Showing 132 items
matching leather legging
-
Beechworth RSL Sub-Branch
Legging
... Brown leather cylindrical shaped legging with two leather... cylindrical shaped legging with two leather straps for fastening. One ...This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles at the top. Both buckles are made of brass. The straps then tuck under four final leather loops, two of which are bolted to the legging with three corroded nails. Top of legging also carries a small brass hook.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war -
Beechworth RSL Sub-Branch
Legging
... Brown leather cylindrical shaped legging with two leather... cylindrical shaped legging with two leather straps for fastening. One ...This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles. The upper buckle is made of brass and the lower is made of steel. The straps then tuck under three final leather loops, two of which are bolted to the legging with three corroded nails. There should be a third loop here that is missing. Top corner of legging also carries a small corroded metal hook, presumably to hold layers together firmly.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, 1890s
These oak and rattan arm chairs were previously used in the old Warrnambool Museum and Art Gallery, opened on 29th July 1886 with Mr Joseph Archibald as Curator, demolished in 1960. Chairs are significant to local history as they were originally purchased for use in the Warrnambool Museum and Art Gallery. The chairs were part of the social and cultural history of WarrnamboolChair, oak wood arm chair (set of 9), cureved back with decorated wooden edges, shield carved into top and protective metal plates on top at rear. Padded leather seat studded at edge, over rattan cane seat. Rattan cane is stitched onto wooden frame through drilled holes. Front and side legs each have two spindles between them. back legs have one. Legs are turned and slightly cambriol. Some chairs have written on back leg "1486". Made in England, c. 1896Some of the chairs have hand written black pen on back leg "1486"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, arm chair, rattan chair, warrnambool museum, warrnambool art gallery, 1890s chair, 19th century furniture, domestic furniture -
Flagstaff Hill Maritime Museum and Village
Chair, 1907-1914
The design of this set of four lightweight chairs is based on Thonet’s bentwood designs, which are still some of the best-selling designs for café and restaurant owners. It is elegant, sophisticated and durable. Some of these chairs still have their original seat, under which the letters “TH” or “RSL” are hand written. Flagstaff Hill has several bentwood chairs with these letters on them, in either chalk, black paint, or both. It is believed that the chairs were used in the original Warrnambool Town Hall, and later the RSL. The Town Hall was completed in 1891, built on the corners of Timor and Liebig Streets. (In 1977 the Town Hall was declared unsafe and was later replaced by the Warrnambool Performing Arts Centre.) Some of the chairs have marks, paper labels and symbols on them that show that the maker was Josef Jaworek, who had a small furniture factory in east Sinensia, which was at that time in Austria, from 1907 - 1914. Bentwood chairs are made by a process of wetting wood in water, bending it into curved shapes, then allowing it to dry so that the shape becomes permanent. This process originated by Michael Thonet, who had been given the right to bend wood into desired curves by the Austrian Courts in 1842. In 1856 he was granted a 13 year patent to manufacture chairs and table legs of bent wood treated by steam or boiling water. In 1859 his company Gebruder Thonet produced his original design. Thonet’s early designs also featured hand carved or laminated wooden seats. His Model No. 14 was produced in the 1850’s and his most popular design. After Michael’s death in 1871 the family went on designing and producing chairs. These bentwood chairs are believed to be associated with the original Warrnambool Town Hall. The Warrnambool Town Hall played a significant role in the both the local government and the social events of local and district areas. It was a place for Council meetings, community events and entertainment, theatrical and musical.Bentwood chair (4 of 4), painted black, inner back is curled loop, seat has leather cover attached with studs, ventilation holes under seat, legs are splayed and have a bracing ring. Marks: under seat, handwritten and stamped into wood.Marked with handwritten "TH", in both black paint & white chalk. Under rim is label printed "65" Stamped into wood on rim under chair "95".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bentwood chair, café chair, restaurant chair, josef jaworek, austrian chairs, furniture -
Flagstaff Hill Maritime Museum and Village
Domestic object - Chair, Early 20th Century
The chair has been used since antiquity, although for many centuries it was a symbolic article of state and dignity rather than an article for ordinary use. "The chair" is still used as the emblem of authority in the House of Commons in the United Kingdom and Canada, and in many other settings. In keeping with this historical connotation of the "chair" as the symbol of authority, committees, boards of directors, and academic departments all have a 'chairman' or 'chair'. Endowed professorships are referred to as chairs. It was not until the 16th century that chairs became common. Until then, people sat on chests, benches, and stools, which were the ordinary seats of everyday life. The number of chairs which have survived from an earlier date is exceedingly limited; most examples are of ecclesiastical, seigneurial or feudal origin. Chairs were in existence since at least the Early Dynastic Period of Egypt (c. 3100 BC). They were covered with cloth or leather, were made of carved wood, and were much lower than today's chairs – chair seats were sometimes only 10 inches (25 cm) high. In ancient Egypt, chairs appear to have been of great richness and splendour. Fashioned of ebony and ivory, or of carved and gilded wood, they were covered with costly materials, magnificent patterns and supported upon representations of the legs of beasts or the figures of captives. Generally speaking, the higher ranked an individual was, the taller and more sumptuous was the chair he sat on and the greater the honour. On state occasions, the pharaoh sat on a throne, often with a little footstool in front of it.[ The average Egyptian family seldom had chairs, and if they did, it was usually only the master of the household who sat on a chair. Among the better off, the chairs might be painted to look like the ornate inlaid and carved chairs of the rich, but the craftsmanship was usually poor. The earliest images of chairs in China are from 6th-century Buddhist murals and stele, but the practice of sitting in chairs at that time was rare. It was not until the 12th century that chairs became widespread in China. Scholars disagree on the reasons for the adoption of the chair. The most common theories are that the chair was an outgrowth of indigenous Chinese furniture, that it evolved from a camp stool imported from Central Asia, that it was introduced to China by Christian missionaries in the 7th century, and that the chair came to China from India as a form of Buddhist monastic furniture. In modern China, unlike Korea or Japan, it is no longer common to sit at floor level. In Europe, it was owing in great measure to the Renaissance that the chair ceased to be a privilege of state and became a standard item of furniture for anyone who could afford to buy it. Once the idea of privilege faded the chair speedily came into general use. Almost at once the chair began to change every few years to reflect the fashions of the day. Thomas Edward Bowdich visited the main Palace of the Ashanti Empire in 1819, and observed chairs engrossed with gold in the empire. In the 1880s, chairs became more common in American households and usually there was a chair provided for every family member to sit down to dinner. By the 1830s, factory-manufactured “fancy chairs” like those by Sears, Roebuck, and Co. allowed families to purchase machined sets. With the Industrial Revolution, chairs became much more available. The 20th century saw an increasing use of technology in chair construction with such things as all-metal folding chairs, metal-legged chairs, the Slumber Chair,[ moulded plastic chairs and ergonomic chairs. The recliner became a popular form, at least in part due to radio and television. The modern movement of the 1960s produced new forms of chairs: the butterfly chair (originally called the Hardoy chair), bean bags, and the egg-shaped pod chair that turns. It also introduced the first mass-produced plastic chairs such as the Bofinger chair in 1966. Technological advances led to moulded plywood and wood laminate chairs, as well as chairs made of leather or polymers. Mechanical technology incorporated into the chair enabled adjustable chairs, especially for office use. Motors embedded in the chair resulted in massage chairs. https://en.wikipedia.org/wiki/ChairThe chair is one of the most commonly used items providing comfort.Chair wooden varnished dark brown. Spokes for back support, front legs and spokes joining legs are patterned turned wood. Back rest has a floral emblem with a kangaroo in the centre.Back rest has a floral emblem with a kangaroo in the centre.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, dining, carpentry -
Flagstaff Hill Maritime Museum and Village
Domestic object - Chair, Early 20th Century
The chair has been used since antiquity, although for many centuries it was a symbolic article of state and dignity rather than an article for ordinary use. "The chair" is still used as the emblem of authority in the House of Commons in the United Kingdom and Canada, and in many other settings. In keeping with this historical connotation of the "chair" as the symbol of authority, committees, boards of directors, and academic departments all have a 'chairman' or 'chair'. Endowed professorships are referred to as chairs. It was not until the 16th century that chairs became common. Until then, people sat on chests, benches, and stools, which were the ordinary seats of everyday life. The number of chairs which have survived from an earlier date is exceedingly limited; most examples are of ecclesiastical, seigneurial or feudal origin. Chairs were in existence since at least the Early Dynastic Period of Egypt (c. 3100 BC). They were covered with cloth or leather, were made of carved wood, and were much lower than today's chairs – chair seats were sometimes only 10 inches (25 cm) high. In ancient Egypt, chairs appear to have been of great richness and splendour. Fashioned of ebony and ivory, or of carved and gilded wood, they were covered with costly materials, magnificent patterns and supported upon representations of the legs of beasts or the figures of captives. Generally speaking, the higher ranked an individual was, the taller and more sumptuous was the chair he sat on and the greater the honour. On state occasions, the pharaoh sat on a throne, often with a little footstool in front of it.[ The average Egyptian family seldom had chairs, and if they did, it was usually only the master of the household who sat on a chair. Among the better off, the chairs might be painted to look like the ornate inlaid and carved chairs of the rich, but the craftsmanship was usually poor. The earliest images of chairs in China are from 6th-century Buddhist murals and stele, but the practice of sitting in chairs at that time was rare. It was not until the 12th century that chairs became widespread in China. Scholars disagree on the reasons for the adoption of the chair. The most common theories are that the chair was an outgrowth of indigenous Chinese furniture, that it evolved from a camp stool imported from Central Asia, that it was introduced to China by Christian missionaries in the 7th century, and that the chair came to China from India as a form of Buddhist monastic furniture. In modern China, unlike Korea or Japan, it is no longer common to sit at floor level. In Europe, it was owing in great measure to the Renaissance that the chair ceased to be a privilege of state and became a standard item of furniture for anyone who could afford to buy it. Once the idea of privilege faded the chair speedily came into general use. Almost at once the chair began to change every few years to reflect the fashions of the day. Thomas Edward Bowdich visited the main Palace of the Ashanti Empire in 1819, and observed chairs engrossed with gold in the empire. In the 1880s, chairs became more common in American households and usually there was a chair provided for every family member to sit down to dinner. By the 1830s, factory-manufactured “fancy chairs” like those by Sears, Roebuck, and Co. allowed families to purchase machined sets. With the Industrial Revolution, chairs became much more available. The 20th century saw an increasing use of technology in chair construction with such things as all-metal folding chairs, metal-legged chairs, the Slumber Chair,[ moulded plastic chairs and ergonomic chairs. The recliner became a popular form, at least in part due to radio and television. The modern movement of the 1960s produced new forms of chairs: the butterfly chair (originally called the Hardoy chair), bean bags, and the egg-shaped pod chair that turns. It also introduced the first mass-produced plastic chairs such as the Bofinger chair in 1966. Technological advances led to moulded plywood and wood laminate chairs, as well as chairs made of leather or polymers. Mechanical technology incorporated into the chair enabled adjustable chairs, especially for office use. Motors embedded in the chair resulted in massage chairs. https://en.wikipedia.org/wiki/ChairThe chair is one of the most commonly used items providing comfort.Chair wooden varnished dark brown. Spokes for back support, front legs and spokes joining legs are patterned turned' wood. Backrest has a floral emblem with a kangaroo in the centre.Back rest has a floral emblem with a kangaroo in the centre.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, dining, carpentry -
Flagstaff Hill Maritime Museum and Village
Domestic object - Chair, Early 20th Century
The chair has been used since antiquity, although for many centuries it was a symbolic article of state and dignity rather than an article for ordinary use. "The chair" is still used as the emblem of authority in the House of Commons in the United Kingdom and Canada, and in many other settings. In keeping with this historical connotation of the "chair" as the symbol of authority, committees, boards of directors, and academic departments all have a 'chairman' or 'chair'. Endowed professorships are referred to as chairs. It was not until the 16th century that chairs became common. Until then, people sat on chests, benches, and stools, which were the ordinary seats of everyday life. The number of chairs which have survived from an earlier date is exceedingly limited; most examples are of ecclesiastical, seigneurial or feudal origin. Chairs were in existence since at least the Early Dynastic Period of Egypt (c. 3100 BC). They were covered with cloth or leather, were made of carved wood, and were much lower than today's chairs – chair seats were sometimes only 10 inches (25 cm) high. In ancient Egypt, chairs appear to have been of great richness and splendour. Fashioned of ebony and ivory, or of carved and gilded wood, they were covered with costly materials, magnificent patterns and supported upon representations of the legs of beasts or the figures of captives. Generally speaking, the higher ranked an individual was, the taller and more sumptuous was the chair he sat on and the greater the honour. On state occasions, the pharaoh sat on a throne, often with a little footstool in front of it.[ The average Egyptian family seldom had chairs, and if they did, it was usually only the master of the household who sat on a chair. Among the better off, the chairs might be painted to look like the ornate inlaid and carved chairs of the rich, but the craftsmanship was usually poor. The earliest images of chairs in China are from 6th-century Buddhist murals and stele, but the practice of sitting in chairs at that time was rare. It was not until the 12th century that chairs became widespread in China. Scholars disagree on the reasons for the adoption of the chair. The most common theories are that the chair was an outgrowth of indigenous Chinese furniture, that it evolved from a camp stool imported from Central Asia, that it was introduced to China by Christian missionaries in the 7th century, and that the chair came to China from India as a form of Buddhist monastic furniture. In modern China, unlike Korea or Japan, it is no longer common to sit at floor level. In Europe, it was owing in great measure to the Renaissance that the chair ceased to be a privilege of state and became a standard item of furniture for anyone who could afford to buy it. Once the idea of privilege faded the chair speedily came into general use. Almost at once the chair began to change every few years to reflect the fashions of the day. Thomas Edward Bowdich visited the main Palace of the Ashanti Empire in 1819, and observed chairs engrossed with gold in the empire. In the 1880s, chairs became more common in American households and usually there was a chair provided for every family member to sit down to dinner. By the 1830s, factory-manufactured “fancy chairs” like those by Sears, Roebuck, and Co. allowed families to purchase machined sets. With the Industrial Revolution, chairs became much more available. The 20th century saw an increasing use of technology in chair construction with such things as all-metal folding chairs, metal-legged chairs, the Slumber Chair,[ moulded plastic chairs and ergonomic chairs. The recliner became a popular form, at least in part due to radio and television. The modern movement of the 1960s produced new forms of chairs: the butterfly chair (originally called the Hardoy chair), bean bags, and the egg-shaped pod chair that turns. It also introduced the first mass-produced plastic chairs such as the Bofinger chair in 1966. Technological advances led to moulded plywood and wood laminate chairs, as well as chairs made of leather or polymers. Mechanical technology incorporated into the chair enabled adjustable chairs, especially for office use. Motors embedded in the chair resulted in massage chairs. https://en.wikipedia.org/wiki/ChairThe chair is one of the most commonly used items providing comfort.Chair varnished dark brown. Spokes for back support, front legs and spokes joining legs are patterned turned wood. Back rest has a floral emblem with a kangaroo in the centre.Back rest has a floral emblem with a kangaroo in the centre.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chair, dining, carpentry -
Flagstaff Hill Maritime Museum and Village
Instrument - Telescope, Early 18th Century
... that has folding legs. Brass telescope with leather sheath over... is mounted on wooden tripod stand that has folding legs. Brass ...This Dollond Day or Nigh telescope was designed to be used in any light conditions, as its name implies. Telescopes are optical instruments designed to make objects appear to be larger or closer. The discovery of the first telescope in 1608 can be attributed to Hans Lippershey of the Netherlands when he discovers that holding two lenses up some distance apart bring objects closer. He applies for a patent on his invention and this becomes the first documented creation of a telescope. Then in 1668, Newton produces the first successful reflecting telescope using a two-inch diameter concave spherical mirror. This opened the door to magnifying objects millions of times far beyond what could ever be obtained with a lens. It wasn’t until 1729 that Chester Moor Hall develops an achromatic lens (two pieces of glass with different indices of light refraction combined produce a lens that can focus colours to almost an exact point resulting in much sharper images but still with some distortion around the edges of the image. Then in 1729 Scottish instrument maker James Short invents the first parabolic and elliptic, distortion-less mirror ideal for reflecting telescopes. We now come to John Dollond who improves upon the achromatic objective lens by placing a concave flint glass lens between two convex crown glass lenses. This had the effect of improving the image considerably. Makers Information: John Dollond (1707-1761) London England he was a maker of optical and astronomical instruments who developed an achromatic (non-colour distorting) refracting telescope and practical heliometer. A telescope that used a divided lens to measure the Sun’s diameter and the angles between celestial bodies. The son of a Huguenot refugees Dollond learned the family trade of silk weaving. He became proficient in optics and astronomy and in 1752 his eldest son, Peter joined his father in an optical business, in 1753 he introduced the heliometer. In the same year, he also took out a patent on his new lenses. He was elected a fellow of the Royal Society in May 1761 but died suddenly in November and his share in the patent passed to his son Peter. In subsequent squabbles between Peter and the many London opticians who challenged his patent, Peter’s consistent position was that, whatever precedents there may have been to his achromatic lenses, his father had independently reached his practical technique on the basis of his theoretical command of Newtonian optics. As a result of maintaining his fathers patent, Dollond s became the leading manufacturer of optical instruments. For a time in the eighteenth and nineteenth century the word 'Dollond' was almost a generic term for telescope rather like 'Hoover; is to vacuum cleaner. Genuine Dollond telescopes were considered to be amongst the best. Peter Dollond (1731-1820) was the business brain behind the company which he founded in Vine Street, Spitalfields in 1750 and in 1752 moved the business to the Strand London. The Dollonds seem to have made both types of telescopes (reflecting and refracting), possessing the technology to produce significant numbers of lenses free of chromatic aberration for refracting telescopes. A Dollond telescope sailed with Captain Cook in 1769 on his voyage to observe the Transit of Venus. Thomas Jefferson and Admiral Lord Nelson were also customers of the Dollonds. Dollond & Co merged with Aitchison & Co in 1927 to form Dollond & Aitchison, the well-known high street chain of opticians, now fully part of Boots Opticians. They no longer manufacture but are exclusively a retail operation. John Dollond's experiments in optics and how different combinations of lenses refract light and colour gave a better understanding of the divergent properties of lenses. That went on to inform and pave the way for the improvement of our understanding of optics that is represented today. Dollond was referred to in his time as the "Father of practical optics" as a leader in his field he received many prestigious awards. The telescope in the collection is a good example of one of Dollond's early library telescopes. Its connection with one of England's 18th century pioneers in optical development makes it a significant and an important item to have within the collection.Telescope: Dollond's Telescope, Day or Night model navigational instrument. Telescope is mounted on wooden tripod stand that has folding legs. Brass telescope with leather sheath over barrel, adjustable angle fitting with brass wing nuts that join the legs to the top frame, which is then joined to the telescope pole by an adjustable screw fitting. Manufactured by Dollond, London. Inscription reads "Dollond London, Day or Night" and "DOLLOND LONDON"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, telescope, dollond, dollond london, day & night telescope, floor-standing telescope, optical instrument, john dollond, peter dollond, achromatic telescope, heliometer, light refraction, instrument maker, lens, transit of venus, astronomical telescope, concave lens, library telescope, dollond telescope, day or night, day or night telexcope, scientific instrument, navigation, navigational instrument, astronomy -
Rye RSL Sub Branch
Puttees
Woolen putees worn as lower leg protection. These were wrapped around the lower leg from the top of the ankle boot upwards and tucked into the top to offer some sort of protection from the elements, wire entanglements and to prevent loose clothing from becoming a hazard. Officers had high topped bootd and Mounted personal had leather leggings. These were for the rankl and file infantry and other members of the forces. -
Rye RSL Sub Branch
Leather Leggings
Robust leather leggings, wrapped around the ankle and calf from the boot top and fixed in place with the leather strapping coiled around the outside. These offered substantial protection to the lower legs of mouted troops such as, Light Horse, Mounted Artillery, and Mounted Field Ambulance. Tey are as readily identifiable with Light Horse as are the Emu Plumes, (Kangaroo feather) worn in the Pugaree. -
Flagstaff Hill Maritime Museum and Village
Chair, 1907-1914
The design of this set of four lightweight chairs is based on Thonet’s bentwood designs, which are still some of the best-selling designs for café and restaurant owners. It is elegant, sophisticated and durable. Some of these chairs still have their original seat, under which the letters “TH” or “RSL” are hand written. Flagstaff Hill has several bentwood chairs with these letters on them, in either chalk, black paint, or both. It is believed that the chairs were used in the original Warrnambool Town Hall, and later the RSL. The Town Hall was completed in 1891, built on the corners of Timor and Liebig Streets. (In 1977 the Town Hall was declared unsafe and was later replaced by the Warrnambool Performing Arts Centre.) Some of the chairs have marks, paper labels and symbols on them that show that the maker was Josef Jaworek, who had a small furniture factory in east Sinensia, which was at that time in Austria, from 1907 - 1914. Bentwood chairs are made by a process of wetting wood in water, bending it into curved shapes, then allowing it to dry so that the shape becomes permanent. This process originated by Michael Thonet, who had been given the right to bend wood into desired curves by the Austrian Courts in 1842. In 1856 he was granted a 13 year patent to manufacture chairs and table legs of bent wood treated by steam or boiling water. In 1859 his company Gebruder Thonet produced his original design. Thonet’s early designs also featured hand carved or laminated wooden seats. His Model No. 14 was produced in the 1850’s and his most popular design. After Michael’s death in 1871 the family went on designing and producing chairs. These bentwood chairs are believed to be associated with the original Warrnambool Town Hall. The Warrnambool Town Hall played a significant role in the both the local government and the social events of local and district areas. It was a place for Council meetings, community events and entertainment, theatrical and musical.Bentwood chair (1 of 4), painted black, inner back is curled loop. Seat is padded leather, attached by studs. Splayed legs. Patterned ventilation holes under seat. Under seat are various Marks; hand painted, printed on small piece of paper, stamped in wood.Under seat are various Marks; hand painted in black "TH", printed on small piece of paper "400", stamped in wood "400" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bentwood chair, café chair, restaurant chair, josef jaworek, austrian chairs -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, 1900-1914
Bentwood furniture is a type of furniture made by bending wooden rods into the required shape after they have been heated with steam. Mundus bentwood chairs are among the most successful examples of early mass-produced furniture. The inventor of manufacturing chairs using this method was Gebrüder Thonet. The subject item was made at Josef Jaworek small factory that produced bentwood chairs and was the only Polish member associated with the Mundus furniture company of Vienna. This company was founded in 1907 and Mundus went on to merge with J & J Kohn in August of 1914. Mundus furniture was a significant manufacturing company, active in several places in the Austro Hungarian Empire, at the end of the 19th century and early 20th century. Factories seem to have existed in multiple locations including Poland. Their products carry diverse labels, such as "Budapest", "Borlova", "Czechoslovakia", etc, some of the furniture was co-signed with "Jacob and Josef Kohn". Mundus also merged with Gebrüder Thonet in 1922 the inventor of the bentwood chair.The subject item is believed to be associated with the original Warrnambool Town Hall and would have been part of the buildings furnishings. The town Hall played a significant role in both local government and social events of local and district areas. It was not only a place for Council meetings but community events and social events. The item is significant as it is an early example of mass-produced manufactured furniture from a company in Austria that pioneered this type of furniture around the turn of the late 19th and early 20th centuries. This item is now regarded as a collector's piece giving it additional significance and interest.Bentwood chair (2 of 4), painted black, inner back is curled loop. Seat has leather cover, attached with studs. Ventilation holes under seat in star pattern. Splayed legs with bracing ring. Marks: pressed into some legs, under seat, paper label on rim under seat says the chair is made in Austrla.Marks: "3" is pressed into some legs, chalk letters under seat "RS", makers label, cream with dark print; on either side are 2 coins, top left coin has bust of a man, top right has an emblem with 1885 under it. Text of label "MOBEL-FABRIKEN / von / JOSEF JAWOREK / Teschen, osterr, Schlesien"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bentwood chair, café chair, restaurant chair, josef jaworek, austrian chairs, furniture, gebrüder thonet -
Flagstaff Hill Maritime Museum and Village
Furniture - Chair, early 29th century
The Bentwood chair has been called ‘the world’s most popular chair’. The original Bentwood chair, was designed by German-Austrian cabinet maker and Master Joiner, Michael Thonet (b.1796 - d.1871) and introduced to the market in 1859. Thonet started his business in his home town of Boppard as an independent cabinet maker in 1819. In the 1830’s he began trying to make furniture from glued (laminated) and bent wooden slats. Over the next few years his attempts to patent this process failed in Germany, Great Britain, France, and Russia. He then began using lightweight, strong wood and bending it into elegant, comfortable furniture. The Bentwood technology took Thonet years to perfect. In simple terms, the wooden rods or lengths were wet by soaking or steaming, bent into shape and then held in place until they hardened into the moulded curved shape or pattern. The wood usually chosen for the bentwood chairs was maple or beech. Thonet had revolutionised an older process by industrialising the process. The dowels of wood were cut and prepared as components of furniture, treated by the ‘bentwood’ process, then ready immediately for assembling with very little extra workmanship needed. Thonet held 2 patents for this process, the second one ended on 10th July 1869 and was non-renewable. At the Trade Fair at Koblenz of 1841 Prince Klemens Wenzel von Mettemich was very impressed with Thonet’s furniture, especially the chairs. In 1842 Thonet sold his Boppard business and emigrated to Vienna, and began working, along with his sons, on the interior decoration of the Palais Leichtenstein, for the Carl Leistler establishment. In 1849 he began his own business again, the Gebruder Thonet to include his sons (translated “Brothers Thonet”). He produced the “No. 1” Bentwood chair. He received a bronze medal for his Vienna bentwood chairs at the World Fair in London in 1851, and a silver medal in Paris in 1855. In 1856 he opened a new factory in Koritchan (Moravia), where there were extensive woods of beech trees available for his enterprise. In the next years, five more Eastern European production sites were established in Bystritz (1862), Nagy-Ugrócz (1866), Wsetin (1867), Hallenkau(1867) and Nowo-Radomsk(1880). Thonet’s 1859 No. 14 “chair of chairs” (or “Konsumstuhl Nr. 14” – coffee shop chair no. 14) was the most famous of all of Thonet’s Bentwood chairs. In 1867 he received a gold medal at the Paris World Fair. This new style of furniture making became very popular. Up until 1830 50 million of these chairs had been produced. By the 1870’s Thonet owned offices in almost 20 countries, with sales locations across Europe, in Chicago and New York. In 1889 he set Thonet set up a head office in Frankenberg, Hesse. Bentwood models designed in the mid to late 19th century featured hand-caned or laminated wood seats and were usually stamped with the country of origin. The Bentwood elements were the backrest, seat rim and legs. Typically the seat was covered with ‘bucket’ leather. After the Patent ran out in 1869, companies such as Jacob & Josef Kohn began the production of bentwood furniture.The popularity of the Bentwood chair that was introduced by Michael Thonet in the 1850s is due to its versatility and timeless quality. Its style, whether varnished or painted, suits any room in the house. The lightweight chairs are also popular for café and restaurant seating, as well as for public gatherings. They can be easily moved around and grouped in a variety of ways to suit any occasion.Chair, bentwood, pair of two. Backrest has full length inverted U inside frame. Support rail and wire reinforcing between legs. 3692.01 seat has floral pattern pressed into wood 3692.02 seat is plain (replacement seat). Made by Harnison & Co.3692.01 chair's marks; Label ""HARNISON & CO./ NEUSOL / BUDAPEST" and "WIENER NOBEL" and "(symbol) N inside circle, under Crown" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, domestic furniture, dining furniture, bentwood chair, harnison & co., neusol, budapest, wiener nobel -
Frankston RSL Sub Branch
Stand, Tripod, Puddefoot Bowers & Simonett Limited, ca 1940
A portable, three legged stand in the form of a tripod, used by Australian and British Commonwealth military forces for mounting the standard issue signaling lamp and heliograph. The three collapsible, metal tipped, wooden legs are joined by hinge fittings to a brass collar with a threaded mount at one end (the head). The mounting thread is approximately 38mm diameter and fitted with a protective cap which can be removed for use, the cap being retained by a length of light chain. The stand is complete with a leather and webbing carrying strap attached to the head fitting of the stand with a leather sleeve at the other end which fits over the free end of the legs when folded.The brass collar and mount is stamped: "STAND LAMP OR HELIO A MKlll" the manufacturer "P.M.G. VIC" and "1941"military, tripod, ww2, world war 2, signalling, heliograph, stand -
Bendigo Military Museum
Uniform - JACKET AND TROUSERS, BATTLE DRESS, ARMY, Australian Defence Industries, 1953
"W.J.BERTUCH" SERVICE DETAILS - REFER CAT NO. 1664.2.1. Jacket - khaki colour, wool fabric, Battle dress style, belted at waist with metal buckle and brown plastic buttons. Collar, shoulder epaulettes, two front pockets with button down flap and sleeve cuffs. Shoulder insignia, white on red lettering "ROYAL AUSTRALIAN REGIMENT". Light khaki cotton twill fabric pocket lining. Manufacturers white fabric cotton labels. - Left pocket lining. Handwritten information. 2. Trousers - khaki colour wool fabric, Battle dress style, with two side pockets, two back pockets with concealed button down flap, one side leg pocket with concealed button down flap, button down belt loops on waist band, five button fly. Brown plastic buttons. Light khaki colour cotton twill lining to waist band and pockets. Manufacturers white cotton label, back waistband lining. Handwritten information. 3. Braces - type known as "POLICE AND FIREMEN". Set of cotton, flat elastic braces with leather button attachments for trousers. Stripes on elastic are brown, beige, blue, black and grey in colour. Metal slides for adjustment to wearers size. 1. & 2. Manufacturers information on labels. 1. Tw labels - black ink print - "Regimental NO./ NAME". Red ink print "M.T.X./ SIZE 3". Third cotton label - black ink print - all print indecipherable. Handwritten information - blue ink pen "PTE W.J. BERTUCH" 2. Black ink print "J. WILSON PTY LTD/ 1953/ SIZE 118/ MADE IN AUSTRALIA/ REGIMENTAL NO. / NAME". BLACK INK STAMP "?? - RO-SET" Handwritten information, blue ink pen "BERTUCH/ 59060". 3. Stamped on metal adjustment slides 'POLICE AND FIREMEN". Black ink stamp on leather F.B.??/ ^/ 1966/38.uniform, army, battle dress, w.j. bertuch -
Bendigo Military Museum
Uniform - MESS DRESS, RACT, 1) and .2) DAVID KLEIN PTY LTD, 1) and .2) 1966
Royal Australian Corps of Transport mess dress belonging to Kevin John Herdman. Part of the Kevin John Herdman No. 397661 Collection, See Catalogue No. 5942P for details of his service record..1) Black jacket with two button-down breast pockets and two side pockets with flaps. Jacket buttons at the neck and down the front. Unit insignia on right collar. White starched false collar attached with studs. All buttons bear a unit insignia and are gold coloured. Major's rank insignia on each epaulette. Manufacturer's label on inside left. .2) Pair of black trousers with two white stripes down the outside of each leg. Buttons on waist band for attaching braces. .3) White elastic adjustable braces. .4) Black peaked cap with red band. Gold coloured braiding on peak. Brown coloured sweat band and clear plastic lining..1) On manufacture's label: 'DAVID KLEIN PTY LTD, PTY LTD, VICTORIA, 1966, (upwards arrow)'. On false collar: 'C.G.C.F., SIZE 15'. .2) On manufacturer's label: 'DAVID KLEIN PTY LTD, PTY LTD, VICTORIA, 1966, (upwards arrow)'. .3) Stamped on leather joiner: 'P-F, 10 73, (upwards arrow), 44'. .4) Inside cap: 'COMMONWEALTH GOVERNMENT CLOTHING FACTORIES, MELBOURNE,6 3/4'.uniform, mess dress, royal australian corps of transport, kevin john herdman -
Bendigo Military Museum
Souvenir - FLOOR CUSHION, WW2
Cushion brought home from the Middle East by W.E. HAYWARD. "William Edwin HAYWARD" VX30915 enlisted20.6.1940 age 27 years in 2/2nd Anti Aircraft Regt, embarked for the Middle East 5.2.1941, disembarked Australia 18.3.1942, embarked fro New Guinea 24.5.1942, disembarked Australia 7.2.1944, (received leave to Aust during that near 2 years) he was hospitalised with Dermatitis to face, arms & legs, Malaria, discharged from the AIF 3.10.1945. Enlisted 20 June 1940. Discharged 3 Oct 1945. Rank: Gunner 2/2nd ANTI AIRCRAFT REGT.Cushion - handcrafted, brown and red leather floor cushion or pouffe - a low footstool. Cushions made in segments and is round with flat top and bottom. Zipper missing from base. Handstitched on top. Cushion padding made from cotton lining and kapok stuffing.souvenir, foot cushion, middle east, ww2, william edwin hayward -
Bendigo Military Museum
Equipment - LEGGINGS, LEATHER, Unknown
Items in a collection relating to Edward Judd, refer Cat No 7410 for his service details.1. & 2. Pair of brown leather leggings with leather straps. The top section has two buckles and one strap. One legging is missing the long strap.horse riding equipment, leggings -
Bendigo Military Museum
Photograph - PORTRAITS OF WW1 SOLDIERS, 1914-1918
1. Portrait, full length of a soldier standing at ease. He is holding a single rifle with bayonet fixed. He has a peaked cap and the 3"webbing belt on. he is standing in a yard of some sort. Corrugated iron shed in back ground. 2. Portrait, full length of a soldier. Standing legs apart. He is holding a riding crop. he has a leather covered watch. He has one chevron on his left forearm above that are crossed flags. He is wearing a leather bandolier. He has a peaked cap. 3. Group portrait of Australian soldiers on a ship. 13 men - bare headed and slouch hats and 3 peak caps. In the bottom foreground is a small monkey. 4. Group portrait of soldier patients and nurses. 11 men and 4 nurses. The three in front are seated.1. xx 2. On rear - To Dear Auntie from Walter McGillivray. 3. On rear - Thomas Robert Jones 6 Bn 1914, 5 Re-inforcements. No. 1982 23 years Tom Jones and mates. 4. On rear - Edwin W Jones 3511 46 Bn "Snap of some of the ward taken in the garden. I am on the very end, taken the first day I was allowed out of bed," On front is a card and name Ned.passchendaele barracks trust, photographs, ww1 -
Warrnambool and District Historical Society Inc.
Boot, Charles Rogers
These boots belonged to Captain Charlie Rogers of the Australian Army who wore these and ceremonial regalia when he was part of the Guard of Honour during the visit of the Duke of Gloucester in 1934. The visit was part of Victoria’s centenary celebrations and the Duke officially opened the Melbourne Shrine of Remembrance. Rogers was a well-known Warrnambool identity in the 1930s, 40s and 50s as a horseman and an Army identity. He built a house in Birdwood Avenue, Warrnambool, in 1935 and was a long-serving Warrnambool Show official as a judge of equine events. Rogers died in 1961. These items are of great interest as examples of the boots worn by Army Lighthorse personnel in the 1930s. The mechanism for keeping the boots in good condition is of some technological interest. They are also of interest because they belonged to a well-known 20th century Warrnambool person. These are two knee-high brown leather boots with brown laces. The boots are slightly scuffed. Inside the boots are two pieces of red-striped canvas. The boots have wooden inserts to support the boots in storage. These wooden inserts, all varnished, are in four pieces - a solid foot shape to fit in the foot of the boots, two pieces shaped to fit the calf of the leg padded with green felt, one with slight indents at the top and the bottom and the other with a decided groove and the centre piece that has a hole cut out to fit the shape of the other two. This last piece has a wooden handle with a metal attachment. There is only one handle as it can be screwed out and fitted to either wooden insert. On the two wooden inserts ‘R ‘ for right and ‘L’ for left, marked twice on each insert.charles rogers, duke of gloucester, warrnambool -
Warrnambool and District Historical Society Inc.
Tea, Tea Caddy, Mid 19th century
This tea caddy, an attractive item, was given to Margaret Fletcher (date of presentation unknown). A tea caddy in the 19th century was a valued object as tea was expensive and was bought in small quantities. The two side containers are for green and black tea and the middle one was for blending the tea mixtures. The caddy was lockable so that domestic workers etc could not have easy access to a valuable commodity. The local provenance of this object and the identity of Margaret Fletcher have not yet been established. She may be related to John Fletcher, the Warrnambool cordial maker or James Fletcher, the Warrnambool lawyer. This tea caddy is of great interest as an attractive artefact from the 19th century and as an example of a household item no longer in use. It is also of interest because it was given to Margaret Fletcher, possibly a local Warrnambool person. This is a polished wood container made in a casket style. The wood is believed to be Coramandel. The casket has curved sides and is on a base with four legs. The lid has a brass hinge and a gold lock with the key and the lock mechanism missing. Inside are three compartments, two with hinged lids with leather tops and zinc linings. The middle compartment has a glass container set in a wooden compartment. The inscription is on a brass plate inside the casket. ‘Presented to Margaret Fletcher as a Mark of Respect’. margaret fletcher, history of warrnambool -
Kiewa Valley Historical Society
Tripod
This tripod was used to measure the height of distant points relative to a known point used in surveying and construction. The older levels consist of a telescope fitted with a spirit level and, generally, mounted on a tripod. Modern levels are automatic.This tripod was used in the Kiewa Valley by a Mt Beauty resident.Wooden tripod with pointy ends and with metal hinges at the top to collapse. It has a leather strap attached by a button press stud towards the pointy end. This is to enable the legs of the tripod to be fastened together. cowley tripod; surveying; kiewa valley; -
Warrnambool and District Historical Society Inc.
Camera tripod and case, Early 20th century
This item belonged to Dr Horace Iles Holmes (1877-1959). He was born and educated in Tasmania and completed a medical degree at Melbourne University. He commenced a medical practice in Warrnambool in 1906 and was the Honorary Medical Officer at the Warrnambool Hospital and Warrnambool’s Health Officer. His practice was at ‘Ierne’ at the corner of Spence and Kepler Streets. Dr Holmes was an early member of the Royal Australian College of Surgeons and was prominent in Warrnambool community affairs (foundation President of the Warrnambool Rotary Club, a member of the local Masonic Lodge for over 50 years, a Warrnambool Hospital Committee member, a long-term Trustee of the Warrnambool Methodist Church and President of the Lyndoch Hostel for the Aged Committee). Dr Holmes also had many recreational interests, including fishing, bowls and golf. This item is of considerable interest as one coming from the collection of Horace Iles Holmes, a doctor who was prominently associated with the professional and community life of Warrnambool for well over 50 years..1 This is a cylindrical-shaped brown leather case with white stitching along the sides and at the ends. The top end has a leather lid attached to the body of the case with a metal pin. The leather attachment here is broken away. On the side of the case is a leather handle. The case is much scuffed. .2 This is a metal tripod with three legs and pointed ends for embedding into the ground area. The three legs sit on a rounded metal top with a screw for attachment to a camera. The metal top has white printing. The top part of the tripod is slightly rusted. ‘Normal Marque Deposee’warrnambool, dr horace holmes, photographic accessories, history of warrnambool -
Warrnambool and District Historical Society Inc.
Spats, Early 20th century
... leather shaped to fit the lower calf of the leg. They have leather... calf of the leg. They have leather straps and metal buckles ...These spats appear to be part of an army uniform and may have been worn by a member of an Australian Lighthorse unit. The Victorian Mounted Rifles was established in 1885 by Colonel Tom Price who lived in his retirement years in Warrnambool. Many members of the G Company Mounted Rifles from Warrnambool and district enlisted in World War One and served with distinction in the Victorian Lighthorse units which evolved from the Mounted Rifles units. These spats are retained as they are possibly part of the uniform of an Australian Lighthorse soldier early in the 20th century and may have local provenance.These are two spats or leggings made of stiffened brown leather shaped to fit the lower calf of the leg. They have leather straps and metal buckles at the top end. australian lighthorse regiments, spats, history of warrnambool -
Bendigo Military Museum
Uniform - LEGGINGS, LEATHER, J. Oakman, 1939
... ) Right legging .2) Left legging. Each legging has a long leather... legging .2) Left legging. Each legging has a long leather strap ...Part of the Leo Reoch Cohn Collection. See Catalogue No. 5527.2 for his service record.Pair brown leather Australian Light Horse leggings - .1) Right legging .2) Left legging. Each legging has a long leather strap for winding around the legging before being secured by one of two brass buckles. The top of each legging is secured with a brass hook and a short leather strap and brass buckle.Stamped on the inside of both .1) and .2) in black ink: '15' Stamped on the outside of .1) and .2) at the top near the buckles: 'J. OAKMAN, 1939, 15, S (upwards arrow)'.australian light horse, uniform, leggings, leo reoch cohn -
Bendigo Military Museum
Book - FRENCH CONVERSATION, 1895
The book contains verse in both French and British. The name in black handwriting. Joseph Akeroyd had previous Military service before enlisting in the AIF. Enlisted 11.5.1916 age 33 years 5 months in C Company 38th Bn with the rank of Capt. Embark for England 20.6.1916, embark for France 22.11.1916, WIA 27.2.1917 multiple wounds listed. At various times in his records as : GSW face, chin, eye, Right arm, shoulder, fractured Tibia, left leg etc. RTA 21.7.1917, discharged from the AIF 5.2.1917 medically unfit.Book multi coloured hard cover red leather spine binder with 244 pages.Inside on 3rd page, “J Akeroyd Capt 38th Battalion 10th Inf Brigade AIF"books, french, 38th bn, passchendaele barracks trust -
Bendigo Military Museum
Uniform - TROUSERS & BRACES, BATTLE DRESS, Oxford Clothing Company Pty Ltd, 1973
Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection..1) Khaki battle dress trousers in wool fabric with pleated front. Waistband and pockets lined with light khaki cotton drill fabric. Wide waistband secured with three brown bakelite buttons Inside the waistband are six brown bakelite buttons used to secure braces. On each outer side of the waistband are two tabs with metal fasteners used to adjust the waistband. Extra buttons are sewn onto the outside of the waistband. A zipper fly is on the front of the trousers. Pockets consist of two hip with button down flaps, two lined side and one left leg cargo with button down flap. A light khaki heel protector is sewn into the hem of each trouser leg. .2) Set khaki elastic and leather braces are attached to the trousers via khaki coloured leather button attachments..1) On white calico manufacturer's label - stamped in black ink: 'YF 34". Handwritten on manufacturer's label in black ink: 'PADRE Tom, 556101'.un iform, battle dress, army chaplain, major thomas b. williams -
Bendigo Military Museum
Uniform - JACKET, Kings Taylors (QLD)
Herbert Rex WILLIS Regt No 342872, Regular Army, served Vietnam with 161 Independant Reconnaissance Flight from 29.4.1966 - 10.5.1967Jacket - Polyester/Wool, Black, gold coloured buttons, Service ribbons, Insignia badge, Braided Australian Coat of Arms on shoulder. Trousers - Polyester/Wool, Black, Red stripe down outside of each leg. Braces - Elastic, striped, metal clips, leather button attachments to trousers.Service Ribbon Bar Braided Australia Coat of Arms on each shoulder. Insignia Badges on collar of Jacket.uniform, raaf -
Bendigo Military Museum
Uniform - LEGGINGS, LIGHT HORSE
leggings or gaitors were part of the uniform issued to soldiers to help protect their legs and uniform. The idea is to wrap around lower legs. It is believed the original owner was called "Pitt".Dark brown leather leggings with 2 leather straps to tighten around legs. Two straps - first one wrapping around leg 3 times to tighten. Second strap - small one at the top of the leg to hold it firm. Two metal studded loops at back to loop straps through.Stamped "Pitt 1941" also "15" and "H" on both leggings.leggings, uniform, ww1 -
Bendigo Military Museum
Uniform - MESS DRESS, ARMY CHAPLIN, A.G.C.F, 1987
Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection..1) Black woollen trousers with a purple stripe down the outside of each leg. Zipper fly. Calico manufacturer's label sewn onto the inside of the waist band. .2) White elastic braces with leather attachments for securing to trousers. .3) Black woollen waistcoat with four gold coloured buttons, each bearing a Christian Chaplain's insignia. .4) Black woollen mess jacket with purple lapels, cuffs and epaulettes. Black nylon fabric lining. Gold crucifix on each lapel. Major's insignia on each epaulette. Gold coloured buttons each bearing a Christian Chaplain's insignia. .5) Black fabric bow tie with clear plastic clips for fastening to a collar.Handwritten on trousers' manufacturer's label in black ink: '556101'army chaplain, uniform, mess dress, major thomas b. williams