BHS CollectionTimber panel, stained and decorated. Work sample from the last Bendigo coachworks Company. The main part of the panel is brown with a large flowery design in the middle, there are small flowers all around a small green band runs around and at the four corners a larger flower, there is a larger yellow band and another small green one followed by a large black band all along the black band more flower designs and another small green band, the panel is completed by another yellow band. The initial F. W. are on the outside black band. On the back the inscription ''Sample of gig and buggy lining done in 1969 by the last of the fully trained people in Bendigo'' written by John Ellison, Kangaroo Flat. Also the name Phillip is written on the back. from George Harris estateephemera, mementoes, timber panel

Timber panels salvaged from the foyer of Forestry House 601 Bourke Street in late1980s. The material for the plaques was assembled in carpenters shop in FCV districts throughout the State. Timber was kiln dried by M. Feiglin & Sons at Nunawading and erected by Peter Danby Pty. Ltd. Two highly decorative panels thought to be carved by Robert Prenzel in about 1908. Closely linked to FCV Forestry House in MelbourneTimber Display PanelTwo highly carved panels thought to carved by Robert Prenzel in about 1908forests commission victoria (fcv)

There were at least three 1880s vessels named Lady Loch, all built in Victoria; a river launch (ca 1884-ca 1916, originally named Lady of the Lake), a steamer ferry (1884-1920s) and a government lighthouse tender steamer HMV Lady Loch (1886-1962.) The carved wooden panel was removed from the HMV SS Lady Loch before the vessel was scuttled in 1962. About HMV SS Lady Loch: - The HMV SS Lady Loch was an iron steamship built in Footscray, Melbourne, by Campbell, Sloss and McCain in 1886 for the colonial Victorian government’s Department of Trade and Customs. It was armed with a 6-inch gun and two 1-inch Nordenfelt guns. The Sydney Morning Herald of 27th January 1888 describes the vessel in detail. It even comments on the interior of the Saloon “The wood work … is on a very elaborate scale and is exceedingly neat …”. The HMV Lady Loch performed Customs duties, and serviced the lighthouses along the coast. The scale could have measured goods for the Customs Tax, or for measuring out supplies for the lighthouse keepers. The vessel was named after Lady Elizabeth Loch, wife of Sir Henry Loch, Governor of Victoria from 1884 to 1889. In 1932 Lady Loch was converted to a hulk and used in Brisbane, and finally scuttled in 1962 at Moreton Bay, Queensland. The carved wood panel has importance due to its connection to the 1886 HMV Lady Loch, a vessel of great significance to Melbourne’s shipbuilding industry. It was the largest auxiliary vessel in the Victorian Colonial Government’s fleet and the first prominent vessel launched by Melbourne’s shipbuilding industry. It is significant to the history of the Victorian era and the colonial navy's steamship HMV SS Lady Loch. The vessel carried out Custom's work, and the scales were available to weigh goods that could attract taxes and goods for distribution to lighthouse keepers. The HMV Lady Loch was also important part of Victoria's maritime history, its communication with and support of the lighthouse keepers along the coast of Victoria.Heavy carved wooden panel, square, representing a framed plaque. The bottom and right edges are scalloped on the outer and inner edges. A carved oval within the frame represents a wide belt with buckle and tongue, and indents for the belt holes on its left and a carved inscription runs from top centre to bottom centre on the right side of the belt. Within the belt is the maritime symbol of an upright anchor in front of a rope. It was once part of the furnishing of the steamer HMVS Lady Loch and was removed before the ship was scuttled.Carved within the belt: "STEAM SHIP LADY LOCH"warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, scale, salter, spring balance, silvester's patent, lady loch, steamship, hmv, colonial navy, victoria, lady elizabeth loch, custom's vessel, lighthouse tender, 1886, government vessel, victorian government, wood panel, timber panel, carved panel, carved log, lady loch logo, belt enclosing and anchor, anchor within belt, lady loch steam ship, wooden panel, ship's furinshing, ship's panel, ship's logo, great ocean road, government steamer, victorian colonial government, colonial vessel, public works, bass straight, hmv lady loch, hmvs lady loch, hmv ss lady loch, melbourne, melbourne shipbuilder, ship furnishings, wooden furnishings, decorative panel, carved emblem, carved logo, carved symbol, campbell stoss and mccain, government tender, victorian customs

Photo of Harry Tinson who was winemaker at Baileys in Glenrowan from 1968 until 1982. An ageing Alan Bailey (greatgrandson of founder Richard Bailey) sold the winery to Davis Consolidated Industries (mainly a gelatine producer). At the time Harry Tinson, with a Master’s degree in physical engineering, was in the corporate planning department of Davis. The board had decided it wished to diversify into wine production and Tinson was charged with the responsibility of finding a suitable target. He came up with Baileys, and was instructed to negotiate the purchase of a 50 per cent share in the business. Bailey said “all or nothing” ! (James Halliday – news article 22/01/2011)Colour transparency photograph of a man standing in front of a timber panelled wall, featuring an advertising poster for Baileys Bundarra Vineyardswineries, north east victoria, wine industry, baileys, winemaker

Specimens illlustrating process control & finished product.Timber demonstration wall panelMunitions Supply Laboratories. Munitions Supply Board. Department of Defence

This print was an 1885 Christmas gift from the publishers of the Australian Town and Country Journal to their subscribers. At that time Queen Victoria was 65 years old although she may not have been that age when the portrait was painted. The print shows Queen Victoria’s signature in the bottom right corner. It cost sixpence per copy and operated from 1870-1919. The Australian Town and Country Journal was printed weekly, on Saturdays, in Sydney. The edition on December 26, 1885, contained 51 pages. The Journal claimed “Circulation Ten Thousand Copies, Greater than any other Weekly in Australia.” The frame of the print has a solid back of thick timber panels and is crudely made. The edges of the frame appear to have an underlying plaster base that has been covered with a layer of wood. The corners are reinforced with metal protectors. The subject of the print is Queen Victoria, Queen of the United Kingdom of Britain and Ireland. She was born as Princess Alexandrina Victoria of Kent on May 24, 1819. She became Queen on June 24, 1837 when King William IV died. She married Prince Albert of Saxe-Coburg and Gotha on February 10, 1840. Queen Victoria lived and reigned until her death on January 22, 1901, at age 82 years, after reigning for sixty-three years and seven months. This portrait is significant historically for its origin as an inclusion the Australian Town and Country Journal, a late 19th century Australian weekly newspaper, in circulation for almost fifty years. The portrait gifted to the newspaper’s subscribers is historically significant as an example of the connection between the people in the British Colony of Australia, with the value and respect held for the Queen of the Colony. The frame of the portrait, of solid and protective construction, shows the value that the owners placed on this portrait.Print behind glass in a brown wooden frame; coloured print of a portrait of Queen Victoria, made in watercolours. The Queen is wearing a blue sash, crown, and white ribbon pinned to the sash along with a cameo brooch and Royal Emblem. The portrait has an oval floral border of roses in pastel colours. Text is printed outside the border, as a title above and a signature below, in the lower right corner. The back of the frame is made of heavy timber panels with holes for attaching wire. The timber frame is over a white layer of soft substance, perhaps plaster. "Presented to the Subscribers of the Australian Town and Country Journal, December 25th 1885" “Victoria R”flagstaff hill, warrnambool, flagstaff hill maritime village, flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, queen victoria, princess alexandrina victoria of kent, portrait of queen victoria, australian town and country journal, presented to subscribers, 1885

Dark wood honour board with gold lettering attached to the wall in the foyer at the Brighton Town Hall. A roundel in timber relief at the top containing the City of Brighton crest and British Coat of Arms. Below that is a raised timber relief panel inscribed in gold lettering 'MAYORS OF THE MUNICIPALITY'. The list of names and dates of the mayors from 1859 to 1965 is split over 2 raised timber panels, in four columns and divided by the headings BOROUGH, TOWN and CITY. mayor, municpality, brighton, city of brighton, borough of brighton, town of brighton, honour board, crest, coat of arms, brighton town hall

Originally this teaching model belonged to Prince Henry's hospital library and was transferred to the Monash Medical Centre, Clayton in the 1970s by Sister Gertrude Berger, a famous nurse-educator, who is best known for her work leading up to the transfer of nursing education in Victoria from hospitals to universities in 1986.Gerty (as she was known in the School of Nursing) bought them in Europe in the late 1940s and early 1950s.Teaching model- 3D Female Reproduction Organs Painted and numbered plastic mould, showing vagina and one ovary and fallopian tube in cross-section. The model is mounted on a metallic grey painted timber panel. Manufacturer Adam Rouilly, London. label on lower right.]. Monash Medical Centre Clayton.teaching model anatomy, female reproduction organs

The portable lock up at Eltham is not original to the site. The date of construction is unknown. It is a pre-fabricated design and each of the timber panels are individually numbered on the inside surfaces. It is amongst a large group of portable locks up,categorised as 'Portable Lock Up - Timber - Later' and also known as the "Casterton style", based on the only known plan for portable lock ups, built for the Casterton Police Station, in 1907. The later portables have been in use since the 1880s. It is not known how many lock ups of this type have been constructed in Victoria. At least 50 examples have been documented around the state. Of these, 42 are known to be extant.This lockup used to be located at the Police Station in Pryor Street and was then stored in Youth Road before being acquired for the Local History Centre 9 colour photographseltham, main road, police residence, local history centre, eltham district historical society, courthouse, youth road

The portable lock up at Eltham is not original to the site. The date of construction is unknown. It is a pre-fabricated design and each of the timber panels are individually numbered on the inside surfaces. It is amongst a large group of portable locks up,categorised as 'Portable Lock Up - Timber - Later' and also known as the "Casterton style", based on the only known plan for portable lock ups, built for the Casterton Police Station, in 1907. The later portables have been in use since the 1880s. It is not known how many lock ups of this type have been constructed in Victoria. At least 50 examples have been documented around the state. Of these, 42 are known to be extant.This lockup used to be located at the Police Station in Pryor Street and was then stored in Youth Road before being acquired for the Local History Centre 2 colour photographseltham, main road, police residence, local history centre, eltham district historical society, courthouse, youth road

The wooden door was salvaged from the wreck of the sailing ship Eric the Red, which was a wooden, three masted clipper ship. Eric the Red was the largest full-rigged ship built at Bath, Maine, USA in 1871, having had a 1,580 tons register. She was built and registered by Arthur Sewall, later to become the partnership E. & A. Sewall, the 51st ship built by this company. The annually-published List of Merchant Vessels of the U.S. shows Bath was still the home port of Eric the Red in 1880. The vessel was named after the Viking discoverer, Eric the Red, who was the first European to reach the shores of North America (in 980AD). The ship Eric the Red at first traded in coal between America and Britain, and later traded in guano nitrates from South America. In 1879 she was re-metalled and was in first class condition. On 10th June 1880 (some records say 12th June) Eric the Red departed New York for Melbourne and then Sydney. She had been commissioned by American trade representatives to carry a special cargo of 500 exhibits (1400 tons) – about a quarter to a third of America’s total exhibits - from America for the U.S.A. pavilion at Melbourne’s first International Exhibition. The exhibits included furniture, ironmongery, wines, chemicals, dental and surgical instruments, paper, cages, bronze lamp trimmings, axles, stamped ware, astronomical and time globes, samples of corn and the choicest of leaf tobacco. Other general cargo included merchandise such as cases of kerosene and turpentine, brooms, Bristol's Sarsaparilla, Wheeler and Wilson sewing machines, Wheeler’s thresher machine, axe handles and tools, cases of silver plate, toys, pianos and organs, carriages and Yankee notions. The Eric the Red left New York under the command of Captain Z. Allen (or some records say Captain Jacques Allen) and 24 other crew including the owner’s son third mate Ned Sewall. There were 2 saloon passengers also. The ship had been sailing for an uneventful 85 days and the voyage was almost at its end. On 4th September 1880 the Eric the Red approached Cape Otway with a moderate north-west wind and hazy and overcast atmosphere. Around 1:30am Captain Allen sighted the Cape Otway light and was keeping the ship 5-6 miles offshore to stay clear of the hazardous Otway Reef. However he had badly misjudged his position. The ship hit the Otway Reef about 2 miles out to sea, south west of the Cape Otway light station. He ordered the wheel to be put ‘hard up’ thinking that she might float off the reef. A heavy sea knocked the man away from the wheel, broke the wheel ropes and carried away the rudder. The sea swamped the lifeboats. The mizzenmast fell, with all of its rigging, then the mainmast also fell and the ship broke in two. Some said that the passenger Vaughan, who was travelling for his health and not very strong, was washed overboard and never seen again. The ship started breaking up. The forward house came adrift with three of the crew on it as well as a longboat, which the men succeeded in launching and keeping afloat by continually bailing with their sea boots. The captain, the third mate (the owner’s son) and others clung to the mizzenmast in the sea. Then the owner’s son was washed away off the mast. Within 10 minutes the rest of the ship was in pieces, completely wrecked, with cargo and wreckage floating in the sea. The captain encouraged the second mate to swim with him to the deckhouse where there were other crew but the second mate wouldn’t go with him. Eventually the Captain made it to the deckhouse and the men pulled him up. At about 4:30am the group of men on the deckhouse saw the lights of a steamer and called for help. At the same time they noticed the second mate and the other man had drifted nearby, still on the spur, and pulled them both onto the wreck. The coastal steamer Dawn was returning to Warrnambool from Melbourne, its sailing time different to its usual schedule. Captain Jones sent out two life boats, and fired off rockets and blue lights to illuminate the area. They picked up the three survivors who were in the long boat from Eric the Red. Two men were picked up out of the water, one being the owner’s son who was clinging to floating kerosene boxes. At daylight the Dawn then rescued the 18 men from the floating portion of the deckhouse, which had drifted about 4 miles from where they’d struck the reef. Shortly after the rescue the deckhouse drifted onto breakers and was thrown onto rocks at Point Franklin, about 2 miles east of Cape Otway. Captain Jones had signalled to Cape Otway lighthouse the number of the Eric the Red and later signalled that there was a wreck at Otway Reef but there was no response from the lighthouse. The captain and crew of the Dawn spent several more hours searching unsuccessfully for more survivors, even going back as far as Apollo Bay. On board the Dawn the exhausted men received care and attention to their needs and wants, including much needed clothing. Captain Allen was amongst the 23 battered and injured men who were rescued and later taken to Warrnambool for care. Warrnambool’s mayor and town clerk offered them all hospitality, the three badly injured men going to the hospital for care and others to the Olive Branch Hotel, then on to Melbourne. Captain Allen’s leg injury prevented him from going ashore so he and three other men travelled on the Dawn to Portland. They were met by the mayor who also treated them all with great kindness. Captain Allen took the train back to Melbourne then returned to America. Those saved were Captain Z. Allen (or Jacques Allen), J. Darcy chief mate, James F. Lawrence second mate, Ned Sewall third mate and owner’s son, John French the cook, C. Nelson sail maker, Clarence W. New passenger, and the able seamen Dickenson, J. Black, Denis White, C. Herbert, C. Thompson, A. Brooks, D. Wilson, J. Ellis, Q. Thompson, C. Newman, W. Paul, J. Davis, M. Horenleng, J. Ogduff, T. W. Drew, R. Richardson. Four men had lost their lives; three of them were crew (Gus Dahlgreen ship’s carpenter, H. Ackman steward, who drowned in his cabin, and George Silver seaman) and one a passenger (J. B. Vaughan). The body of one of them had been found washed up at Cape Otway and was later buried in the lighthouse cemetery; another body was seen on an inaccessible ledge. Twelve months later the second mate James F. Lawrence, from Nova Scotia, passed away in the Warrnambool district; an obituary was displayed in the local paper. The captain and crew of the Dawn were recognised by the United States Government in July 1881 for their humane efforts, being thanked and presented with substantial monetary rewards, medals and gifts. Neither the ship, nor its cargo, was insured. The ship was worth about £15,000 and the cargo was reportedly worth £40,000; only about £2,000 worth had been recovered. Cargo and wreckage washed up at Apollo Bay, Peterborough, Port Campbell, Western Port and according to some reports, even as far away as the beaches of New Zealand. The day after the wreck the government steam ship Pharos was sent from Queenscliff to clear the shipping lanes of debris that could be a danger to ships. The large midship deckhouse of the ship was found floating in a calm sea near Henty Reef. Items such as an American chair, a ladder and a nest of boxes were all on top of the deckhouse. As it was so large and could cause danger to passing ships, Captain Payne had the deckhouse towed towards the shore just beyond Apollo Bay. Between Apollo Bay and Blanket Bay the captain and crew of Pharos collected Wheeler and Wilson sewing machines, nests of boxes, bottles of Bristol’s sarsaparilla, pieces of common American chairs, axe handles, a Wheelers’ Patent thresher and a sailor’s trunk with the words “A. James” on the front. A ship’s flag-board bearing the words “Eric the Red” was found on the deckhouse; finally those on board the Pharos had the name of the wrecked vessel. During this operation Pharos came across the government steamer Victoria and also a steamer S.S. Otway, both of which were picking up flotsam and wreckage. A whole side of the hull and three large pieces of the other side of the hull, with some of the copper sheathing stripped off, had floated on to Point Franklin. Some of the vessels yards and portions of her masts were on shore. The pieces of canvas attached to the yards and masts confirmed that the vessel had been under sail. The beach there was piled with debris several feet high. There were many cases of Diamond Oil kerosene, labelled R. W. Cameron and Company, New York. There were also many large planks of red pine, portions of a small white boat and a large, well-used oar. Other items found ashore included sewing machines (some consigned to ‘Long and Co.”) and notions, axe and scythe handles, hay forks, wooden pegs, rolls of wire (some branded “T.S” and Co, Melbourne”), kegs of nails branded “A.T. and Co.” from the factory of A. Field and Son, Taunton, Massachusetts, croquet balls and mallets, buggy fittings, rat traps, perfumery, cutlery and Douay Bibles, clocks, bicycles, chairs, a fly wheel, a cooking stove, timber, boxes, pianos, organs and a ladder. (Wooden clothes pegs drifted in for many years). There seemed to be no personal luggage or clothing. The Pharos encountered a long line, about one and a half miles, of floating wreckage about 10 miles off land, south east of Cape Otway, and in some places about 40 feet wide. It seemed that more than half of it was from Eric the Red. The ship’s crew rescued 3 cases that were for the Melbourne Exhibition and other items from amongst the debris. There were also chairs, doors, musical instruments, washing boards, nests of trunks and fly catchers floating in the sea. Most of the goods were saturated and smelt of kerosene. A section of the hull lies buried in the sand at Parker River Beach. An anchor with chain is embedded in the rocks east of Point Franklin and a second anchor, thought to be from Eric the Red, is on display at the Cape Otway light station. (There is a photograph of a life belt on the verandah of Rivernook Guest House in Princetown with the words “ERIC THE RED / BOSTON”. This is rather a mystery as the ship was registered in Bath, Maine, USA.) Parts of the ship are on display at Bimbi Park Caravan Park and at Apollo Bay Museum. Flagstaff Hill Maritime Village also has part of the helm (steering wheel), a carved wooden sword (said to be the only remaining portion of the ship’s figurehead; further research is currently being carried out), a door, a metal rod and samples of wood. Much of the wreckage was recovered by the local residents before police and other authorities arrived at the scene. Looters went to great effort to salvage goods, being lowered down the high cliff faces to areas with little or no beach to collect items from the wreckage, their mates above watching out for dangerous waves. A Tasmanian newspaper reports on a court case in Stawell, Victoria, noting a man who was caught 2 months later selling tobacco from the wreckage of Eric the Red. Some of the silverware is still treasured by descendants of Mr Mackenzie who was given these items by officials for his help in securing the cargo. The gifts included silver coffee and tea pots, half a dozen silver serviette rings and two sewing machines. The wreck and cargo were sold to a Melbourne man who salvaged a quantity of high quality tobacco and dental and surgical instruments. Timbers from the ship were salvaged and used in the construction of houses and sheds around Apollo Bay, including a guest house, Milford House (since burnt down in bushfires), which had furniture, fittings and timber on the dining room floor from the ship. A 39.7 foot long trading ketch, the Apollo, was also built from its timbers by Mr Burgess in 1883 and subsequently used in Tasmanian waters. It was the first attempt at ship building in Apollo bay. In 1881 a red light was installed about 300 feet above sea level at the base of the Cape Otway lighthouse to warn ships when they were too close to shore; It would not be visible unless a ship came within 3 miles from it. This has proved to be an effective warning. The State Library of Victoria has a lithograph in its collection depicting the steamer Dawn and the shipwrecked men, titled. "Wreck of the ship Eric the Red, Cape Otway: rescue of the crew by the Dawn". “The Eric the Red is historically significant as one of Victoria's major 19th century shipwrecks. (Heritage Victoria Eric the Red; HV ID 239) The wreck led to the provision of an additional warning light placed below the Cape Otway lighthouse to alert mariners to the location of Otway Reef. The site is archaeologically significant for its remains of a large and varied cargo and ship's fittings being scattered over a wide area. The site is recreationally and aesthetically significant as it is one of the few sites along this coast where tourists can visit identifiable remains of a large wooden shipwreck, and for its location set against the background of Cape Otway, Bass Strait, and the Cape Otway lighthouse.“ (Victorian Heritage Database Registration Number S239, Official Number 8745 USA) Door from the wreck of the ship Eric the Red. The wooden singular rectangular door includes three insert panel sections. The top section is square shaped and is missing its panel or glass. The centre timber panel is about a third of the height of the top panel and the bottom timber panel is approximately equal in height to the total height of the two upper panels. The door fastenings include both a metal door latch and traditional door bolt. They are both attached to the front right hand side of the door. The bolt is just below the top panel, and the door latch is in approximately the centre of that side. The door latch has a round mark where a handle could have been attached. The wood of the door has scraping marks in a semi-circle around the door latch where the latch has swung around on its one remaining fastening and grazed the surface. There is a metal hinge at the top section of the door on the opposite side to the latch. The painted surface has been scraped back to expose the wood. The door is shorter than the average height of a person. On the reverse of the door there are lines on the panels, just inside their edges, is what appears to be pencil. The door is not aligned straight but is skew to centre.warrnambool, flagstaff hill, flagstaff hill maritime village, maritime museum, shipwreck coast, great ocean road, shipwreck artefact, eric the red, jaques allen, sewall, 1880, melbourne exhibition 1880, cape otway, otway reef, victorian shipwreck, bass strait, eric-the-red, door

Used in the Victorian Civil Ambulance Service Lonsdale Street headquarters until that facility closed and moved to Latrobe Street. The small size of this headquarters service switchboard demonstrates the rapid growth of the ambulance service in the 20th CenturyBrown timber switchboard. Black switch panel on front and notice plaque top right corner.noticevictorian civil ambulance service, lonsdale street

Large presentation board consiting of 3 varnished horizontal timber panels with 28 presentation plaques affixed. The plaques affixed are (RMC MUR + 2 TG + 3 TG + 6 TG + PWLH + 1 CAV + VMR + 2/14 QMI + 7 RTR + 1 RVR + 1 RVR + 6 RVR + 3 RVR + 5/6 RVR + 22RVR + 8/7 RVR + 17 RNSWR + 58/32 CER + 1 RVR + 3 RAR + 5 RAR + 7 RAR + WO2 White + 5/7 RAR +6 RAR + 8/9 RAR + JTC)5/6 rvr, plaque, bhq

The poster has the following instructions for the treatment of snake bite:- "A ligature, that is, a strong string or narrow strip of clothing if no string is to be had, should be at once applied near the bitten part, and between the bite and the heart. tight enough to stop the circulation. The bitten part should then be immediately cut out by making, in the manner shown in the engravings, two curved incisions, which should be, where practicable, a quarter of an inch deep. The wound should then be well sucked for then minutes, by persons who have no wound, cut, sore or ulcer in their mouths, or on their lips. When the bite is on the head, face or body, or on any place where a ligature cannot be applied, the bitten part should be kept tightly pinched up till it can be cut out." The poster was authorised by T.R. Wilson, Secretary of Melbourne's Central Board of Health, between 1865 and 1881. It was printed by John Ferres, Government Printer, Melbourne, 1865-1881. The Central Board of Health, Melbourne, was in existence between 1855 and 1889. This poster has significance as an early record of public health instruction issued by the Central Board of Health in Melbourne for the treatment of snake-bite. The materials used to mount and frame the poster are also of significance, with the printing being done on fabric, and the newspaper inserted between the poster and the backboards.Timber-framed rectangular poster with printed instructions for treating a snake bite. The poster is printed on fabric. Between the poster and the backboards is a layer of newspaper, revealed by the damaged fabric. The back of the frame is filled by three vertical timber panels that are strengthened by three horizontal timber slats across the top, centre and bottom. The timbers are fixed in place with nails. The edges of the frame at the back have remnants of paper. Two metal eyelets are inserted into the top edge of the frame. The poster was issued by the Central Board of Health in Melbourne and printed by the Government Printer in Melbourne. It has the British Coat of Arms on top, diagrams and text, plus sections of newsprint.Symbol of [British Coat of Arms] between the letters "V." and "R." Headline "CENTRAL BOARD OF HEALTH" Subheading "WHAT TO DO IN CASE OF SNAKE-BITE" Instructions are printed on the poster. Diagrams include a bite on the knee and bites on the hand. Publisher "Central Board of Health, Melbourne, 28th February ----" "(By Order of the Board), T.R. WILSON, Secretary" "BY AUTHORITY, - - - - - - - - -, GOVERNMENT PRINTER, MELBOURNE" Newsprint includes:- "Duties in the bay were put ... --rried out. On ... harbour boat's cr-- ... , and formed of sufficient ... given ... to vessels in distress, and ... life-b- ... the help of a few..." and "last, a Gold English ... engraved -- cove-- to leave it at F.P. ..."flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, central board of health, melbourne, t.r. wilson, secretasry, government printer, john ferres, snake-bite, treatment, first aid, 19th century, poster, government health announcement

Set of 10 Digital Images of the work involved in the repairs to tram No. 40 during the period 7/8/2004 to 26/12/2004. .1 - No. 1 end panel removed .2 - work to sand down underway - not top gutter rail. .3 - Trolley with trolley pole bases .4 - damaged to gutter metal work .5 - close up showing the rust to the metalwork at No. 1 end drivers dash .6 - removed panels .7 - rust to the gutter metal work .8 - Alastair Reither sanding one of the pillars .9 - ditto .10 - work progressing with undercoat and new timber panel - ex the packing case that arrived with the Isolating Transformer.trams, tramways, btm, maintenance, painting, tramcars, trolley poles, tram 40

This portable lock up is not original to the site. The date of construction is unknown. It is a pre-fabricated design and each of the timber panels are individually numbered on the inside surfaces. It is amongst a large group of portable locks up, categorised as 'Portable Lock Up - Timber - Later' and also known as the "Casterton style", based on the only known plan for portable lock ups, built for the Casterton Police Station, in 1907. The later portables have been in use since the 1880s. It is not known how many lock ups of this type have been constructed in Victoria. At least 50 examples have been documented around the state. Of these, 42 are known to be extant. This lockup used to be located at the Police Station in Pryor Street and was then stored in Youth Road before being acquired for the Local History Centre in 2001. Lock-up No. 17 taken on the ocassion of the opening of the newly refurbished Eltham Local History Centre Open Day, 4 March 2017, Celebrating 50 years of the Society 1967-2017.Born Digitalactivities, eltham district historical society, local history centre, main road, eltham, 50th anniversary, open day, lock up, lock-up, gaol, jail

Balancing resistances in a a varnished timber box, black top panel mountted, four decase selctor. Switches: Units, tens, hundres, thousandsBalancing resistancescientific instrument, ballarat school of mines, electricity, physics, electrical engineering

This altar and rear reredos were part of the original furnishings of the St Nicholas' Mission to Seamen's Church at 139 Nelson Place, Williamstown, Victoria. The Church was operated by the Mission to Seamen organisation. The reredos was donated to the Williamstown chapel by Miss. M. Breaks, in memoriam Miss. L.A. Breaks, who served a very active part in the Seamen's Mission, and the altar was donated by Mr and Miss J R Schutt. THE MISSIONS TO SEAMEN (Brief History: for more, see our Reg. No. 611, Set of Pews) The Missions to Seamen was an Anglican charity that served seafarers of the world since 1856 in Great Britain. It symbol is a Flying Angel, inspired by a Bible verse. Today there are centres in over 200 ports worldwide where seamen of all backgrounds are offered a warm welcome and provided with a wide range of facilities. In Victoria, the organisation began in Williamstown in 1857 as a Sailors’ Church, also known as ‘Bethel’ or the ‘Floating Church’ in an old hulk floating in Hobson’s Bay, Port of Melbourne. It soon became part of the Missions to Seamen, Victoria. In the year 2000 the organisation, now named Mission to Seafarers, still operated locally in Melbourne, Portland, Geelong and Hastings. The Ladies’ Harbour Lights Guild was formed in 1906 to support the Missions to Seamen in Melbourne and other centres such as Williamstown. Two of the most significant ladies of the Guild were founder Ethel Augusta Godfrey and foundation member Alice Sibthorpe Tracy (who established a branch of the Guild in Warrnambool in 1920). The Guild continued its work until the 1960s. In 1943 a former Williamstown bank was purchased for the Missions to Seaman Club. The chapel was named St Nicholas’ Seamen’s Church and was supported by the Ladies’ Harbour Lights Guild, the Williamstown Lightkeepers’ Auxiliary and the League of Soldiers’ and Sailors’ Friends. It ceased operation in 1966. A Missions to Seamen Chapel and Recreation Room was a significant feature of ports during the late 1800s and into the 1900s. It seemed appropriate for Flagstaff Hill to include such a representation within the new Maritime Village, so the Melbourne Board of Management of Missions to Seamen Victoria gave its permission on 21st May 1979 for the entire furnishings of the Williamstown chapel to be transferred to Flagstaff Hill. The St Nicholas Seamen’s Church was officially opened on October 11, 1981, and closely resembles the Williamstown chapel. This altar and reredos are significant historically for its origin in the St Nicholas Mission to Seamen's Church in Williamstown, established in 1857 to cater for the physical, social, and spiritual needs of seafarers. It originated in Bristol, England when a Seamen's Mission was formed in 1837. They are historically significant for their connection to the Ladies Lightkeepers’ Auxiliary, an organisation of women, formed to support seafarers. The connection of this furniture to the Mission to Seamen and to the Ladies Lightkeepers’ Auxiliary highlights the strong community awareness of the life of people at sea, their dangers and hardships, and their need for physical, financial, spiritual and moral support. Altar and reredos or altar panel, wooden. The timber is panelled, stained and has a varnished finish. The base has a detachable vertical panel with the decoration of a sword and two anchors, the reredos has a cross on a panel. It was made by Hadwen and Houghton, Malvern, Victoria. A plaque at the bottom right edge is marked with the maker's name. The altar is part of the St Nicholas Seamen's Church collection.On removable panel; logo of [sword and two anchors] On bottom right of base: "Hadwen and Houghton, Malvern"flagstaff hill maritime museum and village, flagstaff hill, warrnambool, maritime museum, maritime village, shipwreck coast, great ocean road, religion, religious service, st nicholas seamen’s church, williamstown, missions to seamen victoria, altar, reredos, church furniture, religious furniture, miss m breaks, miss l a breaks, mr and miss j r schutt., worship service

The portable lockup at Eltham is not original to the site. The date of construction is unknown, believed from the 1880s. It is a prefabricated design and each of the timber panels are individually numbered on the inside surfaces. It is amongst a large group of portable lockups, categorised as 'Portable Lock Up - Timber - Later' and also known as the "Casterton style", based on the only known plan for portable lock ups, built for the Casterton Police Station, in 1907. The later portables have been in use since the 1880s. It is not known how many lock ups of this type have been constructed in Victoria. At least 50 examples have been documented around the state. Of these, 42 are known to be extant. The original 1860s site lockup was a 2-cell bluestone construction. Some of the original bluestone remains. It was used in the 1970s as traffic island edging at the intersection of Main Road and Wattletree Road where it was painted white then later relocated back to this site in the 1980s to be used as edging for a driveway access off Main Road beside the former Police Residence where the Police Station originally stood. Evidence of some of this edging remains in place today leading to the replica Police Station. Other blocks were used to define the garden edging in the carpark at the rear of the residence.This lockup used to be located at the Police Station in Pryor Street and was then stored in Youth Road before being acquired for the Local History Centre 3 colour photographseltham, main road, police residence, local history centre, eltham district historical society, courthouse, youth road

Donated by the artist through the Australian Government Cultural Gifts Program, 2017Drawing and erasing instrument: solar and mains power, steel, timber, electric motors, solar panel, stainless steel sire, brass, aluminum, eraser, pen/pencil, stone, bearings, glassgippsland, artwork, permanent collection

This building was damaged by fire and was subsequently demolished before June 1983. From 1901-1917 it was the site of the Surrey Hills Post Office. In later years the part of the building with frontage to Windsor Crescent was used as the dental surgery of Dr David Ellis; the Union Road part of the building was occupied by a barber and tobacconist for many years. At the time of the fire the building was used by a business supplying hydroponics requirements. This moved to (?) 119 Highbury Road, Burwood.The image is significant because it documents a building which was an important community facility which no longer exists.Black and white photo of a single-storey corner building with a corrugated iron roofed veranda and a single, 4-panel timber door. There is a sign with '109' mounted on the veranda of the building. There are multiple advertising signs on the walls of the building. Two of the windows are boarded up with corrugated iron sheets.shops, barber shops, tobacconists, surrey hills post office, dentists, union road, windsor crescent, hydroponics supplies, businesses, union road shops, dr david ellis

Constructed with timber from the wreck of the Pribislaw by3-masted ship modeled on the Pribislaw and constructed from this ship's wood, salvaged in the Shetland Islands. On timber base with descriptive panel. Ship complete with trimmings - German flag, sails, ladders, steering wheel etc.In printed type, cut out and stuck onto the back end of the model ship 'Pribislaw' and 'Hamburg'.maritime technology, model ships, pribislaw, 1849, 1850, german migration, model ship, hamburg

John (Jack) Poppleton was a long-time Albury resident. It seems likely the medals were mounted after his death in 1962 and donated to the 8th/13th Victorian Mounted Rifles Regimental Collection.Collection of medals of an Albury citizen who served in a mounted unit in both the Boer War and WWI.Circular frame containing medal group: Queen's South African Medal with clasps: Transvaal and South Africa 1902; and 1914-15 Star, British War medal and Victory Medal awarded to John Thomas Poppleton a resident of Albury NSW for service in Boer War 1899-1902 and WWI 1914-1918.. Frame is plastic mock timber. Engraved plastic panel fixed to glass cover. 50 Tpr John Poppleton 3rd Imp Bushmen/ 1261 Tpr John Thomas Poppleton 7th LH Regt AIF/ 1880-1962poppleton, medal, albury, boer war, wwi

This baker’s wagon (or cart) was used to transport and deliver bread and other baked goods in the Warrnambool area. It is currently decorated with signwriting advertising H.H. Smith, Baker who owned and operated his Warrnambool bakery in the late 19th and early 20th century. The design of this baker’s wagon is similar to others dating around the 1930’s and 1940’s and was likely to have been built around that time for Stephenson’s Bakery in Warrnambool. The wagon’s original internal shelves were removed due to it being used in the early days at Flagstaff Hill to give children rides around the Village. BAKERS’ HISTORY There were many bakeries in Warrnambool in the 19th to mid-20th century. Each bread bakery made bread deliveries by horse and wagon in their appointed delivery zone. This wagon has sign writing representing Smith’s bakery although it is most likely the delivery wagon of Stephenson’s bakery. SMITH’S BAKERY – as shown on the wagon’s signage Henry Huntington Smith (1857-1941) was born and educated in Warrnambool. He worked at Davis’ steam biscuit factory in Timor Street before he started his own bakery business in 1885 at a premises near the corner of Fairy and Koroit Streets. A few years later Smith built his new bakery on the corner of Fairy and Lava Street where it still stands today as Monaghan’s Pharmacy. The building was designed by James McLeod in 1892 as a bakehouse, shop and residence for Smith The address was known locally as Smith’s corner. Next door to the bakery, at 136 Fairy Street, were Stables built by Jobbins and McLeod in 1886 for William Cust. A photograph in the archives of the Warrnambool and District Historical Society shows the 1892 building with four fancy horse-drawn wagons on the street with white clad drivers and a promotional stand erected with 5 bakers in uniform and the signage “H H Smith & Co, Pastry Cooks and Confectioners”. One of the wagons appears to have “H H Smith” painted on the side. H.H. Smith & Co. placed an Advertisement in the Weekly Times in December 1896 promoting its business as bakers, confectioners and pastry cooks, praising their shop as an ‘ornament to the town’ with ‘neat appointments’ and ‘dainty decorations’. It also boasted that the business supplied a large number of customers within a twelve mile radius of Warrnambool. In November 1919 The Warrnambool Standard announced the marriage of Henry H Smith, Mayor of Warrnambool, to Jeannie Samson-Goodman in East Adelaide. In the same newspaper was a notice that Frank Crossley was to open as baker and pastry cook in H.H. Smith’s premises. As well as being the proprietor of the H.H. Smith Bakery, Henry Huntington Smith was a Councillor for the Warrnambool Municipality from 1913 – 1937 and Mayer for two terms. In December 1919 during his first term as Mayor he was honoured for the work he had done with returning soldiers after World War I, receiving a document in recognition of this work, presented by the Mothers, Wives and Sisters of returned soldiers. Smith was very interested and involved in the community in many roles, including being the Vice President of the first Warrnambool and District Historical Society. STEPHENSON’S BAKERY – believed to be the past owner of the wagon The last owner of the bakery was Harold Stephenson. Stephenson was enlisted in the A.I.F. and was invalided home in 1943 before the end of the Second World War. He also served as a Councillor 1958-1976, during which time he served six terms as Mayor for the City of Warrnambool (1966-1973) while he had the bakery. He was very involved in many local organisations including the Warrnambool Surf Life Saving Club and the Road Race Committee. He died in 1985, lauded as being one of Warrnambool’s “most distinguished civic leaders”. It has been said that the baker injured in World War II invented a special contraption to enable him to get up into the wagon and that he alerted his customers that he was in their vicinity by blowing a whistle. The customers would come out and choose their own bread from the back of his wagon then pay him for it. However another account is given by a man who once earned pocket money by helping the baker on his rounds. He says that it was Stephenson, the owner and manager of the bakery, and not the delivery baker who received a significant injury during the war, making him unable to climb the stairs of his upstairs accommodation at the bakery, therefore causing him to sleep downstairs. At this time in the early to late 1940’s Stephenson’s bakery had three wagons, one for each of the delivery rounds. The wagons were painted black and yellow. Two of the drivers were Stan Lake and Ali (Alec) Dean who both had wagons with the covered cabin design. The third driver was Bill Lake who had a flat wagon. Stan Lake delivered in the area around Lava and Koroit Streets, Ali Dean had another round and Bill Lake had the Dennington area. Bread continued to be delivered into the 1960’s but by this time the delivery vehicles were motorised. The goods produced at Stephenson’s bakery included breads baked in different shaped tins such as High Tin, Sandwich and Vienna. Some shapes were easily divided into half by breaking them apart, therefore the baker could make two quarter loaves from a half loaf, satisfying different needs. There was the option of white or brown bread, sweet buns, fruit buns and Boston buns. The baker’s assistant was known to take great delight in ‘trimming’ the broken halves of excess bread and crust, enjoying his treat. THE BAKERY PREMISES – South east corner of Fairy and Lava Streets, Warrnambool The building retains the original cast iron veranda. Above the veranda a motif of a wheat sheaf in ornamental plaster can be seen. Inside the building there are still has some of the original fittings. The building was classified by the National Trust in August 1979. After the Second World War an official system of zoning was introduced as a fair way for the baking industry to operate. In 1949 different pricing was introduced by the Government for either delivered or retail purchased bread. Many of the small local bakeries went out of business after the Government banned zoning. The way was made open for the larger bread manufacturers to enter the local market with cheaper prices. Some of those companies were Mc Queens, Tip Top, Twisties, Sunicrust, (Mc Queens ‘new’ bakery building was where the current Toyworld shop now stands, is, in the Ozone carpark.) O’Grady’s Bakery, later changing hands and known as Burkes Bakery, was in Fairy Street near Timor Street intersection, on the North West side. There was also a bakery named Almay. The baker’s wagon is significant because of its association with H.H. Smith’s Bakery in Warrnambool.. The H.H. Smith’s Bakery building on the corner of Fairy and Lava Streets, built in 1892, is classified by the National Trust, August 1979. Smith Street Warrnambool was named after Henry Huntington Smith, who was a Warrnambool Councillor 1913 – 1937 and Mayor 1919 – 1921. Baker’s wagon, often referred to as a baker’s cart. Four wheeled horse-drawn delivery wagon, front wheels smaller than rear wheels. Wagon is clad with metal sheets and lined with varnished timber panels. Wheels have metal rims, wooden spokes and rear wheels have wooden brake pads. Horse shaft is timber with metal fittings. Front has a metal lamp holder, brake lever, metal hand grips and decorative metal foot plates. The wagon has suspension leaves on back and sides and double suspension leaves on the front. Driver’s area at front has a roof, glass side windows and wooden box seat with hinged compartment accessing wagon storage area. Door above back of seat has buckled leather handgrip strap attached, door slides open for access to wagon area. Back of wagon has a wooden step and a split door; top door has ventilation louvers, both doors have metal latches. Wagon is painted cream with brown trim and signage and green step. Remnants of red and green paint are visible; underside of seat panel is painted grey. Wagon advertises H.H. Smith & Co. Baker, a Warrnambool business established in 1885, but is of a more modern design seen around 1930’s and 1940’s and most likely belonging to Stephenson's bakery. Brown signwriting on sides of wagon “H.R. SMITH & CO. / BAKER” Brown signwriting across front of wagon “BAKER” warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, great ocean road, baker’s wagon, h.h. smith baker, warrnambool, henry h smith, jeannie samson-goodman, frank crossley, mayor of city of warrnambool, vice president of warrnambool and district historical society, stephenson’s bakery warrnambool, harold stephenson, warrnambool surf life saving club, road race committee, national trust building, stan lake, bill lake, ali dean, 19th and 20th century bakers, davies steam biscuit factory warrnambool, james mcleod building designer, jobbins and mcleod, william cust, h h smith & co, pastry cooks and confectioners, bakery trade, bread delivery wagon

20th Light Horse Regiment serving in a infantry role was posted to Merauke on the southern coast of Dutch New Guinea (now the Indoneasian province of Papua) in 1943. It was the only Australian Light Horse regiment to serve overseas in WWII. Sergeant Adrian Dunne, a native of Tocumwal NSW, was killed in action 12 November 1944. He was aged 25.Rare evidence of the service of the only Australian Light Horse regiment to serve overseas in World War II (1939-45). Timber framed display panel containing Australian Commonwealth Military Forces hat badge (Rising Sun), 'Australia' metal shoulder title, 1939-45 Star, Pacific Star, 1939-45 British War Medal and 1939-45 Australian Service Medal; and Colour patch of 20th Light Horse Regiment, black over gold. Objects are protected by a Perspex front cover sheet. Sgt Dunne's name is spelled incorrectly on the panel.20th Light Horse / Sgt Adrian Dunn / VX81616 Tocumwal / Killed Dutch New Guinea 1943.military, world war two, wwii, dunn, merauke, new guinea

This screen with embroidered and appliqued panels was entered in the First Australian Exhibition of Women's Work 1907, at the Royal Exhibition Building in Melbourne. This landmark exhibition gave women artists and craft workers an opportunity to display their works to a broad audience and gain recognition for the variety and high standard of the works in both traditional and non-traditional fields for women. The embroidery and applique design is based on an original design for a similar object made by British Arts and Crafts Architect and Designer, M.H. Baillie-Scott, which was published in The Studio magazine in the early 1900s,This three-panel draught screen was made by Hilda Leviny in the Arts and Crafts style and entered into the First Exhibition of Women's Work, at the Exhibition Buildings, Melbourne in 1907.Arts and Crafts style three-panel draught screen made from timber(American Oak), linen panels, silk embroidery threads, beaten copper decoration and varnish. The embroidered panels, made by Hilda Leviny, are mounted within the timer framework, depicting a design of birds and trees in the Arts and Crafts style. Pattern Reg. No. 3227.2 and 2503. With copper decoration.hilda leviny, buda, castlemaine, domestic furniture, handcrafts, needlework, art nouveau, 1907, exhibition of women's work, royal exhibition building, woodwork, draught sceen, arts and crafts movement, embroidery and applique

On 19 April 1915, Brighton City Councillor T. Wilson moved to install a roll of honour in the Brighton Town Hall. "The men who had gone to the war deserved all the praise and consideration that could be given them. Nothing could be said too highly in their favour." The Roll of honour was unveiled at the Brighton Town Hall on Armistice Day, 11 November 1928, by the mayor, Cr. H.E. Pullman. It contained the names of the men of the municipality who gave their lives in World War I. A service was conducted by the Brighton Ministers' Association, under the presidency of the Rev. H. B. Hewitt, of St. Andrew's Church, Brighton. The roll of honour was made by H. Goldman Pty, Ltd, a Melbourne cabinet maker and designer who worked exclusively in Australian timbers. The two metal panels/tablets on either side of the honour roll were added at a later date and commemorate those who died in World War II.Polished wood and metal honour board attached to wall in the Brighton Town Hall. The board is a rectangular shape with a semi-circular curved top at the centre. The central section is a dark carved timber Honour Roll for WWI listing the names of Brighton residents who gave their lives in service 1914—1919. To the left and right of the honour roll are black metal panels/tablets that were added at a later date which commemorate those who died in WWII 1939—1945. The central section contains the honour roll of 228 names which are inscribed in gold with black shadow across three panels which are divided by four decorative round columns. The middle panel is arched at the top and under the arch is a decorative wreath in relief containing the City of Brighton crest within it, below which is "LEST WE FORGET" in gold lettering. The top of the left and right wooden panels each have carved decorative eucalyptus foliage and a bow hanging in the middle. A piece of metal with an incised quote "AT THE GOING DOWN OF THE SUN AND IN THE MORNING WE WILL REMEMBER THEM" is attached to the bottom edge of the central section. Below the metal bar on the left and right panels are the dates 1914 and 1919 in gold lettering, and in the centre "TO COMMEMORATE HEROIC & SUPREME SACRIFICE". The cast metal side panels are set back slightly from the central section and contain decorative wreaths at the top and quotes under them. The left panel has the incised inscription "IN GRATEFUL MEMORY OF THOSE WHO GAVE THEIR LIVES IN THE SERVICE OF THEIR COUNTRY IN THE SECOND WORLD WAR 1939—1945" and the right panel reads "GREATER LOVE HATH NO MAN THAN THIS THAT A MAN LAY DOWN HIS LIFE FOR HIS FRIENDS 1939—1945". They have square columns on their far ends and the capital of the columns and top and base decorations mimic the original timber design. brighton, roll of honour, honour board, lest we forget, brighton town hall, commemoration, wwi, world war i, wwii, world war ii, brighton city council, bayside, military, service, war memorial, h. goldman, harry goldman, h. goldman manufacturing company

By grand final day, Geelong was in the midst of a 26 game unbeaten run, and Collingwood posed few problems on the big day. The Cats triumphed by 46 points after a dominant second half. Geelong posted a 16-2-1 record in the home and away campaign and defeated Collingwood by 54 points in the second semi final. Grand final day was a prosession with back-to-back flags wrapped up by three quarter time. Geelong: 4.2, 5.3, 11.6, 13.8 (86) Collingwood: 1.2, 3.3, 5.4, 5.10 (40) Goals: Goninon 5, Trezise 4, Davis, McMaster, Flanagan, Worner 1. Best: Williams, Trezise, Sharp, Goninon, B. Smith, Morrison. Line up: B: Bernie Smith - Bruce Morrison - Norm Sharp HB: Geoff Williams - John Hyde - Russell Middlemiss C: Bert Worner - Doug Palmer - Terry Fulton HF: Leo Turner - Fred Flanagan (cap) - Bob Davis F: Jim Norman - George Goninon - Peter Pianto Foll: Bill McMaster - Russell Renfrey - Neil Trezise Res: Syd Smith - Ron Hovey Coach: Reg Hickey Also played in 1952 Harry Herbert, Tom Morrow, Leo O'Halloran, Noel Rayson, Les Reed, Merv Richardson, Don Scott, Norm Scott, Jack Stevens, Loy Stewart, George Swarbrick, Jim Tuckwell, Tony Walsh, Peter West Information provided by Col Hutchinson GFC HistorianFootball mounted on a timber base. Base is circular with sloped sides with a depressed circle in the top centre. There is a thin rounded stand which supports the top of the timber base which is a flat oval shape. A brown leather football is attached to the top of the timber base. Football is comprised of four individual panels which have been stitched together. One panel is attached to the timber base. A second panel has the SHERRIN logo although this is heavily faded. A third panel has a drawing of a pennant which reads -PREMIERSHIP 1952- above an oval shape with -WON BY/ GEELONG- written inside and the team scores on either side. A fourth panel has the Geelong Footbal Club logo in the centre, the team list on the left and the club officials on the right.1952 Premiership. Bill McMaster. Doug Palmer. Peter Pianto. Russ Renfrey. Neil Trezise. Geoff Williams. Fred Flanagan. Ron Hovey. John Hyde. Russell Middlemiss. Bruce Morrison. George Goninon. Leo Turner. Bert Worner. Bob Davis. Syd Smith. Norm Sharp. Bernie Smith. Terry Fulton. Jim Norman. Reg Hickey1952 premiership. bill mcmaster. doug palmer. peter pianto. russ renfrey. neil trezise. geoff williams. fred flanagan. ron hovey. john hyde. russell middlemiss. bruce morrison. george goninon. leo turner. bert worner. bob davis. syd smith. norm sharp. bernie smith. terry fulton. jim norman. reg hickey, geelong cats, premiership, geelong grand finalists, football

The large plaster Illisos depicted in the back of this image is still held by Federation University Australia. The Ballarat Technical Art School (No. 10) was part of the Ballarat School of Mines and was established in 1907. After conducting classes in various locations around Ballarat a custom built art school was erected on the site of the former Ballarat Circuit Court House, previously used as the initial building of the Ballarat School of Mines. Examples of drawings undertaken by students, as well as some plaster castes are held in the University of Ballarat Historical Collection. The Ballarat Technical art School is the oldest continuous Tertiary Art School in Australia. Sir Alexander Peacock opened the new Ballarat Technical Art School building in July 1915. It cost 10,000 pounds and was constructed by the Public Works Department from plans drawn by the then Art School Principal, Herbert H. Smith. The building contractors were Messrs Gower and Eddards. According to the SMB Annual Report of 1914 'the internal upholstering and fittings have all been carried out in Australian timbers, with Queensland maple largely used throughout.' The building could be described as federation-art deco in style. It features sandstone insertion with sandstone string coursing. The base of the building is rusticated sandstone. The building is functional in design with large metal windows in the south wall to ensure good light into the studios. The northern wall has standard double hung windows. The interior of the building features a carved wooden staircase and cast iron ceiling vents. The rear drawing studios could be made into one large studio by opening panelled timber doors. This opening features classical plaster pilasters with a pediment above. (http://guerin.ballarat.edu.au/curator/buildings/technical_art_school.shtml) Black and white mounted photograph showing eleven students of the Ballarat School of Mines Technical Art School drawing from plaster models of human bodies in various poses and of various scales. The students are in a room of the Ballarat Technical Art School which was custom built for teaching art. The image was reproduced in the 1920 Ballarat School of Mines Students' Magazine. drawing, ballarat school of mines, ballarat technical art school, art studio, plaster caste, gribble building, illisos, hercules, drawing from the antique, visual arts

The former Ballarat Circuit Court Building, later the first building of the Ballarat School of Mines, was demolished to make way for a new custom built Art School building. Sir Alexander Peacock opened the Ballarat Technical Art School in July 1915. It cost 10,000 pounds and was constructed by the Public Works Department from plans drawn by the then Art School Principal, Herbert H. Smith. The building contractors were Messrs Gower and Eddards. According to the SMB Annual Report of 1914 'the internal upholstering and fittings have all been carried out in Australian timbers, with Queensland maple largely used throughout.' Before this building was constructed art and craft classes were held in various buildings around Ballarat. The building could be described as federation-art deco in style. It features sandstone insertion with sandstone string coursing. The base of the building is rusticated sandstone. The relief stone panel on the front with the words "Technical Art School" features stone pilaster brackets and corbels. In the centre front can be seen rectangular sandstone pediment with decorative stonework incorporating the date of construction. The windows in the lower floor feature five supporting keystones whereas the upper windows have sandstone lintels. The building also features decorative cast iron downpipes. The entrance on the northern side has attractive leadlight glazing in an art deco style. Above the door a miner's lamp and pick are featured in the design. The building is functional in design with large metal windows in the south wall to ensure good light into the studios. The northern wall has standard double hung windows. The interior of the building features a carved wooden staircase and cast iron ceiling vents. The rear drawing studios can be made into one large studio by opening panelled timber doors. This opening features classical plaster pilasters with a pediment above.Colour photograph of a sandstone detail on a double storey, red brick building - the Ballarat Technical Art School, a division of the Ballarat School of Minesballarat school of mines, ballarat technical art school, architecture, art, gribble building