This RAAF dress uniform and other associated article of clothing was owned by Walter Alexander Scott. Joined RAF December 1940 to be trained as a pilot, he got his wings December 1941, became a night fighter pilot after OTU and posted to 219 Squadron. Was posted to 603 Squadron December 1942 flying Beaufighters on coastal command convoy escorts, desert patrols, supporting Sicilian and Italian invasions (all from the N.African desert, then on Greek Island " Armed Rovers" until 10 November 1943, just at the end of ops, when he was shot down in the Aegean Sea and became a POW the next day 11 November 1943. Transferred to Germany he was in Stalag IVB for 3 months, before exchanging ID with an Irish soldier ,in order to get out of the main camp into a working sub-camp in order to escape. Post war Walter returned to Australia, he became "Citizen of the Year" in Werribee 1992 for his service to the community. In 1993 he was awarded the Order of Australia Medal for services to youth and to the retired.

Inside label states manufactured by Koru Collection New Zealand.

Manufactured by C.G.C.F

Manufactured by Fletcher Jones.

An original piece of SECV Uniform.HighA bottle green, SEC uniform jacket. The jacket is single breasted, with four bronze buttons pressed with State Electricity Commission of Victoria lettering and shield. The jacket has two hip pockets, the opening lower edge of which is reinforced with a brown leather band. There is a small upper right breast pocket. The sleeve cuffs are reinforced with a brown leather strip. The jacket is fully lined in a black cotton cloth.The makers label inside the RH front bears the manufacturer - Blazer and Uniform Specialist - David Lack Pty. Ltd. The Recipient name is F. Scruse.secv, state electricity commission of victoria, uniform, jacket, ballart tramway

An original piece of SECV Uniform.HighA bottle green, woollen, SECV Uniform Jacket. The jacket is single breasted and fastened with three, metal, State Electricity Commission of Victoria buttons with lettering and shield insignia. The jacket front hemline is curved at the lower edge of both RH and LH fronts. The jacket features a breast pocket, and two hip pockets, the lower openings of each hip pocket being reinforced by a panel of black leather. The sleeves are similarly finished in black leather stripping. There are two internal pockets, and the jacket is fully lined in black cotton cloth. The jacket does not have a makers label.state electricity commission of victoria, tramway uniform, uniform jacket

Black Officer Dress Uniform Jacket with Belt on rearCGCF (Commonwealth Government Clothing Factory) Brass Lapel Badge UBIQUE (Everywhere in Latin) 5 Front of Jacket Brass Badges (2.5cm) Epaulette with First Lieutenant insignia Cloth Belt rear

Clothing, khaki woollen WW2 army uniform jacket. Single breasted with four brown metal AMF buttons (2 cm). Two breast pockets, (16 X 18 cm) with fold over tabs. All button tabs fastened with 1.5 cm metal buttons. Long sleeves with stitched down cuffs with V shaped peak on upper side. Both sleeves lined with cream and blue striped cotton fabric. 30 cm split at centre back from hem. Button down epaulettes on each shoulder with three captain's pips and two black stripes. Cloth badges on top of each sleeve. 1. Navy and red unit colour, (3 cm X 2.5 cm). 2. Light green, brown and blue colour (5 X 5 cm) (unknown). 2.5 X 2.5 cm square metal badges on each corner at front of collar. 5.5 cm wide cloth belt with metal buckle. Belt attached on side seams at waist by leather tabs threaded through belt keepers and fastened with 1.5 cm buttons. Cap belonged to John Kenneth Martin, padre in 2nd Australian Corps AIF. Served overseas as a Chaplain from 1940-1945. Old box 314Y.Name tag stitched under collar, and inside back '' J.K.Martin''.costume, military, army uniform jacket ww2

An original set of SECV uniform pants and jacket.HighA bottle green, wool twill, jacket and pants. The jacket is single breasted with collar and lapels. There are three metal pressed buttons fastening the front, featuring State Electricity Commission of Victoria lettering and shield insignia. There is a LH breast pocket, and both left and right hip pockets. The lower edge of the hip pockets are reinforced with brown leather stripping. The cuff edges are also protected with brown leather stripping.The jacket edges on both LH and RH sides are curved. There is one internal pocket with a makers label. The pants feature a double pleat at the front waist, and side pockets, a fob pocket and a backpocket with button and security loop. There is a buttoned waistband and zippered fly. The makers label is for David Klein Pty. Ltd of 22 Patrick St., Melbourne - 323771. The recipients name is D. McGregor, SEC Ballarat, O/N DI 325903state electricity commission of victoria, tramways uniform, uniform pants and jacket secv

Navy Officers jacket. Black Woolen Serge. Five Brass Buttons to front One button in RHF pocket. Australia Patch to both Shoulders. Bullion Rank to cuff of both sleeves. Black cotton lining. Sleeves not stitched to length as yet. Makers lable Wise of Melbourne. uniform jacket., royal australian navy,uniform., buttons all brass

This particular Jacket was issued to VX 33678 Bdr E. O'Shea.Bdr O'Shea served during WW2Khaki Wool cloth Jacket, four patch pockets on the front of the Jacket. The Jacket has two 'Australia' shoulder titles on the epaulets, one only small (king's Crown) rising sun badge on the collar, six small buttons, four small buttons with King's Crown, map of Australia and embossed Australian Military Forces. One small button at the collar. On the right and left sleeve are the colour patch of Artillery. On the right sleeve is the badge of rank of Bombardier and four blue service chevrons. Inside the Jacket hand written OSWR. Makers Tag - Freedman & Co Pty Ltd. 1941. Size 6. Name Tag - Regimental No VX33678. Name Bdr E. O'Shea. uniform, jacket, service dress, khaki, amf

Uniform Jacket belonging to C? L Taylor who served in the Royal Australian Navy.The is a uniform jacket of C? L Taylor.Navy Blue Cloth Jacket with buttons attached, inscribed Australia. The Jacket has badge of Rank on the left sleeve, badge of Trade on the right sleeve and three red markings for period of enlistment.Inside the Jacket the name C?L Taylor.ran, aif, military, c? l taylor

SECV Uniform Jacket - dark green cloth, lined with black cloth on inside and striped white cloth inside sleeves. Fitted with 4 silver large SECV uniform buttons on front, shoulder epaulets each fitted with small SECV uniform buttons, leather trimming on large pockets and ends of arms. Jacket fitted with four pockets - two side, one small top left and one large inside right. On top of inside of coat, "David Lack Pty Ltd. Melbourne" label, that can be used as a hanging point. On the inside right pocket, white label, with red and black printing, giving name of manufacturer and space for Name and Number. Typed for "T. Dunstan." and "926".ballarat, inspectors, uniforms

An original set of uniform.HighA bottle green, wool twill, jacket and pants worn as SECV Uniform. The jacket is single-breasted with collar and lapels. The front is buttoned with four State Electricity Commission of Victoria metal pressed buttons with lettering and shield insignia. These are matched by two smaller, identical buttons at the shoulder holding the epaulettes in place. There is a LH breast pocket, and hip pockets on both LH and RH front panels. The hip pockets are backed and edged with black leather stripping for reinforcement. The sleeve cuffs are also reinforced with a band of black leather. The internal pocket on the RH side front has a makers label. The jacket is fully lined with a black cotton lining. The trousers have pockets at the sides, and a fob pocket and back pocket. The trousers have a zippered fly and waistband which is fastened with a hidden button. Belt loops finish the waistband. The makers label inside the inner pocket reads"Blazer and Uniform Specialists - David Lack Pty. Ltd Melbourne. The recipient is D. Kellet No. 3805.state electricity commission of victoria, ballarat tramways, tramways uniform, uniform

The jacket was issued to Private Edgar Uebergang, a member of the 8th Australian Infantry Battalion, who served in WW2 with the battalion. Edgar, who had been awarded a Military Medal during WW2, who went to London with Private Frank Partridge VC and Sergeant Norm Strange from Ballarat representing the 8th Battalion at the 1946 Victory Parade. The Jacket is an Australian Army 2nd AIF khaki woollen Service Dress jacket. On the top of each arm there is a cloth AUSTRALIA shoulder flash, a small 8th Battalion AIF Colour Patch and the Australian Victory Contingent cloth badge. On the lower right sleeve is a blue three-year war service chevron badge. On each collar is a Rising Sun badge.uniform, jacket, ww2, 8th battalion, australian victory contingent 1946

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tunic (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary uniform. Service Dress is approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The Tunic consists of a jacket has a lapel collar, with two external chest pockets and exposed pocket flaps, two side jacket pockets with external flaps and two internal jacket pockets positioned just below the external chest pockets. There is a crescent shaped cloth badge 'AUSTRALIA' sown at the side/top of each sleeve and Squadron Leader - rank stripes sown around each sleeve on the upper wrist area. The Tunic is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. Maker: Australian Government Clothing Factory (A.G.C.F.) - Coburg Victoria The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

Uniform belonged to Clarence Blood This uniform was worn by Clarence Blood in his service in northern Australia. Clarence was a trainee at the AA&GS Nhill Uniform coat and trousers with Safari Pith Helmut, British karki colouruniform, khaki, helmut, pith helmut

Royal Victorian Regiment WO2 JacketPost WW2 jacket with Parachute Qualification BadgeWoolen Serge Battle Dress. Royal Victoria Regiment /White over red. Right upper sleeve- Parachute Qualification, Lower both sleeves WO2. Which is Warrant Officer Class Two. Five buttons to front of jacket, Belt and buckle does up on RHS, Makers tag with personal name of Piggott, South Australian Lable, Date 1968. Class 8505-66-025-6422. Size 41/42 PR Length 74cm. In sleeve, Length of sljacket army

This jacket is part of an official uniform by Sister Danson (VFX151507) during the British presence in Japan following the end of the Second World War. About 16,000 Australians served in the British Commonwealth Occupation Forces, including 130 from the Australian General Hospital with whom Sister Danson presumably served. Sister Danson was born in Numurkah and served as Leiutentant with the Heidelberg Military Hospital before embarking for Japan in 1947.One grey linen single 3 button breasted coat. 2 button pocket. 2 buttons on each sleeve. 2 shoulder flash buttons with 2 pips on each. 2 Australia 1 occupation forces lapel. Shoulder pads 10 moth holesmilitary, british commonwealth occupational forces, sidter danson, vfx151507, ww2, wwii, world war two, world war ii, world war 2, second world war, australian general hospital, heidelberg military hospital

Peace Time (1971) Navy CommodoreBlack Wool. Royal Australian Navy. Commodore Mess Jacket. Gold Lace Rank to both Lower Sleeves. Gold Buttons (8). Gold Thread Australia to both shoulders. Two Fob Pockets to Front. Black cotton lining. Pocket to left hand inside Australia to both shoulders. Inside left of jacket J.N.Crosthwaite. (John Nevil) C.G.C.F. Which is Commonwealth Clothing Factory. R.A.N. Which is. Royal Australian navy. Made in australia. Gold Circular Rosette 4.5cm dia. Width of Gold Laceing. 4.5cm. Two Jacket buttons Link with metal link. Black cotton lining in side. Lable to Collar C.G.C.F.uniform, royal australian navy, commodore

Part of a jacket worn by Sister Danson (VFX151507) during the British presence in Japan following the end of the Second World War. About 16,000 Australians served in the British Commonwealth Occupation Forces, including 130 from the Australian General Hospital with whom Sister Danson presumably served. Sister Danson was born in Numurkah and served as Leiutentant with the Heidelberg Military Hospital before embarking for Japan in 1947.This belt is part of a complete uniform set held by the Shepparton RSL. The uniform has representative and historic significance as an example of the style of uniform worn by nursing staff of the Australian General Hospital during the 1940s and into the 1950s. The uniform set has social significance to the Shepparton area, being owned and worn by a serving community member who was born in Numurkah, enlisted in Shepparton and returned to the community in later life.Grey fabric belt fastened with a metal buckle; belt is held in place with two fabric loops on either side of the waist.second world war, world war ii, medical, wwii, nurse, women

This jacket is part of a Royal Australian Army Ordnance Corps uniform. The Royal Australian Army Ordnance Corps (RAAOC) is responsible for various logistics and organisational operations, such as maintenance of parachutes, fuel distribution, personnel administration, exlosive disposal and laundy operations. The jacket was manufactured in 1968 and was worn by an unknown RAAOC serviceman. The patches on his sleeves denote that he had earned qualifications as a parachuter and a marksman and that he was a Warrant Officer 1. Due to the period of manufacture it can be presumed that the serviceman whom this uniform belonged to served Vietnam War.As an historic military uniform dating to 1968, it is presumed that this item would have been used in service during the Vietnam War. The wearer of the uniform is unknown, however the patches and flashes attached signify that the serviceman worked for the Royal Australian Army Ordnance Corps, earned qualifications as a parachuter and marksman and ranked highly as a Warrant Officer 1. The item is representative of a type of uniform worn by high ranking RAAOC servicemen during the 1960’s. It is also in very good condition for its age.A khaki coloured waist length jacket which is composed of a heavy fabric. The jacket fastens with five buttons down the front and a buckle. The buttons are composed of brown plastic and the buckle is a dark grey metal. The buckle is attached to a waistband on the right-hand side which loops around to a strip of fabric on the left-hand side which passes through the buckle. There are two breast pockets, one on each side of the chest. The right breast pocket is fastened with a brown plastic button and the left breast pocket is missing its button. Each pocket has a flap of fabric which covers the button area. The jacket has a collar and an epaulette on each shoulder which are each fastened with one brown plastic button. There is a ribbon of fabric on the interior of the collar with no inscriptions. There are identical crescent shaped red patches on each shoulder, each showing the words in navy blue stitching "Royal Australian Army Ordinance Corps". The upper right sleeve has a khaki coloured parachuting qualification patch, which depicts an air balloon in white stitching, with wings on either side in light blue stitching. The lower section of each sleeve has a Warrant Officer First Class khaki coloured patch. This depicts a shield in red, black, white, blue and gold stitching in the centre which sits beneath a gold and blue striped line and a gold star. There is a gold kangaroo to the left of these motifs and a gold emu to the right. Beneath these motifs there is a ribbon in white, blue and gold stitching with the word "Australia". In addition there are curvilinear green decorative elements with yellow flowers on their ends. The left-hand sleeve also has a brown marksmen qualification patch. This depicts two crossed rifles in white and brown stitching. There is a white label with printed inscriptions on the interior of the left breast pocket. There is also a band of fabric on the interior back waist band which has three button holes.Printed in black inscriptions on the white label: E.W. PTY/LTD. SOUTH AUSTRALIA 1968 (a broad arrow) Class 8405-66-025-641 Batch A.W... Mill (the ‘A.W...’ is in stamped purple ink and there are some other purple inscriptions that are difficult to decipher) SIZE OF CHEST 39/49PR MATCHING TROUSERS 37 PR DRY CLEAN ONLY CREASE UPPER HALF OF LAPELS ONLY NAME..... ARMY No..... (the number 40 is also wrtten in faded black ink in the top right corner of the label)military, jacket, army, raaoc, royal australian army ordnance corps, parachuting, marksman, warrant officer, uniform

This Summer Mess Dress Jacket was made in 1990 there is no information to who is was issued.The Jacket would have been when attending formal mess events during summer. White Jacket with Sergeants Insignia.There are no inscriptions or markingssummer mess dress jacket, australian army, 1990

The Jacket would have been made circa 1950's and belonged to a member of the RNZ Artillery.This Jacket belonged to a Captain of the RNZ Artillery.Khaki Service Dress Jacket, pure wool Garbardine, two pleated breast pockets, two pleated map pockets, synthetic lining.Captains badge of Rank, all buttons RNZA, lapel Badges RNZA, Shoulder Patches blue with red writing Royal New Zealand Artillery, on the right sleeve Black Colour Patch and a Parachute Patch. There are six ribbons of decorations above the left breast pocket. There is a fine leather plaited lanyard - light brown - through the right epaulette and the end placed in the right breast pocket.rnz artillery, captain

The Colour patch is wrong for the uniform and date time..1) Jacket - long sleeved thick wool. Darkened copper buttons. AMF Motif, on collars is a CMF dark rising sun, on shoulder epaulettes is metal "Australia" Badge. It has four pockets. On shoulders are an oval shaped colour patch, purple over red (38Bn). .2) Trousers - long Khaki wool. Two pockets - metal buttons cuffless trousers. 2) Number "62286 Gregory” Inside waist line, has number “32”, handwritten on it.winter dress, uniform, army, passchendaele barracks trust

This uniform was worn by Bernie Farley, present secretary of Warrnambool RSL (2019). The uniform was made by Fletcher Jones & Staff, Warrnambool in 1998.Jacket with four pockets each with metal button fasteners. Four front metal button fasteners. One inside pocket . Regimental badges on lapels, Badge over right pocket. Epaulets with metal buttons, a crown and Australia. All metal buttons engraved with army insignia. Front metal button fasteners secured with safety pinsTag inside (left) FLETCHER JONES VICTORIA 1998 Arrow signifying govt. NAME. SERVICE NUMBER. 70% Wool, 30% Polyester, DRY CLEAN ONLY (A) Warm Iron ZC804B AR0003army uniform, military uniform, warrnambool ex service

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tie (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: Austal

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Working Dress (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The short waist length jacket consists of a jacket has a lapel collar and zip front, with two external chest pockets and exposed pocket flaps, There are portlets on each shoulder that are fastened with a black plastic button. This button has a crown over eagle in flight on the front. Rank slides are slid onto these portlets and this jacket has Squadron Leader rank slides on the portlets. is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. The waist belt is part knitted on the sides and cloth on the front and rear. There is also one interior pocket on the right side below the exterior breast pocket. Maker: Australian Defence Industries The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.