Stevenson screens were first introduced in Australia in the 1880s and were widely installed by 1910. The screens have been used to shelter and protect thermometers and other meteorological instruments from rain and direct heat while the holes and double-louvre walls allowed air to flow around them. Sometimes other meteorological instruments were included in the weather stations, so there were different Stevenson Screen sizes. This authentic, original Stevenson screen was previously owned by the Australian Bureau of Meteorology and was used for many years for weather readings at the Cape Otway Light Station in southwest Victoria. The Lighthouse Keepers recorded the readings for minimum and maximum temperatures at 9 a.m. every day from January 1865 until April 1994. The equipment was sheltered in a Stevenson Screen from 1902 until April 15 1994, when the mercury thermometer was replaced by a platinum resistance probe within an Automatic Weather Station (AWS). This Stevenson screen is one of the two screens that then became redundant. The other Stevenson screen was kept to display to visitors. Lightkeepers were no longer required at the Cape Otway Light station either, due to the automated system. The meteorological instruments donated with the screen were used for measuring temperature and humidity. They are mounted on a metal bracket that fits across the screw holes on the screen’s internal frame. The glass-covered Relative Humidity (RH) sensor was made by the renowned precision instrument maker, Rotronic AG of Switzerland, which was founded in 1965. The firm made its first electronic temperature and humidity instrument in 1967. Meteorological records have been collected in Australia from the 1800s. The records were collated, published and used as a basis for weather forecasts. Many sectors, such as maritime and agriculture industries, have relied on these figures for making important decisions. The quality and placement of the meteorological instruments used to measure temperature and humidity are of utmost importance for accuracy. In early colonial times, there were no national standards for meteorological instruments that would allow for accurate figures and comparisons. Once the Bureau of Meteorology was established (around 1908 to 1910) the department installed Stevenson screens throughout Australia, many at lighthouses and light stations, and the measuring instruments were standardised. The Stevenson Screen was named after its inventor, Scottish Civil Engineer Thomas Stevenson (1818-1887) who was also the father of Robert Louis Stevenson, author. Stevenson developed the small thermometer screen around 1867. It had double-louvred walls around the sides and a top of two asbestos sheets with an air space between them and was thickly painted with a white coating that reflected the sun’s rays. This design was modified in 1884 by Edward Mawley of the Royal Meteorological Society. Standards were set for the locations of the screens and instruments, including their distance above ground level and the direction the door faced.Stevenson screens played a significant part in providing a standardised shelter for all meteorological instruments used by the Australian Bureau of Meteorology from about 1910 until 1994. The readings from the instruments gave the meteorological statistics on which weather forecasts throughout Australia were based. This Stevenson screen was used locally at Cape Otway, along the Great Ocean Road in southwest Victoria, so contributed towards our local forecasts and weather warnings.Stevenson screen, original, from the Australian Bureau of Meteorology’s weather station at the Cape Otway Lighthouse. The screen is a white wooden cupboard with a slanted cover raised above the top. The top has ten drilled ventilation holes, and the sides and door are made of downward-slanting double louvres. Two brass hinges join the door to the lower edge of the screen and a metal fitting at the top edge allows for a padlock closure. The screen is supported on four short legs, each with a hole drilled from side to side for fitting to a frame. Inside the screen are two wooden frames fitted with hooks and screws. The floor has three boards; one across the back and one across the front at the same level, and a board wider than the space between these boards is fitted higher, overlapping them slightly. Inside the screen, a pair of electronic instruments with short electric cables is mounted on a metal bracket with drilled holes in it. One of the instruments is a Relative Humidity (RH) probe. It is 26 cm long and is a glass tube with a filter on one end and an electrical connection on the other. It has inscriptions on its label, showing that was made by Rotronic AG, Switzerland. The other instrument is a Resistance Temperature Device (RTD) thermometer. It is 22.5 cm long and has a narrow metal probe joined to a hexagonal metal fitting. A brass plate on the front of the screen has impressed inscriptions. The screen is Serial Number 01/C0032, Catalogue Number 235862.Stamped into brass plate "CAT. NO. / 253862 / SERIAL NO. 01/C0032" On instrument’s electrical fitting; “CD2” [within oval ‘+’ above S] “Serie693 op65 / 220/380V~16A” On instrument’s glass; “rotronic ag” “SWISS MADE” “CE / CH-8303 / Bassersdorf” Symbol for [BARCODE] “ART NO MP 101A_T4-W4W” “POWER 4.8.30VDC“ “OP. RANGE: 0-100%RH/-40+60° C” “OUT H 0-100% 0-1V” “OUT T -40+60°C -0.4..+0.6V” “SERIE NO 19522 009”flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, cotton region shelter, instrument shelter, thermometer shelter, thermoscreen, thermometer screen, measuring instruments, meteorological instrument, weather recording, weather station, lighthouse equipment, light station equipment, stevenson screen, marine instruments, mercury thermometer, platinum resistance probe, aws, automatic weather station, rotronic ag, swiss made, meteorological device, weather forecast, weather prediction, weather records, meteorological forecast, meteorological record, australian bureau of meteorology, bureau of meteorology, bureau, bom, relative humidity, rh, relative humidity probe, resistance temperature device, rtd, thermometer, temperature, humidity, cape otway, cape otway lighthouse, cape otway light station, rotronic, switzerland, swiss instrument, thomas stevenson, double-louvered walls, edward mawley, royal meteorological society, 01/c0032, serial number, cat. no. 235862, serial no. 01/c00323

A tourist map for the Alexandra, Eildon and Marysville region that was produced by the Alexandra and Eildon Standard newspaper. This tourist map was produced in 1997.A tourist map for the Alexandra, Eildon and Marysville region that was produced by the Alexandra and Eildon Standard newspaper.c 1997/ PUBLISHED BY/ THE ALEXANDRA/ AND EILDON/ STANDARD./ GRAPHICS/ BY THE T.T.S./ EILDON.alexandra, eildon, marysville, victoria, australia, tourist map, alexandra & eildon standard

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge. The booklet sets out in detail the proposals for the implementation of Government policy on occupational health and safety. The objective is to improve standards of health and safety in Victoria. The Government intends involving workers and employers directly in developing new standards and practices. Submissions to be forwarded to the Ministry of Employment and Training by 20 May 1983. Responses from Tom Norwood of Ballarat College of Advanced Education and Mark Hennessy from Lincoln Institute of Health Sciences indicate what is already being done in courses available at Ballarat, Lincoln and Deakin. Mark Hennessy comments that "a united approach might ensure rational decisions by government, beneficial to our mutually complimentary courses." . Booklet - outlining proposals. Nine A4 pages - typedEmblem of Ministry on cover. Signature of Jim Simmonds, Minister; Mark Hennessy, Lincoln Institute of Health Sciences; Tom Norwood, Ballarat College of Advanced Education. Letterhead Ballarat BCAE and Lincoln Instituteviosh, victorian institute of occupational safety and health, ministry of employment and training, public discussion paper, tom norwood, mark hennessy, jim simmonds, workers, employers, ballarat college of advanced education, lincoln institute of health sciences, deakin university

Victorian Institute of Occupational Safety and Health (VIOSH) Australia is the Asia-Pacific centre for teaching and research in occupational health and safety (OHS) and is known as one of Australia's leaders on the field. VIOSH has a global reputation for its innovative approach within the field of OHS management. VIOSH had its first intake of students in 1979. At that time the Institution was known as the Ballarat College of Advanced Education. In 1990 it became known as Ballarat University College, then in 1994 as University of Ballarat. It was 2014 that it became Federation University. VIOSH Australia students are safety managers, senior advisors and experienced OHS professionals. They come from all over Australia and industry. Students are taught active research and enquiry; rather than textbook learning and a one-size fits all approach. VIOSH accepts people into the Graduate Diploma of Occupational Hazard Management who have no undergraduate degree - on the basis of extensive work experience and knowledge The newly-formed Australian College of Occupational Medicine was formed in 1983 in Parkville Victoria. The Chief Censor was David Ferguson. He was requested by the Council to develop training programs for future Fellows of the College. The College does not expect to conduct courses or examinations at present, but may do so in the future. It is interested to know what courses are or likely to become available throughout Australia. As Ballarat College of Advanced Education offers courses in occupational health/hygiene/safety/ergonomic, the College maybe interested in offering courses. If so, details of the courses should be forwarded for for consideration. The College is anxious to identify and promote courses that meet the College's needs and standards. Derek Woolley forwarded the relevant information to the Chief Censor, Dr David Ferguson for consideration. Four A4 pages typed.Letterheads - The Australian College of Occupational Medicine and Ballarat College of Advanced Educationviosh, victorian institute of occupational safety and health, australian college of occupational medicine, chief censor, david ferguson, ballarat college of advanced education, occupational health, hygiene, safety, ergonomics, derek woolley

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) The car immediately behind the locomtive is State Car No. 2 (Melville) which was used as a power unit for the train. https://www.pjv101.net/cd/pages/c160v03.htm Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive, state car no.2 (melville)

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballan, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

X48 entered service in 1977 (Wikipedia https://en.wikipedia.org/wiki/Victorian_Railways_X_class_(diesel)) Train of Knowledge https://en.wikipedia.org/wiki/Train_of_Knowledge The Train of Knowledge was an Australian school camp on wheels, allowing students and teachers to visit multiple locations around Victoria without having to organise accommodation or transport. The train was formed originally with whatever rolling stock was available, but within a few years it had settled to a standard consist made up to carry between 80 and 90 school children, 6 teachers and four railway staff members. As of 1976, the consist used up to five of the six available E type sleeping cars, each with 20 berths, plus the shower car Carey, formerly a horsebox, Melville, a former royal carriage used to provide power for lighting, heating and cooking, 43BPL (a former sitting carriage) used as a classroom, and Avoca as the dining car for the train, with 48 seats allowing serving the whole train meals in two sittings.Digital TIFF file Scan of 35mm Ilford FP4 black and white transparencyballarat railway station, train of knowledge, x48, x-class diesel locomotive

Small Brown/maroon booklet of 24 pages. Includes constitution, subscription, membership, rules of horse racing in general, standard weights for age, weighing, starting, heats, foul riding, nominations, disqualifications, stakes, forfeits, betting, scratching and amendments and additions made to the rules of the Ballarat Turf club approved at a special general meeting held at Craig's Royal hotel on 9 October 1872Ammended rules have been crossed out in red ink ballarat turf club, horse racing, sport of kings,

Before metric measurement was introduced land was measured in chains and links. The chain was a precision part of a surveyor's equipment. It required frequent calibration, yet needed to be sturdy enough to be dragged through rough terrain for years. A standard survey chain is 66 feet (or 20.117m) long and made up of 100 links. Each link is 7.92 inches (approximately 201mm) long, measured from the inside of the loop. The handles are for tensioning the chain in use, they are not part of the length of the chain. In pre-metric units, there were 80 chains to 1 mile (equals 1.609km) This surveyor’s chain has an 8-inch link pitch, with markers at 10 link intervals. This metal surveyor’s chain (or Gunter's Chain) has an 8-inch link pitch, with markers at 10 link intervals, and handles at either end. A Surveyor’s Chain was 66 feet long, and made up of 100 links connected by two rings. A link in measurement includes the two rings at each end. gunter's chain, survey chain, surveyor s chain, perch, rood, surveying

The Micro-Professor I Plus (MPF-IP) was a low cost, versatile microcomputer system featuring sophisticated software and hardware capabilities. (MPF-IP) boasted a display panel with the ability to display 20 characters using 16-segment fonts. All 64 standard ASCII characters could be displayed. The operation of the MPF-IP was controlled by an 8k monitor program which resides in the Read Only Memory (ROM). The monitor, aided by 4k Random Access Memory (RAM), enabled the user to enter a comprehensive set of single keystroke commands, making it easier for the user to use the CPU, memory and I/0 devices. This allowed the user to concentrate of microprocessor software development and application design. The system allowed printing at 48 lines per minute, and the ability to permanently record the commands, data, programs, status and other messaged. Each character printed by the printer is in a 5 by 7 dot matrix. Although the prime purpose of the programming was for machine language object code formed as hexadecimal numbers, the Micro-Professor has an embedded Tiny Basic interpreter for which formation of some of the alpha characters using a standard 7 segment display was ingenious. The program memory consisted of non volatile 2 kilobytes electrically programmable ROM whilst the Random Access Memory came with 2 kilobytes of static RAM but could be upgraded to 4 kilobytes by insertion of another chip. The entire memory space of 64 kilobytes was accessible by way of the terminals on the left hand side of the board. Engineering and Science students from the Ballarat School of Mines and the Ballarat College of Advanced Education used a class set (as they were relatively inexpensive at approx. $100 each) during the mid to late 1980s. Student were encouraged to borrow the Micro-Professors in order to assist in learning how to use them. Only one was ever not returned on time. When pressed to return the device the student confessed that his dog had chewed the plastic case. This is still in our collection complete with bite marks! The Micro-Professor used a Zilog Z80 microprocessor. This was the most powerful of the 8 bit microprocessors at the time. Zilog was derived from the Intel 8080 microprocessor. The Z80 had 158 instructions of which the Intel 78 instructions were a subset. The Intel processor continued on through development in the IBM computers as 8086, 80286, 80386, 80486 and later the pentiums. Zilog lost most of its market share when it developed the 16 bit Z8000 microprocessor. Although the microprocessor was excellent, the lack of peripherals caused users to abandon Zilog products. A brown and gold plastic box containing a microcomputer for use in classrooms. Four manuals are titled 'Micro-Professor MPF-IP user's Manual', 'MPF-I Experiment Manual (Software/Hardware)', Micro-professor MPF-IP experiment Manual (Software/Hardware)' and Micro-Professor MPF-I Monitor Program Source Listing.microcomputer, micro computer, micro professor, electronics

The Australian designed Microbee computer ran at a clock speed of 2 MHz, with a video clock of 12 MHz (displaying 64x16 characters of 512 x 256 pixels) on a modified television of composite monitor. The standard machines were supplied with 16 rt 32 KB of static RAM, and stored programs on a cassette. It was released in June 1982, and could be purchased for AUS$399 in kit form. The Microbee operating system was micro World BASIC.White computer monitor, keyboard, two instruction books and a MicroBee manual. It was the first computer designed and built in Australia. The Ballarat School of Mines was an early user of the MicroBee and had computer labs set up with MicroBee technology. It includes an eight page MicroBee Word Processor Instruction Manual compiled by Pam Baldock,17 July 1984.microbee, computer, pam baldock

This model of a mechanical ore roasting and chloridising furnace was invented and patented by Thomas Edwards of the Edwards Pyrites Smelting and Ore Reduction Company. This new type of furnace produced a high standard of sulphur free ore known as ‘sweet roasted’. Edwards used this model for demonstrations in the USA. Of note is the central large vertical cogwheel (externally driven) which drives small vertical cogwheels via angled cogging drives. These in turn drive a horizontal wheel. Each side of the vertical wheel is set on an opposite side to the horizontal wheel of its neighbours, resulting in opposite direction rotation of neighbouring horizontal wheels. Each horizontal wheel turns a rabble (set of vertical iron paddles) within the furnace. These rabbles, each turning in opposite direction to its neighbours, move the roasting ore in a zig-zag path through the furnace. The elongated furnace with its line of rabbles produced a much ‘sweeter’ roasted ore than could be obtained from a typical tank-shaped furnace. In 1924, when the model was donated to the Ballarat School of Mines, Ballarat’s Courier newspaper reported, ‘Apart from its historical and education value, the gift should serve to stimulate the inventive faculties of the students who have to win fame for the school and for themselves in the metallurgical world.’ The furnace model was donated to Ballarat School of Mines and used as an educational prop from 1924. The model relates to the mining industry which is a significant part of Ballarat's history and heritage. Ballarat School of Mines is the oldest Technical School in Australia and is celebrating 150 years in 2020.Metal model of Edwards' Ore Reduction Furnace. The model includes cogwheels, rabbles and other details. Scale is thought to be around 1:20M259ballarat school of mines, edwards, pyrites, ore reducation, edward retallack, mining, model

Principal Frank Lord gave an ANZAC Day address called "Live Every Day as an Anzac Day". The address started with "Our opportunity is with the children. If we failed i nthe past, lest us begin again now. You are young, and let it be your resolve to live every day as an Anzac Day, and achieve some of the things for which the men of two wars have laid down their lives. Living your days with an air of kindness and decency, you will set an example to the children, and when a country's children are made happier and finer, it will follow that the county will be a happier and finer place." Mt Lord referred to theseven and a half months' occupation of Gallipoli, and the tenacious clinging by Anzac troops to their square mile of territory. Illness, disease and death came to the confined area, but there also came a spirit of self-sacrifice and charity, and a courage whoich scorrned death and won for the Australian troops world renown. Strong men broke under the conditions, but their comrades carried them on, and the prevailing spirit among men was that the had dedicated ther lives to ensuring a decent society at home, free of tyranny. For the achievement of this, they were prepared to die. It became characteristic that when things were at their worst, men were at their best. Discipline did not come from above on Gallipoli, for the men stuck their own standards of discipline, and stuck to them. ... After the 1914-18 war, it was surprising to find head teachers who did not know children of deceased and disabled soldiers in their schools. All teachers should acquaint themselves with this knowledge, and seek assistance from children who are eligible for help from the Repatriation Department. For those pupils who do not come withing the scope of Repatriation, teachers might secure the required help from the Teachers; R.S.L. sub-branch, the Carry-on Club, for from Government Scholarships. Blue soft covered magazine. Contents include: *Principal Frank Lord's Foreward * Rupert Brooke * Hostel Jottings * Looking Back * College photograph Images include: * Queenscliff Camp * Sport * ClubsCover 'File Copy' inside front cover (possibly by Monica Miller) 'With Compliments Ballarat Teachers' College. Xmas 1946'ballarat teachers college, monica miller, m fogarty, james parkinson, beatrix basterfield, patricia rea, nola stanway, valmai sprigg, valda sharp, queenscliffe, lonsdale, thea rowe, student hostel, student residence, wf lord, g kentish, don johnson, neville bunning, henry yeo, irene handley, betty smith, heather fraser, ron schneider, alma sunderland, pauline griffin, betty redford, robert eastcott, kathleen tobin, margaret mcintyre, jean somerville, ken andrews, frank lord

In 1872 William Tulloch and Alexander McLaren constructed a new brick 'Royal Standard Brewery' to the design of architect Henry R. Caselli. They had been operating a much smaller 'Royal Standard' Brewery, possibly since 1859. The Ballarat Brewing Company was established in 1895 and took over operations of the 'Royal Standard'. This new company resulted in the merger of the 'Royal Standard Brewery', James Coglans 'Phoenix Brewery' (Warrenheip) and Henry Leggo's 'Barley Sheaf Brewery' (Creswick Rd). J. Coglan and W. Tulloch were principals of the new company. By 1912 the Ballarat Brewery buildings fronting Armstrong Street were upgraded and new plant installed. Ballarat Brewing Company was well established as a thriving business. In 1926 'Ballarat Bertie' (the cellar-man) advertising image was introduced. It was used successfully until 1994 on 'Ballarat Bitter' labels. During the1940s and 50s the Ballarat Brewing Company was significantly upgraded and extended equipment and buildings. In 1959 Carlton and United Breweries purchased the Ballarat Brewery, its brewing rights and the land (but not the 114 BBC hotels or the Dana Street offices). The Lydiard Street frontage become the 'front' of the CUB Brewery. CUB ceased brewing at the Ballarat Brewery site in 1989 and closed the plant. Four years later the 'brewery site' was purchased by the Ballarat School of Mines to enlarge its campus area as TAFE was a rapidly expanding areas of education. In 1994 plans were developed for the 'Brewery Complex' with careful regard for needed educational facilities and due concern regarding historical aspects of the site and its buildings. There was close consultation and cooperation with the Ballarat City Council during the planning process. In 1995 most of the Brewery buildings were demolished by some special structures and features are preserved. The old brewery chimney was retained as a permanent reminder of the original industrial site, as were two boilers. The SMB Brewery Complex was completed in 1996 and reflects aspects of the former brewery's appearance. It was opened by Prime Minister John Howard on 28 February 1997. Further details at http://guerin.ballarat.edu.au/curator/buildings/site_listing_brewery-complex.shtml Twenty five colour photographs of the Brewery Building at the University of Ballarat SMB (Ballarat School of Mines) campus. The Brewery Building is built on the site of the former Ballarat Brewery and incorporates the chimney and 'Cowley' boilers from that site. ballarat school of mines, henry richards caselli, henry caselli, ballarat brewing, brewery, beer, cowleys foundry, carlton and united breweries

The new Manufacturing Technology Training Centre (MTTC), a part of the proposed Building Construction Training Centre (BCTC), will be a purpose-built, stand-alone, fully fitted-out industry-standard facility. This new space will accommodate current course provision along with specialist training spaces for developing skill requirements in manufacturing technology such as robotics, mechatronics, engineering and industrial automation. Project funding was provided by the Education Investment Fund from the Australian Government Department of Education, Employment and Workplace Relations. The project budget is $18.09m, and the resulting building will have a floor space of 4,755m2. The Manufacturing Technology Training Centre is being built in conjunction with the Technical Education Centre (UBTec). While the buildings will have separate street identities the buildings will be joined with shared amenities areas. UBTec will provide a facility including individual learning spaces, learning studios, administration/office space, circulation, open plan learning space, staff common areas, computer rooms, meeting rooms, staff work areas and kitchen areas as well as car parking and site-wide amenities. While the buildings will have separate street identities the buildings will be joined with shared amenities areas. Funding for the UBTec component of the building is provided by Maintaining the Advantage: Skilled Victorians from the Victorian State Government. A colour poster prepared for the 'turning of the sod' at the site of the proposed University of Ballarat Manufacturing Technology Training Centre (MTTC), Grant Street, Ballarat. The poster was signed on Friday 7 October 2011 at about 11:15 am at the Building Construction Training Centre (BCTC), Grant Street, Ballarat by: Hon. Julia Gillard MP Hon. Catherine King MP (Ballarat ) Prof. David Battersby, Vice Chancellor, University of Ballarat Mayor, Cr Craig Fletcher, Mayor of the City of Ballarat appointed in December 2010 Mrs. Karen Douglas, Chair University of Ballarat Building & Infrastructure Committee The poster is signed by the Prime Minister of Australia, the Hon. Julia Gillard MP; Karen Douglas; the Hon. Catherine King MP (Ballarat ); Prof. David Battersby (Vice Chancellor); Craig Fletcher (Mayor, City of Ballarat)university of ballarat, david battersby, julia gillard, prime minister, catherine king, ubtec, karen douglas, manufacturing technology training centre, grant street, architecural feature

The large plaster Illisos depicted in the back of this image is still held by Federation University Australia. The Ballarat Technical Art School (No. 10) was part of the Ballarat School of Mines and was established in 1907. After conducting classes in various locations around Ballarat a custom built art school was erected on the site of the former Ballarat Circuit Court House, previously used as the initial building of the Ballarat School of Mines. Examples of drawings undertaken by students, as well as some plaster castes are held in the University of Ballarat Historical Collection. The Ballarat Technical art School is the oldest continuous Tertiary Art School in Australia. Sir Alexander Peacock opened the new Ballarat Technical Art School building in July 1915. It cost 10,000 pounds and was constructed by the Public Works Department from plans drawn by the then Art School Principal, Herbert H. Smith. The building contractors were Messrs Gower and Eddards. According to the SMB Annual Report of 1914 'the internal upholstering and fittings have all been carried out in Australian timbers, with Queensland maple largely used throughout.' The building could be described as federation-art deco in style. It features sandstone insertion with sandstone string coursing. The base of the building is rusticated sandstone. The building is functional in design with large metal windows in the south wall to ensure good light into the studios. The northern wall has standard double hung windows. The interior of the building features a carved wooden staircase and cast iron ceiling vents. The rear drawing studios could be made into one large studio by opening panelled timber doors. This opening features classical plaster pilasters with a pediment above. (http://guerin.ballarat.edu.au/curator/buildings/technical_art_school.shtml) Black and white mounted photograph showing eleven students of the Ballarat School of Mines Technical Art School drawing from plaster models of human bodies in various poses and of various scales. The students are in a room of the Ballarat Technical Art School which was custom built for teaching art. The image was reproduced in the 1920 Ballarat School of Mines Students' Magazine. drawing, ballarat school of mines, ballarat technical art school, art studio, plaster caste, gribble building, illisos, hercules, drawing from the antique, visual arts

The author, Francis Bosqui, was the Superintendent of the Standard Consolidated Mining Company's Cyanide Works, Brodie, California. Brown hard covered book of 201 pages. Includes many illustrations including a number of pullout photographs. Contents include history of Chemistry, laoratory tests, design of works, construction details, arrangements of pipes. leaching process, zinc, Nevada, South Africa, Australia. Chapter 14 is the exemplifications of practice: Australia, new Zealand and India. it includes references to Kalgoorlie, Hannan Brownhill mill, South German mine at Maldon, W.B. Gray, Day Dawn Mine in Western Australiacyanide, bosqui, nevada, america, mining

Sir Harold Winthrop Clapp KBE (7 May 1875 – 21 October 1952) was a transport administrator who over the course of thirty years had a profound effect on Australia's railway network. In two decades as its Chairman of Commissioners, he revolutionised Victorian Railways, with unprecedented attention to customer service and innovations such as more powerful locomotives, air-conditioned carriages, and faster services culminating in the introduction of the flagship Spirit of Progress express train. Seconded to the Federal Government in World War II, he played a pivotal role in the manufacture of fighter aircraft in the defence of Australia. As Director-General of Australia's Land Transport Board, he presented a report on railway gauge standardisation that ultimately led to the eventual linking of all Australian mainland capital cities by a uniform rail gauge. (http://en.wikipedia.org/wiki/Harold_Winthrop_Clapp, accessed 02/10/2013)Grey, soft covered, stapled report of 89 pages. "Standardization of Australia's Railway Gauges" by Harold Clapp is a report and recommendation regarding the standarization of Australia's railway gauges. The contents include: * Lines suggested for conversion or new lines to be constructed * scheme of conversion of tracks and structures * scheme of conversion of locomotives and rolling stock * Estimated costs * Associated works * Estimated manpower which the project will absorb in its various phases *Standardization of rolling stock * Other considerations associated with the project * Estimated time involved in the various phases of the work. The report includes 8 maps: * Map of Australia showing the various proposals referred to *Map of Australian railways showing extent of standard gauge if proposals are carried out * Map of Australian railways as of 30 June 1944 *Map of Australia showing principal mileages referred to in the report * Railway Map of Western Australia, 1945 * Railway Map of South Australia, 1945 * Railway Map of Victoria, 1945 * Railway Map of Melbourne Suburbs, 1945 railway, guage, standardization, standardisation, fremantle, perth, kalgoorlie, peterborough, silverton, tramway, tram, train, townsville, dajarra, bourke, cunnamulla, charleville, blackall, longreach, winton, hughenden, townsville, gajarra, birdum, darwin, narrow gauge