Group of workmen. Cathedral Rock where the work commencedstart of construction, great ocrean road. cathedral rock

Colour photographWritten on back of photo: "19/2/95-Start of Bypass Looking West from Suda Av"

Colour photographWritten on back of photo: "19/2/95-Start of Bypass Looking East"

Colour photographWritten on back of photo: "19/2/95-Start of Bypass Looking East from Warrandyte Rd"

Colour photographWritten on back of photo: "19/2/95-Start of Bypass Looking West from Warrandyte Rd"

Coloured photograph looking from Schwerkolt Cottage across Deep Creek Road to start of construction of new Bridge.deep creek road, mitcham

Coloured photograph looking from footpath East side of Deep Creek Road at start of construction of new Bridge.deep creek road, mitcham

Coloured photograph looking East from Deep Creek Road Bridge at start of construction of new Deep Creek Road Bridge.deep creek road, mitcham, vicroads

Ron Setford and his wife Grace Setford lived in Tanner Avenue, East Kew, from c.1946 to c.1995. A keen photographer, he recorded the changing face of Kew over a 20 year period. Apart from 30 photographs of built structures and places in Kew dating from 1960 and 1961, 145 of his 35mm colour slides chronicle the development of the F19 (later renamed Eastern) Freeway through the Yarra Valley in Kew over a five year period from c.1972 to c.1977. This important collection was donated to the Society by his granddaughter in 2025.This collection of 175 35mm slides is of local and statewide significance, owing to its subject matter, particularly the major development of road transport infrastructure during the 1970s with the construction of the Eastern Freeway. The photographer also took care to annotate and date most of his slides which enable the researcher to pinpoint temporal and spatial locations.View of a sign stating the start date of construction on the Eastern (F19) Freeway"Title slide / Eastern Freeway"ron setford, eastern freeway, f19 freeway

The half model is the traditional way for boat-builders to shape a boat before starting construction.Half model of fishing boat mounted on backing board

Original and carbon copy of "Extracts from the Minutes of the Prahran and Malvern Tramways Trust which was constituted under Act of Parliament No. 21030 in 1907", 10 foolscap sheets. Includes depot purchase, regrading of High St, extension to Burke Road, relocation of water mains, surveys, starting of construction, tenders for track and buildings, opening, extension, F. A. McCarty & Co., Dandenong Road lines, railway bridges, extension of High St to St Kilda Road, MMBW, finances. Items 2041 to 2052 within box 72.3 in a brown folder marked "PMTT" in red pencil.trams, tramways, pmtt, malvern, routes, track, surveys, malvern rd, tenders, construction, opening, dandenong rd, mmbw, finances

Handwritten anonymous notes, possibly 1971, headed "Ask Alec" and identifying information the writer needed such as 'Present state of the project'. There is no indication of what the project was beyond dates for the acceptance of tenders, start of construction and date of completion etc. Appears to be part of the review of the residences done at that time. When ideas for renovating and upgrading one of the homes was being considered. Apparently building would start in March 1972 and be completed before the end of 1972. There is no record of a Legatee called 'Alec' at the appropriate time in Melbourne Legacy records.Part of the history of Melbourne Legacy's involvement with residential care for children.2 pencilled foolscap sheets, black on discoloured white. Two holes punched for filing. residences, review

Showing streetscape in the late 1990s. Roundabout construction started in 1987Showing streetscape in the late 1990s.Black and white photograph of roundabout at intersection of Learmonth and Warrenheip Streets Buninyong. Background RSL Hall and Memorial gardens and Gates, Masonic Centrestreetscape, buninyong, rsl memorial gardens, rsl hall, masonic centre

A building contract for the Nunawading Community Hub is expected to be signed in September & construction started before the end of the year. Council bought the former school site in 2015.A building contract for the Nunawading Community Hub is expected to be signed in September & construction started before the end of the year. Council bought the former school site in 2015.nunawading community hub, nunawading primary school no. 4190, city of whitehorse

Yields information about the history of tramway operations in Ballarat and Bendigo through looking at the past from cuttings in newspapers - The Courier.Newspaper clippings inside the rear cover and Second last page - possibly from an "introspect" or looking at the past from The Ballarat Courier, c1938. - Ballaarat Tramway company asking the City of Ballarat to reduce the rent and different fares. - Battery trams in East Ballarat - "Hopes that failed" - Electric Trams - Ballarat Service began in 1905 - notes a reference to the SEC operations. - Electricity Commission in Ballarat and its tram and power supply to the country - dated 1938 - tramway operations in Bendigo (Sandhurst to Eaglehawk) - resolving issues between the City of Ballarat and the Ballaarat Tramway Co. - Licensing of horse tram drivers in Ballarat. - start of construction of the horse trams in Ballarat - destruction of the horse tram depot by fire in Sebastopol - Demonstration of the Julien Battery tramcar in Drummond St. - Operation of trams in Flinders St at night and problems with homeless people sleeping near the tracks. Contained within Reg Item 5485 - Service Exercise Book, black covers, with label, red binding titled "No. 2 - Ballarat Tramways & S.E.C. Systems". bendigo, ballarat, cable trams, battery trams, steam trams, sec, esco

The Cambridge Glass Company was chartered in 1873 by a group of Cambridge, Ohio businessmen. But it was not until 1899, when the site was purchased by the newly formed National Glass Company, that funds became available to start the construction of this new glass factory. n 1901, The Cambridge Glass Company was organized by the owners of the National Glass Company of Pennsylvania Arthur J. Bennett, a native of England, was hired to manage this new factory. Having experience in the china and glass trades. Many of the patterns were of Mr. Bennett's own design. Sometime around 1903-1904 the company's first trademark came into being, the words "Near Cut" pressed into the glass. Cambridge Glass soon became known worldwide for quality in both "crystal and colours, pressed and blown’. 1984. The National Cambridge Collectors purchased many of the moulds, all of the etching/decorating plates and other assets of Cambridge Glass from Imperial. The Cambridge Glass factory building was demolished in 1989A shallow factory made, frosted green glass vase. The central "frog" is a figurine in the shape of a draped lady, with ten holes at her base to hold flowers. The lady's shape is poorly moulded, indistinct and would have been cheaply made. No Makers Mark. Appears to be similar to vases made by Cambridge Glass Co, Ohio, America, (1901 - 1958), during the Depression. glassware, cambridge glass company, ohio, bennett arthur j., orme wilber l., national glass company, pennsylvania, imperial glass company, bellaire, pioneers, early settlers, herron john, bentleigh, market gardeners, moorabbin, cheltenham

A start on the construction of Bogong Creek race line was made at the commencement of winter in 1948. Work proceeded in the following years when work on the High Plains was not practicable. In January, 1951 the special trimming machine, the special slip form and concrete mixing and placing equipment was put into service. A shortage of cement caused some delays as well as a sudden financial recession. The race line was completed and put into service in 1952.An historical record showing the machinery used during this time, the number of workers and supervisors involved and the mountainous terrain where they worked. It also demonstrates the OH&S of the period with workers mostly in street clothing with no hard hats or other safety equipment. Several workers can be seen working shirtless or in singlets.Photocopy of a black and white SECV photograph No: K 6209 labelled Bogong Creek Race Line ch. 1700. Depicting large group of workers and supervisors working at the site. Dated 17/1/52Printed underneath the photograph: STATE ELECTRICITY COMMISSION OF VICTORIA Date: 17/1/51 Time: 10.30am No: K 6209 Kiewa Hydro-Electric Works Bogong Creek Race Line ch. 1700 bogong creek raceline; secv; kiewa hydro electric scheme;

A start on the construction of Bogong Creek race line was made at the commencement of winter in 1948. Work proceeded in the following years when work on the High Plains was not practicable. In January, 1951 the special trimming machine, the special slip form and concrete mixing and placing equipment was put into service. A shortage of cement caused some delays as well as a sudden financial recession. The race line was completed and put into service in 1952. An historical record showing the machinery used , the number of workers needed at any one time ( about 16 in this photo) and the mountainous terrain of the area. Black and white photograph taken during construction of Bogong Creek Raceline, showing the type of machine used for the formation of the concrete lining, the mountainous terrain, a number of workmen and a snow capped Mt. Bogong in the backgroundHandwritten on the back of photograph in black ink "Bogong Creek race line".race line, cement, machinery, bogong

The Bogong Township (circa 1930s) was constructed by The State Electricity Commission of Victoria as a base camp for construction workers under the Kiewa Hydroelectric Scheme starting in 1938. The Scheme employed 4000 men during its construction phase. A small number were first housed at Bogong Village and when required the Mount Beauty Township was established(1949). Construction at the dams and Power Stations was interrupted during World War II. June 1951 started construction at full pace. The Bogong Township was developed firstly as an accommodation centre (base camp) for construction workers employed under the Kiewa Hydroelectric Scheme. Due to the influx of European workers into the Township the beautification of the immediate surrounds(gardens etc.) had a distinct European flavour. This environment has been very beneficial for tourism in later years. Strict environmental control has not allowed for any extensive redevelopment in tourist accommodation and basically restricted it to the accommodation initially built for the construction workers. Activities such a bike riding, snow skiing, restricted horse riding and bush walking on the Alpine plains and mountains are now a viable part of the Kiewa Valley Tourist Industry.Scanned copy of original black and white photo. Paper manufacturer is Kodak. Paper is Kodak XtraLife II.On reverse side "Kodak ExtaLife II paper"bogong village, bogong township, sec alpine constructions, victorian alpine tourism, winter sports.

Sydney Sunday Herald article titled "Two old trams can make a home" features of 25/6/1950, page 2 of 16 has article on re-using Sydney tram cars as the basis for houses, includes 3 photos, mentions housing shortage, page 8 has feature on start of NSW Rail construction (1850) and photo of NSW steam locos includes many as and articles of the time. Record updated and image added 21/9/2013.p2 - "No 'O' class have been taken out of service / N,K or L/P have been sold or burnt so far" notes on photos - interior/exterior - "Steam Trail Cars". p8 "Saw 5802 go through Blacktown Sunday 28-6-1950".trams, tramways, sydney trams, houses, tramcar disposals, nswgr

Fiver black and white photographs showing the former Union Building, now the Federation University Albert Coates Complex, under construction. .1) View of the first stage residences site south west, shows Stage 1 Engineering and Metallurgy/Geology. .2) View of the first stage residences site to the South west. Roadway dam creates upper pond. .3) View of the first stage residences site to the eastward. Shows lower pond and roadway dam. .4) View of the first stage residences site to the South. Start of Union Building Construction. .5) .View to the south east across lower pond, shows the Tree of Knowledge and first stage buildings.albert coates complex, union building, mount helen campus

Axle box cover from a Tasmanian Main Line Railway rail vehicle from 1874 The Tasmanian Main Line Railway Company (T.M.R.L.) was a privately owned railway company that existed in Tasmania from 1872 to 1890. The company were the first operators of rail services between Hobart and Launceston, where it connected with the Launceston and Western Railway (L.W.R.) It started construction of a 3' 6" gauge line between Hobart and Launceston in 1873 which was completed in December 1875. and was officially opened on 1 November 1876. The route of the railway was selected largely as a result of vocal local interests and accordingly traversed some reasonably unfavorable topography, particularly in the southern section. Because the TMLR had limited finances, the line was built to the narrow (1067 mm) gauge and included long sections of steep gradients and sharp curves. The final eighteen kilometres of the route from Western Junction to Launceston used the existing broad gauge alignment of the Launceston and Western Railway, with a third rail being laid for use by the narrow gauge trains A close but uncomfortable relationship with the Government was resolved in 1890 with the purchase of the company's assets by the Crown and their incorporation into the Tasmanian Government Railways on 1 October 1890. Historic early Tasmanian Main Line Railway - Vehicle Axel Box cover Axle box cover from a Tasmanian Main Line rail vehicle from 1874.T.M.L.R - 1874 -axle, tasmanian main line railway, axle box, tasmania, main line,

The buildings at Kooyong have undergone various re-modelling and redesign over the years. These plaques commemorate the dual activities taking place at the Kooyong Centre, as it strove to adapt to the increasing need for technological support and the changes in information, day centre and supports needed by the blind and vision impaired community. These plaques were located in the corridor between reception and the day centre, but were dismantled during renovations in 2018.This plaque commemorates the start of construction of Vision Australia Foundation's information and technology facilities and was unveiled by Mr D R Argus AO, Patron Vision Australia Foundation, Chairman, Centenary Appeal in recognition of all who made this development possible for the lasting benefit of people who are blind or have severe sight loss. 27 March 2000, Malcolm Daubney, President. John Cook, Chief Executive Officer. This plaque commemorates the official opening of Vision Australia Foundation's Kooyong Centre by John Landy, AC, MBIE, Governor of Victoria, 11 October 2001. Building Donors: Don Argus, AO - Appeal Chairman, Shirley Admans, Amcor Limited, Aspect Consulting Pty Ltd, Atalina Nomines Pty Ltd, Robert Bosch (Aust) Pty Ltd, The William Buckland Foundation, Cadbury Schweppes Australia Ltd, Terry Cocks OAM, Coles Myer Ltd, Commonwealth Bank of Australia, Consolidated Paper Industries, John & Beverley Cook, The Craftsman Press Pty Ltd, Norma Crook, CSR Limited, Malcolm & Beverley Daubney, Don Draffin, Sir Andrew & Lady Fairley Foundation, Ford Motor Co. of Australia Ltd, Fortis Australia Ltd, Gandel Charitable Trust, Harold Gration, Dept of Health & Community Services, Peter Isaacson Publications Pty Ltd, Kayarem Pty Ltd, Kooyong Auxiliary, Kooyong Fair Committee, Lady Joan Law-Smith, Elaine Leahy, Eve & Lewis Lustig, Henry Malycon, Ann Miller, John Moule AM, Dame Elisabeth Murdoch, AC DBE, Sidney Myer Fund, National Australia Bank, Pacific Dunlop Ltd, Raleigh Paper Co Pty Ltd, Lady Catherine Ramsay, Rothschild Australia Ltd, Shell Australia Ltd, Slade & Partners, Springfield Auxiliary, Ian Roach AO, Rotary Club of Albert Park, Rotary Club of Hawthorn, The Top Opp Volunteers, Sir Donald & Lady Trescowthick Foundation Ltd, Graham Upton, John Wall OAM, John Wicking AM, Ian & Beverley Wilson, Woodside Petroleum Ltd.vision australia foundation, nameplates

E. R. Watts and Son, makers of theodolites and other surveying instruments, of 123 Camberwell Road, London. The company was established in 1856 by Edwin Watts at twenty-three he had saved £100 from his earnings to start the business with his staff consisting of one boy and later Alexander Clarkson as an apprentice with the workshop a small room over a Bemondsey stable. Watts' first order was from Negretti and Zambra for a mining dial Alexander Clarkson In the early days the firm worked mainly on marine compasses. Edwin Watts would go down to the Docks to adjust the compasses once they had been installed on the ships. In May 1873 the business moved to larger premises a house with a garden. The workshop was also the home of Mr and Mrs Watts and their five sons and three daughters. By now there were fifteen to twenty men employed by the firm. The company were commissioned to supply the Theodolites and Levels for the construction to the Canadian Pacific Railway in 1881. Towards the end of the century, the firm began to make heliographs continuing to produce them for the government until just before the Second World War when by agreement assigned their manufacture to another firm. 1904 The first dividing engine was completed by George William Watts. It was so remarkable an instrument at the time and for years afterwards, In 1907 Arthur Ames went to Canada and started an organisation in Winnipeg in 1909 this became a separate company called E. R. Watts and Son Ltd. of Ottawa. This firm developed considerably and was eventually with the co-operation of three other instrument companies (Cambridge Instrument Co, Ross, and Negretti and Zambra), were reconstituted as ”Instruments Ltd” of Ottawa and Toronto. During the next ten years, the firm expanded greatly to include glass grinding, leather work, dividing and engraving, testing, adjusting and packing. This expansion was continued during the First World War when workshops were completed and the machinery installed and running within eleven weeks from the start of construction. During the war, a Sergeant Coles, among the rats, lice and mud of the trenches, fitted various bits of scrap into his cocoa tin and made the first Flash Spotter for plotting the positions of enemy guns. Coles was rushed home to the firm's factory where he and George William Watts designed a spotter not made out of a cocoa tin and as a result, the Watts Vertical Force Variometer was developed during WWI. Other Watts instruments made in the First World War included the Light Mountain Theodolites which were taken on Mt Everest expeditions. In 1919 ER Watts and Sons was incorporated as a limited company and in 1939 G. A. Whipple joined the Board of Directors. Shortly afterwards, Frank Charles Watts died having been Chairman of the firm for over 37 years and seen it through the First World War with all its expansions and difficulties. He was succeeded by his brother George William Watts with the vacant post of Managing Director being filled by G. A. Whipple. During the Second World War, the company expanded further and the number of employees rose to well over 1,300. In 1946 Watts acquired 78% of Adam Hilger and the microscope maker James Swift and Son Who were Manufacturers of Theodolites, Levels, Alidades, Meteorological Instruments, Variometers, and many other types of scientific instruments Then in 1948 the company amalgamated with Adam Hilger as Hilger and Watts which was then incorporated as a public company.Naval Rangefinder with a vertical wooden handle, and an arrangement of optical lenses. Three reversible brass inserts calibrated on both sides in yards, correspond to various base heights, (20 and 25 feet, 30 and 35 feet and 40 and 50 feet). They are fitted along the axis of the instrument. When the scale for the appropriate base height is selected and inserted, the carriage can be slid for coincidence and the distance read at the index mark on the sliding carriage.inscribed "Rangefinder Cotton Type Mk II" Calibrated scale up to 5000 yds (50 ft), 5000 yds (35 ft), 4000 yds (25 ft) made by E. R. Watts & Son.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, rangefinder, cotton type, e r watts & sons, naval range finder, marine equipment

Breakwater navigation lights are placed at the end of the breakwaters to warn incoming vessels of the end of the structure, as a marine safety measure. The subject item was such a light believed to have been placed at the end of Warrnambool's breakwater around 1915 when it was extended. The light had remained in place for many years until it was probably removed when the structure was undergoing rock armouring repairs to the end of the breakwater in 1975. The light had been placed in a council storage shed probably from the time when the structure was undergoing these repairs in 1975. In 2014 the light was removed from the storage shed and donated to Flagstaff Hill museum. History: Warrnambool breakwater plans were drawn up by 1874 and approval was given for preliminary construction work to start but when the money ran out, the works stopped. With a number of quick changes of government the “Warrnambool” breakwater project was kicked from one Victorian state government to another. Then finally in 1879, the eminent British harbour engineer Sir John Coode was asked to design a breakwater. His first design was for a 1800 feet long structure but that was scaled back to 900 feet and construction finally began in 1884. This structure was attributed in causing major siltation of Lady bay, as a consequence the breakwater was again extended in 1915. In 1975, the rock armouring at the end of the breakwater was added but by 1979 another impact study was calling for the breakwater to be removed altogether. The Heritage Council Victoria, regard the Warrnambool breakwater is of historical significance to the state as one of the most important maritime engineering projects that was undertaken in Victoria during the late nineteenth century. The light is also as part of this structure regarded as a significant item of historical interest.Marker light or navigation light. Round light stand with conical top piece (2 separate pieces). Metal base painted red, clear glass middle section enclosed by metal frame, metal cone shaped top section painted silver. Electrical wiring can be seen inside centre section. Pole that light would have been on to elevate it is missing.Has metal plate screwed onto side of base engraved "23". flagstaff hill, warrnambool, shipreck coast, flagstaff hill maritime museum, maritime museum, great ocean road, warrnambool breakwater, marker light, naviagtion light, breakwater navigation light

Colour photographWritten on back of photo: "12/2/95-Start of Bypass-Creek Deviation"

Colour photographWritten on back of photo: "12/2/95-Start of Bypass-Creek Deviation"

Colour photographWritten on back of photo: "12/2/95-Start of Bypass-Creek Deviation"

Each plaque has 4 names on being the winning team for that year. The plaques start 1971 and the last 1981. The Bendigo RSL Sub Branch conducted a Diggers Day Bowls as far back as 1953.Trophy, brown wood rectangular base shape with 3 pillars on top of metallic construction, all are round shape, 2 have a depiction of a bird on top with outstretched wings, the centre shorter one has a depiction of a man playing bowls. The base has a central plaque with a wreath around engraved in the middle. On the left of the base are 10 x small plaques engraved with names on, 1 x small plaque on the right of the base.On centre plaque, "Presented by R.H. Trethewey MLA - Perpetual Trophy - Diggers Day Tournament". Example plaque, "1977 - H. Tobin - W. Smith - P. Weymouth - J. Cruse"brsl, smirsl, diggers day, bowls

The port facilities in Warrnambool Bay were in constant use from the first years of Warrnambool’s settlement but there were also difficulties for the shipping trade – a small and unsafe anchorage, the lack of loading facilities and little natural protection from the southerly gales. From the 1870s on there was local agitation for some sort of Breakwater to be built and an Andrew Kerr design was approved by the Warrnambool Council but no funds were made available from the Victorian Government. Throughout the 1870s the building of a Breakwater was a major political issue in the district with preliminary work being funded and started in 1874. In 1879 the Government agreed to a further inspection of the area and an official report. Sir John Coode (1816-1892) was commissioned to make this report. He had come to Australia in 1872 to advise on harbour construction. Coode recommended a 1800 feet long Breakwater and wharf connected to the shore and it was this proposal that the plan described herein and drawn up in 1879 was to accompany. The original plan was eventually modified because of the cost and a Breakwater was completed in 1890 under the direction of the engineer, Arthur Dudley Dobson, with extensions early in the 20th century. This plan is of great interest as it shows in simple graphic form the original plans proposed by Sir John Coode for the Warrnambool Breakwater. It is therefore of great historical importance. The Breakwater was not the maritime success that it was hoped it would be but it is today a significant feature of our foreshore. This is a Plan drawn up in 1879 by Victorian Harbours to accompany Sir John Coode’s Report on the proposed Warrnambool Breakwater. The chart detail is hand-drawn and hand-tinted on canvas with the names of places, geographical and marine features and local points of interest added in print. The edges of the chart are rubbed and the chart is somewhat faded and dirty but the main colours of red, green and brown are still clearly discernible. The title of the plan is printed in an oval inset at the top of the chart. The plan shows two possible Breakwater designs, one from the Borough Surveyor (Andrew Kerr?) and one from Sir John Coode.Victorian Harbours Warrnambool Plan to accompany Sir John Coode’s report Dated 28th Feby 1879 warrnambool breakwater, andrew kerr, sir john coode, arthur dudley dobson, warrnambool, warrnambool harbour, warrnambool history, warrnambool beach