plate holding the lens-:VEST POCKET KODAK Patented Mar 4,1902,May 6,1913 On bronze piece surrounding the lens -: 25BT50 clear ...brilliant tripod gray 1/2 sec ...dull 3/4 sec...very 01 sec Made by Eastman Kodak Co Rochester USA Autotime patent 1908 cloud marine distant view ave rge view nearview portrait No markings on leather case.

Would have been used for eye protection by drivers of automobiles before they were completely enclosed, by airmen in open cockpit airplanes, by balloonists, or by motor cycle riders. Hinged goggles, metal framed glass lenses, stockingette & wool protective rims behind lenses. Elastic fastener for securing to head. Tin container, rectangular to hold goggles, coloured mainly yellow, hinged lidOn tin: Around lid: "Made in France". Around tin: "OTO" several times. Also several balloon-shaped trade marks. Black painted picture of goggles on top of box. Lettering in trade mark "Marque Deposé / Brevete SGDG"driving equipment, eye protection, cars, motor cycles, motor bikes, airplanes, pilots, dispatch riders

Detached sector panel from upper lantern. The lens segment is one of a pair of freestanding panels that formerly stood on a platform in the upper lantern room on either side of a small fixed light. The platform rested above the 1860/62 Chance Bros. first order, fixed lens and could be accessed by a ladder. The two sector lens panels were each set in a bronze frame and comprised a curved wider (belt) piece in the centre with nine curved, slim line pieces above and below it (19 pieces in total). The belt aligned with the light source to provide optimal focus and range. The panels, the light and the platform were installed in 1934 to upgrade the original optical system with red warning lights. Fitting them above the lantern was a convenient and inexpensive way to do this, with each lens panel set up behind a red glass panel to project a red sector to the seaward over to Cape Howe and the Western Shore. The two sectors are likely to be Chance Bros. by manufacture although they do not appear to bear the maker’s name. This is probably because Chance Bros. typically fixed metal plaques to their apparatus and tended not to stamp smaller components such as their lens frames. It could possibly indicate that the two sectors are former components of a larger system, i.e. another lens. This can easily be confirmed by closely inspecting the bronze frames. A series of holes on the frame would indicate that ‘they would have bolted to other panels to make a larger lens assembly’. The absence of holes would confirm that ‘they were made specifically to stand alone’. The sector panels were removed from the Gabo lantern in February 1992. At some point after their removal, they were found in boxes marked with ‘Ince Pt.’, however it is thought that Ince Point lighthouse ‘never had … stand alone sectors’. The panel in the Gabo Island collection is one of two segments discovered at the Eden Killer Whale Museum in about 2007. One section was repatriated to Gabo Island and the other was to go to Smoky Cape Lighthouse in northern NSW. The Gabo lens segment has first level contributory significance for its historic value and provenance to the lantern room. It is recommended that Parks Victoria/AMSA seek to return the Smoky Cape segment to Gabo Island and reunite the sector panels.The Gabo lens segment has first level contributory significance for its historic value and provenance to the lantern room.Section of a lens from a lighting apparatus , rectangular louvers of glass enclosed in a metal frame.

Manufactured by Holden and Frost for the illumination on buggies during the period of ca1900Manufactured and sold by Holden and FrostBlack painted steel carriage lamp. Oval front lens, red dimple lens on rear ,clear glass sides rectangular in shape, oval dome chimneyPatent no 270buggies, lamp, civilian