Photographers Yeoman & Co operated briefly from 107 Swan Street Richmond from 1890 to 1891. CARTE-DE-VISITE (cdv) 1857-1890 Cartes-de-visite (cdv's) are the most common form of photograph from the nineteenth century, generally measuring two and a half inches by four and an eighth inches (6.3 x 10.5 cm) when mounted, sepia toned, mounted on a card which was generally printed with the photographer's name and address on the back or beneath the portrait. - Frost, Lenore; Dating Family Photos 1850-1920; Valiant Press Pty. Ltd., Berwick, Victoria 1991marg ball collection, shillinglaw family photo album 1, 1890, florence may aldous, percival john aldous, shillinglaw baby, unknown, yeoman & co photographer 107 swan st richmond

Photographers Yeoman & Co operated briefly from 107 Swan Street Richmond from 1890 to 1891. CARTE-DE-VISITE (cdv) 1857-1890 Cartes-de-visite (cdv's) are the most common form of photograph from the nineteenth century, generally measuring two and a half inches by four and an eighth inches (6.3 x 10.5 cm) when mounted, sepia toned, mounted on a card which was generally printed with the photographer's name and address on the back or beneath the portrait. - Frost, Lenore; Dating Family Photos 1850-1920; Valiant Press Pty. Ltd., Berwick, Victoria 1991marg ball collection, shillinglaw family photo album 1, 1890, shillinglaw baby, unknown, yeoman & co photographer 107 swan st richmond

Photographers Yeoman & Co operated briefly from 107 Swan Street Richmond from 1890 to 1891. CARTE-DE-VISITE (cdv) 1857-1890 Cartes-de-visite (cdv's) are the most common form of photograph from the nineteenth century, generally measuring two and a half inches by four and an eighth inches (6.3 x 10.5 cm) when mounted, sepia toned, mounted on a card which was generally printed with the photographer's name and address on the back or beneath the portrait. - Frost, Lenore; Dating Family Photos 1850-1920; Valiant Press Pty. Ltd., Berwick, Victoria 1991marg ball collection, shillinglaw family photo album 1, 1890, shillinglaw baby, unknown, yeoman & co photographer 107 swan st richmond

Photographer Ezra Goulter operated from 23 Chapel St. Prahran between 1878-1890 CARTE-DE-VISITE (cdv) 1857-1890 Cartes-de-visite (cdv's) are the most common form of photograph from the nineteenth century, generally measuring two and a half inches by four and an eighth inches (6.3 x 10.5 cm) when mounted, sepia toned, mounted on a card which was generally printed with the photographer's name and address on the back or beneath the portrait. - Frost, Lenore; Dating Family Photos 1850-1920; Valiant Press Pty. Ltd., Berwick, Victoria 1991marg ball collection, shillinglaw family photo album 2, unknown, 1878-1890, 1885, goulter photographer chapel st prahan, shillinglaw baby

Folkart was operated by Pamnela Hipwell and was permanently closed Januray 2020. "Folkart has been central to the Warrandyte streetscape since 1975 when it took over from Les Gilholm’s milk bar (see photo below). John and Betty Hipwell were amongst the first to start importing Asian clothing, jewellery and homewares. It derived from the era of hippies, meditation, flower power and freedom and introduced a whole new look, floaty dresses and skirts with embroidery and sequin decoration, exotic fabrics and colours and exciting possibilities." - Warrandyte Historical Society (Facebook Jan 8, 2020).35mm colour positive transparency (1 of 25) Mount - Kodak EktachromeProcess Date MAY 88Mfolkart, warrandyte

The first Seafarers Service was held on 23 October 1905 in the St Paul's Cathedral in London to celebrate the Centenary of the Battle of Trafalgar and the death of Vice-Admiral Horatio Nelson on 21 October 1805. Reverend Alfred Gurney Goldsmith launched the first Seafarers Service two years later and the first service was held on Sunday 10 November 1907. National and house flags are used during the annual Seafarers Service. The Melbourne Harbor Trust was established in 1877 to improve and operate port facilities for the growing city of Melbourne. It was superseded by the Port of Melbourne Authority in 1978 and later by the Port of Melbourne Corporation. The service continue to reflect the full range of the maritime activities in Australia. Representatives come from the Royal and Merchant Navies, the commercial world, shipping companies, mission and philanthropic societies, veterans’ associations, labour unions, youth and leisure organisations, but anyone is welcome to attend.Large blue rectangular flag with the Blue Ensign and two white anchors on the rightM.H.T written in black penflag, melbourne harbour trust, m.h.t., seafarers service

This tester was used between 1950 and 1980's. As part of the Occupation, Health and Safety requirements, equipment used to monitor the performance of electricity producing generators, regularly, hand held testers were used to check the insulation and the "earth" pin were up the the required operational levels. As the generators and their ancillary monitoring equipment was spread over a large area and cumbersome to service small hand held devices were required. These had to always be safe for the user to operate. A selected range of high quality meters were recalibrated every two years in the Meter and Calibration Laboratory at Yarraville(near Melbourne) This meter is very significant to The Kiewa Hydro Electricity Scheme because it was an integral part of maintaining the electricity producing water driven generators of the power stations. The reason why this meter was so essential is that provided the safety check on equipment used to monitor each Hydro Generator that they were complying within the grid network parameters. Grid parameters are set so that if there is an electrical fault on the system, that fault can be attended to with a very small change in the output stability of each generator. It is essential that the voltage of the network remain within the set limits. Generators are at Dartmouth, Mackay, Clover, West Kiewa, Yarrawonga, Cain Curran and three Power Stations in the Thornton area.This hand driven current generator produces 500 volts by winding the handle(on funnel curved side) to keep the voltage constant(one minute per test). The whole body is made from caste aluminium. One of the functions of this meter is to test the isolation resistance of any equipment being tested. This is to see if that equipment is safe to handle(no electrical shocks). The second function is to test the earth pin of any portable electrical equipment. The turn key on one side can direct which function is required(marked insulation or continuity). On the top side(enclosed in a glass fronted marked scale) is a continuity scale(top) and an insulation scale(bottom). This is covered , when not in use by "flip up" lid with manufacturer's details and name of the instrument. Opposite the winder are two screw tight knobs. One marked earth(left side) and one marked line(right side). On the top and next to the glass windowed scales in a post manufacture SEC Vic equipment equipment ID number. For carrying purposes there is chromed steel (fold together) handle.The bottom of the unit has two metal "feet" 150mm long by 114mm wideManufacturer's details on top side "MEG" underneath "INSULATION AND CONTINUITY TESTER" below this "constant 500 VOLT pressure" below this "REGISTERED MEG MEGGER TRADE MARK" below this "REG DESIGN NO. 690326" below this "UNITED KINGDOM PATENT Nos. 193746, 197178, 198182, 202062, 202398, 204649, 350715" below this "SUPPLIED BY THE GENERAL ELECTRIC Co. Ltd OF ENGLAND" below this "MAGNET HOUSE, KINGSWAY LONDON W.C.2" 'sec vic kiewa hydro scheme, alternate energy supplies, alpine feasibility studies temperature, rainfall

This case was used between 1950 and 1980's. As part of the Occupation, Health and Safety requirements, equipment used to monitor the performance of electricity producing generators, regularly, hand held testers were used to check the insulation and the "earth" pin were up the the required operational levels. As the generators and their ancillary monitoring equipment was spread over a large area and cumbersome to service small hand held devices were required. These had to always be safe for the user to operate. A selected range of high quality meters were recalibrated every two years in the Meter and Calibration Laboratory at Yarraville(near Melbourne)This leather case contains a meter which is very significant to The Kiewa Hydro Electricity Scheme because it was an integral part of maintaining the electricity producing water driven generators of the power stations. The reason why this meter was so essential is that provided the safety check on equipment used to monitor each Hydro Generator that they were complying within the grid network parameters. Grid parameters are set so that if there is an electrical fault on the system, that fault can be attended to with a very small change in the output stability of each generator. It is essential that the voltage of the network remain within the set limits. Generators are at Dartmouth, Mackay, Clover, West Kiewa, Yarrawonga, Cain Curran and three Power Stations in the Thornton area.This carry case is made from leather hide and cloth covered cardboard insert. The front side has a lockable English made suitcase fitting. It has a broken carry strap (leather) travelling from top and through leather strap holders both sides and on the bottom of the case. A State Electricity Commission of Victoria identification tag riveted onto the top lid "ELECTRICAL ENGINEERING SECTION No. 1483"sec vic kiewa hydro scheme, alternate energy supplies, alpine located electricity generators, mobile measuring equipment

Thomas Broadbent $ sons Ltd was established in 1864 in Huddersfield England. They are an engineering firm , specialists in heavy duty engineering products. By 1893 Broadbent had progressed to steam powered engines for the textile industry. Some of these machines operated for upwards of 50 years Today Broadbent is a leading world designer in the manufacture and maintenance of advanced centrifuges. This document is a manual for a suspended direct steam driven hydro extractor. It shows the various parts , maintenance instructions and erection and working instructions. While it is stamped as Albion Woollen mills which were situated at Geelong, it is likely to have connections to the Warrnambool Woollen Mills.This document is a good example of machinery manual. It is possibly linked to the Warrnambool Woollen Mill. The fact that the company which manufactured these items is still in existence today after 150 years is testament to the quality of the items produced.Cream coloured document with mainly black text with some red text for headings contained in the document. It is printed front and back and is folded in three sections.Stamp at top "Albion Woollen mills Pty Ltd" .4H x 4 in red pencil in top RHC. Printed on front page. Thomas Broadbent & Sons Ltd Central Iron Works Huddersfield. warrnambool, warrnambool woollen mill, broadbent direct steam driven hydo extractors,, broadbent centrifuge

In 1912 the school at Pumpkin Point opened to serve the children of farmers living in the Bete Bolong district. This meant a big change in their way of life because in the past the children had been rowed across the Snowy River each day to attend school at Jarrahmond. Myrtle Bunting was the first HT of the school which had been erected on a block of land purchased from H. Richardson. The school functioned until 1952 when a shortage of pupils caused its closure. As a bus service to Orbost now operated, the school at Pumpkin Point faced permanent closure. J. McKeown bought the building.This item is associated with the history of education in the Orbost districtA small black / white photograph of students from the Bete Bolong State School at the District Sports.on back - S.S. Bete Bolongeducation-orbost bete-bolong-state-school

Used at Orbost railway station for the consignment of goods/freight, in this case, timber to Westall. The Bairnsdale-Orbost railway was opened in 1916 to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987. Orbost Railway Station was opened on Monday 10 April 1916 as the terminus of the Orbost railway line, and closed in 1987. The station was located on the west side of the Snowy River despite the town of Orbost being on the east side of the river, in order to save on the costs of a bridge over the river, which at the time had highly variable levels. This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost.An unused brown/buff coloured goods/freight consignment envelope used by Victorian Railways, this one for timber from Orbost to Westall. 2498-78 VICTORIAN RAILWAYS From ORBOST to WESTALL Contents TIMBER railway-history orbost-bairnsdale-railway

Used at Orbost Railway Station, possibly by the Station Master, between 1944 and 1984. The Bairnsdale-Orbost railway was opened in 1916 to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987. Orbost Railway Station was opened on Monday 10 April 1916 as the terminus of the Orbost railway line, and closed in 1987. The station was located on the west side of the Snowy River despite the town of Orbost being on the east side of the river, in order to save on the costs of a bridge over the river, which at the time had highly variable levels. This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost.Book with a red cover. On the front cover VICTORIAN RAILWAYS Audit Inspectors Remarks Book, Orbost. Inside are numbered and lined pages with hand written information dating from 28/3/1944-13/8/1984, dated and signed by various station masters. Cover has a section missing from the bottom left.VICTORIAN RAILWAYS Audit Inspectors Remarks Book, Orbost.railway-history orbost-bairnsdale-railway

Dross Drossou established a cordial factory in Orbost in the 1930s. He sold his cordial manufacturing business to Phillips and Stone, a Bairnsdale company, in 1948. Glass bottles were refillable until the 1960s, creating a demand for their collection and onsale back to beverage manufacturers via ‘bottle merchants’. A deposit on the bottles was added to all sales as they left the factory. The returned bottles were washed and the old label removed. The inside was cleaned by pushing the bottle onto a revolving brush. The reusing of the bottles went on until the bottle was broken or the top became chipped. Phillips & stone operated a cordial factory in Orbost. This bottle is an example of a product manufacture by a local industry no longer existing.A tall clear glass cordial bottle with a red printed label on the front of the bottle, It has a metal lid.On glass -"manuf. by Phillips & Stone, Bairnsdale & Orbost 52361 preservative added, artificially coloured & flavoured 850ml" On lid - "Lemonade"beverages phillips-stone bottle

Dross Drossou established a cordial factory in Orbost in the 1930s. He sold his cordial manufacturing business to Phillips and Stone, a Bairnsdale company, in 1948. Glass bottles were refillable until the 1960s, creating a demand for their collection and onsale back to beverage manufacturers via ‘bottle merchants’. A deposit on the bottles was added to all sales as they left the factory. The returned bottles were washed and the old label removed. The inside was cleaned by pushing the bottle onto a revolving brush. The reusing of the bottles went on until the bottle was broken or the top became chipped. Phillips & Stone operated in Orbost and Bairnsdale. This bottle is an example of a product manufacture by a local industry no longer existingA clear glass soda syphon bottle with a red pump on the top."Soda Water Phillips & Stone Bairnsdale P S ORBOST (trademark) 30 Fl OZ"phillips&stone syphon bottle

This item was used by Victorian Railways in 1980's. It was inserted onto the side of railway freight wagons. The Bairnsdale-Orbost railway was opened in 1916 to serve the agricultural and timber industry. Because of the decline in traffic and heavy operating costs, the line was finally closed in August, 1987. Orbost Railway Station was opened on Monday 10 April 1916 as the terminus of the Orbost railway line, and closed in 1987. The station was located on the west side of the Snowy River despite the town of Orbost being on the east side of the river, in order to save on the costs of a bridge over the river, which at the time had highly variable levels This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost.A double -sided rectangular shaped label / sign, heavily laminated.Black print on light brown background. On one side : "MASS 31 tonnes LOADED; FROM NOWA NOWA; LIMESTONE TO APM SIDING; TRARALGON". On reverse : "EMPTY FROM TRARALGON; TO APM LIMESTONE SIDING ; NOWA NOWA".freight orbost-bairnsdale-railway

Captain Benjamin Francis (Frank) Helpmann was once the owner of the S.S. CHAMPOIN, then owned it in partnership with S. G. Henty. S.S. CHAMPION was an early steamship and one of the first coastal traders to operate between Melbourne and Portland in Victoria from December 1853 until August 1857, when she collided with the S.S. LIRDY BIRD in the open sea off Cape Otway. CHAMPION was returning from Melbourne, and sank with thirty-two people still on board. The thirty others were saved by the LIRDY BIRD (ref. The Story of a Port : Portland, Victoria, by Noel F. Learmonth)This picture Lithograph) is associated with the S.S. Champion, which is listed on the Victorian Heritage Database VHR S110. The wreck of the SS Champion is significant historically as one of Victoria's worst shipwrecks. As an early steamship it played an important part in the development of and communications between the Western district and Melbourne . Although the site has not yet been located it is predicted to be highly significant archaeologically with the potential to yield information about early coastal shipping and the western district passenger and cargo trade. It is significant technically as an example of an early iron screw steamship, and is part of the western district steamship resource including the SS Casino, SS Coramba and SS Julia Percy.Painting. Lithograph of the schooner S S Champion, hand coloured watercolour, in a cedar frame behind glass. Unusual cross member bracing on the corners of the frame (one missing). Title "Iron S.S. Champion Frank Helpmann Esq. Comr" (in script) on bottom of picture.On the bottom of the painting "Iron S.S. Champion" (in printing), "Frank Helpmann Esq. Comr" (in script) shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwrecked artefact, flagstaff hill maritime village, shipwreck coast, warrnambool, lithograph, frank helpmann, henty

The mitre trimmer is a classic hand-powered tool for picture framers and trim carpenters that has remained relatively unchanged for decades. It is heavy, simple, and sturdily built of cast iron with tempered steel guillotine blades. It is used for taking super accurate, paper-thin slices off the ends of mitres and butt joints, and leaving behind a glassy-smooth surface. Also used in picture frame making or cabinet woodworking, by placing a piece of timber in one side after setting the desired angle and pulling a handle that operates a guillotine blade thereby cutting the timber or decorative trim to the required angle.A significant tool still in use today in many cabinet makers workshops. The subject tool gives insight into how this type of tool development, design and use has not progressed since it’s original invention. It is still for sale from many tool manufacturing companies and use in small craftsmen boutique workshops today as it was many decades ago.Cast Iron wood Trimmer bench like construction on raised feet with 2 adjustable gates. Noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cabinet makers tools, picture framing, mitre cutting, wood trimming

Initially Elvicta was known as Elliot Lucas (hand tools)Ltd, and was established around 1937 based at 38 Summer Row, Birmingham. Around 1950 the firm relocated to Cannock, Staffordshire and by 1965 had moved again to their Church bridge Works also at Cannock. The Elliot Lucas Ltd Elvicta Cabinet and Tool factory as it was known employed over a hundred people and operated from the company's satellite works in Crickhowell southeastern Powys, Wales, near Abergavenny, in the county of Brecknockshire during the 1950s. The company manufactured a range of specialist pliers, nippers and pincers including the brands Elvicta, Electoy and Elect.A tool that is now regarded today as vintage, is collectable and highlights a time when tools were made by hand and how wood was predominately used to manufacture such items. It gives a snapshot of the time before the use of plastics and other synthetic materials which are now used to produce every day objects and tools such as this spirit level.Elvicta brand wooden spirit level made by Elliott-Lucas Ltd England. Level has two levels one vertical one horizontal . Has 2 brass corner protectors Has 530 marked on plate denotes model No and an original label 610 mm long x 60 mm x 30 mmflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

First published in 1932 and designed to fit into an average sized pocket for easy reference, this booklet was published in response to an upswing in the popularity of old time dances and reels. The fourth edition was published in 1937 and the 7th Edition was published in 1944. Robertson and Mullens , publishing company was formed in 1922 by the merger of George Robertson and Company and Melville and Mullen. Mullen and Robertson were friends who had immigrated from Scotland together and had initially set up separate bookselling and publishing businesses. The business operated out of 107-113 Elizabeth St., Melbourne and was delisted as a public company in 1960.A photocopy of Mullens Old Time Dance Guide on white paper with black text featuring an illustration of a man and a woman dancing in formal attire. The reverse side features a description of how the dances were to be performed. The publishers of the guide were Robertson and Mullens of Melbourne.emu creek bush band, australian colonial dance, old time dance guide

VH-UQM (Miss Currie) was the second commercial plane to operate out of Western Junction (after Miss Flinders), the first owned by the Holyman Brothers, which eventually become ANA etc. And we think it was one of the first planes destroyed in WW2, when it was lost in the hangar fire in Broken Hill just after war was declared. It was believed to have been sabotaged by Italian or German workers at Broken Hill at the time. It also was part of the early Flying Doctor service in NSW. Item currently held in Archives Australian National Aviation Museum (ANAM) September 2021

"Last Mail carried by tram in NSW Special Commemorative Trip Operated by the NSW Tramway Historical Assn. during last week of Trams in NSW 19 February 1961". Also has a hand stamp in purple ink "Last tram mail City Railway La Perouse Maroubra Beach Randwick 19 February 1961" The stamp is a 1/- stamp featuring a Melbourne street scene for the 1956 Olympics. Addressed to "Wally Jack 31 York St., Ballarat East Victoria". The post office cancellation stamp "Last Tram Mail Sydney NSW Aust 19FE61"Yields information about the type of materials that a local Ballarat tramway enthusiast collected and reflects the closure of the Sydney tram system in 1961. Envelope - preprinted in dark green and red ink - titled "Last Day Cover" - with a colour stamp in top left hand corner. On rear is another small hand stamp about details of the last tram mail and in the bottom right hand corner the number "1422".trams, tramways, sydney, last tram, post office, postage stamps

Four examples of saw mills placed in station yards were seen on the Beech Forest line of which one was the War Service Homes Commission weatherboard planning mill at Gellibrand. It operated between 1920 until 1923 for both inwards and outwards cartage of timber. As an alternative to Colac Reginald Driver, the WSHC operator, chose Gellibrand in September, 1920 as the site for a mill fitted with the latest double-bladed planning machine. The rough cut boards were sent by train from Driver's mills at Ferguson, Wyelangta and Macknott, off loaded at Gellibrand, and later reloaded for the trip to Colac.B/W. War Service Homes Commission Saw Mill at Gellibrand station in 1920. Six men loading palings onto a NQR wagon.gellibrand; war service homes commission; planing mill; railways;, gellibrand; war service homes commission; planing mill; railways;

The Monument Hill Gold Mine was at the corner of Old Violet Street and Olive Street. It operated until 1947. The shaft was capped, the poppet legs and mullock removed. A house now occupies the site. The Monument Hill Gold mine depth was over 1200 ft. The donor of the photograph is the grandson of Albert Dunstan, and he recalls that 'the mine was fully operational in the 1940's and I was often able to see my Grandfather at work and watched as men stepped into cages to be lowered to their awful occupation'. Donor's great, great grandfather was John Perry Dunstan, a well respected mine manager on the Bendigo goldfield.Two black and white copies of original photograph. Image shows Albert Ernest Dunstan working in the engine room of the Monument Hill Gold Mine, Bendigo. Albert is at the controls of the engine, lowering and raising the mining cage; he is leaning on the support railing around the elevated platform he is standing on. Letter accompanying images describes the donor's family connection to John Perry Dunstan and Albert Ernest Dunstan, he writes that ' the mine was fully operational in the 1940's and I was often able to see my Grandfather at work and watched as men stepped into cages to be lowered to their awful occupation. I was very surprised that today there is a home sitting above what was once a very deep mine'.monument hill gold mine, albert dunstan, old violet street, olive street, engine room, mining cage

Historical Details: The AARG aircraft as NC13782, the 32nd DC-2 to be constructed, was one of the first ten DC-2's purchased by famed American WW1 ace Eddie Rickenbacker in October 1934 to create his famous "Great Silver Fleet" at Eastern Airlines in the USA. Replaced by D. Description: The Douglas DC-2 holds an important place in world and Australian aviation history with its success in the 1934 England to Australia Air Race. Operating as a scheduled KLM airline service, with passengers and airmail, a DC2 PH-AJU "Uiver" placed outright. Level of Importance: Nationaldc2 uiver

The powerhouse in Sunbury began generating electricity for the town in 1910 after the Shire of Bulla saw the benefits of the town having electricity. It functioned until 1926 until the State Electricity Commission took over the project. The post card was written on 21 June 1910 and sent to a Miss Hillary who was living in Benalla. It was from her cousin Mr. Gregor who was a Sunbury resident. From the date on the card, the photograph must have been taken shortly after the powerhouse began operating. An engineer's cottage was built at the rear of the main building and it is still standing on its original site in Jackson Street,The establishment of an electricity supply for the town of Sunbury by the Shire of Bulla in the early decades of the twentieth century was a very advanced decision and brought lots of benefits to the town.A sepia photograph in post card format of the former Electric Powerhouse at Sunbury with a short message and address written on the back of the photograph.ELECTRIC POWERHOUSE/SUNBURY.electricity supplies., gregor, a., sunbury powerhouse

The rectangular weight is rectangular in shape and made of concrete and metal. A closed metal hook is attached to the concrete block, which is encased in metal, and a section of rope is attached. It was used as a counter weight on a canopy that operated as part of a winch located at the [east] landing deck … Originally there were four weights that formed part of a fibreglass canopy which consisted of a staunch, pulley and a rope so when you lifted the canopy up, the weights on either side countered the weight so objects could be moved. The weights were installed in the 1970s and were dismantled along with the winch in the following decade.The weight has first level contributory significance for its provenance and historical value as a component of an earlier apparatus that was used for hoisting goods at the lightstation sea landing.2 x Rectangular shaped weight with with closed hook embedded in concrete surrounded by metal. A section of rope is attached to the hook.

Used to measure wind speed at Gabo Island. Max gust register and wind speed indicator were interconnected to anemometor also on display. Registor and speed / direction indicator redundant due to transition to radio transmitter and computer data recorder. This instrument for measuring wind speed by knots was made by Paton Electrical, Sydney, a radio receiving manufacturing firm which operated until c.1956. It was used in conjunction with the manual anemometer. An instrument now redundant to modern weather forecasting, it is a good example of its kind and has first level contributory significance for its historic value and provenance to the lightstation. It is a good example of its kind and has first level contributory significance for its historic value and provenance to the lightstation.Knots wind speed indicator. Housed in a black & grey metal box shaped enclosure. The front is sloped with a guage and indcator dial. Around this are eight clear orange plastic knobs with directions inscribed next to each knob.Around front in clockwise direction,"N/360, NE/45, 90/E, 135/SE, 180/S, SW/225, W/270, NW/315" On dial, 0 - 70's in 10's, "KNOTS WIND SPEED / STOCK No 6660' - 66-118-7294 / PATON ELECTRICAL SYDNEY"

The preservation of plants and flowers for both decorative and scientific purposes dates back to ancient times. Drying and pressing flowers became a popular hobby and preservation method in Victorian England. The flower press was readily available to buy or simple and inexpensive to create. This flower press was marketed through Henry Buck Pty. Ltd. in Melbourne, Victoria. Henry Buck migrated from England and established his store in Melbourne in 1890. The business dealt primarily in menswear, but also had other domestic lines. The business, trading as Henry Bucks, still operates in Melbourne and several other locations.This item is representative of a popular hobby of the Victorian era.A flower press made from timber with metal clasps and screws. The front is decorated with a parquetry flower design. There are 2 metal strips screwed onto the timber horizontally. These are secured by wing screws which can be adjusted to hold the back and front together. They allow pressure to be adjusted depending on what item is being compressed.Label on back: Left hand side around red shape with HB in the centre "THE SIGN OF/ EXCELLENCE" On right hand side: "LONDON/ Henry Buck PTY LTD. / MELBOURNE"flower drying, victorian era hobbies, henry buck pty. ltd.

Franz Gördes (b.1843) who immigrated to Australia from Germany in 1871. After docking in Melbourne Franz headed for the goldfields at Spring Gully near Beechworth, but didn't strike gold. He returned to his trade and opened a boot shop in Wodonga, which burnt to the ground the day before the opening. Undeterred, he rebuilt and operated the business until his death on 8 June 1928. He was survived by his widow, Margaret as well as six sons and three daughters. Franz Gordes’ Boot & Shoe Warehouse was situated in Sydney Road, now High Street, Wodonga.This item has a well documented provenance and connection to the local history of Wodonga.A black and white photo which has also been digitised. Above shop: Cheap / Boot & Shoe Warehousebusinesses wodonga, franz gördes, geman migrants