standard motor company

Watsford Australia, a Nunawading pneumatic tubing company, has won a quality standard award from Ford Motor Company.Watsford Australia, a Nunawading pneumatic tubing company, has won a quality standard award from Ford Motor Company.cars, watsford australia, ford motor company, watsford, james, frank

2689.01 - Bannerman Collection - Massey Harris Extra Parts List 1923.jpg 2689.02 - Bannerman Collection - Massey Harris Extra Parts List 1923.jpg 2689.03 - Bannerman Collection - Massey Harris Extra Parts List 1923.jpg 2689.04 - Bannerman Collection - Notebook.jpg 2689.05 - Bannerman Collection - Notebook.jpg 2689.06 - Bannerman Collection - Notebook.jpg 2689.07 - Bannerman Collection - Cooper (Sunbeam) Machinery Order Book.jpg 2689.08 - Bannerman Collection - Massey Harris No 789 Combine Service Manual.jpg 2689.09 - Bannerman Collection - Massey Harris Side Delivery Rake Power Drive Service Manual.jpg 2689.10 - Bannerman Collection - Wisconsin Four Cylinder Engine Model VE4 Service And Repair Parts List.jpg 2689.11 - Bannerman Collection - Newage-Austin 4 Litre Engine Service Manual And Spare Parts List.jpg 2689.12 - Bannerman Collection - Massey Harris Sunlifter Bale Loader Service Manual.jpg 2689.13 - Bannerman Collection - H.V. McKay Massey Harris Assembling Instructions No 4 And No 5 Pickup Fronts And Cutter Bars For Sunshine Headers.jpg 2689.14 - Bannerman Collection - Sunshine Harvester Works Sunshine Powerdrive Couplings.jpg 2689.15 - Bannerman Collection - Cletrac Crawler Tractors Operators Handbook Model HG.jpg 2689.16 - Bannerman Collection - Massey Harris 44 Special Tractors 'G' 'K' 'LP' Models.jpg 2689.17 - Bannerman Collection - Massey Harris Hydraulic Equipment 744D, 745, 44K Tractors Duplicate Parts List.jpg 2689.18 - Bannerman Collection - H.V. McKay The Sunshine Pickup Baler Instruction Book.jpg 2689.19 - Bannerman Collection - Massey Harris 701 Baler.jpg 2689.20 - Bannerman Collection - Massey Harris 701 Baler Parts List.jpg 2689.21 - Bannerman Collection - Massey Harris 701 Baler Parts List.jpg 2689.22 - Bannerman Collection - Material Rationaization Programme Recommended Steel Sections For New Designs 1965 - 1966.jpg 2689.23 - Bannerman Collection - The Standard Motor Company 85mm Petrol And Vaporising Oil Engines Instruction Book.jpg 2689.24 - Bannerman Collection - Massey Harris Repair Parts List Number 45 For 101 And 102 Senior Tractors.jpg 2689.25 - Bannerman Collection - H.V. McKay Massey Harris Sunshine Milking Machines Operating Adjusting Servicing Testing Manual.jpg 2689.26 - Bannerman Collection - H.V. McKay Massey Harris Sunshine No 6 Ground Drive Header Service Manual.jpg 2689.27 - Bannerman Collection - H.V. McKay Massey Harris Sunshine No 6 Ground Drive Header Service Manual.jpg 2689.28 - Bannerman Collection - H.V. McKay Massey Harris List of duplicate parts with illustrations for the Sunshine HST Power Take Off Header.jpg 2689.29 - Bannerman Collection - H.V. McKay Massey Harris List of duplicate parts with illustrations for the Sunshine Engine Functioned Pickup Baler.jpg 2689.30 - Bannerman Collection - H.V. McKay Massey Harris List of duplicate parts with illustrations for the Sunshine Milker.jpg 2689.31 - Bannerman Collection - H.V. McKay Massey Harris List of duplicate parts with illustrations for the Sunshine No 2A Power Take Off Header.jpgmassey harris, sunshine harvester works

invoices circa 1965 Bendigo businesses and sales. The McIvor Brick Company began building work in 1950 making this a fairly early invoice. D N Dean was Douglas Niven Dean (1917-2000)Miscellaneous invoices related to Mr. Douglas Dean, 26 Bolt Street, Long Gully: 10558a Contract for transfer of property (legal document Hyatt, Willis & Hyatt Solicitors, Bendigo) 10558b State of Victoria, Motor Car Act 1958 transfer of sale for a standard sedan Rego No HXP 668 from Mr. J. Wells to Mr. D. Dean on 8 Feb. 1965 10558c Miscellaneous invoices related to purchases by M. D. Dean, 26 Bolt Street, Long Gully (Eight from Bendigo Timber Co. Ltd., One from McIvor Brick Co. Ltd.)motor registration, property transfer, dean

This external horn is part of an Edison Fireside Phonograph made in c.1909. The horn was attached to the machine when in use. The rings on the side of the horn allowed the horn to be suspended above the machine. The narrow opening on the horn was attached to the sound outlet on the machine and the conical shape of the horn amplified the sound. The horn was suspended to allow a clear sound. This was done by attaching the ring fitted to the outside of the horn to a chain or chord, which in turn was attached to a curved wire fitted to the phonograph machine. The phonograph machine was invented by Thomas Alva Edison in the late 19th century. Edison adapted the idea used when sending messages over a telegraph machine. He patented the phonograph in early 1878. The phonograph was able to record sound and play it back sound. This amazing invention opened up a whole new world of entertainments, where wax cylinders of pre-recorded sound could be purchased with a wide variety of music and played over and over. The first wax cylinders were white and used a combination of bees' wax and animal fax or tallow. By 1892 Edison was using 'brown wax' cylinders that ranged from cream through to dark brown. The Edison Phonograph Company was formed in 1887 to produce these machines. He sold the company in 1855 to the North American Phonograph Company but bought that company in 1890. He started the Edison Spring Motor factory in 1895 and then the National Phonograph Company in 1896. In 1910 the company became Thomas A. Edison Inc. In 1898 Edison produced the Edison Standard Phonograph, the first phonograph to carry his own trade mark. He began mass producing duplicate copies of his wax cylinders in 1901 using moulds instead of engraving the cylinders. The wax was black and harder than the brown wax. The ends of the cylinders were bevelled so that the title's label could be added. The last phonograph machine to use an external horn was produced in 1912 due to the much more robust records being invented. In 1913 Edison started producing the Edison Disc Phonograph. The company stopped trading in 1929. [NOTE: a phonograph machine plays cylinders, a gramophone plays records]This Edison external phonograph horn is significant for its connection to the c.1909 Edison Fireside phonograph model. The phonograph machine brought a new era of music into the homes of everyday people but was only popular for a few decades due to the growing popularity of records, which gave a much higher quality sound and were more robust.Phonograph horn; open horn, a conical shape with the lower part flaring out. The horn's shape on the opening half is octagonal, made from eight joined sheets of metal with a scalloped finish at the opening. The narrow end is hollow and ready to fit onto a phonograph outlet. There are two rings attached together on the side of the horn, perhaps for storing on a hook. The inner surface of the horn has remnants of deep red paint. This horn is from the Edison Fireside phonograph. (There is a mark on the outside of the horn where the Edison brand would be)flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck coast, gramophone, phonograph, music player, entertainment, audio equipment, edison, thomas a edison, horn, phonograph horn, amplifier, audio, sound recording, sound playback, phonograph machine, external horn, edison phonograph company, wax cylinders, edison spring motor factory, national phonograph company, thomas a. edison inc, phonographic cylinder, sound reproduction

This woodworking lathe, connected to both a pulley and a flywheel, demonstrates its historical operation with a steam engine. Such a configuration reflects manufacturing practices from the late 1800s and early 1900s, when steam power was the predominant source for driving workshop and factory machinery. Large machine shops often utilised a single power source, distributing power via roof-mounted belts and pulleys to operate several machines simultaneously. Over time, petrol-driven motors were introduced, and eventually, electricity became the standard power source. Conversion kits were made available in the late 19th and early 20th centuries to adapt older lathes to these newer, cleaner fuels. Manufacturer's History: W.F. & J. Barnes was a renowned maker of hand- and foot-powered treadle woodworking and metalworking machinery, established in 1869. The partnership between William F. Barnes and John Barnes was formalised in 1872, and the firm was incorporated in 1884. Their machines were used for both ‘farm’ applications and professional engineering. By 1881, the company began producing electrically powered machinery. By 1937, W.F. & J. Barnes expanded into manufacturing machinery for automotive assembly. The business closed in 1983, and in 1998, LeBlond Ltd. of Ohio acquired the firm. The lathe was donated by Briggs Marine, Melbourne: In Flagstaff Hill’s formative years, 1972-1975, Briggs Marine, Melbourne (Briggs Brass Foundry), donated equipment and objects used or made at their premises. The foundry was established in 1912 by Herbert Harrison Briggs. In 1965, the firm was owned by partners Cyril Briggs and Frank Lee: Cyril died in 1967, and Frank died in 1971, so the foundry was then run by his son and daughter-in-law, Les and Eva Lee. Briggs Marine’s Warrnambool Branch closed in 1972 after the death of Frank Lee in 1971. Flagstaff Hill’s founding director, John Lindsay, recalled that Briggs Marine’s family members gave personal assistance in setting up the displays in the original village shops, particularly the ‘Brass Foundry’ building, around the time the Maritime Museum opened in 1975. Briggs Marine still exists today, but the Briggs family is no longer involved. This early 1900s lathe marks a significant stage in the evolution of machinery, positioned between the era of hand-operated machines and the advent of electrically powered equipment. Its presence exemplifies the progression of industrial technology and craftsmanship during this period. The lathe is particularly notable for its association with the Briggs Brass Foundry. The foundry was known for developing a specialised brass alloy composed of non-ferrous metals, a formulation that resulted in durable products built to withstand the demanding conditions of marine environments. This focus on resilience and longevity made Briggs Brass Foundry’s goods highly sought after within the maritime sector. Briggs Maine, a long-established business, utilised the foundry’s capabilities to create cast goods tailored to the needs of the marine industry. The facility was equipped to deliver both custom-designed and mass-produced items, ensuring versatility in meeting various requirements. Many of Briggs Foundry’s products found their place on sailing and steam vessels throughout Victoria’s coastline, including in the port town of Warrnambool, where there was once a brancy of Briggs Marine. In addition to general marine fittings, Briggs Marine earned recognition for its expertise in bell-founding. The foundry’s reputation is closely linked to the restoration of the Schomberg Bell at Flagstaff Hill, a small but historically significant bell from a luxury migrant vessel dating back to the mid-19th century. The successful restoration of the Schomberg Bell demonstrates Briggs Brass Foundry’s commitment to preserving craftsmanship and maritime heritage.The lathe is a green, bench-type, steam-powered woodworking machine. Its bench is supported by decorative posts at each end, with each post dividing into arched legs. The lathe is mechanically connected to both a pulley and a flywheel, designed to be operated in conjunction with a steam engine. Included with the lathe is a range of accessories. Across the front of the machine, an inscription is cast, and a stamped, metal lathe pulley guide is attached to the drive mechanism. The lathe was manufactured by W. F. and J. Barnes, Rockford, Illinois, USA, during the 1900s.“W F and J Barnes, Rockford, USA” "1820" "1887"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, lathe, steam-operated lathe, steam-operated pulley, steam power, steam engine, machine, steam operated machine, metal work, foundry work, metal working trade, tool, pulley driven, metalworking, woodworking, barnes lathe, briggs marine, belt driven, wordworking lathe, free standing lathe, bench lathe, steam powered, vintage lathe, woodturning lathe, w. f. and j. barnes, illanois, early 20th century, briggs, briggs brass foundry, briggs marine foundry, briggs marine products, herbert harrison briggs, george edward briggs, cyril falkiner mckinnon briggs, collingwood, moorabbin, frank lee, les lee, eva lee, briggs marine warrnambool, non-ferrous founders, bell specialists, ship bell specialists, sand cast, marine equipment, marine fittings, foundry, brass foundry, founders

The Edison Fireside Phonograph Combination Type A model phonograph was an open horn model. This machine was produced around 1909, just after the introduction of 4-minute record cylinders in 1908.; the selection lever on the front was either 4 or 2-minute choice. This Fireside model has a fluted octagonal horn that attaches to the reproducer on the machine and is suspended by on ring by a horn crane attachment. The phonograph machine is powered purely by mechanical means, winding the crank handle on the side of the machine to start the belt-driven, spring-loaded motor inside. The sound comes from a pre-recorded, vertical cut record cylinder, which slides over the Mandle, a smooth rotating drum. The reproducer, an all-in-one needle, amplifier and speaker, is lowered onto the cylinder, the needle picks up the sound and plays it on the speaker and the attached horn amplifies the sound. The phonograph machine was invented by Thomas Alva Edison in the late 19th century. Edison adopted the idea from the technology of the telegraph machine. He patented the phonograph in early 1878. It was able to record sound and play it back. This amazing invention opened up a whole new world of entertainment, where wax cylinders of pre-recorded sound could be purchased with a wide variety of music and played over and over. The first wax cylinders were white and used a combination of bees' wax and animal fax or tallow. By 1892 Edison was using 'brown wax' cylinders that ranged from cream through to dark brown. The Edison Phonograph Company was formed in 1887 to produce these machines. He sold the company in 1855 to the North American Phonograph Company but bought that company in 1890. He then started the Edison Spring Motor factory in 1895, and the National Phonograph Company in 1896. In 1910 the company became Thomas A. Edison Inc. In 1898 Edison produced the Edison Standard Phonograph, the first phonograph to carry his own trade mark. He began mass producing duplicate copies of his wax cylinders in 1901 using moulds instead of engraving the cylinders. The wax was black and harder than the brown wax. The ends of the cylinders were bevelled so that the title's label could be added. The last phonograph machine to use an external open horn was produced in 1912 due to the much more robust round records being invented. In 1913 Edison started producing the Edison Disc Phonograph. The company stopped trading in 1929.This Edison Fireside Phonograph model is significant for being one of the last models to have an external horn. It is also significant for its connection with the invention of the phonograph, which made music and sound available for domestic enjoyment. It was used for entertainment and education, even teaching languages. It signalled a new era of music that could be reproduced and played anywhere. It is also significant for its short time span of popularity, just a few decades, due to the growing use of records, which gave a much higher quality sound and were more robust.Phonograph; Edison Fireside Phonograph, Combination Type, Model A. It is in a wooden case with a domed lid, metal catches on each side and a folding wooden handle. It has a metal drum and a reproducer mechanism. The metal and wood crank handle starts the machine’s motor. A sliding lever at the front selects the speed for four- or two-minute cylinders. The inscribed plate has the maker, serial number, patents and other information. The reproducer also has an inscription. It has a curved metal open horn attachment. Made in Orange, New Jersey in c.1909. NOTE: the fluted octagonal horn is catalogued separately.Case front, in script, Edison’s early ‘banner’ decal “Edison” On the front of the machine “Thomas A Edison TRADE MARK” On the maker’s plate; "Edison Fireside Phonograph Combination Type" Serial number “14718” Around sound outlet; “C 4076” “REPRODUCER LICENCED FOR USE ONLY ON EDISON PHOTOGRAPHS SOLD BYT.A. EDISON INC.” At the front edge “4 MINUTES 2flagstaff hill, maritime museum, maritime village, warrnambool, great ocean road, shipwreck coast, gramophone, phonograph, music player, entertainment, audio equipment, edison, thomas a edison, horn, phonograph horn, amplifier, audio, sound recording, sound playback, phonograph machine, phonograph cylinder, external horn, edison phonograph company, wax cylinders, sound reproduction, edison spring motor factory, national phonograph company, thomas a. edison inc, crank-operated motor, open horn phonograph, 4 speed, 2 speed

The image of Ballarat Trustees relates to a building on the corner of Mair and Lydiard Streets. In 2010 it was used as Cuthberts law firm.Grey/green soft covered book. Includes photographs and map. Themes include: Ballarat History pre gold, mining, Eureka Stockade, Lake Wendouree, South Street, Grand National Eisteddfod of Australasia, schools, Black Hill, Lake Burrumbeet, Creswick, Buninyong. Illustrations and advertisement include: Sturt Street,James Smith, Ballarat Town Hall, Ballarat East Town Hall, Rowlands, Ballarat brewing Co., Royal Standard Brewery, steam train, Lake Wendouree, J.S. Vickery & Son, trout, Berry, Anderson & co., Ballarat Botanical Gardens and hot houses, Claxton Memorial Fountain, statues, New Imperial Gold Mine, Art Gallery of Ballarat, St Patrick's College, Ballarat Grammar School, Ballarat School of Mines, Ballarat College, Sunnyside Woollen Mills, Ballarat Agricultural High School, Passenger Steamer on Lake Wendouree, Moorabool Falls, Lal Lal Falls, Grosvenor Square, Netherby, Buninyong, Ballarat Motor Garage.ballarat, cuthberts, ballarat trustees, sturt street, tram, trams, ballarat town hall, crag's hotel, sun foundry, eureka aerated waters and brewing co, d. lem, chinese practioner, chinese herbalist, hugh v. mckay, sunshine harvester, gordon brothers, central business college, george hotel, edwards pyrites furnace, long's biscuits, ballarat eisteddfod, george farmer, ballarat botanical gardens, eureka stockade, lake wendouree, ballarat school of mines, moorabool falls, kirks reservoir, ballarat post office, hepburn lagoon, star of the east mine, emu river, ballarat observatory, statues, angus' rialto cafe, carlyon's hotel, clarendon ladies' college, j.e, sang, ballarat coffee palace, stansfield and smith, ballaray brewing company, phoenix brewery, rotal standard brewery, john macleod co, robert sim and co, cobb and co\eagle foundry, j.j. goller and co., mt buninyong lookout, ballarat town hall ballarat east gardens, hot house, glass house, statuary pavilion new imperial gold mining co.,, art gallery of ballarat, st patrick's college, ballarat agricultural high school, lake wendouree steamer, grass trees at mt clear, mount clear, lake burrumbeet, newlyn reservoir trout, lal lal falls, grosvenor square, netherby, ramelli's motor garage, buninyong gold obelisk, memorial, imperial gold mine, botanical gardens lily pond and fernery

Purple soft covered booklet of 102 pages. Includes numerous advertisements and black and white illustrations. Topics include: Ballarat history, Eureka, Railway facilities, Railway fares to Ballarat, Lake Wendouree, Ballarat Botanical Gardens, Ballarat Zoological gardens, Ballarat Statues, Ballarat Mines and Mining, Illustrations include: Ballarat Brewing Company, passenger steamer on Lake Wendouree, Provincial hotel, Eureka Lead, Lydiard Street, Sturt Street, Ballarat Town Hall, Ballarat East Town Hall, Sunnyside Woollen Mills, Fairyland, Loch Leven Trout caught in Lake Wendouree, Ballarat Botanical Gardens, Boer War Monument, New Imperial Gold Mine, South Street Competitions, Art Gallery of Ballarat, Ballarat School of Mines, Ballarat Grammar School, Ballarat College, St Patrick's College, Ballarat Agricultural High School, Mt Clear flowering grass trees (Xanthorea Australis), Eureka Stockade Monument, Ballarat YMCA, Lake Burrumbeet, Bo-peep Creek, Moorabool Falls, Lal Lal Falls Advertisements include: Ronaldson bros. and Tippett, Charles Morris undertaker, James Smith, Huttons the jewellers, Allchin Bros, Wallace Butter Factory, F.W. Barnes and Son, Berry, Anderson and Co., Rowlandsballarat, new imperial gmc, sunnyside woollen mill, brewery, royal standard brewery, st patrick's college ballarat, ballarat grammar school, ballarat school of mines, ballarat east town hall, ballarat east botanical gardens, abc grill & tea room, a.m. palmer chemist, thomas' supply stores, ballarat brewing company, stevens the furriers, summerscales, paddlesteamer on lake wendouree, hutton's the jewellers, allchin brothers, fiat motor garage, eureka stockade, w. cornell, cornell's liver pills, f.w. barnes and son, w. rotchie's, railway, lake wendouree, w.f. coltman, bert skinner, frank besemere, fred a. reed, ballarat zoological gardens, jelbarts, brinds, rowlands soda water, american club hotel, armstrong street south, ballarat woollen mill, southern cross hotel

This list of factories in the City of Sunshine is an extract from a report by City of Sunshine in 1962.This report records the business name, type of industry and address of businesses operating in the City of Sunshine in 1962.Factory Name or Occupier A.C. Stebbing A.E. Davies A.F. & J.A. Dawes A.G. & N. Pennell A.G. Spalding Bros (A'sia) Pty Ltd A.H. Corral & H. Reeves A.R.C. Engineering Company Pty Ltd A.V. Homes Albert G. Sims Ltd Albert G. Sims Ltd Albion Quarrying Company Pty Ltd Albion Timber Company Alfred George Black Alliance Printing Company Amsterdamer, Mark & Isabella Andrew W. Rea Antonio Koumis Armstrong York Engineering Pty Ltd Associated Rubber Company Pty Ltd Austral Bronze Company Pty Ltd Austral Standard Cables Pty Ltd B.A. Martin Baker & Taylor Pty Ltd Barnard Bros. Pty Ltd Bethell & Bradley Bill's Transport Services Pty Ltd Birmbaun Fairwell & Richter, Morka (Occ B. & R. Company) Boonspa Pty Ltd British Australia Carpet Manufacturing Company Brooklea Timber Company Brooklyn Motor Springs Works Broons Containers Ltd Broons Timber Pty Ltd C. & L.A. Dunt Letcher & Hartley C. Wolfenden & Company C.J.T. Niven Pty Ltd C.T. Wimble & Co. Pty Ltd C.V. Trowbridge Caluzzi, L. Canada Cycle & Motor Company Pty Ltd Canterbury, C.W. Connor Shea & Company Pty Ltd Consilated Bearing Company Pty Ltd Consolidated Metal Products Co-Operative Farmers & Graziers (Direct Meat Supply Ltd) Corrougated Fibre Container Pty Ltd Crittall Manufacturing Company Crittall Manufacturing Company Crocuher & Sharpe Currie Furniture Manufacturing Company D. Pavlovic D. Richardson & Sons Pty Ltd D. Ure D.J. & J. Bingham Dalco Pty Ltd Dalgety's Properties (Vic) Pty Ltd Dalgety's Stores Pty Ltd Darmas Welding Engineers Digby Leonard Stanley Dixon & Co. Pty Ltd Dover Machine Tools Pty Ltd Dycraft Ltd E. & F. Industries Pty Ltd E.G. Hallett E.J. Andrew E.N. Gordon Ecole Pty Ltd Edward Campbell & Son Pty Ltd ETA Foods Pty Ltd ETA Foods Pty Ltd Eunson & Bosse Everlast Steel Products Exors F.H. & L.G. Gilbert Estate Express Holdings Ltd Extruded Metals Pty Ltd Extruded Metals Pty Ltd F. Watkins Pty Ltd F. Watkins Snr. F.J. Clements F.J. Humphrey Fairway Scale & Tube Pty Ltd Ferron Industries Ficken Haliday & McClelland Pty Ltd Fletcher Chemical Company Franklin Press Frederick Heaviside Frederick Heaviside Frederick R. Marsh G. & F. Hortin G. Vargiu G. Wills & Co. Ltd G.Harris Builders Pty Ltd G.R. & L.M. Wilson George A. Backhouse Go Kart Manufacturing Company (Aust) Pty Ltd Guy Bros. Pty Ltd H. Hartley & J. White H.J. & D.J. Scoble H.J. Drayton Harland Engineering (Aust) Pty Ltd Harold Meggitt Ltd Harrison, L. Harvey-Little, E.J. Haxby Bros. Herlihy Bros. Hills & Mason Humes Ltd I. & P. Panel (K. Flack Tenant) I.H. Blacker Industrial Oxygen Company Pty Ltd Industrial Service Engineering J. & E. Montomery J. & O.E. Turnley J. Adler (National Springs) J. Adler (Owner) J. Flint J. Walker J.A. Lewis J.A. Short (Owner) Steel Craft Baby Cariages Pty Ltd J.A. Taylor J.A. Watson J.F. Lane J.H. Hutson J.H. Moffitt & N.D. McLean Norsun Motors J.H. Ralph J.H. Ryan J.H. Steel J.H. Story J.H. Warnock J.J. & D.M. Allan J.M. & A.L. Scanlon J.R. Parsons J.T. & A.W. Carter J.T. Carter James Herbert Sharp James Michael & E. Montgomery John Charles Duxson John Darling & Son Pty Ltd K. & B. Chapman K.M. Steel Products K.W. Thomas (Melb) Pty Ltd Kleins Holdings Ltd Kreglinger (Aust) Pty Ltd L. Baldwin L.E. Poole L.H. Plastersheet Manufacturing Company Pty Ltd L.H. Tonkin L.T. Cody Lanz Aust Pty Ltd Lenmax Constructions Pty Ltd Leroc Oil Company Pty Ltd Leslie John Guy Liquid Cartage Company Pty Ltd Lustre Cleaning M. & C. Gatt M. Dawydiuk Maidstone Ice Works Maidstone Plaster Company Maribyrnong Timber & Trucking Company Pty Ltd Marriott Heat Treatment Massey Ferguson Pty Ltd McPherson's Limited Mees. Nederlof Meggitt Limited Melon Investments Pty Ltd (Invicta Mills Pty Ltd) Mephalene Pty Ltd Mephan Ferguson Pty Ltd Metal Manufacturers Ltd Mills Scaffolds Mills, Robgrae Polishing Company Mobile Concrete Constructions Company Pty Ltd Monier Pipe Company Pty Ltd Monsanto Australia Pty Ltd Moorabbin Sand Pits Pty Ltd Morris McMahon Mr. Sneddon N.W. Riley National Forge Company National Motors Springs (Vic) Pty Ltd Nelson Nettlefold Pty Ltd Nilo Industries Pty Ltd Nobel A/sia Pty Lrd Norman Smorgan & Sons Pty Ltd Olympic Cables Pty Ltd Olympic Tyre & Rubber Company Pty Ltd Oversea Corporation (Aust) Ltd P. Sztogryn P.T. Cooper Pelaco Ltd Perfect Circle (Aust) Pty Ltd Perfect Trading Company Peter Mochrie Phoenix Foreworks Company Pty Ltd Polson Motor Parts Company Pty Ltd Prism Paints R. Popp & Z. Stepanek R. Simpson R.A.G. Kent R.G. & D. Mattinson R.J. & D.G. Layton R.M.D. Press Company Pty Ltd R.M.D. Press Company Pty Ltd Ralph McKay Ready Mix Concrete Victoria Pty Ltd Regal Quarries Pty Ltd Rheem Manufacturing Company (Aust) Pty Ltd Richard Williams Yeomans Richard, E. Robert Bodington Pty Ltd Rothmans of Pall Mall (Aust) Ltd Roy Francis Wood Rubbertex (Aust) Pty Ltd S. & G. Barlow S.M. Peters Sandhurst Estates Pty Ltd Sankey Benson Wheels Seabridge, William Alexander Selleys Chemical Manufacturer Company Pty Ltd Seven X Beverages Pty Ltd Sidney Cooke Pty Ltd Silicate & Dolmite Pty Ltd of Australia Smith Bros. Pty Ltd Smithwelds Pty Ltd Sonneham Southern Cross Windmills & Engines Standard Steel Company Pty Ltd Stanfield Steel Company Stanger Power Equipment Pty Ltd Stanley Quarries Pty Ltd Steedman, Ian Knollys Steel Improvements Company Pty Lrd Steelbilt (Vic) Pty Ltd Steels & Metals Pty Ltd Steelweld Pty Ltd Stramit Board Pty Ltd Sunbeam Corporation Ltd Sunshine Cabinet Works Sunshine Extrusion Die Sunshine Primary Exports Pty Ltd Sunshine Vitreous Enamellers Pty Ltd Sunshine Waste Company (Kagan Bros. Pty Ltd) Sunshine Waste Industries Swanston Engineering Pty Ltd T. & L. Cockram Pty Ltd T. O'Hare T. Zafis Tallamy & Marriott (Occ McPherson, Duncan Alexander) Taubans Group Factories Pty Ltd The Australian Wool Bureau The Lysaght Durham Chemical Company Pty Ltd Thomas Borthwick & Son (A'sia) Ltd Thomas Joseph Donohoe Thomas Walsh & Company Pty Ltd Tip Top Cordials Pty Ltd Tobin K. Wm. & V.M. Tyler Bros. Una Timber Industries Pty Ltd Unit Fabrications Pty Ltd (Occ. Didier, L.C.J.) V. Manhavac Vacu-Lug (N.S.W.) Pty Ltd Valentine Smith Victorian Steel Fabrications Vickers-Detroit Hydraulics Pty Ltd Victoria Road Pty Ltd Victorian Casing Company Pty Ltd Victorian Meter Laboratory Victorian Steel Fabrication Pty Ltd W. Janus & L. Taylor W. Pridham Pty Ltd W.G. Sullivan W.H. Dunham W.L. Allen Foundry Company W.M. Bruns W.T. Stembridge Wilcox Mofflin Ltd William Adams & Company Ltd William Atkins (Vic) Pty Ltd William Whitely & Sons (Aust) Pty Ltd Wiltshire File Company Wunderich - Humes Asbestos Pipes Pty Ltd Wunderich Ltd Zinc Oxide (Aust) Pty Ltd

Fordson Henry Ford set up the company Ford and Son in 1917, it later became known as Fordson. Henry had previously tried to interest the directors of the Ford Motor Co in producing agricultural machinery, but when this met with no success he set up the new company to market the tractor he had created. Fordson: Model N 1929-32 Produced at Cork 1932-1945 Produced at Dagenham The Fordson Model N replaced the Fordson Model F. Production of the Model N started in Cork in 1929. Production of the Fordson Model N was transferred from Cork to Dagenham in 1932. The Model N featured a 27 HP engine, standard rear fenders (mudguards), a higher voltage ignition system, and optional pneumatic tires. In 1935 power take-off (PTO) was available as an option on the Model N. Historic - Farm Machinery - TractorSteel Tractor - Orange with black wheels.Fordsonpuffing billy, fordson, tractor

Set of nine Engineering standards that were acquired by ESCo during the 1920's. 2261.1 - British Engineering Standards Assoc. No. 101 - 1921, titled "British Standard Specification for Tramway Tyres" dated July 1921. 12pp + printed cover and a folded tip in sheet printed as plate 1, date stamped ESCo 14 Sep. 1923 - 216H x 141W, with "Tait Book Co. 90 William St. Melbourne" stamp on front cover. Light blue grey cover, with off white paper inside. Saddle stapled, rounded corners. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. See image 2261i1 for front cover. Publisher - Crosby Lockwood and Son London UK. - see images btm2261i1 and i2 for scans of the document. 2261.2 - British Engineering Standards Assoc. No. 2 - 1922, titled "British Standard Specification and Sections for Tramway Rails and Fishplates" dated March 1922. 56pp including cover, actual pages 35 - 50 are fold out sheets for plates 1 to 8 with rail sections detailed, date stamped ESCo 8 Jun 1926 - 216H x 142W, with "Tait Book Co. 90 William St. Melbourne" stamp on front cover. Light blue grey cover, with off white paper inside. Saddle stapled, rounded corners. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. Publisher - Crosby Lockwood and Son London UK. See image btm2261i3.pdf and i4.pdf 2261.3 -Australian Commonwealth Engineering Standards Association, Standard No. E 1a - 1926T - "Tentative Australian Standard Specifications for Railway Permanent Way Material", dated May 1926. 32pp plus cover, date stamped by ESCo 14 June 1926 - 229H x 157W saddle stapled. Grey cover with off white paper inside. Printed by The Australasian Medical Publishing Company Limited. See image 2261i2 for front cover. Publisher - The Association Sydney, Australia. See images i6 and i7 for a pdf scan of this document. 2261.4 - British Engineering Standards Assoc. No. 2 - 1927, proof issue, titled "British Standard Specification and sections for Tramway Rails and Fishplates" dated 1927. 56pp including cover, actual pages 35 - 50 are fold out sheets for plates 1 to 8, date stamped ESCo 16 Jul 1927 - 216H x 142W. Off white paper covers and text. Saddle stapled, rounded corners. Has "Waterlow" name on front cover bottom right hand corner. 2261.5 - Australian Commonwealth Engineering Standards Association, Standard No. C. 30 -1926T - "Tentative Australian Standard Specification for Drum Controllers and Resistances for use therewith for electric motors (DC and AC slip ring, excluding controllers for traction purposes", dated December 1926. 28pp plus cover, date stamped by ESCo 29 Jun 1927 - 227H x 152W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.6 - Australian Commonwealth Engineering Standards Association, Standard No. C 33 - 1926T - "Tentative Australian Standard Specifications for Drum Starters for electric motors", dated December 1926. 28pp plus cover, date stamped by ESCo 29 June 1927 - 227H x 153W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.7 - Australian Commonwealth Engineering Standards Association, Standard No. E 13 to 15 1927 T - "Tentative Australian Standard Specifications for Railway Rolling Stock Material, locomotive tyres, carriage wagon and tender tyres, weldless steel angle rings", dated August 1927. 32pp plus cover, date stamped by ESCo 15 Sep 1927 - 228H x 153W. Grey cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.8 - Australian Commonwealth Engineering Standards Association, Standard No. E 22 to 29 1928 - "Australian Standard Specifications for Railway Permanent Way Material", dated January 1928. 64pp plus cover, date stamped by ESCo, but not readable - 228H x 153W. Light purple cover with off white paper inside, saddle stapled. Printed by The Australasian Medical Publishing Company Limited. Publisher - The Association Sydney, Australia. 2261.9 - British Engineering Standards Assoc. No. 101 - 1929, titled "British Standard Specification for Tramway Tyres" dated February 1929. 16pp +cover, pages 13 and 14 are foldout plate 1, held together with sewn thread, - 218H x 142W, with "J. Ewins & Sons, Booksellers and Stationers Ballarat" label on front cover. Light blue grey cover, with off white paper inside. Printed by Waterlow & Sons Limited, 49 Parliament Street Westminster SW1. Publisher - Crosby Lockwood and Son London UK. Yields information about British Tramway Standards which were used on Australian and New Zealand Tramways.Set of nine printed books, centre stapled. trams, tramways, standards, tramway equipment, tyres, permanent way, track materials, electric motors, esco

This artefact originates from a petroleum company which operated in Victoria from 1933 until 1945. The Alba Petroleum Company of Australia Pty. Ltd. was established by P. J. Adams and A.G. Wales. They had distribution facilities in the industrial estate of Newport in Victoria and also marketed to South Australia and Tasmania. Their advertising during World War 11 emphasised the need to keep petrol profits in Australia. They claimed to have the largest independent bulk storage unit in Australia. They pioneered the use of tar alcohol which was blended with "standard motor spirit to produce a super fuel. They were marketers of ALBA Super, the Aviation Quality Spirit containing Australian produced alcohol, ALBA motor spirit, ALBA power kerosene and ALBALITE lighting kerosene. In 1945 after the war ended, ALBA was incorporated with the Australian Motorists Petrol Company, which in turn, became AMPOL Petroleum Ltd in 1949.This artefact is representative of an Australian innovative company and a product which was widely used on a local, state and national level for industrial and domestic applications.A cylindrical steel/metal can for petrol storage and transfer. It has the brand name of the company ALBA embossed into the lid.On lid: " ALBA"alba petroleum company, ampol, petroleum companies australia

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of a Model Dairy Truck emerging onto Kent Street, Kew.the model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of a Model Dairy Truck emerging onto Kent Street, Kew.the model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of a Model Dairy Truck emerging onto Kent Street, Kew.the model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of a Model Dairy Truck emerging onto Kent Street, Kew.the model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of a Model Dairy Truck parked in Kent Street, Kew.the model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of a Model Dairy Truck parked in Kent Street, Kew.the model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of two Model Dairy Trucks in Kent Street, Kew. Barenya Court and Cotham Shopping Centre in distancethe model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Original black and white photographic positive of Model Dairy Trucks in Kent Street, Kew. Barenya Court and Cotham Shopping Centre in distancethe model dairy pty ltd, the model dairy co, john simonton, james venn morgan, john tanner, cotham road, kent street, ridgeway avenue, bates smart & mccutcheon, dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Digital copy of a business card advertising the Model Dairy in Belmont Avenue, Kew, managed by John Simonton. (The card was donated by John Harvey Simonton in 2021,)"Milk delivered fresh twice daily in / Kew, Hawthorn & Camberwell / All Milk guaranteed free from chemicals, used either to preserve or colour it / Our butter (Model Dairy Brand) / I Manufactured from Pure Cream by the most improved Machinery / [DRAWING] The Model Dairy Co Belmont Avenue Kew / Model Dairy Co / Belmont Avenue, Kew / John Simonton, Manager"model dairy -- kew (vic.), john simonton, belmont avenue -- kew (vic.), dairies -- kew (vic.)

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Digital copy of the front side of an invoice, for week ending 22 June 1907 by John Simonton of the Model Dairy in Belmont Avenue to Watson for delivery of 17 bottles of milk on six occasions during the week . A drawing of the Model Dairy is printed at the top of the invoice. (The card was donated by John Harvey Simonton in 2021,)"[To M] Watson" / "Paid A Simonton 26/6.07"model dairy -- kew (vic.), john simonton, belmont avenue -- kew (vic.), dairies -- kew (vic.), invoices

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Rare silver plate salver commemorating one of Kew's most famous businesses. The salver is one of a pair, identically engraved with Model Dairy 1963-1963.Hecworth reproduction old sheffield plate salver with foliate edge on three feet, with impressed maker mark on reverse rim and engraved with the words 'Model Dairy 1963-1963' in the centre of the reverse. "Heckworth Plate was made by Platers Pty Ltd at 39 Greeves St, St Kilda, Melbourne, Victoria. Platers introduced 'Hecworth' Sheffield Reproduction Silverware in 1940 and in 1946 'Hecworth' was acquired by Rodd Pty Ltd." (MAAS)MODEL DAIRY 1863 - 1963model dairy -- kew (vic.), commemorative silver, john tanner, tanner family

This well-known Kew business, which would become known as The Model Dairy, was founded in 1863 by James Venn Morgan. Morgan sold the company in the 1890s to John Simonton who renamed the business The Model Dairy Co. Simonton had experience in the local dairying industry having previously leased the Willsmere Park Dairy. He moved the business to Belmont Avenue in c.1899. In 1924, following his retirement, the company expanded to become The Model Dairy Pty Ltd with Arnold Thompson Simonton and John Tanner as its owner/directors. With new techniques and processes such a pasteurisation, the Belmont Avenue site no longer met required standards for processing and bottling, so its operations moved to 191 Cotham Road. The company celebrated its centenary in 1963. A new factory, built in 1959 to a design by Bates, Smart & McCutcheon, was purchased by Bib Stillwell Motors after the dairy closed. The entire site has since been redeveloped.Rare silver plate salver commemorating one of Kew's most famous businesses. The salver is one of a pair, identically engraved with Model Dairy 1963-1963.Hecworth reproduction old sheffield plate salver with foliate edge on three feet, with impressed maker mark on reverse rim and engraved with the words 'Model Dairy 1963-1963' in the centre of the reverse. "Heckworth Plate was made by Platers Pty Ltd at 39 Greeves St, St Kilda, Melbourne, Victoria. Platers introduced 'Hecworth' Sheffield Reproduction Silverware in 1940 and in 1946 'Hecworth' was acquired by Rodd Pty Ltd." (MAAS)MODEL DAIRY 1863 - 1963model dairy -- kew (vic.), commemorative silver, john tanner, tanner family