Copies of some pages titled Birthplaces of the People. Tables are divided into each shire under the heading of Bendigo. Birthplaces are divided into British Possessions including Victoria and Foreign Countries including France and French Colonies and Other Fountries, At Sea and Unspecified. Bendigo is divided into Sandhurst City - -?- Ward and Sutton Ward, Eaglehawk Borough and Raywood Borough. Marong Shire is divided into North-West Riding which consists of Newbridge Township, Goldworkings and Outside Township and Goldworkings, Bridgewater Township and Myerstown Township. North-East Riding consists of Kangaroo Flat -?- Goldworkings, Eaglehawk Gully Goldworkings, Eaglehawk Flat Goldworkings, Butcher'sHill Goldworkings, Deadhorse Flat Goldworkings,Myers' Flat Goldworkings and -?- Flat Goldworkings. Maiden Gully Goldworkings, Kangaroo Flar Goldworkings, Epsom Township, Neilborough Township, Whipstick Goldworkings, -?- Goldworkings, Sebastian Goldworkings, Sydney Flat Goldworkings, other Goldworkings, Outside Townships and Goldworkings. South Riding of the Marong Shire consists of Ravenswood Township, Big Hill Township, Grusoe Gully Township, -?- and Lockwood Township. Strathfieldsaye Shire consists of the East Riding and the West Riding which consists of Milkmaid Flat Goldworkings, Diamond Hill Goldworkings, -?-, Sheepwash Gully Goldworkings, Spring Gully Goldworkings, Tin-pot Gully Goldworkings, Golden Gully Goldworkings, Kangaroo Flat and Gully Goldworkings and Outside Goldworkings. Huntly Shire consists of the Huntly Township, Huntly Goldworkings, Ascot Township, -?-, and Outside Townships. Each table lists the number of Persons, Males and Females and the places mentioned earlier where they were born. Black marks on paper make some of it unreadable.bendigo, history, long gully history group, the long gully history group - birthplaces of the people - marong, huntly & strathfieldsaye

3293.1 - Grey folder, with a two prong clip, marked ""Rosters both sides, containing a set of 29 sheets, typed on foolscap paper, giving the Weekdays, Saturday and Sunday tables or runs for the SEC Ballarat trams on the SEC Ballarat Tramway system until the period before closure. Gives details of 38 tables or runs, numbered from 1 Run to 38 Run. Each sheet headed "Weekday", three runs per sheet. Saturdays - 1 to 34, Sunday - 1 to 10. Each sheet has in the top right hand corner LJD/3/70. Time table operated until the commencement of closure of the system. All sheets imaged and are: Monday to Friday Runs 1- 3 4-6 7-9 10-12 13-15 16-18 19-21 22-24 25-28 29-30 31-33 34-36 37 and 38 Saturday Runs 1- 3 4-6 7-9 10-12 13-15 16-18 19-21 22-24 25-28 29-30 31-33 34 Sunday Runs 1- 3 4-6 7-9 10 Each run details where the driver/conductor would sign on, time, the trips, meal breaks, finish time and the total time of the shift. See also Reg Items 2984 - 2993 for table cards at the time of closure. 3293.2 - separate sheet in front of folder, was taped to folder, giving distance of the various routes within Ballarat - miles. Now loose within folder. Second copy of this sheet added 3-8-2006, BTPS Cat No. 611. - See image btm3293i31 for image file. Images of all sheets added 31/8/2012.On front of folder in black ink " BTPS 811" and on top of 3293.2 - "BTPS 611"trams, tramways, timetables, sec, ballarat, crews, routes

The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius computer was built in a period of rapid growth in computing technology. The first stored program computers appeared in the late 1940s and used individual designs with valve technology. By the mid-1950s valve technology was replaced by transistors and the first mass produced commercial computers became available. The Ferranti Sirius was announced in 1959 and offered a “small” academic computer. It was designed and built by the English company Ferranti Ltd and sold through a local office of the company in Melbourne. The Sirius was manufactured at the Ferranti Ltd.’s West Gorton, England factory from 1959 to 1963 and, in all, the company produced probably 22 installations although only 16 were actually recorded as sold; this included one at Ferranti’s Bureau in London and one at Ferranti’s Melbourne Bureau. Only 7 were exported and 4 of these 7 were located in Melbourne, Australia. All four were associated with computing at Monash University – the Sirius in the MMoCH collection was purchased by Monash University in 1962, a smaller Ferranti Sirius was used on the Caulfield campus (prior to amalgamation with Monash University) from 1963, the Ferranti company had its own Ferranti Sirius initially temporarily installed at Clayton campus in 1962 and then placed in their office in Queens Road, Melbourne. A fourth computer was purchased by ICIANZ (now Orica) in 1962 and was transferred to Clayton campus in 1967. Only two of these Melbourne examples have survived; one in the MMoCH collection and one at Museums Victoria. There is an example of the Ferranti Sirius in the Science Museum Group collection in the UK as well. The Ferranti Sirius in the MMoCH collection was the first computer purchased by Monash University and it was shipped to Australia to be installed by November 1962. The University had a similar model computer on loan from Ferranti Ltd during the first part of the year and it was returned to the office of the company in Queens Road, Melbourne once the University’s own machine was installed. The computer was placed on site at Clayton campus, Monash University. The computer operated from 1962 until 1972 when it was officially decommissioned. The Ferranti Sirius was sold to Mr Paul Stewart in late 1974 and removed from Monash University. Mr Stewart later donated the computer back to the University in 1988 and it was transferred to the collection of the Monash Museum of Computing History after 2001. The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius is of scientific (technological) significance as one of the early transistor digital computers that transitioned computing from first-generation valve computers to second generation commercial installations. This example of the Sirius is of historical significance in its role as a part of the Computer Centre, Clayton campus, Monash University which provided computing facilities in Melbourne in the early 1960s when there were few installations available for academic, administrative and commercial users. Staff and students were able to undertake investigative research and learn programming techniques. The Computer Centre encouraged the use of the computer across all disciplines and this provided the base to establish computer science as a subject offering and, later, a new department in the University. This growth in computer education eventually culminated in the establishment of the Faculty of Information Technology, Monash University. The Ferranti Sirius in the collection at Monash Museum of Computing History has a main unit with a CPU and memory combined with input/output equipment and one extra cabinet of memory. The Central Processing Unit is a floor-standing unit which contains the computer circuits, power supplies and has a decimal digit display panel and a normal clock. A moveable control panel is placed in front of the Unit (Currently set on a recreated desk/filing cabinet support in the display). The Sirius base unit uses acoustic delay line memory with 1000 word store. An additional 3000 word memory cabinet is set adjacent to the CPU and can be connected to increase the memory. The computer is supported by a range of input/output devices. There is a Ferranti Paper tape reader, located on desk in front of CPU. Red label on front “Ferranti tape reader. Type TR 5. Serial No. 477”. Adjacent to the CPU is a set of Simplified tape editing equipment in three pieces which includes a (1) Table unit with switches on front face. Metal tag on reverse reads “Creed & Co. Model No. S4060. Serial No. 1457. Original Customers Marking GRP7 V706”. The table has a numbered internal tag “Table Serial No. 198579. (2)Creed teletype set on table unit. Metal tag on reverse “Creed & Co. Model No. 75RPR K4M4. Serial No. 5897 Made in England”. (3)Creed paper tape reader set on table unit. This set of equipment could read paper tape and print it, or copy paper tape while allowing it to be edited, or allow a programmer or data preparation person to type and punch a new program or data. It has no electrical connection to the computer. Paper tapes were usually torn off and carried across to the computer. There is also another table unit with switches on front face and changeable setting switch on front right side which holds a Ferranti Westrex paper tape punch set. Label on reverse “Teletype Code BRPE11” This was the Computer’s only output device. BRPE-11 is a teletype model number.

This type of logbook was issued by the Royal Australian Air Force to non-pilot aircrew to record their flight hour and experience. This information was required for official administrative purposes. The book is incompletely filled in as recorder was "Discharged on compassionate grounds".This book is a useful reference tool.A blue, hard cover log book with details of R.A.A.F. observer/ air gunner/ telegraph operator/ radio operator, used to record exercises from bases in Victoria and South Australia. Inside, each page is printed with a table. Each column in the table has a title, 'Date', 'Hour', ' Aircraft Type and Number', 'Pilot', 'Duty', 'Remarks', 'Flying time / Day / Night'. The table has handwritten entries. air-transport flight-information royal- australian-air-force

The photo is taken in 1934 and illustrates the internal view of a ward in the Mental Hospital at Beechworth. Some patients in beds and three nurses are in view. Beds were arranged in lines alongside the walls and there were no partitions or screens to create privacy for patients. Furniture was simple and humble; bed frames were made of metal or wood and pillowcases and covers for the attendant`s tables were sometimes made of blue-striped canvas or calico. Large windows in the walls were offering ample light and the room was well-tended, with Christmas decoration, flowers, pots and carpets on the floor. The nurse in the foreground is Miss Neary. The Mayday Hills Hospital was constructed between 1864 and 1867, with buildings created in a number of periods. It formally opened on 24 October 1867 and, along with the Ovens Hospital and the Benevolent Asylum, made Beechworth a prominent social welfare centre in Victoria. The need for an institution of this kind was arisen due to the increased number of people with mental disturbances (induced by the harsh living conditions on the goldfields) and the remoteness of the district from Melbourne. The site was chosen for its panoramic view of the countryside, the hilltop atmosphere and the native fauna, all contributing to the cure of patients. The Hospital was originally named the “Ovens Lunatic Asylum” but, during the centenary celebrations in 1967, the name was officially changed to “Mayday Hills Hospital”, showing the gradual shift in the perception and understanding of mental health conditions over the last decades. The Hospital lies on the traditional land of the Kulin Nation. This photograph is historically significant as it provides an insight into the living conditions of patients admitted to the Mayday Hills Hospital at the beginning of the 20th century. It also contributes to the understanding of the district`s development and its importance to the course of Victoria`s history. Additionally, it provides important information about the way mental health conditions were perceived at that time and how patients were treated. Black and white rectangular photograph printed on paper. Reverse: 1997.2665/ To Miss JA.Peach/ [hallmark: Printed by Harringtons]/ With best wishes/from/H.Jeanes/for 1934.mayday hills hospital, benevolent asylum, ovens hospital, ovens lunatic asylum, kulin nation, beechworth, patients, nurse, social welfare, goldfields, melbourne, mental health, living conditions, blue-striped canvas, calico, bed frames, miss neary, mental disturbances, traditional land, centenary celebrations

The photos are of one of the last Annual Bendigo RSL Dinners held in the SMI, this is most likely 1998/2000. The Dinners moved to the Bendigo District RSL Sub Branch Inc at Havilah Road about 2001. There are a number of easily identifiable members in the photos. .1) Centre Table, Fred Addlem, Kevin Purdon, Kell Howard, Peter Ball. .2) LH table, Joe Boulton, Ernie Jackman, Jack Fay. Fred Addlem, Refer Cat No 8128P for Committee history, he was also a dedicated Museum guide from 1998 to 2003. Kevin Purdon, has been a Museum Guide since 2009 to current, Appeals for many years and delivery to and pick up from schools. Laurie schilling committee member 1992 to 2000, museum guide from 1998 tp 2015. Kell Howard committee member 1976 to 1981, 1985 to 1990. Peter Ball, refer Cat No 8071.3 Joe Boulton, committee member 1999 to 2000, Appeals Officer with his wife Lyn from 2004 to 2012. Ernie Jackman, committee member 1961 to 1962, 1973, Welfare Sub Committee 15 years, Welfare Officer 1997 to 1978, Appeals Officer 1960 to 1994, organised the distribution of parcels to homes and hospitals at Xmas, made a Life Member 1986. Jack Fay, refer Cat No 8129PTwo Colour photographs re Bendigo RSL Annual Dinners taken from different angles showing 3 lines of tables set up. These photos are one of the last Annual Dinners held in the Soldiers Memorial Institute. The photos show the Museum memorabilia around the walls.brsl, smirsl, annual dinner

This is a coloured reproduction print of an original Plane Table compilation map sheet of Nagambie area 1inch to 1 Mile scale compiled by Sgt Jack Cullen Australian Survey Corps 30 September 1921. Jack was one of the foundation members of the Australian Survey Corps. Of particular interest is the fact that this is a heighted compilation with contouring (required for Military use) as many early maps were purely planimetric. A table on the right hand side details the number of days that it took to produce the compilation. The reverse side of this print is a copy of the Tallarook plane table South East field sheet.Reprinted coloured Image of Australian Topographical Survey NAGAMBIE SW Sheet,1 inch:1 Mile, NW portion hand drawn Plane Table Field sheet. Includes an itemized summary of work, signed by Sgt J Cullen Australian Survey Corps September1921.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

This is a set of seven photographs of map grid production using co-ordinatorgraphs at the Army Survey Regiment, Fortuna Bendigo. c1960s to 1970s. The Aristo Co-ordinatorgraph introduced in 1962 was a large heavy steel framed light table with a scribing head that moved in a XY direction using a vernier calibrated measuring scale to 0.001 of an inch. Whilst hand operated it was much quicker and accurate than manual grid and graticule calculation, plotting and scribing. Mapping PNG presented the Regiment with many challenges. WO1 Farrington and CPL John Dean developed computer software for the digitally controlled co-ordinatorgraph, the Calcomp 718 Flatbed Plotter. Much time was saved by automatically plotted cartographic grids and graticules, and automatically draw base compilation sheets complete with aerial triangulated stereo model control. This could be used for a number of maps and was the first step towards map automation. The history of co-ordinatorgraphs is covered in more detail with additional historic photographs, in pages 50 to 51 and page 88 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. SGT Bill Boyd appearing in photo .1P reach the rank of WO1 and for 11 years was the technical warrant officer at the Detachment Army Survey Regiment located at Bonegilla, Victoria. He was awarded the OAM, the Order of Australia Medal for the development of the Flexiflow quality control system. This system comprised a series of job plans and charts linked to a task allocation to resource magnetic planning board. Using critical path analysis and task prioritisation, complex job planning was efficiently scheduled, and re-prioritisations readily made. Reproduction requirements were effectively coordinated by way of weekly courier to the Army Survey Regiment. Supervisors and technicians fully embraced the system as they could understand their role, others around them and the positive production achievements. Bendigo. See page 178 of Valerie Lovejoy’s book for more information on WO1 Boyd’s contribution to RA Svy.This is a set of seven photographs of map grid production using co-ordinatorgraphs at the Army Survey Regiment, Fortuna Bendigo. c1960s to 1970s. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, black & white, c1960s, L to R: SGT Bill Boyd demonstrating Aristo Co-ordinatorgraph equipment to unidentified technicians (x3) .2) - Photo, black & white, c1960s, Aristo Co-ordinatorgraph equipment. .3) - Photo, black & white, c1960s, unidentified technician operating Aristo Co-ordinatorgraph equipment. .4) - Photo, black & white, c1960s, L to R: PTE Desi Asaris and CPL Kalen Sargent operating Aristo Co-ordinatorgraph equipment. .5) - Photo, black & white, Photo, black & white, c1970s, John Bloor operating Calcomp co-ordinatorgraph equipment. .6) - Photo, black & white, Photo, black & white, c1970s, unidentified technician operating Calcomp co-ordinatorgraph equipment. .7) - Photo, black & white, Photo, black & white, c1970s, L to R: SGT Andy Covington and SGT John Waight operating Calcomp co-ordinatorgraph equipment..7P annotated on back ‘Covington & Waight’.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, carto, air survey

The Grinton Collection. Mess deck laid out on the Karmala coming home. Refer Cat. No. 1280 for Jack Grintons service details.Photograph framed. Photograph - black and white photograph on paper depicting tables with cutlery and crockery and a small number of men in a "Ships Mess". Frame - Timber, light varnish finish, Perspex front, cardboard backing."Group 5: Quota 45 - Journey Home". "B. Ship's Mess".framed accessories, camera on the somme, 38th bn, ww1, grinton, hmat karmala

Report describing the "Jerie" Vertical Block Adjustment for the Townsville 1:250,000 and how the apparatus was designed, constructed and used.Foolscap size, 14 x numbered pages and 10 x unnumbered pages. Stapled left side. Numbered pages printed in purple. Four of the unnumbered pages contain photos while the rest contain handwritten tables and hand drawn diagrams. Annex A: Discrepancies Tables, Annex B: Baseboard Diagram, Annex C to Annex G, Annex H: Photo showing tools which are numbered and listed below each photo. The numbers on each photo are faint but readable. royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

Augustus Bostock was the 9th child of Robert & Rachael Bostock of Vaucluse Epping Forest, Van Diemen’s Land. He was only 4 years old when his mother died. He was inspired by his father to seek his fortune in the Western District of Victoria. He arrived around 1850. He married Margaret Aitkin in July 1865. Augustus owned several properties in the district and leased others. He sat on the court of Warrnambool, Mortlake or Hexham as required. He resided at Marramook in Hawkesdale and later moved to Vaucluse in Hopetoun Road Warrnambool, where he died in 1920 at the age of 87. He was involved in many aspects of life in the Western District, racing, cricket, and social activities to name a few. This statement shows the results of the wool sales for the early 1870’s being fairly strong Lincoln cross but earlier results were more merino This is one of a number of documents which relate to the Bostock family who were one of the most important pioneering families of the Western District. They owned and leased various properties around Warrnambool and were involved in many aspects of social and business life. The document itself is indicative of its time and provides an insight into the details and terms of such documents at the time.White lined note paper with black ink writing. Has table of prices for the years 1870-1874warrnambool, coomete, bostock, augustus bostock, 1870,

The picture on the front of this book depicts the female as the weaker sex unable to understand or work out numbers.This book may have been used in a Kiewa Valley business or farm.Thin soft covered red, black, fawn, brown book with picture of a female sitting down looking at this book while the male points to the ledger as if to show her how (the book) can be used. The book has a list of numbers - a Discount Table - giving how much a number of items cost at a given price. eg. 10 books at 3/- each = 30/-business, money, accounting

This vase would have been used to hold five small flowers or fronds and would have been a decorative item on a dining table or mantelpiece. Today a vase holding one or a small number of flowers is called a specimen vase and the style of these tends to be less decorative than the item described here. This item has no known local provenance but is retained as an example of a household item from the past.This is a white china vase with a central pillar representing the trunk of a tree and (originally) four pillars branching out from the main pillar to represent the branches of a tree. One of these pillars is now missing. The china stems holding the branch columns have embossed flowers and fronds. The main pillar and the branch pillars have irregular-shaped openings for flower insertion.household items, history of warrnambool

Job 56M430 Contractor Hone Wash over road due to blocked table drainRecord of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.infrastructure, shire of eltham, bridge construction, 1959-09, heidelberg-kinglake road, road construction

Job 56M430 Contractor Hone Just south of east abutment and access road to house showing block in table drain and wash towards Diamond CreekRecord of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.infrastructure, shire of eltham, bridge construction, 1959-09, heidelberg-kinglake road, road construction

Job 56M430 Contractor Hone Wash over road due to blocked table drain caused this wash out on embankmentRecord of various Shire of Eltham infrastructure works undertaken during the period of 1952-1962 involving bridge and road reconstruction projects, sometimes with Eltham Shire Council Project Reference numbers quoted. It was during this period that a number of significant improvements were made to roads and new bridges constructed within the shire that remain in place as of present day (2022). In many situations, the photos provide a tangible visible record of infrastructure that existed throughout the early days of the Shire. The album was put together by or under the direction of the Shire Engineer, J.A. McDonald.infrastructure, shire of eltham, bridge construction, 1959-09, heidelberg-kinglake road, road construction

Possibly run in conjunction with the Eltham Community Festival or the Hurstbridge Wattle Festival; the steam train would conduct trips between Eltham and Hurstbridge Railway stations. As there is no turning table at Hurstbridge, the locomotive would simply shunt from one end of the carriages to the other to reverse direction, hence the locomotive is running in reverse as it approaches Eltham Station. The first house in the background on Railway Parade, Number 97, remains as of 2019. The next house, Number 95 has been demolised since April 2018 and new construction in place.Digital TIFF file Scan of 35mm Ilford HP4 black and white transparencyd-639, eltham festival, george coop collection, hurstbridge wattle festival, level crossing, passenger carriage 19bc, railway parade, steam engine, vintage train excursion, wattletree road

Possibly run in conjunction with the Eltham Community Festival or the Hurstbridge Wattle Festival; the steam train would conduct trips between Eltham and Hurstbridge Railway stations. As there is no turning table at Hurstbridge, the locomotive would simply shunt from one end of the carriages to the other to reverse direction, hence the locomotive is running in reverse as it approaches Eltham Station. The first house in the background on Railway Parade, Number 97, remains as of 2019. The next house, Number 95 has been demolised since April 2018 and new construction in place.Digital TIFF file Scan of 35mm Ilford HP4 black and white transparencyd-639, eltham festival, george coop collection, hurstbridge wattle festival, level crossing, passenger carriage 19bc, railway parade, steam engine, vintage train excursion, wattletree road

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. A document titled "Desirable Characteristics of the 21st Century Engineering Graduate" was from the University of Ballarat Division of Engineering and Science, Bachelor of Engineering Course. Page 1 states that Engineering educators should aspire to produce Graduates with a defined set of characteristics - 10 listed. Page 2 relates to the Engineering Course stating it should emphasise a number of key areas - 8 listed. Examples were obtained from Wollongong and Monash. These ideas were then used to formulate 10 characteristics for the University of Ballarat - "The Ideal Science Graduate" Document tabled by Roy Schrieke "The Ideal Science Graduate" 14/03/1995Six A4 pages - typed and with chartsviosh, victorian institute of occupational safety and health, university of ballarat, desirable charcteristics of engineering students, roy schrieke - lecturer, wollongong, monash, engineering and science

This librarian's chair was given to the school by the family of Joy Chapman who had died during 1948. The chair was part of a number of furnishings supplied by donation for the new library which was opened in 1949. These included blackwood shelves, tables and chairs and a new set of Encycopedia Britannica supplied by the Parents and Friend's Association, a grooved periodical table given by Old Collegians Younger Set, a librarian's desk supplied by the E M Bell estate and more than 200 books supplied by the Old Collegians. (see 'A lamp burns brightly' p. 61). This item is a significant example of the degree to which the school relied on donations from the community to develop the school during the post-war years. Solid wood chair with high solid back and solid arm rests. Carved CPLC crest attached to neck rest. Padded seat. Bronze plaque at front of seat. Plaque: In memory of / JOY CHAPMAN / 1947 - 1948 - The Gift of Her / Father, Mother & Ruthc-p-l-c, younger-set, parents-and-friends-association, clarendon-presbyterian-ladies-college, library, joy-chapman

American - Australian Officer Exchange - Mid Tour Report ASR 1981, Major D Bowen US Army Corps of Engineers. A two-year exchange program existed between the Australian Survey Corps and the US Army Corps of Engineers. This is a report by the US Exchange Officer in 1981 half way through the exchange tour.Clear film plastic covers front and back, Light Purple cardboard covers. Contains Cover Letter to American Embassy, Canberra ACT. Page 2 is Information page with references. Table of Contents page. Actual Report is pages numbered 1-19. Booklet "Lansells Fortuna (green cover edition) pages 1-16, only some pages are numbered. Army Survey Regiment Organisation Chart, "Map Production Story"- 8 pages, Bowen to Gram No1- WestPoint to Australia 2 pages, Enclosure 9 - Use Addresses (USA). Armed Forces of Australia - Badges of Rank, Enclosure 5 - Recommended Changes 2 pages, Enclosure 6 - Technical Services R&D Tasks, Married Quarter Floor Plan.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr

Founders Room was disbanded in late 2019 in preparation for a building refurbishment.A number of photos showing the Ballarat School of Mines Founders room, and furniture before it was cleared for the refurbishment of the Administration Building (A Building)administration building, a building, cedar tables, council table, council room, founders room, alfred mica smith, dick richards

A black and white photograph of a number of young adults at a long table at the Ballarat School of Mines Ball. ballarat school of mines, student activities, ballarat school of mines ball

The original Weatherly Library was situated in the space immediately on the left of the archway. The fittings and furnishing of the library was a generous gift in 1936 of Mrs H P Mackenzie of Trawalla in honour of her pioneer parents, Mr and Mrs William Weatherly. The library was panelled with blackwood and fitted with shelves intended to eventually house 3000 books. Specially made solid blackwood chairs, upholstered in genuine hide, two long reading tables, an upholstered bench seat under the north window and an ornate carved mantelpiece topped by a classical broken pediment framing a carved head of Minerva were also donated. In 1971 this library was no longer large enought o serve the growing number of boys at the college; it was replaced by a bigger, separate building, also known as the Weatherly Library. This building is currently in use, and recently renovated, as the senior staff room. In 1993 a third library building was opened and named Erindale in recognition of property associated with Clarendon PLC. In 2012 the school opened the Fraser Library on the senior campus in honour of old collegian and school council chair, Darrell J Fraser. Wooden frames with mounts and glass; both include printed descriptions; one includes a black and white photographh p mackenzie, weatherly library

“FARELF” Far East Land Forces (Malaya) “BCFK” British Commonwealth Force Korea. All photos relate to the collection of Francis William (Dinky) DEAN BEM, VX93960 2nd AIF, 3742 1 RAR 1943 - 1975. Refer Cat No 124.2 for his service history.All photos are B & W. (.1 - .4) Three soldiers sitting at a table with one standing looking over. (.5) Soldier throwing water over himself. (.6) Soldier kneeling with an Owen gun aimed. (.7) Soldier cleaning a weapon. (.8) Two soldiers looking out through an aeroplane door. (.9) Soldier, no shirt on aiming a pistol. (.10) Soldier with a dart or rod in his mouth. (.11) Soldier kneeling aiming what appears to be a shotgun. (.12) Soldier inspecting the bar real of an Owen gun. (.13) Soldier inspecting a pistol. (.14 - .15) Two Nurses talking to two soldiers. (.16) Large group of soldiers on the deck of a ship.(.1 - .15) On rear stamped in purple. “Public relations Australian Army Force GHQ FARELF, GUN ....... MC” After GUN on each photo is an individual number. (.16) On rear stamped in purple. “Photo No, please credit to Public relations HQ BCFK” In pencil. “2961”photography, military, korea, malaya

Black & white group photo of large number of Australian Soldiers seated at 2 long tables bearing beer bottles, glasses & crockery. They are in a large tent. On the tent poles are shields with colours & names of allied countries, Serbia, Canada can be seen. Above photo: “Breakfast Given to Reinforcements Prior to their departure” Below photo: “By the Citizens Camp Committee” October 28th 1915photography-photographs, frame accessories, civic momentoes

A plane table compass, sometimes referred to as a trough compass, used by surveyors and artillery crew to accurately establish magnetic north. The compass is precision machined of brass material with a long needle to ensure accuracy. The compass scale is marked with a centre zero (for magnetic north) and graduations indicating plus and minus five degrees. The compass is housed in a protective wooden case with a sliding lid. The lid has a brass slide which locks the compass needle during periods when the compass is not in use. This compass is the type used by an artillery unit of the Australian Military Forces during World War 2. This compass was manufactured by J. W. Handley P/L of Melbourne in 1943. Refer 00330 and 00330.2The side of the compass body is stamped: "J.W.H." with the letter "V" under a line, "SERIAL No 1082", MARK.II-D^D-1943". The case is stamped with the serial number "1082".artillery, trough compass, plane table compass, compass, world war 2, ww2