Found in the Curator's Cottage, renovated by Robert James before donationLarge timber tripod with means of attachment for dumpy level (but not B24.0049). See B91.126 for photograph of tripod in use by a student.surveying equipment, students, landscaping, dumpy level

Used with the Plane Table - Item 4130, in surveying classes at Ballarat School of Mines. Item 4127, Tripod Location Chains, may also have been used.A large tripod of timber construction. Concave top mount flange to receive matching spherical spigot. Spacer block halfway up each twin-strut leg.In white paint on the top "PTI" Manufacturer's stamp on each leg - circular. "W.& L.E. GURLEYtripod, surveying, scientific instrument, ballarat school of mines, plane table, location chains, w & l e gurley

Three legged timber adjustable tripod with metal conical feet and metal tellurometer base fitmentEngraved number - 150517 on legs, Adhesive label with "Australian Survey Office" with written number A404 21tripod, tellurometer

Surveying instrument accessories. Two sets. Used in conjunction with item 4129 - Collapsible leg surveying instrument, tripod. Could also be used with item 4130 - Plane Table which goes with the tripod mentioned.A set of three steel discs, connected in star configuration by three brass chains of equal length. Used to contain tripod ends on hard smooth surfaces.surveying, metal, steel discs, scientific instruments, location chains, plane table

Tripods similar to this were used in both WW1 and WW2. Note: Item 6482 is a Heliograph that was mounted onto a tripod such as this when it was used for surveying.Tripod with wooden legs painted in jungle green. The legs are attached to the apex with tarnished brass fittings, each secured with brass screws. Metal reinforcing plates protect the pointed end of each leg. A brass plate sits at the apex with a threaded rod positioned to allow the attachment of a heliograph or signal light. A khaki webbing shoulder strap for carrying the item is secured to one of the legs. At the bottom end of the strap is a webbing loop used to secure the tripod legs when closed. Stamped on one wooden leg: '15629' Stamped on the top plate: 'D(upwards arrow)D, 0 with an upwards arrow through it, 3(upwards arrow)0' Stamped on one brass leg fitting: 'STAND LAMP OR HELIO A MKlll'military equipment - army, heliograph, signals

This tripod was used to measure the height of distant points relative to a known point used in surveying and construction. The older levels consist of a telescope fitted with a spirit level and, generally, mounted on a tripod. Modern levels are automatic.This tripod was used in the Kiewa Valley by a Mt Beauty resident.Wooden tripod with pointy ends and with metal hinges at the top to collapse. It has a leather strap attached by a button press stud towards the pointy end. This is to enable the legs of the tripod to be fastened together. cowley tripod; surveying; kiewa valley;

This tripod is part of the Cirkut Camera set used by William Anderson in Lorne A collapsible wooden and metal tripod. On top of the three legs is a circular geared metal plate with numbers surrounding it. On top of this is a metal plate with piece of wood and screw to attach the cameraCrown Tripod number 2 patented June 23 1903, Folmer and Schwing, Rochestercamera, lorne, william anderson, tripod

This tripod is part of the Cirkut Camera set used by William Anderson in Lorne A collapsible wooden and metal tripod. On top of the three legs is a circular geared metal plate with numbers surrounding it. On top of this is a metal plate with piece of wood and screw to attach the cameraCrown Tripod number 2 patented June 23 1903, Folmer and Schwing, Rochestercamera, lorne, william anderson, tripod

Tripod with 3.5 cm male thread tiltable mount (to suit Level CS - 147, 4110.) Wooden legs.surveying, tripod

Penny SCOTT Penny Scott was a Post Graduate student in Ceramics at Gippsland Campus. Ceramic low salt fired ceramic form on a tripod stand.ceramics, gippsland campus, jan feder memorial ceramics collection, penny scott, alumni

Handbook for the .303-IN Vickers Machine Gun and Tripod Mounting, Mark IV 1930 Supplement 2.Handbook used by Military Personnel in relation to the .303-IN Vickers Machine Gun and Tripod Mounting, Mark IV.A small oblong book buff in colour cardboard outer cover.On the front cover in pencil Capt W.A. Cronk 59 Bn. On the front cover in ink B.W. Pulver.machine gun, tripod mounting, mounting

This photograph shows the start of building workers huts at the mine site, with a tripod set up to lift the building components...An interesting collection of photographs, the connection to Greensborough remains a mystery. Digital copy of black and white photograph, one of 30 photos of mining operations. Photos have no markings or dates. Donor unknown.tasmania, mines and mining, mining machinery

The Heliograph MkV is a fascinating piece of historical surveying and communications equipment. It was primarily used for visual signaling by reflecting sunlight with a mirror to send coded messages over long distances. This method was primarily useful in remote areas where other forms of communication were not available. The MkV model, specifically, was widely used by the British Army and other military forces from around 1906 until the mid 1960s. It remained in use with the Australian Army Survey Corps until the mid 1980s. The device typically included a 5 - inch mirror and was often mounted on a tripod for stability. Initially the instrument was used to communicate between survey stations using Morse code to coordinate their activities. Later when better forms of communication were available, they were used for precise angle alignment where the sunlight reflection from the mirror was targeted between the survey stations to give very accurate results. The MkV was relatively light weight and portable, making it ideal for use in the field. It could be setup and adjusted quickly. The heliograph had an adjustable mirror that could be tilted to reflect sunlight towards a distant receiver. Surveyors could align the mirror using a sighting device. Whilst it was primarily used by the Military it was also used in civil surveying particularly in the remote areas of Australia. The British Army Mark V version uses a flat round mirror with a small unsilvered spot in the centre. The sender aligned the heliograph to the target by looking at the reflected target in the mirror and moving their head until the target was hidden by the unsilvered spot. Keeping their head still, they then adjusted the aiming rod so its cross wires bisected the target, they then turned up the sighting vane, which covered the cross wires with a diagram of a cross, and aligned the mirror with the tangent and elevation screws, so the small shadow that was a reflection of the unsilvered spot hole was on the cross target. This indicated that the sunbeam was pointing at the target. If the sun was in front of the sender, its rays were reflected directly from this mirror to the receiving station. If the sun was behind the sender, the sighting rod was replaced by a second mirror, to capture the sunlight and direct it onto the main mirror to reflect it to the receiving station.. 1 Brish Army "Mance" Mk V A253 Heliograph has two 125mm diameter mirrors on a brass arm with targeting attachments. The Instrument is mounted on a three-legged tripod of brass and mahogany with spiked feet, approximately 1.2 metres high. The instrument was made by LUCO Art Metal Co Ltd, London in 1940. .2 A military green metal carrying safety storage case with khaki shoulder strap.A253 stamped on instrumentroyal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

Heavy metal tripod stand with three knobs and two adjustable holders.On tripod base: 'MET. RES'retort stand, scientific apparatus, scientific equipment

Used at the Ballarat School of Mines in Surveying classes. It was used in conjunction with Item 04129 - Collapsible leg surveying instrument, tripod, and at times with Item 4127 - Tripod location chains.A wooden platform used in surveying equipped with a 2.7 cm diameter dowel at each end that would hold the charts/papers in position. A spherical mount on the underside, designed to match the receptacle on top of the tripod - Item 04129.Manufacturer's stamp underneath.plane table, surveying, w. & l.e. gurley, scientific instrument, ballarat school of mines, tripod, location chains

A cream coloured cardboard cover with black information of the front. At the top of the cover reads TM9-1000-205-12 and under this reads Department of the Army Technical Manual. There are three punch holes down the left hand side and the manual is in a clear plastic over for protection.united states - armed forces - service manuals, operation and organizational maintenance, 106mm recoilless rifle

A tellurometer on a tripod. the tellurometer is a box shaped with a black front with severla dials and guages on it. the colour of the box is green. There is also a carry handle on top of the box. The Tellurometer is positioned on a three legged tripod131 division, tellurometer, tripod