The Royal Corps of Australian Electrical and Mechanical Engineers (RAEME; pronounced Raymee) is a corps of the Australian Army that has responsibility for the maintenance and recovery of all land electrical and mechanical equipment. RAEME has members from both the Australian Regular Army and The Army Reserve. Prior to being given the title of 'Royal', the Australian Electrical and Mechanical Engineers (AEME) were raised on 1 December 1942. Some 64 years later, on 1 December 2006, the last independent RAEME Workshop was disbanded. RAEME soldiers continue in their role to provide support through attachment to other units in Tech Support Troops, Sections or Platoons.Wooden Plaque 15cm x 13cm with insignia of Royal Australian Electrical and Mechanical Engineers Royal Australian Electrical and Mechanical Engineers

To signify a service members contribution to their Corps (RAEME) of the Royal Australian Army and upon their leaving at 15 years of service. The name plate indicates member F. LE' Compte. Royal Australian Army - RAEME Corps, member F. LE' Compte, 4 Base Workshop Battalion. Wooden trophy with synthetic plate signifying a farewell remembrance from fellow service personnel within the Number 4 Base Workshop Battalion. RAEME being "The Royal Australian Army Electrical and Mechanical Engineering Corps. From CO and Members 4 Base Workshop Battalion May 64 - 79. F. LE' Compte. The synthetic name plate also has the RAEME Corps emblem which is : : 'Upon a lighting flash a horse forcene gorged with a coronet of four fleur-de-lis, a chain reflexed over its back and standing on a globe. ... The horse forcene and chain are symbolic of power under control and the lightning flash, of electrical engineering.raeme corps, royal austrlaian army 64-79, f. le'compte

This beret is symbolic to the Royal Australian Electrical and Mechanical Engineers and is held in the highest regard by serving and ex-members of that corp.Saint Eligius was the patron saint the Royal Electrical and Mechanical Engineers and he is best known for being the patron saint of horses which is depicted in the RAEME insignia.Black woolen beret with cotton headband. Attached is a small metal badge, or insignia featuring a golden crown, a ribbon, a lightening bolt and a horse rearing atop a ball and chain.R. A. E. M. E.royal australian electrical + mechanical engineers, raeme corps, uniform, beret, insignia, vietnam war, diamond valley vietnam veterans sub branch

Item belonged to Lieutenant Leonard V. GREAVES 310387. Blue lanyard and shoulder patches indicate GREAVES served with the Royal Australian Electrical and Mechanical Engineers (RAEME)The Royal Corps of Australian Electrical and Mechanical Engineers (RAEME) is a corps of the Australian Army that has responsibility for the maintenance and recovery of all Army electrical and mechanical equipment. RAEME has members from both the Australian Regular Army and the Army Reserve. Prior to being given the title of 'Royal', the Australian Electrical and Mechanical Engineers (AEME) were raised on 1 December 1942. Some 64 years later, on 1 December 2006, the last independent RAEME Workshop was disbanded. RAEME soldiers continue in their role to provide support through attachment to other units in Tech Support Troops, Sections or Platoons.Short jacket with shoulder epaulets made from khaki material with blue lanyardShoulder patch - Royal Australian Electrical and Mechanical Engineersraeme, battle jacket, army, lt. leonard greaves

Royal Australian Electrical & Mechanical Engineers X (2)badge/buttons, 1960, army

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. This uniform was donated by a RAEME member who served during the Vietnam War. The Corps began sending advisers to Vietnam in 1964 and this foreshadowed a massive build- up of RAEME personnel and equipment which peaked in 1971. The first direct RAEME support was provided in early 1965 as part of 1 Aust Logistic Support Coy (1 ALSC). Prior to 1971 the RAEME elements of 1 Australian Logistic Support Group built up to a stage where there were two field workshops. The withdrawal of all Australian forces was completed in 1972 and RAEME reverted to its peacetime role.This uniform was worn by a member of the Wodonga community who served with RAEME during the Vietnam War. RAEME Corps members are also represented at the Army Logistic Training Centre at Bandiana.Australian Military uniform - this uniform was issued during Australia's involvement in the Vietnam war. It was worn by a member of RAEME (The Royal Australian Engineers), Damien Hunt who is a resident of Wodonga.On shoulder badge: "ROYAL AUSTRALIAN ELECTRICAL / & MECHANICAL ENGINEERS"raeme, military uniforms, australian army

Wooden, shield shaped plaque, badge of Royal Australian Electrical & Mechanical Engineers affixedPresentation plate: Presented to 4/19 PWLH Offrs Mess by Capt F J Bell 4 Sep 69plaque, raeme, plaque, raeme

standard style of a jacket battle dress from the late 1940s to 1982; it was used for parade dress; this jacket was worn by a warrant officer class 2 of the Royal Australian Electrical and Mechanical Engineers.This jacket has historical significance because it representative of a standard style service battle dress worn by soldiers of the Australian Army Post WW2 until the introduction of the modern polyester cotton uniforms. It is also in excellent condition, which is special considering it's age. Waist length jacket, with two breast pockets either side, collar, olive green, two shoulder patches on both side ones says “Royal Australian Electrical & Mechanical engineers” in Bright yellow/gold writing on a in navy blue shoulder patch; a ranking insignia of Warrant Officer class 2 above the cuff of both sleeves Label located inside the jacket on the right hand side it says “A.G.C.F. VIC 1977 8405.66.025.6423 Size of chest: Size. 109/112PR. Yarra Falls. Batch 21657. Dry clean only Crease upper half of labels only.jacket, jacket battle dress, jacket khaki

Army Jacket Dinner Dress, Lt Royal Australian Electrical & Mechanical Engineers with Insignia (Stored with trousers U112)uniform, c1950, army

Beret, black felt with reinforced black hat band, 2 air vents RHS & back. Silver RAEME (Royal Australian Electrical & Mechanical Engineers) badge in front.costume-male, headwear, military history - army, raeme, passchendaele barracks trust

The Corps of Royal Australian Electrical and Mechanical Engineers (RAEME) has the major responsibility for the maintenance, recovery and repair of the Army's electrical and mechanical equipment.australia. army. corps of royal australian electrical and mechanical engineers - history, military engineering - australia - history - 20th century

White dress jacket for Sergent from Vietnam war. Royal Australian Electrical and Mechanical Engineers RAEME

Royal Australian Electrical and Mechanical Engineers stable belt. Dark blue in colour with red and yellow stripe.Motto on buckle ARTE ET MARTE with badge of RAEME.

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. This item, was presented to the Council of the Rural City of Wodonga in 1978. RAEME has a strong connection with the city of Wodonga through its service and training facilities at the Bandiana base on the edge of Wodonga. A shield shaped plaque carved with the emblem of RAEME corps (The Royal Australian Electrical and Mechanical Engineers corps). The edge of the shield is decorated with carved leaves. An engraved metal plate has been attached to acknowledge the presentation of the plaque to the Council of the Rural City of Wodonga. The rearing horse and chain are symbolic of power under control and the lightning flash, of electrical engineering. The rearing horse also forms part of the crest of the Institution of Mechanical Engineers and, together with the lightning flash, is intended to mark the close relationship which exists between the electrical and mechanical engineers in both civil and military life. The globe is indicative of the impact of engineering on the world generally.Attached to rear of shield "Presented to/The Council of the Rural CIty of Wodonga/ by/ The Commanding Officer and Members of/RAEME Training Centre/ 21 October 1978"raeme, australian army

Possibly WW2Royal Australian Electrical and Mechanical Engineers Artificer Badge. Metal badge is mounted through an aluminium metal plate and secured with clipsNil

Possibly used during Vietnam conflict.Empty shell case made into trench art in the form of a bottle opener with a Royal Australian Electrical and Mechanical Engineers badge fixed on the sideOn the base of shell case L C 52..

Uniform issued to “Maj Andrew John BALSILLIE MBE”. Refer Cat No 118.5 for his service details and RSL, Council history..1) Tropical green jacket, cotton drill with shoulder rank epaulettes with “Major” insignia, Unit arm patches on both upper arms, left sleeve has embroidered Rising Sun with lettering under, right sleeve has a blue patch with red crown and lettering, a waist let and metal buckle. .2) Tropical green shorts, cotton drillUnit Arm Patches, “Royal Australian Electrical and mechanical Engineers” Left sleeve, “Australian Military Forces” Right sleeve, “Commonwealth”uniforms, tropical

Each button bears the Insignia of Royal Australian Electrical and Mechanical Engineers (RAEME). Part of the Cooper Collection.Collection of four large and seven small round gold coloured buttons. Each button bears a unit insignia - RAEME. Each button has a loop on back for attaching to an army jacket.Stamped on back of large buttons: 'STOKES & SONS, MELB'. Stamped on back of small buttons: 'STOKES, MELB.'cooper collection, uniform, buttons, raeme

Item belonged to Lieutenant Leonard V. GREAVES 310387 who served with the Royal Australian Electrical and Mechanical Engineers 1965-1971.Khaki green woven neck tieraeme, army tie

00511 .1 Royal Australian Army Medical Corps x 2 .2. Royal Australian Electrical and Mechanical Engineers x1 .3. Australia Shoulder Titles x 2 .4. British Title, QUEENS " Royal West Surrey Regiment".

Army mess dress is the formal military evening dress worn by Army officers and senior non-commissioned officers in their respective messes or at other formal occasions. Tailor made item belonging to Lieutenant Leonard V. GREAVES 310387. Badges attached to jacket collar indicate GREAVES served with the Royal Australian Electrical and Mechanical Engineers (RAEME). This uniform serves as an example of the military dress worn by the Royal Australian Electrical and Mechanical Engineer during the late sixties.The Royal Corps of Australian Electrical and Mechanical Engineers (RAEME) is a corps of the Australian Army that has responsibility for the maintenance and recovery of all Army electrical and mechanical equipment. RAEME has members from both the Australian Regular Army and the Army Reserve. Prior to being given the title of 'Royal', the Australian Electrical and Mechanical Engineers (AEME) were raised on 1 December 1942. Some 64 years later, on 1 December 2006, the last independent RAEME Workshop was disbanded. RAEME soldiers continue in their role to provide support through attachment to other units in Tech Support Troops, Sections or Platoons.Two piece dark blue/black material suit consisting of long pants with red stripe and jacket with metal buttons and two badges attached to collaraustralian army mess dress, raeme

Identity discs issued to Leigh Norman Moebus, Regt No 3796848 served Vietnam with the Royal Australian Electrical and Mechanical Engineers (RAEME) 2.7.1970 to 30.6.1971 during his National Service.One Round and One Octagonal Identity disc, brass on a silver chain.“JN.MOEBUS 3796898 CE A Pos Aust”military-equipment, uniforms - army, identity discs

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. Ref: www.raeme.org.au The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units, with the representation varying in size from one or two tradespersons, to small groups of 20 to 30 tradespersons, to large maintenance units with over 150 personnel and a totally integrated military and civilian workforce. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. Ref: www.army.gov.auVarnished Wooden BoardRAEME Badge Jan Zyla George Zyla 2020

"Herbert Rex WILLIS" Reg No. 342872 Service Details. Refer Cat No. 5231.31. Jacket - Khaki colour, wool serge fabric, Battle dress style, belted at the waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with concealed button down flap and sleeve cuffs. Shoulder insignia - with yellow lettering - "ROYAL AUSTRALIAN ELECTRICAL & MECHANICAL ENGINEERS". Rank insignia on sleeves - brown, white and red, - Warrant Officer Second Class. Service Ribbons above left pocket L-R, Vietnam Campaign Medal. Long Service Medal, South Vietnamese Medal with clasp "60-". Light khaki colour cotton twill fabric lining. Manufacturers white cotton twill fabric label - inside on left pocket lining. 2. Lanyard - dark blue colour cotton cord with knots. 1. Manufacturers information on label - black ink print "REGIMENTAL NO./ NAME", Red ink print "M.TX/IZE 5". On pocket lining - purple ink "D^D/ MADE IN AUSTRALIA/ 1954. On collar lining - handwritten, black ink pen "WILLIS" .uniform, army, battle dress, rex willis

Cream wooden framed selection of 9 badges displayed on cream coloured background.Top centre: “BADGES OF CORPS ASSOCIATED WITH PASSCHANDAELE BARRACKS 1964 TO 1977” Underneath each badge: “1. Royal Australian Infantry 2nd Battalion Royal Victorian Regiment 2. & 3. Royal Australian Army Service Corps 4. Royal Australian Electrical & Mechanical Engineers” 5. Royal Australian Army Medical Corp 6. Australian Army Catering Corp 7. Women's Royal Australian Army Corps 8. Royal Australian Army Ordnance Corps 9. Royal Australian Corps of Transportpasschendaele barracks trust, badges, framed

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. The royal ascent was granted in 1948. The Royal Australian Electrical and Mechanical Engineers (RAEME) is a technical corps tasked with the maintenance of the Army's modern hardware and equipment. RAEME personnel are represented in most Army units. The Royal Australian Electrical and Mechanical Engineers corps motto is ‘Arte et Marte’, which is Latin for ‘With Skill and Fighting’. This item, was presented to the Council of the Rural City of Wodonga in 1978. RAEME has a long association with Wodonga due to its service at the Bandiana base just outside of Wodonga. The inscription on the side of the base reads: "Presented to the Citizens of the Rural City of Wodonga by the Commanding Officer and members of RAEME Trg Centre on the occasion of the granting of the Freedom of the Rural City of Wodonga to RAEME Trg Centre 21 October 1978RAEME Corps has a long association with the city of Wodonga through its involvement in training and logistics at the army base at Bandiana.An award featuring a small model of the cannon "Zamzama" (Captor of Forts) mounted on a polished wooden base. The award includes a plaque outlining the significance of "Zamzama" on the top and another plaque explaining the significance on this award on the front of the base.Explanation of "Zamzama" beside cannon: "ZAMZAMA (CAPTOR OF FORTS)/ The original 14' 4 1/2" long, with 9 1/2" bore, was cast in brass in one/ piece by Muslim engineers in the year 1757 on the orders of the/ emperor AHMAD-SHAH-ABDALI. It was used in several battles and/ proved its value as a great weapon of destruction. It soon became to be/ regarded as a "Tallsman of Power" and continued as such until it was/ ruined in 1818 at Multan. Today it is housed in Lahore, where it was/ placed by H.R.H. the Duke of Edinburgh in 1870."raeme, rural city of wodonga, freedom of the city wodonga, australian military, bandiana

Technical manuals and User Handbooks were essential equipment for Royal Australian Electrical and Mechanical Engineers (RAEME) tradesmen permanently attached to Armoured Corps regiments as Light Aid Detachments (LAD) or AFV Workshops and were responsible for repairs and maintenance of a nature beyond the expertise of AFV crewmen and just short of major rebuilds undertaken by Base Workshop detachments.Part of a collection of workshop manuals and user handbooks relating to equipment on issue to 8th/13th Victorian Mounted Rifles during the latter half of the twentieth century.Buff and brown coloured soft covered manual, adhesive fabric spine bound manual being Assembly Operation GMC 6x6 Model CCKW - 353, produced by General Motors Truck and Coach 24th October 1941On title page " M.F. Oates " also ink stamp ' 8/13 VMR Regimental Collection "

The pennant designed and cross stitched by Margaret Thorpe to fill in lonely hours whilst Colin Arthur Thorpe was in Vietnam. She presented the pennant to the Currumbin RSL Queensland. In 2018 a small plaque was present to NVVM for the Garden of Remembrance. A cross stitch pennant with the Royal Corps of Australian Electrical and Mechanical Engineers emblem. A blue, yellow and red striped background with the emblem cross stitched in wool with hessian backing.R A E M Ecolin arthur thorpe, 15485, raeme, margaret thorpe

Identification plate is for the Royal Australian Mechanical and Electrical engineers (RAME), 3rd Military District, vehicle number 743.Vehicle identification plate used by the Australian Army.Small square shaped steel metal plate. Khaki coloured paint on rear face. Blue, yelow and red horizontal painted stripes on the front face. White coloured numbers with a narrow horizontal white line painted on front face. Small hole drilled through the plate on the top.Horizontal blue, yelow and red horizontal stripes. Number 3 on top of a narrow horizontal white line with the numbers 743 underneath.vehicle, identification, plate, rame, 3rd military district