The building was the residence of the engineer who was responsible of managing the early electric supply that was installed in Sunbury in 1909. The town's power supply put an end to gas lighting that had been used and homes had the benefit of having electricity connected to their homes. In 1926 the State Electricity Commission took over supplying electrical power to Sunbury. The cottage is now a private home and the power house building has been demolished. he complex occupied land on the corner of Jackson and Shields Street.At the time the electric supply was installed in Sunbury in 1909, few small country towns had electric power connected.A non-digital scanned coloured photograph with a narrow white border of a small double fronted wooden cottage with a corrugated iron roof with trees growing behind the building.electricity, engineer's corrage, jackson street, shields street, power supplies

Established in 1897, Baker and Woods were initially electricians. The property in Hargreaves was taken over by a saddler and Baker and Woods moved to premises at 313 Hargreaves Street. The business expanded to include photographic equipment, phonographs and phot development. In 1903, Baker and Woods were responsible for converting the gas lighting in the Bendigo Town Hall to electricity. A fire caused by a short circuit caused extensive damage to the building in 1914.Baker & Woods Electrical Engineers and Photo Stock Dealers. Cream paper with Black print. At the top Hargreaves Street, Bendigo, Docket 221. Bought of Baker & Woods, Electrical Engineers and Photo Stock Dealers. Written in Pencil on the Docket is *Prairie. July 18 1914. Mr J. R. Stephens. Items listed:- Developing Film 1/6, Printing 24 Postcards 3/- 6/, postage -4p = 7/10. On the back written in blue biro is - 1290B. Box 625business, retail, photography, hargreaves street bendigo. baker & woods.

Established in 1897, Baker and Woods were initially electricians. The property in Hargreaves was taken over by a saddler and Baker and Woods moved to premises at 313 Hargreaves Street. The business expanded to include photographic equipment, phonographs and phot development. In 1903, Baker and Woods were responsible for converting the gas lighting in the Bendigo Town Hall to electricity. A fire caused by a short circuit caused extensive damage to the building in 1914.Baker & Woods Electrical Engineers and Photo Stock Dealers: Cream paper with black print. At the top is *Hargreaves Street, Bendigo 1914. Brought of Baker & Woods, Electrical Engineers and photo Stock Dealers. Docket no. 221. Hand written in pencil is Prairie. Mr J.R. Stephens. Items purchased were:- 1 No. 3 A film, 6 Exposure cost 1/9. Dated July 18th 1914. Box 625business, retail, photography, hargreaves street. baker & woods.

Mrs Jessie Beardmore, wife of the Shire President, Mr Henry Beardmore, was invited to switch on the electrical current at the power house in Wodonga on 15th January 1912. This was not the official opening of the newly installed system which took place a few weeks later. Disagreement existed amongst Shire Councillors about the official opening, several of them including Mr Beardmore believing the opening should only take place when the scheme was completed. However Dr Schlink, Mr D. M. Stavely, Cr Twomey and Mr C. Holloway, Engineer for the Electric Lighting Company, arranged a small ceremony to turn lights on for the first section of the scheme. This included street lighting along Sydney Street between South Street and the Shire Hall as well as a few business houses and private establishments, with the balcony of the Terminus Hotel illuminated by over 100 lights. Other areas and buildings were connected over the following weeks. Mr Beardmore was not present at the beginning of proceedings but joined the crowd in the street. During a small number of speeches, credit for his work to instigate and further the introduction of electricity to Wodonga was given to Councillor Twomey, referred to as “the father of the scheme”. This item is significant because it records the first connection of electricity to Wodonga in 1912.A hand written letter addressed to Mrs Beardmore of Wodonga. A portrait of Mrs Beardmore is also included. A transcript of the letter is included below. Wodonga 15 -1-12 Mrs Beardmore Wodonga Dear Madam, Mr Holloway, Engineer for the Electric Lighting Company, has invited me to invite you as the wife of the Shire President to switch on the electric supply for the town at the power house not later than 8.30PM (this evening). Hoping that you and Mr Beardmore can make it convenient to attend. I remain yours sincerely, R. H. Schlinkbeardmore family, electricity in wodonga

Report or Programme for the Sunday 20th October 1991, PTC Open Day 23 A4 photocopied sheets + A3 folded drawing stapled in the top left hand corner titled "Electrical Engineering in the PTC 1906 - 1991". Describes the history of electric traction systems and engineering in Victoria for both rail and tram operations, overhead wiring systems, lighting and power supplies, with photos of Newport Power Station, Jolimont, Camberwell, Preston tramway substations. The last sheet has a drawing, poor quality of the 1500V DC railway traction system.trams, tramways, ptc, overhead, substation, electrical engineering, electric traction, open days

Instruction - 5 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Duties of Electrical Mechanics - Runningsheds" Details electrical work to be done on tramcars at the 100 hours service; trolley pole, electrical equipment, controllers, switches, resistance boxes, line breakers, RC units, motors, governor, compressor, lighting, buzzers, door engines, wipers, brake cylinders and general body eg handrails. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures

Photocopy of an article from The Commonwealth Engineer, dated 1/8/1917, titled "Electric Lighting of Melbourne Cable Cars". Describes the battery system, the number of cars, the use of a motor generator at each depot, the lamps and the system on each car. Also has a start of a short item on the Kalgoorlie Electric Tramways Annual report. Short report in the same journal, 1/11/1917 titled Electric Lighting for Melbourne Trams", about a contract issued by the Tramway Board to the General Electric company for approximately 40,000 pounds. Also has an item about King River hydro electric power and the standardisation of the electrical industry.trams, tramways, cable trams, tramcars, lights, depots, general electric

Exercise book with personal notes on tramcar maintenance, operations, recovery etc of C. Willoughby in a Spicers Tudor Exercise book - 64 pages with arithmetical tables on the rear cover. Topics covered: Rail Grinder - details on how to operate and maintain it North Fitzroy Dick Kerr, Clyde, K35 and RC2 Controller sequences and diagrams - notes on testing and faults Buzzer wiring diagrams Maintenance of trams interiors and rooves - items to be checked for Line Breakers Lighting Circuits Compressors Trolley poles etc Air operated doors Re-railing of Maximum Traction trams - 22E ditto for equal wheel bogies ditto when split points Use of false trucks Derailments on the Royal Park line Electrical equipment faults Adjusting Trolley Poles heights and tension Notes on truck types and braking Brake diagram summary, giving specifications and a list of relevant drawings Forms for the insulation testing of the Rail Grinders Checking motor leads and electrical equipment - written on the rear of a St Patrick's Day Procession notice for 1962. Advice from Neil Elfick, 23/6/2018 knew him when the Running Shed Foreman at Kew Depot.trams, tramways, tramcars, faults, controllers, 22e trucks, derailments, accidents, royal park, grinder, notices and information, st patricks day

Set of four drawings of electrical and brake equipment on VR Tramcars. .1 - No. 1 - Bogie car wiring diagram - shows all equipment including lights, compressors, motors and switches. Has a different lighting circuit for the 52 to 54. 4 copies held. .2 - No. 2 - Air and Brake Equipment (Excluding one-man car) - shows all equipment including wipers, conductor's brake valve .3 - No. 3 - Pneumatic Equipment for One-man car - shows all equipment including door engines, emergency valves, emergency reservoirs, door valves and links to controller. .4 - No. 4 - Pneumatic Door Equipment - cars 52 to 54 - including door controller valve positions.trams, tramways, vr class tramcars, victorian railways, brakes, wiring diagrams, one man trams, air compressors

Set of 12 reports, photocopied onto heat sensitive paper from various magazines. Documents match the image numbers. .1 - 2 pages, from The Commonwealth Engineer, 1/10/1917 - "New Cars for the Melbourne Brunswick and Coburg Tramways", written by Straun Robertson. .2 - 2 pages, from The Commonwealth Engineer, 1/3/1919 - "Double Bogie Combination Tram Car - St Kilda Brighton Electric Line". .3 - 2 pages - Electrical Engineer - 15/6/1924 - "One Man cars for Melbourne and Geelong Vic. The Brill Birney Safety Car" .4 - 1 page - Electrical Engineer - 15/11/1925 - "Standard Car for Melbourne Tramways" - has sketch of W2 369. .5 - 2 pages - Electrical Engineer - 15/8/1927 - "New Bogie car for Melbourne Tramways" Y class. .6 - 2 pages - Electrical Engineer -15/3/1936 - "Tramcar of New type for Melbourne - Large car for Two-man or One-man operation" - Y1 class .7 - 3 pages, The Electrical Engineer and Merchandiser - 15/3/1932 - "Modern Tramcars for Melbourne - Design for reduction of noise and construction with electrical Welding" W3 class. .8 - 2 pages, The Electrical Engineer and Merchandiser - 15/11/1933 - "New Tramcars for Melbourne" - has sketch of the W4 class tram. .9 - 3 pages, The Electrical Engineer and Merchandiser - 16/12/1935 - "Melbourne's Lates Tramcars, comfortable Accommodation and modern traction equipment" - W5 class .10 - 3 pages - The Electrical Engineer and Merchandiser - 15/3/1939 - "Improved Type Tramcar - advanced truck design, pneumatically operated doors, special lighting, acceleration 3pmh per sec." SW5 class. .11 - 3 pages - The Electrical Engineer and Merchandiser - 15/9/1950 - "Noiseless Tramcar - first Australian Vehicles - Bogies fitted have special noise reducing features - motor drive through bevel gears, dynamic braking" - PCC 980 (See also Reg Item 5601 for a similar report) .12 - 1 page - handwritten on the rear of a copy of item 11 - Editorial from the Oct. 1951 issue of same magazine looking at the rate of acceleration. Reprint of .7 added 30/7/2019, from papers ex Robert Green - in poor condition, has been folded, both left and right hand edges in multiple tears. The photos are good. Measures 282H x 220W.trams, tramways, mmtb, mbctt, new tramcars, vr, bogie trams, birney, x class, w2 class, y class, y1 class, w3 class, one man trams, w4 class, w5 class, sw5 class, pcc class, tramcar design, electrical engineering

Memorandum - yellow paper titled "Visibility of tramcars at Night" .1 - foolscap sheet from the Designing Engineer Mechanical and Electrical to the Chief Engineer, dated 23/3/1960 outlining four proposals for improving the visibility of trams at night, signed by B. J. Roberts. .2 - half foolscap sheet - from Chief Engineer to the Chairman, forwarding report and asking what further action to be undertaken - signed D. Eakins and dated 25/3/1960.Has number "102553" and "6704" on original memo.trams, tramways, mmtb, tramcars, lights, tramcar equipment, night lighting

Set of two instructions, duplicated foolscap sheets. Both signed by H. A Wilcox, General Manager. .1 - "Rules and Instructions for Gripmen and Conductors re Electric Lighting of cars and dummies", notes care for lamps, battery leads, failure, electric shock (7 volts) and cautions. Two sheets, Two copies held. Dated 1/3/19. .2 - "Edison Car lighting system - rules for the guidance of employees" - 4 sheets with brass pin in top left hand corner, giving details of connecting the batteries for charging, charging, battery car, methodology of using the rheostat, cleaning, jumper cables, reports, faults and contact electrical foreman Mr. T Dawe. Not dated.trams, tramways, lights, cable trams, batterymen, equipment

Report - "W class Tram Modernisation" from the ttmrail webpage, 2 A4 sheets stapled in top left hand corner, details the changes - DC Traction chopper system, controllers, inverters, controls, drivers cabins, lighting and drivers and saloon heating systems.trams, tramways, ttm rail, braking, electrical equipment, electrical systems, electrical engineering, controllers, w class

Item used to switch on or off the red tail lights circuit on a tram. Made by the SECV. The board was located next to the 6V battery that was used to power the tram tail lights when the trolley pole was being reversed under a passenger seat.. Demonstrates an item fitted to a tramcar to switch an external lighting circuit.Softwood wood board with a bakelite two pole switch marked "on" and "off" and a Federal 250V 15A rewireable ceramic fuse attached. Has remnants of cloth covered copper wire on the rear. See item 9024 for an associated drawing."12" in blue pencil.fuse, tram 14, tramcars, tramcar maintenance, electrical switching

Item used to switch the power for the red tail lights circuit from the trolley pole to the battery circuit when the trolley pole was being reversed and not able to provide power to the internal and external lights. Made by the SECV. Salvaged from tram 14 during the project to renew the wiring and electrical arrangements of the tram. The box was located adjacent to the driver's windows and would click when the trolley pole was placed back on the overhead.Demonstrates an item fitted to a tramcar to switch an external battery tail lighting circuit.Wooden box made from softwood with bevelled corners, plywood top painted green containing an 8 Ohm "Post Office" type relay (see reference) fitted with two "break" contacts and associated insulated wiring soldered to the relevant contacts. See item 9024 for an associated drawing. Two examples held.fuse, tram 14, tramcars, tramcar maintenance, electrical switching

Yields information about the training of crews.Instruction or question sheet - foolscap carbon copy, titled "Questions to be answered by Birney Car Students", giving 18 questions, about electrical path, controllers, lighting, stopping the tram, faults, sand, leaving the tram, draw bar, purpose of the two trolley poles. Two copies - one copy dated 15/8/19245 - suggesting it was made for Geelong by MESCotrams, tramways, birney, mesco, instructions, training

Donors of the four floodlights for the Kangaroo Ground Shire of Eltham war memorial tower. Lighting is provided three hours each night, free from TXU Electrical (Contained in an album originally put together by Harry Gilham. Photos subsequently relocated to photosafe archival storage.) [2001]Colour photographkangaroo ground, war memorial tower, floodlights, kangaroo ground war memorial park