All members were in a Wireless Patrol car when shots were fired at the car during a pursuitValor Badge Awards ceremony, circa 1942. L to R: S/C Herbert 6364 W.P.; Const Stanesby, 9226 W.P.; McIlwaine 9399 W.P.; Runting 9534 T.B.; Suttie, 9556 W.P.transport branch; wireless patrol; motor police branch; motor traffic section; valor badge awards; runting, alan lindsay; walker, benjamin harold; suttie, desmond john; stanesby, george herbert; mcilwaine, james alipions

1958 Dennis Brothers "F2" Series, 600 gallons per minute, Heavy Pumper.Registration GSR 540, "MFB" lettering on body sides, "Dennis" badge on bonnet.car, brigade, 1958, mfb, fire, pumper, dennis, 8, pump, metropolitan

This tie was given to Murray and Eva Noble of Boisdale by Jack Brabham in 1968. Their family donated it to The Maffra Shed for auction by Bill Welwood during a visit to the Vintage Drivers' Club to the Gippsland Vehicle Collection for a dinner at The Maffra Shed in 2005. Anne Phillips was the successful bidder and donated it to the Gippsland Vehicle CollectionDark green terylene man's tie with 4 Brabham white and red badges one concealed woven in it, made of polyester fibre.brabham jack, motor racing, racing car design

Electric Motor driven automotive horns were commonly used from circa 1915 to circa 1935 on cars, trucks and some tractors They make a distinctive deep and loud 'Ahooga' growl sound. Commonly used on American made automobiles, but also on a few European makes.Car horn: 'North East Electric Co' Electric Motor Driven , 12 Volt made by North East Electric Company of Rochester, New Jersey, U.S.A. 1920's When horn button, usually on top of steering wheel, is pressed, the current activates the motor, which turns on a toothed ratchet, producing a 'Ahooga' sound, which is greatly magnified through the trumpet at the front.Brass badge, acid etched: "North East Electric Co./ Rochester, New Jersey/Pat Pen/Model X/Volt 12/Serial No"; with 'North east Electric' logo on leftcar horn, vintage car horn, klaxon horn, motor driven horn

This cable tram Gripman’s badge, or driver’s badge, was part of a tram driver’s uniform. The inscriptions on the front of the badge identify it as belonging to Gripman number 14, at the South Melbourne Car House depot of the Tramways Board. The Gripman Badge would be re-issued whenever another Gripman takes over the position. Cable trams were invented in America in 1873. In Melbourne, cable trams were in use from 1885 until 1940, with a network of up to 1200 cable cars or 'dummies' and trailers travelling at around 9.5 miles (15km) per hour along 46 miles (74km) of double tracks. The Gripman drove the dummy car, operating the heavy levers to connect the gripping gears to the cable installed in a slot in the road. To turn at intersections he would skilfully disconnect, freewheel around the corner and carefully reconnect to the continuously operating steel cable. Large winding gears in an Engine House along the line pulled the cable along, powered by steam engines and later electric engines. The gripping gears were in the centre of the car's floor with seating all around the sides, a dangerous place for curious children. , whose worried parents would guide them into the tram that was towed behind the dummy car. The Melbourne Tramways Board operated the cable trams between July 1916 and November 1919 after taking over from the privately operated Melbourne Tramway and Omnibus Company. In 1919, the Melbourne and Metropolitan Tramways Board (MMTB) took over the Tramways Board. Stokes & Sons: - The maker of the badge, Thomas Stokes, migrated to Melbourne from Birmingham in 1854 and set up business in Mincer Lane as a die-sinker, producing medals, tokens, buttons and silverware, and an engraving service. He moved to Flinders Lane in 1856. After a time, in 1894, the business became Stokes & Sons Pty: Ltd, electroplates and badge makers at Post Office Place in Melbourne. The maker's mark 'Stokes & Sons' was made on badges until 1962. LOCAL CONNECTION: -t was common practice to recycle the used cables from the tramway. For example, the Wollaston Bridge in Warrnambool, Victoria, is suspended by recycled cable tram Melbourne. (Other recycled cables were used for fencing wire.) -Portland's cable tram is an example of the cable trams used in Melbourne from 1885 to 1940.This badge was used to identify a Gripman who operated a cable car tram's dummy car for the Tramways Board in Melbourne between 1916 and 1919. It represents the need for people to be able to identify workers in the service industry, a need still addressed today by staff ID badges and digital identification. The badge also represents the period in Melbourne's history when cable cars were used for public transport for over four decades, gradually changing from steam to electric power. Trams still have an important role in Melbourne's public transport. Badge, round hollow metal dome with two open metal guides on the back. A cable tram Gripman (driver) badge with embossed inscriptions on the front and stamped on the back. There is a logo of entwined letters T and B on the front. It identifies Gripman number 14, South Melbourne, Tramway Board. It was made by Stokes & Sons of Melbourne. Impressed into the front: "S / 14 / M" "GRIPMAN" Logo intertwined "T" and "B" Embossed on reverse "STOKES &o SONS"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, badge, gripman, stokes & sons, numesmatics, tramway, tram, tram driver, uniform, cable tram, identification, cable car driver, tramway board, south melbourne, melbourne tramways board, tb, mtb, mmtb, melbourne and metropolitan tramways board, tramway button, gripman button, id, identification badg, staff badge, name badge, employee, grip car, dummy car

his medal was issued for schools to commemorate the Queen visit. The Queen visited Victoria from 24 February to 9 March 1954. In 1954 Queen Elizabeth II became the first reigning monarch to tour Australia. She arrived in Sydney with her husband the Duke of Edinburgh on 3 February 1954 and departed the country from Fremantle on 1 April. The visit was tremendously popular. The attractive young Queen was the first royal to tour Australia in twenty years. She graciously endured a gruelling schedule of 33 flights, covering 10,000 miles by air, and 207 car trips, covering 2,000 miles by road and taking 130 hours. She visited approximately 70 country towns, all capital cities except Darwin, and made about 100 speeches.Medal BadgeEIIR Royal Visit 1954 Victoriaroyal visit 1954, badge, victoria, children

St Christopher medallion: The back has a car driving on the road and tree in the picture. The front has St Christopher with the inscription 'St Christopher. Box 625'St Christophernumismatics, badges - civil, st christopher medal

Used by country based ambulance officers to gain emergency access to buildings or cars when attending patients. Source Chas Martin AHSV curator 2 November 2016.Metal hand held axe with brown handle, red centre section and ambulance Maltese cross badgeAMB 11

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Collection of photographs showing early evolution of an armoured regiment of the Citizen Forces as it progressed from WWII equipment and uniforms to post-war equipment and uniforms. Silver regimental hat badges are worn in place of Rising Sun badge.Black and white photograph of Staghound Armoured Car wheel-hub deep in flood water' 1956 Staghound Armoured Car settling. Exercise in Chiltern/ Rutherglen area. "

8/13 VMR was equipped with Ferret Scout in 1959. The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Collection of photographs showing early evolution of an armoured regiment of the Citizen Forces as it progressed from WWII equipment and uniforms to post-war equipment and uniforms. Silver regimental hat badges are worn in place of Rising Sun badge.Black and White photograph of Ferret Mk11 Scout Car parked in front of a building at Puckapunyal

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Collection of photographs showing early evolution of an armoured regiment of the Citizen Forces as it progressed from WWII equipment and uniforms to post-war equipment and uniforms. Silver regimental hat badges are worn in place of Rising Sun badge.Black and White photograph of White Scout Car heavily bogged on exercise in Chiltern Forest. Four so;diers digging the vehicle out." 1956 White Scout Car bogged in Chiltern area. "

The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Collection of photographs showing early evolution of an armoured regiment of the Citizen Forces as it progressed from WWII equipment and uniforms to post-war equipment and uniforms. Silver regimental hat badges are worn in place of Rising Sun badge.Black and white photograph of Staghound Armoured Car heavily bogged on exercise in Chiltern Forest near Albury. Has formation sign of 2nd Armoured Brigade on right mudguard." 1956 Staghound Armrd ( sic ) exercise in Chiltern / Rutherglen area "

Collection of photographs showing early evolution of an armoured regiment of the Citizen Forces as it progressed from WWII equipment and uniforms to post-war equipment and uniforms. Silver regimental hat badges are worn in place of Rising Sun badge.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of White Scout Car bogged in bushland: soldiers digging it out." 1956 White Scout Car bogged in Chiltern area. "

Collection of photographs showing early evolution of an armoured regiment of the Citizen Forces as it progressed from WWII equipment and uniforms to post-war equipment and uniforms. Silver regimental hat badges are worn in place of Rising Sun badge.Unique collection of photographs showing the first years of an armoured regiment of the post-Second World War era Citizen Military Forces showing equipment, uniforms, training and social activity and some personalities.Black and white photograph of Armoured Car bogged on side of road. Tactical sign of 2nd Armoured Brigade on right mudguard." Staghound Armoured car 1956' Exercise in Chiltern/ Rutherglen area."

In 1964, 8th/13th Victorian Mounted Rifles was equipped with wheeled armoured vehicles. Ferret Scout Cars and White Scout Cars. Crewmen wore black tanksuits, boots, gaiters, black webbing belts, black berets with 8/13 VMR hat badge.Collection of photographs showing an armoured regiment of the Citizen Forces in the 1960s as it transitioned from wheeled armoured vehicles to tanks to M113 armoured personal carriers.Black and white photograph of crewmen lined up in front of armoured vehicles on parade ground at Buna Barracks, Victoria Street, Albury. Corporal Graeme Redman closest to camera" Buna Barracks 1964 "

Set of three adhesive label or car sticker with images of 1 -- Shoulder patch of the United States Marine Corps - made by Mitchell 2 - ditto - 1st Marine Division - with the word "Guadalcanal" vertically - made by Mitchell 3 - ditto - 11th Marines - The Cannon cockers - made by Vanguard of California. Donated to the Museum by the son of US Marine whose father was at Victoria Park, July 2018, - noting that they were badges or insignia of the units that were in Victoria Park during 1943. Refer to https://www.ozatwar.com/usmc/1stmarinedivision.htm - accessed 18/1/2019 which confirms the items being at Victoria Park. tramways, trams, world war i, victoria park, ballarat

Yields information about the early staff of the Electric Supply Co. of Victoria following the electrification of the tramways and their appearance.Laminated Black and white print from a copy negative of a group of ESCO employees (motormen conductors and pointsboys?) in front of the tram depot with tram cars 17, 10 and 2 behind. All wearing uniform hats, but not all wearing full uniform (no badges but wearing ties - possibly temporary or casual staff - c1906 - 51 people. Print from a copy negative (N13), made early 1997 for display purposes and laminated. Has four Velcro dots on rear. Trams have destination boards fitted to the tram above the roof. 2nd copy - unlaminated added 29/7/2007 from Alan Bradley 5/2007. See also related documents for Museum Vic information on their copy. See reg item 8497 for a block mounted version.trams, tramways, esco, employees, group photo, tram 17, tram 10, tram 2

Black and white print from a copy negative of a group of ESCO employees (motormen conductors and pointsboys?) in front of the tram depot with tram cars 17, 10 and 2 behind. All wearing uniform hats, but not all wearing full uniform (no badges but wearing ties - possibly temporary or casual staff - c1906 - 51 people. Trams have destination boards fitted to the tram above the roof. See Reg Item 709 for a wider view. Yields information about the early staff of the Electric Supply Co. of Victoria following the electrification of the tramways and their appearance.Block mounted photograph with gold edges onto a heavy card back and foam with four holes with a support screw.esco, group photo, tramways, ballarat, employees, crews

The 1st Australian Armoured Car Squadron was raised at Puckapunyal, Victoria in January 1946 from 4th Armoured Brigade volunteers. Following two months training it deployed to Japan as part of the occupation force joining the Australian 34th Brigade. The squadron was equipped with Canadian Scout Cars and Staghound Armoured Cars. The latter were found to be unsuitable for patrol duties on Japanese roads and replaced with additional scout cars. The 1st Armoured Car Squadron returned to Australia in December 1948 and became the basis for the 1st Armoured Regiment. This object is well provenance and, in its condition and completeness, is a fine example of unusual headgear worn by Australian armoured corps soldiers in the immediate post-World War 2 (39-45) period.Khaki heavy cloth beret with 'Rising Sun' badge and colour patch of the 1st Australian Armoured Car Squadron.beret, 1st australian armoured car squadron, japan

Banner used during 1984 tour of Canada and America by the Guiding Light Square Dance club. Made by Margaret Fox, who along with her husband Colin, volunteered to teach square dancing at the AFB. Her son remembers that his parents rarely ever drove to a dance together, as they would need both cars to ship down the food made by Margaret to the hall, or ferry dancers to and from dances.Yellow satin banner with green outline of Australia and two people dancing inside and writing inside boomerang across Australia and enamel badges attachedGuiding Light Square Dance Club 1984 Tour - Canada & Americarecreation, association for the blind, margaret fox, guiding light square dance club

The photograph of the Royal District Nursing Service (RDNS) Holden Torana vehicles was taken in the RDNS Headquarters car park at the rear of 452 St Kilda Road. These cars are part of the RDNS fleet, with others housed at RDNS Centres. The cars were used by the RDNS District nurses to visit patients in their own homes. This photograph depicts two door Holden Torana cars of 1972.Royal District Nursing Service (RDNS) has had various modes of transport over the last 130 plus years. At first, from 1885 as Melbourne District Nursing Society (MDNS), their Trained nurses (Nurses) walked the streets and lane ways amid the slums of central Melbourne. As the Society expanded public transport was used, and bicycles were bought by the Society in 1903 and used in inner areas until 1945. During the Spanish flu epidemic, in 1919, MDNS appealed for assistance to procure Motor vehicles so the Nurses could visit an influx of cases. Through trusts, grants and donations four 'Ford T Model' cars were procured which enabled the Nurses to triple their visits. Through constant use the cars were in such a poor state two were sold in 1922 and the others later. In 1922-23 three Peugeot cars were purchased and a woman Chauffeur, 'Miss Sword', was employed who lived in the Home and was also in charge of the garage. MDNS was expanding and a Motor Auxiliary was formed in 1929 to take the Trained nurses (Sisters) to patients, and some Sisters used their own cars; even a motorcycle was used by one Sister in 1933. All these forms of transport were intermingled and in the early 1950s, and now as Melbourne District Nursing Service, seven Ford Prefect cars were bought followed by twelve Ford Anglia cars 1955. Having received Royal patronage; the now Royal District Nursing Service (RDNS) had its own fleet of Holden vehicles by the mid 1960s and the Motor Auxiliary ceased operating in 1971 as by then all staff employed were required to have a driving licence. Seat-belts had been introduced to Victoria in 1959 and District fitted them to their cars from 1962, even though they did not become compulsory until 1970. The Holden vehicles were replaced with grey Holden Torana vehicles. After several years the fleet was changed to white Toyota Corolla vehicles. The Melways Directory of maps was introduced in 1966, which was a boon to the Sisters, though it was a few years before it went beyond Seville, so a large paper map was used by the Sisters visiting patients in the areas passed Seville. By 2009 there were 598 cars in the fleet and the Sisters travelled 9 million 200,000 kilometres – this is equivalent to 12 trips to the moon and back. Black and white photograph of 14, some partly hidden, new grey Holden Torana two door vehicles parked in two rows in the RDNS concrete based car park. The cars are parked with their front lights, grill, bumper bars and number plates facing the left of the photograph. The cars are seen side-on with the full side-on view of the two cars at the beginning of the rows seen in the foreground of the photograph. The flat bonnet is the same width as the rest of the body of the car; the windscreen slopes upward and joins the flat roof; there are two wiper blades resting at the base of the windscreen. In line, and at the level of the windscreen, a quarter window, and two windows divided by a narrow pillar can be seen running along the side of the car above the slightly convex body work and front door. The rear window slopes back from the roof and the slope continues on the upper bodywork of the boot lid. A metal strip runs along the side of the car about half way down the bodywork, and another runs just up from the beginning of the front wheel arch to the rear wheel arch; beside the front wheel arch is the word 'Torana'. The round, with capital letters 'RDNS', insignia can be seen on the upper centre of the front door of the two cars. The solid wheel caps have the Holden logo on them. The front grill which runs between the headlights on either side of the car, slopes slightly backwards from the central Holden badge. The bumper bar below this is metal. Black number plates with white written capital letters and numbers 'LFA - 208' and 'LFA - 207' are seen on two of the cars in the front row. The tops of two front seats with headrests and the top of a long back seat can be seen inside the car. A tall brick fence is seen running along the rear and right hand side of the car park. In the left background is a two storey building with a flat roof, and behind this on its left is a part of a tall building and to its right part of a bare tree can be seen. To the buildings right rear part of a house can be seen. In front and to the right of this is a three storey brick building, with the top two storeys seen above the car park fence. Multiple windows run along both levels of this building which has a tiled hip roof. The tops of some bushes are seen behind parts of the car park fence.Barry Sutton Photographer's Stamp Quote KX83rdns, royal district nursing service, rdns transport, rdns headquarters, rdns car park

This photograph is of RDNS staff taken outside the RDNS Essendon Centre on the day of its opening on the 30th of August 1967. The RDNS Sisters are wearing their uniforms of a red cardigans over their grey cotton frocks. The opening of the RDNS Essendon Centre enabled Sisters to leave from this building to give nursing care in the community. They returned to this building at the completion of their shift.Gradually over the years, Melbourne District Nursing Service (MDNS, later known as Royal District Nursing Service (RDNS) from 1966 when they received Royal patronage, opened Centres throughout the Melbourne Metropolitan area. Their Trained nurses left from these Centres each morning to carry out their nursing visits in a specific areas (districts) taking any sterilized equipment needed with them. They returned at the end of the day to write up their patients nursing histories, clean and reset any equipment used ready for sterilization, and contact other medical personal as necessary. Most of the RDNS cars were housed at each Centre, only a few being driven home by a Sister.Black and white photograph of sixteen Royal District Nursing Service, (RDNS) staff standing in two rows outside the Essendon Centre. The Sisters are wearing uniform dark cardigans over their grey uniforms; an RDNS badge can be seen attached on the upper left hand side front of some of the cardigans. They are wearing their grey peaked uniform hats, which have a round metal silver badge with the capital letter 'RDNS' written in blue across the centre section, attached to the centre front. They are standing in front of a building, which has a flat roof with a dark fascia and below this a large windows down to a short area of brickwork. Part of a light coloured building can be seen in the background on the left hand side of the photograph.Photographers stamp. Quote No. GJ 55rdns, royal district nursing service, rdns centre, rdns uniform

Mr. John Rossiter is the Minister of Health of Victoria. The RDNS Sisters are wearing their uniforms of grey dresses, red cardigans and grey peaked hats. The RDNS badge on their hats are made of metal with a royal blue circle containing the letters "Royal District Nursing Service". The inner section is divided in three parts; the upper and lower sections are silver and the centre section has the capital letters RDNS written in royal blue across it.Black and white photograph showing seven Royal District Nursing (RDNS) Sisters, four only partially seen, walking along a footpath with Mr. John Rossiter. Mr. Rossiter, who is in the centre of the photograph and group, has balding dark hair and is wearing a white shirt, striped tie, and a dark striped suit with a white flower in the button hole on his left lapel; a corner of a white handkerchief is seen in the left pocket of his jacket. The full view of three RDNS Sisters can be seen wearing their uniforms of a grey frock and dark cardigan and grey peaked hats with a round badge in the centre. In the background are some cars on the road, lamp posts and some trees. A white fence and a brick house with a tiled pitched roof is seen in the right hand side background.Photographers stamp. Quote No. KG 48royal district nursing service, rdns, rdns uniform, mr john rossiter

Part of Victorian Railways crockery. 'When the Victorian railways took over management of the Chalet from 1 october 1924, they ran their dining room and cafe in similar fashion to the dining cars on their trains and refreshment rooms on their stations, using the same ceramic hotel-ware and electro plated nickel silverware (EPNS), all made to order items that are clearly idenitified by the distinctive 'VR' monogram. . ..The Chalet Collecton also incudes items of ceramic stoneware... and these too interpret the function and role of the dining room. The ceramic items items were generally manufactured by 'Grindley' or 'Grafton'... Ceramic ware used at the Chalet from the 1920's to the 1950's had a black VR monogram or badge and was the same crockery used in th VR dining and buffet cars. Crockery used in the VR refreshment rooms had a red monogram." (Pg 104. Historica)' Listed in Draft Inventory of Significant Collection items. Appendix A.3.Tableware. (Pg 166 Historica).Small coffee cup with Victorian Railways in scroll design with a crown motif above scroll. White china with black transfer design. Mark and inscription on base. Handle is broken, cup cracked. Cup possibly broken during removal to Bright in 2005. also two teacups of the same design and inscription. Both have handles but both are cracked.-On base,"DURALINE / SUPER /VITRIFIED / GRINDLEY / HOTEL WARE Co / ENGLAND / 3-41 " On front of cup,"VICTORIAN RAILWAYS"

This Unibic Limited Edition ANZAC Biscuit tin is one of a series produced in 2014 to commemorate 100 years 1914 - 2014 of World War 1, focusing on the Victoria Cross, The Anzac Biscuit Story and The RSL Story. The included paper sheet explains the Victoria Cross in full detail. The RSL and Modern Baking Pty Ltd in Broadmeadows provided this product.A medium sized rectangular Limited Edition green and gold lidded Anzac Biscuit Tin with an old brown and grey toned photograph image of soldiers of the 5th Division in a motor car. The lettering for the tin is stamped in red and white at the top of the lid with Limited Edition in gold. At the bottom of the tin is written - Australian 5th Division 500g including a gold coloured embossed Rising Sun Badge. There is a brief explanation about the 5th Divisional Motor Car's location on one side of the tin as well as an explanation of the meaning of the Rising Sun Badge on the other side. The back of the tin has information about The Anzac Biscuit Story and a recipe. Inside the tin there is a folded brochure about the seven 2019 Limited Edition Tins that were available at the time.As stated above there is the name of the tin 'Limited Edition ANZAC Biscuit' with details of the tin's meaning for the Australian 5th Division. '500g Net' All of the tin has information about the soldiers who served in WW1 and WW2 and the relevance of the Anzac Spirit and biscuits.war, world war 1, world war 2, containers, tins, commemorative tins, rsl

BY THE time the FJ Holden was replaced with the FE in July 1956, Australia’s own had taken many steps forward. The six-volt electrics were replaced with a 12-volt set-up, the two-piece windscreen was replaced with a single curved item and the skinny 15in rims were replaced with 13x4.5 steelies. Unlike the FX-FJ, the FE was designed locally by an Australian team. The resulting car was much sleeker than the earlier models, being two inches longer in the wheelbase, four inches longer overall and slightly heavier than its predecessor. To compensate, the 132ci grey motor was blessed with another small dose of horsepower thanks to larger valves and improved cylinder heads. Other mechanical improvements included pendulum-style brake and clutch pedals, hydraulic clutch actuation, larger brake drums and recirculating ball (rather than worm and sector) steering. Other great leaps forward included optional heater, indicators, reversing lights, windscreen washers and demister. In knocked down form was the first model to be exported to New ZealandBlack painted special sedan. Added accessories include exterior sun visor, headlight protectors, and on the interior grab handle mounted across the back of the front seatDiecast special sedan badge on rear quarters. Number plate club permit 63450 Hfe special, holden, sedan, car

It was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). Although the Controlled Coupling Hydramatic used in the EH was actually a four speed, it effectively worked as a three speed unit except at full throttle. The 179 ci (2900cc) engine was initially only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box was called the "EH-S4", fitted with an up-graded manual gear box, with stronger gears than the 149ci gear box and an up-graded clutch. The three-speed manual (column shift) gear boxes had no synchromesh on first only second and third 'top gear'It was the first Holden to incorporate the new "Red" engine, with a 7 main bearing crankshaft instead of the 4 main bearing crankshaft used in the "Grey" engine. The larger capacity 149 ci (2400cc) engine was first only sold attached to a three-speed manual gear box or the "Hydramatic" three-speed automatic transmission with a (column shift). Although the Controlled Coupling Hydramatic used in the EH was actually a four speed, it effectively worked as a three speed unit except at full throttle. The 179 ci (2900cc) engine was initially only sold with the "Hydramatic" three-speed. The first EH with a 179 ci engine and a manual gear box was called the "EH-S4", fitted with an up-graded manual gear box, with stronger gears than the 149ci gear box and an up-graded clutch. The three-speed manual (column shift) gear boxes had no synchromesh on first only second and third 'top gear'Two tone, blue body and white roofon the boot of this car there is a 179 badge stating that this car was powered by the larger motor available. There was also a "Hydra-matic" badge showing this vehicle was fitted with an automatic transmission. Registered number 63454-Hholden, 1963 - 1965, car

The HD Holden was introduced by GMH in 1965 and for a variety of reasons was considered the ugly duckling. The HD replaced the large selling and very popular EH (1964) model. the dramatic change in design from the square slopped EH to the sharp edged shape of the HD was met with some buyer resistance and was highly criticised by the motor writing fraternity. The unusual front guard shape, which became known as kidney cutters, which assisted with the unpopular impression, resulted in lower sales. The vehicle had both the 149 and 179 cubic inch capacity red engines with either the hydromatic or 3 speed manual was a good vehicle. The HD model also introduced the X2/ which was the first attempt by GMH to produce a performance vehicle. Our HD also has the leather seats in the premier version and this was the last model to have dealership leather seats. This vehicle has 13.000 miles on the clock and is probably the most absolutely original and lowest mileage HD model in Australia, the vehicle in every aspect is "as new" and in fantastic condition of this model Holden which has significant motoring history.1965 Holden Premier sedan with 179 motorPremier on rear as well as a 179 badge. HOLDEN across bonnet Registered number 63456-Hvehicle, holden, 1965, car